PRODUCT LINE MATRIX: INSTANT ACCESS POINTS

PRODUCT LINE MATRIX: INSTANT ACCESS POINTS

CATEGORY REMOTE OUTDOOR

FEATURE OAW-AP103 OAW-AP204/205 OAW-AP205H OAW-AP114/115 OAW-AP214/215 OAW-AP224/225 OAW-AP228 OAW-AP324/325 OAW-RAP3WN/R AP3WNP OAW-RAP108/109 OAW-RAP155/155POAW-AP274/AP275/AP277

Number of radios 2 2 2 2 2 2 2 2 1 2 2 2

Supported bands Dual concurrent Dual concurrent Dual concurrent Dual concurrent Dual concurrent Dual concurrent Dual concurrent Dual concurrent 2.4GHz Dual concurrent Dual concurrent Dual concurrent

Wi-Fi standards 802.11a/b/g/n 802.11a/b/g/n/ac 802.11 a/b/g/n/ac 802.11a/b/g/n 802.11 a/b/g/n/ac 802.11a/b/g/n/ac 802.11 a/b/g/n/ac 802.11 a/b/g/n/ac 802.11b/g/n 802.11a/b/g/n 802.11a/b/g/n 802.11a/b/g/n/ac

Radio MIMO type 2 x 2:2 2 x 2:2 2x2:2 3 x 3:3 3x3:3 3 x 3:3 3x3:3 4X4:3 for MU-MIMO, 4X4:4 for SU-MIMO

2 x 2:2 2 x 2:2 2 x 2:2 (2.4 GHz), 3 x 3:3 (5 GHz)

3 x 3:3

Max number of BSSIDs (per radio)

16 16 16 16 16 16 16 16 16 16 16 16

Max number of associated clients per radio

Tunnel: 255 Other: 110

255 255 Tunnel: 255 Other: 110

255 255 255 255 Tunnel: 255 Other: 110



255

Max transmit power (per radio chain, MCS0) 2.4 GHz/5 GHz

18 dBm 18 dBm

18 dBm 18 dBm

21 dBm21 dBm

20 dBm 19 dBm

18 dBm 18 dBm

18 dBm 18 dBm

23 dBm23 dBm

18 dBm18 dBm

17 dBm 18 dBm 18 dBm

18 dBm 18 dBm

23 dBm 23 dBm

RF connectors (RP-SMA)

No 2 x DB (AP204) No 3 x DB (AP114) 3x DB (AP-214) 3 x DB (AP224) 6x RP-SMA 4X DB(AP-324) no 2 x DB (R AP108) no 6 Nf (AP274)

Integrated antennas

2 x omni downtilt

4 x omni downtilt (AP205)

4x semi-directional 6 x omni downtilt (AP115)

6x omni downtilt (AP-215)

Omni downtilt (AP225)

No 8X omni downtilt (AP-325)

2 x 2.4 GHz omni 4 x omni (RAP109)

5 x omni 3 x 2.4 GHz omni (AP275) 3 x 5 GHz omni (AP275)

TPM module Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes

Network interfaces

1 x GE 1 x GE 2x GE, 1x GE with PoE, 1x passthrough RJ-45

1 x GE 1x GE 2 x GE 2x GE 2x GE 3 x FE 1 x GE + 1 x FE 5 x GE 2 x GE

Jumbo frame support on uplink

No Yes No No Yes Yes Yes Yes No No No Yes

USB host interface

No No Yes Yes Yes Yes No Yes Yes Yes Yes No

Console port Header RJ-45 Header RJ-45 RJ-45 RJ-45 Micro USB RJ-45 Header RJ-45 Header Micro USB

PoE PD power 3af 3af 3at 3af/3at 3af/3at 3af/3at No 3af/3at No 3af/at No 3at

PoE PSE No No No No No No No No No/802.3af No No/802.3at (1x) or 802.3af (2x)

No

DC power support

12V 12V 12V 12V 12V 12V N/A 12V 12V/48V 12V 12V/54V N/A

Ships with AC-to-DC adapter

No No No No No No No No Yes (cord not included for RAP3WNP)

No Yes (cord not included for RAP155P)

No

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. (November 2015)

CATEGORY REMOTE OUTDOOR

FEATURE OAW-AP103 OAW-AP204/205 OAW-AP205H OAW-AP114/115 OAW-AP214/215 OAW-AP224/225 OAW-AP228 OAW-AP324/325 OAW-RAP3WN/R AP3WNP OAW-RAP108/109 OAW-RAP155/155POAW-AP274/AP275/AP277

Temperature range

0ºC to +40ºC 0ºC to +40ºC 0 C to +40 C 0ºC to +50ºC 0º C to +50º C 0ºC to +50ºC -40 C to +60 C 0° C to +50° C 0ºC to +40ºC 0ºC to +40ºC 0ºC to +40ºC -40°C to +65°C

Enclosure type Plastic Plastic/metal Plastic Plastic/metal Plastic/metal Plastic/metal Plastic Plastic/metal Plastic Plastic Plastic Plastic/metal

Enclosure volume (mm)

150 x 150 x 41.5

150 x 150 x 41.5 86 x 40 x 150 180 x 180 x 45 180 x 180 x 45 203 x 203 x 54 222 x 150 x 75 203 X 203 X 57 129 x 109 x 64 181 x 160 x 72 185 x 245 x 65 230 x 230 x 190 (AP274)230 x 240 x 270 (AP275)

Weight (unit only, with desk mount)

300 g 380 g 375 g 650 g 650 g 750 g 1,225 g 950g 180 g 460 g 700 g 2700 g (AP274)2400 g (AP275)

Plenum rated No Yes No Yes Yes Yes No Yes No No No No

TAA/FIPS version available

No No No Yes Yes Yes No Yes Yes Yes Yes No

Lifetime warranty

Yes Yes Yes Yes

Minimum software version

AOS-W 6.4.0.0 InstantOS 4.1.0.0


Aruba Instant 4.2.0 AOS-W 6.3.1.0 InstantOS 4.0.0.0

ArubaOS 6.4.2.0 InstantOS 4.1.1.0


ArubaOS 6.4.3.0 ArubaOS 6.4.4.0 InstantOS 4.2.1.0





Spectrum analysis support

Yes Yes Yes Yes

Maximum power consumption (excluding USB, PoE PSE)

8 W (DC)9.5 W (PoE)

11.7 W (DC)12.5 W (PoE)

12W (DC) / 12W (PoE)

12 W (DC)13 W (PoE)

13.6W (DC) 14.9W (PoE)

15 W (DC)12.5 W/15.5 W (PoE)

23W 18.5W (DC)20W (PoE)

4.0 W/5.5 W 12.5 W 15.5 W 23 W

Max IPsec encrypted wired throughput (RAP mode)

10 20 20 20 20 20 100 100 20 20 100 20

http://enterprise.alcatel-lucent.com

http://enterprise.alcatel-lucent.com/trademarks

ALCATEL LUCENT CAMPUS NETWORK ON DEMAND SERVICEThe Alcatel-Lucent Campus Network on Demand service is part of a suite of services that enables authorized partners to deploy, operate and maintain field-proven Alcatel-Lucent Enterprise LAN and Wi-Fi® network infrastructure under a pay-per-use pricing model. The appeal of a consumption-based pricing model is that the expenses are operational, in line with the actual usage requirements, and not a sunk capital outlay. Campus Network on Demand provides flexibility in both service duration and the size of the network, and both can be expanded or reduced based on actual business needs.

In addition, Campus Network on Demand employs network usage-based billing, which can reduce costs for inactive ports during breaks, the off-season, weekends and holidays.

Campus Network on Demand delivers the LAN and Wi-Fi core and access infrastructure for large buildings and branches. Customers choose the technology that best matches their network infrastructure requirements. To optimize the management, maintenance and operations of this service for the launch, a standard architecture and set of products has been chosen.

Campus Network on Demand is comprised of different components based on the service selected.

The service includes a local area network (LAN) core, LAN access for the local network in the customer’s main premises.

Optionally, the customer can add remote networks for branch or remote offices, as well as Wi-Fi services.

There are two general configurations for LAN access:• Standard: includes Alcatel-Lucent

OmniSwitch® 6450 for local and remote networks

• Enhanced: includes OmniSwitch 6860E for local and remote networks

Several options are available to provide Wi-Fi connectivity in the local area networks:• Standard: includes the WLAN instant

access point Alcatel-Lucent OmniAccess® IAP205

• Enhanced: includes the WLAN controller OmniAccess 4030 and a choice of access points: AP205 for standard services, or AP325 for enhanced services

Customers can also add Wi-Fi access points to the list of equipment for remote networks. When selected, OmniAccess IAP205 is included.

OmniVista NMS

Network Services

- WAN Routing / VPN

- NAT, NAT-PT, FW, Web Proxy

- DHCP / DNS

* * *

* * *

OmniSwitch 6900

IEEE 802.3ac

1G

10G

Servers

2x10G

2x40G

2x1G

1G

OmniSwitch 6450OmniSwitch 6860E

OmniAccess WLANAcces Points

Figure: Examples of typical network deployment models

2

ALCATEL LUCENT CAMPUS NETWORK ON DEMAND SERVICEALCATEL-LUCENT ENTERPRISE DATA SHEET

Local network, Core switch OmniSwitch 6900-X72

The OmniSwitch 6900 Stackable LAN switch model X72 is a compact, high-density 10 gigabit Ethernet (GigE) and 40 GigE platform. In addition to high performance and extremely low latency, it offers OpenFlow™, Shortest Path Bridging (SPB), Quality of Service (QoS), layer-2 and layer-3 switching, as well as system and network level resiliency. It is a perfect fit for a highly redundant LAN core in the campus network.

The OmniSwitch 6900-X72 is part of the OmniSwitch 6900 family of switches. For more information, please visit:http://enterprise.alcatel-lucent.com/?product=OmniSwitch6900&page=overview

FAMILY OMNISWITCH 6900

Campus Network on Demand model reference POS6900-X72F-XX

1000BaseT PoE+ ports n/a

10GBase SFP+ ports 48

40GBase QSFP ports 6

Dedicated VC/Stack ports n/a

Max units in Virtual Chassis 6

AC power supplies 2

AC field-replaceable power supply yes

Available PoE budget n/a

Airflow Front to back

Width 44 cm (17.32 in)

Depth 55.9 cm (22.0 in)

Height 4.4 cm (1.73 in)

Weight 10.9 kg (24.0 lb)

Operating temperature 0°C to 45°C (32°F to 113°F)

Storage temperature -10 to 70° C (14 to 158° F)

Operating humidity 5% to 95% non-condensing

Storage humidity 5% to 95% non-condensing

SERVICE AND SUPPORTDuring a service subscription, Business Partners accredited for the Alcatel-Lucent Campus Network On Demand Service can obtain 24/7 support through the Technical Assistance Center for all hardware and software issues. Support services include bug fixes, software upgrades and advanced hardware replacement. Customer service and support to Business Partners’ customers is depending on individual agreed contracts and service levels.

PRODUCT FACTSThe following is a list of on-premise equipment from the Alcatel-Lucent OmniSwitch LAN, OmniAccess Wi-Fi and OmniVista Network Management family that are included as part of the Campus Network on Demand service.

http://enterprise.alcatel-lucent.com/?product=OmniSwitch6900&page=overview


3


Local and remote network, access switch type: standardOmniSwitch 6450-P48X

The OmniSwitch 6450 Stackable LAN switch model P48X is a modern stackable gigabit Ethernet LAN access platform. It offers 780 Watts of Power over Ethernet plus (PoE+) across 48 gigabit Ethernet access ports, 10 gigabit Ethernet ports, QoS and layer-2 switching. It is a perfect fit for a standard LAN access in the campus network.

The OmniSwitch 6450-P48X is part of the OmniSwitch 6450 family of switches. For more information, please visit: http://enterprise.alcatel-lucent.com/?product=OmniSwitch6450&page=overview

Local and remote network, access switch type: EnhancedOmniSwitch 6860E-P48

The OmniSwitch 6860E Stackable LAN switch model P48 is a modern stackable gigabit Ethernet LAN access platform. It offers 1500 Watts of PoE+ across 48 gigabit Ethernet access ports, 10 gigabit Ethernet ports, QoS and layer-2/3 switching. In addition, it supports application visibility for predictive analysis of application behavior in the networks. With its redundant power supply, it is a perfect fit for enhanced LAN access in the campus network.

The OmniSwitch 6860-P48X is part of the OmniSwitch 6860 family of switches. For more information, please visit:http://enterprise.alcatel-lucent.com/?product=OmniSwitch6860E&page=overview

PHYSICAL CHARACTERISTICS


Campus Network on Demand model reference POS6450-P48-XX

1000BaseT PoE+ ports 48



Dedicated VC/Stack ports 2 (20 Gb/s)


AC power supplies 1

AC field-replaceable power supply no

Available PoE budget 780 W

Airflow Side to side


Depth 39.1 cm (15.4 in)




Storage temperature -40°C to 75°C (14°F to 167°F)





Campus Network on Demand model reference POS6860E-P48-XX

1000BaseT PoE+ ports 48



Dedicated VC/Stack ports 2 (40 Gb/s)


AC power supplies 2

AC Field replaceable power supply yes

Available PoE budget 1500 W



Depth 35 cm (13.78 in)



Operating temperature 0°C to 40°C (32°C to 104°F)






http://enterprise.alcatel-lucent.com/?product=OmniSwitch6860E&page=overview

http://enterprise.alcatel-lucent.com/?product=OmniSwitch6860E&page=overview

4


Local network: Wireless Scale: standard, Access Point type: standard. Remote network: Point type: standard.OmniAccess IAP205

This compact dual-radio access point delivers wireless data rates of up to 867 Mb/s to 5 GHz devices with 802.11ac technology, leveraging two spatial multiple-input and multiple-output (MIMO) streams while simultaneously supporting 2.4 GHz 802.11n clients with data rates of up to 300 Mb/s. With its four integrated omni-directional downtilt antennas, the IAP205 is a perfect fit for standard scale Wi-Fi access in the campus network.

The OmniAccess IAP205 is part of the OmniAccess WLAN family. For more information, please visit:http://enterprise.alcatel-lucent.com/docs/?id=24269

Local network: Wireless Scale: enhanced, Access Point type: anyOmniAccess 4030

The OmniAccess 4030 is a modern wireless LAN controller that manages larger Wi-Fi networks. It offers enhanced firewall and Wi-Fi protection capabilities with the included Policy Enforcement Firewall Next Generation (PEFNG) and Wireless Intrusion Protection (WIP) licenses. With sufficient capacity to manage all access points and high availability, it is a perfect fit for enhanced scale Wi-Fi access in the campus network.

The OmniAccess 4030 is part of the OmniAccess WLAN family. For more information on this controller and the WIP and PEFNG licenses, please visit: http://enterprise.alcatel-lucent.com/docs/?id=24339


FAMILY OMNIACCESS WLAN

Campus Network on Demand model reference POAW-IAP205

WLAN standard IEEE 802.11a,b,g,n,ac

Wi-Fi radios 2

Bluetooth radio 0

MIMO 2x2

MU-MIMO no

Integrated antennas 4 omni-directional

1000BaseT ports 1

PoE power consumption 12.5 W

Mounting brackets included

Restricted domains USA, Japan, Israel, None











Campus Network on Demand model reference POAW-4030

Gigabit Ethernet combo ports 8

Power consumption 55 W


Maximum controlled aps 64

Max users/devices 4096

Max Firewall sessions 65536



Width 31 cm (12 in)









http://enterprise.alcatel-lucent.com/docs/?id=24269




5


Local network: Wireless scale: enhanced, Access point type: standardOmniAccess AP205

This compact dual-radio access point delivers wireless data rates of up to 867 Mb/s to 5 GHz devices with 802.11ac technology, leveraging two spatial multiple-input and multiple-output (MIMO) streams, while simultaneously supporting 2.4 GHz 802.11n clients with data rates of up to 300 Mb/s. The AP205 has four integrated omni-directional downtilt antennas. In combination with the OmniAccess 4030 Wireless LAN controller, the AP205 is the perfect fit for standard Wi-Fi access in campus networks that need high volume access points.

The OmniAccess AP205 is part of the OmniAccess WLAN family. For more information, please visit:http://enterprise.alcatel-lucent.com/docs/?id=24269

Local network: Wireless Scale: enhanced, Access Point type: enhancedOmniAccess AP325

This multifunctional dual-radio access point delivers wireless data rates of up to 1733 Mb/s to 5 GHz devices with 802.11ac technology, leveraging four spatial multiple-input and multiple-output (MIMO) streams while simultaneously supporting 2.4 GHz 802.11n clients with data rates of up to 800 Mb/s. In addition it is equipped with a Bluetooth beacon for specific applications. With its eight integrated omni-directional downtilt antennas the IAP325 is a perfect fit for enhanced-scale, high-density Wi-Fi access in the campus network.

The OmniAccess AP325 is part of the OmniAccess WLAN family. For more information, please visit:http://enterprise.alcatel-lucent.com/docs/?id=26703



Campus Network on Demand model reference POAW-AP205


Wi-Fi radios 2

Bluetooth radio 0

MIMO 2x2

MU-MIMO no


1000BaseT ports 1

PoE power consumption 12.5 W













Campus Network on Demand model reference POAW-AP325


Wi-Fi radios 2

Bluetooth radio 1

MIMO 4x4

MU-MIMO 4 streams


1000BaseT ports 2

PoE power consumption 20 W


Restricted domains Controller based

Width 20 cm

Depth 20 cm

Height 5.7 cm

Weight 1.36 kg (3 lb)









6


Uplink Multimode Fiber10GBASE-SR SFP+

The small form-factor pluggable (SFP) is a compact, hot-pluggable transceiver used to connect access and core switches through multi-mode fiber (MMF) optical cabling over a distance of up to 300 meters with a bandwidth of 10 Gb/s.

Uplink Singlemode Fiber10GBASE-LR SFP+

The small form-factor pluggable (SFP) is a compact, hot-pluggable transceiver used to connect access and core switches through single mode fiber (SMF) optical cabling over a distance of up to 10 kilometers with a bandwidth of 10 Gb/s.


FAMILY OPTICAL TRANSCEIVERS

Campus Network on Demand model reference P-SFP-10G-SR

Dimension standard SFP+

Optical connector type LC

Standards supported IEEE 802.3 Clause 52

Optical fiber type Multi-mode fiber

Wavelength 850 nm 850 nm

Optical power output -7.3 to -1.3 dBm

Receiver sensitivity -11.1 dBm

Transmission distance ~ 300 m



FAMILY OPTICAL TRANSCEIVERS

Campus Network on Demand model reference P-SFP-10G-LR

Dimension standard SFP+

Optical connector type LC

Standards supported IEEE 802.3 Clause 52

Optical fiber type Single mode fiber

Wavelength 850 nm 1310 nm

Optical power output -8.2 to -0.5 dBm

Receiver sensitivity -12.6 dBm

Transmission distance ~ 10 km


enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. (January 2016)

Management and reportingOmniVista 2500 NMS appliance

This appliance is supplied with every Campus Network on Demand service purchased to enable the provision of authorized partners’ managed services. By default it enables administrative shutdowns of LAN access ports to avoid abuse. With enhanced management, the user has the ability to look at the topology and status of the network, as well as generate predictive analyses of the network’s data and application usage.


FAMILY NETWORK MANAGEMENT

Campus Network on Demand model reference POV2500-CPE-EU

ProcessorOne Intel Xeon E5-2623 v3 Series 4-core 3.0GHz

Memory 32 GB RAM (4*8 GB RDIMM)

Connectivity2 x 1GbE embedded Ethernet adapter — RJ-45 Ports

Storage2 hot-pluggable hard driveSATA 500 GB capacity — speed 7,200 rpm

AC field replaceable power supply 2 hot-swappable power supplies per unit


Width 43.66 cm (17.11 in)

Depth 60.76 cm (23.90 in)

Height RACK 1U - 4.29 cm (1.69 in)

Weight 10 kg (22 lb)

Operating temperature 10° to 35°C (50° to 95°F)

Storage temperature 30° to 60°C (22° to140°F)





PRODUCT LINE MATRIX: ANTENNAS

MODEL TYPE BAND(S) TYPICAL GAIN

POLARIZATION & ELEMENT TYPE

BANDWIDTH (DEGREES)

VSWR MAX INPUT POWER

CONNECTOR(S) DIMENSIONS (mm)

OPERATING TEMPERATURE

ANTENNA PATTERNS

H-PLANE E-PLANE

AP-ANT-1B

Omnidirectional

2.400 GHz - 2.500 GHz

3.8 dBi

Vertical, linear

360 50

<2.0 : 1 2 watts1 x RP-SMA/m,direct-mount

127 x 39 x 19 -10º C to +55º C

120

150

180

210

240

6090

30

0

330

300270

120

150

180

210

240

6090

30

0

330

300270

120

150

180

210

240

6090

30

0

330

300270

120

150

180

210

240

6090

30

0

330

300270

4.900 GHz - 5.875 GHz

5.8 dBi 360 25

AP-ANT-1F

Omnidirectional

2.400 GHz - 2.500 GHz

2.0 dBi

Vertical, linear

360 50

<2.0 : 1 2 watts1 x RP-SMA/m,direct-mount

127 x 39 x 19 -10º C to +55º C

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

10

-40

45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

10

-40

45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

10

-40

45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

10

-40

45

60

90

105

120

135

150165180

75

4.900 GHz - 5.875 GHz

5.0 dBi 360 25

ANTENNA LINE MATRIX: INDOOR ONLY (RP-SMA)

2

OmniAccess Wireless Access Points at a GlanceALCATEL-LUCENT ENTERPRISE PRODUCT LINE MATRIX: ANTENNAS



BANDWIDTH (DEGREES)




ANTENNA PATTERNS

H-PLANE E-PLANE

AP-ANT-13B

Downtilt omni

2.400 GHz - 2.500 GHz

4.4 dBi

Vertical, linear downtilt

360 60 <2.0 : 1 2 watts1 x RP-SMA/m, pigtail cable

55 x 55 x 16 -40º C to +70º C

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

-40

45

60

90

105

120

135

150165180

75

-180165150

135

120

105

90

75

60

45

3015

-165-150

-30

-20

-10

0

-40

-135

-120

-90

-75

-60

-45

-30-150

-105

-180165150

135

120

105

90

75

60

45

3015

-165-150

-30

-20

-10

0

-40

-135

-120

-90

-75

-60

-45

-30-150

-105

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

-40

45

60

90

105

120

135

150165180

75

4.900 GHz - 5.900 GHz

3.3 dBi

AP-ANT-16

Downtilt 3 x 3 MIMO omni

2.400 GHz - 2.500 GHz

3.9 dBi


360 60 <2.0 : 1 2 watts3 x RP-SMA/m, pigtail cable

308 x 92 x 22 -40º C to +70º C

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

-40

45

60

90

105

120

135

150165180

75

-180165150

135

120

105

90

75

60

45

3015

-165-150

-30

-20

-40

-135

-120

-90

-75

-60

-45

-30-150

-105

-180165150

135

120

105

90

75

60

45

3015

-165-150

-30

-40

-135

-120

-90

-75

-60

-45

-30-150

-105

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

-40

45

60

90

105

120

135

150165180

75

-10

0 0

0

-20

-10

0

4.900 GHz - 5.900 GHz

4.7 dBi

ANTENNA LINE MATRIX: INDOOR ONLY (RP-SMA)

3




BANDWIDTH (DEGREES)




ANTENNA PATTERNS

H-PLANE E-PLANE

AP-ANT-17

120 Degree 3 x 3MIMO sector

2.400 GHz - 2.500 GHz

6.0 dBi

Vertical, linear dual-slant +/-45 degrees

120 65

<1.7 : 1 50 watts3 x RP-SMA/m, pigtail cable

200 x 200 x 33 -40º C to +70º C

1010-27075

60

45

30

15

0

-15

-30

-45

-60-75

-255-240

-30

-20

-10

0

-40

-225

-210

-180

-165

-150

-155

-120-105-90

-195

-180165150

135

120

105

90

75

60

45

3015

-165-150

-30

-20

-10

0

-40

-135

-120

-90

-75

-60

-45

-30-150

-105

1010-27075

60

45

30

15

0

-15

-30

-45

-60-75

-255-240

-30

-20

-10

0

-40

-225

-210

-180

-165

-150

-155

-120-105-90

-195

-180165150

135

120

105

90

75

60

45

3015

-165-150

-30

-20

-10

0

-40

-135

-120

-90

-75

-60

-45

-30-150

-105

4.900 GHz - 5.875 GHz

5.0 dBi 150 75

AP-ANT-19

Dual band omni

2.400 GHz - 2.500 GHz

3.0 dBi

Vertical omni

360 50

<2.0 : 1 10 watts1 x RP-SMA/m, pigtail cable

245 (h) -40º C to +70º C

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

-40

45

60

90

105

120

135

150165180

75

180165150

135

120

105

90

75

60

45

3015

-165-150

-30

-20

-10

0

-40

-135

-120

-90

-75

-60

-45

-30-150

-105

180165150

135

120

105

90

75

60

45

3015

-165-150

-30

-20

-10

0

-40

-135

-120

-90

-75

-60

-45

-30-150

-105

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

-40

45

60

90

105

120

135

150165180

75

10

10 10

10

5.150 GHz - 5.875 GHz

6.0 dBi 360 20

AP-ANT-20

Dual-band omni, direct mount

2.400 GHz - 2.500 GHz

2.0 dBi

Linear, vertical. Omnidirectional patterns at all frequencies.

360 80 <20 : 1 2 watts1 x RP-SMA with articulating mount

79 x 35.3 x 10 with articulat-ing mount at 90 degree angle

102 x 14.8 x 10 fully extended

-10° C to +55° C (+14° F to +131° F

4.900 GHz - 5.875 GHz

2.0 dBi

ANTENNA LINE MATRIX: INDOOR/OUTDOOR (RP-SMA)

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

10

-40

45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

10

-40

45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

10

-40

45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

10

-40

45

60

90

105

120

135

150165180

75

4




BANDWIDTH (DEGREES)




ANTENNA PATTERNS

H-PLANE E-PLANE

AP-ANT-25A

AP-ANT-25A is a dualpolarized antenna withnominal 90° H x 90° Vbeamwidths. Thisantenna is well suited for2.4-GHz and 5-GHzsector coverage foraccess.

2.4 GHz - 2.5 GHz

5 dBi min Slant +/- 45° 100 90 2:1 max 20 watts75 cm (30”) RP-SMApigtails x2

200 x 200 x 32

-45° C to +70° C

4.9 GHz - 6.0 GHz

AP-ANT-25

AP-ANT-25 is a dualpolarizedantenna withnominal 90° H x 90° Vbeamwidths. Thisantenna is well suited for2.4-GHz and 5-GHzsector coverage forWi-Fi access.

2.4 GHz - 2.5 GHz


200 x 200 x 33 -45°C to +70°C

4.9 GHz - 6.0 GHz

AP-ANT-28

Dual-polarized antennawith nominal 60° H x 60° Vbeamwidths for 2.4-GHzand 5-GHz sector coverage

2.4 GHz - 2.5 GHz

7.5 dBi min

Slant +/- 45° 60 60 2.1 max 6 watts75 cm (30”) RP-SMApigtail

197.5 x 197.5 x 34.5

-45° C to +65° C

4.9 GHz - 6.0 GHz

ANTENNA MATRIX: OUTDOOR/INDOOR (N-TYPE)

5




BANDWIDTH (DEGREES)




ANTENNA PATTERNS

H-PLANE E-PLANE

AP-ANT-35A

AP-ANT-35A is amultipolarized antennawith nominal 90° H x 90° Vbeamwidths. Thisantenna is well suited for2.4-GHz and 5-GHzsector coverage foraccess.

2.4 GHz - 2.5 GHz

5 dBi minVertical and slant +/- 45°

100 90 2:1 max 20 watts75 cm (30”) RP-SMApigtails x3

200 x 200 x 32

-45° C to +70° C

4.9 GHz - 6.0 GHz

AP-ANT-35

AP-ANT-35 is amultipolarized antennawith nominal 90° H x 90°V beamwidths. Thisantenna is well suited for2.4-GHz and 5-GHzsector coverage for Wi-Fiaccess.

2.4 GHz - 2.5 GHz


200 x 200 x 33 -45°C to +70°C

4.9 GHz - 6.0 GHz

AP-ANT-38

Multipolarized antennawith 60° H x 60° Vbeamwidths for2.4-GHz and 5-GHzsector coverage

2.4 GHz - 2.5 GHz

7.5 dbi min

V, and Slant +/- 45°

60 60 2.1 max 6 watts3x RP-SMA pigtail cable

197.5 x 197.5 x 34.5

-45° C to +65° C

4.9 GHz - 6.0 GHz


6




BANDWIDTH (DEGREES)




ANTENNA PATTERNS

H-PLANE E-PLANE

ANT-3X3-D905 ANT-3x3-D905

is amulti-polarized antennawith 90° horizontal x 90°vertical beamwidths. Thisantenna is well suited for2.4-GHz and 5-GHzsector Wi-Fi coverage.

2.4 GHz - 2.5 GHz

5 dBi minV and slant +/- 45°

100 90 2:1 max 20 wattsN-type female x3(RF cables not included)

200 x 200 x 33 mm

-45°C to +70°C

4.9 GHz - 6.0 GHz

ANT-3X3-D100

ANT-3x3-D100 is amultipolarized antennawith 90° H x 90° Vbeamwidths. Thisantenna is well suited for2.4-GHz and 5-GHzsector coverage foraccess.

2.4 GHz - 2.5 GHz

5 dBi minVertical and slant +/- 45°

100 90 2:1 max 20 watts

N-type female x3 (RFcables not included)

200 x 200 x 33 -45°C to +70°C

4.9 GHz - 6.0 GHz

ANT-3X3-D608 Multipolarized

3x3antenna with60° horizontal x60° vertical beamwidths.This antenna is wellsuited for 2.4-GHz and5-GHz Wi-Fi coverage.

2.4 GHz - 2.5 GHz

7.5 dBi min

V and slant +/- 45°

60 60 2.1 max 6 wattsN-type female x3(RF cables not included)

197.5 x 197.5 x 34.5

-45° C to +65° C

4.9 GHz - 6.0 GHz


7




BANDWIDTH (DEGREES)




ANTENNA PATTERNS

H-PLANE E-PLANE

AP-ANT-90

Downtilit diversity omni

2.400 GHz - 2.500 GHz

3.0 dBi


360 57-61

<2.0 : 1 2 watts2 x N-type/m, pigtail cable

157 x 93 x 23 -40º C to +70º C

-30

-20

-10

-30

-20

-10

-30

-20

-10

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10 42

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

42

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

42

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

42

60

90

105

120

135

150165180

75

4.900 GHz - 5.990 GHz

3.0 dBi 360 55-59

AP-ANT-92

120 Degree 3 x 3 MIMO sector

2.400 GHz - 2.500 GHz

6.0 dBi

Linear dual-slant ≈45 degrees

120 60 <1.7 : 1 50 watts3 x N-type/m, pigtail cable

200 x 200 x 33 -40º C to +70º C

1010-27075

60

45

30

15

0

-15

-30

-45

-60-75

-255-240

-30

-20

-10

0

-40

-225

-210

-180

-165

-150

-155

-120-105-90

-195

-180165150

135

120

105

90

75

60

45

3015

-165-150

-30

-20

-10

0

-40

-135

-120

-90

-75

-60

-45

-30-150

-105

1010-27075

60

45

30

15

0

-15

-30

-45

-60-75

-255-240

-30

-20

-10

0

-40

-225

-210

-180

-165

-150

-155

-120-105-90

-195

-180165150

135

120

105

90

75

60

45

3015

-165-150

-30

-20

-10

0

-40

-135

-120

-90

-75

-60

-45

-30-150

-105

4.900 GHz - 5.875 GHz

5.0 dBi

AP-ANT-93

High gain 3 x 3 MIMO directional

5.150 GHz - 5.875 GHz

14.0 dBiLinear dual-slant ç45 degrees

20 20 < 1.7 : 1 50 watts3 x N-type/f, connectors

305 x 305 x 15 -55º C to +65º C

Use N-type/m to N-type/m RF cable to connect antenna to AP (order separately)


8


ANTENNA MATRIX: OUTDOOR/INDOOR (N-TYPE)MODEL TYPE BAND(S) TYPICAL

GAINPOLARIZATION & ELEMENT TYPE

BANDWIDTH (DEGREES)




ANTENNA PATTERNS

H-PLANE E-PLANE

ANT-3x3-2005

Three omnidirectional antennas – two vertical and one horizontal – for use in 802.11ac and 802.11n MIMO meshlink and client access applications

2.400 GHz - 2.500 GHz

5.0 dBi max.

Vpol antenna:linear, vertical

Hpol antenna:linear, horizontal

360Vpol: 30

Hpol: 25

Vpol antenna:1. 7 : 1 min

Hpol antenna:2.0 : 1 min

Vpol: 50 watts

Hpol: 10 watts

N-type male (Note: RF cables not included)

Vpol antenna: 309 x 32 x 32

Hpol antenna: 329 x 45 x 45

-40º C to +70º C

0345330

315

300

285

270

255

240

225

210195

1530

-10

10

0 45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

10

0 45

60

90

105

120

135

150165180

75-30

-20

ANT-3x3-5005


4.900 GHz - 5.875 GHz

5.0 dBi max.



360Vpol: 29

Hpol: 33

2.0 : 1 min

10 wattsN-type male (Note: RF cables not included)

200 x 25 x 25 -40º C to +70º C

ANT-3x3-5010


4.900 GHz - 5.875 GHz

5.0 dBi max.



360Vpol: 8Hpol: 9.5

2.0 : 1 min

10 wattsN-type male (Note: RF cables not included)

Vpol:490 x 25 x 25

Hpol:451 x 25 x 25

-40º C to +70º C

0345330

315

300

285

270

255

240

225

210195

153010

0 45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

10

0 45

60

90

105

120

135

150165180

75-30

-10

-20

V polH pol

V polH pol

-30

-20

0

-40

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

0

-40

45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

45

60

90

105

120

135

150165180

75

10 10

-10

9


ANTENNA MATRIX: OUTDOOR/INDOOR (N-TYPE)MODEL TYPE BAND(S) TYPICAL


BANDWIDTH (DEGREES)




ANTENNA PATTERNS

H-PLANE E-PLANE

ANT-3x3-5712

Multipolarized antenna with70 degree horizontal and 25 degree vertical beamwidths

4.900 GHz - 6.000 GHz

11.5 dBimin

Pair: linear vertical and linear horizontal

70Vpol: 25Hpol: 25Slant: 25

< 2.0 : 1 6 wattsN-type female x 3 (RF cables not included)

190 x 190 x 30 -45° C to +65° C

ANT-2x2-2005

Direct mount omni, 2 x 2 MIMO pair

2.400 GHz - 2.500 GHz

5.0 dBiPair: linear vertical and linear horizontal

360Vpol: 30Hpol: 25

Vpol: <1.7

Hpol: <2.0

Vpol: 50 watts

Hpol: 10 watts

2x N-type/m, direct mount

Vpol: 309 x 32 x 32

Hpol: 329 x 45 x 45

-30º C to +70º C

0345330

315

300

285

270

255

240

225

210195

1530

-10

10

0 45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

10

0 45

60

90

105

120

135

150165180

75-30

-20

ANT-2x2-L214

Directional2.400 GHz - 2.500 GHz

14.0 dBiDual: linear vertical and linear horizontal

30 30 < 2.0 : 1 6 watts 2x N-type/f 260 x 261 x 30 -45° C to + 65° C

180165150

135

120

105

90

75

60

45

3015

-165-150

-10 -135

-120

-90

-75

-60

-45-30

-15015 -150

-105

-20

180165150

135

120

105

90

75

60

45

30

-165-150

-10 -135

-120

-90

-75

-60

-45-30

-105

-20

-30-30

180165150

135

120

105

90

75

60

45

30

-165-150

-10 -135

-120

-90

-75

-60

-45-30

15 -150

-105

-20

-30

180165150

135

120

105

90

75

60

45

30

-165-150

-10 -135

-120

-90

-75

-60

-45-30

15 -150

-105

-20

-30

180165150

135

120

105

90

75

60

45

30

-165-150

-10 -135

-120

-90

-75

-60

-45-30

15 -150

-105

-20

-30

180165150

135

120

105

90

75

60

45

30

-165-150

-10 -135

-120

-90

-75

-60

-45-30

15 -150

-105

-20

-30

180165150

135

120

105

90

75

60

45

30

-165-150

-10 -135

-120

-90

-75

-60

-45-30

15 -150

-105

-20

-30

180165150

135

120

105

90

75

60

45

30

-165-150

-10 -135

-120

-90

-75

-60

-45-30

15 -150

-105

-20

-30

10


ANTENNA LINE MATRIX: OUTDOOR/INDOOR (N-TYPE)MODEL TYPE BAND(S) TYPICAL


BANDWIDTH (DEGREES)




ANTENNA PATTERNS

H-PLANE E-PLANE

ANT-2x2-5005

Direct mountomni, 2 x 2MIMO pair

5.150 GHz - 5.875 GHz


360Vpol: 29Hpol: 33

<2.0 : 1 10 watts2 x N-type/m, direct mount

200 x 25 x 25 -30º C to +70º C

0345330

315

300

285

270

255

240

225

210195

153010

0 45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

10

0 45

60

90

105

120

135

150165180

75-30

-10

-20

V polH pol

V polH pol

ANT-2x2-L514

Directional4.900 GHz - 5.875 GHz

14.0 dBiDual: linear vertical and linear horizontal

30 30 <2.0 : 1 6 watts 2 x N-type/f 190 x 190 x 30 -45° C to +65° C

180165150

135

120

105

90

75

60

45

3015

-165-150

-10 -135

-120

-90

-75

-60

-45-30

-15015 -150

-105

-20

180165150

135

120

105

90

75

60

45

30

-165-150

-10 -135

-120

-90

-75

-60

-45-30

-105

-20

-30-30

ANT-2x2-5010

Direct mountomni, 2 x 2MIMO pair

5.150 GHz - 5.875 GHz


360Vpol: 8Hpol: 9.5

<2.0 : 1 10 watts2 x N-type/m,direct mount

Vpol:490 x 25 x 25

Hpol:451 x 25 x 25

-30º C to +70º C

0345330

315

300

285

270

255

240

225

210195

153010

0 45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

10

0 45

60

90

105

120

135

150165180

75-30

-10

-20

V polH pol

V polH pol

Use N-type/m to N-type/m RF cable to connect antenna to AP (order separately)

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view Alcatel-Lucent Enterprise trademarks visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent Enterprise assumes no responsibility for inaccuracies contained herein. Copyright © 2015 Alcatel-Lucent Enterprise. All Rights Reserved. 201502270002EN (March)




BANDWIDTH (DEGREES)




ANTENNA PATTERNS

H-PLANE E-PLANE

ANT-2X2-D805

120 Degree 2 x 2 MIMO sector

2.400 GHz - 2.500 GHz

5.0 dBi

Linear dual-slant±45 degrees

120 70 <1.8 : 1 20 watts2 x N-type/m,pigtail cable

200 x 200 x 33 -40º C to +70º C

907560

45

30

15

0

-15

-30

-45

-60-75

150120

-30

-20

-10

10

0

-40

135

150

180

-165

-150

-135

-120-105-90

165

907560

45

30

15

0

-15

-30

-45

-60-75

150120

-30

-20

-10

10

0

-40

135

150

180

-165

-150

-135

-120-105-90

165

907560

45

30

15

0

-15

-30

-45

-60-75

150120

-30

-20

-10

10

0

-40

135

150

180

-165

-150

-135

-120-105-90

165

907560

45

30

15

0

-15

-30

-45

-60-75

150120

-30

-20

-10

10

0

-40

135

150

180

-165

-150

-135

-120-105-90

165

5.150 GHz -5.875 GHz

5.0 dBi

ANT-2x2-2714

High gain 2x2 MIMO directional

2.400 GHz -2.483 GHz

14.0 dBiLinear dual-slant±45 degrees

70 23 <1.5 : 1 20 watts2 x N-type/f,connectors

306 x 306 x 25 -45º C to +70º C

0345330

315

300

285

270

255

240

225

210195

1530

-10

10

0 45

60

90

105

120

135

150165180

75

0345330

315

300

285

270

255

240

225

210195

1530

-30

-20

-10

10

0 45

60

90

105

120

135

150165180

75-30

-20

Element 2Element 1

Element 2Element 1



ALCATEL-LUCENT OmniAccess COMPACT ROUTERS ENTERPRISE SERVICES ROUTERS

Alcatel-Lucent OmniAccess® Compact Enterprise Services Routers can offer Metro Ethernet, leased line and LTE communication services in corporate offices, providing maximum reliability, security and intelligence for data and voice applications. Everything is seamlessly integrated with the current VPN service.

5720 ESR

5710 ESR

The OmniAccess 5710 Enterprise Services Routers (ESRs) and OmniAccess 5720 Enterprise Services Routers (ESRs) have multiple WAN options plus optional LTE connectivity. Either interface can be used as a main line, backup link or simultane-ous connection. The OmniAccess Compact ESRs also feature a four-port gigabit switch and an IEEE 802.11 a/b/g/n access point. In small and medium-sized branch offices, high connectivity is a key requirement. With the OmniAccess LTE backup, connectivity can be maintained even in the event of disruption of service with the WAN connection.

The rate at which Wireless WANs (WWANs) have evolved means that cellular communications can now be offered at speeds comparable to those provided by land lines. Those speeds, together with low transmission delay (link latency at around 10 ms in commercial LTE networks) and very high stability, satisfy even the most demanding corporate applications: voice and video streaming traffic and business-critical data applications.

Corporate management features are fully supported (SNMPv1/2/3 fully parameter-ized complying with MIB-2, FTP, TFTP, RADIUS and Syslog), simplifying seamless integration with the company’s existing communications management platform.

FEATURES• Enhanced corporate services

• WAN connectivity

• Advanced security features Integrated VoIP solution

• High-performance WAN

• High-performance WWAN

BENEFITS• Ensures optimal availability and

reliability

• Provides maximum security

• Delivers improved communication over cellular networks

2

Alcatel-Lucent OmniAccess Compact RoutersALCATEL-LUCENT ENTERPRISE DATA SHEET

Table 1 shows the detailed features of the OmniAccess Compact ESRs.

Table 1. OmniAccess Compact ESRs: Detailed features

FUNCTIONS FEATURES

Enhanced corporate services

• Border router for different dynamic routing domains (RIP, OSPF, BGP), administrative distance in IP routes, route filtering based on maps, and policy-based routing (PBR) enable convergent corporate services that combine WWAN and land-line access

• Multi-HSRP and multi-VRRP for network resilience and load balancing applications

• Link quality monitoring through the NSM/NSLA system; routing policy based on link quality (RTT, erroneous frame rate and UDP jitter)

• QoS application for flow priority, tagging and traffic classification means efficient use of the network resources and an accurate definition of the service level agreements (SLAs)

WAN connectivity • Independent Gigabit-Ethernet (GigE) 10/100/1000M port for connecting to WAN-Ethernet lines (requires a license)

• High processing capacity for maximum performance for Ethernet transmission

• Full VLAN support in the GigE port and Fast Ethernet ports (trunking, filtering and QinQ)

• Leased line support with E1/T1 and universal serial port (synchronous) (V.35, X.21, V.24)

• VDSL2/ADSL2+ WAN over POTS line (available only on the OmniAccess 5710 ESR)

Advanced security features

• Incorporated encryption processor optimizes device performance in scenarios with IPSec tunnels

• Fully parameterized IPSec client/server: Advanced IPSec features such as PKI encryption (digital certificates), extended authentication and Reverse-Route Injection (RRI) provide compatibility with other commercial VPN solutions

• Latest-generation meshed topology VPNs: Dynamic Multipoint VPN technology

• IP filtering, MAC filtering and the SPI firewall protect the router from DoS attacks

Integrated VoIP solution

• Call rerouting over the main VoIP link or through the GSM telephony line enabled in the router’s 4G interface

• Universal B2B-UA SIP server compatible with Unified Communications and with survival functionality residing in the router itself (does not require IP terminals with survival)

• IP switchboard features (IP-PABX): Ring groups, hunt groups, capture groups, double dialing, local message recording, and blind and attended transfers

High-performance WLAN

• Embedded WLAN module (IEEE 802.11 a/b/g/n) with double external antenna connector (2x2 MIMO); activated by license

• Configurable Access Point and Client operation modes, either to reroute from the Wi-Fi® terminals to the mobile network (access to Internet or to corporate VPN, depending on the service specifications, when operating in Access-Point mode) or to connect the router to the branch Wi-Fi network to access certain applications in the branch (when in Client mode)

High-performance WWAN

• 4G interface fully integrated in the router’s internetworking protocol architecture (CIT features), thereby providing high quality and efficient 4G/VPN services

• Three backup options for the main 4G service: Through the secondary SIM card, the external USB/4G modem or by connection to an alternative APN (double PDP context; optional)

• Improved 4G signal stability in areas with poor WWAN coverage: Up to three SMA ports for external 4G antennas (Rx diversity)

• Passive WWAN monitoring mechanisms (making it unnecessary to transmit polling traffic):

¬ Constant monitoring of signal coverage, connection to the mobile network and the IP connection

¬ Detailed monitoring of branch traffic over the WWAN link

¬ Minimize time communications service is unavailable

¬ Audio GSM calls supported simultaneously with 4G data transmission for emergency telephony services

3


OmniAccess 5710 and 5720 models

The standard OmniAccess 5710 and 5720 routers have four GigE switched ports and one GigE WAN port. The OmniAccess 5720 also has one slot that supports WAN modules (E1/T1, serial, GigE SFP). The OmniAccess 5710 has one VDSL2/ADSL2+ port. All OmniAccess Compact ESRs have WLAN capability, which can be activated by software license. The WWAN options include 4G-specific services for Verizon, AT&T and global 4G and 3G.

TECHNICAL SPECIFICATIONSDetailed product featuresEthernet switch

• 10/100/1000Base-T automatic detection

• Duplex/half duplex automatic negotiation

• MDI/MDI-X crossover detection

• Ethernet V2/IEEE 802.3

• LLC (IEEE 802.2), ARP

• IEEE 802.1Q (VLAN)

• IEEE 802.1X

• Managed switch:

¬ EtherLike-MIB (RFC 2665)

¬ SNMP-REPEATER-MIB (RFC 2108)

¬ MAU-MIB (RFC 2668)

• Two status LEDs per port

Synchronous serial interface

• V.35, X.21 or V.24 physical interfaces

• DTE or DCE mode

• Data rates from 64 kHz to 2 Mb/s

• Max MTU 1500 bytes

• HDLC, PPP and Frame Relay encapsulation

E1/T1 link

• Configurable as E1 or T1 operation

• Clear-channel

• Fractional

• HDLC, PPP and Frame Relay encapsulation

WLAN

• IEEE 802.11 a/b/g/n

• Two detachable external antennas (SMA ports)

Wireless-specific features

• Selectable transmission power

• Automatically selected speed

• IEEE 802.11i, WPA and WPA2

• EAP and EAPOL

• Authentication: Open, shared and WPA

• Encryption: AES, TKIP and WEP

• ESSID

• MAC filtering

• QoS: AIFS, CWmin and Cwmax

Embedded 4G

• Automatic handover

• Passive detection of WWAN failure based on monitoring IP traffic in progress

• Active detection of IP/WWAN service degradation based on IP traffic poll: Monitors delay, jitter and packet error rate

• Real-time monitoring of radio parameters

• Local storing of radio statistics for WWAN service evolution reports on console

• Automatic management of operating SIM tray with multiple selection criteria:

¬ Signal level

¬ WWAN technology available in cell: EGPRS or WCDMA

¬ Link quality: Availability, latency, jitter, error rate

¬ Based on time schedule

¬ Dual PDP context (optional)

• 4G firmware remote upgrading (FTP transfer)

IPv4 protocols and features• IP, ARP and Proxy ARP

• Static IP routing

• RIP I, RIP II, OSPFv2 and BGP-4

• Bidirectional Forwarding Detection (BFD)

• Compatible with HSRP

• RFC 2281 VRRP – Virtual Router Protocol

• Policy routing

• Multi-VRF

• Quality of backup: Routing based on network quality measurements

• Multi-path per IP packet (with static and dynamic routing)

• Weighted balancing per TCP/IP session

• Multicast: IGMP, IGMP-proxy and MOSPF

• DHCP client, server and relay

• NTP client

• DNS client and proxy

• DNS cache

• DNS dynamic updating (RFC 2136)

• DynDNS client

• NAT, PAT, port mapping and NAT exceptions

• PAT firewalling

• Multiple addresses per interface

• Loopback interfaces

Interfaces• 1 x 10/100/1000M interface GigE, RJ-45F

• 1 x 10/100/1000M interface GigE, SFP

• 1 x synchronous serial: V.35, X.21 or V.24

• 1 x E1/T1 (fractional)

• 4 x 10/100/1000M GigE switch, RJ-45F

• 1x WLAN interface: IEEE 802.11 a/b/g/n with two external antenna ports (optional)

• 1 x embedded interface

¬ LTE

¬ HSPA+

¬ HSPA

¬ UMTS

¬ EDGE

¬ GPRS

• Double connector for external 4G antenna (SMA connectors)

• 1 x USB Host 2.0 interface

• 1 x console port, RJ-45F

Security and VPNs• IPSec client and server. Fully

parameterized, compatible with third-party IPSec peers

• IPSec security services: ESP and AH

• IPSec operation modes: Tunnel and transport

• Encryption: RC4, DES, 3DES and AES

• Authentication: SHA-1 and MD5

• IKE Protocol

• ISAKMP configuration methods: Oakley groups 1, 2, 5 and 15

• NAT-traversal

• RRI

• Digital certificates

¬ X.509v3

¬ LDAP

¬ PKIX

¬ PEM

¬ DER

• SCEP Protocol

• TED Protocol

• IPSec PMTU discovery

• GRE and multi-GRE encryption (GRE RC4)

• NHRP Protocol

• Dynamic Multipoint IPSec VPNs (DMVPN)

• Gateway Encryption Transport VPN (GET VPN - GDOI) (RFC 3547)

• RADIUS Access Control (RFC 2138)

• L2TP client (LAC), L2TP initiation and L2TP server (LNS)

• L2TP/IPSec server compatible with Microsoft clients

• Advanced IP filters

• Advanced Firewall System (AFS)

• Stateful firewall

• Advanced packet classification and marking

• URL and content filtering

4


QoS• Packet tagging (DiffServ) based on the

interface, subinterface, protocol, port, MAC and size

• Congestion control:

¬ First In First Out (FIFO)

¬ Queue priorities

¬ BRS proprietary system

¬ WFQ

• Low Latency Queuing (LLQ)

• Traffic shaping

¬ Proprietary (over BRS)

¬ ATM traffic shaping

¬ Frame Relay traffic shaping

• Fragmentation in Frame Relay (FRF.12), PPP and MPPP

PPP and PPPoE• PPP (RFC 1661), PAP/CHAP and IPCP

• Multilink PPP

• Multi-class extension

• Multilink PPP (RFC 2686)

• PPPoE, PPPoE bridge + routing (PPPoE pass-through)

• Multilink PPP over PPPoE

• Renegotiation based on PADT

Bridging• Bridge over PPP (BCP)

• Spanning Tree Protocol (STP) (IEEE 802.1d)

• Rapid Spanning Tree Protocol (RSTP) (IEEE 802.1w)

• Multiple bridge domains

• Simultaneous bridging and routing

• IEEE 802.1p Class of Service (CoS)

• Per VLAN Spanning Tree Protocol (PVST)

• Source routing, MAC filtering and NetBIOS

Data compression• X.25 and PPP compression

• IPHC compression

• Van Jacobson and STA LZS compression algorithms

Management

• Command line interface (CLI) on console, Telnet and Secure Shell (SSH)

• SNMP: MIB-2, Private-MIB

• Events logging system

• Netflow V5 and V9

• Syslog client

• NTP

• DynDNS client

• FTP and TFTP software, BIOS and configuration upgrading

• Internal protocol analyzer compatible with WireShark®

• Default configuration reset knob

• RADIUS accounting (RFC 2139)

OMNIACCESS 5720 ESR-SPECIFIC FEATURES

• Four integrated switched 10/100/ 1000-Mb ports

• One integrated WAN 10/100/ 1000-Mb port

• Wi-Fi option

• LTE option

• One multipurpose slot

• One console

• Dimensions

¬ Height: 4.5 cm (1.77 in.)

¬ Width: 24.5 cm (9.64 in.)

¬ Depth: 21 cm (8.26 in.)

¬ Weight 1.4 Kg (3.08 lb)

• Environmental specifications

¬ Operating temperature: 0 °C to 45 °C (32 °F to 113 °F)

¬ Storage temperature: 10 °C to 70 °C (14 °F to 158 °F)

¬ Humidity (operating): 5% to 80% non-condensing

¬ Humidity (storage): 5% to 90% non-condensing

¬ Power Consumption: 13 Watts

OMNIACCESS 5710 ESR-SPECIFIC FEATURES

• Four integrated switched 10/100/ 1000-Mb ports

• One integrated WAN 10/100/ 1000-Mb port

• Wi-Fi option

• LTE option

• One VDSL2/ADSL2+ port

• One console

• Dimensions

¬ Height: 4.8 cm (1.88 in.)

¬ Width: 24.2 cm (9.52 in.)

¬ Depth: 17.9 cm (7.04 in.)

¬ Weight .8 Kg (1.76 lb)

• Environmental specifications

¬ Operating temperature: 0 °C to 45 °C (32 °F to 113 °F)

¬ Storage temperature: 10 °C to 70 °C (14 °F to 158 °F)

¬ Humidity (operating): 5% to 80% non-condensing

¬ Humidity (storage): 5% to 90% non-condensing

¬ Power Consumption: 11 Watts

WAN expansion modules• One E1/T1 port

• One GigE SFP port

• One serial port

Table 2. OmniAccess Compact ESRs: Ordering information

OA5710V-xx OA5710V ESR base model has 1xVDSL2/ADSL2+/ADSL2 WAN over POTS, VDSL2 profile 17a, 4 x GigE LAN ports and 1 x GigE WAN port; hardware-ready for 802.11 a/b/g/n (activated by license); see software licenses available; see part number suffix for power cord plug type

OA5710V-IS OA5710V ESR base model has 1xVDSL2/ADSL2+/ADSL2 WAN over POTS, VDSL2 profile 17a, 4 x GigE LAN ports and 1 x GigE WAN port.; hardware-ready for 802.11b/g/n (activated by license). Wi-Fi Restricted Regulatory Domain - Israel. Software license required for activation; see Software License Section for details. Includes Israel Power Cord.

OA5710V-4A-US OA5710V ESR with 4G/LTE and other features for North America (LTE AWS and B17 MIMO, fallback to HSPA+/UMTS 50/AWS/1900/2100 MHz and GPRS); see base model for ports; hardware-ready for 802.11a/b/g/n (activated by license); see software licenses available; see part number suffix for power cord plug type

OA5710V-4V-US OA5710V ESR with 4G/LTE for Verizon (LTE B13 MIMO, fallback to CDMA 850/1900 MHz and HSPA+/UMTS 850/900/1900/2100 MHz and GPRS); see base model for ports; hardware-ready for 802.11a/b/g/n (activated by license); see software licenses available; see part number suffix for power cord plug type

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. (October 2015)

Table 2. OmniAccess Compact ESRs: Ordering information

OA5710V-4G-xx OA5710V ESR with 4G/LTE for global usage (LTE at 800/900/1800/2100/2600 MHz, fallback to HSPA+/UMTS 900/2100 MHz and EDGE/GPRS 900/1800/1900 MHz); see base model for ports; hardware-ready for 802.11a/b/g/n (activated by license); see software licenses available; see part number suffix for power cord plug type

OA5710V-4G-IS OA5710V ESR with 4G/LTE for global usage (LTE at 800/900/1800/2100/2600 MHz, fallback to HSPA+/UMTS 900/2100 MHz and EDGE/GPRS 900/1800/1900 MHz;see base model for ports; hardware-ready for 802.11b/g/n (activated by license). Wi-Fi Restricted Regulatory Domain - Israel. Software license required for activation; see Software License Section for details. Includes Israel Power Cord.

OA5710V-H+-xx OA5710V ESR with 3.7G for global usage (HSPA+ at 850/900/1900/2100 MHz, fallback to EDGE/GPRS 850/900/1800/1900 MHz); see base model for ports; hardware- ready for 802.11a/b/g/n (activated by license); see software licenses available; see part number suffix for power cord plug type

OA5710V-H+-IS OA5710V ESR with 3.7G for global usage (HSPA+ at 850/900/1900/2100 MHz, fallback to EDGE/GPRS 850/900/1800/1900 MHz). See base model for ports; hardware-ready for 802.11b/g/n (activated by license). Wi-Fi Restricted Regulatory Domain - Israel. Software license required for activation; see Software License Section for details. Includes Israel Power Cord.

OA5720-xx OA5720 ESR base model has 1 x GigE WAN port, 4 x GigE LAN ports and 1 x MIC slot; hardware- ready for 802.11a/b/g/n (activated by license); see software licenses available; see part number suffix for power cord plug type

OA5720-IS OA5720 ESR base model has 1 x GigE WAN port, 4 x GigE LAN ports and 1 x MIC slot; hardware-ready for 802.11b/g/n (activated by license). Wi-Fi Restricted Regulatory Domain - Israel. Software license required for activation; see Software License Section for details. Includes Israel Power Cord.

OA5720-4A-US OA5720 ESR with 4G/LTE and other features for North America (LTE AWS and B17 MIMO, fallback to HSPA+/UMTS 850/AWS/1900/2100 MHz and GPRS); see base model for ports; hardware-ready for 802.11a/b/g/n (activated by license); see software licenses available; see part number suffix for power cord plug type

OA5720-4V-US OA5720 ESR with 4G/LTE for Verizon (LTE B13 MIMO, fallback to CDMA 850/1900 MHz and HSPA+/UMTS 850/900/1900/2100 MHz and GPRS); see base model for ports; hardware-ready for 802.11a/b/g/n (activated by license); see software licenses available; see part number suffix for power cord plug type

OA5720-4G-xx OA5720 ESR with 4G/LTE for global usage (LTE at 800/900/1800/2100/2600 MHz, fallback to HSPA+/UMTS 900/2100 MHz and EDGE/GPRS 900/1800/1900 MHz);see base model for ports; hardware-ready for 802.11a/b/g/n (activated by license); see software licenses available; see part number suffix for power cord plug type

OA5720-4G-IS OA5720 ESR with 4G/LTE for global usage (LTE at 800/900/1800/2100/2600 MHz, fallback to HSPA+/UMTS 900/2100 MHz and EDGE/GPRS 900/1800/1900 MHz). See base model for ports; hardware ready for 802.11b/g/n (activated by license). Wi-Fi Restricted Regulatory Domain - Israel. Software license required for activation; see Software License Section for details. Includes Israel Power Cord.

OA5720-H+-xx OA5720 ESR with 3.7G for global usage (HSPA+ at 850/900/1900/2100 MHz, fallback to EDGE/GPRS 850/900/1800/1900 MHz); see base model for ports; hardware- ready for 802.11a/b/g/n (activated by license); see software licenses available; see part number suffix for power cord plug type

OA5720-H+-IS OA5720 ESR with 3.7G for global usage (HSPA+ at 850/900/1900/2100 MHz, fallback to EDGE/GPRS 850/900/1800/1900 MHz). See base model for ports; hardware ready for 802.11b/g/n (activated by license). Wi-Fi Restricted Regulatory Domain - Israel. Software license required for activation; see Software License Section for details. Includes Israel Power Cord.

MODULES

ESR-MIC-1E1T1 1-port E1/T1 mini interface card for OA5720 ESR compact router

ESR-MIC-1SFP 1-port GigE SFP mini interface card for OA5720 ESR compact router

ESR-MIC-1SS 1-port Sync Serial mini interface card for OA5720 ESR compact router

SOFTWARE

OA5710-WLAN-SL WLAN 802.11a/b/g/n AP activation license for OA5710 ESR (all models)

OA5710-ADSV-SL Advanced IP Services activation license for OA5710 ESR (all models)

OA5720-WLAN-SL WLAN 802.11a/b/g/n AP activation license for OA5720 ESR compact router

Warranty Standard hardware warranty



ALCATEL-LUCENT OMNIACCESS 5800ENTERPRISE SERVICES ROUTERS

The Alcatel-Lucent OmniAccess® 5800 Enterprise Services Router (ESR) series bring together network transport and business applications into the same dual core hardware platform. They combine a high-performance router with a standards-based, secure applications server.

For operating offices and branches, connectivity to the network is essential. Given that many applications and data are “in the cloud,” the router is vital for day-to-day operations. It allows for critical business applications to reside on the same device facilitating a single point of man-agement for communications and application delivery in each office.

The OmniAccess 5800 ESR can simultane-ously operate as a router and server with its powerful internal dual core architecture. It can provide a server for files, printers, or scanners; IP telephony; energy manage-ment; an LDAP backup server; document management — just to name a few generic examples. Additionally, as it is based on accepted international standards, any application based on the Linux® operating system can be easily and quickly migrated, making the OmniAccess 5800 series an integrated solution that reduces dedicated server maintenance costs. The OmniAccess 5800 ESR is also a professional router with advanced features and routing capacity over 100 Mb/s. It has a full operating system in addition to LAN and WAN connectivity capabilities.

