Product information · • proxy, swipe-card and biometric readers easily added • low-side mechanical key for additional locking TECHNICAL SPECIFICATIONS • DIMENSIONS: UNIWAY

Productinformation

HF Security have over 15 years experience in high security areas, especially physical security and high weight products.

We integrate, supply and install state-of-art security cabins and side products for them.

We provide rugged, reliable lineup of easy-to-use products priced to fit your budget. Our products increase safety and reduce liability in and around your high security areas.

Environments such as Airports, Harbours, Train Stations, Hospitals, Banks, Ministries, Prisons, Stadiums, Power Plants focusing its attention to meet their security needs.

All of this focusing on the design and development of customized solutions for access control and buildings protection.

www.securitycabin.eu Made in EU

HF24K series represent flexible solution for security entrances. Practical and stylish, they fit every background, specifically ministries, banks, industries and airports. They can be delivered in parts for on-site assembly; this feature allows them to meet an easy transportation and introduction in final places thanks to the space reduction.

Square models are available with a straight (180°) or left/right angled (90°) passage:• HF24K: base 1050mm and glass up to 29/31mm• HF24K Plus: base1150mm and glass up to 29/31mm• HF24K Maxi: base 1500mm and glass up to 26/27mm

CABINS | Security

HF24K series

EM24K

CABINS | Security

EM24K Plus

HF24K HF24K Plus


HF24K Maxi

HF24K Maxi

CABINS | Security CABINS | Security

FEATURES AND OPTIONS

• self-contained built-in metal detector• volumetric left object control system• volumetric single passage checking system• digital display, menu-guided command and setting console• intercom, voice messages and traffic-lights• easy-link to third party manufactured access control systems (RS232 - RS485 – IBIS interfaces)• hidden microcameras inside the cabin• proxy, swipe-card and biometric readers easily added• low-side mechanical key for additional locking

TECHNICAL SPECIFICATIONS

• DIMENSIONS: HF24K L 1050 x W 1050 x H 2222 mm HF24K Plus L 1150 x W 1150 x H 2222 mm HF24K Maxi L 1500 x W 1500 x H 2222 mm• FREE PASSAGE AREA: HF24K L 580 x H 2000 mm HF24K Plus L 700 x H 2000 mm HF24K Maxi L 900 x H 2000 mm• WEIGHT: from 700 kg up to 1050 kg according to the model and additional options• POWER SUPPLY: 230 V (110 V on request), 50/60 Hz• VOLTAGE: 12-24 V.d.c. with back-up batteries for uninterrupted operations in case of power loss (from 100 up to 1000 cycles)• CONSUMPTION: 85W on HF24K and K Plus; 100W on HF24K Maxi• THROUGHPUT: 3-5 full cycles/1’ one sense; 6-8 full cycles/1’ two senses according to the model and additional options• FRAME: • demountable, in painted steel frame • steel sides on applications • cabins floor: 20 mm thick (cabins do not need to be recessed)• PAINTING AND FINISHING: RAL colours code range standards with «orange skin» finishing (flat finishing, stainless steel execution and other colours on request)

• GLASS: sides and doors equipped with 26/27 mm laminated thick glass rated BR3/S P6B; 20/21mm laminated thick glass rated BR2/S P6B on HF24K Maxi (different glass thickness on request)• LIGHTING: inside lighting with 12 V, 50/60 Hz led spots• MOVEMENT: 24 V.d.c. electric-motors assisted sliding-doors movement with reversible option for manual opening in case of total power loss• ELECTRONICS: microprocessor based electronics• ACCIDENT PREVENTION MEASURES: self-adjusted braking, speed control and accident prevention devices• PROGRAMMABLE OPTIONS: emergency escape/ door locks; automatic/manual transit; passage one/both directions



TONDA series is the solution for a secure, quick and elegant access control. Automatic interlocked doors, round base, available both in painted steel and in stainless steel, they can be delivered in parts for on-site assembly.

A light structure gives a maximum, glazed surface area.Equipped with curved doors controlled by a powerful motorized system, it provides rigorous control while maintaining a high flow passage (from 3 up to 5 passages per minute in the same direction and from 6 up to 8 passages per minute in alternative directions, according to the model).

Available in separate parts for local assembly, can be easy installed also to the highest floors.

