NXT Hg5 Series of Amalgam Separators

TM

Key Points

New compact designFor hard-to-�t spaces1

Market leader in the industryISO 11143:2008 certi�ed2

Easy to operate• No tools necessary• No daily maintenance• No decanting

3

Easy collection container change outSimple to change either by dentalprofessional or technician

4

Extends life of vacuum systemWet Ring Pumps - By collecting solids and sediment, the NXT Hg5 saves on the purchase of pinnacle traps and reduces the wear caused by solids passing through the wet ring pumps

Dry Vacuums - Reduces sludge build up in the air-water separator tank of a dry vacuum system. Less time and money spent on maintenance and repair to the vacuum system

7

5• Install before pump on wet vacuum systems

• Install before tank on dry vacuum systems

Functional with both wet anddry vacuum systems

8No additional charge for recyclingEasy mail-back service

9Available online 24/7

Certi�cates of recycling

Better for the environmentRemoves approximately 4,400 lbs of mercury from waste streams every year while also saving approximately 130 billion gallons of water

Eco-friendly packaging, 100% recyclable

No contracts or hidden fees

Certificates of ComplianceAvailable on our website 24/7

Certification: ISO 11143:2008Easy mail-back recycling programShipping and recycling included in cost

Extends the life of the vacuum systemPrevents particulates from passing though the wet vacuum pump, protecting the pump from unnecessary wear and tear and potential repair costs

Product Knowledge Guide

Position for right or left orientation 6Flexible installation

Troubleshooting NXT Hg5 Systems

TM

Solids reachfull line of collection container

Problem

Top chamber has some

solids

Problem

Top chamberis filled

with solids

ProblemTop chamber

has some solids; container

not full

ProblemSolids above

full line of collection container

Problem

Poor lighting in equipment

room

Problem

NXT Prod Guide 05.2018

Questions? Contact Customer Support at 1.800.216.5505 or at www.solmetex.com

Replace thecollection container

• Leave thevacuum runningduring thecollectioincontainerreplacementprocess

System isbacked up -could potentiallydamage vacuum

• Turn on vacuum• Remove pins• Tilt container

toward manifoldto allow air intotop chamber

• Place containerback on andinsert pins

• Change collectioncontainer if full

System isin bypass

• Reduction insuction

• Solids releasedinto waste streamand environment

• Top chamber mustbe replaced

• Full top chambermust be recycled

• New EPAregulationrequires repair orreplacementwithin 10 days ofmalfunction

Clogs intop chamber

• Check what typeof line cleaner isbeing used. ThepH must bebetween 6 & 8

• Turn on vacuum• Remove pins• Tilt container

toward manifoldto allow air intotop chamber

• Place containerback on andinsert pins

Replace thecollection container

• Inspect the topchamber forsolids

• Leave thevacuum runningduring thecollectioincontainerreplacementprocess

Use flashlight to check collection container

• Using aflashlight fromthe backside ofthe system,shine lightforward to helpdeterminethe level ofsedimentation

• Use sameprocedure toinspect topchamber

Solution Solution Solution SolutionSolution Solution