FEATURES• The OmniAccess 5800 provides advanced

hardware architecture with a double core processor and two different operating systems: the ESR operating system and a GNU/Linux Debian operating system. Both systems run in parallel, one in each core, as if they were two processors in two different machines, without compromising either performance or stability.

• The powerful processor allows the OmniAccess 5800 ESR to exceed 100 Mb/s routing bidirectional sustained flow throughput under normal operating conditions (IMIX traffic with active services). Supports routing protocols RIP I, RIP II, OSPFv2 and BGP-4 Bidirectional Forwarding Detection (BFD) and is compatible with HSRP.

• Security, incorporating firewall features (Stateful firewall) and IPSec.

• IP Telephony with Media Gateway features and IP Telephony integrated server capable of managing up to 300 telephones with SIP, H.323, Universal Alcatel – New Office Environment (UA-NOE) or SCCP (Skinny) protocols.

• Quality of Service, with CBWFQ, LLQ and WRED algorithms. Supporting a hierarchical system with 32 different traffic classes per interface, traffic marking and profiling as well as traffic pre-classification. Integrated with VPN, MPPP & fragmentation facilities.

2

Alcatel-Lucent OmniAccess 5800ALCATEL-LUCENT ENTERPRISE DATA SHEET

• Server platform supports a standard GNU/Linux Debian OS over which any application can be executed. Communications with the applications server are carried out through a virtual driver connected with the router so behavior from the applications is exactly the same as a typical server with an Ethernet card.

• Security for the branch office utilizing antivirus, antispam, content filtering and IDS functionality.

• WAN optimization achieved through video proxy, web cache and NAS with cloud backup.

• Voice tools including IP Call detection and voice recording.

• OmniAccess 5800 possesses unequalled versatility as a communications device. Capable of expanding to almost any configuration needed in a branch office to include a whole spectrum of Ethernet, WAN, Wi-Fi and voice interfaces.

BENEFITS• Versatility of being both a router and an

applications server

• Routing software oriented toward enterprises

• Advanced capabilities above and beyond standard routing

• Applications server platform

• Integrated applications for the enterprise

• Modularity and flexibility

DETAILED PRODUCT FEATURES Gigabit Ethernet interfaces

• 2 x 10/100/1000 Ethernet, RJ-45

• Electric interface compliant with 10/100/1000Base-T IEEE 802.3

¬ IEEE 802.3 ah (Ethernet OAM)

¬ Operational up to 180 meters with category 5 cable

¬ Automatic crossed detection MDI/MDIX for all operating modes

¬ Auto-negotiation complying with IEEE 802.3u

• IEEE 802.1Q (VLAN)

• IEEE 802.1X

• 2 status LEDs per port

Fast-Ethernet Switch • 8 x 10/100 Ethernet, RJ-45

• 10/100Base-T detection

• Automatic semi-duplex/duplex negotiation

• MDI/MDI-X detection (crossover detection)

• Ethernet V2/IEEE 802.3

• LLC (IEEE 802.2), ARP

• IEEE 802.1Q (VLAN) up to 16 VLANs

• Managed switch:

• EtherLike-MIB (RFC 2665)

• SNMP-REPEATER-MIB (RFC 2108)

• MAU-MIB (RFC 2668)

• 2 status LEDs and activity per port

WLAN-specific features• IEEE 802.11 a/b/g/n modes

• Manual or automatic channel selection

• Selectable power transmission

• Manual or automatic speed selection

• IEEE 802.11i, WPA, WPA2

• EAP, EAPOL

• Authentication (open, shared, WPA)

• Encryption (AES, TKIP, WEP)

• ESSID

• MAC filtering

• Quality of Service (QoS) AIFS, CWmin, CWmax

USB interface• USB 2.0 host interface

• Cellular features:

• Passive interface down detection (analysis of received traffic)

• Active interface down detection (poll)

• Automatic handover

Console• TIA/EIA-232 at 9600 b/s

(max. 115,200 b/s)

• 8 bits without parity and one stop bit (8N1)

Protocols and functionalitiesIPv4

• IP, ARP, Proxy ARP

• Static IP Routing

• RIP I, RIP II, OSPFv2 and BGP-4


• Compatible with HSRP

• RFC 2281 Virtual Router Redundancy Protocol (VRRP)

• Policy routing

• Multi-VRF

• Quality of backup: Routing based on network quality measurements

• Multi-path per IP packet (with static and dynamic routing)

• Weighted balancing per TCP/IP session

• Multicast: IGMP, IGMP-proxy, MOSPF

• DHCP client, server and relay

• NTP Client

• DNS client and proxy

• DNS cache

• DNS dynamic updating (RFC 2136)

• DynDNS Client

• NAT/PAT/Port Mapping/NAT exceptions

• PAT firewalling

• Multiple addresses per interface

• Loopback interfaces

IPv6

• IPv6 Core/Routing

• Dual Stack IPv4/IPv6 (DS-Lite)

• Address autoconfiguration

• Multicast MLD/MLDv2

• IPv4 to IPv6 transition mechanisms (RFC 4213)

• IPv6 over IPv4/IPv4 over IPv6 tunnels

• ACLs and firewall

• IPv6 ,management (CLI, Telnet, FTP, ping, traceroute, etc.)

PPP

• PPP (RFC 1661), PAP/CHAP, IPCP

• Dynamic assignment of IP addresses (own or peer)

• PPP Multilink

• Multi-Class Extension to Multi-Link PPP (RFC 2686)

PPPoE

• PPPoE over Ethernet and over ATM

• PPPoE Bridge + routing (PPPoE pass-through)

• PPP Multilink over PPPoE

• Re-negotiation based on PADT

ATM

• SAR AAL5

• PVCs: 31 and SVCs

• VPIs and VCIs range: Complete

• Dynamic creation and destruction of PVCs

• Traffic Shaping: CBR, UBR, VBR-nrt, VBR-rt

• OAM F4/F5

Encapsulation over ATM

• Routed IP RFC 1483 LLC and VC-based

• PPPoA RFC 2364 LLC and VC-based

• PPPoE RFC 2516 LLC and VC-based

• Classical IP over ATM (RFC 2225)

• Ethernet Bridged RFC 1483 LLC and VC-based

• Frame Relay over ATM: FRF.5 and FRF.8

Quality of Service (QoS)

• Packet labeling (DiffServ) depending on interface, subinterface, protocol, port, MAC and size

3


• Congestion control: FIFO, queuing priority, BRS proprietary system, WFQ

• Traffic limiting in queues, with overflow in lesser priority queues. Standard limitation over ATM and Frame Relay

• Fragmentation in FR (FRF.12) PPP and MPPP

Security and VPNs

• IPSec client and server, compatible with third-party IPSec peers

• IPSec security services: ESP and AH

• IPSec operation modes: tunnel and transport

• Encryption: RC4, DES, 3DES and AES

• Authentication: SHA-1 and MD5

• IKE Protocol

• ISAKMP Configuration Methods. Oakley groups 1, 2, 5 and 15

• NAT-Traversal

• Reverse Route Injection (RRI)

• X.509v3, LDAP and PKIX digital certificates

• SCEP Protocol

• Tunnel End-point Discovery (TED) Protocol

• IPSec PMTU Discovery

• GRE and multi-GRE. GRE RC4 encryption

• Next Hop Resolution Protocol (NHRP)

• Dynamic Multipoint IPSec VPNs (DMIVPN)

• Gateway Encryption Transport VPN (RFC 3547)

• RADIUS Access Control (RFC 2138)

• L2TP client (LAC), L2TP initiation and L2TP Server (LNS)

• L2TP/IPSec Server, compatible with Microsoft clients

• Telnet, SSH and FTP console access user and password protected

• User and permission levels

• Advanced IP filters

• Firewall functions

¬ Static and dynamic access controls (Stateful Packet Inspection)

¬ Intrusion detection and DoS

Data compression

• Compression in X.25 and PPP

• IPHC Compression

• Van Jacobson and STA LZS compression

IBM-SNA support

• SDLC-QLLC-LLC2 Conversions

• SNA over IP

• DLSw (RFC 1795) and remote IP Bridge (tunnel)

• SNA over Frame Relay (RFC 1490)

• BAN and remote Bridge Frame Relay

• SNA over X.25 (X.25-QLLCB)

Bridging

• Bridge over PPP (BCP), HDLC, Frame Relay with GRE

• Spanning Tree Protocol (STP) (IEEE 802.1d)

• Rapid Spanning Tree Protocol (RSTP) (IEEE 802.1w)

• Multiple bridge domains

• Simultaneous bridging and routing

• Class of Service (CoS) (IEEE 802.1p)

• Per VLAN Spanning Tree Protocol (PVST)

• Source Routing, MAC filtering and NetBIOS

Telephony over IP (ToIP)

• Signaling

• SIP: RFC 3261, RFC 3262, RFC 3264, RFC 3265

• SIP transport over UDP, TCP and TLS

• X.509 authentication over TLS

• SIP SDP: RFC 2327

• SIP SDES: RFC 4568

• H.323, H.245, H.225

• RAS

• UA-NOE (server function)

• SCCP (skinny) (server function)

• SIP and H.323 modified AASTRA (server function)

• Simultaneous telephone survival for SIP/H.323/SCCP/UA-NOE/SIP (AASTRA)/ H.323(ASTRA) terminals

• Encryption

• G.711 (A-law and mu law)

• G.729 (a and b)

• G.723.1 (5.3 kb and 6.4 kb)

• T.38

PBX features

• Attended and blind transfers

• Multiple terminal simultaneous ringing

• Hunt group

• Call groups

• Overflow

• Call forwarding if busy, no answer or unconditional

• Music on hold, streaming mode from file

• Configurable microphone, loud speakers, echo and tone levels

• RTP, RTCP, SRTP

• Data fragmentation FRF.12

• Header compression CRTP

• Silence suppression (VAD)

• Various voice packets per data frame

• CODED classes per destination

• Direct dialing

• Numerical expansion and compression

X.25 Switch

• Programmable routing

• X.25 call parameter modification

• X.25 over TCP/IP: XOT (RFC 1613)

Management

• Command line interface (CLI) on console, Telnet and Secure Shell (SSH)

• Access/execution user levels (local authentication or RADIUS)

• SNMPv3: MIB-2, Private MIB by Alcatel-Lucent Enterprise

• Event Logging System

• Network/link quality guarantee agent (feature similar to SAA)

• Netflow V5 and V9

• Syslog Client

• NTP Protocol

• DynDNS Client

• FTP and TFTP software, BIOS and configuration updating

• Integrated protocol analyzer compatible with Ethereal/Wireshark

• Default configuration switch

• Partial support of Cisco Discovery Protocol (CDP)

• RADIUS Accounting (RFC 2139)

• To be integrated in Alcatel-Lucent OmniVista® 2500 Network Management System 3.5.6

4


TECHNICAL SPECIFICATIONSTable 1. Product matrix

PRODUCT MATRIX OA 5840 OA 5850

Integrated GigE ports 2 2

Wi-Fi option Yes Yes

DSL-specific slot 1 1

Multipurpose Voice/Data slots 1 2

Hard disk option No Yes (250 GB)

Processor Dual Core 800 MHz Dual Core 800 MHz

Flash 64 MB 64 MB

RAM 512 MB 512 MB

Console 1 1

Power consumption** 40 W 45 W

Heat dissipation 618 BTU/h 825 BTU/h

Width 44 cm (17.32 in) 44 cm (17.32 in)

Depth 37.8 cm (13.70 in) 37.8 cm (13.70 in)

Height 4.3 cm (1.85 in) 4.3 cm (1.85 in)

Approximate weight 4.5 kg (9.92 lb) 4.5 kg (9.92 lb)

Operating temperature 5°C to 45°C (32°F to 113°F) 5°C to 45°C (32°F to 113°F)

Storage temperature –10°C to 70°C (14°F to 158°F) –10°C to 70°C (14°F to 158°F)

Humidity (operating) 5% to 90% non-condensing 5% to 90% non-condensing

Humidity (storage) 5% to 90% non-condensing 5% to 90% non-condensing

** Maximum power consumption under full traffic load

Table 2. Expansion Module Matrix

WAN/DATA/VOICE MODULES OA 5840 OA 5850

*VDSL2 Yes Yes

*ADSL2 Yes Yes

G.SHDSL (2-port) Yes Yes

Serial Yes Yes

2 BRI (Data) Yes Yes

1 E1/T1 Yes Yes

2 BRI (Voice) Yes Yes

1 port SFP Yes Yes

4 FXS/FXO Yes Yes

2 E&M Yes Yes

**4 E1/T1 No Yes

**3-port serial No Yes

**2-port SFP No Yes

* DSL modules only operate on the DSL slot** High-density modules only operate with the OmniAccess 5850

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. (May 2015)

Table 3. OmniAccess 5800 ordering information

PRODUCT FEATURE

OA5840-xx OA5840 ESR modular chassis base model has 2 x GigE WAN, 8 x GigE LAN, 1 x DSL slot, 1 x AIC slot. HW ready for 802.11bgn (activated by license). See SW licenses available. See part number suffix for power cord plug type.*

OA5850-xx OA5850 ESR modular chassis base model has 2 x GigE WAN, 8 x GigE LAN, 1 DSL slot, 2 x AIC slots. HW ready for 802.11bgn (act by license). See SW licenses available. See part number suffix for power cord plug type.*

OA5850D-xx OA5850 ESR modular chassis with 250 GB HD memory storage for applications. See base model for ports. HW ready for 802.11bgn (act by license). See SW licenses available. See part number suffix for power cord plug type.*

MODULES

ESR-DSL-ADSL ADSL2+/ADLS2 card for OA ESR modular routers

ESR-DSL-VDSL VDSL2/VDSL card for OA ESR modular routers

ESR-AIC-2SHDSL G.SHDSL 2-pair card for OA ESR modular routers

ESR-AIC-3SS 3-port Sync Serial card for OA ESR modular routers

ESR-AIC-1E1T1 1-port E1/T1 card for OA ESR modular routers

ESR-AIC-4FXSFXO 4-port FXS/FXO card for OA ESR modular routers includes DSPs

ESR-AIC-2BRI 2-port BRI card for OA ESR modular routers includes DSPs

ESR-AIC-1PRI 1-port PRI card for OA ESR modular routers includes DSPs.

ESR-AIC-2EM 2-port E&M card for OA ESR modular routers, includes DSPs

ESR-AIC-1SS 1-port Sync Serial card for OA ESR modular routers

ESR-AIC-2SFP 2-port GigE SFP card for OA ESR modular routers. Supported on OA5850 ESR

ESR-AIC-4E1T1 4-port E1/T1 card for OA ESR modular routers

ESR-AIC-2B-ST 2-port ISDN BRI-S/T data only card for OA ESR modular routers

ESR-AIC-2AM 2-port Analog modem for OA ESR modular routers

SOFTWARE

OA5840-WLAN-SL WLAN 802.11bgn AP activation license for OmniAccess 5840 ESR

OA5840-TOIP-SL Telephony services activation license for OmniAccess 5840 ESR

OA5840-SEC-SL Security services activation license for OmniAccess 5840 ESR

OA5840-SNA-SL Data services activation license for OmniAccess 5840 ESR

OA5850-WLAN-SL WLAN 802.11bgn AP activation license for OmniAccess 5850 ESR

OA5850-TOIP-SL Telephony services activation license for OmniAccess 5850 ESR

OA5850-SEC-SL Security services activation license for OmniAccess 5850 ESR

OA5850-SNA-SL Data services activation license for OmniAccess 5850 ESR

APPLICATIONS

OA5850-AV-SL Antivirus application license for OmniAccess 5850 ESR

OA5850-FS-SL File Server application license for OmniAccess 5850 ESR

OA5850-IDS-SL IDS application license for OmniAccess 5850 ESR

OA5850-NT-SL NTOP application license for OmniAccess 5850 ESR

OA5850-VP-SL Video Proxy application license for OmniAccess 5850 ESR

OA5850-WC-SL Web Cache application license for OmniAccess 5850 ESR

*Note rack mount kit not included. Please refer to accessories section of World Wide Price List.

Warranty Standard Hardware warranty

ALCATEL-LUCENT OMNISWITCH 10K

MODULAR LAN CHASSISThe Alcatel-Lucent OmniSwitch® 10K Modular LAN Chassis platform is a high-capacity, high-performance modular Ethernet LAN switch that is field-proven in enterprise, service provider and data center environments. Based on the Alcatel-Lucent Operating System (AOS), which is a state-of-the-art programmable and scriptable OS designed for Software-defined Networking (SDN) deployment, the OmniSwitch 10K delivers uninterrupted network uptime with non-stop Layer 2/3 forwarding and service software upgrades. Deep packet buffers, a lossless virtual output queuing (VOQ) fabric, ready for data center convergence with key data center bridging (DCB) and T11 BB-5 integration, and extensive traffic management capabilities improve application performance and user experience. Its scalability and Layer 2/3 fabric throughput meet your bandwidth requirements for today and tomorrow.

Layer 2/3 network deployments are simplified and the network has better performance and resiliency because of the OmniSwitch 10K hardware architecture and its virtual chassis technology. The OmniSwitch 10K implementation offers Virtual Extensible LAN (VXLAN) snooping, OpenFlow, Shortest Path Bridging (SPB), DCB capabilities, Quality of Service (QoS), and Layer 2/3 switching suitable for dynamic network provisioning as well as traffic monitoring and control. It also offers user and server access automation through Edge Virtual Bridging VEPA (IEEE802.1Qbg EVB) and use of

dynamic Virtual Network Profiles (vNP). Network virtualization for simplified, fully automated data center and cloud deployments is enabled over SPB (IEEE 802.1aq SPB-M) or Multiple VLAN Registration Protocol (MVRP) backbones.

The OmniSwitch 10K switch is a perfect fit for data center applications and serves as a long-term upgrade to any network because of its class-leading low-power consumption, front-to-back cooling, compact form factor, and front-accessible components.

FEATURES BENEFITS

• High-density, non-blocking 10/40 GigE ports with large packet buffers. Includes high-density 10/100/1000 Mbit/s ports

• Maximum network performance delivers quality bandwidth for improved application and user experience. Reduces network layers as well as investment and operation costs.

Virtualized management, control and programmability• Unified virtual chassis• Comprehensive northbound RESTful API to

the entire AOS feature set. The API offers access to all AOS command line interface (CLI) commands and all management information base (MIB) structures.

• AOS embedded scripting capabilities supporting Python and Bash programming allows workflow optimization.

• Hardware-based virtual routing and forwarding (VRF) support with VRF-lite and IPVPN capabilities.

• The OmniSwitch virtual chassis increases system redundancy and resiliency providing maximum uptime and high availability in the network.

• Optimizes and simplifies Layer 2/3 network designs and reduces administration overhead while increasing network capacity with resilient multipath active-active dual homing multi-chassis support.

• The RESTful interface exposes the entire AOS feature set as a programmable data structure. The API allows external controllers and applications to control and manage the switch’s data plane and monitor its counters, statistics and events for automation of the network.

• Provides interoperability, investment protection and flexibility.

2

Alcatel-Lucent OmniSwitch 10KALCATEL-LUCENT ENTERPRISE DATA SHEET

FEATURES BENEFITS

• Scalable network virtualization architecture with guaranteed service-level agreement (SLA) delivery over standard Ethernet fabric: auto-fabric IP routing for routed backbone and access provisioning, SPB for bridging and routed services, Edge Virtual Bridging (EVB), Multiple VLAN Registration Protocol (MVRP) and dynamic Virtual Network Profiles (vNP).

• Zero-touch provisioning and network automation with out-of-the-box plug-and-play auto-fabric for automatic protocol and topology discovery. Protocol auto-discovery and self-provisioning works with any Ethernet device that supports standard IEEE protocols, such as 802.1aq (SPBM), 802.1ak (MVRP) and 802.3ad/802.1AX (LACP), and standard IP routing protocols.

• Out-of-the-box flexible fabric architecture designed to automate and simplify the end-to-end deployment of campus, data center and cloud-based services.

• Prevents human mistakes by automating standardized and replicable configurations.• Prevents host address explosion and flooding with built-in SLA service support at low

capital and operating costs and based on interoperable proven standards. • Optimizes and simplifies Layer 2/3 network designs and reduces administration

overhead while increasing network capacity with resilient multipath active-active dual homing multi-chassis support.

• Out-of-the-box auto-fabric to simplify installation and service provisioning.• Automated Cloud Multi-Tenancy support over vNP. • The auto-fabric operation extends beyond Layer 2 auto-provisioning to IP routing

protocol provisioning and IP on-boarding.

• VXLAN snooping for dynamic real-time multi-tenant visibility and SLA policy enforcement.

• Integrated overlay (VXLAN) and underlay internet working automated with the OpenStack neutron plug-in

• Intelligent policy control through OpenFlow 1.3.1/1.0

• Embedded SDN integration to control virtual network profiles and policy management• Built-in dynamic and automated policy enforcement• Policy enforcement engine fully open for external control through RESTful

northbound APIs for automation and integration of innovative applications and Cloud Multi-Tenancy support

• VMware-certified Alcatel-Lucent OmniVista® 2500 Virtual Machine Manager (VMM), Virtual Network Profiles (vNP) integration, VM SLA monitoring and application fingerprinting for unmanned network operation and self-adjusting SLA for application delivery

• Interfaces with VMware vCenter® and Citrix™ XenServer® for discovery and inventory

• VMware Vcenter integration• Single pane-of-glass for end-to-end physical

and virtual networks infrastructure operations

• Real-time tracking between VM and its network location

• Dynamic VM performance for application performance analytics and visibility

• Unifies physical and virtual infrastructures providing network operators with a comprehensive end-to-end network view for VM inventory, VM performance, location tracking, event and log auditing and provisioning operations. Monitors applications and malware activity, adjusting the network to meet the application SLAs according to the business operational requirements. This enables error-free network administration operations and simplifies the deployment of new value-added services.

• Dynamic application profiling with in-line application recognition based on signatures and auto-adjustment of the network security and quality of service treatment. Maintains the VM performance measurement of latency, throughput and jitter in the data center.

• VM to underlay network correlation and single-pane visibility

• Multi-hop Fibre Channel over Ethernet (FCoE) transit switching based on T11-BB-5 with FCoE Initialization Protocol (FIP) snooping and flexible multi-queue IEEE DCB support: extends the lossless capability beyond FCoE to any traffic class in any CoS queue and for many queues simultaneously in the same port.

• Allows the administrator to have a hands-off operation using application-based dynamic Lossless configuration through Enhanced Transmission Selection (ETS) or manually engineered lossless tuned to the application needs.

• Reduces data center operating cost by simplifying the convergence of high performance storage I/O and mission critical data into a single multipath infrastructure.

3


DETAILED PRODUCT FEATURESSimplified manageability

• Fully programmable RESTful web services interface with XML and JSON support. The API enables access to CLI and individual MIB objects.

• Intuitive CLI in a scriptable Python and Bash environment through console, Telnet, or Secure Shell (SSH) v2 over IPv4/IPv6

• Powerful WebView Graphical Web Interface through HTTP and HTTPS over IPv4/IPv6

• Full configuration and reporting using SNMPv1/2/3 to facilitate third-party network management over IPv4/IPv6

• File upload using USB, TFTP, FTP, SFTP or SCP using IPv4/IPv6

• Multiple microcode image support with fallback recovery

• Local (on the flash) and remote server logging (Syslog) for event and command logging

• Loopback IP address support for management per service

• Management VRF support

• Policy- and port-based mirroring

• Remote port mirroring

• sFlow v5 and RMON

• Unidirectional Link Detection (UDLD) and Digital Diagnostic Monitoring (DDM)

• Dynamic Host Configuration Protocol (DHCP) relay

• IEEE 802.1AB LLDP with MED extensions

• Network Time Protocol (NTP)

• DHCPv4 and DHCPv6 server managed by Alcatel-Lucent VitalQIP® DNS/DHCP IP Address Management

Resiliency and high availability• Unified management, control and fabric-

mesh virtual chassis technology

• Virtual chassis 1+N redundant supervisor manager

• Virtual chassis In-Service Software Upgrade (ISSU)

• Smart continuous switching technology

• ITU-T G.8032/Y1344 2010: Ethernet Ring Protection

• IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), IEEE 802.1D Spanning Tree Protocol (STP) and IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

• Per-VLAN spanning tree (PVST+) and 1x1 STP mode

• IEEE 802.3ad/802.1AX Link Aggregation Control Protocol (LACP) and static LAG groups across modules

• Virtual Router Redundancy Protocol (VRRP) with tracking capabilities

• IEEE protocol auto-discovery


• Redundant and hot-swappable power supplies

• Redundant fans

• Hot-swappable fan tray

• Hot-swappable expansion modules

• Built-in CPU protection against malicious attacks

Data center networking • Dynamic Virtual Network Profiles (vNP)

• IEEE 802.1Qbg Edge Virtual Bridging (EVB)

• IEEE 802.1Qbb Priority Flow Control (PFC)

• IEEE 802.1Qaz Enhanced Transmission Selection (ETS)

• IEEE 802.1Qaz Data Center Bridging Capabilities Exchange Protocol (DCBX)

• IEEE 802.1 Converged Enhanced Ethernet (CEE) 1.01

• IEEE 802.1aq Shortest Path Bridging (SPB-M)

• IETF RFC 7348 Virtual Extensible LAN (VXLAN)

Software Defined Networking (SDN)

• Programmable AOS RESTful API

• Fully programmable OpenFlow 1.3.1 and 1.0 agent for control of native OpenFlow and hybrid ports

• OpenStack networking plug-in compatible with Grizzly or later

Converged storage I/O• Multi-hop FCoE transit switching with

FIP snooping

• End-to-end FCoE Converged Network Adapter (can) switching T11-BB-6

• FIP snooping

Advanced securityAccess control

• Autosensing IEEE 802.1X multi-client, multi-VLAN support, support for bridging and SPBM/VXLAN services

• MAC-based authentication for non-IEEE 802.1X hosts

• Secure Shell (SSH) with public key infrastructure (PKI) support

• Terminal Access Controller Access-Control System Plus (TACACS+) client

• Centralized Remote Access Dial-In User Service (RADIUS) and Lightweight Directory Access Protocol (LDAP) administrator authentication

• Centralized RADIUS for device authentication and network access control authorization

• Learned Port Security (LPS) or MAC address lockdown

• Access Control Lists (ACLs); flow-based filtering in hardware (Layer 1 to Layer 4)

• DHCP Snooping, DHCP IP and Address Resolution Protocol (ARP) spoof protection

• ARP poisoning detection

• IP Source Filtering as a protective and effective mechanism against ARP attacks

Quality of Service (QoS)• Priority queues: Eight hardware-based

queues per port

• Traffic prioritization: Flow-based QoS

• Flow-based traffic policing and bandwidth management

• 32-bit IPv4/128-bit IPv6 non-contiguous mask classification

• Egress traffic shaping

• Lossless Virtual Output Queuing (VOQ) with configurable scheduling algorithms

• DiffServ architecture

• Congestion avoidance: Support for end-to-end head-of-line (E2E-HOL) blocking prevention, IEEE 802.1Qbb Priority-based Flow Control (PFC) and IEEE 802.3x Flow Control (FC)

IPv4 routing• Multiple Virtual Routing and

Forwarding (VRF)

• Static routing with route labeling

• Routing Information Protocol (RIP) v1 and v2

• Open Shortest Path First (OSPF) v2 with Graceful Restart

• Intermediate System to Intermediate System (IS-IS) with Graceful Restart

• Border Gateway Protocol (BGP) v4 with Graceful Restart

• Generic Routing Encapsulation (GRE) and IP/IP tunneling

• Virtual Router Redundancy Protocol (VRRPv2)

• DHCP relay (including generic UDP relay)

• Address Resolution Protocol (ARP)

• Policy-based routing and server load balancing

• DHCPv4 server

• Distributed ARP learning

IPv6 routing• Multiple Virtual Routing and

Forwarding (VRF)

4


• Internet Control Message Protocol version 6 (ICMPv6)

• Static routing

• Routing Information Protocol Next Generation (RIPng)



• Multi-Topology IS-IS

• BGP v4 multiprotocol extensions for IPv6 routing (MP-BGP)

• Graceful Restart extensions for OSPF and BGP


• Neighbor Discovery Protocol (NDP)


• DHCPv6 server

IPv4/IPv6 multicast• Internet Group Management Protocol

(IGMP) v1/v2/v3 snooping

• Protocol Independent Multicast – Sparse-Mode (PIM-SM), Source Specific Multicast (PIM-SSM),

• Protocol Independent Multicast – Dense-Mode (PIM-DM), Bidirectional Protocol Independent Multicast (PIM-BiDir)

• Distance Vector Multicast Routing Protocol (DVMRP)

• Multicast Listener Discovery (MLD) v1/v2 snooping

• PIM to DVMRP gateway support

• (S,G) and (*,G) forwarding

Advanced Layer 2 services• Ethernet services support using IEEE

802.1ad Provider Bridges (also known as Q-in-Q or VLAN stacking)

• Fabric virtualization services IEEE802.1aq SPB-M and VXLAN

¬ Ethernet Virtual Connection (EVC) support for transparent LAN services, such as E-LAN, E-Line and E-Tree

¬ Multipoint Ethernet VPN (EVPN) over I-SID service virtualization or Q-in-Q tunnels or Visual Networking Index (VNI)

¬ Ethernet network-to-network interface (NNI) and user network interface (UNI)

¬ Service Access Point (SAP)

¬ Service VLAN (SVLAN) and Customer VLAN (CVLAN) support

¬ VLAN translation and mapping including CVLAN to SVLAN

¬ C-tag to S-tag priority mapping

• Port mapping

• DHCP Option 82: Configurable relay agent information

• Multicast VLAN Registration Protocol (MVRP)

• HA-VLAN for L2 clusters such as MS-NLB and active-active Firewall clusters

• Jumbo frame support

• Bridge Protocol Data Unit (BPDU) blocking

• STP Root Guard

TECHNICAL SPECIFICATIONSProduct specifications and measurements Per-port LEDs

• Ethernet/FC: link/activity

• EMP: link/activity

• Per-port multi-color beacon support in OS6900-Q32

System LEDs

• OK: green/yellow

• PS1: green/yellow


• PWR Save: green

COMPLIANCE AND CERTIFICATIONSEMI/EMC - Commercial

• FCC 47 CFR Part 15 Class A

• ICES-003 Class A

• CE marking for European

countries (Class A)

• EMC Directive 89/336/EEC

• EN55022:1998:2006 Class A

• EN55024 :1998:A1: 2001+A2:2003

• EN61000-3-2

• EN61000-3-3

• EN61000-4-2

• EN61000-4-3

• EN61000-4-4

• EN61000-4-5

• EN61000-4-6

• EN61000-4-8

• EN61000-4-11

• CISPR22:1997 Class A

• VCCI (Class A)

• AS/NZS 3548 (Class A)

• IEEE 802.3 Hipot requirement and 1.5 kV surge on data port for copper interfaces

Safety agency certifications • US UL 60950

• IEC 60950-1:2001; all national deviations

• EN 60950-1: 2001; all deviations

• CAN/CSA-C22.2 No. 60950-1-03

• AS/NZ TS-001 and 60950:2000; Australia

• UL-AR; Argentina

• UL-GS Mark; Germany

• GOST; Russian Federation

• EN 60825-1 Laser

• EN 60825-2 Laser

• CDRH Laser

SUPPORTED STANDARDSIEEE standards

• IEEE 802.1D STP

• IEEE 802.1p CoS

• IEEE 802.1Q VLANs

• IEEE 802.1ad Provider Bridges Q-in-Q/VLAN stacking

• IEEE 802.1ak (MVRP)

• IEEE 802.1aq (SPB)

• IEEE 802.1Qaz ETS/DCBX

• IEEE 802.1 CEE 1.01

• IEEE 802.1Qbb PFC

• IEEE 802.1s MSTP

• IEEE 802.1w RSTP

• IEEE 802.1X Port-based Network Access Control (PNAC).

• IEEE 802.3x Flow Control

• IEEE 802.3u Fast Ethernet

• IEEE 802.3z 1 GigE

• IEEE 802.3ab 1 GBase-T

• IEEE 802.3ac VLAN Tagging

• IEEE 802.3ad/802.1AX Link Aggregation

• IEEE 802.3ae 10 GigE

• IEEE 802.3an 10 GBase-T

• IEEE 802.3ba 40 GigE

ITU-T recommendations• ITU-T G.8032/Y.1344 2010: Ethernet Ring

Protection (ERPv2)

IETF RFCsIPv4

• RFC 2003 IP/IP Tunneling

• RFC 2784 GRE Tunneling

• RFC 2131 - Dynamic Host Configuration Protocol (DHCPv4)

OSPF

• RFC 1765 OSPF Database Overflow

• RFC 1850/2328 OSPF v2 and MIB

• RFC 2154 OSPF MD5 Signature

• RFC 2370/5250 OSPF Opaque LSA

• RFC 3101 OSPF NSSA Option

• RFC 3623 OSPF Graceful Restart

• RFC 2740 OSPFv3 for IPv6

5


RIP

• RFC 1058 RIP v1

• RFC 1722/1723/2453/1724 RIP v2 and MIB

• RFC 1812/2644 IPv4 Router Requirements

• RFC 2080 RIPng for IPv6

BGP

• RFC 1269/1657/4273 BGP v3 and v4 MIB

• RFC 1403/1745 BGP/OSPF Interaction

• RFC 1771-1774/2842/2918/4271 BGP

• RFC 1965 BGP AS Confederations

• RFC 1966 BGP Route Reflection

• RFC 1997/1998/4360 BGP Communities Attribute

• RFC 2042 BGP New Attribute

• RFC 2385 BGP MD5 Signature

• RFC 2439 BGP Route Flap Damping

• RFC 2545 BGP-4 Multiprotocol Extensions for IPv6 Routing

• RFC 2858/4760 Multiprotocol Extensions for BGP-4



• RFC 4486 Subcodes for BGP Cease Notification

• RFC 4724 Graceful Restart for BGP

• RFC 3392/5492 Capabilities Advertisement with BGP-4

• RFC 5396/5668/6793 BGP 4-Octet and Textual Representation of ASN

IS-IS

• RFC 1142/1195/3719/3787/5308 IS-IS v4

• RFC 2763/2966/3567/3373 Adjacencies and route management

• RFC 5120 M-ISIS: Multi Topology IS-IS

• RFC 5306 Graceful Restart

• RFC 5309/draft-ietf-isis-igp-p2p-over-lan Point to point over LAN

• RFC 6329 IS-IS Extensions Supporting IEEE 802.1aq SPB

IP Multicast

• RFC 1075/draft-ietf-idmr-dvmrp-v3-11.txt DVMRP

• RFC 2365 Multicast

• RFC 2710/3019/3810/MLD v2 for IPv6

• RFC 2715 PIM and DVMRP interoperability

• RFC 2933 IGMP MIB

• RFC 3376 IGMPv3 (includes IGMP v2/v1)

• RFC 3569 Source-Specific Multicast (SSM)

• RFC 3973 Protocol Independent Multicast-Dense Mode (PIM-DM)

• RFC 4087 IP Tunnel MIB

• RFC 4541 Considerations for IGMP and MLD Snooping Switches

• RFC 4601/5059 PIM-SM

• RFC 5015 BiDIR PIM

• RFC 5060 Protocol Independent Multicast MIB

• RFC 5240 PIM Bootstrap Router MIB

• RFC 5132 Multicast Routing MIB

IPv6

• RFC 1981 Path MTU Discovery

• RFC 2460 IPv6 Specification

• RFC 2464 IPv6 over Ethernet

• RFC 2465 MIB for IPv6: Textual Conventions (TC) and General Group

• RFC 2466 MIB for IPv6: ICMPv6 Group

• RFC 2711 Router Alert Option

• RFC 3056 6to4 Tunnels

• RFC 3315 Dynamic Host Configuration Protocol for IPv6 (DHCPv6)

• RFC 3484 Default Address Selection

• RFC 3493/2553 Basic Socket API

• RFC 3542/2292 Advanced Sockets API

• RFC 3587/2374 Global Unicast Address Format

• RFC 3595 TC for IPv6 Flow Label

• RFC 3596/1886 DNS for IPv6

• RFC 4007 Scoped Address

• RFC 4022/2452 MIB for IPv6 TCP

• RFC 4113/2454 MIB for IPv6 UDP

• RFC 4193 Unique Local Addresses

• RFC 4213/2893 Transition Mechanisms

• RFC 4291/3513/2373 Addressing Architecture (uni/any/multicast)

• RFC 4301/2401 Security Architecture

• RFC 4302/2402 IP Authentication Header

• RFC 4303/2406 IP Encapsulating Security Payload (ESP)

• RFC 4308 Cryptographic Suites for IPsec

• RFC 4443/2463 ICMPv6

• RFC 4861/2461 Neighbor Discovery

• RFC 4862/2462 Stateless Address Autoconfiguration

• RFC 5095 Deprecation of Type 0 Routing Headers in IPv6

Manageability

• RFC 854/855 Telnet and Telnet options

• RFC 959/2640 FTP

• RFC 1350 TFTP Protocol

• RFC 1155/2578-2580 SMI v1 and SMI v2

• RFC 1157/2271 SNMP

• RFC 1212/2737 MIB and MIB-II

• RFC 1213/2011-2013 SNMP v2 MIB

• RFC 1215 Convention for SNMP Traps

• RFC 1573/2233/2863 Private Interface MIB

• RFC 1643/2665 Ethernet MIB

• RFC 1867 Form-based File Upload in HTML

• RFC 1901-1908/3416-3418 SNMP v2c

• RFC 2096 IP MIB

• RFC 2131 DHCP Server/Client

• RFC 2388 Returning Values from Forms: multipart/form-data

• RFC 2396 Uniform Resource Identifiers (URI): Generic Syntax

• RFC 2570-2576/3411-3415 SNMP v3

• RFC 2616 /2854 HTTP and HTML

• RFC 2667 IP Tunneling MIB

• RFC 2668/3636 IEEE 802.3 MAU MIB

• RFC 2674 VLAN MIB

• RFC 3023 XML Media Types

• RFC 3414 User-based Security Model

• RFC 4122 A Universally Unique IDentifier (UUID) URN Namespace

• RFC 4234 Augmented BNF for Syntax Specifications: ABNF

• RFC 4251/4418 Secure Shell Protocol Architecture with UMAC Message Authentication

• RFC 4252/4253 The Secure Shell (SSH) Authentication Protocol and Transport Layer Protocol

• RFC 4627 JavaScript Object Notation (JSON)

• RFC 6585 Additional HTTP Status Codes

Security

• RFC 1321 MD5

• RFC 2104 HMAC Message Authentication

• RFC 2138/2865/2868/3575 /2618 RADIUS Authentication and Client MIB

• RFC 2139/2866/2867/2620 RADIUS Accounting and Client MIB

• RFC 2228 FTP Security Extensions

• RFC 2284 PPP EAP

• RFC 2869/2869bis RADIUS Extension

• RFC 4301 Security Architecture for IP

• RFC 1826/1827/4303/4305 Encapsulating Payload (ESP) and crypto algorithms

QoS

• RFC 896 Congestion Control

• RFC 1122 Internet Hosts

• RFC 2474/2475/2597/3168/3246 DiffServ

• RFC 3635 Pause Control

• RFC 2697 srTCM

• RFC 2698 trTCM

Others

• RFC 791/894/1024/1349 IP and IP/Ethernet

• RFC 792 ICMP

• RFC 768 UDP

• RFC 793/1156 TCP/IP and MIB

6


• RFC 826 ARP

• RFC 919/922 Broadcasting Internet Datagram

• RFC 925/1027 Multi-LAN ARP/Proxy ARP

• RFC 950 Subnetting

• RFC 951 BOOTP

• RFC 1151 RDP


• RFC 1256 ICMP Router Discovery

• RFC 1305/2030 NTP v3 and Simple NTP

• RFC 1493 Bridge MIB

• RFC 1518/1519 CIDR

• RFC 1541/1542/2131/3396/3442 DHCP

• RFC 1757/2819 RMON and MIB

• RFC 2131/3046 DHCP/BootP Relay

• RFC 2132 DHCP Options

• RFC 2251 LDAP v3

• RFC 2338/3768/2787 VRRP and MIB

• RFC 3021 Using 31-bit Prefixes

• RFC 3060 Policy Core

• RFC 3176 sFlow

• IETF draft “IP/IPVPN services with IEEE 802.1aq SPB networks”


• OpenFlow Switch Specification, Version 1.3.1

• OpenFlow Switch Specification, Version 1.0.0

• RFC 7348 Virtual eXtensible Local Area Network (VXLAN)

Table 1. Chassis model

OMNISWITCH 10K

Fan tray slots 12, 8 NI slots, 2 half-slots for CMM/CFM

Management module slots (CMM) 2

Fabric module slots (CFM) 2

Network interface slots (NI) 8

Current switching capacity per NI (b/s or pps) 640 Gb/s / 480 Mb/s

Raw switching capacity per slot (b/s or p/s) 1280 Gb/s / 960 Mp/s

Power supply (AC/DC) slots 4

Height (19-in. and 23-in. rack mount) 16U

Dimensions (HxWxD) 71.2 x 44.2 x 58.5 cm (28 x 17.4 x 23 in.)

Weight (loaded) 89.8 kg (198 lb)

ENVIRONMENT



Operating and storage humidity 10% to 90% (non-condensing)

Heat dissipation (fully loaded - worst case) 14 572 BTU/h

7


Table 2. Network interface characteristics

MODEL NUMBERS CPU MEMORYPORT COUNT

INTERFACE TYPE

L2 TABLE

L3 TABLE IPV4/IPV6

POLICY TABLE

MPLS*/SPBM SUPPORT

DCB SUPPORT

OS10K-CMM 1.5 GHz dual-core

4 GB SDRAM, 2 GB CF

3 USB, Console, 10/100/1000Base-Tx

N/A N/A N/A N/A N/A

OS10K-CFM N/A N/A 0 N/A N/A N/A N/A N/A N/A

OS10K-GNI-C48E 1.2 GHz dual-core

1.2 GB packet buffer

48 10/100/1000Base-Tx 256K* 512K/256K 4K Yes No

OS10K-GNI-U48E 1.2 GHz dual-core


48 SFP 256K* 512K/256K 2K Yes No

OS10K-XNI-U32S 1.2 GHz dual-core


32 SFP+, SFP 1GigE 32K 512K/256K 2K No No

OS10K-XNI-U32E 1.2 GHz dual-core


32 SFP+, SFP 1GigE 128K 512K/256K 2K Yes Yes

OS10K-XNI-U16E 1.2 GHz dual-core



OS10K-XNI-U16L 1.2 GHz dual-core



OS10K-QNI-U4E 1.2 GHz dual-core


4 QSFP+ 128K 512K/256K 2K Yes Yes

OS10K-QNI-U8E 1.2 GHz dual-core


8 QSFP+ 128K 512K/256K 2K Yes Yes

*Hardware capacity, future software support

ORDERING INFORMATION

Chassis and power supply

MODEL NUMBER DESCRIPTION

OSX-HA-CBA OS10K-HA-CBA is a high availability bundle. The bundle includes 64 ports of 10G, 8 ports of 40G and 4 QSFPs together with Advanced and DC licenses for two (CB) chassis included. The bundle components include: 2 quantities of OS10K8-CB-A, 2 quantities of OS10K-XNI-U32E, 2 quantities of OS10K-QNI-U4E, 2 quantities of OS10K-SW-A, 2 quantities of OS10K-SW-DC and 4 quantities of QSFP-40G-S. Note: Refer to part OS10K8-CB-A bundle for detailed baseline BOM.

OSX-XG-CBA OS10K-XG-CBA is a 10G bundle with 64 ports of 10G and 16 10G SFP-SRs included. The bundle includes: 1 qty of OS10K8-CB-A, 2 quantities of OS10K-XNI-U32E, 1 quantity of OS10K-SW-A, 1 quantity of OS10K-SW-DC and 16 quantities of SFP-10G-SR. Note: Refer to part OS10K8-CB-A bundle for detailed base bundle BOM.

OS10K8-CB-A OS10K base bundle with AC power and SSL (DES, 3DES, RC2, RC4). Base bundle includes 1 x OS10K Chassis, 2 x Fan Trays, 2 x OS10K-PS-25A power supplies, 1 x OS10K-CMM chassis management module, 1 x OS10K-CFM chassis fabric module and fully featured AOS software w/ advanced IP routing SW (IPv4/IPv6). Includes power cord.

OS10K8-CB-D OS10K base bundle with DC power and SSL (DES, 3DES, RC2, RC4). Base bundle includes 1 x OS10K Chassis, 2 x Fan Trays, 2 x OS10K-PS-24D power supplies, 1 x OS10K-CMM chassis management module, 1 x OS10K-CFM chassis fabric module and fully featured AOS software w/ advanced IP routing SW (IPv4/IPv6).

OS10K8-RCB-A OS10K redundant bundle with AC power and SSL (DES, 3DES, RC2, RC4). Redundant bundle includes 1 x OS10K Chassis, 2 x Fan Trays, 4 x OS10K-PS-25A power supplies, 2 x OS10K-CMM chassis management module, 2 x OS10K-CFM chassis fabric module and fully featured AOS software w/ advanced IP routing SW (IPv4/IPv6). Includes power cord.

OS10K8-RCB-D OS10K base bundle with DC power and SSL (DES, 3DES, RC2, RC4). Base bundle includes 1 x OS10K Chassis, 2 x Fan Trays, 3 x OS10K-PS-24D power supplies, 2 x OS10K-CMM chassis management module, 2 x OS10K-CFM chassis fabric module and fully featured AOS software w/ advanced IP routing SW (IPv4/IPv6).

8


Network interface cards


GIGABIT MODULES

OS10K-GNI-C48EOS10K Gigabit network interface card offers 48 wire rate RJ-45 1000Base-T ports. This Enhanced network interface card is MPLS ready, and provides large table support for L2, L3, and ACL policies.

OS10K-GNI-U48EOS10K Gigabit network interface card offers 48 unpopulated wire rate 1000BaseX SFP ports. This Enhanced network interface card is MPLS ready, and provides large table support for L2, L3, and ACL policies.

10 GIGABIT MODULES

OS10K-XNI-U16EOS10K network interface card includes 16 unpopulated 10G SFP+ ports. This Standard interface card does not support MPLS or the large tables for L2, L3, and ACL policies.

OS10K-XNI-U16LOS10K network interface card includes 8 unpopulated 10G SFP+ ports and 8 unpopulated 1G SFP+ ports. 1G ports can be updated to 10G through license upgrade. Supports standard tables for L2, L3 and ACL policies.

OS10K-XNI-U32EOS10K network interface card includes 32 unpopulated 10G SFP+ ports. Supports standard tables for L2, L3 and ACL policies.

OS10K-XNI-U32S OS10K network interface card includes 32 unpopulated 10G SFP+ ports. Supports standard tables for L2, L3 and ACL policies.

40 GIGABIT ETHERNET MODULES

OS10K-QNI-U4E OS10K network interface card includes 4 unpopulated 40G QSFP+ ports. Supports standard tables for L2, L3 and ACL policies.

OS10K-QNI-U8E OS10K network interface card includes 8 unpopulated 40G QSFP+ ports. Supports standard tables for L2, L3 and ACL policies.

SOFTWARE LICENSE

OS10K-U16L-UPG Software Upgrade to provide 10Gb on 8 ports of 1Gb.

OS10K-SW-DC Data Center Software for support of DCBX, FCoE and EVB on OS10K. One license required per chassis.

OS10K-SW-A Advanced Software for support of SPB and Virtual Chassis on OS10K. One license required per chassis.

GE TRANSCEIVERS

SFP-GIG-T 1000Base-T Gigabit Ethernet Transceiver (SFP MSA). SFP works at 1000 Mb/s speed and full-duplex mode.

SFP-GIG-SX 1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA).

SFP-GIG-LX 1000Base-LX Gigabit Ethernet optical transceiver (SFP MSA).

SFP-GIG-LH40 1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Typical reach of 40 km on 9/125 µm SMF.

SFP-GIG-LH70 1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Typical reach of 70 km on 9/125 µm SMF.

10 GE TRANSCEIVERS

SFP-10G-SR10 Gigabit optical transceiver (SFP+). Supports multimode fiber over 850 nm wavelength (nominal) with an LC connector. Typical reach of 300 m.

SFP-10G-LR10 Gigabit optical transceiver (SFP+). Supports monomode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 10 km.

SFP-10G-ER10 Gigabit optical transceiver (SFP+). Supports monomode fiber over 1550 nm wavelength (nominal) with an LC connector. Typical reach of 40 km.

SFP-10G-LRM10 Gigabit optical transceiver (SFP+). Supports multimode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 220 m on FDDI-grade (62.5µm).

SFP-10G-GIG-SRDual-speed SFP+ optical transceiver. Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Supports 1000BaseSX and 10GBASE-SR.

SFP-10G-24DWD80 10 Gigabit DWDM optical tranceiver (SFP+ MSA), 1558.17 nm/Channel 24 (100GHz ITU Grid), 80 km, LC Connector.

SFP-10G-ZR 10 Gigabit industrial optical transceiver (SFP+). Supports data transmission at 1550nm over up to 80km single mode fiber.


OS10K-FAN-TRAY OS10K fan tray. Spare.

OS10K-PS-25A-XX OS10K AC power supply. Provides up to 2.5 kW of power, auto-ranging 110VAC-240VAC. -XX country power cord designator

OS10K-PS-24D OS10K DC power supply. Provides up to 2.4 kW of power. 36v-72v DC input power.

Management and switching fabric modules


OS10K-CMM OS10K Chassis Management Module with SSL (DES, 3DES, RC2, RC4). The OS10K-CMM Chassis Management Module includes a processor module, a fabric module, and AOS software with advanced IP routing SW (IPv4/IPv6).

OS10K-CFM OS10K Chassis Fabric Module. OS10K-CFM provides additional switch capacity and increased fabric redundancy.


SFP-10G-C1M 10 Gigabit direct attached copper cable (1 m, SFP+).



QSFP-40G-SRFour channel 40 Gigabit optical transceiver (QSFP+). Supports link lengths of 100 m and 150 m, respectively, on OM3 and OM4 multimode fiber cables.

QSFP-40G-LRFour channel 40 Gigabit optical transceiver (QSFP+). Supports single mode fiber over 1310nm wavelength. Typical reach of 10 km.

QSFP-40G-C1M 40 Gigabit direct attached copper cable (1 m, QSFP+).



SFP+ DIRECT ATTACHED CABLES

40 GE TRANSCEIVERS

QSFP+ DIRECT ATTACHED CABLES

Contact your Alcatel-Lucent Enterprise reseller for additional information on country-specific power cords and a complete list of our SFP+ and SFP transceivers.

Service and support Warranty

Limited warranty to the original owner of one year on hardware and 90 days on software.

ALCATEL-LUCENT ENTERPRISE OMNISWITCH 6250 STACKABLE FAST ETHERNET LAN SWITCH

The Alcatel-Lucent OmniSwitch™ 6250 is a stackable layer-2+ Fast Ethernet LAN value switch family for both the enterprise and Ethernet access segments. The enterprise models address the small and mid-sized enterprise edge and branch office environments, while the metro models address the residential and business Ethernet access supplied by service providers.

With an optimized design for flexibility and scalability as well as low power consumption, the OmniSwitch 6250 runs the field-proven Alcatel-Lucent Operating System (AOS), providing an outstanding edge solution for highly available, self-protective, easily managed and eco-friendly networks.

Solutions benefiting from the OmniSwitch 6250 family of switches are:

• Edge of small to mid-sized networks

• Branch office enterprise workgroups

• Residential or metro Ethernet triple-play applications

BENEFITS• Provides simplified selection with only

two enterprise models: Power-over-Ethernet (PoE) and non-PoE

• Reduces sparing and inventory costs

• Allows any combination of PoE and non-PoE, up to 192 ports

• Meets the customers’ configuration needs and offers excellent investment protection and flexibility, as well as easy deployment, operation and maintenance

• Small form factor and low noise output make the OmniSwitch 6250 ideal for collocation environments. The low power consumption reduces the operating expenses and cooling costs, which leads to lower operating expenditures (OPEX) and faster return on investment (ROI).

• Leads the industry in price/feature-performance ratio and offers customers a cost-efficient network technology upgrade, without needing to move to a higher-priced, layer-2+ gigabit solution

• Outstanding list of features and performance for supporting scalable, real-time voice, data and video applications for converged networks

• Supports cost-effective installation and deployment with automated switch setup and configuration, as well as end-to-end virtual LAN (VLAN) provisioning

• A field-upgradeable solution that makes the network highly available and reduces OPEX

• Fully secures the network at the edge at no additional cost

• The lifetime warranty eliminates service program costs and ongoing service renewals, lowering total cost of ownership (TCO) and allowing customers to reach ROI targets more quickly

• Simplifies metro Ethernet network OAM for service providers

OmniSwitch 6250-24/P24/24M/24MD

OmniSwitch 6250-8M

2

Alcatel-Lucent Omniswitch 6250ALCATEL-LUCENT ENTERPRISE DATA SHEET

FEATURES• Offers innovative half-rack-wide

models for a great variety of switch combination deployments

• Highly efficient and optimized in their form factor, power consumption and acoustic output

• A feature-rich, cost-effective, 10/100 stackable switch built on the latest ASIC technologies

• Scalability from 24 to 192 Fast Ethernet and 16- gigabit uplink ports

• The Alcatel-Lucent virtual chassis design provides resiliency with integrated 5 G HDMI performance

• Optional metro services feature license for service provider deployments

• Support for IEEE 802.3af as well as IEEE 802.3at-compliant PoE

• AC or DC redundant power supplies

• Limited Lifetime Warranty Software and Hardware Support included

MANAGEMENT• AOS field-proven software with

management through web interface (WebView), command line interface (CLI), and Simple Network Management Protocol (SNMP)

• Supporting programmable AOS OpenFlow for the creation of specialized services.

• Ethernet operations, administration and management (OA&M) support for service configuration and monitoring

• Support by Alcatel-Lucent OmniVista™ 2500 Network Management System (NMS)

• Alcatel-Lucent 5620 Service Aware Manager (SAM) applications for service providers

SECURITY• Flexible device and user authentication

with Alcatel-Lucent Access Guardian (IEEE 802.1x/MAC/captive portal) with Host Integrity Check (HIC) enforcement

• Enables deployment of comprehensive and secure BYoD services in enterprise networks such as guest management, device on-boarding, device posturing, application management and dynamic change of authentication (CoA).

• Advanced Quality of Service (QoS) and Access Control Lists (ACLs) for traffic control, including an embedded Denial of Service (DoS) engine to filter out unwanted traffic attacks

• Extensive support of user-oriented features such as learned port security (LPS), port mapping, Dynamic Host Configuration Protocol (DHCP) binding tables and User Network Profile (UNP)

PERFORMANCE AND REDUNDANCY• Advanced layer-2+ features with basic

layer-3 routing for both IPv4 and IPv6

• Triple- speed (10/100/1000) user interfaces and fiber interfaces (SFPs) supporting 100Base X or 1000Base-X optical transceivers

• Wire-rate switching and routing performance

• High availability with virtual chassis concept, redundant stacking links, primary/secondary unit failover, hot-swappable power options and configuration rollback

CONVERGENCE• Enhanced Voice over IP (VoIP) and video

performance with policy-based QoS

• Support for multimedia applications with wire-rate multicast

• Airgroup™ Network Services for Bonjour®- speaking devices provides consistent experience over wireless and wired networks

• IEEE 802.3at PoE+ support for IP phones, wireless LAN (WLAN) access points and video cameras

CHASSIS 10/100 RJ-45 PORTS

GIGABIT COMBO PORTS

HDMI STACKING (2.5 GB/S)

PRIMARY POWER BACKUP POWER

Non-PoE models

OS6250-24 24 2 2 Internal AC External AC brick supply

Non-PoE models

OS6250-P24 24 2 2 225 W, external AC supply 225 W, external AC supply

AVAILABLE OMNISWITCH 6250 MODELS

24-port models

• The combo ports are configurable to 10/100/1000Base-T or may use 100/1000Base-X based transceivers.

The OmniSwitch 6250 metro models support additional metro software features outlined later in this document.• The combo ports are configurable to 10/100/1000Base-T or may use 100/1000Base-X based transceivers.• The SFP ports of the “M” model support only gigabit transceivers or OmniSwitch 6250 small form factor pluggable (SFP) direct stacking cable.


GIGABITCOMBO PORTS

DAC STACKING (2.5 GB/S)

PRIMARYPOWER

BACKUPPOWER

OS6250-8M 8 2 2 Internal AC supply N/A

OS6250-24M 24 2 2 Internal AC supply External DC brick supply

OS6250-24MD 24 2 2 Internal DC supply External DC brick supply

AVAILABLE OMNISWITCH 6250 METRO MODELS

8- and 24-port models

3


DETAILED PRODUCT FEATURES Simplified management Configuration management interfaces

• Intuitive Alcatel-Lucent command line interface (CLI) with familiar interface, reducing training costs

• Easy-to-use, point-and-click web-based element manager (WebView) with built-in help for easy configuration

• Integration with Alcatel-Lucent OmniVista™ 2500 for network management

• Full configuration and reporting using SNMPv1/2/3 across all OmniSwitch families to facilitate third-party network management system (NMS) integration

• Remote Telnet management or Secure Shell access using SSHv2

• File upload using USB, TFTP, FTP, SFTP, or SCP for faster configuration

• Human-readable ASCII-based configuration files for off-line editing and bulk configuration

• Managed by Alcatel-Lucent 5620 Service Aware Manager

Monitoring and troubleshooting

• Local (on the flash) and remote server logging: Syslog and command log

• Port-based mirroring for troubleshooting and lawful interception supports four sessions with multiple sources-to-one destinations

• Policy-based mirroring that allows selecting the type of traffic to mirror by using QoS policies

• Remote port mirroring that facilitates passing mirrored traffic through the network to a remotely connected device

• Port monitoring feature that allows capturing Ethernet packets to a file, or to an on-screen display to assist in troubleshooting

• sFlow v5 and RMON for advanced monitoring and reporting capabilities for statistics, history, alarms and events

• IP tools: Ping and trace route

• Digital Diagnostic Monitoring (DDM): Real-time diagnostics of fiber connections for early detection of optical signal deterioration

• Time Domain Reflectometry (TDR) for locating breaks or other discontinuity in copper cables

Network configuration

• Remote auto-configuration download

• Auto-negotiating 10/100/1000 ports automatically configure port speed and duplex setting

• Auto MDI/MDIX configureing transmit and receive signals to support straight-through and crossover cabling

• BOOTP/DHCP client that allows auto-configuring switch IP information for simplified deployment

• DHCP relay for forwarding client requests to a DHCP server

• Alcatel-Lucent Mapping Adjacency Protocol (AMAP) for building topology maps

• IEEE 802.1AB Link Layer Discovery Protocol (LLDP) with MED extensions for automated device discovery

• Multiple VLAN Registration Protocol (MVRP) for IEEE 802.1Q-compliant virtual LAN (VLAN) pruning and dynamic VLAN creation

• Auto QoS for switch management traffic and traffic from Alcatel-Lucent IP phones

• Network Time Protocol (NTP) for network-wide time synchronization

• Stackable to eight units

Resiliency and high availability • Ring Rapid Spanning Tree (RRSTP)

optimized for ring topology to provide less than 100 ms convergence time

• IEEE 802.1s Multiple Spanning Tree Protocol: Encompasses IEEE 802.1D STP and IEEE 802.1w Rapid Spanning Tree Protocol

• Per-VLAN spanning tree (PVST) and Alcatel-Lucent 1x1 STP mode

• Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) and static LAG groups across modules

• Dual-home link (DHL) support for sub-second link protection without STP

• Virtual Router Redundancy Protocol (VRRP) providing highly available routed environments

• Broadcast and multicast storm control to avoid degradation in overall system performance

• Unidirectional Link Detection (UDLD) for detecting and disabling unidirectional links on fiber optic interfaces

• Layer-2 port loopback detection for preventing customer loops on Ethernet access ports

• Redundant and hot-swappable power supplies, transceiver modules offering uninterruptable service

• Dual-image and dual-configuration file storage provide backup

Advanced security Access control

• AOS Access Guardian framework for comprehensive user-policy-based network access control (NAC)

• Auto-sensing IEEE 802.1X multi-client, multi-VLAN MAC-based authentication for non-802.1X hosts

• Web-based authentication (Captive Portal): A customizable web portal residing on the switch that can be used for authenticating supplicants as well as non-supplicants

• Group mobility rules and “guest” VLAN support

• Host integrity check (HIC) agent on each switch makes it an HIC enforcer and facilitates endpoint device control for company policy compliance. Support for quarantine and remediation as required.