They are available with 180° passage in several models :• TONDA: Ø 1050mm and glass up to 26/27mm• TONDA Plus: Ø 1150mm and glass up to 26/27mm• TONDA Maxi: Ø 1485mm and glass up to 26/27mm

HF TONDA series

TONDA with metal detector TONDA Plus

TONDA TONDA Plus


TONDA Maxi



• built-in metal detector• volumetric left object control system• volumetric single passage checking system• digital display, menu-guided command and setting console• intercom, voice messages and traffic-lights• easy-link to third party manufactured access control systems (RS232 - RS485 – IBIS interfaces)• hidden microcameras inside the cabin• proxy, swipe-card and biometric readers easily added• low-side mechanical key for additional locking


• DIMENSIONS: TONDA Ø 1050 x H 2227 mm TONDA Plus Ø 1150 x H 2267 mm TONDA Maxi Ø 1485 x H 2304 mm• FREE PASSAGE AREA: TONDA L 580 x H 2005 mm TONDA Plus L 700 x H 2045 mm TONDA Maxi L 900 x H 2090 mm• WEIGHT: from 450 Kg up to 900 kg according to the model and additional options• POWER SUPPLY: 230 V (110 V on request), 50/60 Hz• VOLTAGE: 12-24 V.d.c. with back-up batteries for uninterrupted operations in case of power loss (up to 100 cycles)• CONSUMPTION: 75W on Tonda and Plus; 95W on Tonda Maxi• THROUGHPUT: 3-5 full cycles/1’ one sense; 6-8 full cycles/1’ two senses according to the model and additional options• FRAME: • available also in separate parts for local assembling • cabins floor: 12 mm (standard for TONDA Maxi, on request for other models which have 20mm thick floor as standard)• PAINTING AND FINISHING: RAL colours code range standards with «orange skin» finishing (flat finishing, stainless steel execution and other colours on request)

• GLASS: • sliding doors with 11/12mm laminated thick glass rated P3A (different glass thickness on request) • sides with 20/21mm laminated thick glass rated BR2/S P6B (different glass thickness on request)• MOVEMENT: 24 V.d.c. electric-motors assisted sliding-doors movement with reversible option for manual opening in case of total power loss• LIGHTING inside lighting with 12 V, 50/60 Hz led spots• ELECTRONICS: microprocessor based electronics• ACCIDENT PREVENTION MEASURES: self-adjusted braking, speed control and accident prevention devices• PROGRAMMABLE OPTIONS: emergency escape/ door locks; automatic/manual transit; passage one/both directions



Uniway and Multiway series are the new cabins with single and double corridor using telescopic automatic doors interlocked to control people passage in entrance and in exit. They fit different background, specifically offices, ministries, banks, post offices and industries.

The new design, updated both from the aesthetical and the functional point of view, gave brightness and elegance to these cabins thanks to the surfaces almost entirely of glass, keeping an high level of security.They can be fitted in with self-contained metal detector and bullet proof glass.

Thanks to the telescopic leaves overlapping in the middle, Multiway and Uniway allow to optimize space and they can be programmed in different ways based on the needs.Multiway corridors are managed by two independent control consoles.

These models can be installed directly on the building floor without need of recess. Throughputs are 180° and corridors sizes are different according to the model:• UNIWAY: single corridor cabin with base L 1580 x W 1500 mm (available W 1300, 1400, 1600mm)• MULTIWAY 80-80: double corridor cabin with base L 2230 x W 1500 mm (available W 1300, 1400, 1600mm)• MULTIWAY 70-90: double corridor cabin with base L 2280 x W 1500 mm (available W 1300, 1400, 1600mm)

UNIWAY and MULTIWAY series

MULTIWAY 80/80

MULTIWAY 80-80 IN A BANK APPLICATION WITH DOUBLE ADDITIONAL SIDE DOORS:

UNIWAY

staff entrance during off hours

Vault room entrance «Area Safe» with security armoured ASDoor

Both Uniway and Multiway series can be fitted with additional side doors for staff or policeman alternative gates.


MULTIWAY 80-80



• self-contained metal detector• side door integrated in one or both corridors• volumetric left object control system in one or two corridors• volumetric single passage checking system in one or two corridors• double contact mat for single passage checking system in one or two corridors• weight cells for single passage checking system in one or two corridors• two digital display, menu-guided command and setting consoles• intercom, voice messages and traffic-lights• easy-link to third party manufactured access control systems (RS232 - RS485 – IBIS interfaces)• hidden microcameras inside the cabin• proxy, swipe-card and biometric readers easily added• low-side mechanical key for additional locking


