4
HQM90AA PRODUCT SPECIFICATION OPERATION: Application: L.B.P. Max. Ambient Temp: 43°C Refrigerant: R600a (1) Max. Steady Discharge Temp: 120°C Operation: Capillary (1,2) Max. Peak Discharge Temp: 135°C Cooling: Static Max. Steady Condensing Temp: 60°C (2) Max. Peak Condensing Temp: 70°C Max. Winding Temp: 130°C Max. Impurities: 30 mg Max.Total Compressor Water Content: 100 mg COMPRESSOR: Displacement: 9.08 cc Oil Type: Mineral Bore: 24.29 mm (4) Viscosity: 7 cSt Stroke: 19.6 mm Suction Muffler: Semi-direct (3) Net Wt: 8,8 kg Case Size: 2 (h = 175.5 mm) Oil Charge: 210 cc ELECTRICAL: Power Supply: 220 - 240V Motor Type: RSIR Voltage Limits: 187 - 264V Frequency: 50 Hz Locked Rotor Current: 9.3 / 4.9 A** Phase: 1 ph Main Winding Resistance at 25°C: 15.6 Ω Start Winding Resistance at 25°C: 21.3 Ω ** Maximum current / Measured after 4 seconds For rated performance, (1) Measured 5cm. from the shell with insulated thermocouples the suction line must be connected to the stub (2) For transient conditions during 'Pull Down' marked 'AS' on the attached drawing. (3) Net weight is with oil but without electrics (4) Measured at 40°C AE 1236.1 Mar '07 Page 1 ACC reserves the right to change the data without prior notice h

PRODUCT SPECIFICATION - the-acc-group. · PDF fileHQM90AA PRODUCT SPECIFICATION ELECTRICAL COMPONENTS: ECC Starting Device: K 100-xx-xx Protector short code Starting Device: PTC-

Embed Size (px)

Citation preview

Page 1: PRODUCT SPECIFICATION - the-acc-group. · PDF fileHQM90AA PRODUCT SPECIFICATION ELECTRICAL COMPONENTS: ECC Starting Device: K 100-xx-xx Protector short code Starting Device: PTC-

HQM90AAPRODUCT SPECIFICATION

OPERATION:

Application: L.B.P. Max. Ambient Temp: 43°CRefrigerant: R600a

(1) Max. Steady Discharge Temp: 120°COperation: Capillary (1,2) Max. Peak Discharge Temp: 135°C

Cooling: Static Max. Steady Condensing Temp: 60°C(2) Max. Peak Condensing Temp: 70°C

Max. Winding Temp: 130°C

Max. Impurities: 30 mgMax.Total Compressor Water Content: 100 mg

COMPRESSOR:

Displacement: 9.08 cc Oil Type: MineralBore: 24.29 mm (4) Viscosity: 7 cSt

Stroke: 19.6 mm Suction Muffler: Semi-direct

(3) Net Wt: 8,8 kgCase Size: 2 (h = 175.5 mm)Oil Charge: 210 cc

ELECTRICAL:

Power Supply: 220 - 240V Motor Type: RSIRVoltage Limits: 187 - 264V

Frequency: 50 Hz Locked Rotor Current: 9.3 / 4.9 A**Phase: 1 ph

Main Winding Resistance at 25°C: 15.6 ΩStart Winding Resistance at 25°C: 21.3 Ω

** Maximum current / Measured after 4 seconds

For rated performance,

(1) Measured 5cm. from the shell with insulated thermocouples the suction line must be connected to the stub

(2) For transient conditions during 'Pull Down' marked 'AS' on the attached drawing.

(3) Net weight is with oil but without electrics

(4) Measured at 40°C

AE 1236.1 Mar '07 Page 1 ACC reserves the right to change the data without prior notice

h

Page 2: PRODUCT SPECIFICATION - the-acc-group. · PDF fileHQM90AA PRODUCT SPECIFICATION ELECTRICAL COMPONENTS: ECC Starting Device: K 100-xx-xx Protector short code Starting Device: PTC-

HQM90AAPRODUCT SPECIFICATION

ELECTRICAL COMPONENTS:

ECC Starting Device: K 100-xx -xx Protector short code

Starting Device: PTC- 8100 UH Starting Device: PTC- 3003-x(1) Starting Device: PTC - 7100D0 UH PTC Resistance: 14 Ω

PTC Resistance: 14 Ω Alt. UH Starting Device: PTC- 3001-x

-x PTC code for different contact versions

PROTECTORS: BDG ¾ Electrica ¾ SENSATA 4TMType AE 15 BU x T 0062 / kk 4TM 265 NFBYY xx

Open °C 115 - 125 °C 115 - 125 °C 115 - 125 °CClose °C 71 - 53 °C 70 - 55 °C 70 - 52 °C