• Support for dynamic change of authentication (CoA) and enforcing traffic remediation or restriction for non-compliant devices

• User network profile (UNP): Simplify NAC management and control by dynamically providing predefined policy configuration to authenticated clients (VLAN, ACL, BW, HIC)

• SSH for secure CLI session with public key infrastructure (PKI) support

• Centralized Remote Access Dial-In User Service (RADIUS) and LDAP user authentication

• Private VLAN feature for user traffic segregation

Containment, monitoring and quarantine

• DHCP snooping, DHCP IP spoof protection

• Terminal Access Controller Access Control System Plus (TACACS+) client allowing authentication, authorization and accounting with a remote TACACS+ server

• Dynamic ARP protection and ARP poisoning detection

4


• ACLs filtering out unwanted traffic including DoS attacks; flow-based filtering in hardware (L1 to L4)

• BPDU blocking: Automatically shutting down user ports if an STP BPDU packet is seen to prevent topology loops

• STP Root Guard: Prevents edge devices from becoming Spanning Tree Protocol root nodes

Converged networks PoE

• PoE models support Alcatel-Lucent IP phones and WLAN access points, as well as any IEEE 802.3af or IEEE 802.3at-compliant end devices

• Configurable per-port PoE priority and max power for power allocation

• Dynamic PoE allocation: Delivering only the power needed by the powered devices (PD) up to the total power budget for most efficient power consumption

QoS

• Priority queues: Eight hardware-based queues per port for flexible QoS management

• Traffic prioritization: Flow-based QoS with internal and external (remarking) prioritization

• Bandwidth management: Flow-based bandwidth management, ingress rate limiting; egress rate shaping per port

• Queue management: Configurable scheduling algorithms, including Strict Priority Queuing (SPQ), Weighted Round Robin (WRR) and Deficit Round Robin (DRR)

• Congestion avoidance: Support for End-to-End Head-Of-Line (E2E-HOL) Blocking Protection

• Auto QoS for switch management traffic as well as traffic from Alcatel-Lucent IP phones

• Three-color marker: Single/Dual Rate policing with commit BW, excess BW and burst size

Layer-2, Layer-3 Routing and Multicast Layer-2 switching

• Up to 16,000 MACs

• Up to 4000 VLANs

• Up to 2000 ACLs

• Latency: < 4 µs

• Max Frame: 9216 bytes (jumbo)

IPv4 and IPv6

• Static routing for IPv4 and IPv6

• RIP v1 and v2 for IPv4; RIPng for IPv6

• Up to 256 IPv4 and 128 IPv6 static and RIP routes

• Up to 128 IPv4 and 16 IPv6 interfaces

• Up to 1k Arp entries

Multicast

• IGMPv1/v2/v3 snooping for optimized multicast traffic


• Up to 1000 multicast groups per stack

• IP Multicast VLAN (IPMVLAN) for optimized multicast replication at the edge, saving network core resources

Network protocols

• DHCP relay including generic UDP relay

• ARP



• Generic User Datagram Protocol (UDP) relay per VLAN


Metro Ethernet access (features available through Metro license upgrade)

• Ethernet services support per IEEE 802.1ad Provider Bridge

¬ Transparent LAN Services with Service VLAN (SVLAN) and Customer VLAN (CVLAN) concept

¬ Ethernet network-to-network interface (NNI) and user network interface (UNI) services

¬ Service Access Point (SAP) profile identification

¬ CVLAN to SVLAN translation and mapping

• IEEE 802.1ag Ethernet OAM: Connectivity Fault Management (L2 ping and link trace)

• Ethernet OAM compliant with IEEE 802.3ah

• ITU-T G.8032 Ethernet Ring Protection designed for loop protection and fast convergence times (< 50 ms) in ring topologies


• Service Assurance Agent (SAA) for proactively measuring network health, reliability and performance. Four SAA tests including L2-MAC, IP, ETH-LB and ETH-DMM depending on network requirements

• Customer provider edge (CPE) test head traffic generator and analyzer tool used in the metro Ethernet network to validate customer Service Level Agreements (SLAs)

• IPMVLAN for optimized multicast replication at the edge, saving network core resources

• Layer-2 Multicast VLAN Replication (MVR) that allows users from different multicast VLANs to subscribe to a multicast group from an upstream trunk interface

• Three-color marker: Single/Dual Rate policing with commit BW, excess BW and burst size

• TR-101 PPPoE Intermediate Agent allowing the PPPoE network access method

• MAC-forced forwarding support according to RFC 4562

• Layer-2 Control Protocol (L2CP) for tunneling a customer’s L2CP frames through a well-known address, on a given UNI for Ethernet Private Line (EPL) and Ethernet Virtual Private Line (EVPL) services

• Dying Gasp through SNMP and Ethernet OAM delivery

• Metro Ethernet Forum CE 2.0 Certified

• Managed by Alcatel-Lucent 5620 SAM

5


TECHNICAL SPECIFICATIONS

OS6240-24 OS6250-P24 OS6250-8M OS6250-24M OS6250-24MD

RJ-45 100/100 ports 24 24 8 24 24

RJ-45/SFP Gb combo ports 2 2 2 2 2

HDMI stacking ports 2 2 0 0 0

SFP uplink/stacking ports 0 0 2 2 2

PoE ports 0 24 FE or 22FE + 2 GE 0 0 0

Max unit per stack 8* 8* 2 2 2

Dimensions OS6240-24 OS6250-P24 OS6250-8M OS6250-24M OS6250-24MD

Switch width 21.5 cm (8.50 in.) 21.5 cm (8.50 in.) 21.5 cm (8.50 in.) 21.5 cm (8.50 in.) 21.5 cm (8.50 in.)

Switch height 4.4 cm (1.73 in.) 4.4 cm (1.73 in.) 4.4 cm (1.73 in.) 4.4 cm (1.73 in.) 4.4 cm (1.73 in.)

Switch depth(no PS shelf attached) 29.21 cm (11.5 in.) 29.21 cm (11.5 in.) 29.21 cm (11.5 in.) 29.21 cm (11.5 in.) 29.21 cm (11.5 in.)

Switch depth(with PS shelf attached) 47.6 cm (18.88 in.) 47.6 cm (18.88 in.) N/A N/A N/A

Switch weight (no PS shelf) 1.72 kg (3.80 lb) 1.72 kg (3.80 lb) 1.72 kg (3.80 lb) 1.72 kg (3.80 lb) 1.72 kg (3.80 lb)

Switch tray weight 0.61 kg (1.35 lb) 0.61 kg (1.35 lb) 0.61 kg (1.35 lb) 0.61 kg (1.35 lb) 0.61 kg (1.35 lb)

Performance OS6240-24 OS6250-P24 OS6250-8M OS6250-24M OS6250-24MD

Raw switch capacity (aggregated) 24.8 Gb/s 24.8 Gb/s 21.6 Gb/s 24.8 Gb/s 24.8 Gb/s

Throughput no stacking at aggregated port speeds

13 Mpps@ 8.8 Gb/s

13 Mpps@ 8.8 Gb/s

14.3 Mpps @ 9.6 Gb/s

19 Mpps @12.8 Gb/s

19 Mpps @ 12.8 Gb/s

Throughput with stacking at aggregated port speeds

28 Mpps@ 18.8 Gb/s

28 Mpps@ 18.8 Gb/s

23.2 Mpps @ 15.6 Gb/s

28 Mpps @ 18.8 Gb/s

28 Mpps @ 18.8 Gb/s

Stacking capacity (aggregated) 10 Gb/s 10 Gb/s 10 Gb/s 10 Gb/s 10 Gb/s

Operating conditions OS6240-24 OS6250-P24 OS6250-8M OS6250-24M OS6250-24MD

Operating temperature 0°C to 45°C(32°F to 113°F)

0°C to 45°C(32°F to 113°F)

0°C to 45°C(32°F to 113°F)

0°C to 45°C(32°F to 113°F)

0°C to 45°C(32°F to 113°F)

Storage temperature -40°C to +75°C(-40°F to +167°F)

-40°C to +75°C(-40°F to +167°F

-40°C to +75°C(-40°F to +167°F)

-40°C to +75°C(-40°F to +167°F)

-40°C to +75°C(-40°F to +167°F)

Humidity (operating and storage) 5% to 95% 5% to 95% 5% to 95% 5% to 95% 5% to 95%

MTBF (hours) 268,730 189,585 290,108 268,698 268,715

Fanless design Yes 1 fan Yes Yes Yes

Acoustic (dB) – all fans on* Silent < 35 db(A) Silent Silent Silent

System power consumption (watts)** 17.40 W 24.90 W 12.80 W 16.20 W 15.89 W

Heat dissipation (BTU)*** 59 85 44 55 54

AVAILABLE OMNISWITCH 6250 MODELS: TECHNICAL SPECIFICATIONS

* Acoustic levels measured with a single power supply at room temperature** Power consumption measured with 64 byte packets at varied traffic conditions on all ports, including the 10GE stacking module (accounting for 8 W).

OmniSwitch 6250 backup power supplies and specificationsThe backup power supplies for the OmniSwitch 6250-24 and OmniSwitch 6250-24MD models come in the form of a power brick in either AC or DC variant and may be mounted to the back of the chassis using the power shelf with securing brackets. All of the required parts are included in the backup power supply kits.

The OmniSwitch 6250-P24 external 225 W power supply acts as both the primary supply and the redundant supply. The primary supply/tray combination is attached directly to the back of the chassis. The redundant supply/tray combination is mounted to the side of the switch and attached using remote cable.

ENTERPRISE MODELS METRO MODELS

6


SPECIFICATION OS6250-BP OS6250-BP-P OS6250-BP-D

Style Brick Framed Brick

Internal/external Internal External External

Input voltage 90-220V AC 90-220V AC 36-72V DC

Output voltage 12V DC 12V DC/54.5V DC 12V DC

Wattage 42 W 225 W 30 W

PoE power budget N/A 180 W N/A

Power supply efficiency 85% 80% 85%

Weight 0.21 kg (0.45 lb) 0.25 kg (0.55 lb) 1.04 kg (2.30 lb)

Total RU with BPS 1 RU 1 or 2 RU 1 RU

Models supported OS6250-24/24M OS6250-P24 OS6250-24/24MD

Power supply shelf

The power supply shelf holds one brick or PoE style backup power supply, and it is mounted to the rear of the unit. Any backup power supply and shelf may be mounted in a side-by-side configuration to the switch using the supplied mounting ears. This feature allows for space-sensitive installations requiring reduced depth (for example, in a wall-mounted cabinet).

INDICATORS System LEDs

• System (OK) (chassis HW/SW status)

• PWR (primary power supply status)

• PRI (virtual chassis primary)

• BPS (backup power status)

• LED segment display indicates the stack ID of the unit in the stack: 1 to 8 (24/48 port models)

Per-port LEDs

• 10/100/1000: PoE, link/activity

• SFP: Link/activity

• Stacking: Link/activity

Compliance and certifications Commercial

• EMI/EMC

• FCC CRF Title 47 Subpart B (Class A limits. Note: Class A with UTP cables)

• VCCI (Class A limits. Note: Class A with UTP cables)

• AS/NZS 3548 (Class A limits. Note: Class A with UTP cables)

• CE-Mark: Marking for European countries (Class A limits. Note: Class A with UTP cables)

• CE-Mark

¬ Low Voltage Directive

¬ EMC Directive

¬ RoHS Directive

• EN 55022 (EMI and EMC requirement)

• EN 61000-3-3

• EN 61000-3-2 (Limits for harmonic current emissions)

• EN 55024 (ITE Immunity characteristics)

¬ EN 61000-4-2

¬ EN 61000-4-3

¬ EN 61000-4-4

¬ EN 61000-4-5

¬ EN 61000-4-6

¬ EN 61000-4-8

¬ EN 61000-4-11

• IEEE802.3: Hi-Pot Test (2250 V DC on all Ethernet ports)

• EN 50581 Standard for technical documentation for RoHS recast

Safety agency certifications

• CB Scheme: Certification per IEC 60950/EN 60950 with all different country deviations

¬ UL 60950 United States

¬ IEC 60950-1 all national deviations

¬ EN 60950-1 (Electric/Health & Safety), all national deviations

¬ CAN/CSA-C22.2 No. 60950-1-03

¬ NOM-019 SCFI, Mexico

¬ AS/NZ TS-001 and 60950, Australia

¬ UL-AR, Argentina

¬ UL-GS Mark, Germany

• IEC 60825-1 Laser, IEC 60825-2 Laser

• CDRH Laser

Supported standards • IEEE 802.1D (STP)

• IEEE 802.1p (CoS)

• IEEE 802.1Q (VLANs)

• IEEE 802.1ad (Provider Bridge) Q-in-Q (VLAN stacking)

• IEEE 802.1ag (Connectivity Fault Management)

• IEEE 802.1s (MSTP)

• IEEE 802.1w (RSTP)

• IEEE 802.1X (Port Based Network Access Protocol)

• IEEE 802.3i (10Base-T)

• IEEE 802.3u (Fast Ethernet)

• IEEE 802.3x (Flow Control)

• IEEE 802.3z (Gigabit Ethernet)

• IEEE 802.3ab (1000Base-T)

• IEEE 802.3ac (VLAN Tagging)

• IEEE 802.3ad (Link Aggregation)

• IEEE 802.3af (Power-over-Ethernet)

• IEEE 802.3at (Power-over-Ethernet)

• IEEE 802.ah (Ethernet first mile)

• IEEE 802.3az (Energy Efficient Ethernet)

ITU-T recommendations • ITU-T Y.1731 OA&M fault and performance

management

• ITU-T G.8032/Y.1344 2010: Ethernet Ring Protection (ERPv2)

IETF RFCs RIP

• RFC 1058 RIP v1

• RFC 1722/1723/1724/2453 RIP v2 and MIB

• RFC 1812/2644 IPv4 Router Requirement


IP Multicast

• RFC 1112 IGMP v1

• RFC 2236/2933 IGMP v2 and MIB


• RFC 3376 IGMPv3 for IPv6

IPv6 • RFC 1886 DNS for IPv6

• RFC 2292/2373/2374/2460/2462

• RFC 2461 NDP

• RFC 2463/2466 ICMP v6 and MIB

7


• RFC 2452/2454 IPv6 TCP/UDP MIB

• RFC 2464/2553/2893/3493/3513

• RFC 3056 IPv6 Tunneling

• RFC 3542/3587 IPv6

• RFC 4007 IPv6 Scoped Address Architecture

• RFC 4193 Unique Local IPv6 Unicast Addresses

Manageability • RFC 854/855 Telnet and Telnet options

• RFC 959/2640 FTP

• RFC 1155/2578-2580 SMI v1 and SMI v2

• RFC 1157/2271 SNMP


• RFC 1213/2011-2013 SNMP v2 MIB





• RFC 1901-1908/3416-3418 SNMP v2c

• RFC 2096 IP MIB


• RFC 2570-2576/3411-3415 SNMP v3

• RFC3414 User-based Security Model



• RFC 2668/3636 IEEE 802.3 MAU MIB


• RFC 2818 HTTPS over SSL

• RFC 4251 Secure Shell Protocol Architecture

• RFC 4252 The Secure Shell (SSH v2) Authentication Protocol

Security • RFC 1321 MD5


• RFC 2138/2865/2868/3575/2618 RADIUS Authentication and Client MIB


• RFC 2228 FTP Security Extensions step


• RFC 2869/3579 Radius Extension

Quality of service • RFC 896 Congestion Control


• RFC 2474/2475/2597/3168/3246 DiffServ


• RFC 2697 srTCM

• RFC 2698 trTCM

Others • RFC 791/894/1024/1349 IP and IP/

Ethernet

• RFC 792 ICMP

• RFC 768 UDP


• RFC 826/903 ARP and Reverse ARP


• RFC 925/1027 Multi LAN ARP/Proxy ARP


• RFC 951 BOOTP

• RFC 1151 RDP





• RFC 1518/1519 CIDR

• RFC 1541/1542/2131/3396/3442 DHCP


• RFC 2131/3046 DHCP/BOOTP Relay




• RFC 3176 sFlow

• RFC 3021 Using 31-bit Prefix

ORDERING INFORMATIONPART NUMBER DESCRIPTION

OS6250-8M OS6250-8M Fast Ethernet chassis with AOS Metro softwareChassis provides 8 RJ-45 ports configurable to 10/100Base-T, 2 SFP/RJ-45 combo ports configurable to be 10/100/1000Base-T or 100/1000Base-X and 2 SFP fiber ports configurable to be 1G uplinks or 2.5 G stacking ports in a 1U by half-rack form factor with internal AC power supply.

OS6250-24M OS6250-24MD

OS6250-24M Fast Ethernet chassis with AOS Metro softwareChassis provides 24 RJ-45 ports configurable to 10/100Base-T, 2 RJ-45/SFP combo ports configurable to be 10/100/1000Base-T or 100/1000Base-X and 2 SFP fiber ports configurable to be 1 G uplinks or 2.5 G stacking ports in a 1U by half-rack form factor with internal AC or DC power supply respectively.

OS6250-24 OS6250-24 Fast Ethernet chassis with AOS Enterprise softwareChassis includes 24 RJ-45 ports configurable to 10/100Base-T, 2 RJ-45/SFP combo ports configurable to be 10/100/1000Base-T or 100/1000Base-X and 2 dedicated 2.5 G HDMI stacking ports. Ethernet SFP optical transceivers, HDMI stacking cables and backup power supply can be ordered separately.

OS6250-P24 OS6250-P24 Fast Ethernet chassis with AOS Enterprise softwareChassis includes 24 PoE RJ-45 ports configurable to 10/100Base-T, 2 SFP/PoE RJ-45 combo ports configurable to be 10/100/1000Base-T or 100/1000Base-X and 2 dedicated 2.5 G HDMI stacking ports in a 1U by half-rack form factor with external AC PoE supply. Includes 225 W AC PoE supply and power shelf.

BOS6250-48 Two OS6250-24 units with AOS Enterprise software bundled for side-by-side mounting in a 19-in. by 1U rack space providing a total of 48 Fast Ethernet and 4 RJ-45/SFP combo ports

BOS6250-P48 Two OS6250-P24 units with AOS Enterprise software bundled for side-by-side mounting within a 19-in. by 1U rack space for a total of 48 PoE Fast Ethernet ports and 4 PoE RJ-45/SFP combo ports. Includes two 225 W supplies and power shelves.

Ethernet SFP optical transceivers and SFP direct connect stacking cable can be ordered separately.Above bundles include country-specific power cords, user manuals access cards, software download access cards, R J- 45 to DB-9 adapters and hardware for mounting unit side by side with another OmniSwitch 6250 in a 19-in. rack.Order mounting tray kit (OS6250-RM-19) for single-mounting the unit in a 19-in. rack

8


LICENSE OPTIONS SUPPORTED ON ANY NON-“M” MODELS ABOVE.

OS6250-SW-ME OS6250 Software license enables the Metro Software features outlined in the Metro Ethernet Access section of this data sheet.

PART NUMBER DESCRIPTION

Power Supplies

OS6250-BP OS6250-BP 40 W power brick AC backup power supply. Provides backup power to one non-PoE switch.Ships with country-specific power cord, backup power supply tray and securing brackets.

OS6250-BP-P OS6250-BP-P 225 W AC PoE backup power supply. Provides backup power to one PoE switch. Ships with country-specific power cord and backup power supply tray.

OS6250-BP-D OS6250-BP-D 30 W DC power brick backup power supply. Provides backup DC power to one non-PoE switch. Ships with chassis connection cable, backup power supply tray and securing brackets.

CABLES AND MOUNTING

OS6250-CBL-30 OS6250 30-cm long HDMI stacking cable



OS6250M-CBL-30 OS6250M 30-cm long SFP direct stacking cable



OS6250-RM-19 Tray kit for mounting one OmniSwitch 6250 in a 19-in. rack

OS6250-DUAL-MNT Two mounting and sliding brackets replacement kit. Hardware to mount two 6250 units in a 19-in. rack

GIGABIT TRANSCEIVERS

SFP-GIG-LH70 1000Base-LH transceiver with an LC interface for single-mode fiber over 1550 nm wavelength.Typical reach of 70 km

SFP-GIG-LH40 1000Base-LH transceiver with an LC interface for single-mode fiber over 1310 nm wavelength.Typical reach of 40 km

SFP-GIG-LX 1000Base-LX transceiver with an LC interface for single-mode fiber over 1310 nm wavelength. Typical reach of 10 km

SFP-GIG-SX 1000Base-SX transceiver with an LC interface for multimode fiber over 850 nm wavelength.Typical reach of 300 m

SFP-GIG-BX-D 1000Base-BX bidirectional transceiver with an LC-type interface for use over single-mode fiber on asingle strand link up to 10 km point-to-point. Transmits 1490 nm and receives 1310 nm optical signal

SFP-GIG-BX-U 1000Base-BX bidirectional transceiver with an LC-type interface for use over single-mode fiber on asingle strand link up to 10 km point-to-point. Transmits 1310 nm and receives 1490 nm optical signal

100 MEGABIT TRANSCEIVERS

SFP-100-MM 100Base-FX transceiver with an LC interface for multimode fiber optic cable

SFP-100-SM15 100Base-FX transceiver with an LC-type interface for single-mode fiber optic cable up to 15 km

SFP-100-SM40 100Base-FX transceiver with an LC-type interface for single-mode fiber optic cable up to 40 km

SFP-100-BX-U 100Base-BX bidirectional transceiver with an SC-type interface for use over single-mode fiber on a single strand link up to 20 km point-to-point, where the client (ONU) transmits 1310 nm and receives 1550 nm optical signal

SFP-100-BX-D 100Base-BX bidirectional transceiver with an SC-type interface for use over single-mode fiber on a single strand link up to 20 km point-to-point, where the client (OLT) transmits 1550 nm and receives 1310 nm optical signal

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view Alcatel-Lucent Enterprise trademarks visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent Enterprise assumes no responsibility for inaccuracies contained herein. Copyright © 2015 Alcatel-Lucent Enterprise. All Rights Reserved. 201501260004EN (February)

Warranty information – OmniSwitch 6250 Lifetime SupportAlcatel-Lucent Enterprise includes a Limited Lifetime Warranty with the purchase of your OmniSwitch 6250 product.This covers both the OmniSwitch 6250 hardware and the related Alcatel-Lucent Operating System (AOS) software.

Hardware Limited Lifetime Warranty (LLW) SupportHardware warranty is included with the OmniSwitch 6250 family. Limited to the original owner and/or the registered end user, this warranty is provided for up to five years after the product’s end-of-sales announcement.

Note: Hardware Limited Lifetime Warranty does not cover transceivers.

Software Limited Lifetime SupportLimited Software Support is included with the OmniSwitch 6250 family as part of the warranty. Limited to the original product owner and/or the registered end user, the support is provided for up to two years after the product’s end-of-sales announcement.

This service includes:

• Remote Technical support with the Alcatel-Lucent Switch Certified personnel

• Web and phone access to technical support

• Operating system software maintenance, minor and major releases

For more information about the Alcatel-Lucent OmniSwitch 6250 service and support programs, visit http://enterprise.alcatel-lucent.com/?services=EnterpriseServices&page=directory.



All OmniSwitch 6350 switches use the field-proven Alcatel-Lucent Operating System (AOS) to deliver highly available, secure, self-protective, easily managed, and eco-friendly networks.

The OmniSwitch 6350 family is embedded with the latest technology innovations and offers maximum investment protection.

The following type of deployments benefit from the OmniSwitch 6350 family:

• Small business network solutions

BENEFITS• Meets all customer configuration needs

and offers excellent investment protection and flexibility with easy deployment, operation and maintenance

• Provides outstanding performance when supporting real-time voice, data and video applications for converged scalable networks

• Ensures efficient power management, reduces operating expenses (OPEX) and lowers total cost of ownership (TCO) through low power consumption and dynamic PoE allocation, which delivers only the power needed by the attached device

• Field-upgradeable solution makes the network highly available and reduces OPEX

• Comprehensive security features for your small business network or campus edge at no additional cost

• Supports cost-effective installation and deployment with automated switch setup and configuration

FEATURES• 24-port and 48-port, PoE and non-PoE

models, with four fixed small form-factor pluggable (SFP) Gigabit uplink interfaces

• Provides up to 48 ports of PoE connectivity for simplified IP phones, wireless and IP surveillance deployments over a single Ethernet cable. All 6350 models are IEEE 802.3af as well as IEEE 802.3at PoE compliant

• Provides native IPv4 and IPv6 support for routing, Access Control Lists (ACLs) and Dynamic Host Configuration Protocol (DHCP) relay

• Advanced IPv6 threat protection (DHCP snooping, router advertisement protection and source address filter protection) providing protection against a wide range of address spoofing attacks

• Simplified Voice over IP (VoIP) deployments using the advanced Auto-Quality of Service (Auto-QoS) feature that configures the IP telephony devices into the proper virtual LAN (VLAN) with the correct QoS parameters to prioritize voice traffic

ALCATEL-LUCENTOMNISWITCH 6350 GIGABIT ETHERNET LAN SWITCH FAMILY

The Alcatel-Lucent OmniSwitch® 6350 family is a series of fixed-configuration Gigabit Ethernet switches available as 24- to 48-port, Power-over-Ethernet (PoE) and non-PoE models to create the exact network for your small business.

The network capabilities of the OmniSwitch 6350 family include advanced security, quality of service and high availability features for your business-class data, voice and wireless technologies. These switches are simple to deploy, configure and manage.

OmniSwitch 6350-24

OmniSwitch 6350-P24

OmniSwitch 6350-48

OmniSwitch 6350-P48

2

ALCATEL-LUCENT OMNISWITCH 6350ALCATEL-LUCENT ENTERPRISE DATA SHEET

MANAGEMENT• AOS field-proven software managed

through a web interface (WebView), command line interface (CLI), and Simple Network Management Protocol (SNMP)

• Supported by Alcatel-Lucent OmniVista® 2500 Network Management System (NMS)*


with Alcatel-Lucent Access Guardian (IEEE 802.1x/MAC)

• Advanced QoS and ACLs for traffic control, including an embedded denial of service (DoS) engine to filter out unwanted traffic attacks

*Future OmniVista development

DETAILED PRODUCT FEATURESManagement Configuration management interfaces

• Intuitive CLI with a familiar interface, reducing training costs

• Easy-to-use, point-and-click web-based element manager (WebView) with built-in help for easy configuration

• Integration with Alcatel-Lucent OmniVista 2500 for network management*

• Full configuration and reporting using SNMPv1/2/3 across all OmniSwitch families to facilitate third-party NMS integration

• Remote Telnet management or Secure Shell access using SSHv2


• Human-readable ASCII-based configuration files for offline editing and bulk configuration


• Local (on the Flash) and remote server logging: Syslog and command log

• Port-based mirroring for troubleshooting and lawful interception supports four sessions with multiple sources-to-one destination

• Policy-based mirroring that allows selecting the type of traffic to mirror using QoS policies

• Remote port mirroring that facilitates passing mirrored traffic through the network to a remotely connected device

• Port monitoring feature that allows capturing Ethernet packets to a file, or to an on-screen display to assist in troubleshooting

• sFlow v5 and Remote Network Monitoring (RMON) for advanced monitoring and reporting capabilities for statistics, history, alarms and events

• IP tools: Ping and trace route

• Digital Diagnostic Monitoring (DDM): Real-time diagnostics of fiber connections for early detection of optical signal deterioration

• Time Domain Reflectometry (TDR) for locating breaks or other discontinuity in copper cables


• Remote auto-configuration download

• Auto-negotiating: 10/100/1000 ports automatically configure port speed and duplex setting

• Automatic medium-dependent interface / medium-dependent interface crossover (Auto-MDI/MDI-X) configuring to transmit and receive signals to support straight-through and crossover cabling

• Protection of management sessions using radius, Terminal Access Controller Access-Control System Plus (TACACS+) and local database authentication as well as secure management sessions over Secure Sockets Layer (SSL), Secure Shell (SSH), and Simple Network Management Protocol version 3 (SNMPv3)

• Extensive support for user-oriented features, such as learned port security (LPS), port mapping, DHCP binding tables, and User Network Profile (UNP)

PERFORMANCE AND REDUNDANCY

• Advanced layer-2+ features with basic layer-3 routing for both IPv4 and IPv6

• Triple-speed (10/100/1000) user interfaces and fiber interfaces (SFPs) supporting 1000Base-X optical transceivers


• High availability redundant uplinks, hot-swappable SFPs, dual-image and configuration file support

CONVERGENCE• Enhanced VoIP and video performance

with policy-based QoS

• Support for multimedia applications with wire-rate multicast to help you prepare for the future


OMNISWITCH 6350 24- AND 48-PORT MODELS All models ship with four fixed SFP ports that operate at 1 Gb/s. All PoE and non-PoE models have a full-rack width, power-optimized, fixed-configuration chassis in a 1U form factor.

CHASSIS 10/100/1000 RJ45 PORTS

SFP GIGABIT UPLINK SFP


Non-PoE models

OS6350-24 24 4 Internal AC N/A

OS6350-48 48 4 Internal AC N/A

PoE models

OS6350-P24 24 4 Internal AC N/A

OS6430-P48 48 4 Internal AC N/A

3


• Bootstrap protocol (BOOTP)/DHCP client that allows auto-configuring switch IP information for simplified deployment



• IEEE 802.1AB Link Layer Discovery Protocol (LLDP) with Media Endpoint Device (MED) extensions for automated device discovery

• Multiple VLAN Registration Protocol (MVRP) for IEEE 802.1Q-compliant VLAN pruning and dynamic VLAN creation

• Auto-QoS for switch management traffic and traffic from Alcatel-Lucent IP phones


Resiliency and high availability • Ring Rapid Spanning Tree Protocol (RRSTP)


• IEEE 802.1s Multiple Spanning Tree Protocol: Encompasses IEEE 802.1D Spanning Tree Protocol (STP) and IEEE 802.1w Rapid Spanning Tree Protocol

• Per-VLAN spanning tree (PVST) and 1x1 STP mode

• Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) and static Link Aggregation Groups (LAGs) across modules



• Hot-swappable transceiver modules offering uninterruptable service

• Dual-image and dual-configuration file storage provide backup

Advanced security Access control

• Access Guardian framework in the AOS for comprehensive user-policy-based network access control (NAC)

• Auto-sensing IEEE 802.1X multi-client, multi-VLAN MAC-based authentication for non-802.1X hosts

• Group mobility rules and guest VLAN support

• User network profile (UNP): Simplifying NAC management and control by dynamically providing predefined policy configuration to authenticated clients (VLAN, ACL, BW)


• Centralized Remote Access Dial-In User Service (RADIUS) and Lightweight Directory Access Protocol (LDAP) user authentication


• DHCP snooping, DHCP IP spoof protection

• TACACS+ client allowing authentication, authorization and accounting with a remote TACACS+ server

• Dynamic Address Resolution Protocol (ARP) protection and ARP poisoning detection

• ACLs for filtering out unwanted traffic including DoS attacks; flow-based filtering in hardware (L1 to L4)

• Bridge Protocol Data Unit (BPDU) blocking: Automatically shutting down user ports if an STP BPDU packet is seen to prevent topology loops

• STP Root Guard: Preventing edge devices from becoming Spanning Tree Protocol root nodes

Converged networks PoE

• PoE models support Alcatel-Lucent IP phones and WLAN access points, as well as any IEEE 802.3af or IEEE 802.3at-compliant end devices


• Dynamic PoE allocation: Delivering only the amount of power needed by the powered devices (PD) up to the total power budget for most efficient power consumption

QoS

• Priority queues: Eight hardware-based queues per port for flexible QoS management

• Traffic prioritization: Flow-based QoS with internal and external (remarking) prioritization

• Bandwidth management: Flow-based bandwidth management, ingress rate limiting; egress rate shaping per port

• Queue management: Configurable scheduling algorithms, including Strict Priority Queuing (SPQ), Weighted Round Robin (WRR) and Deficit Round Robin (DRR)

• Congestion avoidance: Support for End-to-End Head-Of-Line (E2E-HOL) blocking protection

• Auto QoS for switch management traffic and traffic from Alcatel-Lucent IP phones

• Three-color marker: Single/dual rate policing with commit bandwidth (BW), excess BW and burst size

Layer-2, Layer-3 Routing and Multicast Layer-2 switching

• Up to 16,000 MACs

• Up to 4000 VLANs

• Up to 1,000 ingress rules

• Up to 128 egress rules

• Latency: < 4 µs

• Max Frame: 9,216 bytes (jumbo)

IPv4 and IPv6

• Static routing ( IPv4 and IPv6)

• Up to 8 IPv4 and 4 IPv6 interfaces

• Up to 8 IPv4 and 4 IPv6 static routes

• Up to 256 ARP entries

Multicast

• IGMPv1/v2/v3 snooping for optimized multicast traffic


• Up to 1000 multicast groups

• IP Multicast VLAN (IPMVLAN) supported

Network protocols

• DHCP relay including generic User Datagram Protocol (UDP) relay

• ARP


• DHCP relay to forward client requests to a DHCP server

• Generic UDP relay per VLAN


4



PORT OS6350-24 OS6350-P24 OS6350-48 OS6350-P48

RJ-45 10/100/1000 ports 24 24 48 48

PERFORMANCE (GIGABIT MODELS)

Switch capacity with 4xGb/s uplinks 56 Gb/s 56 Gb/s 104 Gb/s 104 Gb/s

Switch frame rate with 4xGb/s uplinks 41.67 Mp/s 41.67 Mp/s 77.38 Mp/s 77.38 Mp/s

PORT OS6350-24 OS6350-P24 OS6350-48 OS6350-P48

Gigabit SFP ports 4 4 4 4

PoE ports 0 24 0 48

DIMENSIONS OS6350-24 OS6350-P24 OS6350-48 OS6350-P48

Width 44.0 cm (17.32 in) 44.0 cm (17.32 in) 44.0 cm (17.32 in) 44.0 cm (17.32 in)

Height 4.4 cm (1.73 in) 4.4 cm (1.73 in) 4.4 cm (1.73 in) 4.4 cm (1.73 in)

Depth 23.87 cm (9.4 in) 23.87 cm (9.4 in) 23.87 cm (9.4 in) 32.3 cm (12.72 in)

Weight 4.08 kg (9.0 lb) 5.05 kg (11.0 lb) 5.44 kg (12.0 lb) 6.8 kg (15.0 lb)

OPERATING CONDITIONS OS6350-24 OS6350-P24 OS6350-48 OS6350-P48

Operating temperature 0°C to +45°C 32°F to +113°F

0°C to +45°C 32°F to +113°F

0°C to +45°C 32°F to +113°F

0°C to +45°C 32°F to +113°F

Storage temperature -40°C to +75°C -40°F to +167°F

-40°C to +75°C -40°F to +167°F

-40°C to +75°C -40°F to +167°F

-40°C to +75°C -40°F to +167°F

Humidity (operating and storage) 5% — 95% 5% — 95% 5% — 95% 5% — 95%

Fan (variable speed)* Fanless 3 fans 1 fan 4 fans

Acoustic (dB) 0 dB (A) < 40 dB (A) < 40 dB (A) < 40dB (A)

Mean Time Between Failures (MTBF) at

25°C (hours)1,250,292 421,866 774,351 448,312

System power consumption (W)** 24W 30W 50W 58W

* Acoustic levels measured with the primary power supply at room temperature

** Power consumption measured with 64-byte packets at varied traffic conditions on all ports, including the 1 Gigabit Ethernet uplinks

OMNISWITCH 6350 POWER SUPPLY SPECIFICATIONSThe OmniSwitch 6350 24/P24/48/P48 port models offer an internal supply configuration. A backup power supply option is not available on the OmniSwitch 6350 family of products.

SPECIFICATION OS6350-24 OS6350-P24 OS6350-48 OS6350-P48

Internal/external Internal Internal Internal Internal

Nominal Input voltage 90-220 V AC 90-220 V AC 90-220 V AC 90-220 V AC

Output voltage 12V DC 12V DC/54V DC 12V DC 12V DC/53V DC

Wattage 30 W 525 W 60 W 900 W

PoE power budget N/A 380 W N/A 780 W

PoE device heat dissipation (Btu) N/A 1296 N/A 2661

Power supply efficiency 85% 85% 87% 85%

5


INDICATORS System LEDs System (OK1) (chassis HW/SW status) PWR (primary power supply status) PRI (chassis primary)

Per-port LEDs




• EMI/EMC





• CE-Mark

¬ Low voltage Directive

¬ EMC Directive

¬ RoHS Directive

• EN 55022 (EMI and EMC requirement)

• EN 61000-3-3


• EN 55024: 2010 (ITE Immunity characteristics)

¬ EN 61000-4-2

¬ EN 61000-4-3

¬ EN 61000-4-4

¬ EN 61000-4-5

¬ EN 61000-4-6

¬ EN 61000-4-8

¬ EN 61000-4-11

• IEEE802.3: Hi-Pot Test (2250 V DC on all Ethernet ports)

• EN 50581: Standard for technical documentation for RoHS recast



¬ UL 60950, United States

¬ IEC 60950-1, all national deviations

¬ EN 60950-1 (Eletric/Health & Safety), all national deviations

¬ CAN/CSA-C22.2 No. 60950-1-03



¬ UL-AR, Argentina


¬ IEC 60825-1 Laser, IEC 60825-2 Laser

¬ CDRH Laser

















IETF RFCs IP Multicast





IPv6

• RFC 1981 Path MTU discovery

• RFC 1886 DNS for IPv6

• RFC 2292/2373/2374/2460/2462

• RFC 4861/2461 Neighbor discovery protocol

• RFC 4862/2462 IPv6 stateless address auto-configuration

• RFC 4443/2463/2466 ICMP v6 and MIB


• RFC 2464/2553/2893/3493/3513


• RFC 3484 Default Address Selection for IPv6

• RFC 3542/3587 IPv6 API support

• RFC 3595 Textual Conventions for IPv6 Flow Label

• RFC 4291/3315 – Dynamic Host Configuration Protocol for IPv6 (DHCPv6)



• RFC 4291/3315 – Dynamic Host Configuration Protocol for IPv6 (DHCPv6)

• RFC 4649 – Dynamic Host Configuration Protocol for IPv6 (DHCPv6) Relay agent Remote-ID option

• RFC 6105 – Router Advertisement Guard

• RFC 6221 – Lightweight DHCPv6 Relay Agent

Manageability


• RFC 959/2640 FTP

• RFC 1155/2578-2580 SMI v1 and SMI v2

• RFC 1157/2271 SNMP


• RFC 1213/2011-2013 SNMP v2 MIB





• RFC 1901-1908/3416-3418 SNMP v2c

• RFC 2096 IP MIB


• RFC 2570-2576/3411-3415 SNMP v3




• RFC 2668/3636 IEEE 802.3 MAU MIB





Security

• RFC 1321 MD5







Quality of service

• RFC 896 Congestion control


• RFC 2474/2475/2597/3168/3246 DiffServ


• RFC 2697 srTCM

• RFC 2698 trTCM

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. (August 2015)

Others


• RFC 792 ICMP

• RFC 768 UDP





• RFC 950 Sub-netting

• RFC 951 BOOTP

• RFC 1151 RDP





• RFC 1518/1519 CIDR

• RFC 1541/1542/2131/3396/3442 DHCP






• RFC 3176 sFlow

• RFC 3021 Using 31-bit prefixes



OS6350-24 Gigabit Ethernet standalone chassis in a 1U form factor with 24 10/100/1000 Base-T ports, 4 gigabit SFP ports.

OS6350-P24 Gigabit Ethernet standalone chassis in a 1U form factor with 24 10/100/1000 PoE Base-T ports, 4 gigabit SFP ports.

OS6350-48 Gigabit Ethernet standalone chassis in a 1U form factor with 48 10/100/1000 Base-T ports, 4 gigabit SFP ports.

OS6350-P48 Gigabit Ethernet standalone chassis in a 1U form factor with 48 10/100/1000 PoE Base-T ports, 4 gigabit SFP ports.


SFP-GIG-LH70 1000Base-LH transceiver with an LC interface for single mode fiber over 1550 nm wavelength. Typical reach of 70 km.

SFP-GIG-LH40 1000Base-LH transceiver with an LC interface for single mode fiber over 1310 nm wavelength. Typical reach of 40 km.

SFP-GIG-LX 1000Base-LX transceiver with an LC interface for single mode fiber over 1310 nm wavelength. Typical reach of 10 km.

SFP-GIG-SX 1000Base-SX transceiver with an LC interface for multimode fiber over 850 nm wavelength. Typical reach of 300 m.

SFP-GIG-EXTND 1000Base-SX transceiver with an LC interface for single mode fiber over 850 nm wavelength. Typical reach of 2 km.

SFP-GIG-T 1000Base-T Gigabit ethernet transceiver Supports category 5, 5E, and 6 copper cabling up to 100m. SFP supports 1000 Mbit/s ONLY on the OS6350 SFP ports.



ALCATEL-LUCENT OMNISWITCH 6450STACKABLE GIGABIT ETHERNET LAN SWITCH FAMILY

The Alcatel-Lucent OmniSwitch® 6450 Stackable Fast Ethernet and Gigabit Ethernet LAN value switch family offers versatile, 24/48-port fixed configuration switches with 10 GigE uplinks and provides upgrade paths for 10 Gigabit Ethernet (GigE) stacking, 10 GigE uplinks and metro Ethernet services.

Promoting a design optimized for flexibility, scalability, and low power consumption, the OmniSwitch 6450 is an outstanding edge solution. It uses the field-proven Alcatel-Lucent Operating System (AOS) to deliver highly available, secure, self-protective, easily managed and eco-friendly networks.

The OmniSwitch 6450 family is embedded with the latest technology innovations and offers maximum investment protection.

The following types of deployments benefit from the OmniSwitch 6450 family:• Edge of small-to-mid-sized networks

• Branch office enterprise and campus workgroups

• Residential and commercially managed service applications

• Service provider network deployments

OmniSwitch 6450-24/P24/24X/P24X/24XM

OmniSwitch 6450-48/P48/48X/P48X

OmniSwitch 6450-U24/U24S/U24X/U24SXM

BENEFITS• Meets all customer configuration needs

and offers excellent investment protection and flexibility with easy deployment, operation, and maintenance

• Provides outstanding performance when supporting real-time voice, data, and video applications for converged scalable networks

• Ensures efficient power management, reduces operating expenses (OPEX) and lowers total cost of ownership (TCO) through low power consumption and dynamic PoE allocation, which delivers only the power needed by the attached device

• Field-upgradeable solution makes the network highly available and reduces OPEX

• Fully secures the network at the edge at no additional cost

• Enterprise-wide cost reduction through hardware consolidation to achieve network segmentation and security without additional hardware installation

• Supports cost-effective installation and deployment with automated switch setup and configuration and end-to-end virtual LAN (VLAN) provisioning

• Simplifies metro Ethernet network OA&M for service providers

2


FEATURES• 24-port and 48-port, Power over Ethernet

(PoE), non-PoE, and 24-port fiber models with two fixed small form factor pluggable (SFP+) 10-G-ready interfaces (“X” models) and 10G-ready interfaces (“non-X” models)

• Scalability from 24 to 384 Fast Ethernet and gigabit ports with 16 10 GigE ports

• Optional SFP+ stacking module

• Optional 10 GigE uplink license option for “non-X” models

• Optional metro services feature license on “non-M” models for service provider deployments

• Support for IEEE 802.3af as well as IEEE 802.3at-compliant PoE

• Support for Precision Timing Protocol (PTP) through IEEE 1588v2 (“S” models only)

• Internal AC or DC -redundant power supplies

MANAGEMENT• AOS field-proven software managed

through a web interface (WebView), command line interface (CLI), and Simple Network Management Protocol (SNMP)

• Support for programmable AOS OpenFlow for the creation of specialized services.

• Ethernet operations, administration and management (OA&M) support for service configuration and monitoring

• Supported by Alcatel-Lucent OmniVista® 2500 Network Management System (NMS)

• Alcatel-Lucent 5620 Service Aware Manager (SAM) applications for service providers


with Alcatel-Lucent Access Guardian (IEEE 802.1x/MAC/captive portal) with Host Integrity Check (HIC) enforcement

• Enables deployment of comprehensive and secure bring your own device (BYoD) services in enterprise networks, such as guest management, device on-boarding, device posturing, application management, and dynamic change of authentication (CoA).

• Advanced Quality of Service (QoS) and Access Control Lists (ACLs) for traffic control, including an embedded denial of service (DoS) engine to filter out unwanted traffic attacks

• Extensive support for user-oriented features, such as learned port security (LPS), port mapping, Dynamic Host Configuration Protocol (DHCP) binding tables, and User Network Profile (UNP)

PERFORMANCE AND REDUNDANCY• Advanced layer-2+ features with basic

layer-3 routing for both IPv4 and IPv6

• Triple speed (10/100/1000) user interfaces and fiber interfaces (SFPs) supporting 100Base X or 1000Base-X optical transceivers

• 10 G uplinks with all “X” models


• High availability with virtual chassis concept, redundant stacking links, primary/secondary unit failover, hot-swappable power options and configuration rollback

CONVERGENCE• Enhanced Voice over IP (VoIP) and video

performance with policy-based QoS

• Future-ready support for multimedia applications with wire-rate multicast

• Airgroup™ Network Services for Bonjour speaking devices providing a consistent experience over wireless and wired networks



10/100/1000 RJ45 PORTS

SFP+ GIGABIT UPLINK SFP+ 10 GIGABIT UPLINK

10 GB/S SFP+ STACKING EXPANSION MODULE PORTS


Non-PoE models

OS6450-24L 24 0* 2** 2 Internal AC Internal AC/DC

OS6450-48L 24 0* 2** 2 Internal AC Internal AC/DC

OS6450-24 0 24 2** 2 Internal AC Internal AC/DC

OS6450-24X 0 24 2 2 Internal AC Internal AC/DC

OS6450-24XM 0 24 2 2 Internal AC Internal AC/DC

OS6450-48 0 48 2** 2 Internal AC Internal AC/DC

OS6450-48X 0 48 2 2 Internal AC Internal AC/DC

24/48 port models

TECHNICAL INFORMATIONAll models ship with two fixed SFP+ ports. ”X”-models uplinks operate at 10 Gb/s by default and non-X models operate at 1Gb/s by default. Operation at 10 Gb/s for non-X models requires installation of the OS6450-SW-PERF license. These models also offer a two-port expansion slot for additional gigabit uplinks or 10 Gb/s stacking modules. Both PoE and non-PoE models are full rack width, power optimized, fixed configuration chassis in a 1U form factor. Any “M” models offer metro ethernet services enabled by default and any “non-M” requires the OS6450-SW-ME for metro ethernet services to be enabled. The “S” models support IEEE 1588v2 Precision Timing Protocol (PTP) through end-to-end Transparent Clock (TC) for network-wide time-synchronized applications.

3


PoE models

OS6450-P24L 24 0* 2** 2 Internal AC Internal AC

OS6450-P48L 24 0* 2** 2 Internal AC Internal AC

OS6450-P24 0 24 2 2 Internal AC Internal AC

OS6450-P24X 0 24 2 2 Internal AC Internal AC/DC

OS6450-P48 0 48 2 2 Internal AC Internal AC

OS6450-P48X 0 48 2 2 Internal AC Internal AC/DC

CHASSIS 10/100/1000 SFP PORTS

10/100/1000 COMBO PORTS

SFP+ GIGABIT UPLINK SFP+ 10 GIGABIT UPLINK

10 GB/S SFP+ STACKING EXPANSION MODULE PORTS


Fiber models

OS6450-U24 22 2 2** 2 Internal AC Internal AC/DC

OS6450-U24S 22 2 2** 2 Internal AC Internal AC/DC

OS6450-U24X 22 2 2 2 Internal AC Internal AC/DC

OS6450-U24SXM 22 2 2 2 Internal AC Internal AC/DC

EXPANSION MODULE GIGABIT RJ45 PORTSSFP PORTS GIGABIT SFP PORTS 10 GB/S SFP+ ***

OS6450-XNI-U2 0 0 2

OS6450-GNI-U2 0 2 0

OS6450-GNI-C2 2 0 0

• Combo ports are individually configurable to be 10/100/1000Base-T or 100/1000Base-X based on SFP transceivers. • SFP ports support 100/1000 Base-X SFP transceivers.• All “X” models SFP+ ports operate at 10Gb/s by default.• All “M” models have metro ethernet services enabled by default.• “S” models only support 1588v2 Transparent Clock in non-stacking configuration.• ** Requires the OS6450-SW-PERF license to enable 10 G uplink capability.

• Expansion modules are not 1588v2 capable.• 1588v2 precision timing is disabled if expansion modules are installed.• *** Only stacking mode supported

Expansion port models

DETAILED PRODUCT FEATURES Simplified management

• Configuration management interfaces

¬ Intuitive CLI with a familiar interface, reducing training costs

¬ Easy-to-use, point-and-click web-based element manager (WebView) with built-in help for easy configuration

¬ Integration with OmniVista 2500 for network management

¬ Full configuration and reporting using SNMPv1/2/3 across all OmniSwitch families to facilitate third-party NMS integration

¬ Remote Telnet management or Secure Shell access using SSHv2

¬ File upload using USB, TFTP, FTP, SFTP, or SCP for faster configuration

¬ Human-readable ASCII-based configuration files for offline editing and bulk configuration

¬ Managed by Alcatel-Lucent 5620 Service Aware Manager

• Monitoring and troubleshooting

¬ Local (on the Flash) and remote server logging: Syslog and command log

¬ Port-based mirroring for troubleshooting and lawful interception supports four sessions with multiple sources-to-one destination

¬ Policy-based mirroring that allows selecting the type of traffic to mirror using QoS policies

¬ Remote port mirroring that facilitates passing mirrored traffic through the network to a remotely connected device

¬ Port monitoring feature that allows capturing Ethernet packets to a file, or to an on-screen display to assist in troubleshooting

¬ sFlow v5 and RMON for advanced monitoring and reporting capabilities for statistics, history, alarms, and events

¬ IP tools: Ping and trace route

¬ Digital Diagnostic Monitoring (DDM): Real-time diagnostics of fiber connections for early detection of optical signal deterioration

• All “X” models SFP+ ports operate at 10Gb/s by default.• All “M” models have metro ethernet services enabled by default.• All “P” models comply with both IEEE 802.3af/at standards.• * All “L” user port speeds are upgradable to gigabit speeds with a license upgrade.• ** Requires the OS6450-SW-PERF license to enable 10 G uplink capability.

4


¬ Time Domain Reflectometry (TDR) for locating breaks or other discontinuity in copper cables

• Network configuration

¬ Remote auto-configuration download

¬ Auto-negotiating: 10/100/1000 ports automatically configure port speed and duplex setting

¬ Auto MDI/MDIX configuring transmit and receive signals to support straight-through and crossover cabling

¬ BOOTP/DHCP client that allows auto-configuring switch IP information for simplified deployment

¬ DHCP relay for forwarding client requests to a DHCP server

¬ Alcatel-Lucent Mapping Adjacency Protocol (AMAP) for building topology maps

¬ IEEE 802.1AB Link Layer Discovery Protocol (LLDP) with MED extensions for automated device discovery

¬ Multiple VLAN Registration Protocol (MVRP) for IEEE 802.1Q-compliant VLAN pruning and dynamic VLAN creation

¬ Auto QoS for switch management traffic and traffic from Alcatel-Lucent IP phones

¬ Network Time Protocol (NTP) for network-wide time synchronization

¬ IEEE 1588v2 Precision Timing Protocol (PTP) through end-to-end Transparent Clock (TC) for network-wide time synchronized applications: (“S” models only)

¬ Stackable to eight units

Resiliency and high availability• Ring Rapid Spanning Tree (RRSTP)


• IEEE 802.1s Multiple Spanning Tree Protocol: Encompasses IEEE 802.1D STP and IEEE 802.1w Rapid Spanning Tree Protocol

• Per-VLAN spanning tree (PVST) and 1x1 STP mode

• Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) and static LAG groups across modules

• Dual-home link (DHL) support for sub-second link protection without STP

• Virtual Router Redundancy Protocol (VRRP) providing highly available routed environments



• Layer-2 port loopback detection for preventing customer loops on Ethernet access ports

• Redundant and hot-swappable power supplies; transceiver modules offering uninterruptable service

• Dual image and dual configuration file storage provide backup

Advanced security• Access control

¬ Alcatel-Lucent Access Guardian framework for comprehensive user-policy-based network access control (NAC)*

¬ Auto-sensing IEEE 802.1X multi-client, multi-VLAN MAC-based authentication for non-802.1X hosts

¬ Web-based authentication (Captive Portal): A customizable web portal residing on the switch that can be used for authenticating supplicants and non-supplicants

¬ Group mobility rules and “guest” VLAN support

¬ Host integrity check (HIC) agent on each switch acting as an HIC enforcer and facilitating endpoint device control for company policy compliance. Support for quarantine and remediation as required.

¬ Support for dynamic change of authentication (CoA) and enforcing traffic remediation or restriction for non-compliant devices

¬ User network profile (UNP): Simplifying NAC management and control by dynamically providing predefined policy configuration to authenticated clients (VLAN, ACL, BW, HIC)

¬ SSH for secure CLI session with public key infrastructure (PKI) support

¬ Centralized Remote Access Dial-In User Service (RADIUS) and LDAP user authentication

¬ Private VLAN for user traffic segregation

• Containment, monitoring and quarantine

¬ DHCP snooping, DHCP IP spoof protection

¬ Terminal Access Controller Access Control System Plus (TACACS+) client allowing authentication, authorization and accounting with a remote TACACS+ server

¬ Dynamic ARP protection and ARP poisoning detection

¬ ACLs for filtering out unwanted traffic including DoS attacks; flow-based filtering in hardware (L1 to L4)

¬ BPDU blocking: Automatically shutting down user ports if an STP BPDU packet is seen to prevent topology loops

¬ STP Root Guard: Preventing edge devices from becoming Spanning Tree Protocol root nodes

Converged networks • PoE

¬ PoE models support Alcatel-Lucent IP phones and WLAN access points, as well as any IEEE 802.3af or IEEE 802.3at-compliant end devices

¬ Configurable per-port PoE priority and max power for power allocation

¬ Dynamic PoE allocation: Delivering only the amount of power needed by the powered devices (PD) up to the total power budget for most efficient power consumption

• QoS

¬ Priority queues: Eight hardware-based queues per port for flexible QoS management

¬ Traffic prioritization: Flow-based QoS with internal and external (remarking) prioritization

¬ Bandwidth management: Flow-based bandwidth management, ingress rate limiting; egress rate shaping per port

¬ Queue management: Configurable scheduling algorithms, including Strict Priority Queuing (SPQ), Weighted Round Robin (WRR) and Deficit Round Robin (DRR)

¬ Congestion avoidance: Support for End-to-End Head-Of-Line (E2E-HOL) blocking protection

¬ Auto QoS for switch management traffic and traffic from Alcatel-Lucent IP phones

¬ Three-color marker: Single/Dual Rate policing with commit BW, excess BW and burst size

5


Layer-2/Layer-3 Routing and Multicast

• Layer-2 switching

¬ Up to 16,000 MACs

¬ Up to 4000 VLANs

¬ Up to 2000 ACLs

¬ Latency: < 4 µs

¬ Max Frame: 9216 bytes (jumbo)

• IPv4 and IPv6

¬ Static routing for IPv4 and IPv6

¬ RIP v1 and v2 for IPv4; RIPng for IPv6

¬ Up to 256 IPv4 and 128 IPv6 static and RIP routes

¬ Up to 128 IPv4 and 16 IPv6 interfaces

¬ Up to 1000 Arp entries

• Multicast

¬ IGMPv1/v2/v3 snooping for optimized multicast traffic

¬ Multicast Listener Discovery (MLD) v1/v2 snooping

¬ Up to 1000 multicast groups per stack

¬ IP Multicast VLAN (IPMVLAN) for optimized multicast replication at the edge, saving network core resources

• Network protocols

¬ DHCP relay including generic UDP relay

¬ ARP

¬ Dynamic Host Configuration Protocol (DHCP) relay

¬ DHCP relay to forward client requests to a DHCP server

¬ Generic User Datagram Protocol (UDP) relay per VLAN

¬ DHCP Option 82: Configurable relay agent information

Metro Ethernet access (features available on “M” models or with metro license upgrade)

• Ethernet services support per IEEE 802.1ad Provider Bridge

¬ Transparent LAN Services with Service VLAN (SVLAN) and Customer VLAN (CVLAN) concept


¬ Service Access Point (SAP) profile identification


• IEEE 802.1ag Ethernet OAM: Connectivity Fault Management (L2 ping and link trace)

• Ethernet OAM compliant with IEEE 802.3ah

• ITU-T G.8032 Ethernet Ring Protection designed for loop protection and fast convergence times (< 50 ms) in ring topologies

• Private VLAN for user traffic segregation

• Service Assurance Agent (SAA) for proactively measuring network health, reliability and performance. Four SAA tests including L2-MAC, IP, ETH-LB and ETH-DMM depending on network requirements

• Customer provider edge (CPE) test head traffic generator and analyzer tool used in the metro Ethernet network to validate customer Service Level Agreements (SLAs)

• IPMVLAN for optimized multicast replication at the edge, saving network core resources

• Layer-2 Multicast VLAN Replication (MVR) that allows users from different multicast VLANs to subscribe to a multicast group from an upstream trunk interface

• Three color marker: Single/Dual Rate policing with commit BW, excess BW and burst size

• TR-101 PPPoE Intermediate Agent allowing the PPPoE network access method

• MAC-Forced forwarding support according to RFC 4562

• Layer-2 Control Protocol (L2CP) for tunneling a customer’s L2CP frames, through a-well known address, on a given UNI for Ethernet Private Line (EPL) and Ethernet Virtual Private Line (EVPL) services

• Dying Gasp through SNMP and Ethernet OAM delivery

• Metro Ethernet Forum CE 2.0 certified

• Managed by Alcatel-Lucent 5620 SAM

PORT OS6450-24L OS6450-P24L OS6450-48L OS6450-P48L OS6450-U24/U24X/U24S/U24SXM

RJ-45 10/100 ports 24 24 48 48 0

PORT OS6450-24/24X/24XM

OS6450-P24/P24X

OS6450-48/48X OS6450-P48/P48X

OS6450-U24/U24X/U24S/U24SXM

RJ-45 10/100/1000 ports 24 24 48 48 0

PERFORMANCE (Gigabit models)

Switch capacity with 2x10 G ports and 2x10 G stacking

128 Gb/s 128 Gb/s 176 Gb/s 176 Gb/s 128 Gb/s

Switch frame rate with 2x10 G ports and 2x10 G stacking

95.3 Mp/s 95.3 Mp/s 131.0 Mp/s 131.0 Mp/s 95.3 Mp/s

Stacking capacity (aggregated) 40 Gb/s 40 Gb/s 40 Gb/s 40 Gb/s 40 Gb/s

PORT OS6450-24L/24/24X/24XM

OS6450-P24L/P24/P24X

OS6450-48L/48/48X

OS6450-P48L/P48/P48X

OS6450-U24/U24X/U24S/U24SXM

RJ-45/SFP 10/100/1000 combo ports 0 0 0 0 2

SFP 100/1000 ports 0 0 0 0 22

SFP+ Gigabit/10 Gigabit uplink ports 2 2 2 2 2

Ports per expansion module 2 2 2 2 2

PoE ports 0 24 0 48 0

Max 24/48-port models in a stack 8 8 8 8 8


6


DIMENSIONS OS6450-24L/24/24X/24XM

OS6450-P24L /P24/P24X

OS6450-48L /48/48X

OS6450-P48L /P48/P48X

OS6450-U24/U24X /U24S/U24SXM

Width 44.0 cm(17.32 in)

44.0 cm(17.32 in)

44.0 cm(17.32 in)

44.0 cm(17.32 in)

44.0 cm(17.32 in)

Height 4.4 cm (1.73 in) 4.4 cm (1.73 in) 4.4 cm (1.73 in) 4.4 cm (1.73 in) 4.4 cm (1.73 in)

Depth 31.24 cm(12.3 in)

31.24 cm(12.3 in)

39.1 cm(15.4 in)

39.1 cm(15.4 in)

31.24 cm(12.3 in)

Weight 4.08 kg (9.0 lb) 5.05 kg (11.0 lb) 5.44 kg (12.0 lb) 6.8 kg (15.0 lb) 4.08 kg (9.0 lb)

OPERATING CONDITIONS OS6450-24L/24/24X/24XM

OS6450-P24L /P24/P24X

OS6450-48L /48/48X

OS6450-P48L /P48/P48X

OS6450-U24/U24X /U24S/U24SXM

Operating temperature 0°C to +45°C32°F to +113°F

0°C to +45°C32°F to +113°F

0°C to +45°C32°F to +113°F

0°C to +45°C32°F to +113°F

0°C to +45°C32°F to +113°F

Storage temperature -40°C to +75°C-40°F to +167°F

-40°C to +75°C-40°F to +167°F

-40°C to +75°C-40°F to +167°F

-40°C to +75°C-40°F to +167°F

-40°C to +75°C-40°F to +167°F

Humidity (operating and storage) 5% - 95% 5% - 95% 5% - 95% 5% - 95% 5% - 95%

Fan (variable speed)* No fan 3 fans 3 fans 4 fans 2 fans

Acoustic (dB) 0 db (A) <40db (A) <40db (A) <40db (A) <40db (A)

MTBF (hours) 894,251 231,542 337,583 135,087 364,214

System power consumption (watts)**• 0% traffic

• 50% traffic

• 100% traffic

29.60W / 34.50W

30.6W / 38.70W

31.1W / 39.40W

31.4W / 31.84W

32.52W / 40.49

32.79W / 40.99W

41.7W / 47.6W

44.2W / 60.5W

45.1W / 62.3W

48.26W / 59.55W

50.64W / 76.09W

52.38W /77.23W

49.25W / 51.5W

53.37W /55.75W

56.26W / 62.9W

System heat dissipation (Btus):• 0% traffic

• 50% traffic

• 100% traffic

100.90 / 117.71

104.41 / 132.04

106.11 / 134.43

107.14 / 108.64

110.96 / 138.15

111.88 / 139.86

142.28 / 162.41

150.81 / 206.43

153.88 / 212.57

164.66 / 203.19

50.64 / 172.79

178.72 / 263.51

168.04 / 175.72

182.10 / 190.22

192 / 214.62

PoE power budget (watts) N/A 390 N/A 780 N/A

PoE device heat dissipation (BTU) N/A 1332 N/A 2663 N/A

Power supply efficiency 86.99% 88.75% 85.72% 81.25% 85.71%

* Acoustic levels measured with a single power supply at room temperature** Power consumption measured with 64-byte packets at varied traffic conditions on all ports, including the 10GE stacking module (accounting for 8 watts).

