6
1/6 PRODUCT SELECTION FOR HYDRAULIC FLUIDS ADVANTAGES AND BENEFITS Inherent friction modification and anti-wear performance Excellent thermo-oxidative stability High viscosity index Low volatility High level of biodegradability and renewable carbon contents Excellent pump protection Increased lifetime, delivering dry TOST performance of more than 7000 h Reduced need for shear unstable polymers High flash and fire points, bringing improved fire safety Suitable for the formulation of hydraulic fluids compliant with the latest environmental standards (European Ecolabel, Vessel General Permit, USDA Biopreferred…) Products references, properties & performance next pages Improved energy efficiency implies better shear stability and higher VI; Use of lower environmental impact products induces formulation restrictions; Fire safety is a growing concern. NYCO solutions include a range of superior performance synthetic esters and formulated fluids. Design high performance hydraulic fluids with excellent environmental profile Recent trends in hydraulic systems are putting further strain on hydraulic fluids : Smaller oil sumps increase oil exposure to heat, foam, air and water entrapment; Increasing pump discharge pressures generate stronger wear phenomena; Finer filter pore size requires better cleanliness and less insoluble oxidation products;

PRODUCT SELECTION FOR HYDRAULIC FLUIDS...Balmer Lawrie and Co. Ltd. and NYCO, 608 Surya Kiran Building, 19 Kasturba Gandhi Marg, New Delhi, 110 001 India Tel. : +91 11 2373 0607

  • Upload
    others

  • View
    12

  • Download
    0

Embed Size (px)

Citation preview

Page 1: PRODUCT SELECTION FOR HYDRAULIC FLUIDS...Balmer Lawrie and Co. Ltd. and NYCO, 608 Surya Kiran Building, 19 Kasturba Gandhi Marg, New Delhi, 110 001 India Tel. : +91 11 2373 0607

1/6

PRODUCT SELECTION FOR

HYDRAULIC FLUIDS

ADVANTAGES AND BENEFITS

Inherent friction modification and anti-wear performance Excellent thermo-oxidative stability

High viscosity indexLow volatilityHigh level of biodegradability and renewable carbon contents

Excellent pump protectionIncreased lifetime, delivering dry TOST performance of more than 7000 hReduced need for shear unstable polymersHigh flash and fire points, bringing improved fire safetySuitable for the formulation of hydraulic fluids compliant with the latest environmental standards (European Ecolabel, Vessel General Permit, USDA Biopreferred…)

Products references, properties & performance next pages

Improved energy efficiency implies better shear stability and higher VI;

Use of lower environmental impact products induces formulation restrictions;

Fire safety is a growing concern.

NYCO solutions include a range of superior performance synthetic esters and formulated fluids.

Design high performance hydraulic fluids with excellent environmental profile

Recent trends in hydraulic systems are putting further strain on hydraulic fluids :

Smaller oil sumps increase oil exposure to heat, foam, air and water entrapment;

Increasing pump discharge pressures generate stronger wear phenomena;

Finer filter pore size requires better cleanliness and less insoluble oxidation products;

Page 2: PRODUCT SELECTION FOR HYDRAULIC FLUIDS...Balmer Lawrie and Co. Ltd. and NYCO, 608 Surya Kiran Building, 19 Kasturba Gandhi Marg, New Delhi, 110 001 India Tel. : +91 11 2373 0607

2/6

SYNTHETIC ESTERS

Page 3: PRODUCT SELECTION FOR HYDRAULIC FLUIDS...Balmer Lawrie and Co. Ltd. and NYCO, 608 Surya Kiran Building, 19 Kasturba Gandhi Marg, New Delhi, 110 001 India Tel. : +91 11 2373 0607

3/6

FORMULATED PRODUCTS

Page 4: PRODUCT SELECTION FOR HYDRAULIC FLUIDS...Balmer Lawrie and Co. Ltd. and NYCO, 608 Surya Kiran Building, 19 Kasturba Gandhi Marg, New Delhi, 110 001 India Tel. : +91 11 2373 0607

4/6The above values are typical values. They do not constitute any contractual commitment.

Page 5: PRODUCT SELECTION FOR HYDRAULIC FLUIDS...Balmer Lawrie and Co. Ltd. and NYCO, 608 Surya Kiran Building, 19 Kasturba Gandhi Marg, New Delhi, 110 001 India Tel. : +91 11 2373 0607

5/6

PERFORMANCE TESTS SUMMARY

Nycobase® 8318S, Nycobase® 8345, Nycobase® 3118

The above values are typical values. They do not constitute any contractual commitment.

Page 6: PRODUCT SELECTION FOR HYDRAULIC FLUIDS...Balmer Lawrie and Co. Ltd. and NYCO, 608 Surya Kiran Building, 19 Kasturba Gandhi Marg, New Delhi, 110 001 India Tel. : +91 11 2373 0607

6/6

NYCO, 66 avenue des Champs-Elysées BP 414 - 75366 Paris Cedex 08 - FRANCETel : +33 1 45 61 50 00 - [email protected] - www.nyco.fr ©

201

7 N

yco

- A

ll rig

hts

rese

rved

. Hyd

raul

ic f

uid

s - I

ssue

4

NYCO

Corporate headquarters66 avenue des Champs-Elysées, BP 414, 75366 Paris Cedex 08 FranceTel. : +33 1 45 61 50 00 - [email protected]

UNITED-STATES

NYCO America LLC, a subsidiary of NYCO87 Amlajack Way, Newnan, GA 30265, United-StatesTel. : +1 877 872 6926 - [email protected]

GERMANY

Deutsche NYCO GmbH, a subsidiary of NYCOÜberseering 31, 22297 Hamburg, GermanyTel. : +49 40 411 609 14 - [email protected]

LATIN AMERICA

NYCO representative office in South AmericaBuilding 3845 Panama Pacifico Bd, International Business Park, Panama City, PanamaTel. : + 507 66 452 668

RUSSIA

LLC NYCO Vostok, a subsidiary of NYCO8th floor, Khlebnyi per. 19A, 121069 Moscow, RussiaTel. : +7 495 180 13 62 - [email protected]

INDIA

AVI-OIL India [P] Ltd., a joint venture of Indian Oil Corporation Ltd Balmer Lawrie and Co. Ltd. and NYCO,608 Surya Kiran Building, 19 Kasturba Gandhi Marg, New Delhi, 110 001 IndiaTel. : +91 11 2373 0607 / 08 / 09 - [email protected]