Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
PRODUCT
SPEC
SHEET CHROME POP UP
WASTE
MATERIAL
Dome: Chrome plated non DZR brass
Waste body: Chrome plated non DZR brass
Back nut: Non DZR brass
Washer: Flat Poly washer & Silicon bowl washer
PRODUCT RANGE
SPEC & PERFORMANCE
Dome washer & mechanism: 2 years
The rest of the waste: 5 years
WARRANTY
Working temperature range: -20°C to 120°C
Working pressure: 400psi
Comply to NZ Building Code
Nominal Size Flange OD(mm) Body Length(mm) Threads
32mm Basin 62 78 BSP 1-1/4”
40mm Basin 68 78 BSP 1-1/2”
40mm Bath 75 48 BSP 1-1/2”
CODE Description
WTPUD32 BRASS POP UP DOME/FLAT WASTE CP 32MM
WTPUDOF32 BRASS POP UP DOME/FLAT WASTE O/F CP 32MM
WTPUD40 BRASS POP UP DOME/FLAT WASTE CP 40MM
WTPUDOF40 BRASS POP UP DOME/FLAT WASTE O/F CP 40MM
WTPUDB40 BRASS POP UP BATH WASTE WIDE FLANGE 40MM
PRODUCT
SPEC
SHEET BLACK POP UP
WASTE
MATERIAL
Dome: Black matt brass
Waste body: Black matt brass
Back nut: Black matt brass
Washer: Flat Poly washer & Silicon bowl washer
PRODUCT RANGE
CARE & INSTRUCTIONS
24 Months Warranty Subject to the “Exclusions” set forth below.
Exclusion: we shall not be liable for intentional; or any
other damages or malfunction resulting from reasons,
including but not limited to any misuse of inadequate
maintenance of the product. Or from force majeure.
Failure to provide purchase invoice as proof will void
this warranty. This warranty is null and void if this
defective product cannot be attributable to the manu-
facturer or distributor.
WARRANTY CODE Description
WTPUD32B BRASS POP UP DOME/FLAT WASTE BLACK 32MM
WTPUDOF32B BRASS POP UP DOME/FLAT WASTE O/F BLACK 32MM
Matt black bathroom ware can keep it’s velvet look finish, by following some
very simple maintenance guidelines,
Cleaning your matt black bathroom ware:
• With warm soapy water
• Use a clean soft microfiber cloth
Do not use solvents, abrasives, acids, waxes or any other chemical based clean-
ers. Bleaches may also discolor the product and should not be used.
SPEC & PERFORMANCE
Dimension: As per drawing
Working temperature range: -20°C to 120°C
Working pressure: 400psi
Comply to NZ Building Code