Upload
vantruc
View
222
Download
0
Embed Size (px)
Citation preview
ML Series
Desiccant Dehumidifier
Product Description
The ML1350 desiccant dehumidifier is designed to efficientlydehumidify in low moisture applications. It is equipped with aninternally sealed rotor unit. The rotor casing is constructed ofdurable thermoset plastic and contains isolated sections thatprovide a precise balance for dehumidification, reactivation, andheat recovery airflows. Its rugged formed metal frame and accesspanels are produced from corrosion resistant Aluzink®.The electrical control system conforms to EN 60204 (IEC204)standards. The electrical components are mounted on busbars andare constructed of halogen-free plastic. The electrical system isdesigned for up to 690V and 60º C. ML Series dehumidifiersconform to both harmonised European Standards and to CEmarking specifications.
Munters Rotor Technology
The desiccant rotor is manufactured from a corrugated compositematerial that is highly effective at attracting and holding watervapour. Every Munters dehumidifier applies a unique rotortechnology. Airflows, air conditions, rotor sections, and rotorrotation speeds are optimised for specific applications. Aninnovative control system maximises the units energy efficiency. A characteristic of the ML Series rotor technology is an extra rotorsector which provides high capacity, while simultaneouslyrecovering heat, thereby effectively reducing the electrical powerrequirement.
PRODUCT INFORMATION
ML1350
Features
- Advanced control panel -diagnostic fault display.
- Unique plastic rotor casing 100 %corrosion resistance.
- Dehumidifies efficient down to-20ºC.
- Dehumidifies to low dewpoint.
- Interchangeable front and backpanels - easier to install.
Model ML1350Diagram measurements are for referenceonly.
Scaled and dimensioned AutoCaddrawings are available in MuntersDryCap program.
MLMunters
420
A
B
C
∅D
∅E
Width (A) 715 mm
Depth (B) 590 mm
Height (C) 1510 mm
Diam. (D) 250 mm
Diam. (E) 160 mm
Weight 160 kg
Technical Specification
Process airRated airflow (m³/h) 1350Available static pressure (Pa) 300
Reactivation airRated airflow (m³/h) 490Available static pressure (Pa) 300
Total power,voltage and current (amps/phase)Total power(kW) 15,16380V 3-50Hz (A) 24,4380V 3-60Hz (A) 24,9400V 3-50Hz (A) 23,6415V 3-50Hz (A) 23,1440V 3-60Hz (A) 22,3460V 3-60Hz (A) 21,7480V 3-60Hz (A) 21,1500V 3-50Hz (A) 18,7
Miscellaneous dataOperating temperature (ºC) -20/+40Max noise level unducted (dBA) 83Air filter standard G3IEC protective class (unit) IP33IEC protective class (electrical panel) IP54
DehumidificationCapacity
Approximate capacity in kg/h atdifferent inlet process air relativehumidity, % RH.
Dehumidification capacity, kg/h
0
3
6
9
15
–10 0 10 20 30
1260% RH80% RH
40% RH
Process Air Temperature, °C
Options
• Hours run counter (monitors thenumber of hours the system isoperational)
• Blocked filter alarm• Rotor stopped alarm• Humidity control system with alarm
and displayRefer to the RH98 product datasheet
• Stainless steel sheet metal casing
DH/MEA/PGB-0024-10/10
Sub
ject
to c
hang
e w
ithou
t not
ice.
AUSTRALIATel +61 2 8843 1588
AUSTRIATel +43 1 6164298-0
BELGIUMTel +32 2 240 68 68
BRAZILTel +55 41 3317 5050
CANADATel +1 905 8585894
CHINATel +86 10 804 18000
DENMARKTel +45 4495 3355
FINLANDTel +358 9 8386 030
FRANCETel +33 1 3411 5757
GERMANYTel +49 40 73416-01
INDIATel +91 20 668 18 900
ITALYTel +39 0183 521377
JAPANTel +81 3 5970 0021
KOREATel +82 2 761 8701
MEXICOTel +1 52 722 270-4029
NETHERLANDSTel +31 172 43 32 31
POLANDTel +48 58 305 35 17
SINGAPORETel +65 6744 6828
SOUTH AFRICATel +27 11 997 2000
SPAINTel +34 91 640 09 02
SWEDENTel +46 8-626 6300
SWITZERLANDTel +41 52 3438886
THAILANDTel +66 2 642 2670-3
TURKEYTel +90 212 286 1838
UNIT. ARAB EMIRATESTel +971 4 881 3026
UNITED KINGDOMTel +44 8708 505 202
UNITED STATESTel +1 978 241 1100
VIETNAMTel +84 8 825 6838 www.munters.com