Product Specification - Display Future Name: IROP040-015-0128128-F Page-1 Rev.:V01 Product Specification Product Name: IROP040-015-0128128-F Customer: Approved by:

Product Name: IROP040-015-0128128-F

Page-1 Rev.:V01

Product Specification


Customer:

Approved by:

Date:

IRICO(Foshan)Flat Display CO.,LTD

Notes: 1、 Please contact IRICO(Foshan) before assigning your product based on this

module specification. 2、 To improve the quality of product, and this product specification is subject to

change without any notice.

IRIC

OC

onfidential


Page-2 Rev.:V01

Revised History Revision Revision Description Date Notes Ver. 01 Initial release 2011/02/16

IRIC

OC

onfidential


Page-3 Rev.:V01

Contents: 1. Features …………………………………… 04 2. Mechanical Data ………………………….. 04 3. Absolute Maximum Ratings ……………... 05 4. Mechanical Drawing ……………………... 06 5. Electrical Characteristics ………………... 07

5.1 DC Electrical Characteristics ……………………….. 07

5.2 AC Electrical Characteristics ……………………….. 08

5.3 Electro-optical Characteristics ……………………… 09

6. Interface And Application ……………….. 10 6.1 Block diagram ……………..………………………….. 10

6.2 Panel layout …………………………………………… 10

6.3 Pin define ……………………………………………… 11

6.4 Application circuit ……………………………………. 12

6.5 Command table ………………………………………. 13

6.6 Power ON and Power OFF Squence …… …………... 14

7. Reliability …………………………………. 15 8. Appendixes ………………………………... 16 9.Warranty …………………………………... 21

IRIC

OC

onfidential


Page-4 Rev.:V01

1.FEATUES ● Display Mode: Passive Matrix ● Display Resolution: 128 x 3 x 128 ● Display Color: 262K Full Color and 65K Full Color ● Extremely thin thickness: 1.41mm ● Drive Duty: 1/128 duty ● Controller Driver: SSD1351 ● Interface: 8/9/16/18-bits 8080 or 6800 series parallel interface Serial Peripheral Interface ● High Contrast: >2000:1 ● Polarizer: Anti-glare

2.Mechanical Data Items Specification Unit

Diagonal A/A Size 1.46 inch Number of dots 128 x RGB x 128 dot

Module Size 33.5 x 46.33 x 1.61 mm3 Panel Size 33.5 x 33.5 mm2

Panel Thickness 1.41±0.1 mm Active Area 26.279 x 26.284 mm2 Dot Pitch 0.0685 x 0.2055 mm2 Dot Size 0.0435 x 0.1855 mm2 Weight 3.43±10% gram

IRIC

OC

onfidential


Page-5 Rev.:V01

3. Absolute Maximum Ratings Parameter Min Max Unit Condition Remark

Supply Voltage(VCI) -0.3 4 V Ta=25℃

IC maximum

rating Supply Voltage(VCC) 10 19 V

Operating Temp. -40 70 ℃

Storage Temp. -40 85 ℃

Humidity - 85 %

Life Time 11,000 Hrs 90cd/m2,50%

checkboard Note(4)

Note:

(1). Voltage Reference to Vss=0V

(2). Maximum Rating are those values beyond which demage to the device

may occur. Functional operation should be restricted to the limits in the

electrical characteristics tables or pin description.

(3). Life time is defined the amount of time when the luminance has

decayed to less than 50% of the initial measured luminance.

(4). Setting of 90cd/m2:

Power supply: VCI =2.8V, VCC=16.5V;

Contrast setting: Master current output=0x0B, Red contrast

setting=0x70 ， Green contrast setting=0x71 ， Blue contrast

setting=0x94;

Duty setting: 1/128 duty;

IRIC

OC

onfidential


Page-6 Rev.:V01

4. Mechanical Drawing

128x

RG

Bx1

28D

ots

Act

ive

Are

a:1.

46"

Con

tact

side

Sing

le T

ape

23x1

3x0.