OmniSwitch 6450 backup supplies and specificationsThe OmniSwitch 6450 24/24L/48/48L/U24/U24S-port models offer a 1RU internal backup supply configuration where the redundant supply is installed in a power supply bay at the back of the unit.

The OmniSwitch 6450 P24/48-port models offer a 2RU external backup supply configuration where the redundant supply/tray combination mounts above the switch and uses a remote cable for the switch/supply connection. All parts and accessories are included with the backup supply kit.

SPECIFICATION OS6450-BP OS6450-BP-PH OS6450-BP-PX OS6450-BP-D

Style Framed Framed Framed Framed

Internal/external Internal External External Internal

Input voltage 90-220V AC 90-220V AC 90-220V AC 36-72V DC

Output voltage 12V DC 12V DC/54V DC 12V DC/54.5V DC 12V DC

Wattage 90W 530W 900W 90W

PoE power budget N/A 410W 780W N/A

Power supply efficiency 85% 85% 80% 85%

7


INDICATORS

System LEDs • System (OK) (chassis HW/SW status)

• PWR (primary power supply status)

• PRI (virtual chassis primary)

• BPS (backup power status)

• LED segment display indicates the stack ID of the unit in the stack: 1 to 8 (24/48 port models)

Per-port LEDs



• Stacking: Link/activity


• EMI/EMC





• CE-Mark

¬ Low Voltage Directive

¬ EMC Directive

¬ RoHS Directive

• EN 55022: 2010 (EMI and EMC requirement))

• EN 61000-3-3


• EN 55024 (ITE Immunity characteristics)

¬ EN 61000-4-2

¬ EN 61000-4-3

¬ EN 61000-4-4

¬ EN 61000-4-5

¬ EN 61000-4-6

¬ EN 61000-4-8

¬ EN 61000-4-11

• IEEE802.3: HiPot Test (2250 V DC on all Ethernet ports)

• EN 50581: Standard for technical documentation for RoHS recast



¬ UL 60950, United States

¬ IEC 60950-1, all national deviations

¬ EN 60950-1 (Electric/Health & Safety), all national deviations

¬ CAN/CSA-C22.2 No. 60950-1-03



¬ UL-AR, Argentina


• IEC 60825-1 Laser, IEC 60825-2 Laser

• CDRH Laser




• IEEE 802.1ad (Provider Bridge) Q-in-Q (VLAN stacking)












• IEEE 802.3ae (10 Gigabit Ethernet)



• IEEE 802.ah (Ethernet first mile)


• IEEE 1588v2 Precision Timing Protocol (PTP) (“S” models only)

¬ End-to-end Transparent Clock (TC)

¬ IPv4 Unicast address or Ethernet Multicast Encapsulation

ITU-T recommendations • ITU-T Y.1731 OA&M fault and

performance management


IETF RFCs RIP

• RFC 1058 RIP v1

• RFC 1722/1723/1724/2453 RIP v2 and MIB

• RFC 1812/2644 IPv4 Router Requirement


IP Multicast





IPv6

• RFC 1886 DNS for IPv6

• RFC 2292/2373/2374/2460/2462

• RFC 2461 NDP

• RFC 2463/2466 ICMP v6 and MIB


• RFC 2464/2553/2893/3493/3513


• RFC 3542/3587 IPv6



Manageability


• RFC 959/2640 FTP

• RFC 1155/2578-2580 SMI v1 and SMI v2

• RFC 1157/2271 SNMP


SPECIFICATION OS6450-BP OS6450-BP-PH OS6450-BP-PX OS6450-BP-D

Total RU with BPS 1 RU 2 RU 2 RU 1 RU

Supply dimension N\A 32 cm x 17.5 cm x 4.4cm (12.6 in x6.9 in x 1.73 in)

32 cm x 17.5 cm x 4.4cm(12.6 in x 6.9 in x 1.73 in)

N\A

Shelf dimension N\A 35.3 cm x 21 cm x 4.4cm (13.9 in x 8.3 in x 1.73 in)

35.3 cm x 21 cm x 4.4cm(13.9in x 8.3 in x 1.73 in)

N\A

Models supported OS6450-24L/24/24X/24XM/48L/48/48X/U24/U24X/U24S/U24SXM

OS6450-P24L/P24/P24X OS6450-P48L/P48/P48X OS6450-24L/24/24X/24XM/48L/48/48X/U24/U24X/U24S/U24SXM

8


• RFC 1213/2011-2013 SNMP v2 MIB





• RFC 1901-1908/3416-3418 SNMP v2c

• RFC 2096 IP MIB


• RFC 2570-2576/3411-3415 SNMP v3




• RFC 2668/3636 IEEE 802.3 MAU MIB





Security

• RFC 1321 MD5







Quality of service

• RFC 896 Congestion control


• RFC 2474/2475/2597/3168/3246 DiffServ


• RFC 2697 srTCM

• RFC 2698 trTCM

Other


• RFC 792 ICMP

• RFC 768 UDP





• RFC 950 Sub-netting

• RFC 951 BOOTP

• RFC 1151 RDP





• RFC 1518/1519 CIDR

• RFC 1541/1542/2131/3396/3442 DHCP






• RFC 3176 sFlow




OS6450-24L Fast Ethernet chassis in a 1U form factor with 24 10/100 Base-T ports, 2 fixed SFP+ (1G/10G*) ports and one expansion slot for optional stacking or uplink modules.

OS6450-P24L Fast Ethernet chassis in a 1U form factor with 24 PoE 10/100 Base-T ports, 2 fixed SFP+ (1G/10G*) ports and one expansion slot for optional stacking or uplink modules.

OS6450-48L Fast Ethernet chassis in a 1U form factor with 48 10/100 Base-T ports, 2 fixed SFP+ (1G/10G*) ports and one expansion slot for optional stacking or uplink modules.

OS6450-P48L Fast Ethernet chassis in a 1U form factor with 48 PoE 10/100 Base-T ports, 2 fixed SFP+ (1G/10G*) ports and one expansion slot for optional stacking or uplink modules.

OS6450-24 Gigabit Ethernet chassis in a 1U form factor with 24 10/100/1000 Base-T ports, 2 fixed SFP+ (1G/10G*) ports and one expansion slot for optional stacking or uplink modules.

OS6450-24X Gigabit Ethernet chassis in a 1U form factor with 24 10/100/1000 Base-T ports, 2 fixed SFP+ 10G ports enable by default and one expansion slot for optional stacking or uplink modules.

OS6450-24XM Gigabit Ethernet chassis in a 1U form factor with 24 10/100/1000 Base-T ports, 2 fixed SFP+ 10G ports and one expansion slot for optional stacking or uplink modules. Metro ethernet services enable by default.

OS6450-P24 Gigabit Ethernet chassis in a 1U form factor with 24 PoE 10/100/1000 Base-T ports, 2 fixed SFP+ (1G/10G*) ports and one expansion slot for optional stacking or uplink modules.

OS6450-P24X Gigabit Ethernet chassis in a 1U form factor with 24 PoE 10/100/1000 Base-T ports, 2 fixed SFP+ 10G ports enable by default and one expansion slot for optional stacking or uplink modules.

OS6450-48 Gigabit Ethernet chassis in a 1U form factor with 48 10/100/1000 Base-T ports, 2 fixed SFP+ (1G/10G*) ports and one expansion slot for optional stacking or uplink modules.

OS6450-48X Gigabit Ethernet chassis in a 1U form factor with 48 10/100/1000 Base-T ports, 2 fixed SFP+ 10G ports enable by default and one expansion slot for optional stacking or uplink modules

OS6450-P48 Gigabit Ethernet chassis in a 1U form factor with 48 PoE 10/100/1000 Base-T ports, 2 fixed SFP+ (1G/10G*) ports and one expansion slot for optional stacking or uplink modules.

OS6450-P48X Gigabit Ethernet chassis in a 1U form factor with 48 PoE 10/100/1000 Base-T ports, 2 fixed SFP+ 10G ports enable by default and one expansion slot for optional stacking or uplink modules.

9



OS6450-U24 Gigabit Ethernet chassis in a 1U form factor with 22 100/1000 Base-X SFP ports, 2 combo ports configurable to be 10/100/1000 Base-T or 100/1000 Base-X, 2 fixed SFP+ (1G/10G*) ports and one expansion slot for optional stacking or uplink modules.

OS6450-U24X Gigabit Ethernet chassis in a 1U form factor with 22 100/1000 Base-X SFP ports, 2 combo ports configurable to be 10/100/1000 Base-T or 100/1000 Base-X, 2 fixed SFP+ 10G ports enable by default and one expansion slot for optional stacking or uplink modules.

OS6450-U24S Gigabit Ethernet chassis in a 1U form factor with 22 100/1000 Base-X SFP ports, 2 combo ports configurable to be 10/100/1000 Base-T or 100/1000 Base-X, 2 fixed SFP+ (1G/10G*) ports and one expansion slot for optional stacking or uplink modules. Supports 1588v2 precision timing protocol.

OS6450-U24SXM Gigabit Ethernet chassis in a 1U form factor with 22 100/1000 Base-X SFP ports, 2 combo ports configurable to be 10/100/1000 Base-T or 100/1000 Base-X, 2 fixed SFP+ 10G ports enable by default and one expansion slot for optional stacking or uplink modules. Supports 1588v2 precision timing protocol and metro ethernet features by default.x

All models All models above contain an internal AC power supply with a country-specific power cord, user manuals access card, and hardware for mounting in a 19" rack and RJ-45 to DB-9 adapter. Ethernet SFP optical transceivers, stacking module, and cables may be ordered separately.

All of the models above support the following license options:

LICENSE OPTIONS DESCRIPTION

OS6450-SW-PERF Performance software license enabling 10 gigabit speed on the fixed SFP+ ports of the 24- or 48-port models.

OS6450-SW-ME Software license enabling the Metro Software features outlined in the Metro Ethernet Access section of this data sheet.

OS6450-24L-UPGD Software license enabling gigabit speed on the RJ-45 user ports of OS6450-24L and OS6450-P24L.

OS6450-48L-UPGD Software license enabling gigabit speed on the RJ-45 user ports of OS6450-48L and OS6450-P48L.

EXPANSION MODULE Gigabit Ethernet chassis in a 1U form factor with 24 10/100/1000 Base-T ports, 2 fixed SFP+ (1G/10G*) ports and one expansion slot for optional stacking or uplink modules.

OS6450-XNI-U2 Optional 10 Gigabit SFP+ stacking module. Supports two SFP+ 10 Gigabit ports. Inserted into the OS6450 expansion slot at the rear of the OS6450 chassis. Stacking cables may be ordered separately. Uplink mode not supported.

OS6450-GNI-U2 Optional SFP Gigabit uplink module. Supports two SFP Gigabit ports. Inserts in the OS6450 expansion slot at the rear of the OS6450 chassis. SFPs may be ordered separately.

OS6450-GNI-C2 Optional RJ-45 Gigabit uplink module. Supports two RJ-45 Gigabit ports. Inserts in the 6450 expansion slot at the rear of the OS6450 chassis.

POWER SUPPLY

OS6450-BP 90 W power AC backup power supply. Provides backup power to one non-PoE switch. Inserted into the backup power supply bay at the rear of the chassis. Ships with country-specific power cord.

OS6450-BP-PH 550 W AC backup power supply. Provides backup PoE power (390 W) to one 24-port PoE switch. Ships with a remote power connection cable, country-specific power cord, power shelf, and rack mounts for a 2RU configuration.

OS6450-BP-PX 900 W AC backup power supply. Provides backup PoE power (780 W) to one 48-port PoE switch. Ships with a remote power connection cable, country-specific power cord, power shelf, and rack mounts for a 2RU configuration.

OS6450-BP-D 90 W power DC backup power supply. Provides backup power to one non-PoE switch. Inserted into the backup power supply bay at the rear of the chassis.

CABLES

OS6450S-CBL-60 60 cm long SFP+ direct stacking cable for OS6450 24- and 48-port models

OS6450S-CBL-1M 100 cm long SFP+ direct stacking cable for OS6450 24- and 48-port models


SFP-10G-SR 10 Gigabit optical transceiver (SFP+). Supports multimode fiber over 850 nm wavelength (nominal) with an LC connector. Typical reach of 300 m.

SFP-10G-LR 10 Gigabit optical transceiver (SFP+). Supports single-mode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 10 km.

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. (January 2016)


SFP-10G-ER 10 Gigabit optical transceiver (SFP+). Supports single-mode fiber over 1550 nm wavelength (nominal) with an LC connector. Typical reach of 40 km.

SFP-10G-LRM 10 Gigabit optical transceiver (SFP+). Supports multimode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 220 m on FDDI-grade (62.5µm).

SFP-10G-GIG-SR Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850 nm wavelength (nominal) with an LC connector. Supports 1000Base-SX and 10GBase-SR speeds.

SFP-GIG-LH70 1000Base-LH transceiver with an LC interface for single-mode fiber over 1550 nm wavelength. Typical reach of 70 km.

SFP-GIG-LH40 1000Base-LH transceiver with an LC interface for single-mode fiber over 1310 nm wavelength. Typical reach of 40 km

SFP-GIG-LX 1000Base-LX transceiver with an LC interface for single-mode fiber over 1310 nm wavelength. Typical reach of 10 km.

SFP-GIG-SX 1000Base-SX transceiver with an LC interface for multimode fiber over 850 nm wavelength. Typical reach of 300 m.

SFP-DUAL-BX-D 1000Base-BX10-D transceiver with an LC-type interface for use over single-mode fiber on a single strand link up to 10 km. Operates at 100/1000 Mb speed, transmits 1500 nm and receives 1310 nm optical signal.

SFP-DUAL-BX-U 1000Base-BX10-U transceiver with an LC type interface for use over single-mode fiber on a single strand link up to 10 km. Operates at 100/1000 Mb speed, transmits 1310 nm and receives 1550 nm optical signal.

SFP-GIG-BX-D 1000Base-BX bidirectional transceiver with an LC type interface for use over single-mode fiber on a single strand link up to 10 km point to point. Transmits 1490 nm and receives 1310 nm optical signal.

SFP-GIG-BX-U 1000Base-BX bidirectional transceiver with an LC type interface for use over single-mode fiber on a single strand link up to 10 km point to point. Transmits 1310 nm and receives 1490 nm optical signal.

SFP-GIG-BX-D20 1000Base-BX bidirectional transceiver with an LC type interface for use over single-mode fiber on a single strand link up to 20 km point to point. Transmits 1490 nm and receives 1310 nm optical signal.

SFP-GIG-BX-U20 1000Base-BX bidirectional transceiver with an LC type interface for use over single-mode fiber on a single strand link up to 20 km point to point. Transmits 1310 nm and receives 1490 nm optical signal.

SFP-GIG-EXTND 1000Base-SX transceiver with an LC interface for single-mode fiber over 850 nm wavelength. Typical reach of 2 km

100 MEGABIT TRANSCEIVERS

SFP-100-MM 100Base-FX transceiver with an LC interface for multimode fiber optic cable.

SFP-100-SM15 100Base-FX transceiver with an LC type interface for single-mode fiber optic cable up to 15 km.

SFP-100-SM40 100Base-FX transceiver with an LC type interface for single-mode fiber optic cable up to 40 km.

SFP-100-BX-U 100Base-BX bidirectional transceiver with an SC type interface for use over single-mode fiber optic on a single strand link up to 20KM point-to-point, where the client (ONU) transmits 1310nm and receives 1550nm optical signal.

SFP-100-BX-D 100Base-BX bidirectional transceiver with an SC type interface for use over single-mode fiber optic on a single strand link up to 20KM point-to-point, where the client (OLT) transmits 1550nm and receives 1310nm optical signal.



ALCATEL-LUCENTOMNISWITCH 6855HARDENED LAN SWITCH

Alcatel-Lucent OmniSwitch™ 6855 Hardened LAN Switch (HLS) models are industrial grade, managed, Gigabit and 10 Gigabit Ethernet switches designed to operate reliably in harsh electrical environments and severe temperatures.

This superior, rugged hardware design, coupled with the widely deployed and field-proven Alcatel-Lucent Operating System (AOS), makes the OmniSwitch 6855 ideal for industrial and mission-critical applications that require wider operating temperature ranges, more stringent EMC/EMI requirements and an optimized feature set for high security, reliability, performance and easy management.

The target applications for these versatile LAN switches are power utilities, trans-portation and traffic control systems, industrial factory floor installations, video surveillance systems and outdoor installations, all of which require gigabit

backbone connectivity.

FEATURES BENEFITS

Ruggedized hardware design Operates at a wider temperature range from -40°C to +75°C, withstands greater shock, vibrations, temperature and EMI/EMC tests

Convection cooling for fanless models or temperature triggered fans for 24 port models

Increased reliability, and lower acoustic levels

Power over Ethernet (PoE) support on all copper models Enables converged applications by providing power to IP phones, surveillance cameras, and wireless access points

Redundancy at all levels including power supplies, software and hot-swappable. Small Form Factor Pluggable (SFP) modules

A field-upgradeable solution that makes the network highly available and reduces operating expenses

Wire-rate switching and routing at gigabit speeds. Advanced services incorporated in the operating system (OS): quality of service (QoS), access control lists (ACLs), L2/L3, VLAN stacking, and IPv6

Outstanding performance when supporting real-time voice, data, and video applications for converged scalable networks

Extensive security features for network access control (NAC), policy enforcement and attack containment

Fully secures the network at the edge, at no additional cost

Hardware-based virtual routing and forwarding (VRF) support on OmniSwitch 6855-U24X

Enterprise-wide cost reduction through hardware consolidation to achieve network segmentation and security without additional hardware installation

Advanced, out-of-the-box auto- configuration, Link Layer Discovery Protocol (LLDP) network policies and dynamic VLAN allocation

Automated switch setup and configuration, and end-to-end VLAN provisioning support cost-effective installation and deployment

Ready for Metro Ethernet access: VLAN stacking, multicast switching, Dynamic Host Configuration Protocol (DHCP) snooping/ option 82, ITU-T Y.1731, IEEE 802.1ag, IEEE 802.3ah and MAC-Forced Forwarding (MEF 9/14 compliant)

Simplifies Metro Ethernet network OA&M for service providers

2

AlcAtel-lucent OmniSwitch 6855ALCATEL-LUCENT ENTERPRISE DATA SHEET

ALCATEL-LUCENT OMNISWITCH 6855 MODELSThe OmniSwitch 6855 family offers customers an extensive selection of Gigabit and 10 Gigabit Ethernet fixed-configura-tion switches and power supply options that accommodate most needs. Models offered include industrial-strength PoE and non-PoE models in a IU form factor.

Fiber models with 10 Gigabit Ethernet OmniSwitch 6855-u10

• Eight SFP ports

• Two RJ-45 10/100/1000 copper ports

• Fanless design

OmniSwitch 6855-u24x

• Two 10 Gigabit Ethernet SFP+ ports for stacking or uplinks

• 22 SFP ports

• Two combo ports

• Up to four units in a stack

Copper models with PoE OmniSwitch 6855-14

• 12 10/100/1000 RJ-45 copper ports

• Four PoE-capable ports

• Two SFP ports

• Fanless design

OmniSwitch 6855-P14

• 12 10/100/1000 RJ-45 copper ports

• 12 PoE-capable ports

• Two SFP ports

• Fanless design

OmniSwitch 6855-24

• 20 10/100/1000 RJ-45 copper ports

• Four PoE-capable ports

• Four combo ports

• Four combo ports

All PoE models support 15.4 W per port PoE (compliant with IEEE 802.3af standard).


OS6855-P14 OS6855-14 OS6855-24 OS6855-U10 OS6855-U24X

Number of ports

Maximum 10 Gigabit Ethernet 0 0 0 0 2

Maximum 10/100/100Base-T RJ-45

12 12 24 2 2

Maximum SFP connectors 2 2 4 8 24

PoE 12 4 4 0 0

Combo 0 0 4 0 2

Physical dimensions

Width 21.6 cm (8.50 in.)

21.6 cm (8.50 in.)

43.8 cm (17.25 in.)

21.6 cm (8.50 in.)

43.8 cm (17.25 in.)

Height 4.4 cm (1.73 in.) 4.4 cm (1.73 in.) 4.4 cm (1.73 in.) 4.4 cm (1.73 in.) 4.4 cm (1.73 in.)

Depth (no PS shelf attached) 26 cm (10.25 in.) 26 cm (10.25 in.) 27.4 cm (10.78 in.) 26 cm (10.25 in.) 27.4 cm (10.78 in.)

Weight (no PS) 2.7 kg (5.96 lb.) 2.42 kg (5.28 lb.) 3.78 kg (8.34 lb.) 2.42 kg (5.28 lb.) 5.3 kg (11.68 lb.)

Weight (with one PS and tray) 3.83 (8.44 lb.) 3.55 kg (7.82 lb.) 5.35 kg (11.8 lb.) 3.55 kg (8.2 lb.) 6.87 kg (15.14 lb.)

FEATURES BENEFITS

Enhanced Unified Access features for converged campus network solutions • SIP Fluency to provision & monitor QOS treatment of SIP flows• Airgroup™ Network Services for Bonjour speaking devices• Integrated Policy with User Network Profile • Citrix VDI fluency enables differentiated services for VDI flows

Unified Access and Application fluent Networks provide resilient architecture with automated controls, enhanced security and simplified management for both wired and wireless users resulting in reduced operational complexity & lesser cost.User Network Profiles add intelligence to the network to automatically adapt as users move around the enterprise network.Integration of services enable employees to access same applications and service across wired and wireless access and thus gives a consistent, seamless user experience.

Enables deployment of advanced , secure BYOD services in enterprise networks*: • Advanced zero-touch guest management capabilities• Device on-boarding and automated 802.1x provisioning • Device posture/health check, and fingerprinting,• Application management

OS6855 offers flexible deployment options for BYOD services which does not require a forklift upgrade and protects customer investment.Automatic on-boarding and 802.1x provisioning of user devices helps in IT operation simplification and increased wired LAN security. Provides improved control and security over corporate data/applications for mixed personal and corporate environment.

* Requires ClearPass

3


Combo ports are ports individually configurable to be 10/100/1000 Base-T or 1000Base-X, which spuport SFP transceiv-ers for short, long and very long distances.

Gigabit fiber interfaces on the OmniSwitch 6855-U10 and OmniSwitch 6855-U24X models support Gigabit SFP or 100Base-X SFP optical transceivers. See the full list of supported transceivers at the end of the data sheet.

POWER SUPPLIESOmniSwitch 6855 models support redun-dant, hot-swappable AC, DC or PoE power supplies. The primary and the backup power supply units are external, allowing for easier maintenance and replacement.

There is no interruption of service when a new power supply is installed or an old one replaced.

Power supplies for OmniSwitch 6855-14, OmniSwitch 6855-P14 and OmniSwitch 6855-u10The power supplies for the half rack mod-els come in the form of a power brick in either AC or DC variant. A separate power brick provides PoE power and is available for purchase when PoE is required.

Power supplies for OmniSwitch 6855-24 and OmniSwitch 6855-U24XThe primary and the backup power supplies for the 24 port models are modular and connect to the rear of the

unit. A power shelf provided with the unit can slide into the rear of the switch and is used to hold two power supplies.

Any power supply can be remotely connected using a cable, which enables rack mounting using the mounting ears provided with the unit. This feature allows for space-sensitive installations requiring reduced depth (for example, in a wall-mounted cabinet).

Indicators

• Per-port LEDs: link/activity/PoE

• System LEDs: OK (switch HW/SW status)

• PS1/PS2: primary and/or redundant power supply status

• 7-segment LED on OS6855-U24X indicating the operational mode and stack number

POWER SUPPLY MODELS DESCRIPTION

OS6855-PSS PSU for OS6855-14 and OS6855-U10; 90 V to 240 V AC, 50 Hz to 60 Hz AC, 40 W, 12 V AC-DC

OS6855-PSS-P PSU for PoE on OS6855-14; 66 W, 48 V PoE, AC-DC

OS6855-PSS-D PSU for 6855-14 and OS6855-U10, 40 W, -48 V and 24 V input to 12 V DC-DC

OS6855-PSS-P-D PSU for PoE on OS6855-14; 66 W, -48 V input DC-DC

OS6855-PSSPH PSU for PoE on OS6855-P14; 185 W PoE, AC-DC

OS6855-PSL-C Fanless PSU for OS6855-U24X; 90 V to 240 V AC, 50 Hz to 60 Hz AC; 80 W, 12 V, AC-DC

OS6855-PSL-P PSU for OS6855-24; 90 V to 240 V AC, 50 Hz to 60 Hz AC; 160 W, 48 VC PoE, 12 V, AC-DC

OS6855-PSL-D PSU for OS6855-24 and OS6855-U24X; 80 W, -48 V/12 V DC-DC

OS6855-PSL-DL PSU for OS6855-24 and OS6855-U24X; 80 W, 24 V/12 V DC-DC

Physical dimensions Weight Depth Width Height

OS6855-PSS, OS6855-PSS-P, OS6855-PSS-D

0.65 kg (1.3 lb.) 14 cm (5.5 in.) 8.1 cm (3.2 in.) 4.1 cm (1.6 in.)

OS6855-PSS-P-D 0.5 kg (1.1 lb.) 16.6 cm (6.53 in.) 8 cm (3.15 in.) 4.4 cm (1.73 in.)

OS6855-PSSPH 1.03 kg (2.27 lb.) 11.35 cm (4.47 in.) 6.3 cm (2.48 in.) 12.52 cm (4.93 in.)

Power brick tray 0.5 kg (1.35 lb.) 19.1 cm (7.5 in.) 21.6 cm (8.5 in.) 4.4 cm (1.73 in.)

Power supply (AC, DC or PoE) 1.00 kg (2.20 lb.) 16.5 cm (6.5 in.) 16 cm (6.3 in.) 4.4 cm (1.73 in.)

Power supply tray 0.60 kg (1.32 lb.) 17.8 cm (7.0 in.) 35.3 cm (13.88 in.) 4.4 cm (1.73 inn.)

OS6855-P14 OS6855-14 OS6855-24 OS6855-U10 OS6855-U24X

Environment

Operating temperature -40°C to +70°C (-40°F to +158°F)

-40°C to +70°C (-40°F to +158°F)

-40°C to +75°C (-40°F to +167°F)

-40°C to +70°C (-40°F to +158°F)

-40°C to +70°C (-40°F to +158°F)

Storage temperature -40°C to +85°C (-40°F to +185°F)

-40°C to +85°C (-40°F to +185°F)

-40°C to +85°C (-40°F to +185°F)

-40°C to +85°C (-40°F to +185°F)

-40°C to +85°C (-40°F to +185°F)

Humidity (operating and storage) 5% to 95% 5% to 95% 5% to 95% 5% to 95% 5% to 95%

MTBF* (hours) 387,985 430,389 529,644 508,942 373,980

Fanless design Yes Yes No Yes Yes***

Acoustic (dB) at <50°C Silent Silent 33 Silent Silent

Acoustic (dB) – all fans on N/A N/A 57 N/A N/A

Power consumption**** 33.5 W 30 W 46 W 25 W 51 W

Heat dissipation** (BTU/hr) 114.3 102.4 157 85.3 174

• MTBF values calculated at 25•C (77°F) for the switch only** Sufficient spacing required for airflow and heat dissipation*** The OS6855-U24X chassis is fanless. The etxernal DC power supplies have fans.**** Power consumption was measured from the AC input power using nominal input voltage of 120 V AC and runnnig full traffic on all ports.

4


COMPLIANCE AND CERTFICATIONSCommercialEMI/EMC

• FCC CRF Title 47 Subpart B (Class A)

• VCCI (Class A)


• CE marking for European countries (Class A)

• EN 5502:2006 (Emission Standard)

• EN 61000-3-3:1995 +A2:2005

• EN 61000-3-2:2006

• EN 55024:1998 +A1:2001 +A2:2003 (Immunity Standards)

¬ EN 61000-4-2: 1995+ A1:1998 +A2:2001

¬ EN 61000-4-3:2006

¬ EN 61000-4-4:2004

¬ EN 61000-4-5:2006

¬ EN 61000-4-6:2007

¬ EN 61000-4-8:1993 +A1:2001

¬ EN 61000-4-11:2004

• IEEE802.3: Hi-pot Test (2250 V DC on all Ethernet ports)

• EN 50121-4

neBS**

• GR-63-CORE (temperature, humidity, altitude, contamination)

• GR-1089-CORE Issue 4 (section 2-3)

• GR-1089-CORE Issue 4 (section 3.2, 4-10)

Industrial• IEC 60870-2-2 (operational temperature)

• IEC 60068-2-1 (temperature type test – cold)

• IEC 60068-2-2 (temperature type test – hot)

• IEC 60721-3-1: Class 1K5 (storage temperature)

• IEC 68-2-30: 5% to 95% non-condensing humidity

• IEC 60255-21-2 (mechanical chock)

• IEC 60255-21-1 (vibration)

EMI/EMC

• EN 61131-2

• EN 61000-6-4: 2007 (emission)

• EN 61000-6-2: 2005 (immunity)

• EN 55024: 1998 (immunity)

¬ IEC 61000-4-3

¬ IEC 61000-4-12

¬ IEC 61000-4-16

¬ IEC 61000-4-17

¬ IEC 61000-4-29

• IEC 60255-5

• IEC 61850-3 (Electric Power Substations)

• IEC 62236-4:2008 – Railway applications; Electromagnetic compatibility – Part 4

• EN 50121-4: 2006 for Class A device

• IEEE 1613 (C37.90.x)

• C37.90.3 (ESD)

• C37.90.2 (Radiated RFI)

• IEEE 1613 C37.90.1 (Fast Transient)

• IEEE 1613 C37.90.1 (Oscillatory)

• IEEE 1613 C37.90 (H.V. Impulse)

• IEEE 1613 C37.90 (Dielectric Strength)

Military• MIL-STD-810F (shock and vibration)***

• MIL-STD-901D (shock)**

• MIL-STD-167-1 (vibration)**

• MIL-STD-810F**: Methods 500, 501, 502, 503, 504, 505, 506, 507, 508, 509, 510, 512, 514, 515, 516, 520, 521

• MIL-STD-461E**: CE101, CE102, CS101, CS114, CS115, CS116, RE101, RE 102, RS101, RS103

Safety agency certifications• US UL 60950


• EN 60950-1: 2001; all deviations

• CAN/CSA-C22.2 No. 60950-1-03

• NOM-019 SCFI, Mexico

• AS/NZ TS-001 and 60950:2000, Australia

• UL-AR, Argentina

• UL-GS Mark, Germany

• EN 60825-1 Laser

• EN 60825-2 Laser

• CDRH Laser

* Note: Class A with UTP cables.** Contact for availability*** All models except OS6855-P14 are MIL-810F

compliant

DETAILED PRODUCT FEATURESInterface and speedsSwitching capacity

• OS6855-U10/-U10D: 10 Gbps Full Duplex or 20 Gbps aggregate

• OS6855-14/-14D/ -P14: 14 Gbps Full Duplex or 28 Gbps aggregate

• OS6855-24/-24D/-24DL: 24Gbps Full Duplex or 48Gbps aggregate

• OS6855-U24X/-U24XD/-U24XDL: 48Gbps Full Duplex or 96Gbps aggregate

Layer 2 throughput with 64 byte packets (Mp/s)

• OS6855-U10/-U10D: 14.9 Mp/s

• OS6855-14/-14D/-P14: 20.8 Mp/s

• OS6855-24/-24D/-24DL: 35.7 Mp/s

• OS6855-U24X/-U24XD/-U24XDL: 65.5 Mp/s

Stacking capacity for OS6855-U24X

• Full duplex/aggregated: 20/40 Gbps

Layer 2 switching

• Maximum number of configured VLANs: 4K

• Maximum MAC addresses per system: 16K

• Jumbo frame support: 9216 bytes

Simplified manageabilityManagement interfaces

• Intuitive, familiar Alcatel-Lucent CLI reduces training costs

• Easy to use, point-and-click, web-based element manager (WebView) with built-in help for easy configuration

• Integrated with Alcatel-Lucent OmniVista™ products for network management

• Full configuration and reporting using SNMPv1/2/3 across all OmniSwitch families to facilitate third-party network management system integration

• Remote switch access using Telnet or Secure Shell (SSHv2)


• Human-readable ASCII-based configuration files for off-line editing, bulk configuration and out-of-the-box auto-provisioning



• Port-based mirroring for troubleshooting and lawful interception; supports four sessions with multiple sources-to-one destination

• Policy-based mirroring allows selection of the type of traffic to mirror by using QoS policies

• Remote port mirroring facilitates passing mirrored traffic through the network to a remotely connected device

• Port monitoring feature allows capture of Ethernet packets to a file to assist in troubleshooting

• sFlow v5 and RMON for advanced monitoring and reporting capabilities for statistics, history, alarms and events

• IP tools: ping and trace route

• Y.1731 and IEEE 802.1ag Ethernet operations, administration and maintenance (OA&M): Connectivity Fault Management and performance measurements (layer-2 ping and link trace)

• IEEE 802.3ah Ethernet in the First Mile (EFM) for link monitoring, remote fault detection, and loopback control (layer-1 ping)

5


• Dying Gasp support via SNMP and syslog messages:

¬ Unidirectional Link Detection (UDLD) detects and disables unidirectional links on fiber optic interfaces.

¬ Digital Diagnostic Monitoring (DDM): Real-time diagnostics of fiber connections for early detection of optical signal deterioration

¬ Link Monitoring: link flap detection and link error counts to identify bad connections and automatically make adjustments to use the links that are good

¬ Time Domain Reflectometry (TDR): used for locating break or other discontinuity in copper cables.



• Auto MDI/MDIX automatically configures transmit and receive signals to support straight- through and crossover cabling

• BOOTP/DHCP client with option 60 allows auto-configuration of the switch for simplified deployment

• DHCP v4/v6 relay to forward client requests to a DHCP server


• IEEE 802.1AB LLDP with MED extensions for automated device discovery and IP phone provisioning

• Multiple VLAN Registration Protocol (MVRP) and GARP VLAN Registration Protocol (GVRP) for 802.1Q/1ak-compliant VLAN pruning and dynamic VLAN creation

• Auto-QoS for switch management and IP phone traffic


Resiliency and high availability• ITU-T G.8032 v2 Ethernet Ring

Protection(ERP) designed for loop protection and fast convergence times (sub 50 ms) in ring topologies

• Ring Rapid Spanning Tree Protocol (RRSTP) optimized for ring topology to provide less than 100-ms convergence time

• IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) encompasses IEEE 802.1D Spanning Tree Protocol (STP) and IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

• Per-VLAN spanning tree (PVST+) and Alcatel-Lucent 1x1 STP mode

• IEEE 802.3ad Link Aggregation Control Protocol (LACP) and static LAG groups across modules

• Dual-home link support for sub-second link protection without STP

• Virtual Router Redundancy Protocol (VRRP) to provide highly available routed environments

• Bidirectional Forwarding Detection (BFD) for fast failure detection and reduced re-convergence times in a routed environment

• Broadcast, unknown unicast and multicast storm control to avoid degradation in overall system performance

• Redundant and hot-swappable power supplies, transceivers modules offering uninterruptable service

• Dual image and dual configuration file storage provides backup

• Stacking capability (OS6855- U24X only) for virtual chassis redundancy. Up to 10-km fault-tolerant remote stacking supported.

• Split Stack Protection: Auto detection and recovery of stacks splitting into sub-stacks due to multiple stacking-link or stack elements failure*

* Contact for availability


• AOS Access Guardian framework for comprehensive user-policy- based network access control (NAC)

• Autosensing 802.1X multi-client, multi-VLAN support

• MAC-based authentication for non-802.1x hosts

• Web based authentication (captive portal): A customizable web portal residing on the switch

• IEEE 802.1X and MAC-based authentication, with group mobility and “guest” VLAN support

• Host integrity check (HIC) agent on each switch makes it an HIC enforcer and facilitates endpoint device control for company policy compliance; quarantine and remediation are supported as required

• User Network Profile (UNP) simplifies NAC by dynamically providing pre-defined policy configuration to authenticated clients – VLAN, ACL, bandwidth, HIC

• SSHv2 for secure CLI session with public key infrastructure (PKI) support

• TACACS+ client allows for authentication authorization and accounting (AAA) with a remote TACACS+ server

• Centralized RADIUS and Light- weight Directory Access Protocol (LDAP) user authentication

• Microsoft Active Directory authentication snooping (Kerberos)

• Bring Your Own Device (BYOD) – Enables deployment of advanced, secure BYOD services in enterprise networks*: on-boarding of Guest, IT/non-IT issued and silent devices; Restriction/Remediation of traffic from non-compliant devices. Uses RADIUS CoA to dynamically enforce User Network Profiles based on Authentication, Profiling, Posture check of devices

* Requires ClearPass


• Support for Alcatel-Lucent OmniVista 2500 Quarantine Manager and quarantine VLAN

• Learned Port Security (LPS) or MAC address lockdown secures the network access on user or trunk ports based on MAC address


• Embedded traffic anomaly detection (TAD) monitors traffic patterns typical for worm-like viruses and either shuts down the port or reports to the management system



• ACLs to filter out unwanted traffic including denial of service (DoS) attacks; flow-based filtering in hardware (layer 1 to layer 4)

• Support of Microsoft® Network Access Protection (NAP)

• Bridge Protocol Data Unit (BPDU) blocking automatically shuts down user ports to prevent topology loops if an STP BPDU packet is seen

• STP Root Guard prevents edge devices from becoming STP root nodes

• LLDP Security mechanism for rogue device detection and restriction

Converged networksPoE

• Dynamic PoE allocation delivers only the power needed by the attached device up to the total power budget for most efficient power consumption

• PoE models support Alcatel- Lucent IP phones and WLAN access points, as well as any IEEE 802.3af-compliant end device


QoS

• Priority queues: Eight hardware- based queues per port for flexible QoS management

6


• Traffic prioritization: Flow-based QoS with internal and external prioritization (also known as re-marking)

• Bandwidth management: Flow- based bandwidth management, ingress rate limiting; egress rate shaping per port

• Queue management: Configurable scheduling algorithms: Strict Priority Queuing (SPQ), Weighted Round Robin (WRR) and Deficit Round Robin (DRR)

• Congestion avoidance: Support for End-to-End Head-of-Line (E2E-HOL) blocking prevention and flow control

• LLDP network polices for dynamic designation of VLAN-ID and layer-2/layer-3 priority for IP phones

• Auto-QoS for switch management traffic as well as traffic from Alcatel-Lucent IP phones

• Differentiated Services for Virtual Desktop Interface (VDI) flows. One-touch QOS support for Citrix VDI

Fluent network for voice, video and data

• Session Initiation Protocol (SIP) detection, session monitoring and tracking

• Provides real time conversation quality information contained in the SIP packets concerning packet loss, delay, jitter, MOS score, R-Factor in real time

• SIP profile for QOS, priority tuning for end-to-end processing

• Multicast DNS Relay: Bonjour protocol Support for wired Airgroup™

Layer-3 routing and multicastiPv4 routing

• Multiple VRF for network Segmentation and Inter-VRF route leaking

• Static routing, Routing Information Protocol (RIP) v1 and v2

• Open Shortest Path First (OSPF) v2, Border Gateway Protocol (BGP) v4


• Graceful restart extensions for OSPF and BGP

• VRRP v2


• ARP

iPv6 routing

• Static routing


• OSPF v3

• BGP v4 (with extensions to IPv6 routing)


• VRRP v3


• DHCP relay for IPv6

iPv4/iPv6 multicast

• Internet Group Management Protocol (IGMP) v1/v2/v3 snooping for optimized multicast traffic

• Protocol Independent Multicast – Sparse Mode (PIM-SM)/Protocol Independent Multicast – Dense Mode (PIM-DM)


• Multicast Listener Discovery (MLD) v1/v2 snooping for optimized multicast traffic

Metro Ethernet access

• Ethernet services support per IEEE 802.1ad Provider Bridge services (also known as Q-in-Q or VLAN stacking):

¬ Service VLAN (SVLAN) and Customer VLAN (CVLAN) transparent LAN services


¬ Service Access Point (SAP) Profile identification


• Ethernet OA&M compliant with ITU Y.1731 and IEEE 802.1ag version 8.1 for connectivity fault and performance management and IEEE 802.3ah EFM for link OA&M

• Service Assurance Agent (SAA) for SLA compliance validation

• Customer provider edge (CPE) test head traffic generator and analyzer tool used in the metro Ethernet network to validate customer Service Level Agreements (SLA)

• TR-101 PPPoE Intermediate Agent allowing for the PPPoE network access method

• MAC-Forced Forwarding support according to RFC 4562



• IP Multicast VLAN (IPMVLAN) for optimized multicast replication at the edge saving network core resources

• Optimized Ethernet access services delivery

¬ Network bandwidth protection against overload of video traffic

¬ Multicast streams isolation from multiple content providers over the same interface

• MEF 9 and 14 certified



• IEEE 802.1D (STP)



• IEEE 802.1ad (Provider Bridges)


• IEEE 802.1ak (Multiple VLAN Registration Protocol)



• IEEE 802.1X (Port-based Network Access Control)








• IEEE 802.3ae (10G Ethernet)

• IEEE 802.3af (Power over Ethernet)

ITU-T standards• ITU-T G.8032: Draft (June 2007) Ethernet

Ring Protection

• ITU-T Y.1731 OA&M fault and performance management

IETF standardsiPv4



OSPF

• RFC 1253/1850/2328 OSPF v2 and MIB

• RFC 1587/3101 OSPF NSSA Option





RiP

• RFC 1058 RIP v1

• RFC 1722/1723/1724/2453/1724 RIP v2 and MIB



BGP

• RFC 1269/1657 BGP v3 & v4 MIB


• RFC 1771-1774/2842/2918/3392 BGP v4



• RFC 1997/1998 BGP Communities Attribute

7





• RFC 2545 BGP-4 Multiprotocol Extensions for IPv6 Inter-Domain Routing


• RFC 2858 Multiprotocol Extensions for BGP-4


iP multicast

• RFC 1075 DVMRP



• RFC 2362/4601 PIM-SM


• RFC 2710 — Multicast Listener Discovery for IPv6

• RFC 2715/2932 Multicast Routing MIB

• RFC 2934 PIM MIB for IPv4

• RFC 3376 IGMPv3

• RFC 4541 Considerations for IGMP and MLD snooping• RFC 5060 Protocol Independent Multicast MIB

• RFC 5132 IP Multicast MIB


iPv6


• RFC 2292/2553/3493/3542 IPv6 Sockets

• RFC 2373/2374/3513/3587 IPv6 Addressing

• RFC 2460//2462/2464 Core IPv6

• RFC 2461 NDP

• RFC 2463/2466/4443 ICMP v6 and MIB


• RFC 2893/4213 IPv6 Transition Mechanisms


• RFC 3542/3587 IPv6

• RFC 3595 TC for Flow Label



Manageability


• RFC 959/2640 FTP

• RFC 1155/2578-2580 SMI v1 and SMI v2

• RFC 1157/2271 SNMP


• RFC 1213/2011-2013 SNMP v2 MIB





• RFC 1901-1908/3416-3418 SNMP v2c

• RFC 2096 IP MIB

• RFC 2131 DHCP server/client

• RFC 2570-2576/3411-3415 SNMP v3



• RFC 2668/3636 IEEE 802.3 MAU MIB


• RFC 3414 User based Security model

• RFC 4251 Secure Shell Protocol architecture

• RFC 4252 The Secure Shell (SSH) Authentication Protocol

• RFC 4878 OA&M Functions on Ethernet-Like Interfaces

Security

• RFC 1321 MD5





• RFC 2267 Network Ingress Filtering


• RFC 2869 RADIUS Extension

• RFC 3579 RADIUS for EAP

• RFC 3576 Dynamic Authorization Extensions to RADIUS

QoS



• RFC 2474/2475/2597/3168/3246 DiffServ

• RFC 2697 srTCM

• RFC 2698 trTCM


Others

• RFC 768 UDP


• RFC 792 ICMP



• RFC 919/922 Broadcasting internet datagram

• RFC 925/1027 Multi LAN ARP/ Proxy ARP


• RFC 951 BOOTP

• RFC 1151 RDP

• RFC 1191/1981 Path MTU Discovery




• RFC 1518/1519 CIDR

• RFC 1541/1542/2131/3396/3442 DHCP


• RFC 2131/3046/3315/4649/6221 DHCP/BOOTP Relay



• RFC 2338/3768/2787 VRRP and MIB



• RFC 3176 sFlow

• RFC 4562 MAC-Forced Forwarding

• RFC 5880, 5881, 5882 BFD

8


OMNISWITCH 6588 ORDERING

OmniSwitch 6855 models

OS6855-14, OS6855-14D

Layer-3 fixed-configuration fanless switch in a 1U form factor. It has 12 RJ-45 connectors individually configurable to 10/100/1000Base-T, four of which are PoE–capable, and two SFP ports that support various distances. An OS6855-PSS or OS6855-PSS-D power supply respectively is included in the bundle.

OS6855-P14 Layer-3 fixed-configuration fanless switch in a 1U form factor. It has 12 RJ-45 connectors individually configurable to 10/100/1000Base-T, all of which are PoE capable, and two SFP ports that support various distances. The bundle comes with system power supply (OS6855-PSS), PoE power supply (OS6855-PSSPH), power shelves, and power cord.

OS6855-U10 OS6855-U10D

Layer-3 fixed-configuration fanless switch in a 1U form factor. It has two RJ-45 connectors individually configurable to 10/100/1000Base-T, and eight SFP ports that support various distances. An OS6855-PSS or OS6855-PSS-D power supply respectively is included in the bundle.

OS6855-24, OS6855-24DL, OS6855-24D

Layer-3 fixed-configuration switch in a 1U form factor. It has 20 RJ-45 connectors individually configurable to 10/100/1000Base-T, four of which provide PoE and four combo ports. On the combo ports, either copper or fiber can be used on a one-for-one basis. An OS6855-PSL-P, OS6855-PSL-D or OS6855-PSL-DL power supply respectively is included in the bundle.

OS6855-U24X, OS6855-U24XDL, OS6855-U24XD

Layer-3 fixed-configuration switch in a 1U form factor. It has two 10G SFP+ ports, 22 SFP ports that support various distances, and two combo ports. On the combo ports, either RJ-45 connectors individually configurable to 10/100/1000Base-T, or fiber SFP can be used on a one-for-one basis. The 10G SFP+ ports can be used either as uplinks or as stacking ports. An OS6855-PSL-C, OS6855-PSL-DL or OS6855-PSL-D power supply respectively is included in the bundle.

OmniSwitch 6855 backup power supplies for OS6855-14, -P14 and –U10

OS6855-PSS OS6855-PSS power brick AC power supply. Provides only system power. Does not provide PoE. Ships with country specific power cord.

OS6855-PSS-P OS6855-PSS-P power brick AC power supply. Provides PoE only power to one OS6855-14. Ships with country specific power cord.

OS6855-PSS-D OS6855-PSS-P-D power brick 48V DC power supply. Provides PoE only power to one OS6855-14

OS6855-PSS-P-D OS6855-PSS-P-D power brick 48V DC power supply. Provides PoE only power to one OS6855-14. Up to 66 W at -40 to +45C and 42W at ambient -40 to +75C.

OS6855-PSSPH OS6855-PSSPH power brick AC power supply. Provides up to 180W of PoE only power to one OS6855-P14.

OmniSwitch 6855 backup power supplies for OS6855-24 and OS6855-U24X

OS6855-PSL-P OS6855-PSL-P modular AC backup power supply. Provides backup system and PoE power to one OS6855-24 switch.

OS6855-PSL-D OS6855-PSL-D modular -48V DC backup power supply. Provides backup system power to one 24 port 6855 switch.

OS6855-PSL-DL OS6855-PSL-DL modular 24V DC backup power supply. Provides backup system power to one 24 port 6855 switch.

OS6855-PSL-C OS6855-PSL-C fanless modular AC backup power supply. Provides backup system power to one OS6855-U24X switch.

Transceivers All optical transceivers qualified for the OmniSwitch 6855 operate at a wider operating temperature range than the corresponding commercial types.

iSFP-10G-LR 10G industrial optical transceiver (SFP+). Supports single-mode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 10 km.

iSFP-GIG-LH70 1000Base-LH industrial transceiver. Supports single-mode fiber over 1550 nm wavelength (nominal) with an LC connector. Typical reach of 70 km.

iSFP-GIG-LH40 1000Base-LH industrial transceiver Supports single-mode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 40 km.

iSFP-GIG-LX 1000Base-LX industrial transceiver Supports single-mode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 10 km.

iSFP-GIG-SX 1000Base-SX industrial transceiver. Supports multimode fiber over 850 nm wavelength (nominal) with an LC connector. Typical reach of 300 m.

iSFP-GIG-T 1000Base-T Gigabit industrial Ethernet Transceiver (SFP MSA). Supports category 5, 5E, and 6 copper cabling up to 100 m. SFP supports 10/100/1000 Mb/s and full-duplex mode.

iSFP-GIG-BX-U 1000Base-BX SFP transceiver with an LC type interface. Supports single-mode fiber on a single strand link up to 10 km. Transmits 1310 nm and receives 1490 nm optical signal.

iSFP-GIG-BX-D 1000Base-BX SFP transceiver with an LC type interface. Supports single-mode fiber on a single strand link up to 10 km. Transmits 1490 nm and receives 1310 nm optical signal.

iSFP-100-MM 100Base-FX industrial transceiver with an LC type interface. This transceiver is designed for use over multimode fiber.

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent.To view Alcatel-Lucent Enterprise trademarks visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are theproperty of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent Enterpriseassumes no responsibility for inaccuracies contained herein. Copyright © 2015 Alcatel-Lucent Enterprise. All Rights Reserved.201502050007EN (February)

OmniSwitch 6855 models

iSFP-100-SM15 100Base-FX industrial transceiver with an LC type interface. This transceiver is designed for use over single-mode fiber up to 15 km.

iSFP-100-SM40 100Base-FX industrial transceiver with an LC type interface. This transceiver is designed for use over single-mode fiber up to 40 km.

iSFP-100-BX-U 100Base-BX industrial transceiver with an SC type interface. This bidirectional transceiver is designed for use over single-mode fiber on a single strand link up to 20 km point-to-point. This transceiver is normally used in the client (ONU) and transmits 1310 nm and receives 1550 nm optical signal.

iSFP-100-BX-D 100Base-BX industrial SFP transceiver with an SC type interface. This bidirectional transceiver is designed for use over single mode fiber on a single strand link up to 20 km point-to-point. This transceiver is normally used in the central office (OLT) and transmits 1550 nm and receives 1310 nm optical signal.

SERVICE AND SUPPORTWarrantyLimited lifetime hardware warranty: Limited to the original owner, and will be provided for up to 5 years after the product’s End-of-Sales announcement.

http://enterprise.alcatel-lucent.com/

ALCATEL-LUCENT OMNISWITCH 6860STACKABLE LAN SWITCHES

The Alcatel-Lucent OmniSwitch® 6860 Stackable LAN Switches (SLS) are compact, high-density Gigabit Ethernet (GigE) and 10 GigE platforms designed for the most demanding converged networks.

OS6860-P24 OS6860E-U28 OS6860E-48

In addition to high performance and availability, the OmniSwitch 6860 offers enhanced quality of service (QoS), user authentication, deep packet inspection (DPI) and comprehensive security features to secure the network edge while accommodating user and device mobility with a high degree of integration between

the wired and wireless LAN. The enhanced models of the OmniSwitch 6860 family also supports emerging services such as application fingerprinting for network analytics and up to 60 watts of Power over Ethernet (PoE) per port, making it ready to meet the evolving business needs of enterprise networks.

These versatile LAN switches can be positioned:

• At the edge of mid- to large-sized converged enterprise networks

• At the aggregation layer

• In a small enterprise network core

• In the data center for GigE server connectivity and SDN applications

FEATURES BENEFITS

• Versatile features and models offering high-density Gigabit and 10 Gigabit interfaces

• Up to eight switches can be connected using Virtual Chassis technology to create a single chassis-like entity with up to 32 10 Gigabit uplinks and 384 Gigabit ports

• Internal, hot-swappable power supplies, front-to-back cooling providing the lowest power consumption in its class

• Advanced functions integral of the AOS: quality of service (QoS), access control lists (ACLs), Layer-2/Layer-3 switching, Virtual LAN (VLAN) stacking and IPv6.

• With the variety of interfaces and models, the OmniSwitch 6860 family meets any customer configuration need and offers excellent investment protection and flexibility.

• The OmniSwitch 6860 Virtual Chassis increases system redundancy, resiliency and high availability while simplifying deployment, operations and management of the network.

• Ensures efficient power management, thereby reducing operating expenses and lowering total cost of ownership.

• IEEE 802.3af and 802.3at compliant PoE of 30 W per port on all ports

• Support of high PoE (up tp 60 W per port) on some ports

• With its advanced PoE capabilities and high density of PoE ports, the OmniSwitch 6860 is ideal for converged campus deployments by offering deployment flexibility, simplifying the wiring and reducing the time to deploy edge devices such as VoIP phones, surveillance cameras, 802.11ac access points and emerging devices that require higher than 30 W, such as a thin virtual desktop infrastructure (VDI) client, small cells, or even a small network switch.

• Application Monitoring and Enforcement • Using the embedded DPI technology, allows OS6860 Application monitoring to discover of up to 2000 business or personal applications flowing through the network and apply QoS policy enforcement and prioritization for the discovered applications. This type of visibility can be used to optimize the performance of the network as well as apply adequate control.

2

Alcatel-Lucent OmniSwitch 6860ALCATEL-LUCENT ENTERPRISE DATA SHEET

FEATURES BENEFITS

Advanced Unified Access features for converged campus network solutions in application fluent network• Integrated Policy with dynamic User Network Profiles

• Extensive security features for network access control (NAC), policy enforcement and attack containment

• SIP Fluency to provision and monitor QoS treatment of SIP flows

• Airgroup™ Network Services for Bonjour and DLNA speaking devices

• Unified access and application fluent networks provide simplified network architecture with automated controls and enhanced security for both wired and wireless users. Offers enhanced management and security for reduced operational complexity costs.

• User network profiles add intelligence to the network to automatically adapt as users move around the corporation without compromising the security.

• With its advanced capabilities, the OmniSwitch 6860 shows outstanding performance when supporting real-time voice, data and video applications.

• Improved user experience with the integration of services that enable employees to access the same applications and service, and have consistent experience across wired and wireless.

Enables deployment of comprehensive and secure BYOD services in enterprise networks*: • Advanced guest management capabilities

• Device on-boarding and automated IEEE 802.1x provisioning

• Device posture/health check and fingerprinting

• Application management

• The OmniSwitch 6860 offers flexible deployment options and enables the network for BYoD deployments and zero-touch guest management.

• Supports dynamic change of authentication (CoA) and enforces traffic remediation or restriction for non-compliant devices.

• Provides control and increased security over corporate data/applications for the mixed personal and corporate environment for improved visibility and control for IT.

The OmniSwitch 6860 is SDN ready.

• Supporting programmable Alcatel-Lucent Operating System (AOS) RESTful APIs, OpenFlow and OpenStack allow the creation of specialized services.

• Opens the door for fast deployment of new network services that meet employees’ needs to continuously adopt new applications that support the business.

• The support of SDN reassures customers that their investment is ready for the future and enables interoperability with third-party solutions.

• Shortest path bridging (SPB-M) for bridging and routed services

• Offers a solution that fits the enterprise needs and delivers agile value-added services, while simplifying the transformation of the campus networks to meet user needs: allows for optimal link usage, fast convergence, and ease of configuration in large L2 topologies

• Multiple VLAN Registration Protocol (MVRP) and dynamic Virtual Network Profiles (VNP)

• Virtual Routing and Forwarding (VRF)

• Enterprise-wide cost reduction through hardware consolidation to achieve network segmentation and security without additional hardware installation

* requires Aruba ClearPass

ALCATEL-LUCENT OMNISWITCH 6860 MODELSThe OmniSwitch 6860 family offers customers an extensive selection of Gigabit fixed-configuration switches with up to 60 watts of PoE per port and power supply options that accommodate the most demanding requirements. The models are in a 1RU form factor and are 19-inch rack-mountable. They all have four built-in 10 Gigabit SFP+ ports that support 10 Gigabits and 1000-X, two 20 Gigabit QSFP+ ports used as Virtual Chassis connections, USB ports and console ports.

There are four basic models in the OmniSwitch 6860 family and five enhanced models. All of the OmniSwitch 6860 PoE models support PoE+, up to 30 watts of PoE on all ports; however only the enhanced models in the family support up to 60 watts of PoE on the first four ports. The enhanced models also have an Ethernet management port (EMP) port and a built-in co-processor that can be used for running Enhanced network services such as application fingerprinting and others in the future.