• DIMENSIONS: UNIWAY L 1580 x W 1500 x H 2372 mm (available W 1300, 1400, 1600mm) MULTIWAY 80-80 L 2230 x W 1500 x H 2372 mm (available W 1300, 1400, 1600mm) MULTIWAY 70-90 L 2280 x W 1500 x H 2372 mm (available W 1300, 1400, 1600mm)• FREE PASSAGE AREA: UNIWAY L 900 x H 2100 mm MULTIWAY 80-80 L 800 x H 2100 mm for each corridor MULTIWAY 70-90 L 700 x H 2100 mm e L 900 x 2100 mm• WEIGHT: from 1100 up to 1500 Kg according to the model and additional options• POWER SUPPLY: 230 V (110 V on request), 50/60 Hz• VOLTAGE: 12-24 V.d.c. with back-up batteries for uninterrupted operations in case of power loss (from 100 up to 1000 cycles) for each corridor• CONSUMPTION: 150W on Uniway and 290W on Multiway series• THROUGHPUT: • MULTIWAY 80-80 and MULTIWAY 70-90: 11-12 full cycles/1’ one sense; 23-24 full cycles/1’ two senses according to the model and additional options

• UNIWAY: 5-6 full cycles/1’ one sense; 12-13 full cycles/1’ two senses according to the model and additional options• FRAME: • Available only disassembled, in painted steel frame • cabins floor: 20 mm thick (cabins do not need to be recessed)• PAINTING AND FINISHING: RAL colours code range standards with «orange skin» finishing (flat finishing, stainless steel execution and other colours on request)• GLASS: sides and doors equipped with 20/21mm laminated thick glass rated BR2/S P6B• LIGHTING: inside lighting with 12 V, 50/60 Hz led spots• MOVEMENT: 24 V.d.c. electric-motors assisted sliding-doors movement with reversible option for manual opening in case of total power loss• ELECTRONICS: microprocessor based electronics• ACCIDENT PREVENTION MEASURES: self- adjusted braking, speed control and accident prevention devices• PROGRAMMABLE OPTIONS: emergency escape/ door locks; automatic/manual transit; passage one/both directions

MULTIWAY 70-90


Security trays, hatches, complete elements


Use

Model 20 sliding tray unit comprises a tray and carriage that move in opposite directions and comes ready for installation. Ideally it should be used as an indoor counter unit.The unit is suitable for handing over files, documents, rolls of money and similar objects.

Safety and features

• Slide-action flat tray for handing over flat items such as files, documents, passports and rolls of coins up to 30 mm high.

• Reverse-action deep tray for handing over larger objects up to 100 mm high, such as files with 80mm spines.

• Automatic lock at full extension in either direction. Lock can only be released by the operator behind the counter by using the lever.

• It is not possible to reach through the hole or manipulate the mechanism while the deep tray and carriage are sliding.

• Offers firearms protection, capable of withstanding heavy handgun fire eg, up to 44 Magnum. Has received M3/FB4 certification from the firearms licensing authority.

• Model 20 fulfils German UVV regulations.

Materials and use

• Flat tray consists of a steel plate insert tray finished with polyurethane foam and a black-brown coating.

• Carriage and deep tray made out of 3mm brushed stainless steel with black-brown powder coated cover.

• Casing made out of 2mm brushed stainless steel.

• All metal parts have been produced using state-of-the-art precision laser cutting technology for ultimate quality.

• Model 20 is best suited to indoor use.• The entire unit requires no maintenance. No

need for cleaning or lubrication.

Model 20 Installation and dimensions

The sliding tray comes ready for mounting in prepared counter sections. The tray is mounted by insertion from above through the hole in the counter. With wooden counters the tray can be fitted flush with the counter. With stone counters it is placed on top. Consideration must be given to access requirements and the possible need to remove the unit later in the unlikely event of repairs.

Outer dimensions(all measurements in mm)Width 450Depth 600Height 174

Tray clearanceWidth 335Height 30

Carriage clearanceWidth 370Depth 305Height 100

Deposit openingWidth 370Depth 215

Mounting, counter sectionFlush with surface600 x 450 x 2590 x 438

Weight29,2kg

Miscellaneous

• The Model 20 flat variant comes with a cover in stainless steel instead of the flat tray and has been specially designed for use as a late or night shift counter.

• Available with stainless steel top surface on request.

• Other colours available on request.




Use

Model 20 flat sliding tray comprises a hatch with a tray that moves in opposite directions and comes ready for installation. Ideally it should be used as an indoor counter unit, especially on late or night shifts.The unit is suitable for handing over files, documents, rolls of money and similar objects.

Safety and features

• Sliding deep tray for handing over larger items up to 100 mm high, such as files with 80 mm spines.

• Automatic lock at full extension on either side. Lock can only be released by the operator behind the counter by using the lever.

• It is not possible to reach through the hole while the deep tray is sliding or manipulate the mechanism.

• Offers firearms protection, capable of withstanding heavy handgun fire eg, up to 44 Magnum. Has received FB4 certification from the firearms licensing authority.