05m

m

Pola

rizer

t=0.

19m

m

Han

dler

15x5

x0.1

5mm

Det

ail A

Det

ail A

Scal

e 10

x

Not

e:1:

Gen

eral

Tol

eran

ce: +

/-0.0

2mm

2:D

river

IC: S

SD13

51U

3:R

OS

H

Pin

Des

crip

tion

Pin

SYM

BO

LP

inS

YM

BO

L1

NC

2V

LSS

3V

CC

20D

6

4V

CI

21D

7

5V

DD

22D

8

6IR

EF

23D

9

7R

ES#

24D

10

8D

/C#

25D

11

9C

S#

26D

12

10B

S1

27D

13

11B

S0

28D

14

12R

/W#

29D

15

13E

/RD

#

30D

16

14D

0

31D

17

15D

1

32V

SL

16D

2

33V

DD

IO

17D

3

34V

CO

MH

18D

419

D5

35V

CC

36V

SS37

NC

IRIC

OC

onfidential


Page-7 Rev.:V01

5. Electrical Characteristics 5.1 DC Characteristics

Characteristics Symbol Conditions Min. Typ. Max. Unit

Supply voltage for Operation VCI 2.4 2.8 3.5 V

Supply voltage for I/O logic VDDIO 1.6 - VCI

Supply voltage for Display VCC Note 1 16.0 16.5 17.0 V

High Level Input VIH 0.8 x VDD - VDD V

Low Level Input VIL 0 - 0.2 x VDD V

High Level Output VOH 0.9 x VDD - VDD V

Low Level Output VOL 0 - 0.1 x VDD V

Operating Current for VDD No Panel attached

IDD Note 2 - 250 280 uA

Operating Current for VCC No Panel attached

ICC Note 2 - 1.15 1.26 mA

Sleep Mode Current for VDD IDD SLEEP - 1 5 uA

Sleep Mode Current for VCC ICC SLEEP - 1 5 uA

Notes:

1、 Brightness(Lbr) and Supply voltage for Display(VCC) are subject to the

change of the panel characteristics and the customer request.

2、 VCI=2.8V, VCC=16.5V, 100% Display Area turn on.

IRIC

OC

onfidential


Page-8 Rev.:V01

5.2 AC Characteristics

Conditions: VDD-VSS=2.4V to 2.6V, VDDIO-VSS=1.6V to 3.5V,

Ta=25℃

• 8080-series MCU Parallel Interface Timing Characteristics

IRIC

OC

onfidential


Page-9 Rev.:V01

5.3 Electro-optical Characteristics

Parameter Min Typ. Max Units Comments Normal Luminance 70 90 - cd/m2 - Standby Luminance - 20 - cd/m2 -

Display Color

White CIE_x 0.24 0.28 0.32

CIE(1931)

CIE_y 0.28 0.32 0.36

Red CIE_x 0.62 0.66 0.70 CIE_y 0.29 0.33 0.37

Green CIE_x 0.26 0.30 0.34 CIE_y 0.59 0.63 0.67

Blue CIE_x 0.10 0.14 0.18 CIE_y 0.14 0.18 0.22

Dark Room Contrast 2000:1 - - - Response Time - 10 - us - Viewing Angle 160 - - degree - Normal mode current - 30 32 mA All pixels on(1) Standby mode current - 3 4 mA

Standby mode 10% pixels(2)

on(2) Normal mode power consumption - 495 528 mW All pixels on(1)

Standby mode power consumption - 49.5 66 mW Standby mode

10% pixels(2)

Notes:

(1) Normal mode condition: Power supply: VCI=2.8V, VCC=16.5V Contrast setting: Master current output=0x0B Duty setting: 1/128 duty

(2) Standby mode condition: Power supply: VCI=2.8V, VCC=16.5V Contrast setting: Master current output=0x04 Duty setting: 1/128 duty