U.T.C 1.70 A 70 °C 1.90 A 70 °C 1.90 A 70 °CTime Check Current 8.00 A 7.5 A 9.2 A (5-15s)

Max. Current 17.5 A 12.0 A 17.2 A (2s max.)Code (if any) FC CF 6F

TypeOpen °CClose °C

U.T.CTime Check Current

Max. CurrentCode (if any)

Alt. protectors: AF 15 BU xCode (if any) D0

BDG 'x' Codes: 6 for terminal boards Mod.89,90

8 for terminal board Mod.91

4 for UH protector with 6.3mm fast-on

5 for UH protector with M3.5 screw

Electrica 'kk' Codes: 05 for terminal boards Mod.89,90

07 for terminal board Mod.91

C5 for UH protector with M3.5 screw

C6 for UH protector with 6.3mm fast-on

Sensata 4TM 'xx' Codes: .. for different contact versions

4TM protectors are for use with UH and ECC terminal boards only.

Protectors with M 3.5 screws can be used on UH electric housings type SP-1454 (with connection board)

and SP-1821 (without connection board). See drawings ELECTRICAL ASSEMBLY (FOR UH) number FTC15;16;17;18.

¾ protectors with 6.3mm fast-on can only be used on UH electric housing type SP-1821 (without connection board).

(1) BDG protector AF type is for use with PTC-7100 only.

AE 1236.1 Mar '07 Page 2 ACC reserves the right to change the data without prior notice

Page 3: PRODUCT SPECIFICATION - the-acc-group. · PDF fileHQM90AA PRODUCT SPECIFICATION ELECTRICAL COMPONENTS: ECC Starting Device: K 100-xx-xx Protector short code Starting Device: PTC-

HQM90AAPRODUCT SPECIFICATION

PERFORMANCE: (Graphs are at ASHRAE conditions) 220V 50Hz

60°C COND.

55°C TEMP.

50°C

45°C

40°C

60°C COND.

55°C TEMP.

50°C

45°C

40°C

40°C TEMP.

45°C TEMP.

50°C

55°C

60°C

40°C COND.

45°C TEMP.

50°C

55°C

60°C

Evaporating Temperature °C -30 -25 -23,3 -20 -15 -10

ASHRAE: Capacity W 102 134 144 172 220 277C.o.P. W / W 1,08 1,24 1,29 1,41 1,59 1,77

CECOMAF: Capacity W 84 110 142 181 227C.o.P. W / W 0,88 1,02 1,16 1,31 1,46

Input Power W 95 108 112 122 138 156Current A 0,76 0,80 0,82 0,85 0,90 0,96

AE 1236.1 Mar '07 Page 3 ACC reserves the right to change the data without prior notice

100

115

130

145

160

175

190

205

220

235

250

265

280

-35 -30 -25 -20 -15 -10 -5Evaporating Temperature (°C)

CapacityWatts

0,75

0,79

0,83

0,87

0,91

0,95

0,99Amps

90100110120130140150160

InputWatts

1,00

1,10

1,20

1,30

1,40

1,50

1,60

1,70

1,80C.o.P.

Test Conditions:Condensing Temp:Liquid Temp:Gas Return Temp:Ambient Temp:

CECOMAF55°C55°C32°C32°C

ASHRAE55°C32°C32°C32°C

Page 4: PRODUCT SPECIFICATION - the-acc-group. · PDF fileHQM90AA PRODUCT SPECIFICATION ELECTRICAL COMPONENTS: ECC Starting Device: K 100-xx-xx Protector short code Starting Device: PTC-

HQM90AAPRODUCT SPECIFICATION

AE 1236.1 Feb '07 Page 4 ACC reserves the right to change the data without prior notice

Upright

Tubes Down

Electrics Up

Recommended Transport Positions when fitted into

appliances

5th Optional N L

N

EL

Circuit Diagram for Terminal Board Frontal Version

1

MotorProtector

PTC

S

Appliance,Lights etc.

Thermostat

5th Optional N L

N

EL

Circuit Diagram for Terminal Board Standard Version

MotorProtector

PTC

S

Appliance,Lights etc.

Thermostat

5th Optional N L

N

EL

Circuit Diagram for Terminal Board Rast 5 Version

1

MotorProtector

PTC

S

Appliance,Lights etc.

Thermostat

x = 26mm or 28.5mmy = 9mm or 10.3mmOther sizes available1. Rubber grommet2. Sleeve3. Washer4. Steel pin5. Clip

Mounting Accessories

y

x

1

2

y

x

1

45 3

Compressor Label

Refrigerant

Electrical Characteristics

VersionManufacturer

Production Date

Check Digit

Serial Number

Model

Approvals

< S U C T I O N

Logo

Bar Code