GIGABIT PORTS

1G/10G SFP+ PORTS

20G QSFP+ VIRTUAL CHASSIS PORTS DESCRIPTION

BASIC MODELS

OS6860-24 24 4 2 Fixed-configuration chassis in a 1U form factor with 24 10/100/1000 Base-T ports, four fixed SFP+ (1G/10G) ports and two 20G Virtual Chassis link ports

OS6860-P24 24 PoE 4 2 Fixed-configuration chassis in a 1U form factor with 24 10/100/1000 Base-T PoE ports, four fixed SFP+ (1G/10G) ports and two 20G Virtual Chassis link ports

OS6860-48 48 4 2 Fixed-configuration chassis in a 1U form factor with 48 10/100/1000 Base-T ports, four fixed SFP+ (1G/10G) ports and two 20G Virtual Chassis link ports

OS6860-P48 48 PoE 4 2 Fixed-configuration chassis in a 1U form factor with 48 10/100/1000 Base-T PoE ports, four fixed SFP+ (1G/10G) ports and two 20G Virtual Chassis link ports

3


ENHANCED MODELS

OS6860E-24 24 4 2 Fixed-configuration chassis in a 1U form factor with 24 10/100/1000 Base-T ports, four fixed SFP+ (1G/10G) ports and two 20G virtual Chassis link ports. Includes a built-in co-processor for Enhanced network services

OS6860E-P24 24 PoE 4 2 Fixed-configuration chassis in a 1U form factor with 24 10/100/1000 Base-T PoE ports, four fixed SFP+ (1G/10G) ports and two 20G Virtual Chassis link ports. Includes a built-in co-processor for Enhanced network services

GIGABIT PORTS

1G/10G SFP+ PORTS

20G QSFP+ VIRTUAL CHASSIS PORTS DESCRIPTION

BASIC MODELS (CONT’D)

OS6860E-48 48 4 2 Fixed-configuration chassis in a 1U form factor with 48 10/100/1000 Base-T ports, four fixed SFP+ (1G/10G) ports and two 20G Virtual Chassis link ports. Includes a built-in co-processor for Enhanced network services

OS6860E-P48 48 PoE 4 2 Fixed-configuration chassis in a 1U form factor with 48 10/100/1000 Base-T PoE ports, four fixed SFP+ (1G/10G) ports and two 20G Virtual Chassis link ports. Includes a built-in co-processor for Enhanced network services

OS6860E-U28 28 SFP 4 2 Fixed-configuration chassis in a 1U form factor with 28 ports supporting 1000Base-X and 100Base-FX, four fixed SFP+ (1G/10G) ports and two 20G Virtual Chassis link ports. Includes a built-in co-processor for Enhanced network services

TECHNICAL SPECIFICATIONSOMNISWITCH 6860 BASIC MODELS

PRODUCT MATRIX OS6860-24 OS6860-48 OS6860-P24 OS6860-P48

Gigabit port count 24 48 24 (PoE) 48 (PoE)

1G/10G SFP+ 4 4 4 4

20G QSFP+ VFL ports 2 2 2 2

USB port 1 1 1 1

Out-of-band EMP port 0 0 0 0

RS-232 port 1 1 1 1

Console port 1 1 1 1

Primary slide-in PSU slot 1 1 1 1

Backup slide-in PSU slot 1 1 1 1

Fans 0 0 1 1

File system flash 2 GB 2 GB 2 GB 2 GB

RAM 2 GB 2 GB 2 GB 2 GB

Max raw fabric capacity 224 Gb/s 264 Gb/s 224 Gb/s 264 Gb/s

Throughput (at 64-byte packet)

154.9 Mpps 190.6 Mpps 154.9 Mpps 190.6 Mpps

Power consumption (idle)** 35.6 W 41.7 W 61.9 W 70.8 W

Power consumption (full load)**

45.6 W 57.2 W 477 W 900 W

Heat dissipation** 121.5 BTU/h 142.3 BTU/h 211.2 BTU/h 241.6 BTU/h

MTBF with one AC power supply

408,614 h 385,181 h 133,391 h 127,594 h

Acoustic noise (dB) at 25C 45.8 45.8 42 43.5

Height 4.4 cm (1.73 in) 4.4 cm (1.73 in) 4.4 cm (1.73 in) 4.4 cm (1.73 in)

Width 44 cm (17.33 in) 44 cm (17.33 in) 44 cm (17.33 in) 44 cm (17.33 in)

Depth 35 cm (13.78 in) 35 cm (13.78 in) 35 cm (13.78 in) 35 cm (13.78 in)

Weight (chassis and fan) 4.45 kg (9.8 lb) 4.67 kg (10.3 lb) 4.58 kg (10.1 lb) 4.90 kg (10.8 lb)

Weight (fully populated)*** 5.17 kg (11.4 lb) 5.40 kg (11.9 lb) 6.03 kg (13.3 lb) 6.35 kg (14.0 lb)

4


Altitude 13,000 ft 13,000 ft 13,000 ft 13,000 ft


0°C to 45°C (32°F to 113°F)

0°C to 45°C (32°F to 113°F)

0°C to 45°C (32°F to 113°F)

Storage temperature -40°C to 85°C (-40°F to 185°F)

-40°C to 85°C (-40°F to 185°F)

-40°C to 85°C (-40°F to 185°F)

-40°C to 85°C (-40°F to 185°F)

Humidity (operating) 5% to 95% non-condensing

5% to 95% non-condensing



PRODUCT MATRIX OS6860-24 OS6860-48 OS6860-P24 OS6860-P48

Humidity (storage) 5% to 95% non-condensing




Power supplies OS6860-BPOS6860-BP-D

OS6860-BPOS6860-BP-D

OS6860-BPPH OS6860-BPPX

IEEE 802.3at PoE ports 0 0 24 48

60 W of PoE ports 0 0 0 0

Air flow Front to back Front to back Front to back Front to back

** Power consumption measured at the 120 V AC outlet. The full L2 traffic load measurement for the 24- and 48-port PoE models was done with the 600-W and 920-W PSU respectively. Heat dissipation: 1 watt ≈ 3.41214 BTU/h

*** Fully populated chassis includes two power supplies, mounting brackets and no transceivers

OMNISWITCH 6860 ENHANCED MODELS

PRODUCT MATRIX OS6860E-24 OS6860E-48 OS6860E-P24 OS6860E-P48 OS6860E-U28

Gigabit port count 24 48 24 (PoE) 48 (PoE) 28

1G/10G SFP+ 4 4 4 4 4

20G QSFP+ VFL ports 2 2 2 2 2

USB port 1 1 1 1 1

Out-of-band EMP port 1 1 1 1 1

RS-232 port 1 1 1 1 1

Console port 1 1 1 1 1

Primary slide-in PSU slot

1 1 1 1 1

Backup slide-in PSU slot

1 1 1 1 1

Fans 0 0 1 1 0

File system flash 2 GB 2 GB 2 GB 2 GB 2 GB

RAM 2 GB 2 GB 2 GB 2 GB 2 GB

Max raw fabric capacity

224 Gb/s 264 Gb/s 224 Gb/s 264 Gb/s 224 Gb/s

Throughput (at 64-byte packet)

154.9 Mpps 190.6 Mpps 154.9 Mpps 190.6 Mpps 160.9 Mpps

Power consumption (idle)**

38.9 W 44.1 W 65.0 W 72.9 W 70.1 W

Power consumption (full load)**

48.0 W 60.0 W 480 W 904 W 72.2 W

Heat dissipation (idle)**

132.7 BTU/h 150.5 BTU/h 221.8 BTU/h 248.7 BTU/h 239.2 BTU/h

MTBF with AC power supply

353,806 h 336,101 h 126,601 h 121,442 h 292,509 h

Acoustic noise (dB) at 25C

45.8 45.8 42 43.5 42.4

Height 4.4 cm (1.73 in) 4.4 cm (1.73 in) 4.4 cm (1.73 in) 4.4 cm (1.73 in) 4.4 cm (1.73 in)

Width 44 cm (17.33 in) 44 cm (17.33 in) 44 cm (17.33 in) 44 cm (17.33 in) 44 cm (17.33 in)

Depth 35 cm (13.78 in) 35 cm (13.78 in) 35 cm (13.78 in) 35 cm (13.78 in) 35 cm (13.78 in)

5


PRODUCT MATRIX OS6860E-24 OS6860E-48 OS6860E-P24 OS6860E-P48 OS6860E-U28

Weight (chassis and fan)

4.58 kg (10.1 lb) 4.81 kg (10.6 lb) 4.81 kg (10.6 lb) 5.03 kg (11.1 lb) 4.58 kg (10.1 lb)

Weight (fully populated)***

5.26 kg (11.6 lb) 5.49 kg (12.1 lb) 6.26 kg (13.8 lb) 6.49 kg (14.3 lb) 5.26 kg (11.6 lb)

Altitude 13,000 ft 13,000 ft 13,000 ft 13,000 ft 13,000 ft


0°C to 45°C (32°F to 113°F)

0°C to 45°C (32°F to 113°F)

0°C to 45°C (32°F to 113°F)

0°C to 45°C (32°F to 113°F)

Storage temperature -40°C to 85°C (-40°F to 185°F)

-40°C to 85°C (-40°F to 185°F)

-40°C to 85°C (-40°F to 185°F)

-40°C to 85°C (-40°F to 185°F)

-40°C to 85°C (-40°F to 185°F)

Humidity (operating) 5% to 95% non-condensing










Power supplies OS6860-BPOS6860-BP-D

OS6860-BPOS6860-BP-D

OS6860-BPPH OS6860-BPPX OS6860-BPOS6860-BP-D

IEEE 802.3at PoE ports

- - 24 48 -

60 W of PoE ports - - 4 4 -

Air flow Front to back Front to back Front to back Front to back Front to back

** Power consumption measured at the 120 V AC outlet. The full L2 traffic load measurement for the 24- and 48-port PoE models was done with the 600 W and 920 W PSU respectively. Heat dissipation: 1 watt ≈ 3.41214 BTU/h

*** Fully populated chassis includes two power supplies, mounting brackets and no transceivers

The OmniSwitch 6860 models are capable of supporting MacSec, Audio-Video-Bridging (AVB), and IEEE 1588 Precision Time Protocol transparent clock. The software to support these features is a future availability.

POWER SUPPLIESAll OmniSwitch 6860 models support 1+1 redundant, hot-swappable power supplies. The primary and backup power supply units are internal but removable to allow for easier maintenance and replacement. The OmniSwitch 6860 family also supports power load-sharing for PoE between the primary and backup power supplies to provide up to 1500 watts of PoE per switch. There is no interruption of service when a new power supply is installed or an existing one replaced.

PS MODELS OS6860-BP OS6860-BP-D OS6860-BPPH OS6860-BPPX

Description Modular AC power supply. Provides 160 W system power to one OS6860 non-PoE switch

Modular DC power supply. Provides 160 W system power to one OS6860 non-PoE switch

Modular 600-W AC PoE power supply. Provides system and PoE power to one 24-port PoE switch

Modular 920-W AC PoE power supply. Provides system and PoE power to one 48-port PoE switch

Dimensions (H x W x L) 3.9 cm x 5.05 cm x 18.5 cm (1.54 in x 1.99 in x7.28 in)

3.9 cm x 5.05 cm x 18.5 cm(1.54 in x 1.99 in x7.28 in)

4.0 cm x 7.3 cm x 18.5 cm(1.57 in x 2.87 in x 7.28 in)

4.0 cm x 7.3 cm x 18.5 cm(1.57 in x 2.87 in x 7.28 in)

Weight .7 kg (1.11 lb) .88 kg (1.94 lb) 1.04 kg (2 lb) 1.05 kg( 2.32 lb)

Max with 1 PSU N/A N/A 450 W of PoE 750 W of PoE

Max with 2 PSUs N/A N/A 900 W of PoE 1500 W of PoE

Input voltage/current 90 V to 136 V AC /3 A180 V to 264 VAC /1.5 A

-36 V to-72 V DC/1.8 A to 6 A

90 V to 136 V AC /8.5 A180 V to 264 V AC/4.25 A

90 V to 136 V AC/13 A180 V to 264 V AC/6.5 A

Max output power/current

150 W/12.5 A 150 W/12.5 A 600 W/11 A 920 W/16.88 A

Fans 1 1 1 1

In addition to the primary and backup power supplies, the OmniSwitch 6860 family supports the OmniSwitch Backup Power Shelf (OS-BPS).

6


PRODUCT SPECIFICATIONS AND MEASUREMENTS Per-port LEDs

• Non-PoE ports - green: link/activity

• PoE ports - amber: link/activity

System LEDs• OK1: green/yellow operational status of

the switch

• OK2: green/yellow operational status of the external CPU

• VC: green/yellow master or slave role in VC configuration

• PS: green/yellow combined status for the primary and/or backup power supplies

• BPS: green/yellow status of the power coming from the Backup Power Shelf

• GRN: power saving mode

• 7-segment LED display for Virtual Chassis ID

Scalability numbers and speeds• 24 and 48 ports: 10/100/1000, 28 ports:

100/1000Base-X with 4 x 10G SFP+ uplinks

• Wire rate at layer 2 and layer 3 on all ports

• Virtual Fabric Link (VFL) ports raw capacity: 42 Gb/s or 84 Gb/s aggregate

• Jumbo frame size: 9 216 bytes (for 1/10 Gb/s)

• Total number of MAC addresses: 48,000

• Total number of IPv4 routes: 64,000

• Number of VLANs: 4,000

Virtual Chassis• Maximum number of units in a VC: 8

• DAC cables for VC connection: 40 cm, 1m, 3m

• Remote VC connection: using QSFP-40G-SR

COMPLIANCE AND CERTIFICATIONSCommercial EMI/EMC

• FCC Part 15:2012, Subpart B, Class A

• ICES–003:2012 Issue 5, Class A

• ANSI C63.4-2009

• FCC CRF Title 47 Subpart B (Class A)

• VCCI (Class A)



• EN 55022 (EMI & EMC )

• EN 61000-3-2

• EN 61000-3-3

• EN 55024 (Immunity)

¬ EN 61000-4-2

¬ EN 61000-4-3

¬ EN 61000-4-4

¬ EN 61000-4-5

¬ EN 61000-4-6

¬ EN 61000-4-8

¬ EN 61000-4-11

• IEEE 802.3: Hi-Pot Test (2250 V DC on all Ethernet ports)


• US UL 60950-1

• IEC 60950-1 Health and Safety

• CAN/CSA-C22.2 No. 60950-1-03





• CU, EAC, Russia

• EN 60825-1 Laser

• EN 60825-2 Laser

• CDRH Laser

• IEC 60950-1/EN 60950 with all country deviations

• IEC 60950-1:2005, Second Edition

• CCC, China*

• ANATEL, Brazil*

• BSMI, Taiwan*

• KCC, Korea**Contact for availability

The OmniSwitch 6860 family is compliant with Restriction on Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE) directives.

DETAILED PRODUCT FEATURESSimplified manageability and configuration

• Intuitive CLI in a scriptable BASH environment via console, Telnet or Secure Shell (SSH) v2 over IPv4/IPv6

• Powerful WebView Graphical Web Interface via HTTP and HTTPS over IPv4/IPv6*

• Fully programmable RESTful web services interface with XML and JSON support. API enables access to CLI and individual mib objects

• Integrated with Alcatel-Lucent OmniVista® products for network management

• Full configuration and reporting using SNMPv1/2/3 to facilitate third-party network management over IPv4/IPv6

• File upload using USB, TFTP, FTP, SFTP or SCP using IPv4/IPv6


• Fully programmable OpenFlow 1.3.1 and 1.0 agent for control of native OpenFlow and hybrid ports *

• Non-volatile memory for start-up configuration


• Dynamic Host Configuration Protocol (DHCP) relay for IPv4/IPv6

• IEEE 802.1AB Link Layer Discover Protocol (LLDP) with Media Endpoint Discover (MED) extensions


• DHCPv4 and DHCPv6 server managed by Alcatel-Lucent VitalQIP® DNS/DHCP IP Address Management

• Access to the AOS console via Bluetooth provides wireless management access to the OS6860, eliminating the use of console cables*Early availability support

Monitoring and troubleshooting• Local (on the flash) and remote server

logging (Syslog): event and command logging

• IP tools: ping and trace route

• Dying Gasp support via SNMP and syslog messages

• Loopback IP address support for management per service

• Management virtual routing and forwarding (VRF) support



• sFlow v5 and Remote Monitoring (RMON)

• Unidirectional Link Detection (UDLD), Digital Diagnostic Monitoring (DDM), and Time Domain Reflectometry (TDR)

Resiliency and high availability• Unified management, control and virtual

chassis technology

• Virtual Chassis 1+N redundant supervisor manager

• Virtual Chassis In-Service Software Upgrade (ISSU)



• IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) encompasses IEEE 802.1D Spanning Tree Protocol (STP) and IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

• Per-VLAN spanning tree (PVST+) and 1x1 STP mode


7







• Split Virtual Chassis protection: Auto-detection and recovery of Virtual Chassis splitting due to one or more VFL or stack element failures


• Alcatel-Lucent Access Guardian framework for comprehensive user-policy-based NAC

• Autosensing IEEE 802.1X multi-client, multi-VLAN support


• Web based authentication (captive portal): a customizable web portal residing on the switch

• User Network Profile (UNP) simplifies NAC by dynamically providing pre-defined policy configuration to authenticated clients — VLAN, ACL, BW

• Secure Shell (SSH) with public key infrastructure (PKI) support









• Bring Your Own Device (BYoD) provides on-boarding of Guest, IT/non-IT issued and silent devices. Restriction/Remediation of traffic from non-compliant devices. Uses RADIUS CoA to dynamically enforce User Network Profiles based on Authentication, Profiling, Posture check of devices.** with Aruba ClearPass

QoS• Priority queues: Eight hardware-based

queues per port for flexible QoS management







Layer-3 routing and multicast IPv4 routing

• Multiple VRF

• Static routing




• Border Gateway Protocol (BGP) v4 with Graceful Restart

• Generic Routing Encapsulation (GRE) and IP/IP tunneling*



• Address Resolution Protocol (ARP)


• DHCPv4 server**Early availability support

IPv6 routing

• Multiple VRF


• Static routing




• Multi-Topology IS-IS*


• Graceful Restart extensions for OSPF and BGP

• Virtual Router Redundancy Protocol version 3 (VRRPv3)



• DHCPv6 server**Early availability support

IPv4/IPv6 multicast

• Internet Group Management Protocol (IGMP) v1/v2/v3 snooping

• Protocol Independent Multicast – Sparse-Mode (PIM-SM), Source Specific Multicast (PIM-SSM)

• Protocol Independent Multicast – Dense-Mode (PIM-DM), Bidirectional Protocol Independent Multicast (PIM-BiDir)




Fluent network for voice, video and data

• Session Initiation Protocol (SIP) detection, session monitoring and tracking

• Provides real-time conversation quality information contained in the SIP packets concerning packet loss, delay, jitter, MOS score, R-Factor in real time

• SIP profile for QOS, priority tuning for end-to-end processing

• Multicast DNS Relay: Bonjour protocol support for wired Airgroup

Advanced Layer-2 services• Ethernet services support using IEEE

802.1ad Provider Bridges (also known as Q-in-Q or VLAN stacking)

• Fabric virtualization services IEEE 802.1aq Shortest Path Bridging (SPB-M)

• Ethernet network-to-network interface (NNI) and user network interface (UNI)

• Service Access Point (SAP) profile identification

• Service VLAN (SVLAN) and Customer VLAN (CVLAN) support

• VLAN translation and mapping including CVLAN to SVLAN

• Port mapping


• Multicast VLAN Registration Protocol (MVRP)

• HA-VLAN for Layer 2 clusters such as MS-NLB and active-active Firewall clusters



• STP Root Guard

8



• IEEE 802.1aq Shortest Path bridging (SPB-M)



• Fully programmable OpenFlow 1.3.1 and 1.0 agent for control of native OpenFlow and hybrid ports

• OpenStack networking plug-in


• IEEE 802.1D STP

• IEEE 802.1p CoS



• IEEE 802.1ak (Multiple VLAN Registration Protocol (MVRP)

• IEEE 802.1aq Shortest Path Bridging (SPB)


• IEEE 802.3i 10BASE-T



• IEEE 802.3z Gigabit Ethernet

• IEEE 802.3ab 1000Base-T




• IEEE 802.3af Power over Ethernet

• IEEE 802.3at PoE Plus

• IEEE 802.3az Energy Efficient Ethernet (EEE)

ITU-T recommendations


IETF RFCsIPv4


• RFC 2131 Dynamic Host Configuration Protocol (DHCPv4)


OSPF





• RFC 2740/ 5340 OSPFv3 for IPv6



RIP

• RFC 1058 RIP v1

• RFC 1722/1723/2453/1724 RIP v2 and MIB



BGP

• RFC 1269/1657/4273 BGP v3 and v4 MIB


• RFC 1771-1774/2842/2918/3392/4271 BGP v4




• RFC 2042/5396 BGP New Attribute









• RFC 5492/5668/6793 BGP 4-Octet ASN

IS-IS

• RFC 1142/1195/3719/3787/5308 IS-IS v4


• RFC 5120 M-ISIS: Multi Topology IS-IS




IP Multicast


• RFC 2362/4601/5059 PIM-SM


• RFC 2710/3019/3810/MLD v2 for IPv6




• RFC 3569 Source-Specific Multicast (SSM)

• RFC 3973 Protocol Independent Multicast-Dense Mode (PIM-DM)


• RFC 4541 Considerations for IGMP and MLD Snooping Switches





IPv6



• RFC 2461 NDP






















• RFC 4308 Cryptographic Suites for IPSec

• RFC 4443/2463 ICMPv6


• RFC 4862/2462 Stateless Address Auto-configuration

• RFC 5095 Deprecation of Type 0 Routing Headers in IPv6

Manageability


• RFC 959/2640 FTP


• RFC 1155/2578-2580 SMI v1 and SMI v2

• RFC 1157/2271 SNMP


• RFC 1213/2011-2013 SNMP v2 MIB




9



• RFC 1901-1908/3416-3418 SNMP v2c

• RFC 2096 IP MIB




• RFC 2570-2576/3410-3415/3584 SNMP v3



• RFC 2668/3636 IEEE 802.3 MAU MIB




• RFC 3826 (AES) Cipher Algorithm in the SNMP User-based Security Model

• RFC 4122 A Universally Unique IDentifier (UUID) URN Namespace





• RFC 5424 The Syslog protocol


Security

• RFC 1321 MD5









QoS



• RFC 2474/2475/2597/3168/3246 DiffServ

• RFC 2697 srTCM

• RFC 2698 trTCM


Others


• RFC 792 ICMP

• RFC 768 UDP


• RFC 826 ARP




• RFC 951 BOOTP

• RFC 1151 RDP





• RFC 1518/1519 CIDR

• RFC 1541/1542/2131/3396/3442 DHCP


• RFC 2131/3046 DHCP/BootP Relay



• RFC 2338/3768/2787 VRRP and MIB

• RFC 3021 Using 31-bit Prefixes


• RFC 3176 sFlow



OMNISWITCH 6860 BASIC MODELS

OS6860-24-xx OS6860-24: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 24 RJ-45 10/100/1000 Base-T ports, four fixed SFP+ (1G/10G) ports, USB, and two 20G VFL/stacking ports. The bundle includes one AC power supply, country-specific power cord, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter

OS6860-24D OS6860-24: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 24 RJ-45 10/100/1000 Base-T ports, four fixed SFP+ (1G/10G) ports, USB, and two 20G VFL/stacking ports. The bundle includes one DC power supply, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter

OS6860-P24-xx OS6860-P24: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 24 10/100/1000 Base-T PoE ports, four fixed SFP+ (1G/10G) ports and two 20G VFL/stacking ports. The bundle includes a mid-power AC PoE power supply, country-specific power cord, user manuals access card, hardware for mounting in a 19” rack and a USB-to-USB console adapter.

OS6860-48-xx OS6860-48: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 48 RJ-45 10/100/1000 Base-T ports, 4 fixed SFP+ (1G/10G) ports, USB, and two 20G VFL/stacking ports. The bundle includes one AC power supply, country specific power cord, user manuals access card, hardware for mounting in a 19” rack and a micro-USB to USB console adapter.

OS6860-48D OS6860-48: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 48 RJ-45 10/100/1000 Base-T ports, four fixed SFP+ (1G/10G) ports, USB, and two 20G VFL/stacking ports. The bundle includes one DC power supply, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter.

OS6860-P48-xx OS6860-P48: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 48 RJ-45 10/100/1000 Base-T PoE+ ports, four fixed SFP+ (1G/10G) ports, USB, and two 20G VFL/stacking ports. The bundle includes one 920-W AC PoE power supply, country-specific power cord, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter.

10


OMNISWITCH 6860 ENHANCED MODELS

OS6860E-24-xx OS6860-24: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 24 RJ-45 10/100/1000 Base-T ports, four fixed SFP+ (1G/10G) ports, USB, and two 20G VFL/stacking ports. The bundle includes one AC power supply, country-specific power cord, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter.

OS6860E-24D OS6860-24: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 24 RJ-45 10/100/1000 Base-T ports, four fixed SFP+ (1G/10G) ports, USB, and two 20G VFL/stacking ports. The bundle includes one AC power supply, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter.

OS6860E-P24-xx OS6860E-P24: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 24 RJ-45 10/100/1000 Base-T PoE+ ports, four of them provide 60 W, four fixed SFP+ (1G/10G) ports, USB, EMP, and two 20G VFL/stacking ports. Includes a built-in co-processor for Enhanced network services. The bundle includes one 600-W AC PoE power supply, country-specific power cord, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter.

OS6860E-48-xx OS6860E-48: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 48 RJ-45 10/100/1000 Base-T ports, four fixed SFP+ (1G/10G) ports, USB, EMP, and two 20G VFL/stacking ports. Includes a built-in co-processor for Enhanced network services. The bundle includes one AC power supply, country-specific power cord, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter.

OS6860E-48D OS6860E-48: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 48 RJ-45 10/100/1000 Base-T ports, four fixed SFP+ (1G/10G) ports, USB, EMP, and two 20G VFL/stacking ports. Includes a built-in co-processor for Enhanced network services. The bundle includes one DC power supply, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter.

OS6860E-P48-xx OS6860E-P48: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 48 RJ-45 10/100/1000 Base-T PoE+ ports, four of them provide 60 W, four fixed SFP+ (1G/10G) ports, USB, EMP, and two 20G VFL/stacking ports. Includes a built-in co-processor for Enhanced network services. The bundle includes one 920-W AC PoE power supply, country-specific power cord, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter.

OS6860E-U28-xx OS6860E-U28: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 28 100/1000 Base-X SFP ports, four fixed SFP+ (1G/10G) ports, USB, EMP, and two 20G VFL/stacking ports. Includes a built-in co-processor for Enhanced network services. The bundle includes one AC power supply, country-specific power cord, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter.

OS6860E-U28D OS6860E-U28: Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 28 100/1000 Base-X SFP ports, four fixed SFP+ (1G/10G) ports, USB, EMP, and two 20G VFL/stacking ports. Includes a built-in co-processor for Enhanced network services. The bundle includes one DC power supply, user manuals access card, hardware for mounting in a 19” rack and a micro-USB-to-USB console adapter.

OMNISWITCH 6860 POWER SUPPLIES

OS6860-BP-D OS6860-BP modular 150-W DC backup power supply. Provides backup power to one non-PoE OS6860 or OS6860E switch

OS6860-BP-xx OS6860-BP modular 150-W AC backup power supply. Provides backup power to one non-PoE OS6860 or OS6860E switch

OS6860-BPPH-xx OS6860-BP-PH modular 600-W AC PoE backup power supply. Provides system and PoE backup power to one 24-port PoE OS6860 or OS6860E switch

OS6860-BPPX-xx OS6860-BP-PX modular 920-W AC PoE backup power supply. Provides system and PoE backup power to one 48-port PoE OS6860 or OS6860E switch

OMNISWITCH 6860 SOFTWARE

OS6860-SW-AR OS6860-SW-AR: Advanced routing software license. Includes support for VRF, IPv4 routing protocols BGP, OSPFv2, PIMSM/DM, DVMRP. Includes IPv6 Routing, RIPng, OSPFv3, as well as SPB-M

OMNISWITCH 6860 ACCESSORIES

OS6860-CBL-40 OS6860 20 Gigabit direct attached copper cable (40 cm, QSFP+) for Virtual Chassis connections

OS6860-CBL-100 OS6860 20 Gigabit direct attached copper cable (1m, QSFP+) for Virtual Chassis connections

OS6860-CBL-300 OS6860 20 Gigabit direct attached copper cable (3m, QSFP+) for Virtual Chassis connections

QSFP-40G-AOC20M 40 Gigabit QSFP+ direct attached active optical cable. 20 m for Virtual Chassis connections

QSFP-40G-SR Four channel 40 Gigabit QSFP+. Supports link lengths of up to 100m for Virtual Chassis connections

10G TRANSCEIVERS

SFP-GIG-T 1000Base-T Gigabit Ethernet Transceiver (SFP MSA). SFP works at 1000 Mb/s speed and full-duplex mode

SFP-GIG-SX 1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA)

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. (September 2015)

10G TRANSCEIVERS

SFP-GIG-LX 1000Base-LX Gigabit Ethernet optical transceiver (SFP MSA)

SFP-GIG-LH40 1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Typical reach of 40 km on 9/125 µm SMF

SFP-GIG-LH70 1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Typical reach of 70 km on 9/125 µm SMF

SFP-10G-SR 10 Gigabit optical transceiver (SFP+). Supports multimode fiber over 850 nm wavelength (nominal) with an LC connector. Typical reach of 300 m

SFP-10G-LR 10 Gigabit optical transceiver (SFP+). Supports monomode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 10 km

SFP-10G-ZR 10 Gigabit optical transceiver (SFP+). Supports data transmission at 1550 nm over up to 80km single mode fiber. LC connector type.

SFP-10G-ER 10 Gigabit optical transceiver (SFP+). Supports monomode fiber over 1550 nm wavelength (nominal) with an LC connector. Typical reach of 40 km

SFP-10G-LRM 10 Gigabit optical transceiver (SFP+). Supports multimode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 220 m on FDDI-grade (62.5 µm)

SFP-10G-GIG-SR Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850 nm wavelength (nominal) with an LC connector. Supports 1000Base-SX and 10GBase-SR

SFP-10G-GIG-LR Dual-speed SFP+ optical transceiver. Supports monomode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 10 Km. Supports 1000BASE-LX and 10GBASE-LR


SFP-10G-C1M 10 Gigabit direct attached copper cable (1 m, SFP+)



Please replace the “-xx” in the part number with the country-specific power cord (e.g. OS6860-24-US will come with a power cord for the USA, -UK for United Kingdom). We offer 11 different power cord options. Please consult with the price list for the official power cord options offered.

WARRANTY The OmniSwitch 6860 family comes with a Limited Lifetime Warranty.

SERVICES AND SUPPORTFor more information about our Professional services, Support services, and Managed services, please go to http://enterprise.alcatel-lucent.com/?services=EnterpriseServices&page=directory.



http://enterprise.alcatel-lucent.com/?services=EnterpriseServices&page=directory

ALCATEL-LUCENT OMNISWITCH 6900 STACKABLE LAN SWITCHES

The Alcatel-Lucent OmniSwitch® 6900 Stackable LAN and data center switches are compact, high-density 10 Gb Ethernet (GigE) and 40 GigE platforms. In addition to high performance and extremely low latency, they offer Virtual Extensible LAN (VXLAN), OpenFlow, Shortest Path Bridging (SPB), and data center bridging (DCB) capabilities, QoS, Layer-2 and Layer-3 switching, as well as system and network level resiliency. They are designed for the most demanding software-defined operations in virtualized or physical networks and converged data centers.

With their modular approach, the OmniSwitch 6900s support lossless configurations and native Fibre Channel (FC) ports for high-speed storage I/O consolidation. They can be positioned as converged top-of-rack or spine switches in data center environments, or as core and aggregation devices in campus networks.

The OmniSwitch 6900 product family offers a broad range of 1/10 GigE and 40 GigE port density in a 1-RU form factor. The switches offer the highest 10 GigE port density in their class, with up to 104 x 10 GigE ports, up to 32 x 40 GigE and up to 24 x 2/4/8 Gigabit Fibre Channel (GFC) ports in a 1 RU form factor. Its modularity also allows for many combinations to address any to any switching between Ethernet, Converged Ethernet and FC ports. The OmniSwitch 6900 product family leverages an energy-efficient model with leading low power consumption, making them the most efficient and versatile switches in their class.

FEATURES BENEFITS

Wire-rate non-blocking switching and routing performance for Ethernet at 40 GigE, 10 GigE 1 GigE and 100Base-T speeds and for FC at 2/4/8 GFC. High port density in 1RU.• Up to 72 SFP+ or 48 SFP+ and 6 40GigE/FCoE ports for the OmniSwitch 6900-X72• Up to 104 Small Form-factor Pluggable (SFP+)/32 40 GigE/FCoE ports for OmniSwitch 6900-Q32• Up to 28 10GBase-T/FCoE ports for OmniSwitch 6900-T20• Up to 32 SFP+/FCoE ports for OmniSwitch 6900-X20• Up to 56 10GBase-T/FCoE ports for OmniSwitch 6900-T40• Up to 64 SFP+/FCoE ports for OmniSwitch 6900-X40• Up to 6x 40 GigE or 24x 8GFC ports for OmniSwitch 6900-X40/T40 • Up to 3x 40 GigE or 12x 8GFC ports for OmniSwitch 6900-X20/T20

• Up to 2.56 Tb/s of wire-rate capacity, sub-microsecond latency for high-performance server clusters and core connectivity over QSFP, SFP+, DAC or CAT 5/6. • Outstanding performance when supporting real-time voice, data, storage and video applications for converged scalable networks• Supports next-generation service with a very high port density in a 1U form factor.• Modular slots offer versatility in terms of 40 GigE, 1/10 GigE, 10G base-T and FC ports. • FC ports are available for OS6900-X20, OS6900-X40, OS6900-T20 and OS6900-T40 using the OS-XNI-U12E module.

• Resilient hardware system architecture. • Internal, hot-swappable power supplies and fans.• Front-to-back and back-to-front cooling options provide lowest power consumption per 10 GigE port in its class.

• Resiliency maximizes uptime for converged mission-critical networks. • Ensures efficient power management, thereby reducing operating expenses and lowering total cost of ownership.

OmniSwitch 6900-X72OmniSwitch 6900-Q32 Back OmniSwitch 6900-Q32 Front

OmniSwitch 6900-X20 w/OS-XNI-U12 OmniSwitch 6900-X40 w/OS-XNI-U4

OmniSwitch 6900-T40 Back w/OS-XNI-T8 OmniSwitch 6900-T20 Back

2


FEATURES BENEFITS

• Integral operating system advances functions: quality of service (QoS), access control lists (ACLs), Layer-2/Layer-3 switching, Virtual LAN (VLAN) stacking and IPv6. • High-availability hardware Virtual Extensible LAN (VXLAN) Virtual Tunnel End Point (VTEP) gateway for network virtualization supported in OS6900-Q32 and OS6900-X72. • VXLAN snooping for dynamic real-time multi-tenant visibility and SLA policy enforcement• Integrated overlay (VXLAN) and underlay internetworking automated with OpenStack neutron plug-in• Intelligent policy control through OpenFlow 1.3.1/1.0.• Hardware virtual routing and forwarding (VRF) support for VRF-lite and IP Virtual Private Network (IP VPN)

• The switch architecture simplifies the deployment of converged storage for FC, Fibre Channel over Ethernet (FCoE), Internet Small Computer System Interface (iSCSI) and Network-Attached Storage (NAS) systems.• Embedded Software-defined networking (SDN) integration to control virtual network profiles and policy management.• VXLAN VTEP allows overlay to underlay bridging and data center interconnecting.• Built-in dynamic and automated policy enforcement• Policy enforcement engine fully open for external control through RESTful northbound APIs for automation and integration of innovative applications• Native and overlay Cloud Multi-tenancy support

• Scalable network virtualization architecture with guaranteed SLA delivery over standard Ethernet fabric: auto-Fabric IP routing for routed backbone and access provisioning, SPB for bridging and routed services, Edge Virtual Bridging (EVB), Multiple VLAN Registration Protocol (MVRP) and dynamic Virtual Network Profiles (VNP). • Zero-touch provisioning and network automation with out-of-the-box plug-and-play Auto-Fabric for automatic protocol and topology discovery. Protocol auto-discovery and self-provisioning works with any Ethernet device that supports standard IEEE protocols, such as 802.1aq (Shortest Path Bridging-MAC, SPBM), 802.1ak (MVRP), or 802.3ad/802.1AX (Link Aggregation Control Protocol, LACP). Auto-fabric operation extends to IP routing protocol provisioning and IP on-boarding

• Out-of-the-box flexible fabric architecture designed to automate and simplify the end-to-end deployment of campus, data center, and cloud-based services. • Prevent human mistakes by automating standardized and replicable configurations.• Prevents host address explosion and flooding with built-in SLA service support at low capital and operating costs and based on interoperable proven standards. • Optimizes/simplifies Layer 2 and Layer 3 network designs and reduces administration overhead while increasing network capacity with resilient multipath active-active dual homing multi-chassis support. • Out-of-the-box auto-fabric to simplify installation and service provisioning.• Automated Cloud Multi-Tenancy support through vNP.

• Virtualized management, control and programmability• Unified virtual chassis with support for up to 6 switches.• Flexible and programmable Layer 2, Layer 3, ACL, QoS network virtualization function abstracted into a single virtual routing and bridging instance• Network management virtualization• Distributed Address Resolution Protocol (ARP) hardware learning for scalability

• The OmniSwitch 6900 virtual chassis increases system redundancy and resiliency, providing maximum uptime and high availability in the network. • Provides interoperability, investment protection, and flexibility• Supports pod/mesh and Spine Leaf architectures for flexible deployment. • Virtual chassis topology is flexible to accommodate any architecture that is needed to meet the desired latency and oversubscription requirements.

• Comprehensive northbound RESTful API to the entire Alcatel-Lucent operating system (AOS) feature set.• API offers access to all AOS CLI commands and all MIB structures• AOS-embedded scripting capabilities supporting Python and Bash programming.

• The RESTful interface exposes the entire AOS feature set as a programmable data structure. The API allows external controllers and applications to control and manage the switch’s data plane and monitor its counters, statistics and events for the automation of the network.

• N_Port ID virtualization (NPIV) FCoE to FC forwarder gateway supported using the OS-XNI-U12E module.• FC to FCoE gateway• FC tunneling over FCoE• FC inter-switch link (ISL) tunneling, F-port virtualization• FCoE Initialization Protocol (FIP) snooping• Compliant with multi-hop Fibre Channel over Ethernet (FCoE) transit switching based on T11-BB-5 and T11-BB-6.• Flexible multi-queue IEEE DCB support for FCoE, iSCI and configurable storage protocol TLV definitions for lossless Ethernet control.• Multiple FCoE VLANs and other storage VLANs supported in the same port with different lossless properties

• Enables the administrator to have a hands-off operation using application-based dynamic Lossless configuration through Enhanced Transmission Selection (ETS) or manually engineered lossless tuned to the application needs. Reduces data center operating costs by simplifying the convergence of high-performance storage I/O and mission-critical data into a single multipath infrastructure.• Simplifies the expansion of FC to FCoE while protecting the existing investment in FC infrastructure. Allows unified storage attachments for FC, FCoE, iSCSI and NAS. • Multi-queue IEEE DCB extends the lossless capability beyond FCoE to any traffic class in any Class of Service (CoS) queue and for many queues simultaneously in the same port. Lossless operation is supported in multiple queues per port for multiples storage technologies simultaneously.

3


FEATURES BENEFITS

• VMware-certified Alcatel-Lucent OmniVista® 2500 Virtual Machine Manager (VMM), Virtual Network Profiles (VNP) integration, VM SLA monitoring and application fingerprinting for unmanned network operation and self-adjusting SLA for application delivery• Interfaces with VMware vCenter® and Citrix™ XenServer® for discovery and inventory• VMware vCenter integration• Single pane-of-glass for end-to-end physical and virtual networks infrastructure operations• Real time tracking between VM and its network location• Dynamic VM performance for application performance analytics and visibility

• Unifies physical and virtual infrastructures by providing network operators with a comprehensive end-to-end network view for VM inventory, VM performance, location tracking, event and log auditing and provisioning operations. Monitors applications and malware activity, adjusting the network to meet the application SLAs according to the business operational requirements. This enables error-free network administration operations and simplifies the deployment of new value-added services.• Dynamic application profiling with in-line application recognition based on signatures and auto-adjustment of the network security and QoS treatment. Maintains the VM performance measurement of latency, throughput and jitter in the data center.• VM to underlay network correlation and single pane visibility

Alcatel-Lucent OmniSwitch 6900 modelsThe Alcatel-Lucent OmniSwitch 6900 family offers high-performance and very low-latency Layer 2/Layer 3 10/40 GigE switches. All models are 1RU form factor with redundant power supplies and fan trays for front-to-back and back-to-front airflow. A wide range of Ethernet and Fibre Channel interfaces are supported. Available interfaces include 40 GigE, 1/10 GigE, 1/10GBase-T, 100Base-T, and 2/4/8GigFC in the base switch or using optional modules. OmniSwitch 6900 allows for maximum flexibility and invest-ment protection as customers migrate to 10 GigE and 40 GigE.

• The OmniSwitch 6900-X72 has 48 fixed 1/10 GigE SFP+ ports auto-negotiable 1/10 GigE and six 40 GigE QSFP ports that operate at 40 GigE or 4x10 GigE. Maximum 10G port density is 72 10G ports.

• OmniSwitch 6900-Q32 has 32 fixed Quad Small Form-factor Pluggable (QSFP) ports in the front panel. The ports can be fiber or copper operating at 40 GigE or 4x10 GigE using splitters cables. Maximum 10G port density is 104 ports.

• OmniSwitch 6900-T40 has 40 fixed 10 GBASE-T ports auto-negotiable 100Base-T, 1/10 GigE and two expansion slots, one on the front panel and one on the back of the device

• OmniSwitch 6900-T20 has 20 fixed 10 GBASE-T ports auto-negotiable 100Base-T, 1/10 GigE and one expansion slot on the front panel.

• OmniSwitch 6900-X40 has 40 fixed SFP+ ports 1/10 GigE depending on transceiver and two expansion slots, one on the front panel and one on the back of the device.

• OmniSwitch 6900-X20 has 20 fixed SFP+ ports 1/10 GigE depending on transceiver and one expansion slot on the front panel.

DETAILED PRODUCT FEATURESSimplified manageability

• Fully programmable RESTful web services interface with XML and JSON support. The API enables access to Command Line Interface (CLI) and individual management information base (MIB)objects.

• Intuitive Alcatel-Lucent Enterprise CLI in a scriptable Python and Bash environment through console, Telnet or Secure Shell (SSH) v2 over IPv4/IPv6

• Powerful Alcatel-Lucent Enterprise WebView Graphical Web Interface through HTTP and HTTPS over IPv4/IPv6

• Full configuration and reporting using Simple Network Management Protocol (SNMP) v1/2/3 to facilitate third-party network management over IPv4/IPv6

• File upload using USB, Trivial File Transfer Protocol (TFTP), FTP, SFTP or secure copy (SCP) over IPv4/IPv6


• Local (on the flash) and remote server logging (Syslog) for events and commands

• Loopback IP address support for management-per-service

• Management VRF support



• sFlow v5 and Remote Network Monitoring (RMON)

• Unidirectional Link Detection (UDLD) and Digital Diagnostic Monitoring (DDM)


• IEEE 802.1AB LLDP with MED extensions


• DHCPv4 and DHCPv6 server managed by Alcatel-Lucent VitalQIP® DNS/DHCP IP Management Software

Resiliency and high availability• Unified management, control and fabric-

mesh virtual chassis technology

• Virtual chassis 1+N redundant supervisor manager

• Virtual chassis In-Service Software Upgrade (ISSU)



• IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), IEEE 802.1D Spanning Tree Protocol (STP) and IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

• Per-VLAN spanning tree (PVST+) and Alcatel-Lucent 1x1 STP mode






• Redundant fans

• Hot-swappable fan tray

• Hot-swappable expansion modules



• IEEE 802.1Qbg Edge Virtual Bridging (EVB)

• IEEE 802.1Qbb Priority Flow Control (PFC)

4


• IEEE 802.1Qaz Enhanced Transmission Selection (ETS)

• IEEE 802.1Qaz Data Center Bridging Capabilities Exchange Protocol (DCBX)

• IEEE 802.1 Converged Enhanced Ethernet (CEE) 1.01

• IEEE 802.1aq Shortest Path Bridging (SPB-M)




• Fully programmable OpenFlow 1.3.1 and 1.0 agent for control of native OpenFlow and hybrid ports.

• OpenStack networking plug-in compatible with Grizzly or higher

• Software-controlled VXLAN hardware VTEP gateway

Converged storage I/O• Multi-hop FCoE transit switching with

FIP snooping

• NPIV FCoE to FC forwarder gateway with dynamic multipath load balancing complaint with T11/BB-5

• End-to-end FCoE converged network adapter (can) switching with T11-BB-6

• Native FC ANSI INCITS FC-PI-4 and FC-PI-5

• Dynamic session load balancing for the N_port and F_port functionality

• Multi-hop FCoE for FC Inter-switch Link (ISL) tunneling

• Multi-hop FCoE for standalone FC host bus adapter (HBA) tunneling into storage area network (SAN)

• Virtual SAN (VSAN) to VLAN mapping and FIP snooping bridge (FSB)

• Fabric-provided MAC Address (FPMA) support

• Server-provided MAC Address (SPMA) support in FIP snooping


• Autosensing IEEE 802.1X multi-client, multi-VLAN support for bridging and SPBM/VXLAN services


• Secure Shell (SSH) with public key infrastructure (PKI) support for bridging and SPBM/VXLAN services






• DHCP snooping, DHCP IP and Address Resolution Protocol (ARP) spoof protection


• IP source filtering as a protective and effective mechanism against ARP attacks

Quality of Service (QoS)

• Priority queues: Eight hardware-based queues per port





• Lossless Virtual Output Queuing (VOQ) with configurable scheduling algorithms



IPv4 routing

• Multiple VRF

• Static routing with route labeling


• Open Shortest Path First (OSPF) v2 with graceful restart

• Intermediate System to Intermediate System (IS-IS) with graceful restart

• Border Gateway Protocol (BGP) v4 with graceful restart




• ARP


• DHCPv4 server

• Distributed ARP learning

IPv6 routing

• Multiple VRF


• Static routing


• OSPF v3 with graceful restart

• Intermediate System to Intermediate System (IS-IS) with graceful restart

• Multi-Topology IS-IS






• DHCPv6 server

IPv4/IPv6 multicast

• Internet Group Management Protocol (IGMP) v1/v2/v3 snooping

• Protocol Independent Multicast – Sparse-mode (PIM-SM), Source Specific Multicast (PIM-SSM)

• Protocol Independent Multicast – Dense-mode (PIM-DM), Bidirectional Protocol Independent Multicast (PIM-BiDir)




• (S,G) and (*,G) forwarding

Advanced Layer 2 services

• Ethernet services support using IEEE 802.1ad Provider Bridges (also known as Q-in-Q or VLAN stacking)

• Fabric virtualization services IEEE802.1aq Shortest Path Bridging (SPB-M) and VXLAN

¬ Ethernet Virtual Connection (EVC) support for transparent LAN services such as E-LAN, E-Line and E-Tree

5


¬ Multipoint Ethernet VPN (EVPN) over I-SID or VNI service virtualization or Q-in-Q tunnels

¬ Ethernet network-to-network interface (NNI) and user network interface (UNI)

¬ Service Access Point (SAP)

¬ Service VLAN (SVLAN) and Customer VLAN (CVLAN) support

¬ VLAN translation and mapping including CVLAN to SVLAN

¬ C-tag to S-tag priority mapping

• Port mapping


• MVRP

• High availability VLAN (HA-VLAN) for L2 clusters such as MS-NLB and active-active Firewall clusters



• STP Root Guard

TECHNICAL SPECIFICATIONSProduct specifications and measurements

• Per-port LEDs

• Ethernet/FC: link/activity

• EMP: link/activity

• Per port multi-color beacon support in OS6900-Q32 and OS6900-X72

• System LEDs

• OK: green/yellow



• PWR Save: green

COMPLIANCE AND CERTIFICATIONSEMI/EMC - Commercial

• FCC 47 CFR Part 15 Class A

• ICES-003 Class A


• EMC Directive 89/336/EEC

• EN55022:1998:2006 Class A

• EN55024 :1998:A1: 2001+A2:2003

• EN61000-3-2

• EN61000-3-3

• EN61000-4-2

• EN61000-4-3

• EN61000-4-4

• EN61000-4-5

• EN61000-4-6

• EN61000-4-8

• EN61000-4-11

• CISPR22:1997 Class A

• VCCI (Class A)


• IEEE 802.3 Hipot requirement and 1.5 kV surge on data port for copper interfaces

Safety agency certifications • US UL 60950

• IEC 60950-1:2001: all national deviations

• EN 60950-1: 2001: all deviations

• CAN/CSA-C22.2 No. 60950-1-03

• AS/NZ TS-001 and 60950:2000: Australia

• UL-AR: Argentina

• UL-GS Mark: Germany

• GOST: Russian Federation

• EN 60825-1 Laser

• EN 60825-2 Laser

• CDRH Laser


• IEEE 802.1D STP

• IEEE 802.1p CoS



• IEEE 802.1ak (MVRP)

• IEEE 802.1aq Shortest Path Bridging (SPB)

• IEEE 802.1Qaz ETS/DCBX

• IEEE 802.1 CEE 1.01

• IEEE 802.1Qbb PFC



• IEEE 802.1X Port-based Network Access Control (PNAC).


• IEEE 802.3u Fast Ethernet

• IEEE 802.3z 1 GigE

• IEEE 802.3ab 1 GBASE-T




• IEEE 802.3an 10 GBASE-T

• IEEE 802.3az Energy Efficient Ethernet (EEE)

• IEEE 802.3ba 40 GigE

ITU-T recommendations• ITU-T G.8032/Y.1344 2010: Ethernet Ring

Protection (ERPv2)

ANSI recommendations• INCITS/Project 1647-D/Rev7.10 FC-PI-4

• INCITS/T11/Project 2159-D/Rev 1.23 T11-BB-6 compliance

• INCITS/T11/Project 1871-D/Rev 2.00 T11-BB-5 support

IETF RFCsIPv4



• RFC 2131 DHCPv4

OSPF







• RFC 2740 OSPFv3 for IPv6

RIP

• RFC 1058 RIP v1

• RFC 1722/1723/2453/1724 RIP v2 and MIB



BGP

• RFC 1269/1657/4273 BGP v3 and v4 MIB


• RFC 1771-1774/2842/2918/4271 BGP







6








• RFC 3392/5492 Capabilities Advertisement with BGP-4

• RFC 5396/5668/6793 BGP 4-Octet ASN and Textual Representation of ASN

IS-IS

• RFC 1142/1195/3719/3787/5308 IS-IS v4


• RFC 5120 M-ISIS: Multi-topology IS-IS




IP Multicast



• RFC 2710/3019/3810/MLD v2 for IPv6




• RFC 3569 Source-specific Multicast (SSM)

• RFC 3973 PIM-DM


• RFC 4541 Considerations for IGMP and MLD snooping switches

• RFC 4601/5059 PIM-SM


• RFC 5060 PIM MIB



IPv6
























• RFC 4308 Cryptographic Suites for IP Security Architecture (IPsec)

• RFC 4443/2463 ICMPv6


• RFC 4862/2462 Stateless Address Autoconfiguration

• RFC 5095 Deprecation of type 0 routing headers in IPv6

Manageability


• RFC 959/2640 FTP


• RFC 1155/2578-2580 SMI v1 and SMI v2

• RFC 1157/2271 SNMP


• RFC 1213/2011-2013 SNMP v2 MIB





• RFC 1901-1908/3416-3418 SNMP v2c

• RFC 2096 IP MIB




• RFC 2570-2576/3411-3415 SNMP v3



• RFC 2668/3636 IEEE 802.3 MAU MIB




• RFC 4122 A Universally Unique Identifier (UUID) URN namespace


• RFC 4251/4418 Secure Shell Protocol Architecture with UMAC Message Authentication

• RFC 4252/4253 The Secure Shell (SSH) Authentication Protocol and Transport Layer Protocol



Security

• RFC 1321 MD5









QoS



• RFC 2474/2475/2597/3168/3246 DiffServ


7


• RFC 2697 Single Rate Three Color Marker (srTCM)

• RFC 2698 Two Rate Three Color Marker (trTCM)

Others

• RFC 791/894/1024/1349 IP and IP/ Ethernet

• RFC 792 ICMP

• RFC 768 UDP


• RFC 826 ARP




• RFC 951 Bootstrap Protocol (BOOTP)

• RFC 1151 Remote Desktop Protocol (RDP)



• RFC 1305/2030 Network Time Protocol (NTP) v3 and Simple NTP


• RFC 1518/1519 Classless Inter-Domain Routing (CIDR)

• RFC 1541/1542/2131/3396/3442 DHCP


• RFC 2131/3046 DHCP/ BOOTP Relay



• RFC 2338/3768/2787 VRRP and MIB



• RFC 3176 sFlow

• IETF draft “IP/IPVPN services with IEEE 802.1aq SPB networks”


• OpenFlow Switch Specification v1.3.1

• OpenFlow Switch Specification v1.0.0


Fibre Channel

• FC-PI-4 Fibre Channel T11/08-138v1

• FC-PI-5 Fibre Channel T11 2118-D/Rev 6.10

• FC-BB-5 Backbone 5 T11/1871-D

• FC-BB-6 Backbone 6 T11/2159-D CNA switching

OS6900-X20 OS6900-T20 OS6900-X40 OS6900-T40 OS6900-X72 OS6900-Q32

Port count 20 (SFP+) 20 (10GBase-T) 40 (SFP+) 40 (10GBase-T) 72 (48 SFP+ and 6 QSFP)

32 (QSFP)

Expansion slots 1 1 2 2 N/A N/A

Out-of-band Ethernet port

1 1 1 1 1 1

USB port 1 1 1 1 1 1

Console port 1 1 1 1 1 1

Primary slide-in PSU slot

1 1 1 1 1 1

Backup slide-in PSU slot

1 1 1 1 1 1

Redundant fans 3+1 3+1 3+1 3+1 3+1 3+1

Flash 2 GB 2 GB 2 GB 2 GB 4 GB 4 GB

RAM 2 GB 4 GB 2 GB 4 GB 8 GB 8 GB

Data buffer 9MB 9MB 9MB 9MB 12MB 12MB

Max switching capacity

640 Gb/sNon-blocking

640 Gb/sNon-blocking

1.28Tb/sNon-blocking

1.28Tb/sNon-blocking

1.44 Tb/s Non-blocking

2.56 Tb/sNon-blocking

Throughput 480 Mp/s 480 Mp/s 960 Mp/s 960 Mp/s 1.4 Gp/s 1.92 Gp/s

Latency Sub μs <3.3 μs Sub μs <3.3 μs <650ns <780 ns

Power consumption**

181 W 206 W 242 W 329 W 242 W 312 W

Heat dissipation 618 Btu/h 703 Btu/h 825 Btu/h 1123 Btu/h 825 Btu/h 1065 Btu/h

Mean time between failures (MTBF) with AC power supply

146 520 h 145 569 h 141 490 h 139 840 h 192 778 h 195 601 h

MTBF with DC power supply

153 407 h 152 364 h 147 901 h 146 099 h 206 968 h 210 225 h

Width 43.3 cm (17.06 in) 43.3 cm (17.06 in) 43.3 cm (17.06 in) 43.3 cm (17.06 in) 43.3 cm (17.06 in) 43.3 cm (17.06 in)

Depth 55.9 cm (22.00 in.) 55.9 cm (22.00 in.) 55.9 cm (22.00 in.) 55.9 cm (22.00 in.) 55.9 cm (22.00 in.) 55.9 cm (22.00 in.)

FEATURE MODEL

Product matrix

8


FEATURE MODEL

** Maximum power consumption under full L2 traffic load includes a fan tray, two power supplies, and transceivers; expansion plug-in modules not included. *** Fully populated chassis includes a fan tray, two power supplies, and all expansion plug-in modules; transceivers not included.

*** Ports are dual personality. Operate as FC or Ethernet/VFL.

OS-XNI-U12E OS-XNI-U12 OS-XNI-U4 OS-HNI-U6 OS-QNI-U3 OS-XNI-T8

40 Gb port count (QSFP+) 0 0 0 2 3 0

10 Gb port count 12 ( SFP+)*** 12 ( SFP+) 4 (SFP+) 4 (SFP+) 0 8 (10GBase-T)

8 GFC (2/4/8G FC) 12 (FC SFP+)*** 0 0 0 0 0

Switching capacity 240 Gb/s 240 Gb/s 80 Gb/s 240 Gb/s 240 Gb/s 160 Gb/s

Hot-swappable/interchangeable

Yes Yes Yes Yes Yes Yes

Power consumption 31 W 44 W 19 W 37 W 21 W 52 W

Heat dissipation 145.01 BTU/h 150.13 BTU/h 64.83 BTU/h 126.25 BTU/h 116 BTU/h 191 BTU/h

MTBF (hours) 5,866,720 h 5,794,716 h 10,211,792 h 6,514,828 h 6,896,504 h 6,228,124 h

PS MODELS DESCRIPTION DIMENSIONS (W X L X H) WEIGHT

OS6900-BP-F Modular AC backup power supply. Front-to-back cooling. Provides 450 W AC system power to one OS6900 device.

50.5 mm x 300 mm x 40.2 mm (1.99 in x 11.8 in x 1.58 in.)

1.2 kg (2.6 lb)

OS6900-BP-R Modular AC backup power supply. Back-to-front cooling. Provides 450 W AC system power to one OS6900 device.


1.2 kg (2.6 lb)

OS6900-BPD-F Modular DC backup power supply. Front-to-back cooling. Provides 450 W DC system power to one OS6900 device.


1.2 kg (2.6 lb)

OS6900-BPD-R Modular DC backup power supply. Back-to-front cooling. Provides 450 W DC system power to one OS6900 device.


1.2 kg (2.6 lb)

FEATURE MODEL

Expansion module matrix

Power supplies

Power suppliesAll OmniSwitch 6900 models support 1+1 redundant, hot-swappable AC and DC power supplies. The primary and backup power supply units are internal, but removable to allow for easier maintenance and replacement. There is no service interruption when a new power supply is installed or an old one replaced.

OS6900-X20 OS6900-T20 OS6900-X40 OS6900-T40 OS6900-X72 OS6900-Q32

Height 4.4 cm (1.73 in.) 4.4 cm (1.73 in.) 4.4 cm (1.73 in.) 4.4 cm (1.73 in.) 4.4 cm (1.73 in.) 4.4 cm (1.73 in.)

Weight (chassis & fan)

7.61 kg (16.8 lb) 7.61 kg (16.8 lb) 7.78 kg (17.15 lb) 7.78 kg (17.15 lb) 7.78 kg (17.15 lb) 7.78 kg (17.15 lb)

Weight (fully populated***)

10.21 kg (22.5 lb) 10.21 kg (22.5 lb) 10.86 kg (23.95 lb)

10.86 kg (23.95 lb) 10.86 kg (23.95 lb) 10.86 kg (23.95 lb)

Operating temperatureFront-to-rear airflow

0°C to 45°C (32°F to 113°F)55°C shutdown






Operating temperatureRear-to-front airflow







Storage temperature

-10°C to 70°C (14°F to 158°F)

-10°C to 70°C (14°F to 158°F)

-10°C to 70°C (14°F to 158°F)

-10°C to 70°C (14°F to 158°F)

-10°C to 70°C (14°F to 158°F)

-10°C to 70°C (14°F to 158°F)

Humidity (operating)













9


OS6900 SWITCH FAMILY

OS6900-X72-F-xx OS6900-X72: 10Gigabit/40Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 48 1/10G SFP+ ports and 6 40G QSFP+ ports. QSFP+ ports operate as single 40GE port or Quad-10GE. Console and Ethernet management ports are RJ45. Front to Rear cooling. The chassis includes a 450W AC power supply. A second power supply slot is supported for redundancy. Redundant power supply shall be ordered separately. The bundle ships with user manuals access card and rack mounts. –xx to be replaced with the country-specific power cord code (e.g. –EU for Europe).

OS6900-X72-R-xx OS6900-X72: 10Gigabit/40Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 48 1/10G SFP+ ports and 6 40G QSFP+ ports. QSFP+ ports operate as single 40GE port or Quad-10GE. Console and Ethernet management ports are RJ45. Rear to Front cooling. The chassis includes a 450W AC power supply. A second power supply slot is supported for redundancy. Redundant power supply shall be ordered separately. The bundle ships with user manuals access card and rack mounts. –xx to be replaced with the country-specific power cord code (e.g. –EU for Europe).

OS6900-X72D-F OS6900-X72: 10Gigabit/40Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 48 1/10G SFP+ ports and 6 40G QSFP+ ports. QSFP+ ports operate as single 40GE port or Quad-10GE. Console and Ethernet management ports are RJ45. Front to Rear cooling. The chassis includes a modular DC power supply. A second power supply slot is supported for redundancy. Redundant power supply shall be ordered separately. The bundle ships with user manuals access card and rack mounts.

OS6900-X72D-R OS6900-X72: 10Gigabit/40Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 48 1/10G SFP+ ports and 6 40G QSFP+ ports. QSFP+ ports operate as single 40GE port or Quad-10GE. Console and Ethernet management ports are RJ45. Rear to Front cooling. The chassis includes a modular DC power supply. A second power supply slot is supported for redundancy. Redundant power supply shall be ordered separately. The bundle ships with user manuals access card and rack mounts.

OS6900-Q32-F-xx OS6900-Q32: 40 Gb Ethernet L3 fixed configuration chassis in a 1U form factor with 32 QSFP+ ports. Ports operate as single 40GigE port or Quad-10GigE. Front-to-back cooling. The chassis includes a 450W AC power supply. A second power supply slot is supported for redundancy. Redundant power supply must be ordered separately. The bundle ships with a country-specific power cord, user manuals access card, rack mounts, and USB to RJ-45 adaptor. (xx to be replaced with the country-specific power cord code (for example, –EU for Europe).)

OS6900-Q32-R-xx OS6900-Q32: 40 Gb Ethernet L3 fixed configuration chassis in a 1U form factor with 32 QSFP+ ports. Ports operate as single 40GigE port or Quad-10GigE. Back-to-front cooling. The chassis includes a 450W AC power supply. A second power supply slot is supported for redundancy. Redundant power supply shall be ordered separately. The bundle ships with a country-specific power cord, user manuals access card, rack mounts, and USB to RJ-45 adaptor. (xx to be replaced with the country-specific power cord code (for example,–EU for Europe).)

OS6900-Q32D-F OS6900-Q32: 40 Gb Ethernet L3 fixed configuration chassis in a 1U form factor with 32 QSFP+ ports. Ports operate as single 40GigE port or Quad-10GigE. Front-to-back cooling. The chassis includes a modular DC power supply. A second power supply slot is supported for redundancy. Redundant power supply must be ordered separately. The bundle ships with a user manuals access card, rack mounts, and USB to RJ-45 adaptor.

OS6900-Q32D-R OS6900-Q32: 40 Gb Ethernet L3 fixed configuration chassis in a 1U form factor with 32 QSFP+ ports. Ports operate as single 40GigE port or Quad-10GigE. Back-to-front cooling. The chassis includes a modular DC power supply. A second power supply slot is supported for redundancy. Redundant power supply must be ordered separately. The bundle ships with a user manuals access card, rack mounts, and USB to RJ-45 adaptor.

OS6900-T20-F-xx OS6900-T20: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 20 10GBase-T ports, auto-negotiable 100-BaseT, 1/10 GigE one optional module slot. Front-to-back cooling. The chassis includes a 450W AC power supply. A second power supply slot is supported for redundancy. Redundant power supply must be ordered separately. The OS6900-20 ships with a country-specific power cord, user manuals access card, rack mounts, and USB to RJ-45 adapter. (xx to be replaced with the country-specific power cord code (for example,–EU for Europe).)

OS6900-T20D-F OS6900-T20: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 20 10GBase-T ports, auto-negotiable 100-BaseT, 1/10 GigE one optional module slot. Front-to-back cooling. The chassis includes a modular DC power supply. A second power supply slot is supported for redundancy. Redundant power supply must be ordered separately. The bundle ships with user manuals access card, rack mounts, and USB to RJ-45 adapter.


10



OS6900-T20-R-xx OS6900-T20: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 20 10GBase-T ports, auto-negotiable 1/10 GigE one optional module slot. Back-to-front cooling. The chassis includes a 450W AC power supply. A second power supply slot is supported for redundancy. Redundant power supply must be ordered separately. The OS6900-20 ships with a country-specific power cord, user manuals access card, rack mounts, and USB to RJ-45 adapter. (xx to be replaced with the country-specific power cord code (for example,–EU for Europe).)

OS6900-T20D-R OS6900-T20: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 20 10GBase-T ports, auto-negotiable 100-BaseT, 1/10 GigE one optional module slot. Back-to-front cooling. The chassis includes a modular DC power supply. A second power supply slot is supported for redundancy. Redundant power supply must be ordered separately. The bundle ships with a user manuals access card, rack mounts, and USB to RJ-45 adapter.

OS6900-T40-F-xx OS6900-T40: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 40 10GBase-T ports, auto-negotiable 100-BaseT, 1/10 GigE two optional module slots. Front-to-back cooling. The chassis includes a 450W AC power supply. A second power supply slot is supported for redundancy. Redundant power supply must be ordered separately. The OS6900-40 ships with a country-specific power cord, user manuals access card, rack mounts, and USB to RJ-45 adapter. (xx to be replaced with the country-specific power cord code (for example,–EU for Europe).)

OS6900-T40D-F OS6900-T40: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 40 10GBase-T ports, auto-negotiable 100-BaseT, 1/10 GigE two optional module slots. Front-to-back cooling. The chassis includes a modular DC power supply. A second power supply slot is supported for redundancy. Redundant power supply must be ordered separately. The bundle ships with a user manuals access card, rack mounts, and USB to RJ-45 adapter.