IRIC

OC

onfidential


Page-10 Rev.:V01

6. Interface And Application 6.1 Panel Layout

128xRGBx128 Dots

~ ~~

Col

1

Col

126

Col

0

com&seg input pins

Col

127

SA

0S

A0

SA

0

SA

127

SA

127

SA

127

6.2 BLOCK DIAGRAM

128xRGBx128Dots OLED Panel

Active Area 1.46"

SSD1351U

IRE

F

VD

DIO

VD

D

RE

S#

CS

#D

/C#

BS

0B

S1

R/W

#E

/RD

#

D0~D17

VC

OM

HV

CC

VS

S

VS

L

VLS

S

VC

I

IRIC

OC

onfidential


Page-11 Rev.:V01

6.3 Pin define Pin No.

Pin Name

Pin Type

Description

1 NC / This pin should keep no connection 2 VLSS P Analog System ground pin 3 VCC P Power supply pin for driving OLED panel 4 VCI P Low voltage power supply 5 VDD P Power supply for core logic operation 6 IREF P This pin is the segment output current reference pin 7 RES# I Reset Signal Input(Active low)

8 D/C# I Selects Command or Data Low: command, High: parameter/data

9 CS# I Selects chip Low: chip is selected and can be accessed High: chip is not selected and cannot be accessed

10 BS1 I MCU BUS interface selection pins 11 BS0 I

12 R/W# I For an 80-serise bus interface, write strobe signal For an 68-serise bus interface, read/write select Low: write, High: read When using SPI, fix it to VDDIO or VSS level

13 E/RD# I For an 80-serise bus interface, read strobe signal For an 68-serise bus interface, bus enable strobe Active high When using SPI, fix it to VDDIO or VSS level

14~31 D0~D17 I/O 18-bit directional data bus 32 VSL P This is segment voltage reference pin 33 VDDIO P Power supply for interface logic level

34 VCOMH P Com signal deselected level. A capacitor should be connetced between this pin and VSS

35 VCC P Power supply pin for driving OLED panel 36 VSS P Ground pin 37 NC / This pin should keep no connection

IRIC

OC

onfidential


Page-12 Rev.:V01

6.4 Application Circuit

This application circuit is for 8080 16-bit parallel interface.

Recommend components:

C1、C5 : 4.7uF/35V(Tantalum Capacitor) ;

C2 、C3、C4: 1uF/16V ;

R1 :50 ohm 1/4W ;

R2 : 1M ohm 1% ;

D1、D2 : RB480K(ROHM) ;

IRIC

OC

onfidential


Page-13 Rev.:V01

6.5 Commands

Refer to the technical manual for the SSD1351

IRIC

OC

onfidential


Page-14 Rev.:V01

6.6 Power ON and Power OFF Sequence

IRIC

OC

onfidential


Page-15 Rev.:V01

7. Reliability

IRIC

OC

onfidential


Page-16 Rev.:V01

8. Appendixes

IRIC

OC

onfidential


Page-17 Rev.:V01

IRIC

OC

onfidential


Page-18 Rev.:V01

IRIC

OC

onfidential


Page-19 Rev.:V01

IRIC

OC

onfidential


Page-20 Rev.:V01

IRIC

OC

onfidential


Page-21 Rev.:V01

9. Warranty

• IRICO(Foshan)Flat Display warrants that the products delivered

pursuant to this specification(or order) will conform to the agreed

specifications for twelve(12) months from the shipping date(Warranty

Period).

• IRICO(Foshan)Flat Display is obligated to repair or replace the

products which are found to be defective or inconsistent, on condition

that the products are stored or used as the conditions specified in the

specification. Nevertheless, IRICO(Foshan)Flat Display is not

obligated to repair or replace the products without charge if the

defects or inconsistency are caused by the force majeure or the

reckless behaviors of the customer.

• After the Warrant Period, all repairs or replacements of the

products are subject to charge.

IRIC

OC

onfidential

Documents

Product Specification - Display Future Name: IROP040-015-0128128-F Page-1 Rev.:V01 Product Specification Product Name: IROP040-015-0128128-F Customer: Approved by: