Product List - gsstitan.comgsstitan.com/website/en/pdf/titan.prod.en.pdf · Product List Micropiles to DIN EN 14199 Soil nails to DIN EN 14490 TITAN 30/11 + 30/14 + 30/16 + Accessories

01 TITAN Injection Anchor 30/11 mm, ultimate load 320 kN, yield point 260 kN, acc. to EN 10210-1 S460, continuously left hand threaded, packing unit 50 pcs. in a bundle black, in lengths of 4, 3, 2 m........................................... 3,29 kg/m art.no. 03307006 = 2 m, /..10 = 3 m, /..12 = 4 m, = black duplex-coated = hot-dip galv. and epoxy coated, in lengths of 3 m = art.no. 03307017............................. 3,41 kg/m INOX, stainless steel, material no. 1.4462, with approval Z-30.3-6 in lengths of 3 m = art.no. 03307310.............................. 3,33 kg/m

TITAN Injection Anchor 30 / 11

p.t.o.

06 Washer Plate 200 x 200 x 8 mm, for shotcrete only, hole Ø 36 mm , pack. unit 500 pcs. per wire-mesh pallet black.............................................. art.no. 01307165 2,43 kg hot-galvanized..............................art.no. 01307169 2,50 kg

04 Coupling Nut Ø 38 x 105 mm, with center-stop, with rubber seals, pack. unit 50 pcs. in a sack, 2000 pcs. per wire-mesh pallet black.............................................. art.no. 01307060 0,42 kg hot-galvanized..............................art.no. 01307061 0,42 kg duplex-coated.............................. art.no. 01307062 0,42 kg INOX, stainless steel, material no. 1.4468........................ art.no. 06307360 0,40 kg

05 Spherical Collar Nut SW 46 x 35 mm, inclination ± 7,5°, packing unit 50 pcs.in a sack black.............................................. art.no. 03307051 0,34 kg hot-galvanized..............................art.no. 03307155 0,35 kg INOX, stainless steel, material no. 1.4468........................ art.no. 06307351 0,42 kg

07 INOX Washer Plate 200 x 200 x 12 mm, stainless steel hole Ø 38 mm , material no. 1.4301, art.no. 01307053............................................................ 3,85 kg

Product List

Micropiles to DIN EN 14199Soil nails to DIN EN 14490TITAN 30/11 + 30/14 + 30/16 + Accessories

08 0 - 36° angle adapter plate to be used with washer plate 200 x 200 x 8 mm, black art.no. 01306973............................................................ 0,70 kg

cutting of Injection Anchor 30/11 + 30/14 + 30/16

03 TITAN Injection Anchor 30/16 mm, ultimate load 245 kN, yield point 190 kN, acc. to EN 10210-1 S460, continuously left hand threaded, in lengths of 4, 3 m, black, packing unit 50 pcs. in a bundle art.no. 03307021 = 4 m, /..23 = 3m............................... 2,70 kg/m

TITAN Injection Anchor 30 / 16

13 Washer Plate 300 x 200 x 35 mm, for Wedge Disc, with slot 50 x 70 mm, black art.no. 01307054............................................................ 14,00 kg

09 Washer Plate 150 x 150 x 25 mm for Anchorpiles, hole Ø 40 mm , black art.no. 01306961............................................................ 4,10 kg

10 Protection cap, Ø 193,7 mm , 146 mm high, steel, for permanent anchor piles art.no. 03307643 ........................................................... 4,60 kg

14 Wedge Disc 30/11, 12°, Ø 105 mm, 30 mm high, allows 3 x 12° angle, weldable art.no. 01307093 black................................................. 0,91 kg art.no. 01307094 hot-galvanized................................. 0,91 kg

TITAN Injection Anchor 30 / 1402 TITAN Injection Anchor 30/14 mm, ultimate load 275 kN, yield point 220 kN, acc. to EN 10210-1 S460, continuously left hand threaded, in lengths of 4, 3 m, black, packing unit 50 pcs. in a bundle art.no. 03306912 = 4 m, /..10 = 3m.............................. 2,87 kg/m

11 Steel ball Ø 90 mm, for HD-PE tube Ø 40 mm , max. inclination ± 45°, black art.no. 06306902............................................................ 2,50 kg

12 Plate for steel ball 90, 220 x 220 x 40 mm, without steel ball to be used on for double U-300 walers, spaced max. 150 mm max. inclination ± 45°, black art.no. 06306903............................................................ 11,80 kg

01

02

03

04

05

06 - 07

08

14

13

12

11

10

09

11GSS TITAN Central America

E-Mail: [email protected]: http://www.gsstitan.com

Phone: 507.6679.0066

Product List

Micropiles to DIN EN 14199Soil nails to DIN EN 14490TITAN 30/11 + 30/14 + 30/16 + Accessories

20 Load Indicator for 30/11, to indicate loads of 70,150 and 180 kN, retracts by a total of 30 mm, LOBA approved, galvanized, art.no. 02307027................................................ 0,42 kg

18 Eye bolt, 50 mm eye diam., SWL 150 kN, galvanized, art.no. 03307025................................................ 2,40 kg

19 TITAN Bore Hole Stopper screws on to the anchor, material PE, 150 mm long, to seal bore holes of Ø 33 mm upto 56 mm, art.no. 06307068............................................... 0,10 kg

17 Eye bolt, 35 mm eye diam., SWL 30 kN, galvanized, art.no. 03307024................................................. 0,50 kg

16 Geotextile Fixing Plate, Ø 285 mm, galvanized, for Injection Anchor 30/11 and 40/16 with integrated angle adaptor, inclination ±36°, to be used with Spherical Collar Nut art.no. 01306947................................................. 7,10 kg

15 Claw plate, galvanized, for fixing wire mesh art.no. 02307165................................................. 2,70 kg

24 TITAN Geotextile Sock, Ø 150 mm, upto 10 bar, packing unit 25 m roll art.no. 06307188...............................................

21 TITAN Expansion Shell, for drill hole Ø 46 upto 56 mm, contact area 600 mm², packing unit 50 pcs. art.no. 01307037................................................ 0,77 kg

28 Tensioning + measuring kit, 300 kN capacity, comprising of hollow hydraulic jack with 220 V electric pump, tensioning chair, extension anchor piece with coupler, INOX spherical collar nut, dial gauge with holder and plate, incl. transport box art.no. 06307153............................................... 83,00 kg

25 Hydraulic Jack, hand-operated, 326 kN tension force, bore Ø 33 mm, stroke 63 mm, height 178 mm to 241 mm, including manometer art.no. 06307115................................................

26 Tensioning chair with spanner 500 mm (20") and socket art.no. 01307116................................................ 10,00 kg

27 Dial Gauge M2/50 S, with magnetic tripode 285 mm, art.no. 06307184 (without illustration)................

22 HD-PE tube, Ø 40 x 2,3 x 3000 mm, pack. unit 50 pcs. in a bundle, art.no. 07307145.............................................. 1,10 kg

23 HD-PE tube, Ø 90 x 5,1 x 3000 mm, pack. unit 50 pcs. in a bundle, art.no. 07307245............................................... 4,20 kg

15

16

17

18

19

21

22 - 23

24

25

26

28

20

11

GSS TITAN Central America


Phone: 507.6679.0066

Product List

Micropiles to DIN EN 14199

Soil nails to DIN EN 14490TITAN 30/11 + 30/16 + 30/14 + Accessories

43 Centralizer 30/11, Ø 88 mm, cast iron, black, art.no. 02306986........................................................ 0,27 kg

42 Centralizer 30/11, Ø 70 mm, for 20 mm grout cover, cast iron, art.no. 01307184 black............................................. 0,23 kg art.no. 03307185 galvanized.................................... 0,23 kg

41 Coupling Nut with 4 cutting wings Ø 88 mm, art.no. 01307063........................................................ 0,87 kg

44 Adaptor for Injection Anchor 30/11 to drill bit 40/16, 60 mm art.no. 06307128........................................................ 0,30 kg

40 TITAN Piling Cone, Ø 75 mm, with backwards pointing injection hole, art.no. 06307077........................................................ 0,68 kg

37 TITAN Carbide Cross Cut Drill Bit, Ø 46 mm, art.no. 06307074........................................................ 0,37 kg

39 TITAN Carbide Cross Cut 2-step Drill Bit, Ø 75 mm, drill bit for directional stability, cuts through several hard layers of soil/rock, art.no. 06306962........................................................ 0,84 kg

38 TITAN Carbide Button Drill Bit, Ø 51 mm, art.no. 06306901........................................................ 0,75 kg

35 TITAN Button Drill Bit, Ø 51 mm, HRC 46, packing unit 50 pcs. art.no. 06307181......................................................... 0,34 kg

36 TITAN Button Drill Bit, Ø 55 mm, art.no. 06307064........................................................ 0,38 kg

33 TITAN Button Drill Bit, Ø 42 mm, HRC 46, packing unit 50 pcs. art.no. 06307070........................................................ 0,28 kg

34 TITAN Button Drill Bit, Ø 46 mm, HRC 46, packing unit 50 pcs. art.no. 06307071............................................................... 0,32 kg

32 TITAN Cross Cut Drill Bit, Ø 90 mm, hardened, for mixed soil with obstacles art.no. 06306976........................................................ 1,50 kg

31 TITAN Cross Cut Drill Bit, Ø 76 mm, hardened, for mixed soil with obstacles art.no. 06307078........................................................ 0,90 kg

30 TITAN Hardened Clay Bit, Ø 95 mm, art.no. 01306956........................................................ 0,55 kg

29 TITAN Hardened Clay Bit, Ø 75 mm, art.no. 01307156........................................................ 0,44 kg

2930

31

32

33

34

35

36

37

38

39

40

41

42 - 43

44

11



Phone: 507.6679.0066

06 INOX Washer Plate, 200 x 200 x 15 mm, hole Ø 54 mm, stainless steel, material no. 1.4301 art.no. 01307553....................................................................... 4,58 kg

05 Washer Plate, 200 x 200 x 12 mm, for shotcrete only, hole Ø 56 mm, packing unit 500 pcs. / wire-mesh pallet black............................................................. art.no. 01307555 3,50 kg hot-galvanized............................................. art.no. 01307655 3,55 kg

04 Spherical Collar Nut SW 65 x 50 mm, inclination ± 7°, black............................................................. art.no. 01307550 0,87 kg hot-galvanized............................................. art.no. 01307551 0,89 kg INOX, stainless steel, material no. 1.4468 art.no. 06307651....................................................................... 0,88 kg

TITAN Injection Anchor 40 / 16 01 TITAN Injection Anchor 40/16 mm, ultimate load 660 kN, yield point 525 kN, acc. to EN 10210-1 S460, continuously left hand threaded, black, in lengths of 2, 3, 4 m, pack. unit 50 pcs., art.no. 03307506 = 2 m, /...10 = 3 m, ....................................... 7,17 kg/m in lengths of 4 m, black = art.no. 03307612 duplex-coated = hot-dip galv. and epoxy coated, in lengths of 3 m = art.no. 03307511......................................... 7,30 kg/m INOX, stainless steel, material no. 1.4462, in lengths of 3 m = art.no. 03307610......................................... 7,30 kg/m

03 Coupling Nut, Ø 54 mm x 140 mm, with center-stop, hardened, with 2 rubber seals, packing unit 25 pcs. / sack, 800 pcs. / wire-mesh pallet black............................................................ art.no. 01307560 1,12 kg hot-galvanized............................................ art.no. 01307546 1,13 kg duplex-coated............................................. art.no. 01307561 1,13 kg = hot-dip galv. and epoxy-coated INOX,stainless steel, material no. 1.4468. art.no. 06307660 1,13 kg

cutting of Injection Anchor 40/16 + 40/20

TITAN Injection Anchor 40 / 20 02 TITAN Injection Anchor 40/20 mm, ultimate load 540 kN, yield point 425 kN, acc. to EN 10210-1 S460, in lengths of 3, 4 m, left hand threaded, black, packing unit 50 pcs. in a bundle art.no. 03307520 = 3 m, /...08 = 4 m......................................... 5,60 kg/m

p.t.o.

11 Protection cap, Ø 193,7 mm, 146 mm high, steel, for permanent anchor piles art.no. 03307643 ..................................................................... 4,60 kg

07 0 - 36° angle adapter plate to be used with washer plate 200 x 200 x 12 mm, art.no. 01307673....................................................................... 2,00 kg

12 Steel ball Ø 90 mm, for HD-PE tube Ø 50 mm, max. inclination ± 45°, black art.no. 06307628...................................................................... 2,10 kg

01

13 Plate for steel ball 90, 220 x 220 x 40 mm, max. inclination ± 45°, without steel ball, black art.no. 06306903...................................................................... 11,80 kg

02

03

04

05 - 06

07

08 - 10 08 Washer Plate, 200 x 200 x 30 mm, for anchorpiles, hole Ø 56 mm, black, (will be sold out) art.no. 01307653....................................................................... 8,50 kg

09 Washer Plate, 115 x 115 x 20 mm, for anchorpiles 40/20, hole Ø 56 mm, black, art.no. 01307664....................................................................... 1,61 kg

10 Washer Plate, 125 x 125 x 24 mm, for anchorpiles 40/16, hole Ø 56 mm, black, art.no. 01307663....................................................................... 2,40 kg

11

12

13

Product List


TITAN 40/16 + 40/20 + AccessoriesSoil nails to DIN EN 14490 11



Phone: 507.6679.0066

21 TITAN Bore Hole Stopper, material PE, to seal bore holes upto Ø 95 mm, screw-on type, 100 mm long, art.no. 06307549..................................................

22 Load Indicator for 40/16, to indicate loads of 200, 300 and 400 kN, retracts by a total of 30 mm, LOBA approved, galvanized art.no. 02307527.................................................. 0,59 kg

20 Eye bolt, inside Ø 50 mm, SWL 300 kN, galvanized art.no. 03307586.................................................. 3,10 kg

19 Geotextile Fixing Plate, Ø 285 mm, galvanized, for Injection Anchor 30/11 and 40/16 with integrated angle adaptor, inclination ±36°, to be used with Spherical Collar Nut art.no. 01306947.................................................. 7,10 kg

23 HD-PE tube, Ø 50 x 2,9 x 3000 mm, packing unit 50 pcs. in a bundle art.no. 07307545.................................................. 1,50 kg




27 Tensioning + measuring kit 600 kN capacity, comprising of hollow hydraulic jack with 220 V electric pump, tensioning chair, extension anchor piece with coupler, INOX spherical collar nut, dial gauge with holder and plate, incl. transport box art.no. 06307515.................................................. 145,00 kg

17 Bayonet connector for drilling through soil, reusable 20 to 50 times art.no. 06307624 ................................................. 1,60 kg

18 Bayonet coupler for drilling through soil, art.no. 06307623 ................................................. 1,30 kg

16 Bayonet coupler with plate, Ø 30 mm x 200 mm, to resist uplift art.no. 06307625 ................................................. 8,09 kg

16

17

27

23 - 26

22

21

20

19

18

15 Wedge Disc 40/16, 12°, allows max. 2 x 12° angle, weldable, black. .......................................art.no. 01307593 1,43 kg galvanized................................art.no. 01307693 1,43 kg

14 Washer Plate 300 x 200 x 35 mm, for Wedge Disc, with slot 50 x 70 mm, black art.no. 01307054.................................................. 14,00 kg

14

15

Product List


TITAN 40/16 + 40/20 + AccessoriesSoil nails to DIN EN 14490 11



Phone: 507.6679.0066

Product List

Micropiles to DIN EN 14199Soil nails to DIN EN 14490

p.t.o.

TITAN 40/16 + 40/20 + Accessories

39 TITAN Piling Cone, Ø 90 mm, for displaceable soils, clay or high water table, art.no. 06307572................................................... 2,06 kg

42 Centralizer Ø 88 mm, cast iron, black art.no. 01307584................................................... 0,45 kg

38 TITAN Carbide Cross Cut 3-step Drill Bit, Ø 90 mm, drill bit for directional stability, cuts through several hard layers of soil/rock, art.no. 06307662 .................................................. 1,20 kg

36 TITAN Carbide Button Drill Bit, Ø 70 mm art.no. 06307637................................................... 1,70 kg

37 TITAN Carbide Button Drill Bit, Ø 90 mm, for hard or high quarzite rock, art.no. 06307663 .................................................. 2,40 kg

43 Adapter for Injection Anchor 40/16 to drill bit 52/26, left hand art.no. 06307528................................................... 0,33 kg

40 Guiding device for composite pipe roof, consisting of TITAN Carbide Cross Cut 3-step Drill Bit Ø 90 mm, TITAN injection anchor 40/16, 750 mm long and guiding tube art.no. 03307625................................................... 15,00 kg

33 TITAN Button Drill Bit, Ø 70 mm, HRC 46, with top and radial flushing holes, for wheathered soft rock and gravel, packing unit 25 pcs. art.no. 06307573................................................... 0,68 kg

32 TITAN Cross Cut Drill Bit, Ø 115 mm, hardened, for mixed soil with obstacles, art.no. 01307675................................................... 2,05 kg

31 TITAN Cross Cut Drill Bit, Ø 90 mm, hardened, for mixed soil with obstacles, art.no. 06307671.................................................. 1,05 kg

29 TITAN HPI-Clay bit Ø 110 mm for jetgrouting with 1 carbide-nozzle, Ø 3,5 mm, art.no. 01307657................................................... 1,34 kg

28 TITAN Hardened Clay Bit, Ø 110 mm for soft soil and loose sand/gravel, art.no. 01307656................................................... 1,28 kg

30 TITAN Hardened Clay Bit, Ø 150 mm, art.no. 01307661................................................... 1,50 kg

41 Masthead, screw on type, spot drilling and collecting of the flushing suspension for the pile roof for Jumbos "Atlas Copco Type" art.no. 06307694................................................... 32,00 kg

34 TITAN Carbide Cross Cut Drill Bit, Ø 70 mm, for hard rock, art.no. 06307574 .................................................. 0,98 kg

35 TITAN Carbide Cross Cut Drill Bit, Ø 90 mm for TITAN 40/16, (without illustration) Art.-Nr. 06307635 .................................................. 2,40 kg

43

42

41

40

39

38

36 - 37

34

33

31 - 32

28 - 30

11



Phone: 507.6679.0066

Product List

Drill Drain® and

Drill Drain® TITAN 40/27 hollow bar

45 Drill-Suspension, to stabilize the bore hole (without illustration) art.no. 06307612........................................ 10,00 kg/sac

44 TITAN Drill Drain® Grout, cementitious, premixed in bags of 15 kg, packing unit 10 bags per palett art.no. 06307611......................................... 15,00 kg/sac

46 Drill Drain® TITAN 40/27 hollow bar mm, continously left hand thread, black in lengths of 3 m, packing unit 50 pcs. in a bundle art.no. 03307611......................................... 4,00 kg/m

47 Drill Drain® TITAN Cross Cut Drill Bit, Ø 90 mm, art.no. 06307633......................................... 1,05 kg

48 Drill Drain® TITAN Carbide Button Drill Bit, Ø 90 mm, art.no. 06307634......................................... 1,71 kg

49 Drill Drain® Flushing Ring 63 with seals, (flushing shaft required) art.no. 06308329........................................ 8,00 kg

50 TITAN Drill Drain® mortar pump with colloidal mixer required electric power 380 V, water-connection for hose 1/2", grouting connector and air injector required art.no. 06307630........................................ 420,00 kg

51 Grouting connector for Drill Drain® Grout with handle and lubrication nipple, for high pressure grout-hose NW 25, galvanized art.no. 06307631................................................... 1,50 kg

52 Drill Drain® Air Injector NW 25, art.no. 06307632................................................... 4,24 kg

50

49

48

47

46

51

44

52

11



Phone: 507.6679.0066

03 Spherical Collar Nut SW 80 x 70 mm, with rubber seals, max. inclination ± 10° of washer plate, black.................................... art.no. 03308551 2,20 kg hot-galvanized.................... art.no. 03308651 2,24 kg

p.t.o.

TITAN Injection Anchor 52 / 2601 TITAN Injection Anchor 52/26, ultimate load 925 kN, yield point 730 kN, acc. to EN 10210-1 S460, continuously right hand threaded in lengths of 3 m, packing unit 50 pcs., black................................... art.no.. 03308510 9,87 kg/m hot-galvanized................... art.no.. 03308610 10,50 kg/m duplex-coated = hot-dip galv. and epoxy coated art.no.. 03308517................................................. 10,06 kg/m

cutting of Injection Anchor 52/26

Accessories02 Coupling Nut, Ø 70 x 160 mm, with center-stop, hardened, with 2 rubber seals, packing unit 500 pcs. / wire-mesh pallet black.................................... art.no. 01308560 2,36 kg hot-galvanized.................... art.no. 01308660 2,39 kg

11 Bayonet connector for drilling through soil, reusable 20 to 50 times, art.no. 06308524 ............................................... 2,80 kg

12Bayonet coupler for drilling through soil, art.no. 06308523 ............................................... 2,33 kg

08 Plate for steel ball Ø 110 mm, 230 x 230 x 50 mm, max. inclination 45°, without steel ball, black, art.no. 01308526 ............................................... 14,70 kg

07Steel ball Ø 110 mm, for HD-PE tube Ø 63 mm, max. inclination ± 45°, black, art.no. 01308525................................................ 3,80 kg

10 Bayonet coupler with plate, Ø 35 x 220 mm, to resist uplift art.no. 06308525 ............................................... 11,65 kg

09 Wedge Disc, 12°, allows max. 2 x 12°, black, art.no. 01308593 ............................................... 5,00 kg

06 Protection cap, Ø 193,7 mm, 146 mm high, steel, for permanent anchor piles, art.no. 03307643 ............................................... 4,60 kg

04 Washer Plate, 220 x 220 x 35 mm for anchorpiles, hole Ø 65 mm, (will be sold out) black.................................... art.no. 03308547 12,10 kg hot-galvanized.................... art.no. 03308548 13,20 kg

05 Washer Plate, 145 x 145 x 28 mm for anchorpiles, hole Ø 65 mm black.................................... art.no. 01308563 3,73 kg hot-galvanized.................... art.no. 01308564 3,73 kg

01

02

03

04- 05

06

07

08

09

10

11

12

Product List


TITAN 52/26 with RIGHT HAND THREADSoil nails to DIN EN 14490 11



Phone: 507.6679.0066

23 Centralizer Ø 112 mm, cast iron, black, art.no. 01308595.............................................. 1,20 kg

24 Adapter for Injection Anchor 52/26 to drill bit 73/53, right hand, art.no. 06308578.............................................. 0,70 kg

22 TITAN Carbide Button Drill Bit, Ø 115 mm, for hard or high quarzite rock, art.no. 06308564.............................................. 6,00 kg

19 TITAN Cross Cut Drill Bit, Ø 115 mm, hardened, for mixed soil with obstacles art.no. 06308565.............................................. 2,51 kg

20 TITAN Cross Cut Drill Bit, Ø 130 mm, hardened, for mixed soil with obstacles art.no. 01308535.............................................. 2,90 kg

16 TITAN Hardened Clay Bit, Ø 130 mm art.no. 01308554.............................................. 2,37 kg

18 HPI-Clay Bit, Ø 130 mm for jetgrouting with 1 carbide-nozzle, Ø 3,5 mm, art.no. 01308553.............................................. 2,40 kg

17 TITAN Hardened Clay Bit, Ø 175 mm art.no. 01308546.............................................. 2,60 kg

Accessories

13 HD-PE tube, Ø 63 x 3,6 x 3000 mm, packing unit 50 pcs. in a bundle art.no. 07308545.............................................. 2,10 kg



25 Tensioning + measuring kit 600 kN capacity, comprising of hollow hydraulic jack with 220 V electric pump, tensioning chair, extension anchor piece with coupler, INOX spherical collar nut, dial gauge with holder and plate, art.no. 06308515.............................................. 160,00 kg

13 - 15

19 - 20

16 - 18

22

23

24

25

Product List


TITAN 52/26 with RIGHT HAND THREADSoil nails to DIN EN 14490

21 TITAN Carbide Cross Cut Drill Bit, Ø 115 mm for TITAN 52/26, (without illustration) art.no. 06308536 ............................................. 3,50 kg

11



Phone: 507.6679.0066

03 Spherical Collar Nut SW 80 x 70 mm, max. inclination ± 10° of washer plate, left hand thread black............................ art.no. 03308751........ 2,20 kg galvanized................... art.no. 03308752........ 2,24 kg

Washer plate, threaded headplate, steel ball, wedge disc and Injection Anchors in hot-galvanized and duplex-coated see product list 52/26-1 with right hand thread.

12 TITAN Carbide Button Drill Bit, Ø 115 mm, left hand thread art.no. 06308764............................................. 5,98 kg

10 TITAN Cross Cut Drill Bit, Ø 115 mm, hardened, for mixed soils with obstacles, left hand thread art.no. 01308735............................................. 1,92 kg

11 TITAN Cross Cut Drill Bit, Ø 130 mm, hardened, for mixed soils with obstacles, left hand thread, art.no. 01308736............................................. 2,90 kg

05 Bayonet connector, for drilling through soil, reusable 20 to 50 times, left hand thread art.no. 06308724 ............................................ 2,80 kg

06 Bayonet coupler for drilling through soil, left hand thread art.no. 06308723 ............................................ 2,20 kg

07 TITAN Hardened Clay Bit, Ø 130 mm, left hand thread, art.no. 01308754............................................. 2,43 kg

09 TITAN HPI-Clay Bit, Ø 130 mm, for jetgrouting with 1 carbide-nozzle, Ø 3,5 mm, left hand thread art.no. 01308753 ............................................ 2,40 kg

08 TITAN Hardened Clay Bit, Ø 175 mm, left hand thread, art.no. 01308746............................................. 2,60 kg

04 Bayonet coupler with plate Ø 35 x 220 mm, to resist uplift, left hand thread, bayonet connector required art.no. 06308725 ............................................. 11,65 kg

TITAN Injection Anchor 52 / 26 + Accessories01 TITAN Injection Anchor 52/26, ultimate load 925 kN, yield point 730 kN, acc. to EN 10210-1 S460, continuously left hand threaded in lengths of 3 m, packing unit 50 pcs., black................................. art.no. 03308710 9,87 kg/m hot-galvanized................. art.no. on request 10,50 kg/m duplex-coated = hot-dip galv. and epoxy coated art.no. on request............................................ 10,06 kg/m


02 Coupling Nut, Ø 70 x 160 mm, with center-stop, hardened, with 2 rubber seals, left hand thread, packing unit 500 pcs. / wire-mesh pallet black............................ art.no. 01308760....... 2,36 kg galvanized................... art.no. 01308761....... 2,39 kg

Accessories

01

02

03

04

05

06

07 - 09

10 - 11

12

Product List


TITAN 52/26 with LEFT HAND THREADSoil nails to DIN EN 14490 11



Phone: 507.6679.0066

07 Spherical Collar Nut SW 95 x 70 mm, black........................................ art.no 01307250 2,22 kg hot-galvanized........................ art.no 01307253 2,30 kg

p.t.o.

02 TITAN Micro Pile 73/56 mm, ultimate load 1035 kN, yield point 830 kN, acc. to EN 10210-1 S460, continuously right hand threaded in lengths of 6,25 m, bundle of 24 pcs. black, pack. unit 24 pcs. / bundle art.no 03307244..................................................... 10,75 kg/m

TITAN Micro Pile 73 / 56

03 TITAN Micro Pile 73/45 mm, ultimate load 1585 kN, yield point 1270 kN, acc. to EN 10210-1 S460, continuously right hand threaded in lengths of 3 m, pack. unit 50 pcs. / bundle, black art.no 03307385..................................................... 17,80 kg/m


Cutting of TITAN Micro Pile 73/53, 73/56, 73/45 + 73/35

04 TITAN Micro Pile 73/35 mm, ultimate load 1865 kN, yield point 1430 kN, acc. to EN 10210-1 S460, continuously right hand threaded in lengths of 4 m, black, pack. unit 26 pcs. in a bundle, art.no 03307388..................................................... 21,20 kg/m


TITAN Micro Pile 73 / 53 01 TITAN Micro Pile 73/53 mm, ultimate load 1160 kN, yield point 970 kN, acc. to EN 10210-1 S460, continuously right hand threaded, in lengths of 3 m, packing unit 50 pcs. in a bundle black........................................ art.no. 03307210 14,10 kg/m hot-glavanized........................ art.no. 03307230 14,70 kg/m duplex-coated = hot-dip galv. and epoxy coated ................................................. art.no. 03307213 14,70 kg/m

11 Steel ball Ø 170 mm, for HD-PE tube Ø 90 mm, max. inclination ± 45°, black art.no 06307339 .................................................... 14,50 kg

12 Plate for steel ball 170, 325 x 260 x 70 mm, max. inclination ± 45°, without steel ball, black art.no 06307340 .................................................... 30,00 kg

Accessories for 73/53 + 73/56 + 73/45 + 73/35 05 Coupling Nut Ø 89 x 235 mm, material S460, for TITAN 73/56 and TITAN 73/53 with internal seal, with center-stop, packing unit 350 pcs. per wire-mesh pallet black........................................ art.no 01307260 3,73 kg hot-galvanized........................ art.no 01307256 3,78 kg

06 Coupling Nut Ø 95 x 245 mm, material S460, for TITAN 73/45 and 73/35, with internal seal, with center-stop, packing unit 200 pcs. per wire-mesh pallet black........................................ art.no 01307262 5,70 kg hot-galvanized........................ art.no 01307362 5,75 kg

08 Washer Plate, 250 x 250 x 40 mm, for TITAN 73/45 and TITAN 73/35, hole Ø 80 mm, max. inclination ± 6°, black........................................ art.no 01307255 18,00 kg hot-galvanized........................ art.no 01307355 18,00 kg

09 Washer Plate 175 x 175 x 35 mm, for TITAN 73/56 und TITAN 73/53, hole Ø 80 mm, black........................................ art.no 01307263 18,00 kg hot-galvanized........................ art.no 01307264 18,00 kg

10 Protection cap, 307 x 250 mm, 176 mm high, steel, for permanent anchor piles art.no 03307343 .................................................... 9,50 kg

13 Wedge Disc, 12° for 73/53, 200 mm, allows max. 2 x 12°, black art.no 01307292..................................................... 5,97 kg

01

02

03

04

05 - 06

07

08 - 09

10

11

12

13

Product List


TITAN 73/53 + 73/56 + 73/45 + 73/3511



Phone: 507.6679.0066

30 Tensioning + measuring kit 900 kN capacity, comprising of hollow hydraulic jack, tensioning chair, extension anchor piece with coupler, spherical collar nut, dial gauge with holder and plate, with 220 V electric pump, incl. steel transport box art.no 06307215............................................................. 288,00 kg

28 Centralizer Ø 130 mm, cast iron, black, art.no 01307290.............................................................. 1,39 kg

29 Adapter for Injection-Anchor 73/53 to drill bit 103/78, art.no 06307288.............................................................. 3,08 kg

21 TITAN Hardened Clay Bit, Ø 200 mm, art.no 01307357.............................................................. 6,10 kg

25 TITAN Carbide Button Drill Bit , Ø 130 mm art.no06307234 ............................................................. 7,40 kg

26 TITAN Carbide Cross Cut 3-step Drill Bit, Ø 130 mm, drill bit for directional stability, cuts through several hard layers of soil/rock, art.no 06307362 ............................................................ 5,80 kg

24 TITAN Carbide tipped chisels can be welded to cross cut bits for reaming, art.no 06306930 ............................................................ 0,50 kg

22TITAN Cross Cut Drill Bit, Ø 130 mm, hardened, for mixed soil with obstacles, art.no 01307235.............................................................. 2,85 kg

23 TITAN Cross Cut Drill Bit, Ø 175 mm, hardened, for mixed soil with obstacles, art.no 03307238.............................................................. 4,30 kg

Accessories

17 HD-PE tube, Ø 90 x 5,1 x 3000 mm, packing unit 50 pcs. in a bundle art.no 07307245............................................................. 4,20 kg


19 HD-PE tube, Ø 160 x 9,1 x 3000 mm, packing unit 50 pcs. in a bundle art.no 07307744.............................................................


15 Bayonet connector for drilling through soil, reusable 20 to 50 times, art.no 06307324 ............................................................ 4,97 kg

16 Bayonet coupler for drilling through soil, art.no 06307323 ............................................................ 3,31 kg

14 Bayonet coupler with plate, Ø 40 x 250 mm, to resist uplift art.no 06307225 ............................................................. 17,80 kg

14

15

16

17 - 20

21

22 - 23

24

25

26

28

29

30

Product List


TITAN 73/53 + 73/56 + 73/45 + 73/35

27 TITAN Carbide Tri-Wing Drill Bit Ø 130 mm art.no. 06307242 .................................................. 7,00 kg

27

11



Phone: 507.6679.0066

01 TITAN Micro Pile 103/78 mm, ultimate load 2270 kN, yield point 1800 kN, acc. to EN 10210-1 S460, continuously right hand threaded in lengths of 3 m, packing unit 24 pcs., black.............................art.no. 01307710 25,30 kg/m hot-galvanized............. art.no. 01307711 26,00 kg/m duplex-coated = hot-dip galv. and epoxy-coated ......................................art.no. 01307713 26,20 kg/m


05 Spherical Collar Nut SW 125 x 80 mm for TITAN 103/78 black............................ art.no. 01307750................... 3,42 kg hot-galvanized............. art.no. 01307751................... 3,44 kg

p.t.o.

Accessories for 103/78 + 103/51

04 Coupling Nut 103/51, Ø 132 x 290 mm, with center-stop, with internal rubber seal, packing unit 50 pcs. / pallet, black.............................art.no. 01307760................... 12,52 kg hot-galvanized............. art.no. 01307761.................. 12,70 kg

03 Coupling Nut 103/78, Ø 123 x 255 mm, with center-stop, with internal rubber seal, packing unit 60 pcs. / pallet, black............................ art.no. 01307759................... 7,47 kg hot-galvanized............. art.no. 01307749................... 7,60 kg

cutting of Micro Pile 103/51 + 103/78

02 TITAN Micro Pile 103/51 mm, ultimate load 3660 kN, yield point 2670 kN, acc. to EN 10210-1 S460, continuously right hand threaded in lengths of 3 m, packing unit 13 pcs., black............................ art.no. 01307730 44,60 kg/m hot-galvanized............ art.no. 01307731 45,20 kg/m


12 Steel ball Ø 225 mm, for HD-PE tube Ø 110 mm, max. inclination ± 45°, black art.no. 06307742......................................................... 34,50 kg

13 Plate for steel ball 225, 400 x 310 x 70 mm, max. inclination ± 45°,without steel ball, black art.no. 06307743......................................................... 41,20 kg

15 Bayonet connector for drilling through soil, reusable 20 to 50 times, art.no. 06307724 ........................................................ 10,73 kg

14 Bayonet coupler with plate, Ø 50 x 300 mm, to risist uplift art.no. 06307725 ........................................................ 29,94 kg

11 Protection cap, 300 x 383,5 mm, 256 mm high, steel, for permanent anchor piles art.no. 03307743 ........................................................ 24,60 kg

07 Washer Plate 300 x 300 x 50 mm for Micropile 103/78, hole Ø 110 mm, (will be sold out) black............................ art.no. 01307755.................... 32,60 kg galvanized.................................................................... on request

09 Washer Plate 330 x 330 x 60 mm for Micropile 103/51, hole Ø 110 mm, (will be sold out) black............................ art.no. 01307792 46,50 kg hot-galvanized............................................................. on request

08 Washer Plate 240 x 240 x 50 mm, for Micropile 103/78, hole Ø 110 mm, black............................ art.no. 01307763 18,70 kg galvanized.................................................................... on request

10 Washer Plate 285 x 285 x 70 mm, for Micropile 103/51, hole Ø 110 mm, black............................ art.no. 01307793 39,20 kg galvanized.................................................................... on request

01

02

Product List


TITAN 103/78 + 103/51

06 Spherical Collar Nut SW 125 x 130 mm for TITAN 103/51 black............................. art.no. 01307797 5,91 kg

03 - 04

07 - 10

11

12

14

15

05 - 06

13

11GSS TITAN Central America


Phone: 507.6679.0066

28 Centralizer Ø 165 mm, cast iron, black, art.no. 01307785.................................................... 2,94 kg

23 TITAN Hardened Clay Bit, Ø 280 mm, art.no. 01307757..................................................... 13,65 kg

22 TITAN Hardened Clay Bit, Ø 220 mm, art.no. 01307738..................................................... 12,60 kg

24 TITAN Cross Cut Drill Bit, Ø 175 mm, hardened, for mixed soil with obstacles, art.no. 01307735..................................................... 5,20 kg

26 TITAN Carbide Button Drill Bit, Ø 175 mm art.no. 06307763 .................................................... 10,20 kg

25 TITAN Carbide tipped chisels can be welded to cross cut bits for reaming, art.no. 06306930 ................................................... 0,50 kg

27 TITAN Carbide Tri-Wing Drill Bit Ø 175 mm art.no. 06307797...................................................... 16,40 kg

17 Hinged coupling nut 103/78, Ø 140 x 341 mm, for rotary drilling through water, reusable black................................art.no. 01307737............. 21,50 kg

Accessories16 Bayonet coupler for drilling through soil, art.no. 06307723 .................................................... 7,07 kg

19 HD-PE tube, Ø 280 x 15,9 x 3000 mm, packing unit 50 pcs. in a bundle art.no. 07307743...................................................... 13,35 kg



21 HD-PE tube, Ø 160 x 9,1 x 3000 mm, packing unit 50 pcs. in a bundle art.no. 07307744......................................................

16

17

18 - 21

22 - 23

24

25

26

27

28

Product List


TITAN 103/78 + 103/5111



Phone: 507.6679.0066

06 TITAN Cross Cut Drill Bit, Ø 200 mm, hardened, for mixed soil with obstacles, art.no. 01309035...................................................... 14,00 kg

03 Spherical Collar Nut SW 140 x 140 mm, black, art.no. 01309050...................................................... 9,20 kg

Accessories for 127 / 11102 Coupling Nut 127/111, Ø 139 mm x 255 mm, with center-stop, with internal rubber seal, black, packing unit 50 pcs. per pallet art.no. 01309060...................................................... 7,50 kg

05 TITAN Hardened Clay Bit, Ø 220 mm, art.no. 01309038...................................................... 12,60 kg

01 TITAN Micro Pile 127/111 mm, ultimate load 2320 kN, yield point 2030 kN, acc. to EN 10210-1 S460, continuously right hand threaded in lengths of 3 m, allowable bending moment M = 24 kNm, packing unit 23 pcs., black, art.no. 01309010.......................................................... 28,90 kg/m

TITAN Micro Pile TITAN 127 / 111


04 Washer Plate 250 x 250 x 50 mm for Micropile 127/111, hole Ø 140 mm, black art.no. 01309055...................................................... 18,40 kg

07 TITAN Carbide Button Drill Bit, Ø 200 mm art.no. 06309063..................................................... 20,00 kg

01

02

03

05

04

06

07

Product List


TITAN 127/11111



Phone: 507.6679.0066

p.t.o.

Product List

Accessories for drilling and grouting

Drill Connectorincl. lip seal

for TITAN length mm weight kg art.no.

S 22 x 108 30 283 1,43 06307081

S 22 x 82,5 30 272,5 1,24 06306942

S 22 x 159 30 349 1,40 06307142

S 22 x 108 40 298 1,62 06307577

S 22 x 108 R 32 283 1,40 06308087


for TITAN length mm weight kg art.no. .

S 25 x 108 30 283 1,45 06306938

S 25 x 159 30 349 1,75 06307083

Flushing Ring 40 with seals, completeart.no. 06308310

Flushingshaft

for TITANInjection Anchor

length mm weight kg art.no.

S 22 x 108 30 323 06308320

S 25 x 108 30 323 06308322

S 25 x 159 30 374 06308324

S 22 x 108 R 32 323 06308326

S 22 x 108 40 368 06308328

Flushing Head S 22 x 108, for TITAN 30, with integrated holderart.no. 06307099...................................................................... complete set of seals for Flushing Ring 40, (2 pieces, 40 x 50 x 7 mm)art.no. 06307105...................................................................... absorber disc 55 x 40,5 x 10 mm for flushing shaft S 22 und S 25art.no. 06307010......................................................................



R 32 30 380 4,63 06307084

R 32 40 380 7,50 06307579

R 32 R 32 380 5,00 06308081

spare lip seal 30 x 38 x 6 mm for drill connector R32art.no. 06307620



R 38 30 380 4,63 06307085

R 38 40 380 7,50 06307580

R 38 52 left 380 14,00 06308761

R 38 R 32 380 5,00 06308085



T 38 30 380 4,63 06307079

T 38 40 380 7,50 06307581

T 38 52 right 380 14,00 06308581

T 38 52 left 380 14,00 06308760

T 38 R 32 380 5,00 06308079

spare lip seal 36 x 44 x 8 mm for drill connector R 38 und T 38art.no. 06307613



T 45 30 380 4,63 06307179

T 45 40 380 7,50 06307679

T 45 52 left 380 14,00 06308759

T 45 R 32 380 5,00 06308088

spare lip seal 42 x 50 x 5,7 mm for drill connector T 45art.no. 06307614

11



Phone: 507.6679.0066

Product List


Flushing Ring 63 with selas, completeart.no. 06308330.............................................................................................................................

forTITAN

lengthmm

Flushing shaft R 32art.no.


Flushing shaft T 38art.no.

Flushing shaft T 45art.no.

30 265 06308340 06308342 06308344 06308346

40 265 06308348 06308350 06308352 06308354

R 32 265 06308356 06308358 06308360 06308362

52 right 365 06308364 06308368 06308372 06308376

52 left 365 06308366 06308370 06308374 06308378

complete set of seals for Flushing Ring 63, (2 lip seals 63 x 78 x 10 mm, 2 bearing rings 63 x 5,1 x 1,5 mm and2 guide rings 63 x 68 x 6,3 mm)art.no. 06307104............................................................................................................................. absorber disc 90 x 63,5 x 21 mm for Flushing shaft with Flushing Ring 63art.no. 06308280..............................................................................................................................

Flushing Ring 100 with seals, completeart.no. 06308410.............................................................................................................................

for TITAN

lengthmm


Flushing shaft H 64art.no.

Flushing shaft RT 70art.no.

30 365 06308420 06308422 06308424

40 365 06308426 06308430 06308432

R 32 365 06308456

52 right 365 06308434 06308438 06308442

52 left 365 06308436 06308440

73 365 06308444 06308446 06308448

103 450 06308450 06308452 06308454

complete set of seals for Flushing Ring 100, (2 seals 100 x 120 x 12 mm, and 2 guide rings 100 x 105 x 9,7 mm)art.no. 06307295.............................................................................................................................

Flushing Ring 160 with seals, completeart.no. 06308460.............................................................................................................................

for TITAN

lengthmm



Flushing shaft RT 70art.no.



30 300 06308469

40 300 06308470 06308472

52 right 300 06308474 06308476

73 300 06308478 06308480 06308481

103 300 06308484 06308486

127 300 06308492 06308488 06308490

complete set of seals for Flushing Ring 160, (2 seals 160 x 185 x 15 mm, and 2 guide rings 160 x 165 x 15 mm)art.no. 06307771.............................................................................................................................

Seals for flushing shaft: TITAN 40............................ Ø 28 mm................................ art.no. 06307565................................................................ TITAN 52............................ Ø 43 mm................................ art.no. 06308566................................................................ TITAN 73............................ Ø 63 mm................................ art.no. 06307296................................................................ TITAN 103............................ Ø 89 mm................................ art.no. 06307765................................................................ TITAN 127............................ Ø 114 mm (PUR seal) art.no. 06309072................................................................

11

01

01

01

02

03

01

01

02

03



Phone: 507.6679.0066

Product List


01 Holder, spring action, for flushing head 30/11 S 22, bolts on to the mast of the drill rig, art.no. 06307114...................................................... 7,28 kg

02 Holder, spring action, for Flushing Heads for R 32*, R 38*, T 38*, T 45*, to be fixed on to the mast of the drill rig, fixing position: hammer fully extended and spring released art.no. 06307123...................................................... 5,90 kg

03 Holder for flushing head R 55, C 64, RT 70, C 90 and H 112 for all drill rigs art.no. 06307280...................................................... 2,45 kg

09 Turbo-mixing tube for simultaneous flushing with air and water, for better removal of cuttings in clay, upto 100 bars pressure, air connection with claw coupler, all others Rd 32 x 1/8“, art.no. 01306940...................................................... 3,30 kg

05 Grouting Connector for 40/16, thread Rd 32 x 1/8“ male, for high pressure grout-hose DN 20, with handle and lubrication nipple, galvanized, art.no. 06307592....................................................... 1,50 kg

04 Grouting Connector for 30/11, thread Rd 32 x 1/8“ male, for high pressure grout-hose DN 20, with handle and lubrication nipple, galvanized, art.no. 06307091...................................................... 0,92 kg

06 Grouting Connector for 52/26 thread Rd 32 x 1/8“ male, for high pressure grout-hose DN 20, with handle and lubrication nipple, galvanized, right hand thread art.no. 06308592..................................................... 1,80 kg

07 Grouting Connector for 52/26 thread Rd 32 x 1/8“ male, for high pressure grout-hose DN 20, with handle and lubrication nipple, galvanized, left hand thread art.no. 06308792...................................................... 1,80 kg

08 High Pressure Hose, DN 20, upto 100 bar art.no. 06307096.................................................... 5 m lang art.no. 06307098....................................................10 m lang

10 Ball Valve for max. pressure of 100 bar, both ends with hose fittings Rd 32 x 1/8“ art.no. 06307095......................................................

11 Thread Connector R 32 x 1/8“ male fitting, both sides...................... art.no. 06307045 female to pipe thread 3/4“ BSP male art.no. 06307046

01

02

03

04 - 07

08

09

10

11

11



Phone: 507.6679.0066

Documents

Product List - gsstitan.comgsstitan.com/website/en/pdf/titan.prod.en.pdf · Product List Micropiles to DIN EN 14199 Soil nails to DIN EN 14490 TITAN 30/11 + 30/14 + 30/16 + Accessories