OS6900-T40-R-xx OS6900-T40: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 40 10GBase-T ports, auto-negotiable 100-BaseT, 1/10 GigE two optional module slots. Back-to-front cooling. The chassis includes a 450W AC power supply. A second power supply slot is supported for redundancy. Redundant power supply must be ordered separately. The OS6900-40 ships with a country-specific power cord, user manuals access card, rack mounts, and USB to RJ-45 adapter. (xx to be replaced with the country-specific power cord code (for example,–EU for Europe).)

OS6900-T40D-R OS6900-T40: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 40 10GBase-T ports, auto-negotiable 100-BaseT, 1/10 GigE two optional module slots. Back-to-front cooling. The chassis includes a modular DC power supply. A second power supply slot is supported for redundancy. Redundant power supply must be ordered separately. The bundle ships with a user manuals access card, rack mounts, and USB to RJ-45 adapter.

OS6900-X20-F-xx OS6900-X20: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 20 SFP+ ports, one optional module slot. The chassis includes a 450 W front-to-back cooling AC power supply. (xx to be replaced with the country-specific power cord code (for example,–EU for Europe).)

OS6900-X20D-F OS6900-X20: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 20 SFP+ ports, one optional module slot. The chassis includes a 450 W front-to-back cooling DC power supply.

OS6900-X40-F-xx OS6900-X40: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 40 SFP+ ports, two optional module slots. The chassis includes a 450 W front-to-back cooling AC power supply. (xx to be replaced with the country-specific power cord code (for example,–EU for Europe).)

OS6900-X40D-F OS6900-X40: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 40 SFP+ ports, two optional module slots. The chassis includes a 450 W front-to-back cooling DC power supply.

OS6900-X20-R-xx OS6900-X20: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 20 SFP+ ports, one optional module slot. The chassis includes a 450 W back-to-front cooling AC power supply. (xx to be replaced with the country-specific power cord code (for example,–EU for Europe).)

OS6900-X20D-R OS6900-X20: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 20 SFP+ ports, one optional module slot. The chassis includes a 450 W back-to-front cooling DC power supply.

OS6900-X40-R-xx OS6900-X40: 10 Gb Ethernet L2/L3 fixed-configuration chassis in a 1U form factor with 40 SFP+ ports, two optional module slots. The chassis includes a 450 W back-to-front cooling AC power supply. (xx to be replaced with the country-specific power cord code (for example,–EU for Europe).)

OS6900-X40D-R OS6900-X40: 10 Gb Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 40 SFP+ ports, two optional module slots. The chassis includes a 450 W back-to-front cooling DC power supply.

11


PLUG-IN MODULES

OS-XNI-U12E 10 Gb Ethernet or 2/4/8 Gigabit Fibre Channel (FC) optional module for the OS6900 series of switches with 12 SFP+ ports that support 1Gig and 10 Gig Ethernet speeds or 2Gig/4Gig/8Gig FC speeds. Requires OS6900-SW-DC license to use the ports in FC mode.

OS-XNI-U12 10 Gb Ethernet Optional Module for the OS6900 series of switches. Supports 12 SFP+ ports.

OS-XNI-U4 10 Gb Ethernet Optional Module for the OS6900 series of switches. Supports 4 SFP+ ports.

OS-HNI-U6 Optional Module for the OS6900 series of switches. Supports 2 QSFP+ ports and 4 SFP+ ports.

OS-QNI-U3 40 Gigabit Ethernet Optional Module for the OS6900 series of switches. Supports 3 QSFP+ ports.

OS-XNI-T8 10 Gb Ethernet Optional Module for the OS6900 series of switches with 8 10GBase-T ports that support 100-BaseT, 1 G and 10 G speeds.

BACKUP POWER SUPPLIES

OS6900-BP-F-xx Modular 450W AC backup power supply. Front-to-back cooling. Provides backup system power to one 6900 switch; (xx to be replaced with the country-specific power cord code (for example,–EU for Europe).)

OS6900-BPD-F Modular 450W DC backup power supply. Front-to-back cooling. Provides backup system power to one 6900 switch.

OS6900-FT-F OS6900 replacement fan tray; front-to-back cooling.

OS6900Q-FT-F OS6900Q-FT-F : OS6900Q replacement fan tray; front to back cooling

OS6900-BP-R-xx Modular 450W AC backup power supply. Back-to-front cooling. Provides backup system power to one 6900 switch; (xx to be replaced with the country-specific power cord code (for example,–EU for Europe).)

OS6900-BPD-R Modular 450W DC backup power supply. Back-to-front cooling. Provides backup system power to one 6900 switch.


OS6900-FT-R OS6900 replacement fan tray; back-to-front cooling.

OS6900Q-FT-R OS6900Q-FT-R : OS6900Q replacement fan tray; back to front cooling

SOFTWARE

OS6900-SW-AR Advanced routing software license. Includes support for Policy Based Routing, VRF, BGP, OSPFv2, VRRPv2, PIM-SM/DM, DVMRP, IPv6 Routing, OSPFv3, RIPng, VRRPv3, SPB, Virtual Chassis (VC), and if supported VXLAN VTEP.

GIGE TRANSCEIVERS

SFP-GIG-T 1000Base-T Gb Ethernet Transceiver (SFP Multiple Source Agreement, MSA). SFP works at 1000 Mb/s speed and full-duplex mode.

SFP-GIG-SX 1000Base-SX Gb Ethernet optical transceiver (SFP MSA).

SFP-GIG-LX 1000Base-LX Gb Ethernet optical transceiver (SFP MSA).

SFP-GIG-LH40 1000Base-LH Gb Ethernet optical transceiver (SFP MSA). Typical reach of 40 km on 9/125 µm SMF.

SFP-GIG-LH70 1000Base-LH Gb Ethernet optical transceiver (SFP MSA). Typical reach of 70 km on 9/125 µm SMF.

10 GIGE TRANSCEIVERS

SFP-10G-SR 10 Gb optical transceiver (SFP+). Supports multimode fiber over 850 nm wavelength (nominal) with an LC connector. Typical reach of 300 m.

SFP-10G-LR 10 Gb optical transceiver (SFP+). Supports monomode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 10 km.

SFP-10G-ER 10 Gb optical transceiver (SFP+). Supports monomode fiber over 1550 nm wavelength (nominal) with an LC connector. Typical reach of 40 km.

SFP-10G-LRM 10 Gb optical transceiver (SFP+). Supports multimode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 220 m on FDDI-grade (62.5 µm).

SFP-10G-GIG-SR Dual-speed SFP+ optical transceiver. Supports multimode fiber over 850 nm wavelength (nominal) with an LC connector. Supports 1000Base-SX and 10GBase-SR.

SFP-10G-24DWD80 10 Gb Dense Wavelength Division Multiplexing (DWDM) optical transceiver (SFP+ MSA), 1558.17 nm/Channel 24 (100GHz ITU Grid), 80 km, LC Connector.


OS6900-SW-DC Data Center Software for support of DCBX, FCoE and EVB on OS6900. One license required per chassis.

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. (July 2015)

SFP-10G-ZR 10 Gigabit industrial optical transceiver (SFP+). Supports data transmission at 1550nm over up to 80km single mode fiber. LC connector type.

SFP-10G-C1M 10 Gb direct attached copper cable (1 m, SFP+)



40 GIGE TRANSCEIVERS

QSFP-40G-SR Four-channel 40 Gb optical transceiver (QSFP+). Supports link lengths of 100 m and 150 m, respectively, on OM3 and OM4 multimode fiber cables.

QSFP-40G-LR Four-channel 40 Gb optical transceiver (QSFP+). Supports single mode fiber over 1310 nm wavelength. Typical reach 10 km.

QSFP-4X10G-SR 40 Gb to 4 x 10 Gb Multifiber Push-On (MPO) fiber splitter transceiver

QSFP-40G-C1M 40 Gb direct attached copper cable (1 m, QSFP+)



QSFP-4X10G-C1M 40 Gb to 4 x 10 Gb direct attached copper splitter cable (1m, QSFP+)



SFP-FC-SR Triple-speed SFP+ Fibre Channel optical transceiver. Supports multimode fiber 850nm wavelength with an LC connector. Supports auto-sensing 8G Fibre Channel (FC), 4GFC and 2GFC.


QSFP+ DIRECT ATTACHED CABLES

FC SFP+ TRANSCEIVERS



ALCATEL-LUCENT OMNISWITCH 9000ECHASSIS LAN SWITCH

The Alcatel-Lucent OmniSwitch® 9000E Chassis LAN Switch (CLS) family is a high-capacity core switch that addresses large enterprise network needs for secure and highly available core switches to support voice, data and video solutions. The OmniSwitch 9000E CLS, part of the OmniSwitch portfolio, is also ideal for use in data centers or metro Ethernet environments because it was designed for deployments requiring high capacity, scalability and virtualization.

The OmniSwitch 9000E CLS family offers enterprises and service provider’s gigabit and 10 gigabit capacity links, advanced layer-3 switching, high resiliency with Multi Chassis Linkagg (MC-LAG), high availability through in-service software upgrades (ISSUs), layer-2 segregation using VLANs, stacked VLANs and Virtual Private LAN Service (VPLS), as well as layer-3 segregation using multiple virtual routing and forwarding (VRF). The OmniSwitch 9000E CLS also uses the familiar and field-proven Alcatel-Lucent Operating System (AOS), providing effortless deployment and extended features to address new customer requirements.

Finally, the OmniSwitch 9000E CLS family promotes eco-sustainability by using minimal power, thus reducing energy bills and air-conditioning costs.

KEY FEATURES AND BENEFITSHigh availability

• Smart continuous switching and ISSU support for non-stop operation in redundant chassis management module (CMM) configuration

• Extensive layer-2 and layer-3 protocols support for spatial resiliency

High performance and scalability• Wire-rate processing for simultaneous

layer-2 and IPv4/IPv6 traffic

• High density Gigabit Ethernet (GigE) (384 ports) and 10GigE (192 ports)

• Extended scalability in network policies, access control lists (ACLs)/quality of service (QoS) and multicast flows for a better VoIP and video experience

• MC-LAG provides system resiliency with node level redundancy while increasing network scalability with multipath active-active dual homing

• Up to 64,000 media access control (MAC) addresses per chassis

• Up to 4,094 VLAN IDs

• Jumbo frames up to 9,216 bytes

Comprehensive security• Flexible device/user authentication with

Access Guardian (802.1x/MAC/captive portal), with built-in host integrity check (HIC), intrusion detection system (IDS) and quarantine enforcement mechanism

• Extensive support of Alcatel-Lucent Operating System (AOS) user-oriented features

Large campus and metro network• Layer-2 deployment using stacked VLANs,

including OA&M toolbox and multicast support – Metro Ethernet access-ready

• Layer-3 deployment using multiple-VRF

• IP/MPLS deployment using VPLS

Convergence • Enhanced VoIP and video perfor-mance

with policy-based QoS

• PoE+ support for IP phones, WLAN access points and video cameras with up to 2400 W of power through dedicated power shelves. PoE power negotiation via LLDP MED TLV extensions

• Unified Access for wired and wireless users. Simplifying network architecture with automated controls and enhanced security:

¬ SIP Fluency to monitor and prioritize SIP flows

¬ Airgroup™ Network Services for Bonjour enabled devices

¬ Integrated Policy with User Network Profile

¬ Citrix VDI fluency enables differentiated services for VDI flows

• Advanced, Secure BYOD services in enterprise networks*:

¬ Zero-touch guest management and self registration

¬ Device on-boarding and automated 802.1x provisioning

¬ Device posture/health check, and fingerprinting,

¬ Device Profiling* Integrated with ClearPass

2

Alcatel-Lucent OmniSwitch 9000EALCATEL-LUCENT ENTERPRISE DATA SHEET

ALCATEL-LUCENT OMNISWITCH 9000E CLS MODELSThe OmniSwitch 9000E CLS family offers customers an extensive choice of chassis, modules and power options to match their infrastruc-ture requirements.

Chassis modelsSeveral chassis options are offered to meet density requirements.

OMNISWITCH 9700E/OMNISWITCH 9702E OMNISWITCH 9800E

NUMBER OF SLOTS

Chassis management module (CMM) 2 2

Network interface (NI) 8 16

Power supply (AC/DC) 3 4

PHYSICAL

Height (19-in. and 23-in. rack mount) 11U 17U

Dimensions (HxWxD) 48.9 cm x 44.2 cm x 44.0 cm (19.25 in x 17.4 in x 17.3 in)

75.6 cm x 44.2 cm x 44.0 cm (29.75 in x 17.4 in x 17.3 in)

Weight (loaded/empty) 60 kg (130 lb)/25 kg (56 lb) 85 kg (190 lb)/36 kg (80 lb)

ENVIRONMENT

Operating temperature 0°C to 45°C (32°F to 113°F) 0°C to 45°C (32°F to 113°F)

Storage temperature -20°C to 85°C (-4°F to 185°F) -20°C to 85°C (-4°F to 185°F)

Operating humidity 10% to 90% (non-condensing) 10% to 90% (non-condensing)

Storage Humidity 10% to 95% (non-condensing) 10% to 95% (non-condensing)

Cooling Front-to-back cooling Front-to-back cooling

Power (chassis + fan tray) <80 W <80 W

Heat dissipation (fully loaded – worst case) <3485 BTU/hr <6480 BTU/hr

Altitude 0 to 4 km (13,000 ft) 0 to 4 km (13,000 ft)

ModulesThe table below lists the choice of modules available for the OmniSwitch 9000E CLS family.

DESCRIPTION POWER

MANAGEMENT MODULES

OS9700E-CMM OmniSwitch 9700E Chassis Management Module <30 W



NETWORK INTERFACES

OS9-XNI-U2E 2 unpopulated ports of 10GBase-X (XFP MSA) <32 W

OS9-XNI-U12E 12 unpopulated ports of 10GBase-X (SFP+ MSA) <40 W

OS9-GNI-U24E 24 unpopulated ports of 1000Base-X MiniGBIC (SFP MSA) <40 W

OS9-GNI-P24E 24 ports of 10/100/1000Base-T/TX (RJ-45) up to 30W of PoE per port <54 W

OS9-GNI-C24E 24 ports of 10/100/1000Base-T/TX (RJ-45) <55 W

All network interfaces and transceivers are hot-swappable and can be used in any available NI slot of any OmniSwitch 9000E CLS chassis.

Power suppliesAll OmniSwitch 9000 CLS models support redundant and hot-swappable AC and DC power supplies.

OS9-PS-0725A OS9-PS-0725D

Input voltage 100 V AC to 250 V AC (auto-ranging) -48 V DC

Input current (max) 7.9 A (110 V)4.0 A (220 V) 17.8 A (-48V)

Operating frequency 47 Hz to 63 Hz –

Efficiency 83% 85%

Maximum output power 725 W 725 W

3


PoE shelves All OmniSwitch 9000E CLS models support an optional power shelf to provide power to PoE+ -capable devices.

IPS 0600

Power Supply (AC) physical 4

Height (19-in and 23-in rack mount) 2.9RU

Dimensions (HxWxD) 75.6cm x 44.2cm x 44.0cm (29.75in x 17.4in x 17.3in)

Maximum output power 2400W (4x600)

Example of PoE devices count: Class 0&3 (15.4W)/Class 4(30W) 140/72

Compliance and certificationsEmission

• FCC CFR 47 part 15 (Class A)

• ICES-003 (Class A)


• VCCI (Class A)


• EN 55022:2006 (Emission Standard)

• EN 61000-3-2:2006

• EN 61000-3-3:1995 +A2:2005

Immunity

• IECEN 55024:1998 +A1:2001 +A2:2003

• EN 61000-4-2:2001

• EN 61000-4-3:2002

• EN 61000-4-4:2004

• EN 61000-4-5:2001

• EN 61000-4-6:2004

• EN 61000-4-8:2001

• EN 61000-4-11:2004


• US UL 60950


• EN 60950-1:2001; all deviations

• CAN/CSA-C22.2 No. 60950-1-03





• EN 60825-1:1993 +A1:1997 +A2:2001 Laser,

• EN 60825-2:2004 Laser

• CDRH Laser

DETAILED PRODUCT FEATURESSimplified manageabilityManagement interfaces

• Dedicated EMP RJ-45 port for management and diagnostics

• Intuitive, familiar CLI reduces training costs

• Easy-to-use, point-and-click, web-based element manager (WebView) with built-in help for easy configuration

• Integrated with Alcatel-Lucent OmniVista® 2500 Network Management System (NMS)

• Full configuration and reporting using Simple Network Management Protocol (SNMP) v1/2/3 across all OmniSwitch families to facilitate third-party NMS integration

• Remote switch access using Telnet or Secure Shell (SSH)



• Onboard flash for, for example, storing switch configuration, monitoring logs and AOS images

• Status LEDs for at-a-glance monitoring of system, power and line card status



• Port-based mirroring for troubleshooting and lawful interception; supports four sessions with multiple sources-to-one destination

• Policy-based mirroring allows selection of the type of traffic to mirror by using QoS policies

• Remote port mirroring facilitates passing mirrored traffic through the network to a remotely connected device

• Port monitoring feature allows capture of Ethernet packets to a file to assist in troubleshooting

• sFlow v5 and RMON: For advanced monitoring and reporting capabilities for statistics, history, alarms and events

• IP tools: Ping and traceroute

• ITU-T Y.1731 and IEEE 802.1ag Ethernet OA&M: Connectivity Fault Management and performance measurements (layer-2 ping and link trace)

• IEEE 802.3ah Ethernet in the First Mile (EFM) for link monitoring, remote fault detection, and loopback control (layer-1 ping)

• Unidirectional Link Detection (UDLD) detects and disables unidirectional links on fiber optic interfaces

• Digital Diagnostic Monitoring (DDM):

Real-time diagnostics of fiber connections for early detection of optical signal deterioration

• Link Monitoring: link flap detection and link error counts to identify bad connections and automatically make adjustments to use the links that are good

• Time Domain Reflectometry (TDR): used for locating break or other discontinuity in copper cable



• Auto MDI/MDIX automatically configures transmit and receive signals to support straight-through and crossover cabling

• BOOTP/DHCP client with option 60 allows auto-configuration of switch IP information for simplified deployment

• DHCP v4/v6 relay to forward client requests to a DHCP server


• IEEE 802.1AB LLDP with MED extensions for automated device discovery and IP phone provisioning

• Multiple VLAN Registration Protocol (MVRP) and GARP VLAN Registration Protocol (GVRP) for 802.1Q/1ak-compliant VLAN pruning and dynamic VLAN creation

• Dynamic Virtual Network Profiles (vNP) for automating virtual machine/device attachment to the network with guaranteed SLA

• Auto-QoS for switch management and IP phone traffic


Resiliency and high availability• Smart continuous switching technology

for instantaneous and transparent CMM failover in redundant CMM configuration

• MC-LAG active-active dual homing over IEEE 802.3ad (LACP) interfaces enabling a highly resilient architecture

4


• ISSU for non-disruptive maintenance software upgrade in redundant CMM configuration

• ITU-T G.8032 Ethernet Ring Protection (ERPv2) designed for loop protection and fast convergence times (sub 50 ms) in ring topologies

• Ring Rapid Spanning Tree (RRSTP) optimized for ring topology to provide less than 100-ms convergence time

• IEEE 802.1s Multiple Spanning Tree Protocol (MSTP): Encompasses IEEE 802.1D Spanning Tree Protocol (STP) and IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

• Per-VLAN Spanning Tree (PVST+) and Alcatel-Lucent 1x1 STP mode

• IEEE 802.3ad Link Aggregation Control Protocol (LACP) and static LAG groups across modules are supported

• Dual-home link support for sub-second link protection without STP

• Virtual Router Redundancy Protocol (VRRP) to provide highly available routed environments


• Broadcast, unknown unicast and multicast storm control to avoid degradation in overall system performance

• Redundant and hot-swappable power supplies, transceiver modules offering uninterruptible service

• Dual image and dual configuration file storage provides backup

• WCCPv2 for transparent traffic flow redirection and better bandwidth utilization

• Split Stack Protection Helper for OmniSwitch Stackable switches


• AOS Access Guardian framework for comprehensive user-policy-based network access control (NAC)

• Auto-sensing 802.1X multi-client, multi-VLAN

• MAC-based authentication for non-802.1x hosts

• Web-based authentication (captive portal): A customizable web portal residing on the switch that can be used for authenticating supplicants as well as non-supplicants

• Group mobility rules and “guest” VLAN support

• Authenticated VLAN that challenges users

with username and password and supports dynamic VLAN access based on user

• Host integrity check (HIC) agent on each switch makes it an HIC enforcer and facilitates endpoint device control for company policy compliance; quarantine and remediation are supported as required

• User Network Profile (UNP): Simplifies NAC management and control by dynamically providing pre-defined policy configuration to authenticated clients – VLAN, ACL, bandwidth, HIC


• Centralized RADIUS and Lightweight Directory Access Protocol (LDAP) user authentication

• TACACS+ client allows for authentication, authorization and accounting (AAA) with a remote TACACS+ server

• Microsoft Active Directory authentication snooping (Kerberos)

• Bring Your Own Device (BYOD)* – Provides on-boarding of Guest, IT / non-IT issued and silent devices. Restriction / Redirection / Remediation of traffic from non-compliant devices. Uses RADIUS CoA to dynamically enforce User Network Profiles based on Authentication, Profiling, and Posture check of devices.

*Requires ClearPass


• Support for Alcatel-Lucent OmniVista 2500 NMS Quarantine Manager and quarantine VLAN

• Learned Port Security (LPS) or MAC Address Lockdown: Secures the network access on user or trunk ports based on MAC address

• DHCP snooping, DHCP IP/Address Resolution Protocol (ARP) spoof protection

• Embedded traffic anomaly detection (TAD) monitors traffic patterns typical for worm-like viruses and either shuts down the port or reports to the management system



• Support of Microsoft® Network Access Protection (NAP)

• Bridge Protocol Data Unit (BPDU) blocking automatically shuts down user ports if an STP BPDU packet is seen to prevent topology loops

• STP Root Guard: Prevents edge devices from becoming STP root nodes

• LLDP Security mechanism for rogue device detection and restriction

• Loopback Detection

Traffic filtering

• ACLs to filter out unwanted traffic including denial of service (DoS) attacks; flow based filtering in hardware (layer 1 to layer 4)

Converged networks (QoS)• Priority queues: Eight hardware-based

queues per port for flexible QoS management

• Traffic prioritization: Flow-based QoS with internal and external prioritization (also known as re-marking)

• Bandwidth management: Flow-based bandwidth management, ingress rate limiting and egress rate shaping per port

• Queue management with configurable scheduling algorithm: Strict Priority Queuing (SPQ), Weighted Round Robin (WRR) and Deficit Round Robin (DRR)

• Congestion avoidance: Support for End-to-End Head-of-Line (E2E-HOL) blocking prevention and flow control

• LLDP network polices for dynamic designation of VLAN-ID and layer-2/layer-3 priority for IP phones

• Auto-QoS for switch management traffic as well as traffic from Alcatel-Lucent IP phones

• Differentiated Services for Virtual Desktop Interface (VDI) flows. One-touch QoS support for Citrix VDI.

• Fluent network for Voice, Video and Data:

¬ Session Initiation Protocol (SIP) detection, monitoring and tracking. SIP profile for QoS, real-time conversation quality information concerning packet loss, jitter, MOS score and R-Factor.

¬ Multicast DNS Relay – Bonjour protocol support for wired Airgroup

IPv4 routing• Multiple VRF for network segmentation

and Inter-VRF route leaking

• Static routing, Routing Information Protocol (RIP) v1 and v2

• Open Shortest Path First (OSPF) v2, Intermediate System-to-Intermediate System (IS-IS), Border Gateway Protocol (BGP) v4

• Generic Routing Encapsulation (GRE) tunneling


• VRRP v2


• ARP

• IP SLA measurement

• IP router port

5


IPv6 routing• Static routing


• OSPF v3

• BGP v4 (with extensions to IPv6 routing)


• IS-IS v6

• Multi Topology Routing in IS-IS (M-ISIS)

• VRRP v3


IPv4/IPv6 multicast• Internet Group Management Protocol

(IGMP) v1/v2/v3 snooping for optimized multicast traffic

• Protocol Independent Multicast - Sparse-Mode (PIM-SM)/Protocol Independent Multicast - Dense-Mode (PIM-DM)


• Multicast Listener Discovery (MLD) v1/v2 snooping for optimized multicast traffic

Metro Ethernet access• Ethernet services support per IEEE

802.1ad Provider Bridge services (also known as Q-in-Q or VLAN stacking):

¬ Transparent LAN services with service VLAN (SVLAN) and customer VLAN (CVLAN) concept

¬ Ethernet network-to-network interface (NNI) and user-network interface (UNI) services

¬ Service access point (SAP) profile identification

¬ CVLAN-to-SVLAN translation

• Ethernet OA&M compliant with ITU Y.1731 and IEEE 802.1ag version 8.1 for connectivity fault and performance management and IEEE 802.3ah EFM for link OA&M

• Service Assurance Agent (SAA) for SLA compliance validation


• MAC-Forced Forwarding support according to RFC 4562


• IP Multicast VLAN (IPMVLAN)

• Optimized Ethernet access services delivery

¬ Network bandwidth protection against overload of video traffic

¬ Multicast streams isolation from multiple content providers over the same interface

• MEF 9 and 14 certified


• Customer provider edge (CPE) test head traffic generator and analyzer tool to validate customer Service Level Agreements (SLA)

• TR-101 PPPoE Intermediate Agent allowing for the PPPoE network access method

MPLS• VPLS support to provide transparent LAN

services over an IP/MPLS network

• LDP support (including graceful restart) for transport tunnel setup and signaling

• Flexible priority mapping/override on a per-service access point (SAP) basis

• Static fast re-route to allow configuration of backup static label switched path (LSP) tunnels for enhanced resiliency

• LSP ping and LSP traceroute to assist with detection of traffic problems, such as “black holes” or incorrect routing

• Consistent service-based-architecture for smoother integration with our other MPLS-enabled solutions


• IEEE 802.1D (STP)



• IEEE 802.1ad (Provider Bridges)


• IEEE 802.1ak (Multiple VLAN Registration Protocol)



• IEEE 802.1X (Port-based Network Access Control)








• IEEE 802.3ae (10G Ethernet)

ITU-T recommendations• ITU-T G.8032v2 (Ethernet Ring Protection)

• ITU-T Y.1731 OA&M fault and performance management

IETF standardsIPv4



• RFC 5880, 5881, 5882 BFD

OSPF

• RFC 1253/1850/2328 OSPFv2 and MIB

• RFC 1587/3101 OSPF NSSA Option





RIP

• RFC 1058 RIP v1

• RFC 1722/1723/1724/2453/1724 RIP v2 and MIB



BGP

• RFC 1269/1657 BGP v3 and v4 MIB


• RFC 1771-1774/2842/2918/3392 BGP v4



• RFC 1997/1998 BGP Communities Attribute




• RFC 2545 BGP-4 Multiprotocol Extensions for IPv6 Inter-Domain Routing


• RFC 2858 Multiprotocol Extensions for BGP-4


IS-IS

• RFC 1142 OSI IS-IS for Intra-domain Routing Protocol

• RFC 1195 OSI IS-IS for Routing

• RFC 2763 Dynamic Host Name

• RFC 2966 Route Leaking

• RFC 3719 Interoperable Networks

• RFC 3787 Interoperable IP Networks using IS-IS

• RFC 5308 Routing IPv6 with IS-IS

• RFC 5120 Multi Topology Routing in IS-IS

IP Multicast• RFC 1075 DVMRP



• RFC 2362/4601/5059 PIM-SM


• RFC 2710 Multicast Listener Discovery for IPv6

6


• RFC 2715/2932 Multicast Routing MIB

• RFC 2934 PIM MIB for IPv4

• RFC 3376 IGMPv3

• RFC 4541 Considerations for IGMP and MLD snooping


• RFC 5132 IP Multicast MIB


IPv6


• RFC 2292/2553/3493/3542 IPv6 Sockets

• RFC 2373/2374/3513/3587 IPv6 Addressing


• RFC 2460/2461/2462/2464 Core IPv6

• RFC 2461 NDP

• RFC 2463/2466/4443 ICMP v6 and MIB

• RFC 2893/4213 IPv6 Transition Mechanisms


• RFC 3595 TC for Flow Label



Manageability

• RFC 854/855 Telnet and Telnet Options

• RFC 959/2640 FTP


• RFC 1155/2578-2580 SMI v1 and SMI v2

• RFC 1157/2271 SNMP


• RFC 1213/2011-2013 SNMP v2 MIB




• RFC 1901-1908/3416-3418 SNMP v2c

• RFC 2096 IP MIB

• RFC 2131 DHCP

• RFC 2570-2576/3410-3415 SNMP v3

• RFC 2616/2854 HTTP and HTML


• RFC 2668/3636 IEEE 802.3 MAU MIB





• RFC 4878 OA&M Functions on Ethernet-Like Interfaces

Security

• RFC 1321 MD5





• RFC 2267 Network Ingress Filtering



• RFC 3576 Dynamic Authorization Extensions to RADIUS

QoS



• RFC 2474/2475/2597/3168/3246 DiffServ

• RFC 2697 srTCM

• RFC 2698 trTCM


Others

• RFC 768 UDP


• RFC 792 ICMP






• RFC 951 BOOTP

• RFC 1151 RDP

• RFC 1191/1981 Path MTU Discovery




• RFC 1518/1519 CIDR

• RFC 1541/1542/2131/3396/3442 DHCP


• RFC 2131/3046/3315/4649/6221 DHCP/BOOTP Relay



• RFC 2338/3768/2787 VRRP and MIB

• RFC 3021 Using 31-bit Prefixes on IPv4 Point-to-Point Links

MPLS

• RFC 3031/3032/3343/4182 MPLS

• RFC 3035/3036/3037/5036 LDP


• RFC 3176 sFlow

• RFC 3478 LDP Graceful Restart

• RFC 4379 LSP Ping

• RFC 4562 MAC-Forced Forwarding

• RFC 4762 VPLS using LDP

OMNISWITCH 9000E ORDERING


BUNDLES

OS9700E-CB-A OmniSwitch 9700E Base Bundle (1 chassis, 2 PSUs and 1 CMM) for AC power

OS9702E-CB-A OmniSwitch 9702E Base Bundle (1 chassis, 2 PSUs and 1 CMM) for AC power, NEBS ready

OS9800E-CB-A OmniSwitch 9800E Base Bundle (1 chassis, 3 PSUs and 1 CMM) for AC power

OS9700E-RCB-A OmniSwitch 9700E Redundant Bundle (1 chassis, 3 PSUs and 2 CMMs) for AC power

OS9702E-RCB-A OmniSwitch 9702E Redundant Bundle (1 chassis, 3 PSUs and 2 CMMs) for AC power, NEBS ready

OS9800E-RCB-A OmniSwitch 9800E Redundant Bundle (1 chassis, 4 PSUs and 2 CMMs) for AC power

CHASSIS AND POWER SUPPLIES

OS9700-CHASSIS 10-slot chassis – 8 dedicated slots for any OmniSwitch 9000E NIs, 2 dedicated slots for OS9700E-CMM or OS9702E-CMM (management and switching fabric)

OS9702-CHASSIS 10-slot chassis – 8 dedicated slots for any OmniSwitch 9000E NIs, 2 dedicated slots for OS9700E-CMM or OS9702E-CMM (management and switching fabric) , NEBS ready

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. (February 2016)

OS9800-CHASSIS 18-slot chassis – 16 dedicated slots for any OmniSwitch 9000E NIs, 2 dedicated slots for OS9800E-CMM (management and switching fabric)

OS9-PS-0725A 725 W AC power supply for OmniSwitch 9000/9000E

OS9-PS-0600D 600 W DC power supply for OmniSwitch 9000/9000E

OS9-IP-SHELF PoE rack (4-slot) for OmniSwitch 9000 chassis. Rack to include a 600 W AC PSU (OS9-IPS-0600A)

OS9-IPS-0600A 600 W AC PoE PSU (100 V to 240 V) for use within OS9-IP-SHELF only

MANAGEMENT AND SWITCHING FABRIC MODULES

OS9700E-CMM OmniSwitch 9700E Chassis Management Module for use in the OmniSwitch 9700E/9702E chassis

OS9702E-CMM OmniSwitch 9702E Chassis Management Module for use in the OmniSwitch 9700E/9702E chassis

OS9800E-CMM OmniSwitch 9800E Chassis Management Module for use in the OmniSwitch 9800E chassis


NETWORK INTERFACE CARDS

OS9-XNI-U2E OmniSwitch 9000E Network Interface with 2 unpopulated ports of 10GBase-X (XFP MSA)

OS9-XNI-U12E OmniSwitch 9000E Network Interface with 12 unpopulated ports of 10GBase-X (SFP+)

OS9-GNI-U24E OmniSwitch 9000E Network Interface with 24 unpopulated ports of 1000Base-X MiniGBIC (SFP MSA)

OS9-GNI-C24E OmniSwitch 9000E Network Interface with 24 ports of 10/100/1000Base-T/TX (R-J45)

OS9-GNI-P24E OmniSwitch 9000 Network Interface with 24 ports of 10/100/1000Base-T/TX (RJ-45), PoE+ -capable

ADVANCED SOFTWARE

OS9-SW-IPSEC IPSec software license for OmniSwitch 9000E to enable support of IPSec for IPv6 routing protocols (RIPng/OSPFv3)

OS9-SW-MPLS MPLS software license for OmniSwitch 9000E to enable support of VPLS, LDP, advanced OA&M (LSP ping/traceroute) and static Fast Reroute

ACCESSORIES

OS9000-FTTC Low noise fan tray for the OmniSwitch 9700E/9702E/9800E chassis

Contact your reseller of Alcatel-Lucent Enterprise solutions for additional information on country-specific power cords and a complete list of our SFP and XFP transceivers and MRJ21 cables.

SERVICE AND SUPPORT WarrantyLimited warranty to the original owner of one year on hardware and 90 days on software.



ALCATEL-LUCENT OMNIACCESS 4X50 SERIES CONTROLLERSNEXT–GENERATION WIRELESS LAN CONTROLLERS

The Alcatel-Lucent OmniAccess® 4x50 series Wireless LAN (WLAN) Controller is a next-genera-tion networking platform, optimized for mobile application delivery to ensure the best mobility experience over Wi-Fi®.

With a new central processor that employs eight cores with four threads each, it is the equiva-lent of 32 virtual CPUs. As a result, the OmniAccess 4x50 WLAN series supports 32,000 mobile devices and performs stateful firewall policy enforcement at 40 Gb/s – plenty of capacity and speed for BYOD and devices compliant with IEEE 802.11ac.

New levels of visibility are provided by the unique Alcatel-Lucent AppRF technology. With AppRF, IT can see applications by user, including the top web-based applications like Facebook and Box.

The OmniAccess 4x50 WLAN series also manages authentication, encryption, VPN con-nections, IPv4 and IPv6 Layer 3 services, the Policy Enforcement Firewall™, Adaptive Radio Management™, and RFProtect™ spectrum analysis and wireless intrusion protection.

Clustering and centralized management enable the deployment of large networks with hundreds of Controllers with minimal staff. A master Controller can manage local Controllers, while OmniVista® network management provides enterprise-wide clarity and control through real-time monitoring, historical reportingand troubleshooting.

BENEFITS• Maintain uninterrupted network

operations

• Provide sufficient cooling and rapid time

to repair

• Provide maximum reliability and uptime

• Provide connections for high availability

FEATURES• The OA4550/OA4650/OA4750 supports

dual, field-replaceable redundant power supplies

• The OA4550/OA4650/OA4750 includes a field-replaceable fan tray with multiple fans, providing sufficient cooling and rapid time to repair.

• Solid state drives

• The OA4550/OA4650/OA4750 supports two dual-media ports: 1000Base-X or 10/100/1000Base-T

OAW-4550

OAW-4450

2

Alcatel-Lucent OmniAccess 4x50 Series ControllersALCATEL-LUCENT ENTERPRISE DATA SHEET

Interfaces and indicators • 4550/4650/4750 has four 10GBASE-X

(SFP+) ports

• 4450 has two 10GBASE-X and four dual-media (1000BASE-X or10/100/1000BASE-T) ports

• Two dual-media ports (1000BASE-X or 10/100/1000BASE-T)

• One USB 2.0

• Console (TIA/EIA-232) RJ-45 or mini-USB

• LINK/ACT and status LEDs

• Management/status LEDs

• LCD panel and navigation buttons

• Expansion slot (reserved for future use)

Physical characteristics• 4550,4650,4750

¬ Height: 4.4 cm (1.75 in)

¬ Width: 44.5 cm (17.5 in)

¬ Depth: 44.5 cm (17.5 in)

¬ Weight (with one AC power supply installed): 7.45 kg (16.43 lb)

• 4450

¬ Height: 4.4 cm (1.75 in)

¬ Width: 33.4 cm (13.1 in)

¬ Depth: 44.2 cm (17.4 in)

¬ Weight (with one AC power supply installed): 4.95 kg (10.19 lb)

Environmental characteristics• Operating:

¬ Temperature: 0°C to 40°C (+32°F to +104°F)

¬ Humidity: 5% to 95% non-condensing

• Storage and transportation:

¬ Temperature: -40°C to +70°C (-40°F to +158°F)

• Operating altitude: 3048 m (10,000 ft)

• Acoustic noise* (with AC power supply):

¬ OmniAccess 4450: 49.0 dBA




Power • 350 W AC power supply:

¬ AC input voltage: 100 V AC to 240 V AC

¬ AC input current: 5 A to 2.5 A

¬ AC input frequency: 50 Hz to 60 Hz

¬ Weight: 1.3 kg (2.8 lb)

• Maximum power consumption:

¬ OmniAccess 4450: 75.2 watts

¬ OmniAccess 4550: 110 W



¬ Maximum (using USB, no PoE): 8.0 W

¬ Maximum (using USB, full PoE): 26 W

Regulatory and safety complianceEMC/EMI

• United States: FCC Part 15 Class A CE

• Canada: Industry Canada Class A

• Japan: VCCI Class A

• Europe:

¬ EN 55022 Class A (CISPR 22 Class A)

¬ EN 55024

¬ EN 61000-3-3 Limits

¬ EN 61000-4-2 Electrostatic Discharge

¬ EN 61000-4-3 Radiated Immunity

¬ EN 61000-4-4 Fast Transients

¬ EN 61000-4-5 Surge Transients

¬ EN 61000-4-6 Conducted Immunity

¬ EN 61000-4-8 Power Frequency Magnetic Field

¬ EN 61000-4-11 Voltage Dips, Short Interruptions and Voltage Variations

• Australia/New Zealand: AS/NZS 3548

Safety:

• United States: UL 60950, EN60950

• Canada: CAN/CSA 22.2 #60950

• CE mark, cTUVus, CB, C-tick, Anatel, NOM, MIC

Regulatory SKU Information

• 4550: ARCN0100

• 4650: ARCN0101

• 4750: ARCN0102

• 4450: ARCN7205

Minimum AOS-W Release• 4550: 6.2.0.0

• 4650: 6.2.0.0

• 4750: 6.2.0.0

• 4450: 6.4.3.0

TECHNICAL SPECIFICATIONSPerformance and capacity

Table 1. Performance and capacity by model

FEATURES OMNIACCESS 4450 OMNIACCESS 4550 OMNIACCESS 4650 OMNIACCESS 4750

Maximum APs (licenses) 256 512 1024 2048

Maximum RAPs 256 512 1024 2048

Maximum concurrent devices 8,192 16,384 24,576 32,768

VLANs 2,048 4094 4094 4094

Concurrent GRE tunnels (System BSSIDs) 8,192 8192 16,384 32,768

Concurrent tunneled ports 4,096 8192 12,288 16,384

Concurrent IPSec sessions 4,096 16,384 24,576 32,768

Concurrent SSL fallback sessions 4,096 8192 8192 8192

Active firewall sessions (Concurrent sessions) 1,000,000 2,015,291 2,015,291 2,015,291

Wired throughput (large packets) 12 Gbps 20 Gb/s 40 Gb/s 40 Gb/s

*Sound power per ETSI 300 753 in accordance with ISO 7779

3

Alcatel-Lucent OmniAccess 4x50 Series ControllersALCATEL-LUCENT ENTERPRISE DATA SHEET



OMNIACCESS 4x50 series WLAN controllers

OAW-4450-RW Alcatel-Lucent OmniAccess 4450, two 10GBase-X (SFP+), one 350 W AC power supply, unrestricted regulatorydomain. These products are considered rest-of-world products and must not be deployed in the United Statesor Israel.

OAW-4450-US Alcatel-Lucent OmniAccess 4450, two 10GBase-X (SFP+), one 350 W AC power supply, restricted regulatorydomain – United States.

OAW-4450-IS Alcatel-Lucent OmniAccess 4450, two 10GBase-X (SFP+), one 350 W AC power supply, unrestricted regulatorydomain. restricted regulatorydomain - Israel.

OAW-4450-JP Alcatel-Lucent OmniAccess 4450, four 10GBase-X (SFP+), one 350 W AC power supply, restricted regulatorydomain - Japan.




OAW-4550 Alcatel-Lucent OmniAccess 4550, four 10GBase-X (SFP+), one 350 W AC power supply, unrestricted regulatory domain. These products are considered rest-of-world products and must not be deployed in the United States or Israel.

OAW-4550-IS Alcatel-Lucent OmniAccess 4550, four 10GBase-X (SFP+), one 350 W AC power supply, restricted regulatory domain - Israel.

OAW4550-US Alcatel-Lucent OmniAccess 4550, four 10GBase-X (SFP+), one 350 W AC power supply, restricted regulatory domain - United States.



OAW-4650-US Alcatel-Lucent OmniAccess 4650, four 10GBase-X (SFP+), one 350 W AC power supply, restricted regulatory domain – United States.



OAW-4750-US Alcatel-Lucent OmniAccess 4750, four 10GBase-X (SFP+), one 350 W AC power supply, restricted regulatory domain – United States.

OMNIACCESS 4x50 series WLAN controller accessories

PSU-350-AC OmniAccess field-replaceable power supply - 350 W for OAW 4X50

HW-4x50-FT Field-replaceable fan tray for OAW 4x50

SPR-ESBLNK Expansion slot blank panel for OAW 4x50

PSU-350-DC OmniAccess 350W DC (-48V DC) Power Supply. May be used as a redundant power supply or field-replaceable spare for 4x50 Series Mobility Controllers.

SFP-LX OmniAccess 1000BASE-LX SFP; 1310nm pluggable GbE optic; LC connector; up to 10,000 meters over single-mode fiber

SFP-SX OmniAccess 1000BASE-SX SFP; 850nm pluggable GbE optic; LC connector; up to 270 meters over multi-mode fiber (Type FDDI/OM1) and up to 550 meters over multi-mode fiber (Type OM2)

SFP-TX OmniAccess 1000BASE-T SFP; copper GbE pluggable; RJ45 connector; up to 100 meters over Category-5, 5e, 6 and 6a unshielded twisted pair cable

DAC-SFP-10GE50CM OmniAccess 50cm length, 10GbE SFP+ direct attach cable (DAC); copper Twinax connectors on both ends for interconnect between devices. For use with 4x50 10GbE ports only

DAC-SFP-10GE-1M OmniAccess 1m length, 10GbE SFP+ direct attach cable (DAC); copper Twinax connectors on both ends for interconnect between devices. For use with 4x50 10GbE ports only

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. (August 2015)




PSU-PWBLNK Blank face plate for unpopulated power supply intake for OAW 4x50

SPR-RK-MNT Rack mount kit for OAW 4x50

SPR-4RK-MNT Four corner rack mount for OAW 4x50

SPR-WL-MNT Wall mount kit for OAW 4x50 Series WLAN Controller

DAC-SFP10GE-50C 50 cm Direct Attach cable; 10G SFP+ (stacking and passive optics) for OAW 4X50

DAC-SFP10GE-xM “X” m Direct Attach cable; 10G SFP+ (stacking and passive optics) for OAW 4X50

SFP-10GE-SR OmniAccess SFP+ 10GBase-SR 850 nm serial pluggable SPF+ optic (LC), target range 300 m over MMF, LC Connector for OAW 4X50

SFP-10GE-LR OmniAccess SFP+ 10GBase-LR 1310 nm serial pluggable SFP+ optic (LC) for up to 10 km over SMF, LC Connector for OAW 4X50

SFP-10GE-LRM OmniAccess SFP+ 10Base-LRM 1310 nm serial pluggable SFP+ optic (LC) target range 300 m over MMF, LC Connector for OAW 4X50

Software licenses*

OAW-AP-LAP2048 OmniAccess WLAN Access Point License (2048 Access Points)

OAW-APPEFNG2048 OmniAccess WLAN Policy Enforcement Firewall (2048 AP License)

OAW-AP-RFP2048 OmniAccess WLAN RF Protect License including WIP and Spectrum (2048 AP support)

OAW-4550-PEFV OmniAccess WLAN Policy Enforcement Firewall for OAW 4550 controller (VIA/VPN users)




*All licenses for the OmniAccess 6000 Wireless LAN Switch are applicable to the OmniAccess 4X50 Series WLAN Controller as well.

Warranty• Hardware: 1 year parts/labor*

• Software: 90 days*

*Extended with support contract



ALCATEL-LUCENT OMNIACCESS 100 SERIES ACCESS POINTS DUAL RADIO 802.11N ACCESS POINTS

The multifunctional and affordable 100 series Access Points deliver enterprise-grade Wi-Fi to high-density client environments in offices, hospitals, schools, retail stores and warehouses.

These high-performance 802.11n APs deliver wireless data rates up to 300 Mbps per radio and ensure peak performance by utilizing channel bonding, block acknowledgement and MIMO radios. Advanced antenna technology also increases RF signal range and reliability.

The 105 series of APs features two 2x2 MIMO dual-band 2.4-GHz/5-GHz radios with two internal omni-directional downtilt antennas, which make it ideal for warehouses and other high-ceiling facilities. The 104 series of APs features the same radios with external antenna connectors.

BEST-IN-CLASS RF MANAGEMENT

All Alcatel-Lucent APs include Adaptive Radio Management™ technology, which is essential to creating the most reliable, high-performance WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and ensures that APs stay clear of RF interference.

The 100 series can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.

CHOOSE YOUR OPERATING MODE

The 100 series offers a choice of operating modes to meet your unique management and deployment requirements.

• Controller-managed mode: When managed by Alcatel-Lucent Mobility Controllers, 100 series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Please refer to the Alcatel-

Lucent Mobility Controller data sheets for more details.

• Alcatel-Lucent Instant™ mode: In Alcatel-Lucent Instant mode, a single AP is dynamically elected the Virtual Controller, which automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes

For large installations, the Alcatel-Lucent Product Activation Service dramatically reduces deployment time by automating Alcatel-Lucent Instant provisioning, firmware upgrades and inventory management. APs are factory-shipped to your deployment site and configure themselves when powered up.

If WLAN and network requirements change, a built-in migration path allows 100 series Instant APs to become part of a WLAN that is centrally managed by a Mobility Controller.

RF Management • Spectrum analysis remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference. This provides visibility into non-802.11 RF interference sources and their effect on 802.11n channel quality.

Security

• With an OpenDNS service subscription, Alcatel-Lucent Instant delivers integrated web filtering, malware and botnet protection to every device connected to the WLAN

• Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

• SecureJack-capable for secure tunneling of wired Ethernet traffic Operating Modes • 802.11a/b/g/n Alcatel-Lucent Instant AP • 802.11a/b/g/n Mobility Controller-managed AP • Air monitor (AM) • Secure enterprise mesh • Remote AP (RAP) when used with a Mobility Controller • Spectrum analyzer when used with a Mobility Controller Wireless Radio Specifications • AP type: Dual-radio, dual-band 802.11n indoor • Software-configurable dual radio supports 2.4 GHz and 5 GHz • 2x2 MIMO 802.11n with two spatial streams and up to

300 Mbps per radio • Supported frequency bands (country-specific restrictions apply): - 2.400 to 2.4835 GHz - 5.150 to 5.250 GHz - 5.250 to 5.350 GHz - 5.470 to 5.725 GHz - 5.725 to 5.875 GHz

• Available channels: Managed by Virtual Controller or Mobility Controller, dependent upon configured regulatory domain

• Controller-managed, dependent upon configured regulatory domain • Dynamic frequency selection (DFS) optimizes the use of

available RF spectrum • Supported radio technologies:

- 802.11b: Direct-sequence spread-spectrum (DSSS) - 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM) - 802.11n: 2x2 MIMO with two spatial streams

• Supported modulation types: - 802.11b: BPSK, QPSK, CCK - 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM • Transmit power: Configurable in increments of 0.5 dBm • Maximum transmit power: - 2.4GHz: 23 dBm (limited by local regulatory requirements) - 5 GHz: 23 dBm (limited by local regulatory requirements) • Maximum ratio combining (MRC) for improved receiver performance • Cyclic Delay Diversity for improved downlink RF performance • Space time blocking code (STBC) for increased range and

improved reception • Association rates (Mbps): - 802.11b: 1, 2, 5.5, 11 - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 - 802.11n: MCS0 - MCS15 (6.5 Mbps - 300 Mbps) • 802.11n high-throughput (HT) Support: HT 20/40 • 802.11n packet aggregation: A-MPDU, A-MSDU

Power • 48 V DC 802.3af PoE • 12 V DC for external AC supplied power (adapter sold separately) • Maximum power consumption: 12.5 watts

Antenna • RF interconnect attenuation (between radio and connectors or antennas): 0.5dB • AP104 and IAP104: Two RP-SMA connectors for external dual-band antennas • AP105 and IAP105: Four integrated downtilt omni-directional antennas for 2x2 MIMO with maximum antenna gain: - 2.4GHz / 3.0dBi - 5GHz / 4.5dBi Interfaces • Network: One 10/100/1000BASE-T Ethernet (RJ-45),

auto-sensing link speed and MDI/MDX • Power: One DC power connector • Other: One RJ-45 console interface Mounting • Included with AP: - Molded mounting tabs for attaching to 15/16” T-bar

drop-tile ceiling - Slotted tabs for screw mounting to a wall, ceiling or other

flat surface • Optional mounting kit:

- OAW-AP105-MNT: OmniAccess AP104/105 Wall/Ceiling Mounting Kit. - OAW-AP105-MNTD: OmniAccess AP105 Access Point Mounting Kit

(contains 2 brackets for flat surface or wall box mounting; DC power

connector accessible) - OAW-AP105-MNTC: OmniAccess AP104/105 Ceiling Mounting Kit (rail

adapters only) Mechanical • Dimensions/weight (unit): - 132 mm x 135 mm x 45 mm (5.2” x 5.3” x 1.8“) - 0.3 kg (10.56 oz) • Dimensions/weight (shipping): - 195 mm x 170 mm x 55 mm (7.7” x 6.7” x 2.2“) - 0.44 kg (15.52 oz) Environmental • Operating: - Temperature: 0° C to 50° C (+32° F to +122° F) - Humidity: 5 to 95% non-condensing • Storage and transportation temperature range: - Temperature: -40° C to +70° C (-40° F to +15 8° F) Regulatory • FCC/Industry of Canada • CE Marked • R&TTE Directive 1995/5/EC • Low Voltage Directive 72/23/EEC • EN 300 328 • EN 301 489 • EN 301 893 • UL/IEC/EN 60950 • EN 60601-1-1, EN60601-1-2

Certifications • CB Scheme Safety, cTUVus • UL2043 Plenum rating • Wi-Fi certified 802.11a/b/g/n

Warranty

• Limited lifetime warranty

Minimam AOS version

• AP104: AOS 6.1.3.0 on an Alcatel-Lucent Mobility Controller • AP105: AOS 3.4.1.0 on an Alcatel-Lucent Mobility Controller

Alcatel-Lucent OmniAccess 100 Series Access Points ALCATEL-LUCENT DATASHEET 2

100 SERIES AP RF PERFORMANCE TABLE

Maximum capability of the hardware provided. Maximum transmit power will be limited by local regulatory settings.

Max TX powerper active TX

chain

(dBm)

RX Sensitivity

(dBm)

Max TX power per active TX

chain

(dBm)

RX Sensitivity

(dBm)

2.4 GHz 5 GHz

802.11b

1Mbps 20 -96

2Mbps 20 -96

5.5Mbps 20 -94

11Mbps 20 -93

802.11a/g

6Mbps 20 -96 20 -96

9Mbps 20 -96 20 -96

12Mbps 20 -96 20 -96

18Mbps 20 -95 20 -95

24Mbps 20 -92 20 -91

36Mbps 19 -89 19 -88

48Mbps 18 -85 18 -84

54Mbps 17 -83 17 -83

802.11n HT20

MCS0 20 -96 20 -96

MCS1 20 -95 20 -94

MCS2 20 -93 20 -92 MCS3 20 -90 20 -89

MCS4 19 -87 19 -86

MCS5 18 -82 18 -82

MCS6 17 -81 17 -80

MCS7 15 -80 15 -79

MCS8 20 -95 20 -95

MCS9 20 -93 20 -92

MCS10 20 -91 20 -90

MCS11 20 -87 20 -87

MCS12 19 -84 19 -84

MCS13 18 -81 18 -80

MCS14 17 -80 17 -78

MCS15 15 -77 15 -77

802.11n HT40

MCS0 20 -93 20 -92

MCS1 20 -93 20 -92

MCS2 20 -90 20 -89

MCS3 20 -86 20 -86

MCS4 19 -83 19 -83

MCS5 18 -79 18 -80

MCS6 17 -77 17 -77

MCS7 15 -76 15 -76

MCS8 20 -92 20 -92

MCS9 20 -89 20 -90

MCS10 20 -87 20 -87

MCS11 20 -84 20 -84

MCS12 19 -82 19 -81

MCS13 18 -76 18 -77

MCS14 17 -76 17 -75

MCS15 15 -73 15 -73


AP105 and IAP105 ANTENNA PATTERN PLOTS

Y Y

X X

2.45 GHz

Horizontal (azimuth) plane Vertical (elevation) plane

5.5 GHz

Horizontal (azimuth) plane Vertical (elevation) plane


ORDERING INFORMATION PART NUM BER DESCRI PTI ON

OAW-IAP105 OmniAccess IAP105 wireless AP, dual-radio IEEE 802.11a/b/g/n wireless AP with support for 802.11B/G/N and 802.11A /N operation, dual-band integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports 802.3af PoE), 1 x 12-V DC power interface; AC power adapter kit (OAW-AP-AC-UN) sold separately

OAW-IAP104 OmniAccess AP104 Wireless AP (802.11abgn 2x2:2, dual radio, antenna connectors) - need external antenna

OAW-AP105

OmniAccess IAP105 wireless access point. Dual radio IEEE 802.11a/b/g/n wireless access point with support for 802.11B/G/N and 802.11A/N operation, dual-band integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af Power over Ethernet), 1 x 12V DC power interface. AC power adapter kit (OAW-AP-AC-UN) sold separately

OAW-AP104 OmniAccess AP104 Wireless Access Point (802.11abgn 2x2:2, dual radio, antenna connectors) - need external antenna

OAW-AP-AC-UN Universal AC Power Adapter Kit for OmniAccess AP and IAP 105, 104, 92, 92 - North America, Japan, United Kingdom, Italy, EC (Shuko), Australia, China, India, Korea.

OAW-AP105-MNT OmniAccess AP105 Wall/Ceiling Mounting Kit

OAW-AP105-MNTC OmniAccess AP105 Ceiling Mounting Kit (rail adapters only)

OAW-AP105-MNTD OmniAccess AP105 Access Point Mounting Kit (contains 2 brackets for flat surface or wall box mounting; DC power connector accessible)

www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the propert y of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2012 Alcatel-Lucent. All rights reserved.

ALCATEL-LUCENT OMNIACCESS 103 SERIES ACCESS POINTSCOST-EFFECTIVE DUAL-BAND COVERAGE IN LOW-DENSITY ENTERPRISE WI-FI

Alcatel-Lucent OmniAccess 103 series wireless access points (APs) maximize mobile device performance in low-density Wi-Fi environments while minimizing interference from cellular networks.

These compact and cost-effective APs deliver wireless data rates up to 300 Mb/s per radio, employing 802.11n technology with two spatial MIMO streams.

The OmniAccess AP103 and Instant IAP103 models feature a 2.4-GHz and a 5-GHz radio, each with 2x2:2 MIMO and two integrated omnidirectional down-tilt antennas per radio.

To eliminate sticky client behavior while users roam, the OmniAccess 103 series APs feature ClientMatch™ technology, which continuously gathers session performance metrics from mobile devices. If a mobile device moves away from an AP or if RF interference impedes perfor-mance, ClientMatch automatically steers the device to a better AP.

FEATURES• Advanced Cellular Coexistence (ACC)

¬ Enables WLANs to perform at peak efficiency by minimizing interference from 3G/4G LTE networks, distributed antenna systems and commercial small cell/femtocell equipment

• Adaptive Radio Management™ technology

¬ Manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and ensures that APs stay clear of RF interference

• Configuration for part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.

• Spectrum analysis

¬ Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference

• Security

¬ With an OpenDNS service subscription, Alcatel-Lucent Instant RAPs deliver integrated web filtering, malware and botnet protection to every device connected to the WLAN

¬ Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

¬ SecureJack for secure tunneling of wired Ethernet traffic

BENEFITS• Multifunctional and affordable

• Improved client performance

• Interference free performance

• Best-in-class RF management

2

Alcatel-Lucent OmniAccess 103 Series Access PointsALCATEL-LUCENT ENTERPRISE DATA SHEET

OPERATING MODESOmniAccess 103 series APs offer a choice of operating modes to meet your unique management and deployment requirements.

Controller-managed modeWhen managed by Alcatel-Lucent Mobility Controllers, the OmniAccess AP103 offers centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding.

Alcatel-Lucent Instant™ modeIn Alcatel-Lucent Instant mode, a single OmniAccess IAP103 automatically distributes the network configuration to other Instant APs in the WLAN. If WLAN and network requirements change, a built-in migration path allows Alcatel-Lucent Instant APs to become part of a WLAN that is centrally managed by a Mobility Controller.

TECHNICAL SPECIFICATIONSOperating modes

• 802.11a/b/g/n Alcatel-Lucent Instant AP

• 802.11a/b/g/n Mobility Controller-managed AP

• Air monitor (AM) for wireless IDS, rogue detection and containment

• Spectrum analyzer

• Secure enterprise mesh

• Remote AP (RAP) when used with a Mobility Controller

Wireless radio specifications• AP type: Indoor, dual radio, 5-GHz and

2.4-GHz 802.11n 2x2:2

• Software-configurable dual radio supports 5-GHz (Radio 0) and 2.4-GHz (Radio 1)

• 2x2 MIMO with two spatial streams and up to 300 Mb/s wireless data rate

• Supported frequency bands (country-specific restrictions apply):

¬ 2.4000 GHz to 2.4835 GHz

¬ 5.150 GHz to 5.250 GHz

¬ 5.250 GHz to 5.350 GHz

¬ 5.470 GHz to 5.725 GHz

¬ 5.725 GHz to 5.850 GHz

• Available channels: Dependent on configured regulatory domain

• Dynamic frequency selection (DFS) optimizes the use of available RF spectrum

• Supported radio technologies:

¬ 802.11b: Direct-sequence spread-spectrum (DSSS)

¬ 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)

• Supported modulation types:

¬ 802.11b: BPSK, QPSK, CCK

¬ 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

• Transmit power: Configurable in increments of 0.5 dBm

• Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):

¬ 2.4-GHz band: +21 dBm (18 dBm per chain)

¬ 5-GHz band: +21 dBm (18 dBm per chain)

• Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks

• Maximum ratio combining (MRC) for improved receiver performance

• Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance

• Short guard interval for 20-MHz and 40-MHz channels

• Space-time block coding (STBC) for increased range and improved reception

• Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

• Supported data rates (Mb/s):

¬ 802.11b: 1, 2, 5.5, 11

¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

¬ 802.11n: 6.5 to 300 (MCS0 to MCS15)

• 802.11n High-throughput (HT) support: HT 20/40

• 802.11n Packet aggregation: Aggregated MAC protocol data unit (A-MPDU), Aggregated MAC-level service data unit (A-MSDU)

Power• Maximum power consumption:

9.5 W (POE) or 8 W (DC)

• Power sources sold separately

• Direct DC source: 12 V DC nominal, ±5%

• Power over Ethernet (PoE): 48 V DC (nominal) 802.3af or 802.3at-compliant source

Antennas• Four integrated down-tilt omnidirectional

antennas for 2x2 MIMO with maximum antenna gain of 3.9 dBi at 2.44 GHz, 4.1 dBi at 5.2 GHz and 4.3 dBi at 5.8 GHz. Built-in antennas are optimized for horizontal ceiling-mounted orientation of the AP.

Other interfaces• 10/100/1000Base-T Ethernet network

interface (RJ-45)

¬ Auto-sensing link speed and MDI/MDX

¬ 802.3az Energy Efficient Ethernet (EEE)

¬ PoE-PD: 48 V DC (nominal) 802.3af PoE or 802.3at PoE+

• DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length

• Serial console interface (proprietary; optional adapter cable available)

• Visual indicators (LEDs):

¬ Power/system status

¬ Ethernet link status (ENET)

¬ Radio status (two; RAD0, RAD1)

• Kensington security slot

• Reset button

Mounting• Included with AP:

¬ Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling

• Optional mounting kits:

¬ OAW-AP220-MNTC2: OmniAccess AP220 Series Access Point Mount Kit (ceiling grid). Contains 2 x ceiling grid rail adapters (for Interlude and Silhouette style rails)

¬ OAW-AP220-MNTW1: OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface). Contains 1 x flat surface wall/ceiling mount bracket

Physical dimensions• Unit (excluding mounting accessories):

¬ Width: 150 mm (5.9 in)

¬ Depth: 150 mm (5.9 in)

¬ Height: 41.5 mm (1.63 in)

¬ Weight: 300 g (0.66 lb)

• Shipping:

¬ Width: 192 mm (7.6 in)

¬ Depth: 178 mm (7.0 in)

¬ Height: 68 mm (2.68 in)

¬ Weight: 500 g (1.10 lb)

Environmental• Operating:

¬ Temperature: 0°C to +40°C (+32°F to +104°F)




3


Regulatory• FCC/Industry Canada (IC)

• CE Marked

• R&TTE Directive 1995/5/EC

• Low Voltage Directive 72/23/EEC

• EN 300 328

• EN 301 489

• EN 301 893

• UL/IEC/EN 60950

• EN 60601-1-1 and EN 60601-1-2

For more country-specific regulatory information and approvals, please see your Alcatel-Lucent representative.

Regulatory model numberOAW-AP103 and OAW-IAP103: APIN0103

Certifications• CB Scheme Safety, cTUVus

• Wi-Fi Alliance (WFA) certified 802.11a/b/g/n

Warranty• Alcatel-Lucent limited lifetime warranty

Minimum operating system software versions

• AOS™ 6.4.0

• Alcatel-Lucent InstantOS™ 4.1.0.0 (planned availability mid-2014)

Table 1. RF performance

MAXIMUM TRANSMIT POWER (DBM) PER TRANSMIT CHAIN RECEIVER SENSITIVITY (DBM) PER RECEIVE CHAIN

2.4 GHZ

IEEE 802.11B

1 Mb/s 18 -93

11 Mb/s 18 -91

IEEE 802.11g

6 Mb/s 18 -88

54 Mb/s 16 -76

IEEE 802.11n Ht20

MCS0/8/16 18 -88

MCS7/15/23 14 -73

IEEE 802.11n Ht40

MCS0/8/16 18 -86

MCS7/15/23 14 -70

5 GHZ

IEEE 802.11a

6 Mb/s 18 -92

54 Mb/s 16 -76

IEEE 802.11n Ht20

MCS0/8/16 18 -92

MCS7/15/23 14 -73

IEEE 802.11n Ht40

MCS0/8/16 18 -89

MCS7/15/23 14 -69

Maximum capability of the hardware provided. Maximum transmit power is limited by local regulatory settings.

4


Figure 1. OmniAccess AP103 and IAP103 antenna pattern plots

2.450 12.450 2

Horizon or Azimuth plane (top view)

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

2.450 GHz

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

5.550 GHz

2.450 12.450 2

Elevation plane (side view, 0-degree angle)

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

2.450 GHz

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

5.550 GHz

2.450 12.450 2

Elevation plane (side view, 90-degree angle)

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

2.450 GHz

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

5.550 GHz

enterprise.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2014 Alcatel-Lucent. All rights reserved. 201411170016EN (November)



AP103 SERIES ACCESS POINTS

OAW-AP-103 OmniAccess AP103 wireless access point. Dual radio IEEE 802.11a/b/g/n wireless access point with support for IEEE 802.11 ‘B/G/N’ and IEEE 802.11’A/N’ operation, dual-band integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports IEEE 802.3af Power over Ethernet), 1 x 12 V DC power interface, Console port (pin header)

OAW-IAP-103-RW OmniAccess Instant AP103 wireless access point. Dual radio IEEE 802.11a/b/g/n wireless access point with support for IEEE 802.11 ‘B/G/N’ and IEEE 802.11 ‘A/N’ operation, dual-band integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports IEEE 802.3af Power over Ethernet), 1 x 12 V DC power interface, Console port (pin header). Restricted regulatory domain: Rest of world

OAW-IAP-103-US OmniAccess Instant AP103 wireless access point. Dual radio IEEE 802.11a/b/g/n wireless access point with support for IEEE 802.11 ‘B/G/N’ and IEEE 802.11 ‘A/N’ operation, dual-band integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports IEEE 802.3af Power over Ethernet), 1 x 12 V DC power interface, Console port (pin header). Restricted regulatory domain: United States

OAW-IAP103-IS OmniAccess W-IAP103 Wireless Instant Access Point, 802.11n, 2x2:2, dual radio, integrated antennas - Restricted regulatory domain: Israel

OAW-IAP103-JP OmniAccess W-IAP103 Wireless Instant Access Point, 802.11n, 2x2:2, dual radio, integrated antennas - Restricted regulatory domain: Japan

MOUNTING ACCESSORIES

OAW-AP220-MNTW2 OmniAccess AP220 Series Access Point Mount Kit (box style, secure, flat surface). Contains 1x flat surface wall/ceiling secure mount cradle.

OAW-AP220-MNTC2 OmniAccess AP220 Series Access Point Mount Kit (ceiling grid). Contains 2 x ceiling grid rail adapters (for Interlude and Silhouette style rails).

OAW-AP220-MNTW1 OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface). Contains 1 x flat surface wall/ceiling-mount bracket.

GENERIC INDOOR AP ACCESSORIES

OAW-AP-AC-UN 12 V/18 W Indoor Access Point AC power adapter. Universal, ships with 8 country-specific plug inserts (US, EU, UK, Australia, China, Korea, Argentina, Brazil)

OAW-AP-AC-12V18 OmniAccess12 V DC/18 W AC Power Adapter for compatible indoor AP models. Does not include country-specific power cord

OAW-MS-3501G 1 Port IEEE 802.3af PoE Midspan 10/100/1000 15.4 W. No power cord included


ALCATEL-LUCENT OMNIACCESS 110 SERIES ACCESS POINTSOPTIMIZE CLIENT PERFORMANCE IN HIGH-DENSITY WI-FI ENVIRONMENTS

The multifunctional and affordable Alcatel-Lucent OmniAccess™ 110 series wireless access points (APs) maximize mobile device performance in high-density Wi-Fi® environments while minimizing interference from Long Term Evolution (LTE) cellular networks.

These high-performance 802.11n APs deliver wireless data rates up to 450 Mb/s per radio and employ three spatial streams to support 50 percent more throughput and mobile devices than previous generation APs.

The AP115 and IAP115 APs feature a 2.4-GHz and a 5-GHz radio, each with 3x3:3 multiple-input multiple-output (MIMO), and three integrated omnidirectional down-tilt antennas. The AP114 and IAP114 models feature the same radios with three combined and diplexed external antenna connectors.

FEATURES Advanced Cellular Coexistence (ACC)The 110 series ACC feature minimizes interference from 3G/4G LTE networks, distributed antenna systems and commer-cial small cell/femto cell equipment.

ClientMatchWhile users roam, ClientMatch™ eliminates the sticky client behavior by continuously gathering the session performance metrics from mobile devices. If a mobile device moves out of range of an AP, or if radio frequency (RF) interference impedes performance, ClientMatch automatically steers the device to a better AP.

Adaptive Radio Management (ARM)ARM manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and to ensure that APs stay clear of RF interference. ARM also provides the best-in-class RF management, which is essential to creating the most reliable, high-performance wireless LANs (WLANs).

BENEFITS• The 110 series ACC feature enables

Alcatel-Lucent WLANs to perform at peak efficiency by minimizing interference with 3G/4G networks.

• Wi-Fi client performance and the WLAN network performance are optimized by eliminating sticky client behavior.

The 110 series can be configured to pro-vide part-time or dedicated air monitoring for spectrum analysis and wireless intru-sion protection, virtual private network (VPN) tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.

2


Operating modesThe 110 series of APs offer a choice of operating modes to meet unique manage-ment and deployment requirements.

• Controller-managed mode. When managed by OmniAccess controllers, 110 series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding.

• Alcatel-Lucent Instant™ mode. In Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power up one Instant AP, configure it over the air, and plug in the other APs — the entire process takes about five minutes.

If WLAN and network requirements change, a built-in migration path allows 110 series Instant APs to become part of a WLAN that is centrally managed by a mobility controller.

• 802.11a/b/g/n controllerless Instant AP

• 802.11a/b/g/n mobility controller managed AP

• Remote AP (RAP)

• Spectrum analysis identifies sources of RF interference

• Air monitor provides wireless intrusion protection

• Hybrid AP serves Wi-Fi clients and provides wireless intrusion protection and spectrum analysis


Security• With an OpenDNS service subscription

OmniAccess Instant RAPs deliver integrated web filtering, malware and botnet protection to every device connected to the WLAN.


• SecureJack-capable for secure tunneling of wired Ethernet traffic

Wireless radio specifications• AP type: Indoor, dual radio, 5 GHz and

2.4 GHz 802.11n 3x3:3

• Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)

• 3x3 MIMO with three spatial streams and up to 450 Mb/s wireless data rate


¬ 2.4000 GHz to 2.4835 GHz

¬ 5.150 GHz to 5.250 GHz

¬ 5.250 GHz to 5.350 GHz

¬ 5.470 GHz to 5.725 GHz

¬ 5.725 GHz to 5.850 GHz




¬ 802.11b: Direct sequence spread spectrum (DSSS)

¬ 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)



¬ 802.11a/g/n: BPSK, QPSK, 16 QAM, 64 QAM



¬ 2.4 GHz band: +28 dBm (23 dBm per chain)

¬ 5 GHz band: +25 dBm (20 dBm per chain)

• ACC minimizes interference from LTE cellular networks



• Short guard interval for 20 MHz and 40 MHz channels




¬ 802.11b: 1, 2, 5.5, 11

¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

¬ 802.11n: 6.5 to 450 (MCS0 to MCS23)

• 802.11n high-throughput (HT) support: HT 20/40

• 802.11n packet aggregation: A-MPDU, A-MSDU

Power• Maximum power consumption: 13 W,

plus up to 2.5 W for attached USB device


• Direct DC source: 12 V DC nominal, +/-5%

• Power over Ethernet (PoE): 48 V DC (nominal) 802.3af or 802.3at-compliant source

¬ USB host port is disabled when using an 802.3af PoE power source. For unrestricted operation with PoE power, use an 802.3at-compliant source.

Antennas• OAW-AP114: Three RP-SMA connectors

for external dual-band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.5 dB in 2.4 GHz and 2.5 dB in 5 GHz

• OAW-AP115: Six integrated omnidirectional down-tilt antennas for 3x3 MIMO with maximum antenna gain of 4.5 dBi in 2.4 GHz and 5.5 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of AP115.

Other interfaces• 10/100/1000Base-T Ethernet network

interface (RJ-45)

¬ Auto-sensing link speed and medium dependent interface/medium dependent interface crossover (MDI/MDIX)


¬ PoE-PD: 48 V DC 802.3af PoE or 802.3at PoE+

• DC power interface, accepts 1.7/4.0 mm center-positive circular plug with 9.5 mm length

• USB 2.0 host interface (Type A connector)

• Serial console interface (RJ-45, TTL levels)




¬ Radio status (2x; RAD0, RAD1)


• Reset button


¬ Mounting brackets (2) for attaching to 9/16 in. or 15/16 in. T-bar drop-tile ceiling


¬ OAW-AP220-MNTC2: OmniAccess™ AP220 Series Access Point Mount Kit (ceiling grid) contains 2x ceiling grid rail adapters (for Interlude and Silhouette style rails).

¬ OAW-AP220-MNTW1: OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface) contains 1x flat surface wall/ceiling mount bracket.

¬ OAW-AP220-MNTW2: OmniAccess AP220 Series Access Point Mount Kit (box style, secure, flat surface) contains 1x flat surface wall/ceiling secure mount cradle.

3


Mechanical• Dimensions/weight (unit, excluding

mount accessories):

¬ W x D x H: 180 mm x 180 mm x 45 mm (7.09 in. x 7.09 in. x 1.77 in.)

¬ 650 g (1.43 lb)

• Dimensions/weight (shipping):

¬ W x D x H: 220 mm x 225 mm x 55 mm (8.66 in. x 8.86 in. x 2.17 in.)

¬ 880 g (1.94 lb)


¬ Temperature: 0°C to +50°C (32°F to +122°F)


• Storage and transportation temperature range:

¬ -40°C to +70°C (-40°F to +158°F)

Regulatory• FCC/Industry of Canada

• CE Mark



• EN 300 328

• EN 301 489

• EN 301 893

• UL/IEC/EN 60950

• EN 60601-1-1, EN60601-1-2


Regulator model numbers• OAW-AP114 and OAW-IAP114: APIN0114

• OAW-AP115 and OAW-IAP115: APIN0115


• UL2043 plenum rating

• Wi-Fi Alliance (WFA) certified 802.11a/b/

Warranty• Limited lifetime warranty

Minimum software versions • AOS-W 6.3.1.0

• InstantOS™ 4.0.0.0


MAX. TRANSMIT POWER PER TRANSMIT CHAIN (DBM)

RECEIVE SENSITIVITY PER TRANSMIT CHAIN (DBM)

MAX. TRANSMIT POWER PER TRANSMIT CHAIN (DBM)

RECEIVE SENSITIVITY PER TRANSMIT CHAIN (DBM)

2.4 GHZ 5 GHZ

802.11B

1 Mb/s 23 -97 — —

11 Mb/s 23 -88 — —

802.11A/G

6 Mb/s 21 -93 20 -92

54 Mb/s 18 -76 16 -74

802.11N HT20

MCS0/8/16 20 -93 19 -92

MCS7/15/23 16 -73 14 -71

802.11N HT40

MCS0/8/16 20 -90 19 -88

MCS7/15/23 16 -69 14 -67

Maximum capability of the hardware provided. Maximum transmit power is limited by local regulatory settings. RF performance numbers for the AP114 are slightly lower due to additional internal RF circuitry.

4


Figure 1. AP115 antenna pattern plots

0345

330

315

300

285

270

255

240

225

210195

030

2.450 1

2.450 2

2.450 3

2.450 1

2.450 2

2.450 3

2.450 GHz 5.550 GHz

-30-25

-20

-15-10

-5

0

5

-35-40

45

60X

Y90

105

120

135

150165

180

75

0345

330

315

300

285

270

255

240

225

210195

030

-30-25-20

-15-10

-5

0

5

-35

-40

45

60X

Y90

105

120

135

150165

180

75

2.450 1

2.450 2

2.450 3

2.450 1

2.450 2

2.450 3

0345

330

315

300

285

270

255

240

225

210195

030

2.450 GHz 5.550 GHz

-30

-25

-20

-15-10

-5

0

5

-35-40

45

60

Z

Y90

105

120

135

150165

180

75

0345

330

315

300

285

270

255

240

225

210195

030

-30-25

-20

-15-10

-5

0

5

-35-40

45

60

90

105

120

135

150165

180

75

Z

Y

a. Horizontal or azimuth plane (top view)

b. Elevation plane (side view)




110 SERIES APS

OAW-AP114 OmniAccess AP114 wireless access point. Dual radio 3x3:3 IEEE 802.11a/b/g/n wireless access point with support for 802.11‘B/G/N’ and 802.11‘A/N’ operation, RP-SMA external antenna connectivity, 1 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports 802.3af PoE or 802.3at PoE+), 1 x 12 V DC power interface, security slot

OAW-IAP114 OmniAccess Instant AP114 wireless access point. Dual radio 3x3:3 IEEE 802.11a/b/g/n wireless access point with support for 802.11‘B/G/N’ and 802.11‘A/N’ operation, RP-SMA external antenna connectivity, 1 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports 802.3af PoE or 802.3at PoE+), 1 x 12 V DC power interface, security slot. Rest of the world (not to be used in the United States, Japan, or Israel)

OAW-IAP114-US OmniAccess Instant AP114 wireless access point. Dual radio 3x3:3 IEEE 802.11a/b/g/n wireless access point with support for 802.11‘B/G/N’ and 802.11‘A/N’ operation, RP-SMA external antenna connectivity, 1 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports 802.3af PoE or 802.3at PoE+), 1 x 12 V DC power interface, security slot. Restricted regulatory domain: United States

OAW-IAP114-IS OmniAccess Instant AP114 wireless access point. Dual radio 3x3:3 IEEE 802.11a/b/g/n wireless access point with support for 802.11’B/G/N’ and 802.11’A/N’ operation, RP-SMA external antenna connectivity, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af POE or 802.3at POE+), 1 x 12V DC power interface, Security slot. Restricted regulatory domain: Israel.

OAW-IAP114-JP OmniAccess Instant AP114 wireless access point. Dual radio 3x3:3 IEEE 802.11a/b/g/n wireless access point with support for 802.11’B/G/N’ and 802.11’A/N’ operation, RP-SMA external antenna connectivity, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af POE or 802.3at POE+), 1 x 12V DC power interface, Security slot. Restricted regulatory domain: Japan.

OAW-AP115 OmniAccess AP115 wireless access point. Dual radio 3x3:3 IEEE 802.11a/b/g/n wireless access point with support for 802.11‘B/G/N’ and 802.11‘A/N’ operation, dual-band integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports 802.3af PoE or 802.3at PoE+), 1 x 12 V DC power interface, security slot

OAW-IAP115 OmniAccess Instant AP115 wireless access point. Dual radio 3x3:3 IEEE 802.11a/b/g/n wireless access point with support for 802.11‘B/G/N’ and 802.11‘A/N’ operation, dual-band integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports 802.3af PoE or 802.3at PoE+), 1 x 12 V DC power interface, security slot. Rest of the world (not to be used in the United States, Japan, or Israel)

OAW-IAP115-US OmniAccess Instant AP115 wireless access point. Dual radio 3x3:3 IEEE 802.11a/b/g/n wireless access point with support for 802.11‘B/G/N’ and 802.11‘A/N’ operation, dual-band integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports 802.3af PoE or 802.3at PoE+), 1 x 12 V DC power interface, security slot. Restricted regulatory domain: United States

OAW-IAP115-IS OmniAccess Instant AP115 wireless access point. Dual radio 3x3:3 IEEE 802.11a/b/g/n wireless access point with support for 802.11’B/G/N’ and 802.11’A/N’ operation, dual-band integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af POE or 802.3at POE+), 1 x 12V DC power interface, Security slot. Restricted regulatory domain: Israel.

OAW-IAP115-JP OmniAccess Instant AP115 wireless access point. Dual radio 3x3:3 IEEE 802.11a/b/g/n wireless access point with support for 802.11’B/G/N’ and 802.11’A/N’ operation, dual-band integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af POE or 802.3at POE+), 1 x 12V DC power interface, Security slot. Restricted regulatory domain: Japan.


OAW-AP220-MNTC2 OmniAccess AP220 Series Access Point Mount Kit (ceiling grid). Contains 2x ceiling grid rail adapters (for Interlude and Silhouette style rails)

OAW-AP220-MNTW1 OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface). Contains 1x flat surface wall/ceiling mount bracket

OAW-AP220-MNTW2 OmniAccess AP220 Series Access Point Mount Kit (box style, secure, flat surface). Contains 1x flat surface wall/ceiling secure mount cradle


OAW-AP-AC-UN Universal AC Power Adapter Kit for OmniAccess APs and IAPs For North America, Japan, United Kingdom, Italy, EC (Shuko), Australia, China, India, and Korea

OAW-AP-AC-12V18 OmniAccess 12 V DC/18 W AC power adapter for compatible indoor AP models. Does not include country-specific power cord

OAW-MS-3501G 1-port 802.3af PoE Midspan 10/100/1000 15.4 W. No power cord included

PD-9001GR-AC OAW WLAN 1-port 802.3at PoE Midspan 10/100/1000 30 W. U.S. power cord included. Rest of the world – all power cords must be ordered separately.

Antennas Go to the Alcatel-Lucent website for information on antenna part numbers.


ALCATEL-LUCENT OMNIACCESS 130 SERIES ACCESS POINTS DUAL RADIO 802.11N 3X3:3 ACCESS POINTS

The multifunctional 130 series wireless access points (APs) maximize mobile device performance in extremely high density Wi-Fi environments and ensure strong threat protection using integrated MACSec security.

These ultra-high-performance 802.11n APs deliver wireless data rates up to 450 Mbps per radio and employ three spatial streams to support 50% more throughput and mobile devices than previous-generation APs.

MACSec authentication and encryption on Ethernet ports enable secure AP deployment by interoperating with the MACSec capability on Alcatel-Lucent Mobility Access Switches and other wiring closet equipment.

The 135 series of APs features two dual-band 2.4-GHz and 5-GHz radios with 3x3 MIMO and four integrated omni-directional downtilt antennas. The 134 series features the same radios with external antenna connectors.






• Controller-managed mode: When managed by Alcatel-Lucent Mobility Controllers, 130 series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Please refer to the Alcatel-

Lucent Mobility Controller data sheets for more details.


For large installations, the Alcatel-Lucent Product Activation Service dramatically reduces deployment time by automating Alcatel-Lucent Instant provisioning, firmware upgrades and inventory management.APs are factory-shipped to your deployment site and configure themselves when powered up.



Security

• MACSec security for authorization and data encryption between the AP ports and the wired access layer (requires MACSec support on the wired edge switch)








- 802.11b: Direct-sequence spread-spectrum (DSSS) - 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM) - 802.11n: 3x3 MIMO with three spatial streams

• Supported modulation types: - 802.11b: BPSK, QPSK, CCK - 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM • Transmit power: Configurable in increments of 0.5 dBm • Maximum transmit power: - 2.4GHz: 23 dBm (limited by local regulatory requirements) - 5 GHz: 23 dBm (limited by local regulatory requirements) • Maximum ratio combining (MRC) for improved receiver performance • Cyclic Delay Diversity for improved downlink RF performance • Short guard interval for 20-MHz and 40-MHz channels • Low-density parity check (LDPC) for high-efficiency error

correction and increased throughput • Space time blocking code (STBC) for increased range and

improved reception • Transmit beam-forming (TxBF) for increased reliability in

signal delivery • Association rates (Mbps): - 802.11b: 1, 2, 5.5, 11 - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 - 802.11n: MCS0 – MCS23 (6.5 Mbps – 450 Mbps) • 802.11n high-throughput (HT) Support: HT 20/40 • 802.11n packet aggregation: A-MPDU, A-MSDU

Power • 48 volts DC 802.3af power over Ethernet (PoE) or 802.3at PoE+

- Note: when using 802.3af POE, the second Ethernet port is disabled. It is enabled when using an 802.3at POE power source (or direct DC power).

• 12 volts DC external AC supplied power (adapter sold separately) • Maximum power consumption: 12.5 watts Antenna • AP134 and IAP134: Three RP-SMA connectors for external

dual-band antennas • AP135 and IAP135: Six integrated downtilt omni-directional

antennas for 3x3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz

Interfaces • Network: Two 10/100/1000BASE-T Ethernet (RJ-45),

auto-sensing link speed and MDI/MDX • Ethernet ports support MACSec encryption and 802.3az EEE • 48 volts DC 802.3af PoE or 802.3at PoE+ interoperable with intellisource power sourcing equipment (both ports) • Other: One RJ-45 console interface Mounting • Included with AP: - Molded mounting tabs for attaching to 15/16” T-bar drop-tile ceiling

- Kensington security lock point • Optional mounting kit:

- OAW-AP130-MNT: OmniAccess AP130 Series wall/ceiling mounting kit. - OAW-AP-130-MNTC2: Alcatel-Lucent 130 series AP mount kit contains two ceiling-grid rail adapters for interlude and silhouette style rails - OAW-AP-130-MNTW2: Alcatel-Lucent 130 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle.

Mechanical • Dimensions/weight (unit): - 170 mm x 170 mm x 45 mm (6.69” x 6.69” x 1.77”) - .76 kg (1.68 lb) • Dimensions/weight (shipping): - 285 mm x 240 mm x 70 mm (11.22” x 9.45” x 2.76”) - 1.05 kg (2.31 lb) Environmental • Operating: - Temperature: 0° C to 50° C (+32° F to +122° F) - Humidity: 5 to 95% non-condensing • Storage and transportation temperature range: - Temperature: -40° C to +70° C (-40° F to +15 8° F) Regulatory • FCC/Industry of Canada • CE Marked • R&TTE Directive 1995/5/EC • Low Voltage Directive 72/23/EEC • EN 300 328 • EN 301 489 • EN 301 893 • UL/IEC/EN 60950 • EN 60601-1-1, EN60601-1-2 Certifications • CB Scheme Safety, cTUVus • UL2043 Plenum rating • Wi-Fi certified 802.11a/b/g/n

Warranty

• Limited lifetime warranty

Minimum AOS version

• 6.1.1.0 on an Alcatel-Lucent Mobility Controller



IAP135 and AP135 ANTENNA PATTERN PLOTS

2.450 GHz, H-Plane, 20 degrees down-tilt 2.450 GHz, E-plane, AP facing down

H-plane E-plane

5.500 GHz, H-Plane, 20 degrees down-tilt 5.500 GHz, E-plane, AP facing down

H-plane E-plane


chain

(dBm)

RX Sensitivity

(dBm)


chain

(dBm)

RX Sensitivity

(dBm)

2.4 GHz 5 GHz

802.11b

1Mbps 18 -97

11Mbps 18 -92

802.11a/g

6Mbps 18 -94 18 -94

54Mbps 16 -81 16 -82

802.11n HT20

MCS0/8/16 17 -94 17 -94

MCS7/15/23 12 -78 12 -78

802.11n HT40

MCS0/8/16 17 -92 17 -92

MCS7/15/23 11 -75 11 -74



OAW-IAP134

OmniAccess Instant AP134 Wireless Access Point, 802.11abgn, 3x3:3, dual radio,antenna connectors. Requires external antenna. Unrestricted Regulatory Domain. These products should be considered as `Rest of World` products and MUST NOT be used for deployments in the United States, Japan or Israel

OAW-IAP135

OmniAccess Instant AP135 Wireless Access Point, 802.11abgn, 3x3:3, dual radio, integrated antennas. Unrestricted Regulatory Domain. These products should be considered as `Rest of World` products and MUST NOT be used for deployments in the United States, Japan or Israel

OAW-AP134 OmniAccess AP134 Wireless Access Point, 802.11a/b/g/n, 3x3:3, dual radio, external antenna connectors

OAW-AP135 OmniAccess AP135 Wireless Access Point, 802.11a/b/g/n, 3x3:3, dual radio, integrated antennas

OAW-AP-AC-UN Universal AC Power Adapter Kit for OmniAccess AP and IAP 135, 134, 105, 104, 92, 92 - North America, Japan, United Kingdom, Italy, EC (Shuko), Australia, China, India, Korea.

OAW-AP130-MNT OmniAccess AP130 Series Access Point wall/ceiling mounting kit

OAW-MS-3501G 1 Port 802.3af PoE Midspan 10/100/1000 15.4 W

OAW-MS-9001G 1 Port 802.3at PoE Midspan 10/100/1000 30 W


ALCATEL-LUCENT OMNIACCESS 175 SERIES ACCESS POINTS DUAL RADIO OUTDOOR ACCESS POINTS

The multifunctional 175 series outdoor wireless access points (APs) deliver enterprise-grade Wi-Fi to high-density client environments in campuses, storage yards, warehouses, container and transportation facilities, extreme industrial production areas and other harsh environments.

These high-performance 802.11n APs deliver wireless data rates up to 300 Mbps per radio and ensure peak performance by utilizing channel bonding, block acknowledgement and MIMO radios. Advanced antenna technology also increases RF signal range and reliability.

Able to survive in harsh outdoor environments, 175 series APs withstand exposure to high and low temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial-strength surge protection.

The 175 series outdoor APs feature two dual-band 2.4-GHz and 5-GHz radios with 2x2 MIMO and four external antenna connectors.






• Controller-managed mode: When managed by Alcatel-Lucent Mobility Controllers, 175 series APs offer centralized configuration, data encryption, policy

enforcement and network services, as well as distributed and centralized traffic forwarding. Please refer to the Alcatel-Lucent Mobility Controller data sheets for more details.


For large installations, the Alcatel-Lucent Product Activation Service dramatically reduces deployment time by automating Alcatel-Lucent Instant provisioning, firmware upgrades and inventory management. APs are factory-shipped to your deployment site and configure themselves when powered up.



Security








- 802.11b: Direct-sequence spread-spectrum (DSSS) - 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM) - 802.11n: 2x2 MIMO with two spatial streams

• Supported modulation types: - 802.11b: BPSK, QPSK, CCK - 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM • Transmit power: Configurable in increments of 0.5 dBm • Maximum transmit power: - 2.4GHz: 23 dBm (limited by local regulatory requirements) - 5 GHz: 23 dBm (limited by local regulatory requirements) • Maximum ratio combining (MRC) for improved receiver performance • Cyclic Delay Diversity for improved downlink RF performance • Space time blocking code (STBC) for increased range and

improved reception • Association rates (Mbps): - 802.11b: 1, 2, 5.5, 11 - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 - 802.11n: MCS0 - MCS15 (6.5 Mbps - 300 Mbps) • 802.11n high-throughput (HT) Support: HT 20/40 • 802.11n packet aggregation: A-MPDU, A-MSDU

Power In • IAP175P and AP175P: 48-volt DC 802.3at power over Ethernet (PoE+) • IAP175AC and AP175AC: 100-240-volt AC from external AC power source • AP-175DC: 12-48 volt DC from external DC power source

• Maximum power consumption: 18 watts; excludes power consumed by any PoE device connected to and powered by the IAP175AC and AP175AC Power Out • The AC and DC powered models provide an 802.3af PoE power source (PSE) on the Ethernet interface Antenna • Four N-type female interfaces (two 2.4 GHz and two 5 GHz) for external MIMO antennas • Feeder cable may be used for external antenna deployments Interfaces • Network: One 10/100/1000BASE-T Ethernet (RJ-45),auto-sensing link

speed and MDI/MDX • Power: One AC power connector (IAP-175AC and AP-175AC) and one DC power connector (IAP-175DC and AP-175DC) • Other: One USB console interface Mounting • Wall or mast mounted using the mounting bracket supplied with the unit; solar shield included Mechanical • Dimensions/weight (unit): - 225 mm x 225 mm x 105 mm (8.9” x 8.9” x 4.1“), excluding

connectors - 3.5 kg (7.7 lb): IAP175P and AP175P - 4.25 kg (9.4 lb): IAP-175AC, AP175AC and AP175DC • Dimensions/weight (shipping): - 395 mm x 348 mm x 375 mm (15.6” x 13.7” x 14.8“) - 8.25 kg (18.2 lb): IAP175P and AP175P - 9 kg (19.8 lb): IAP175AC, AP175AC and AP175DC Environmental • Operating Temprature: - -30° C to 60° C (-22° F to 140° F): IAP175P and AP175P - -40° C to 55° C (-40° F to 131° F): IAP175A C, AP175AC and AP175DC • Operating humidity: 5% to 95% non-condensing • Operating altitude: Up to 3,000 meters (9,850 feet) • Storage and transportation temperature range: - Temperature: -40° C to +70° C (-40° F to +15 8° F) • Weather rating: IP66 • Wind survivability: Up to 165 mph • Shock and vibration: ETSI 300-19-2-4 spec T41.E class 4M3 Regulatory • FCC/Industry of Canada • CE Marked • R&TTE Directive 1995/5/EC • Low Voltage Directive 72/23/EEC • EN 300 328 • EN 301 489 • EN 301 893 • UL/IEC/EN 60950

Certifications • CB Scheme Safety, cTUVus • Wi-Fi certified 802.11a/b/g/n

Warranty

• One year parts and labor

Minimum AOS version

• 5.0.2.1 on an Alcatel-Lucent Mobility Controller



Maximum capability of the hardware provided. Maximum transmit power will be limited by local regulatory settings.


chain

(dBm)

RX Sensitivity

(dBm)


chain

(dBm)

RX Sensitivity

(dBm)

2.4 GHz 5 GHz

802.11b

1Mbps 20 -96

2Mbps 20 -96

5.5Mbps 20 -94

11Mbps 20 -93

802.11a/g

6Mbps 20 -96 22 -97

9Mbps 20 -96 22 -96

12Mbps 20 -96 22 -96

18Mbps 20 -95 22 -94

24Mbps 19 -92 22 -88

36Mbps 18 -89 20 -86

48Mbps 17 -85 19 -82

54Mbps 17 -83 18 -80

802.11n HT20

MCS0 22 -94 21 -97

MCS1 22 -93 20 -94

MCS2 22 -92 19 -91

MCS3 22 -89 18 -87

MCS4 21 -85 17 -86

MCS5 20 -81 16 -81

MCS6 19 -80 15 -79

MCS7 18 -78 15 -77

MCS8 22 -94 21 -97

MCS9 22 -93 20 -94

MCS10 22 -92 19 -91

MCS11 22 -89 18 -87

MCS12 21 -85 17 -86

MCS13 20 -81 16 -81

MCS14 19 -80 15 -79

MCS15 18 -78 15 -77

802.11n HT40

MCS0 21 -92 19 -92

MCS1 21 -91 19 -90

MCS2 21 -89 18 -88

MCS3 20 -86 17 -85

MCS4 19 -83 16 -83

MCS5 18 -79 15 -79

MCS6 18 -77 14 -77

MCS7 17 -75 14 -73

MCS8 21 -92 19 -92

MCS9 21 -91 19 -90

MCS10 21 -89 18 -88

MCS11 20 -86 17 -85

MCS12 19 -83 16 -83

MCS13 18 -79 15 -79

MCS14 18 -77 14 -77

MCS15 17 -75 14 -73



OAW-AP175POE

Outdoor access point designed for high-density applications. Supports 802.11a/n and 802.11b/g/n duel-radio (320mW). 2x2 MIMO with two spatial streams, providing up to 300 Mbps data rate per radio. Supports one 10/100 Base-T (RJ-45) Ethernet interface supporting 48-volt DC 802.3at power over Ethernet (PoE+).4 N-type female interfaces (2 x 2.4 GHz, 2 x 5 GHz) for external antenna support. Wall or poll mounted using the mounting bracket supplied with the unit; solar shield included.

OAW-AP175AC

Outdoor access point designed for high-density applications. Supports 802.11a/n and 802.11b/g/n duel-radio (320mW). 2x2 MIMO with two spatial streams, providing up to 300 Mbps data rate per radio. Supports one 10/100 Base-T (RJ-45) Ethernet interface. Requires 100-240 volt AC from external AC power source. 4 N-type female interfaces (2 x 2.4 GHz, 2 x 5 GHz) for external antenna support. Wall or poll mounted using the mounting bracket supplied with the unit; solar shield included

OAW-AP175DC

Outdoor access point designed for high-density applications. Supports 802.11a/n and 802.11b/g/n duel-radio (320mW). 2x2 MIMO with two spatial streams, providing up to 300 Mbps data rate per radio. Supports one 10/100 Base-T (RJ-45) Ethernet interface. Requires 12-48 volt DC from external DC power source. 4 N-type female interfaces (2 x 2.4 GHz, 2 x 5 GHz) for external antenna support. Wall or poll mounted using the mounting bracket supplied with the unit; solar shield included.

OAW-IAP175POE

Outdoor Instant access point designed for high-density applications. Supports 802.11a/n and 802.11b/g/n duel-radio (320mW). 2x2 MIMO with two spatial streams, providing up to 300 Mbps data rate per radio. Supports one 10/100 Base-T (RJ-45) Ethernet interface supporting 48-volt DC 802.3at power over Ethernet (PoE+).4 N-type female interfaces (2 x 2.4 GHz, 2 x 5 GHz) for external antenna support. Wall or poll mounted using the mounting bracket supplied with the unit; solar shield included.

OAW-IAP175AC

Outdoor Instant access point designed for high-density applications. Supports 802.11a/n and 802.11b/g/n duel-radio (320mW). 2x2 MIMO with two spatial streams, providing up to 300 Mbps data rate per radio. Supports one 10/100 Base-T (RJ-45) Ethernet interface. Requires 100-240 volt AC from external AC power source. 4 N-type female interfaces (2 x 2.4 GHz, 2 x 5 GHz) for external antenna support. Wall or poll mounted using the mounting bracket supplied with the unit; solar shield included

OAW-ACONGEUSB00 1.5m USB-DB9 console cable

OAW-AINS2KKIT00 OmniAccess AP175 installation kit

OAW-AP-LAR-1 Outdoor Antenna Lightning Arrestor. Lightning Surge Arrestor for the OAW-AP80/AP85/AP175 Access Points: Single, In-line lightening arrester with N-type Male to N-type Female interface. Supports RF frequency pass through of 2 – 6 GHz.

OAW-AP-CBL-1 Outdoor Antenna Cable Extension. 10 ft long low-loss LMR 400 antenna extension cable for use with the OAW-AP80 Outdoor Access Points, interfaces OAW-AP80/AP85/AP175 N-Type Female interface to N-Type Male on antenna.


ALCATEL-LUCENT OMNIACCESS 200 SERIES ACCESS POINTSBRINGING 802.11AC TO THE MASSES

Multifunctional and affordable OmniAccesss 200 series 802.11ac wireless access points (APs) maximize mobile device performance in medium-density enterprise Wi-Fi environments.

These compact and cost-effective dual-radio APs deliver wireless data rates of up to 867 Mb/s to 5 GHz devices with802.11ac technology, leveraging two spatial multiple-input and multiple-output (MIMO) streams while simultaneously supporting 2.4 GHz 802.11n clients with data rates of up to 300 Mb/s.

The AP205 and IAP205 models feature four integrated omnidirectional downtilt antennas, while the AP204 and IAP204 support external detachable dual-band antennas using two RP-SMA antenna connectors.

The 200 series APs enhances unified access portfolio for the mobile enterprise that is able to deliver applications and services along with consistent, high-quality user experience across wired and wireless environments.

The unified access network starts with a wire-rate 10GbE/40GbE network core. The core includes the Alcatel-Lucent OmniSwitch™ 6900 Stackable LAN Switch, OmniSwitch 9000E Chassis LAN Switch, and the OmniSwitch 10K Modular LAN Chassis. The unified access network pro-vides a common set of network services, policy framework, authentication scheme and a single authentication database that applies to users accessing the network with either wired or wireless devices. Wire line access is provided by stackable LAN switches like the Alcatel-Lucent OmniSwitch 6855 Hardened LAN Switch, OmniSwitch 6850E and OmniSwitch 6450 Stackable LAN Switches and OmniSwitch 6250 Stackable Fast Ethernet Switch; wireless access is provided by compre-hensive portfolio of 802.11ac, 802.11n OmniAccess™ Wi-Fi access points and Controllers; while BYOD, guest access, onboarding and policy management services are provided by ClearPass Policy Management System.

The 200 series APs offer a choice of operating modes to meet individual man-agement and deployment requirements.

• Controller-managed AP or Remote AP (R AP) running AOS-W. When managed by OmniAccess Mobility Controllers, 200 series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding.

• Alcatel-Lucent Instant AP running InstantOS. In Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the

WLAN. Simply power-up an Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes.

If WLAN requirements change, a built-in migration path allows 200 series Instant APs to become part of a WLAN managed by a Mobility Controller.

FEATURES• ClientMatch dynamically optimizes

Wi-Fi client perfor mance as users roam and RF conditions change.

• Remote spectrum analysis to identify sources of RF interference

• Advanced Cellular Coexistence (ACC)

• The 200 series APs support priority handling and policy enforcement for unified communication apps, including Microsoft® Lync™ with encrypted videoconferencing, voice, chat and desktop sharing.

BENEFITS • Improved WiFi quality and support

high densities of mobile devices.

• Delivers best-in-class RF management

• ACC feature enables Alcatel-Lucent WLANs to perform at peak efficiency by minimizing interference with 3G/4G networks.

• Quality of service for unified communication apps

2

Alcatel-Lucent OmniAccess 200 Series Access Points

ALCATEL-LUCENT ENTERPRISE DATA SHEET

AP200 SERIES SPECIFICATIONS• AP205 and IAP205

¬ 2.4 GHz (300 Mb/s max rate) and 5 GHz (867 Mb/s max rate) radios, each with 2 x 2 MIMO and four integrated omni-directional downtilt antennas

• AP204 and IAP204

¬ 2.4 GHz (300 Mb/s max rate) and 5 GHz (867 Mb/s max rate) radios, each with 2 x 2 MIMO and two combined, diplexed external RP-SMA antenna connectors

ADVANCED FEATURES• RF management

¬ Adaptive Radio Management™ (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs

¬ 200 Series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, virtual private network (VPN) tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available


¬ Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4 GHz and 5 GHz radio bands to identify sources of RF interference

• Security

¬ Integrated Trusted Platform Module (TPM) to securely store credentials and keys

¬ SecureJack-capable to securely tunnel wired Ethernet traffic

OPERATING MODES• Instant AP

• Mobility Controller-managed AP

• RAP for branch deployments

• Air monitor (AM) for wireless intrusion detection system (WIDS), rogue detection and containment

• Spectrum analyzer, dedicated or hybrid


WIRELESS RADIO SPECIFICATIONS

• AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n 2 x 2:2


• 2 x 2 MIMO with two spatial streams and up to 867 Mb/s wireless data rate


¬ 2.4000 GHz to 2.4835 GHz

¬ 5.150 GHz to 5.250 GHz

¬ 5.250 GHz to 5.350 GHz

¬ 5.470 GHz to 5.725 GHz

¬ 5.725 GHz to 5.850 GHz


• Dynamic frequency selection (DFS) optimizes available RF spectrum use


¬ 802.11b: Direct-sequence spread spectrum (DSSS)

¬ 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)


¬ 802.11b: Binary phase-shift keying (BPSK), quadrature phase shift keying (QPSK), Complementary Code Keying (CCK)

¬ 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM








• Short guard interval for 20 MHz, 40 MHz and 80 MHz channels



• Transmit beamforming (TxBF) for increased reliability in signal delivery


¬ 802.11b: 1, 2, 5.5, 11

¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

¬ 802.11n: 6.5 to 300 (MCS0 to MCS15)

¬ 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2)


• 802.11ac very high throughput (VHT) support: VHT 20/40/80

• 802.11n/ac packet aggregation: A-MPDu, A-MSDu

Antennas• AP204/IAP204: Two RP-SMA connectors

for external dual-band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.5 dB in 2.4 GHz and 3.0 dB in 5 GHz

• AP205/IAP205: Four integrated down-tilt omni- directional antennas for 2 x 2 MIMO with maximum antenna gain of 4.0 dBi in 2.4 GHz and 6.0 dBi in 5 GHz. built-in antennas are optimized for horizontal ceiling-mounted orientation of the AP

OTHER INTERFACES• 10/100/1000BASE-T Ethernet network

interface (RJ-45)


¬ 802.3az Energy-Efficient Ethernet (EEE)

¬ Power over Ethernet (PoE)-PD: 48-V DC (nominal) 802.3af PoE

• DC power interface, accepts 1.7 mm/ 4.0 mm center-positive circular plug with 9.5 mm length





• Reset button: factory reset (during device power up)

• Serial console interface (RJ-45)


POWER• Maximum (worst-case) power

consumption: 12.5 W (PoE) or 11.7 W (DC)

• Maximum (worst-case) power consumption in idle mode: 8.4 W (PoE) or 7.7 W (DC)

• Direct DC source: 12-V DC nominal, +/- 5%

• PoE: 48-V DC (nominal) 802.3af-compliant source


• When both power sources are available, DC power takes priority

3



MOUNTING• Included with AP:

¬ Mounting brackets (2) for attaching to 9/16 inch or 15/16 inch T-bar drop-tile ceiling

• Spare mounting kit:

¬ AP220-MNT-C1: Access Point Mount Kit (ceiling grid).

Contains two ceiling grid rail adapters (for basic flat rails)


¬ OAW-AP220-MNTC2: OmniAccess AP220 Series Access Point Mount Kit (ceiling grid). Contains two ceiling grid rail adapters (for Interlude and Silhouette style rails)

¬ OAW-AP220-MNTW1: OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface). Contains on flat surface wall/ceiling mount bracket

¬ OAW-AP220-MNTW2: OmniAccess AP220 Series Access Point Mount Kit (box style, secure, flat surface). Contains on flat surface wall/ceiling secure mount cradle

MECHANICAL• Dimensions/weight (unit, excluding mount

accessories):

¬ 150 mm x 150 mm x 41.5 mm (W x D x H)

¬ 380 g

• Dimensions/weight (shipping):¬ 190 mm x 187 mm x 57 mm (W x D x H)

¬ 550 g

ENVIRONMENTAL• Operating:

¬ Temperature: 0°C to +40°C (+32°F to +104°F)




REGULATORY• FCC/Industry Canada

• CE Marked



• EN 300 328

• EN 301 489

• EN 301 893

• UL/IEC/EN 60950

• EN 60601-1-1 and EN 60601-1-2

RELIABILITYMean time between failures (MTBF): 711,187 hours (81.2 years) at +25°C operating temperature

REGULATORY MODEL NUMBER• OAW-AP204 and OAW-IAP204: APIN0204


CERTIFICATIONS• CB Scheme Safety, cTUVus


• Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac

WARRANTY• Limited lifetime warranty

MINIMUM SOFTWARE VERSIONS

• AOS-W 6.4.1.0


RF performance table

MAXIMUM TRANSMIT POWER (DBM) PER TRANSMIT CHAIN

RECEIVER SENSITIVITY (DBM) PER RECEIVE CHAIN

2.4 GHz

802.11b

1 Mb/s 18.0 -95.0

11 Mb/s 18.0 -88.0

802.11g

6 Mb/s 18.0 -92.0

54 Mb/s 16.0 -74.0

802.11n HT20

MCS0/8 18.0 -91.0

MCS7/15 16.0 -71.0

802.11n HT40

MCS0/8 18.0 -88.0

MCS7/15 16.0 -68.0

4





5 GHz

802.11a

6 Mb/s 18.0 -93.0

54 Mb/s 16.0 -75.0

802.11n HT20

MCS0/8 18.0 -91.0

MCS7/15 15.0 -71.0

802.11n HT40

MCS0/8 18.0 -89.0

MCS7/15 15.0 -68.0

802.11ac VHT20

MCS0 18.0 -91.0

MCS9 12.0 -64.0

802.11ac VHT40

MCS0 18.0 -88.0

MCS9 12.0 -62.0

802.11ac VHT80

MCS0 18.0 -85.0

MCS9 12.0 -59.0 Maximum capability of the hardware provided. Maximum transmit power is limited by local regulatory settings.

ANTENNA PATTERN PLOTS

2.450 12.450 2

Horizontal or azimuth plane (top view), 0 degeree downtilt

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

2.450 GHz

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

5.470 GHz

2.450 12.450 2

Horizontal or azimuth plane (top view), 30 degree downtilt

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

2.450 GHz

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

5.470 GHz

2.450 12.450 2

Elevation plane (side view, 0 degree angle)

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

2.450 GHz

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

5.470 GHz

5



2.450 12.450 2

Horizontal or azimuth plane (top view), 0 degeree downtilt

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

2.450 GHz

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

5.470 GHz

2.450 12.450 2

Horizontal or azimuth plane (top view), 30 degree downtilt

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

2.450 GHz

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

5.470 GHz

2.450 12.450 2


150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

2.450 GHz

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

5.470 GHz

2.450 12.450 2


150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

2.450 GHz

150

180 165

345

195

30

150

330

210

45

135

315

225

60

120

300

240

75

105

285

255

270 90-40-35-30-25-20-15-10

-505

5.470 GHz




200 series access points

OAW-AP204 OmniAccess AP204 Dual radio IEEE 802.11ac (2 x 2:2) wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, RP-SMA external antenna connectivity, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (supports 802.3af Power over Ethernet), 1 x 12-V DC power interface

OAW-IAP204-RW OmniAccess Instant AP204 Dual radio IEEE 802.11ac (2x2:2) wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, RP-SMA external antenna connectivity, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af Power over Ethernet), 1 x 12V DC power interface. Rest of the world - Not to be used in US.

OAW-IAP204-US OmniAccess Instant AP204 Dual radio IEEE 802.11ac (2x2:2) wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, RP-SMA external antenna connectivity, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af Power over Ethernet), 1 x 12V DC power interface. Restricted regulatory domain: United States.

OAW-IAP204-IS OmniAccess Instant AP204 Dual radio IEEE 802.11ac (2x2:2) wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, RP-SMA external antenna connectivity, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af Power over Ethernet), 1 x 12V DC power interface. Restricted regulatory domain: Israel.

OAW-IAP204-JP OmniAccess Instant AP204 Dual radio IEEE 802.11ac (2x2:2) wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, RP-SMA external antenna connectivity, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af Power over Ethernet), 1 x 12V DC power interface. Restricted regulatory domain: Japan.

OAW-AP205 OmniAccess AP205 Dual radio IEEE 802.11ac (2x2:2) wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (supports 802.3af Power over Ethernet), 1 x 12-V DC power

OAW-IAP205-RW OmniAccess Instant AP205 Dual radio IEEE 802.11ac (2x2:2) wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af Power over Ethernet), 1 x 12V DC power. Rest of the world - Not to be used in US.

OAW-IAP205-US OmniAccess Instant AP205 Dual radio IEEE 802.11ac (2x2:2) wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af Power over Ethernet), 1 x 12V DC power. Restricted regulatory domain: United States.

OAW-IAP205-IS OmniAccess Instant AP205 Dual radio IEEE 802.11ac (2x2:2) wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af Power over Ethernet), 1 x 12V DC power. Restricted regulatory domain : Israel.

OAW-IAP205-JP OmniAccess Instant AP205 Dual radio IEEE 802.11ac (2x2:2) wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3af Power over Ethernet), 1 x 12V DC power. Restricted regulatory domain: Japan.

Mounting spares

AP-220-MNT-C1 OmniAccess Access Point Mount Kit (ceiling grid). Contains two ceiling grid rail adapters (for flat rails). Color: black. Spare

Mounting accessories

OAW-AP220-MNTC2 OmniAccess AP220 Series Access Point Mount Kit (ceiling grid). Contains two ceiling grid rail adapters (for Interlude and Silhouette style rails). Color: black

OAW-AP220-MNTW1 OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface). Contains one flat surface wall/ceiling mount bracket. Color: black

OAW-AP220-MNTW2 OmniAccess AP220 Series Access Point Mount Kit (box style, secure, flat surface). Contains one flat surface wall/ceiling secure mount cradle

Generic Indoor AP accessories

OAW-AP-AC-UN Universal AC Power Adapter Kit for OmniAccess AP and IAP 105, 92, 92 – North America, Japan, United Kingdom, Italy, EC (Shuko), Australia, China, India, Korea

OAW-AP-AC-12V18 OmniAccess12VDC/18W AC Power Adapter for compatible indoor AP models. Does not include country-specific power cord.

OAW-MS-3501G 1 Port 802.3af PoE Midspan 10/100/1000 15.4W. No power cord included


ALCATEL-LUCENT OMNIACCESS 210 SERIES ACCESS POINTSAFFORDABLE, HIGH-PERFORMANCE 802.11AC

Multifunctional and affordable Alcatel-Lucent OmniAccess 210 series wireless access points (APs) maximize mobile device performance in medium-density, high- performance Wi-Fi environments.

These compact and cost-effective dual-radio APs deliver wireless data rates of up to 1.3 Gbps to 5-GHz devices with802.11ac technology. They also support 3x3 MIMO with three spatial streams as well as 2.4-GHz 802.11n clients at data rates up to 450 Mbps.

The AP215 and IAP215 models have six integrated omni- directional downtilt antennas, while the AP214 and IAP214 support external, detachable dual-band antennas using three RP-SMA connectors.

FEATURES• RF management

¬ Adaptive Radio Management™ (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.

¬ 210 series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend corporate resources to remote locations, and wireless mesh connections where Ethernet drops are not available.


¬ Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference

• Security

¬ Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys.

¬ SecureJack-capable for secure tunneling of wired Ethernet traffic.

BENEFITS• Wi-Fi client optimization

¬ The 210 series features patented ClientMatch™ technology to eliminate sticky client behavior while users roam. ClientMatch continuously gathers session performance metrics from mobile devices.

¬ If a mobile device moves away from an AP or if RF interference impedes performance, ClientMatch automatically steers the device to a better AP.


¬ ACC lets WLANs to perform at peak efficiency by minimizing interference from 3G/4G LTE networks, distributed antenna systems and commercial small cell/femtocell equipment.


¬ The 210 series supports priority handling and policy enforcement for unified communication apps, including Microsoft Lync with encrypted videoconferencing, voice, chat and desktop sharing.

2


Choose your operating modeThe 210 series supports your choice of operating modes to meet unique manage-ment and deployment requirements.

• Controller-managed AP or Remote AP (RAP) running AOS-W. When managed by OmniAccess Mobility Controllers, 210 series APs offer centralized configuration, data encryption, policy enforcement and network services as well as distributed and centralized traffic forwarding.

• Alcatel-Lucent Instant™ AP running InstantOS™. In Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes.

AP-210 SERIES SPECIFICATIONS


¬ 2.4-GHz (450 Mbps max rate) and 5-GHz (1.3 Gbps max rate) radios, each with 3x3 MIMO and six integrated omni-directional downtilt antennas.


¬ 2.4-GHz (450 Mbps max rate) and 5-GHz (1.3 Gbps max rate) radios, each with 3x3 MIMO and three combined, diplexed (dual-band) external RP-SMA antenna connectors.

Oper ating modes• Instant AP

• Mobility Controller-managed AP

• Remote AP (RAP) for branch deployments

• Air monitor (AM) for wireless IDS, rogue detection and containment

• Spectrum analyzer, dedicated or hybrid

• Secure enterprise mesh (targeted for introduction in AOS-W 6.4.3)

WIRELESS RADIO SPECIFICATIONS

• AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n 3x3:3


• 3x3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate


¬ 2.4000 GHz to 2.4835 GHz

¬ 5.150 GHz to 5.250 GHz

¬ 5.250 GHz to 5.350 GHz

¬ 5.470 GHz to 5.725 GHz

¬ 5.725 GHz to 5.850 GHz








¬ 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM




¬ 5-GHz band: +23 dBm (18 dBm per chain)

¬ Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain




• Short guard interval for 20-MHz, 40-MHz and 80-MHz channels



• Transmit beamforming (TxBF) for increased signal reliability and range

• Supported data rates (Mbps):

¬ 802.11b: 1, 2, 5.5, 11

¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

¬ 802.11n: 6.5 to 450 (MCS0 to MCS23)

¬ 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3)



• 802.11n/ac packet aggregation: A-MPDU, A-MSDU

Antennas• AP-214/IAP-214: Three RP-SMA

connectors for external dual-band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.0 dB in 2.4 GHz and 2.0 dB in 5 GHz.

• AP215/IAP215: Six integrated downtilt omni-directional antennas for 3x3 MIMO with maximum antenna gain of 5.0 dBi in 2.4 GHz and 5.0 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. Downtilt angle for maximum gain is roughly 30 degrees.

Other interfaces• One 10/100/1000BASE-T Ethernet

network interface (RJ-45)



¬ PoE-PD: 48 Vdc (nominal) 802.3af or 802.3at PoE

• DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length






• Reset button: factory reset (during device power-up)



Power• Maximum (worst-case) power

consumption: 14.9 watts (PoE) or 13.6 watts (DC)

¬ Excludes power consumed by external USB device (and internal overhead); this could add up to 6 watts (PoE) or 5.5 watts (DC) for 5W/1A USB device

• Maximum (worst-case) power consumption in idle mode: 8.2 watts (PoE) or 7.4 watts (DC)

• Direct DC source: 12 Vdc nominal, ±5%

• Power over Ethernet: 48 Vdc (nominal) 802.3af/802.3at compliant source

¬ USB port is disabled when using an 802.3af PoE power source; for unrestricted operation with PoE power, use an 802.3at compliant source



3



¬ Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling

• Spare mounting kit:

¬ AP-220-MNT-C1: OmniAccess AP mount kit contains two ceiling-grid rail adapters for flat rails


¬ AP-220-MNT-C2: OmniAccess AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails

¬ AP-220-MNT-W1: OmniAccess AP mount kit contains one basic flat-surface wall/ceiling mount bracket

¬ AP-220-MNT-W2: OmniAccess AP mount kit contains one secure flat-surface wall/ceiling mount cradle

Mechanical• Dimensions/weight (unit, excluding mount

accessories):

¬ 180 mm x 180 mm x 45 mm (W x D x H)

¬ 610 g


¬ 220 mm x 225 mm x 55 mm (W x D x H)

¬ 860 g


¬ Temperature: 0° C to +50° C (+32° F to +122° F)



¬ Temperature: -40° C to +70° C (-40° F to +158° F)

Regulatory• FCC/Industry of Canada

• CE Marked


• Low Voltage Directive 2006/95/EC

• EN 300 328

• EN 301 489

• EN 301 893

• UL/IEC/EN 60950

• EN 60601-1-1, EN60601-1-2


ReliabilityMTBF: 538,975 hours (61.5 years) at +25° C operating temperature

Regulatory model numbers• AP214 and IAP214: APIN0214

• AP215 and IAP215: APIN0215





Minimum software Versions• AOS-W 6.4.2.0


RF performance table



802.11b 2.4 GHz

1 Mbps 18.0 -97.0

11 Mbps 18.0 -89.0

802.11g 2.4 GHz

6 Mbps 18.0 -93.0

54 Mbps 18.0 -75.0

802.11n HT20 2.4 GHz

MCS0/8/16 18.0 -92.0

MCS7/15/23 16.0 -72.0

802.11n HT40 2.4 GHz

MCS0/8/16 18.0 -90.0

MCS7/15/23 16.0 -70.0

802.11a 5 GHz

6 Mbps 18.0 -93.0

54 Mbps 16.5 -75.0

802.11n HT20 5 GHz

MCS0/8/16 18.0 -92.0

MCS7/15/23 16.0 -72.0

802.11n HT40 5 GHz

MCS0/8/16 18.0 -89.0

MCS7/15/23 16.0 -69.0

4




802.11ac VHT 20 5 GHz

MCS0 18.0 -92.0

MCS9 14.0 -65.0

802.11ac VHT40 5 GHz

MCS0 18.0 -89.0

MCS9 14.0 -62.0


MCS0 18.0 -86.0

MCS9 14.0 -59.0

Maximum capability of the hardware provided (excluding antenna gain). Maximum transmit power is limited by local regulatory settings.

Antenna pattern plots

Horizontal or azimuth plane (top view, 0 degrees downtilt)

0345

330

315

300

285

270

255

240

225

210195

1530

2.450 1

2.450 2

2.450 3

2.450 1

2.450 2

2.450 3

2.450 GHz 5.550 GHz

-30-25

-20

-15-10

-5

0

5

-35-40

45

60

90

105

120

135

150165

180

75

0345

330

315

300

285

270

255

240

225

210195

1530

-30-25-20

-15-10

-5

0

5

-35

-40

45

60

90

105

120

135

150165

180

75

Horizontal or azimuth plane (top view, 30 degrees downtilt)0

345

330

315

300

285

270

255

240

225

210195

1530

2.450 1

2.450 2

2.450 3

2.450 1

2.450 2

2.450 3

2.450 GHz 5.550 GHz

-30-25

-20

-15-10

-5

0

5

-35-40

45

60

90

105

120

135

150165

180

75

0345

330

315

300

285

270

255

240

225

210195

1530

-30-25-20

-15-10

-5

0

5

-35

-40

45

60

90

105

120

135

150165

180

75

5


Elevation plane (side view, 0 degrees angle)

0345

330

315

300

285

270

255

240

225

210195

1530

2.450 1

2.450 2

2.450 3

2.450 1

2.450 2

2.450 3

2.450 GHz 5.550 GHz

-30-25

-20

-15-10

-5

0

5

-35-40

45

60

90

105

120

135

150165

180

75

0345

330

315

300

285

270

255

240

225

210195

1530

-30-25-20

-15-10

-5

0

5

-35

-40

45

60

90

105

120

135

150165

180

75

Elevation plane (side view, 90 degrees angle)

0345

330

315

300

285

270

255

240

225

210195

1530

2.450 1

2.450 2

2.450 3

2.450 1

2.450 2

2.450 3

2.450 GHz 5.550 GHz

-30-25

-20

-15-10

-5

0

5

-35-40

45

60

90

105

120

135

150165

180

75

0345

330

315

300

285

270

255

240

225

210195

1530

-30-25-20

-15-10

-5

0

5

-35

-40

45

60

90

105

120

135

150165

180

75



AP210 series access points

OAW-AP214 OmniAccess AP214 Wireless Access Point, 802.11n/ac, 3x3:3, dual radio, antenna connectors

OAW-IAP214-RW OmniAccess AP214 Wireless Instant Access Point, 802.11n/ac, 3x3:3, dual radio, antenna connectors – Restricted regulatory domain: Rest of World

OAW-IAP214-US OmniAccess AP214 Wireless Instant Access Point, 802.11n/ac, 3x3:3, dual radio, antenna connectors – Restricted regulatory domain:United States

OAW-IAP214-IS OmniAccess AP214 Wireless Instant Access Point, 802.11n/ac, 3x3:3, dual radio, antenna connectors – Restricted regulatory domain: Israel

OAW-IAP214-JP OmniAccess AP214 Wireless Instant Access Point, 802.11n/ac, 3x3:3, dual radio, antenna connectors – Restricted regulatory domain: Japan



OAW-AP215 OmniAccess AP215 Wireless Access Point, 802.11n/ac, 3x3:3, dual radio, integrated antennas

OAW-IAP215-RW OmniAccess AP215 Wireless Instant Access Point, 802.11n/ac, 3x3:3, dual radio, integrated antennas – Restricted regulatory domain: Rest of World

OAW-IAP215-US OmniAccess AP215 Wireless Instant Access Point, 802.11n/ac, 3x3:3, dual radio, integrated antennas – Restricted regulatory domain:United States

OAW-IAP215-IS OmniAccess AP215 Wireless Instant Access Point, 802.11n/ac, 3x3:3, dual radio, integrated antennas – Restricted regulatory domain: Israel

OAW-IAP215-JP OmniAccess AP215 Wireless Instant Access Point, 802.11n/ac, 3x3:3, dual radio, integrated antennas – Restricted regulatory domain:Japan

Mounting spares

AP-220-MNT-C1 OmniAccess access point mount kit (ceiling grid). Contains two ceiling grid rail adapters (for flat rails). Color: Black. Spare.

Mounting accessories

OAW-AP220-MNTC2 OmniAccess AP220 Series Access Point Mount Kit (ceiling grid). Contains 2x ceiling grid rail adapters (for Interlude and Silhouette style rails). Color Black

OAW-AP220-MNTW1 OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface). Contains 1x flat surface wall/ceiling mount bracket. Color Black

OAW-AP130-MNT OmniAcess AP130 Series Access Point Wall / Ceiling Mounting Kit. Color: Off-white

AP-220-MNT-W2 OmniAccess access point mount kit (secure, flat surface). Contains one flat surface wall/ceiling mount cradle. Color: Black

AP-220-MNT-W2W OmniAccess access point mount kit (secure, flat surface). Contains one flat-surface wall/ceiling mount cradle. Color: White

Generic indoor AP accessories

OAW-AP-AC-UN Universal AC Power Adapter Kit for OmniAccess AP and IAP 105, 92, 92 - North America, Japan, United Kingdom, Italy, EC (Shuko), Australia, China, India, Korea.

OAW-AP-AC-12V18 OmniAccess12VDC/18W AC Power Adapter for compatible indoor AP models. Does not include country specific power cord (order separately).

OAW-MS-3501G 1 Port 802.3af PoE Midspan 10/100/1000 15.4W. No power cord included.

PD-9001GR-AC OAW WLAN 1 Port 802.3at PoE Midspan 10/100/1000 30W. US power cord included.


ALCATEL-LUCENT OMNIACCESS 220 SERIES ACCESS POINTSSETTING A HIGHER STANDARD FOR 802.11AC

Multifunctional Alcatel-Lucent OmniAccess® 220 Series Access Points (APs) deliver gigabit Wi-Fi® performance to 802.11ac mobile devices. Integrated ClientMatch™ technology ensures consistently high performance across the WLAN infrastructure.

With a maximum data rate of 1.3 Gb/s in the 5-GHz band and 600 Mb/s in the 2.4-GHz band, the OmniAccess 220 Series APs are three-times faster than 802.11n APs and provide performance similar to a wired connection.

ClientMatch technology eliminates sticky clients by continuously gathering session performance metrics from mobile devices. This information is then used to steer each mobile device to the best AP and radio on the WLAN.

Proactive and deterministic, ClientMatch dynamically optimizes Wi-Fi client perfor-mance as users roam and RF conditions change. If a mobile device moves out of range of an AP or if RF interference impedes performance, ClientMatch automatically steers the mobile device to a better AP.

With ClientMatch, OmniAccess 220 Series APs load web pages faster, deliver video streams with improved quality and support high densities of mobile devices. An 802.11ac network without ClientMatch performs no different than an 802.11n WLAN.

In addition, the OmniAccess 220 Series APs support priority handling and policy enforcement for individual Microsoft® Lync® media on the same device, including encrypted videoconferencing, voice, chat and desktop sharing.

FEATURES• EtherChannel link aggregation on two

Gigabit Ethernet ports, providing 1.9-Gb/s aggregate throughput*

• Adapts to available 802.3af power-over-Ethernet (PoE) instead of requiring customers to upgrade to 802.3at PoE+

• Support for up to 600 Mb/s for TurboQAM-enabled mobile devices operating in the 2.4-GHz band — an industry first

• Integrated Adaptive Radio Management™ technology

• Remote spectrum analysis to identify sources of RF interference

• Wireless mesh connections, which are convenient where Ethernet drops are not available

¬ Integrated Trusted Platform Module (TPM)

¬ SecureJack-capable

BENEFITS• Provides capability for phased wired

infrastructure upgrades

• Delivers best-in-class RF management

• Provides enhanced security:

¬ Secure connection of remote users to corporate network resources

¬ Secure storage of credentials and keys

¬ Secure tunneling of wired Ethernet traffic

* Available Q3 2013

2


OPERATING MODESThe 220 Series APs offer a choice of operating modes to meet your unique management and deployment requirements.

Controller-managed AP or Remote AP (RAP) running AOS-WWhen managed by Alcatel-Lucent Mobility Controllers, 220 series APs offer central-ized configuration, data encryption, policy enforcement and network services as well as distributed and centralized traffic forwarding. Please refer to the Alcatel-Lucent Mobility Controller data sheets for more details.

Alcatel-Lucent OmniAccess IAP running InstantOS™In Instant mode, a single Instant AP (IAP) automatically distributes the network configuration to other IAPs in the WLAN. Simply power-up one IAP, configure it over the air, and plug in the other APs – the entire process takes about five minutes. Air monitor

Hybrid WLAN AP and air monitor

Secure enterprise mesh

If WLAN and network requirements change, a built-in migration path allows 220 Series IAPs to become part of a WLAN that is centrally managed by a Mobility Controller.

TECHNICAL SPECIFICATIONS220-series AP specifications

• OmniAccess WLAN (OAW)-AP225 and OAW-IAP225

¬ 2.4-GHz (600 Mb/s max) and 5-GHz (1.3 Gb/s max) radios, each with 3x3 MIMO and three integrated omni-directional downtilt antennas

• OAW-AP224 and OAW-IAP224

¬ 2.4-GHz (600 Mb/s max) and 5-GHz (1.3 Gb/s max) radios, each with 3x3 MIMO and three combined, diplexed external antenna connectors

Wireless radio specifications• AP type: Indoor, dual-radio, 5-GHz

802.11ac and 2.4-GHz 802.11n

¬ In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate.

• Software-configurable dual radio supports 5 GHz and 2.4 GHz

• 3x3 MIMO with three spatial streams and up to 1.3 Gb/s wireless data rate


¬ 2.4000 GHz to 2.4835 GHz

¬ 5.150 GHz to 5.250 GHz

¬ 5.250 GHz to 5.350 GHz

¬ 5.470 GHz to 5.725 GHz

¬ 5.725 GHz to 5.850 GHz

• Available channels: Dependent upon configured regulatory domain





¬ 802.11n/ac: 3x3 MIMO with up to three spatial streams




¬ 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM



¬ 2.4-GHz band: +23 dBm

¬ 5-GHz bands: +23 dBm

• Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems


• Cyclic delay diversity (CDD) for improved downlink RF performance




• Transmit beam-forming (TxBF) for increased reliability in signal delivery


¬ 802.11b: 1, 2, 5.5, 11

¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

¬ 802.11n: 6.5 to 450 (MCS0 to MCS15)





Power• Maximum power consumption: 15 watts,

plus up to 2.5 watts for attached USB device


• Direct DC source: 12 Vdc nominal, +/- 5%

• Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source

¬ Efficient mode PoE – power save with 802.3af PoE and limited functionality

– USB port disabled

– Second Ethernet port disabled

– 2.4-GHz 802.11n radio in 1x3:1 spatial-stream mode

– 5-GHz 802.11ac radio operates without restrictions*

¬ Unrestricted functionality with 802.3at PoE+

Antennas• AP224: Three RP-SMA connectors for

external dual-band antennas

• AP225: Six integrated down-tilt omni-directional antennas for 3x3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz; built-in antennas are optimized for horizontal ceiling mounted orientation of AP225

Other interfaces• Two 10/100/1000BASE-T Ethernet

network interfaces (RJ-45)


¬ MACSec encryption and 802.3az EEE

¬ PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+

• DC power interface; accepts 1.7/4.0-mm center-positive circular plug with 9.5 mm (0.37 in.)cord

• USB 2.0 port (Type A connector)

• Serial console interface (RJ-45, TTL levels)

• Visual indicators (LEDs)


¬ Ethernet link status: 2x; ENET0, ENET1

¬ Radio status: 2x; RAD0, RAD1


• Reset button

Mounting• Included with AP

¬ Mounting brackets (2) for attaching to 9/16-in. or 15/16

¬ in. T-bar drop-tile ceiling

• Optional mounting kits

¬ AP220-MNT-C2: OmniAccess AP220 Series Access Point Mount Kit (ceiling grid); contains 2x ceiling grid rail adapters (for Interlude and Silhouette style rails)

* With AOS-W 6.3.0, the 5-GHz 802.11ac radio operates in 2x3:2 spatial stream mode when the AP is powered by 802.3af PoE. This restriction has been removed in 6.3.1.

3


¬ AP220-MNT-W1: OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface); contains 1x flat surface wall/ceiling mount bracket

¬ AP220-MNT-W2: OmniAccess AP220 Series Access Point Mount Kit (box style, secure, flat surface); contains 1x flat surface wall/ceiling secure mount cradle

DimensionsUnit (excluding mount accessories)

• Height: 65 mm (2.55 in.)

• Width: 203 mm (7.99 in.)

• Depth: 203 mm (7.99 in.)

• Weight: 750 g (44 oz)

Shipping

• Height: 100 mm (3.93 in.)

• Width: 315 mm (12.40 in.)

• Depth: 265 mm (10.43)

• Weight: 1,250 g (44 oz)






Regulatory compliance*• FCC/Industry of Canada

• CE Marking



• EN 300 328

• EN 301 489

• EN 301 893

• UL/IEC/EN 60950

• EN 60601-1-1, EN60601-1-2

Regulatory model numbers• OAW-AP224 and OAW-IAP224: APIN0224



• Wi-Fi Alliance-certified 802.11a/b/g/n/ac**


Minimum operating system software versions

• AOS-W Release6.3.0.0

• InstantOS Release 3.5.0.0 (available Q3 2013)


MAXIMUM TRANSMIT POWER*** (DBM) PER TRANSMIT CHAIN


802.11B 2.4 GHZ

1 Mb/s 18.0 -92.0

2 Mb/s 18.0 -92.0

5.5 Mb/s 18.0 -90.0

11 Mb/s 18.0 -88.0

802.11G 2.4 GHZ AND 802.11A 5 GHZ

6 Mb/s 18.0 -88.0

54 Mb/s 16.0 -75.0

802.11N HT20 2.4 GHZ AND 5 GHZ

MCS0/8 18.0 -88.0

MCS7/15 14.0 -71.0


MCS0/8 18.0 -85.0

MCS7/15 14.0 -68.0

802.11AC VHT20 5 GHZ

MCS0 18.0 -88.0

MCS9 12.0 -65.0


MCS0 18.0 -85.0

MCS9 12.0 -62.0


MCS0 18.0 -82.0

MCS9 12.0 -59.0

Note: RF performance numbers for AP224 are slightly lower due to additional internal RF circuitry.

* For more country-specific regulatory information and approvals, please contact your Alcatel-Lucent representative.** Wi-Fi Alliance certification currently covers only 802.11a/b/g/n; 802.11ac will be added as soon as the Wi-Fi Alliance establishes the certification program during the second

half of 2013.*** Maximum capability of the hardware provided. Maximum transmit power is limited by local regulatory settings.

4


Figure 1. AP225 Antenna pattern plots: Horizontal or azimuth plane (top view)

Figure 2. AP225 Antenna pattern plots: Elevation plane (side view)

0345

330

315

300

285

270

255

240

225

210195

030

2.4501

2.4502

2.4503

2.4501

2.4502

2.4503

2.450 GHz 5.550 GHz

-30-25

-20

-15-10

-5

0

5

-35-40

45

60X

Y90

105

120

135

150165

180

75

0345

330

315

300

285

270

255

240

225

210195

030

-30-25-20

-15-10

-5

0

5

-35

-40

45

60X

Y90

105

120

135

150165

180

75

2.4501

2.4502

2.4503

2.4501

2.4502

2.4503

0345

330

315

300

285

270

255

240

225

210195

030

2.450 GHz 5.550 GHz

-30

-25

-20

-15-10

-5

0

5

-35-40

45

60X

Y90

105

120

135

150165

180

75

0345

330

315

300

285

270

255

240

225

210195

030

-30-25

-20

-15-10

-5

0

5

-35-40

45

60

90

105

120

135

150165

180

75

X

Y




220 SERIES APS

OAW-AP224 OmniAccess AP224: Dual-radio IEEE 802.11ac wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, RP-SMA external antenna connectivity, 2 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports 802.3at PoE), 1 x 12 V DC power interface

OAW-AP225 OmniAccess AP225: Dual-radio IEEE 802.11ac wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, integral antenna, 2 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports 802.3at PoE), 1 x 12V DC power interface

OAW-AP-AC-UN Universal AC Power Adapter Kit for Indoor OmniAccess APs – Universal, ships with 8 country-specific plug inserts - North America, Japan, United Kingdom, Italy, EC (Shuko), Australia, China, India, Korea.

OAW-AP-AC-12V18 OmniAccess12VDC/18W AC Power Adapter for compatible indoor AP models. Does not include country specific power cord.

PD-9001GR-AC OAW WLAN 1 Port 802.3at PoE Midspan 10/100/1000 30W. US power cord included.

OAW-IAP224 OmniAccess Instant AP224 Dual radio IEEE 802.11ac wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, RP-SMA external antenna connectivity, 2 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3at Power over Ethernet), 1 x 12V DC power interface. Rest of the world - Not to be used in US.

OAW-IAP224-US OmniAccess Instant AP224 Dual radio IEEE 802.11ac wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, RP-SMA external antenna connectivity, 2 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3at Power over Ethernet), 1 x 12V DC power interface.Restricted regulatory domain: United States.

OAW-IAP224-IS OmniAccess Instant AP224 Dual radio IEEE 802.11ac wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, RP-SMA external antenna connectivity, 2 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3at Power over Ethernet), 1 x 12V DC power interface.Restricted regulatory domain: Israel.

OAW-IAP224-JP OmniAccess Instant AP224 Dual radio IEEE 802.11ac wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, RP-SMA external antenna connectivity, 2 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3at Power over Ethernet), 1 x 12V DC power interface.Restricted regulatory domain: Japan.

OAW-IAP225 OmniAccess Instant AP225 Dual radio IEEE 802.11ac wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, integral antenna, 2 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3at Power over Ethernet), 1 x 12V DC power interface. Rest of the world - Not to be used in US.

OAW-IAP225-US OmniAccess Instant AP225 Dual radio IEEE 802.11ac wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, integral antenna, 2 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3at Power over Ethernet), 1 x 12V DC power interface. Restricted regulatory domain: United States.

OAW-IAP225-IS OmniAccess Instant AP225 Dual radio IEEE 802.11ac wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, integral antenna, 2 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3at Power over Ethernet), 1 x 12V DC power interface. Restricted regulatory domain : Israel.

OAW-IAP225-JP OmniAccess Instant AP225 Dual radio IEEE 802.11ac wireless access point with support for 802.11’B’ and 802.11’A/G/N/AC’ operation, integral antenna, 2 x 10/100/1000Base-T (RJ-45) Ethernet Interface (Supports 802.3at Power over Ethernet), 1 x 12V DC power interface. Restricted regulatory domain: Japan.

220 SERIES ACCESSORIES

REST ALL POWER CORD SHALL BE ORDERED SEPARATELY

OAW-AP220-MNT-C2 OmniAccess AP220 Series Access Point Mount Kit (ceiling grid): Contains 2x ceiling grid rail adapters (for Interlude and Silhouette style rails)

OAW-AP220-MNT-W1 OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface): Contains 1x flat surface wall/ceiling mount bracket

OAW-AP220-MNT-W2 OmniAccess AP220 Series Access Point Mount Kit (box style, secure, flat surface): Contains 1x flat surface wall/ceiling secure mount cradle

GENERIC INDOOR AP ACCESSORIES (SEE ALCATEL-LUCENT WEB SITE FOR PART NUMBERS)

DC power supplies

PoE injectors

Antennas

ALCATEL-LUCENT OMNIACCESS 228 ACCESS POINTS802.11AC FOR HARSH, WEATHER-PROTECTED AREAS

Rugged Alcatel-Lucent OmniAccess® 228 wireless access points (APs) deliver gigabit Wi-Fi® performance to 802.11ac mobile devices in harsh, weather-protected environments, such as warehouses, industrial freezers or enclosures inextreme environments, such as stadiums.

With a maximum data rate of 1.3 Gb/s in the 5-GHz band and 600 Mb/s in the 2.4-GHz band, OmniAccess 228 APs are three-times faster than 802.11n APs and provide performance similar to a wired connection.

The 228 APs include ClientMatch™ technology, which eliminates sticky clients by continuously gathering session performance metrics from mobile devices. This information is then used to steer each mobile device to the best AP and radio on the WLAN.

Proactive and deterministic, ClientMatch dynamically optimizes Wi-Fi client performance as users roam and RF conditions change. If a mobile device moves out of range of an AP or RF interference impedes performance, ClientMatch automatically steers it to a better AP.

With ClientMatch, 228 APs load web pages faster, deliver video streams with improved quality and support high densities of mobile devices. An 802.11ac network without ClientMatch performs no different than an 802.11n WLAN.

The rugged 228 APs additionally support priority handling and policy enforcement for individual Microsoft Lync media on the same device, including encrypted videoconferencing, voice, chat and desktop sharing.

BENEFITS• Industrial design for harsh, weather-

protected environments

¬ Extends temperature range for indoor environments that lack heating and cooling

¬ Sealed connector interfaces to lock out dust and moisture

¬ Connectorized antenna ports support high gain large public venue antennas

¬ Designed for enhanced physical security.

• Delivers 1.9 Gb/s aggregate throughput.

¬ EtherChannel link aggregation on two Gigabit Ethernet ports provides 1.9 Gb/s throughput.

• Supports aggregate data rates up to 1.9 Gb/s

¬ 802.11ac transmit beam-forming to enhance signal, throughput and multi stream operation

¬ Supports 1.3 Gb/s rates in the 5 GHz band for 802.11ac clients

¬ Supports up to 600 Mb/s for TurboQAM-enabled mobile devices operating in the 2.4 GHz band


¬ Integrated Adaptive Radio Management™ technology manages the 2.4-GHz and 5-GHz radio bands and ensures that APs stay clear of RF interference.


¬ Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference.

2

Alcatel-Lucent OmniAccess 228 ACCESS POINTSALCATEL-LUCENT ENTERPRISE DATA SHEET

• Wireless mesh

¬ Wireless mesh connections are convenient where Ethernet drops are not available.

• Security

¬ Integrated wireless intrusion protection offers threat protection and mitigation and eliminates the need for separate RF sensors and security appliances.

¬ With an OpenDNS service subscription, Instant APs deliver integrated web filtering, malware and botnet protection to every device connected to the WLAN.

¬ Encrypted IPsec VPN tunnels securely connect remote users to corporate network resources.



CHOOSE YOUR OPERATING MODEThe 228 APs offer a choice of operating modes to meet your unique management and deployment requirements.

• Controller-managed AP or Remote AP (RAP) running AOS-W. When managed by OmniAccess Controllers, 228 APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding.

• Instant™ AP running InstantOS. In Alcatel-Lucent Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs — the entire process takes about five minutes.

• Spectrum analysis identifies sources of RF interference

• Air monitor provides wireless intrusion protection

• Hybrid AP serves Wi-Fi clients and provides wireless intrusion protection and spectrum analysis


If WLAN and network requirements change, a built-in migration path allows 228 Instant APs to become part of a WLAN that is centrally managed by a Controller.

TECHNICAL SPECIFICATIONSAP228 • 2.4-GHz (600 Mb/s max) and 5-GHz (1.3

Gb/s max) radios, each with 3x3 MIMO and three combined, diplexed external antenna connectors.

WIRELESS RADIO • AP type: Indoor, dual radio, 5 GHz

802.11ac and 2.4 GHz 802.11n

¬ In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33 percent boost above the maximum supported data rate.

• Software-configurable dual radio supports 5 GHz and 2.4 GHz

• 3x3 MIMO with three spatial streams and up to 1.3 Gb/s wireless data rate


¬ 2.4000 GHz to 2.4835 GHz

¬ 5.150 GHz to 5.250 GHz

¬ 5.250 GHz to 5.350 GHz

¬ 5.470 GHz to 5.725 GHz

¬ 5.725 GHz to 5.850 GHz














¬ 5-GHz bands: +23 dBm (18 dBm per chain)

• Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems






• Transmit beam-forming (TxBF) for increased reliability in signal delivery


¬ 802.11b: 1, 2, 5.5, 11

¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

¬ 802.11n: 6.5 to 450 (MCS0 to MCS23)





POWER• Worst-case power consumption from the

AP: 23W


• Power over Ethernet (PoE+): 802.3at-compliant

ANTENNAS• Six RP-SMA connectors for external

antennas

OTHER INTERFACES• Two 10/100/1000BASE-T Ethernet



¬ Load balancing support to achieve platform throughput greater than one Gb/s

¬ PoE-PD: 802.3at PoE+

• Serial console interface (Micro USB)

MOUNTING• Optional mounting kits:

¬ AP-130-MNT or AP-220-MNT-W1 are directly compatible

¬ 270 Series outdoor AP mounts (AP-270-MNT-V1, AP-270-MNT-V2, AP-270-MNT-H1, AP-270-MNT-H2) are compatible when the AP-270-MNT-ADP adapter is utilized

3

Alcatel-Lucent OmniAccess 228 ACCESS POINTSALCATEL-LUCENT ENTERPRISE DATA SHEET


accessories):

¬ 222 mm (L) x 150 mm (W) x 75 mm (H) (8.5” (L) x 6” (W) x 2.5” (H))

¬ 1.225 kg (2.700 lbs)

ENVIRONMENTAL

• Operating:



¬ Storage and transportation:


¬ Operating altitude: 3,000 m

REGULATORY• FCC/Industry of Canada

• CE Marked



• EN 300 328

• EN 301 489

• EN 301 893

• UL/IEC/EN 60950

• EN 60601-1-1, EN60601-1-2

For more country-specific regulatory information and approvals, see your Alcatel-Lucent Enterprise representative.

REGULATORY MODEL NUMBERS• OAW-AP-228 and OAW-IAP-228:

APIN0228



• Wi-Fi Alliance certified 802.11a/b/g/n/ac


MINIMUM OPERATING SYSTEM SOFTWARE VERSIONS

• AOS-W 6.4.3.0

• Instant 4.1.2.0

RF PERFORMANCE TABLE

Maximum transmit power (dBm)per transmit chain

Receiver sensitivity (dBm)per receive chain

802.11B

1 Mb/s 23.0 -92.0

2 Mb/s 23.0 -92.0

5.5 Mb/s 23.0 -90.0

11 Mb/s 23.0 -88.0

802.11G 2.4 GHZ AND 802.11A 5 GHZ

6 Mb/s 23.0 -88.0

54 Mb/s 18.0 -75.0


MCS0/8 23.0 -88.0

MCS7/15 17.0 -71.0


MCS0/8 23.0 -85.0

MCS7/15 17.0 -68.0


MCS0 23.0 -88.0

MCS9 16.0 -65.0


MCS0 23.0 -85.0

MCS9 16.0 -62.0


MCS0 23.0 -82.0

MCS9 16.0 -59.0




AP228 ACCESS POINTS

OAW-AP228 OmniAccess AP228 Temperature Hardened Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors

OAW-IAP228-RW OmniAccess IAP228 Temperature Hardened Wireless Instant Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors - Unrestricted Regulatory Domain. These products should be considered as `Rest of World' products and MUST NOT be used for deployments in the United States, Japan or Israel

OAW-IAP228-US OmniAccess IAP228 Temperature Hardened Wireless Instant Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors — Restricted regulatory domain: United States

OAW-IAP228-JP OmniAccess IAP228 Temperature Hardened Wireless Instant Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors — Restricted regulatory domain: Japan

AP228 ACCESSORIES

AP-130-MNT OmniAcess AP130 Series Access Point Wall / Ceiling Mounting Kit

AP-220-MNT-W1 OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface). Contains 1xflat surface wall/ceiling mount bracket.

AP-270-MNT-ADP Omniaccess Adapter to allow AP-228 to use outdoor AP-270 series brackets

AP-270-MNT-V1 OAW-AP270 Series Access Point Long Mount Kit. Pole/Wall Mount for OAW-AP270 300 mm from vertical mounting asset.

AP-270-MNT-V2 OAW-AP270 Series Access Point Short Mount Kit. Pole/Wall Mount for OAW-AP270 75-mm from vertical mounting asset

AP-270-MNT-H1 OAW-AP270 Series Access Point short mounting bracket to mount to horizontal surfaces

AP-270-MNT-H2 OAW-AP270 Series Access Point Horizontal or Vertical Flush Mount kit


PD-9001GR-AC OAW WLAN 1 Port 802.3at PoE Midspan 10/100/1000 30W. US power cord included. Rest all power cord shall be ordered separately.

PD-9001GO-DC Outdoor, 12 - 24 DC in, Requires 9001GO mount for most applications. Does not ship with a cable (order separately).

PD-9001GO-NA OmniAccess 1 Port 802.3at PoE Midspan 10/100/1000 30W Outdoor; NA power cord

PD-9001GO-INTL OmniAccess 1 Port 802.3at PoE Midspan 10/100/1000 30W Outdoor; EU/International

ALCATEL-LUCENT ENTERPRISEOMNIACCESS 270 SERIES OUTDOOR ACCESS POINTSETTING A HIGHER STANDARD FOR 802.11AC

The innovative Alcatel-Lucent OmniAccess® 270 series outdoor wireless access points (APs) are aesthetically designed to deliver gigabit Wi-Fi® performance to 802.11ac mobile devices under any weather conditions. The OmniAccess 270 series is also the only outdoor AP that enables 802.11n clients to operate three times faster at greater distances.

Purpose-built to survive in the harshest outdoor environments, OmniAccess 270 series APs withstand exposure to extreme high and low temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial-strength surge protection.

With a maximum data rate of 1.3 Gb/s in the 5-GHz band and 600 Mb/s in the 2.4-GHz band, OmniAccess 270 series outdoor APs support concurrent dual-radio operation at speeds that greatly exceed Fast Ethernet.

To eliminate sticky client behavior and ensure consistently high performance, every OmniAccess 270 AP includes ClientMatch™ technology, which gathers session performance metrics that steer mobile devices to the best AP and radio on the WLAN in real time.

FEATURES• Reliable and predictable Wi-Fi

performance

¬ Patented ClientMatch™ technology ensures that roaming clients associate with the best AP to maximize performance

¬ AppRF™ technology identifies and prioritizes applications on the network


¬ Capable of part-time or dedicated spectrum analysis, which scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference

• Integrated Adaptive Radio Management™ technology manages the 2.4-GHz and 5-GHz radio bands and ensures that APs stay clear of RF interference

• Air monitoring: Dedicated scan mode provides wireless intrusion protection

• Hybrid AP: Serves Wi-Fi clients and simultaneously provides wireless intrusion protection and spectrum analysis

BENEFITS• Innovative industrial design

¬ Eliminates installation complexity

¬ Inconspicuous design that improves aesthetics

¬ Delivers IP66- and IP67-rated protection from the elements


• Limited lifetime warranty – an industry first for outdoors

OPERATING MODESThe 270 series of outdoor APs offers a choice of operating modes to meet your unique management and deployment requirements.

Controller-managed AP or Remote AP (RAP) running AOS-W When managed by OmniAccess Mobility Controllers, the OmniAccess 270 series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding.

Alcatel-Lucent Instant AP running InstantOS™ In Instant mode, one AP automatically distributes the network configuration to other APs. Just power-up one Instant AP, configure it over the air, and plug in the

OmniAccess 275 OmniAccess 277OmniAccess 274

2

Alcatel-Lucent OmniAccess 270 Series Outdoor Access PointALCATEL-LUCENT ENTERPRISE DATA SHEET

other APs – the entire process takes about five minutes.

If WLAN and network requirements change, a built-in migration path allows OmniAccess 270 series Instant APs to become part of a WLAN that is centrally managed by a Mobility Controller.

TECHNICAL SPECIFICATIONSOmniAccess 270 series AP model specifications


¬ 2.4-GHz and 5-GHz radios, each with 3x3 MIMO and three combined, diplexed external antenna connectors


¬ 2.4-GHz and 5-GHz radios, each with 3x3 MIMO and three integrated omnidirectional antennas


¬ 2.4 GHz and 5 GHz radios, each with 3x3 MIMO and three integrated 80º H x 80º V beamwidth directional antennas

Wireless radio specifications• AP type: Outdoor, dual radio, 5-GHz

802.11ac and 2.4-GHz 802.11n

¬ In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost to deliver up to 600 Mb/s.


¬ 2.4000 GHz to 2.4835 GHz

¬ 5.150 GHz to 5.250 GHz

¬ 5.250 GHz to 5.350 GHz

¬ 5.470 GHz to 5.725 GHz

¬ 5.725 GHz to 5.875 GHz









¬ 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (with TurboQAM clients)





¬ 5-GHz bands: +28 dBm (23 dBm per chain)

• Advanced cellular coexistence (ACC) feature to minimize interference from cellular systems






• Explicit transmit beam-forming (TxBF) for increased reliability in signal delivery


¬ 802.11b: 1, 2, 5.5, 11

¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

¬ 802.11n: 6.5 to 450 (MCS0 to MCS23, 1 to 3 spatial streams)

¬ 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, 1 to 3 spatial streams)




Power• Maximum power consumption: 23 W

• Direct AC source: 100 V to 240 V AC

• Power over Ethernet (PoE): 48 V DC (nominal) 802.3at-compliant source

Antennas• OAW-AP274: Six N-type female

connectors for external antennas

• OAW-AP275: Six integrated omnidirectional antennas for 3x3 MIMO with maximum antenna gain of 5 dBi in 2.4 GHz and 5 dBi in 5 GHz. Built-in antennas are optimized for horizontal mounted orientation of OAW-AP275.

• OAW-AP277: Six integrated multipolarized directional antennas with 80º H x 80º V beamwidths for 3 x 3 MIMO with maximum antenna gain of 6.5 dBi in 2.4 GHz and 5 GHz

Other Interfaces• One PoE+ PD port 10/100/1000Base-T

Ethernet network interface (RJ-45)

• One port 10/100/1000Base-T Ethernet network interface (RJ-45)

• AC power interface, power cords sold separately

• Serial console interface (micro USB)

• Reset button

• Visual indicator (LED):

¬ Power/system status; automatically disabled after initial operation period

Mounting• Must be ordered separately


¬ AP-270-MNT-V1: OmniAccess 270 series AP long mount kit for pole/wall mounting. Reduces impact of obstruction by pole or extends away from corner

¬ AP-270-MNT-V2: OmniAccess 270 series AP short mount kit for pole/wall mounting

¬ AP-270-MNT-H1: OmniAccess 270 series AP hanging bracket for horizontal or inclined surface or pole mounting

Physical dimensions OAW-AP274

• Excluding mount; with aesthetic cover:

¬ Width: 23 cm (9.0 in))

¬ Depth: 24 cm (9.4 in))

¬ Height: 19 cm (7.5 in)

¬ Weight: 2.7 kg (6 lb)

• Excluding mount; without aesthetic cover

¬ Width: 23 cm (9 in))

¬ Depth: 24 cm (9.4 in)



OAW-AP275

• Excluding mount:

¬ Width: 23 cm (9.0 in)

¬ Depth: 24 cm (9.4 in)



OAW-AP277

• Excluding mount; with aesthetic cover

¬ Width: 23cm (9.0 in)

¬ Depth: 22cm (8.6 in)

¬ Height: 13cm (5.1 in)

¬ Weight: 2.1kg (4.7 lbs)

Environmental specifications

• Operating:



3




• Operating altitude: 3000 m

• Chassis rating: IP66 and IP67

• Wind survivability: Up to 165 mph

• Shock and vibration: ETSI 300-19-2-4 spec T41.E 4M3

Regulatory• FCC/Industry Canada (IC)

• CE Marked



• EN 300 328

• EN 301 489

• EN 301 893

• UL/IEC/EN 60950

• EN 60601-1-1, EN60601-1-2

For more country-specific regulatory information and approvals, please see your Alcatel-Lucent representative. Regulatory model numbers

• OAW-AP274 and OAW-IAP274: APEX0101

• OAW-AP275 and OAW-IAP275: APEX0100



• Wi-Fi Alliance certified 802.11a/b/g/n/ac


Minimum operating system soft-ware versions

• AOS-W 6.4 (AP274, AP275),

• AOS-W 6.4.3 (AP277)

• Instant 4.1 (AP274, AP275),

• Instant 4.1.2 (AP277)




IEEE 802.11b 2.4 GHz

1 Mb/s 23.0 -92.0

2 Mb/s 23.0 -92.0

5.5 Mb/s 23.0 -90.0

11 Mb/s 23.0 -88.0

IEEE 802.11g 2.4 GHz and 802.11a 5 GHz

6 Mb/s 23.0 -88.0

54 Mb/s 18.0 -75.0

IEEE 802.11n HT20 2.4 GHz and 5 GHz

MCS0/8 23.0 -88.0

MCS7/15 17.0 -71.0

IEEE 802.11n HT40 2.4 GHz and 5 GHz

MCS0/8 23.0 -85.0

MCS7/15 17.0 -68.0


MCS0 23.0 -88.0

MCS9 16.0 -65.0

IEEE 802.11ac VHT40 5 GHz

MCS0 23.0 -85.0

MCS9 16.0 -62.0

IEEE 802.11ac VHT80 5 GHz

MCS0 23.0 -82.0

MCS9 16.0 -59.0

4




AP270 series Access Points

OAW-AP274 OmniAccess AP274: Outdoor access point designed for gigabit Wi-Fi performance. Supports 802.11b and 802.11a/g/n/ac. 3x3 MIMO with three spatial streams, providing up to 1.3 Gb/s data rate. Supports two 10/100/1000 Base-T (RJ-45) Ethernet interfaces. Supports 802.3at Power over Ethernet. Six N-type female interfaces for external antenna support. Horizontal, wall or pole-mounted using the mounting bracket (ordered separately)

OAW-AP275 OmniAccess AP275: Outdoor access point designed for gigabit Wi-Fi performance. Supports 802.11b and 802.11a/g/n/ac. 3x3 MIMO with three spatial streams, providing up to 1.3 Gb/s data rate. Supports two 10/100/1000Base-T (RJ-45) Ethernet interfaces. Supports 802.3at Power over Ethernet. Six integrated omni-directional antennas. Horizontal, wall or pole-mounted using the mounting bracket (ordered separately)

OAW-IAP274-IS OmniAccess instant AP274 outdoor access point designed for gigabit Wi-Fi performance. Supports 802.11b and 802.11a/g/n/ac’. 3x3 MIMO with three spatial streams, providing up to 1.3 Gbps data rate. Supports two 10/100/1000 Base-T (RJ-45) Ethernet interface (Supports 802.3at Power over Ethernet). 6 N-type female interfaces for external antenna support. Horizontal, Wall or poll mounted using the mounting bracket (ordered seperately). Restricted regulatory domain: Israel.

OAW-IAP274-JP OmniAccess instant AP274 outdoor access point designed for gigabit Wi-Fi performance. Supports 802.11b and 802.11a/g/n/ac’. 3x3 MIMO with three spatial streams, providing up to 1.3 Gbps data rate. Supports two 10/100/1000 Base-T (RJ-45) Ethernet interface (Supports 802.3at Power over Ethernet). 6 N-type female interfaces for external antenna support. Horizontal, Wall or poll mounted using the mounting bracket (ordered seperately). Restricted regulatory domain: Japan.

OAW-IAP275-IS OmniAccess Instant AP275 outdoor access point designed for gigabit Wi-Fi performance. Supports 802.11b and 802.11a/g/n/ac’. 3x3 MIMO with three spatial streams, providing up to 1.3 Gbps data rate. Supports two 10/100/1000 Base-T (RJ-45) Ethernet interface (Supports 802.3at Power over Ethernet). Six integrated omni-directional antennas. Horizontal, Wall or poll mounted using the mounting bracket (ordered seperately). Restricted regulatory domain: Israel

OAW-IAP275-JP OmniAccess Instant AP275 outdoor access point designed for gigabit Wi-Fi performance. Supports 802.11b and 802.11a/g/n/ac’. 3x3 MIMO with three spatial streams, providing up to 1.3 Gbps data rate. Supports two 10/100/1000 Base-T (RJ-45) Ethernet interface (Supports 802.3at Power over Ethernet). Six integrated omni-directional antennas. Horizontal, Wall or poll mounted using the mounting bracket (ordered seperately). Restricted regulatory domain: Japan

OAW-AP277 OmniAccess AP277 Outdoor access point designed for gigabit Wi-Fi performance. Supports 802.11b and 802.11a/g/n/ac. 3 x 3 MIMO with three spatial streams, providing up to 1.3 Gb/s data rate. Supports two 10/100/1000Base-T (RJ-45) Ethernet interfaces. Supports 802.3at Power over Ethernet. Six integrated multipolarized directional antennas with 80º H x 80º V beamwidths. Horizontal, wall or pole-mounted using the mounting bracket (ordered separately).

OAW-IAP277-RW OmniAccess Instant AP277 Outdoor access point designed for gigabit Wi-Fi performance. Supports 802.11b and 802.11a/g/n/ac. 3x3 MIMO with three spatial streams, providing up to 1.3 Gb/s data rate. Supports two 10/100/1000Base-T (RJ-45) Ethernet interfaces. Supports 802.3at Power over Ethernet. Six integrated multipolarized directional antennas with 80º H x 80º V beamwidths. Horizontal, wall or pole-mounted using the mounting bracket (ordered separately). Restricted regulatory domain: Rest of World.

OAW-IAP277-IS OmniAccess Instant AP277 Outdoor access point designed for gigabit Wi-Fi performance. Supports 802.11b and 802.11a/g/n/ac. 3 x 3 MIMO with three spatial streams, providing up to 1.3 Gb/s data rate. Supports two 10/100/1000Base-T (RJ-45) Ethernet interfaces. Supports 802.3at Power over Ethernet. Six integrated multipolarized directional antennas with 80º H x 80º V beamwidths. Horizontal, wall or pole-mounted using the mounting bracket (ordered separately). Restricted regulatory domain: Israel.

OAW-IAP277-JP OmniAccess Instant AP277 Outdoor access point designed for gigabit Wi-Fi performance. Supports 802.11b and 802.11a/g/n/ac. 3 x 3 MIMO with three spatial streams, providing up to 1.3 Gb/s data rate. Supports two 10/100/1000Base-T (RJ-45) Ethernet interfaces. Supports 802.3at Power over Ethernet. Six integrated multipolarized directional antennas with 80º H x 80º V beamwidths. Horizontal, wall or pole-mounted using the mounting bracket (ordered separately). Restricted regulatory domain: Japan.

AP270 series accessories


PD-9001GR-AC OAW WLAN 1 Port 802.3at PoE Midspan 10/100/1000 30W. US power cord included. Power cords for other countries should be ordered separately.

PD-9001GO-DC PD-9001GO-DC 30W 802.3at Outdoor PoE Midspan injector, 12 V to 24 V DC in, 10/100/1000Base-T Ethernet, surge protected, North America power cord

OAW-PD9001GO-NA OmniAccess 1 Port 802.3at PoE Midspan 10/100/1000 30W Outdoor; North America power cord

OAW-PD9001GOINT OmniAccess 1 Port 802.3at PoE Midspan 10/100/1000 30W Outdoor; EU/International power cord

AP-270-MNT-V1 OAW-AP270 Series Access Point Long Mount Kit. Pole/Wall Mount for OAW-AP270 300 mm from vertical mounting asset

AP-270-MNT-V2 OAW-AP270 Series Access Point Short Mount Kit. Pole/Wall Mount for OAW-AP270 75 mm from vertical mounting asset

AP-270-MNT-H1 OmniAccess 270 Series Outdoor AP Hanging Mount Kit. Mount for hanging or tilt install for AP270

AP-270-MNT-H2 OmniAccess 270 Series Outdoor AP Flush Mount Kit

AP270 series accessories



ALCATEL-LUCENT OMNIACCESS 320 SERIES ACCESS POINTSBRINGING A SWITCH-LIKE EXPERIENCE TO 802.11AC

Multifunctional Alcatel-Lucent OmniAccess® 320 series wireless access points (APs) provide the best 802.11ac Wi-Fi® connectivity and user experience. Featuring our Enhanced ClientMatch and Beacon technologies, the 320 series enables the highest capacity, performance, and efficiency in extremely high-density environments.

With a maximum concurrent data rate of 1,733 Mb/s in the 5 GHz band and 800 Mb/s in the 2.4 GHz band (aggregated date rate of 2.5 Gb/s), the 320 series APs deliver best-in-class next-generation .11ac Wi-Fi infrastructure for the highest-den-sity environments. The high-performance and high-density 802.11ac 320 series supports multi-user multiple-input and multiple-output (MU-MIMO) and 4 spatial streams (4SS). It provides simultaneous multicast data transmission to multiple devices, maximizing data throughput and improving network efficiency.

The 320 series includes the patent-pending Enhanced ClientMatch technology that extends the client steering technology with MU-MIMO client awareness. It automatically identifies MU-MIMO capable mobile devices and steers those devices to the closest MU-MIMO capable Aruba® access point. By grouping MU-MIMO capable mobile devices together, the network starts taking advantage of the simultaneous transmission to these devices, increasing its overall capacity. These dynamic roaming policies that are based on device types, help customers achieve the best wireless local area network (WLAN) performance in a mixed device environment during the technology transition period.

The 320 series has an integrated Bluetooth® Beacon that simplifies the remote management of a network of large-scale battery-powered beacons

while also providing advanced location and indoor way-finding, and proximity-based push notification capabilities. It allows businesses to leverage mobility context to develop applications that deliver an enhanced user experience and increase the value of the wireless network for organizations.

UNIQUE BENEFITS• Dual-radio 4x4 802.11ac AP with

MU-MIMO

¬ Supports up to 1,733 Mb/s in the 5 GHz band (with 4SS or very high throughput (VHT) 80 clients) and 800 Mb/s in the 2.4 GHz band (with 4SS/VHT40 clients).

• Built-in Bluetooth Low-Energy (BLE) radio

¬ Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Beacons at the same time.

¬ Simplifies battery-powered beacon management.


¬ Minimizes interference from 3G/4G cellular networks, distributed antenna systems, and commercial small cell/femtocell equipment.


¬ Supports priority handling and policy enforcement for unified communication apps, including Microsoft® Skype® for Business with encrypted videoconferencing, voice, chat and desktop sharing.

2

Alcatel-Lucent OmniAccess 320 SERIES ACCESS POINTSALCATEL-LUCENT ENTERPRISE DATA SHEET

• RF Management

¬ Adaptive Radio Management™ (ARM) technology automatically assigns channel and power settings, provides airtime fairness, and ensures that APs stay clear of all sources of radio frequency interference (RFI) to deliver reliable, high-performance WLANs.

¬ The OmniAccess 320 series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, virtual private network (VPN) tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.

• Support for additional 5 GHz bands

¬ Supports software upgrades to enable additional 5 GHz spectrums when governments expand available frequencies.


¬ Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4 GHz and 5 GHz radio bands to identify sources of RFI.

• Intelligent app visibility and control

¬ AppRF™ technology leverages deep packet inspection to classify and block, prioritize or limit bandwidth for over 1,500 enterprise apps or groups of apps.

• Security

¬ Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances.

¬ IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats.



CHOOSE YOUR

OPERATING MODEOmniAccess 320 series APs offer a choice of operating modes to meet your unique management and deployment requirements.

• Controller-managed mode — when managed by Mobility Controllers, OmniAccess 320 series APs offer centralized configuration, data encryption, policy enforcement, and network services, as well as distributed and centralized traffic forwarding.

• Instant mode — In Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs — the entire process takes about five minutes. If WLAN requirements change, a built-in migration path allows the 320 series Instant APs to become part of a WLAN that is managed by a Mobility controller.

• Remote AP (RAP) for branch deployments.

• Air monitor (AM) for wireless IDS, rogue detection and containment.

• Spectrum analyzer, dedicated or hybrid, for identifying sources of RFI.

• Secure enterprise mesh.

* Available H2 2015

OAW-AP320 SERIES SPECIFICATIONS


¬ 5 GHz (1,733 Mb/s max rate) and 2.4 GHz (800 Mb/s max rate) radios, each with 4x4 MIMO support and a total of eight integrated omni-directional downtilt antennas.


¬ 5 GHz (1,733 Mb/s max rate) and 2.4 GHz (800 Mb/s max rate) radios, each with 4x4 MIMO support and a total of four combined, diplexed (dual-band) external RP-SMA antenna connectors.

WI-FI RADIO SPECIFICATIONS• AP type: Indoor, dual-radio, 5 GHz

802.11ac and 2.4 GHz 802.11n 4x4 MIMO.

• Software-configurable dual-radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1).

• Four spatial stream SU-MIMO for up to 1,733 Mb/s wireless data rate to a single client device.

• Three spatial stream MU-MIMO for up to 1,300 Mb/s wireless data rate to up to three MU-MIMO capable client devices simultaneously.

• Support for up to 255 associated client devices per radio, and up to 16 basic service set identifiers (BSSIDs) per radio.


¬ 2.400 to 2.4835 GHz

¬ 5.150 to 5.250 GHz

¬ 5.250 to 5.350 GHz

¬ 5.470 to 5.725 GHz

¬ 5.725 to 5.850 GHz

• Available channels: Dependent on configured regulatory domain.

• Dynamic frequency selection (DFS) optimizes the use of available RF spectrum.





¬ 802.11b: binary phase-shift keying (BPSK), quality phase-shift keying (QPSK), complementary code keying (CCK)

¬ 802.11a/g/n/ac: BPSK, QPSK, 16-quadrature amplitude modulation (QAM), 64-QAM, 256-QAM





¬ Note: conducted transmit power levels exclude antenna gain. For total equivalent isotropically radiated power (EIRP) transmit power, add antenna gain

• Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks.

• Maximum ratio combining (MRC) for improved receiver performance.

• Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance.

• Short guard interval for 20-MHz, 40-MHz and 80-MHz channels.

• Space-time block coding (STBC) for increased range and improved reception.

• Low-density parity check (LDPC) for high-efficiency error correction and increased throughput.

• Transmit beamforming (TxBF) for increased signal reliability and range.


¬ 802.11b: 1, 2, 5.5, 11

¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

¬ 802.11n: 6.5 to 450 (MCS0 to MCS23)




• 802.11n/ac packet aggregation: Aggregated Mac Protocol Data Unit (A-MPDU), Aggregated Mac Service Data Unit (A-MSDU)

3


WI-FI ANTENNAS• OAW-AP324/OAW-IAP324: Four RP-SMA

connectors for external dual-band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 2.5 dB in 2.4 GHz and 1.5 dB in 5 GHz.

• OAW-AP325/OAW-IAP325: Eight integrated downtilt omni-directional antennas for 4x4 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 5.0 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling-mounted orientation of the AP. The downtilt angle for maximum gain is approximately 30 degrees.

OTHER INTERFACES• Two 10/100/1000BASE-T Ethernet



¬ Link Aggregation support to achieve platform throughput up to 2 Gb/s


¬ PoE-PD: 48 V DC (nominal) 802.3af or 802.3at PoE

• DC power interface, accepts 2.1/5.5mm center-positive circular plug with 9.5mm length


• Bluetooth Low Energy (BLE) radio

¬ Up to 4 dBm transmit power (class 2) and -94 dBm receive sensitivity

¬ Integrated antenna, -5 dBi gain (30 degrees downtilt)

¬ Can be disabled with configuration

• Visual indicators (tri-color LEDs): For system and radio status

• Reset button: Factory reset (during device power-up)



POWER• Maximum (worst-case) power

consumption: 20 W (802.3at PoE), 13.5 W (802.3af PoE) or 18.5 W (DC)

¬ Excludes power consumed by external USB device (and internal overhead); this could add up to 6 W (PoE) or 5.5 W (DC) for 5 W/1 A USB device

• Maximum (worst-case) power consumption in idle mode: 8 W (PoE) or 7 W (DC)

• Direct DC source: 48 V DC nominal, +/- 5%

• Power over Ethernet (PoE): 48 V DC (nominal) 802.3af/802.3at compliant source

¬ Unrestricted functionality with 802.3at PoE

¬ Power-save mode with reduced functionality from 802.3af PoE

• USB port disabled

• Second Ethernet port disabled

• 2.4 GHz radio in 1x1:1 mode



MOUNTING• The AP ships with two (white) mounting

clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling.

• Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section for details.


accessories):

¬ 203 mm (W) x 203 mm (D) x 57 mm (H) 8.0in. (W) x 8.0in. (D) x 2.2in. (H)

¬ 950 g/34 oz


¬ 315 mm (W) x 265 mm (D) x 100 mm (H) 12.4in. (W) x 10.4in. (D) x 3.9in. (H)

¬ 1,350 g/48 oz

ENVIRONMENTAL• Operating:





REGULATORY• FCC/Industry of Canada

• CE Marked



• EN 300 328

• EN 301 489

• EN 301 893

• UL/IEC/EN 60950

• EN 60601-1-1, EN60601-1-2

For more country-specific regulatory information and approvals, please see your representative for Alcatel-Lucent products.

RELIABILITY• MTBF: 739,935 h (84.5 years) at +25º C

operating temperature (AP-325)

REGULATORY MODEL NUMBERS• OAW-AP324 and OAW-IAP324: APIN0324





• Bluetooth SIG interoperability certification


MINIMUM OPER ATING SYSTEM SOFTWARE VERSIONS

• AOS-W 6.4.4.0


4


RF PERFORMANCE TABLE

MAXIMUM TRANSMIT POWER (DBM)PER TRANSMIT CHAIN

RECEIVER SENSITIVITY (DBM)PER RECEIVE CHAIN

802.11b 2.4 GHz

1 Mb/s 18.0 -97.0

11 Mb/s 18.0 -89.0

802.11G 2.4 GHz

6 Mb/s 18.0 -93.0

54 Mb/s 18.0 -75.0

802.11N HT20 2.4 GHz

MCS0/8/16 18.0 -92.0

MCS7/15/23 16.0 -72.0

802.11N HT40 2.4 GHz

MCS0/8/16 18.0 -90.0

MCS7/15/23 16.0 -70.0

802.11A 5 GHz

6 Mb/s 18.0 -93.0

54 Mb/s 16.5 -75.0

802.11N HT20 5 GHz

MCS0/8/16 18.0 -92.0

MCS7/15/23 16.0 -72.0

802.11N HT40 5 GHz

MCS0/8/16 18.0 -89.0

MCS7/15/23 16.0 -69.0

802.11AC VHT20 5 GHz

MCS0 18.0 -92.0

MCS9 14.0 -65.0


MCS0 18.0 -89.0

MCS9 14.0 -62.0


MCS0 18.0 -86.0

MCS9 14.0 -59.0

Maximum capability of the hardware provided (excluding antenna gain). Maximum transmit power is limited by local regulatory settings.

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. (September 2015)



AP320 SERIES ACCESS POINTS

OAW-AP324 OmniAccess AP324 Wireless Access Point, 802.11n/ac, 4x4:4, dual radio, antenna connectors.

OAW-IAP324-RWOmniAccess AP324 Wireless Instant Access Point, 802.11n/ac, 4x4:4, dual radio, antenna connectors - Restricted regulatory domain: Rest of World. Not to be used in US, Israel, Japan.

OAW-IAP324-USOmniAccess AP324 Wireless Instant Access Point, 802.11n/ac, 4x4:4, dual radio, antenna connectors - Restricted regulatory domain: United States

OAW-IAP324-JPOmniAccess AP324 Wireless Instant Instant Access Point, 802.11n/ac, 4x4:4, dual radio, antenna connectors - Restricted regulatory domain: Japan

OAW-IAP324-ISOmniAccess AP324 Wireless Instant Access Point, 802.11n/ac, 4x4:4, dual radio, antenna connectors - Restricted regulatory domain: Israel

OAW-AP325 OmniAccess AP325 Wireless Access Point, 802.11n/ac, 4x4:4, dual radio, integrated antennas

OAW-IAP325-RWOmniAccess AP325 Wireless Instant Access Point, 802.11n/ac, 4x4:4, dual radio, integrated antennas - Restricted regulatory domain: Rest of World. Not to be used in US, Israel, Japan.

OAW-IAP325-USOmniAccess AP325 Wireless Instant Access Point, 802.11n/ac, 4x4:4, dual radio, integrated antennas - Restricted regulatory domain: United States

OAW-IAP325-JPOmniAccess AP325 Wireless Instant Access Point, 802.11n/ac, 4x4:4, dual radio, integrated antennas - Restricted regulatory domain: Japan

OAW-IAP325-ISOmniAccess AP325 Wireless Instant Access Point, 802.11n/ac, 4x4:4, dual radio, integrated antennas - Restricted regulatory domain: Israel


AP-220-MNT-C1OmniAccess Access Point Mount Kit (ceiling grid). Contains 2x ceiling grid rail adapters (for flat rails).Color: black. Spare.

AP-220-MNT-C2OmniAccess AP220 Series Access Point Mount Kit (ceiling grid). Contains 2x ceilinggrid rail adapters (for Interlude and Silhouette style rails). Color: black

AP-220-MNT-W1OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface). Contains 1xflat surface wall/ceiling mount bracket. Color: black

AP-220-MNT-W1WOmniAccess Access Point Mount Kit (basic, flat surface). Contains 1x flat surface wall/ceiling mount bracket. Color: white

AP-220-MNT-W2OmniAccess AP220 Series Access Point Mount Kit (box style, secure, flat surface).Contains 1x flat surface wall/ceiling secure mount cradle. Color: black

AP-220-MNT-W2WOmniAccess Access Point Mount Kit (box style, secure, flat surface). Contains 1x flat surfacewall/ceiling secure mount cradle (color: white).

AP-320-MNT-T OmniAccess 320 Series Access Points ceiling tile mount kit



OTHER ACCESSORIES

AP-325-CVR-20 Kit of 20 snap-on covers for OAW-AP325. Plain white, non-glossy, with holes for LED indicators.

AP-AC-12V30UNOmniAccess 12 V/30 W indoor Access Point AC power adapter. Universal, ships with 8country specific plug inserts (US, EU, UK, Australia, China, Korea, Argentina, Brazil)

PD-9001GR-ACOAW WLAN 1 Port 802.3at PoE Midspan 10/100/1000 30 W. US power cord included.Rest all power cord shall be ordered separately.



OMNIACCESS 4000 WLAN CONTROLLERS

OAW-4005 OAW-4010 OAW-4030

Maximum campus AP licenses 16 32 64

Maximum Remote AP licenses 16 32 64

Maximum concurrent users/devices 1,024 2,048 4,096

Maximum VLANS 4,094 4,094 4,094

Active firewall sessions 16,384 32,768 65,536

Concurrent GRE tunnels (system BSSIDS) 512 1,024 2,048

Concurrent IP sec sessions 512 1,024 2,048

Concurrent SSL fallback sessions 512 1,024 2,048

Firewall throughput 2 Gbps 4 Gbps 8 Gbps

Encrypted throughput (3DES , AES -CBC) 1.2 Gbps 2.4 Gbps 2.4 Gbps

Encrypted throughput (AES-CCM) 2.2 Gbps 3.6 Gbps 4.4 Gbps

DIMENSIONS (H x W x D) 4.1cm x 20cm x 20cm(1.6” x 7.9” x 7.9”)

4.4cm x 31.8cm x 33.7cm(1.7” x 12.5” x 13.3”)

4.4cm x 30.5cm x 21.1cm(1.7” x 12” x 8.3”)

10/100/1000BASE -T ports 4 RJ-45 16 RJ-45, 2 SFP 8 RJ-45 / 8 SFP (combo)

10 Gigabit Ethernet ports (SFP+) N/A N/A N/A

MANAGEMENTPORTS ,CONSOLE , USB MGT: 0, CON : mUSB, USB: 1 MGT: 1, CON : mUSB+RJ45, USB: 2 MGT: 1, CON: mUSB+RJ45, USB: 1

WLAN at a Glance

PRODUCT LINE MATRIX: WIRELESS LAN (WLAN) CONTROLLER

WIRELESS LAN (WLAN) CONTROLLER PRODUCT LINE MATRIX

2

OmniAccess Wireless Access Points at a GlanceALCATEL-LUCENT ENTERPRISE PRODUCT LINE MATRIX: WIRELESS LAN (WLAN) CONTROLLER

OMNIACCESS 4000 WLAN CONTROLLERS

OAW-4005 OAW-4010 OAW-4030

Power-over-Ethernet ports (802.3af/802.3at) No 12 RJ45 (max 150W) No

Power options PoE (port 1), External AC Adapter Integrated AC power supply Integrated AC power supply

Redundant power No No No

Maximum power consumption 16.6 watts 190 watts (with PoE) 55 watts

WI-FI standards support 802.11 a/b/g/n/ac

Encryption types WEP, TKIP, DES, AES-CCMP, 3DES, AES CBC

Authentication types WPA-Enterprise, WPA-PSK, WPA2-Enterprise, WPA2-PSK, 802.1X, MAC address, captive portal

Hardware warranty One year

Software warranty 90 days

Minimum Arubaos Version 6.4.1.0


3


OMNIACCESS 4X50 WLAN CONTROLLER

OAW-4450 OAW-4550 OAW-4650 OAW-4750

Maximum campus AP licenses 256 512 1,024 2,048

Maximum Remote AP licenses 256 512 1,024 2,048

Maximum concurrent users/devices 8192 16,384 24,576 32,768

Maximum VLANs 2048 4,094 4,094 4,094

Active firewall sessions 1,000,000 2,015,291 2,015,291 2,015,291

Concurrent GRE tunnels (system BSSIDs) 4096 8,192 16,384 32,768

Concurrent IPsec sessions 4096 16,384 24,576 32,768

Concurrent SSL fallback sessions 4096 8,192 8,192 8,192

Firewall throughput 15 Gbps 20 Gbps 40 Gbps 40 Gbps

Encrypted throughput (3DES, AES-CBC) 10 Gbps 10 Gbps 30 Gbps 40 Gbps

Encrypted throughput (AES-CCM) 6 Gbps 6 Gbps 20 Gbps 40 Gbps

Form factor/footprint 1 RU 1 RU 1 RU 1 RU

Auto-negotiating 10/100/1000BASE-T ports 4 RJ-45 / 4 SFP (combo) 2 (combo) 2 (combo) 2 (combo)

Gigabit Ethernet ports (GBIC or SFP) 2 (combo) 2 (combo) 2 (combo) 2 (combo)

10 Gigabit Ethernet ports (XFP) 2 SFP+ 4 SFP+ 4 SFP+ 4 SFP+

Out-of-band management port Yes (mUSB/RJ45) Yes (mUSB/RJ-45) Yes (mUSB/RJ-45) Yes (mUSB/RJ-45)


4


OMNIACCESS 4X50 WLAN CONTROLLER

OAW-4450 OAW-4550 OAW-4650 OAW-4750

Power-over-Ethernet ports No No No No

Power-over-Ethernet No No No No

Redundant power No Yes Yes Yes

Maximum power consumption 75.2 Watts 110 watts 125 watts 165 watts

USB ports 1 No No No

Legacy 802.11 standards support 802.11 a/b/g/n

Encryption types WEP, TKIP, DES, AES-CCMP, 3DES, AES-CBC, xSec

Authentication types WPA-Enterprise, WPA-PSK, WPA2-Enterprise, WPA2-PSK, 802.1X, MAC address, captive portal

Management capabilities SNMP, web, CLI using SSH, telnet and console port




5


OMNIACCESS 4504XM, 4604 AND 4704 WLAN

OAW 4504XM OAW 4604 OAW 4704

Maximum campus AP licenses 32 64 128

Maximum Remote AP licenses 128 256 512

Maximum concurrent users/devices 2,048 4,096 8,192

Maximum VLANs 128 256 512

Active firewall sessions 128,000 128,000 128,000

Concurrent GRE tunnels (system BSSIDs) 2,048 4,096 8,192

Concurrent IPsec sessions 2,048 4,096 4,096

Concurrent SSL fallback sessions 512 1,024 2,048

Mobility Access Switch Tunneled Node ports 256 512 1,024

Firewall throughput 3 Gbps 4 Gbps 4 Gbps

Encrypted throughput (3DES, AES-CBC) 1.6 Gbps 4 Gbps 8 Gbps

Encrypted throughput (AES-CCM) 800 Mbps 2 Gbps 4 Gbps

Form factor/footprint 1 RU 1 RU 1 RU

Auto-negotiating 10/100/1000BASE-T ports 4 4 4

Gigabit Ethernet ports (GBIC or SFP) 4 4 4

10 Gigabit Ethernet ports (XFP) NA NA NA

Out-of-band management port No No No



OMNIACCESS 4504XM, 4604 AND 4704 WLAN

OAW 4504XM OAW 4604 OAW 4704

Power-over-Ethernet ports No No No

Power-over-Ethernet No No No

Redundant power No No No

Maximum power consumption 35 watts 45 watts 60 watts

USB ports No No No

Legacy 802.11 standards support 802.11 a/b/g/n

Encryption types WEP, TKIP, DES, AES-CCMP, 3DES, AES-CBC, xSec

Authentication types WPA-Enterprise, WPA-PSK, WPA2-Enterprise, WPA2-PSK, 802.1X,

MAC address, captive portal Management capabilities SNMP, web, CLI using SSH, telnet and console port






Documents

PRODUCT LINE MATRIX: INSTANT ACCESS POINTS