Materials and use

• The cover is made out of a 1 mm thick stainless steel plate.

• Carriage and deep tray made out of a 3 mm steel plate with black-brown powder coated cover.

• Casing made out of 2mm brushed stainless steel.


• Model 20 flat is best suited to internal use, especially for late or night shifts.

• The hatch unit requires no maintenance. No need for cleaning or lubrication.

Model 20 Flat Installation and dimensions

The sliding tray comes ready for mounting in prepared counter sections. The tray is mounted by inserting it into the recess in the counter from above. With wooden counters the tray can be fitted flush with the counter. With stone counters it is placed on top. Consideration must be given to access requirements and the possible need to remove the unit later in the unlikely event of repairs.



Deposit openingWidth 370Depth 215


Weight29,8kg

Miscellaneous

• The Model 20 variant comes with a flat tray for handing over flat items such as files, documents, passports and rolls of money up to 30 mm high. This replaces the cover and has been specially designed for daytime use .


• Other colours available on request• Fire protection up to F90 available

on request.




Use

Model 30 sliding tray comprises a flat tray that comes ready for installation. Ideally it should be used as an indoor counter unit. The unit is suitable for handing over files, documents, rolls of money and similar objects

Safety and features

• Sliding, flat, deep tray for handing over flat items such as files,

• Automatic lock at full extension on either side. Lock can only be released by the operator behind the counter by using the lever.

• It is not possible to reach through the hole while the flat tray is sliding or manipulate the mechanism.


Materials and use

• Flat tray consists of a steel plate insert tray finished with polyurethane foam and a black-brown coating

• The deep tray is made out of a 3 mm steel plate with black- brown powder coated cover

• Casing made out of 2 mm brushed stainless steel

• All metal parts have been produced using state-of-the-art precision laser cutting technology for ultimate quality

• Model 30 is best suited to indoor use• The unit requires no maintenance. No need for

cleaning or lubrication.


The sliding tray comes ready for mounting in prepared counter sections. The tray is mounted by inserting it into the recess in the counter from above. With wooden counters the tray can be fitted flush with the counter. With stone counters it is placed on top. Consideration must be given to access requirements and the possible need to remove the unit later in the unlikely event of repairs.

Outer dimensions(all measurements in mm)Width 450Depth 600Height 63Height for M3/FB4 variant: 71



Weight19kg

Miscellaneous

• On request: available in materials offering firearms protection, capable of withstanding heavy handgun fire eg, up to 44 Magnum. M3/FB4 certification from the firearms licensing authority available.


• Coatings also available in other colours on request.




Use

Model 53.01 is a sliding pass-through that comes ready for installation and comprises an integrated two-way intercom system. The unit is frequently used for physical access supervision in indoor areas and roofed outdoor areas such as car parks, gatehouses, government buildings and company gates. M3/FB4 firearm certification comes as standard. Fire protection to F90 available on request.

Safety and features

• Sliding pass-through for pedestrians, fits flush with outside façade; front panel and integrated intercom for automatic two-way conversation.

• Manual operation drawer.• Locks automatically in both end positions. Lock

can only be released by the operator behind the counter by using the lever.

• It is not possible to reach through the hole when the drawer is extended or manipulate the mechanism.

• For handing over passes, files etc up to DIN A4.• Dust and draught sealed.• Materials offer firearms protection, capable of

withstanding heavy handgun fire, e.g. up to 44 Magnum.

Has received M3/FB4 certification from the firearms licensing authority.

• Model 53.01 fulfils German UVV regulations.

Materials and use

• Steel plate pass-through.• Fascia and drawer made out of 1mm thick

brushed stainless steel, casing, cover and lid 2 mm thick.


• Model 53.01 is suitable for indoor and outdoor use in covered areas.

• The unit requires no maintenance. No need for cleaning or lubrication.

Model 53.01 Installation and dimensions

The unit comes ready for mounting in prepared walls/façade recesses. Coming from the outside, it is mounted by inserting into the recess before screwing tight underneath the unit on the inside. Consideration must be given to access requirements and the possible need to remove the unit later in the unlikely event of repairs.

Outer dimensions(all measurements in mm)Front panel 670 x 130 x 28

Pass-throughWidth 420Depth 400Height 63

DrawerWidth 320Depth 215Height 38Extension 220

Weight26kg

Miscellaneous

• Model 53 available without two-way intercom and, as desired, with or without front fascia.

• Available up to F90 fire protection.• Firearm certification FB6 available

on request (Model 63K).• Available with rain cover.• Special sizes available on request.• Coatings available in RAL colours on

request.




Use

Model 7020 is a complete window counter and transfer unit that comes ready for installation. It is ideal for indoor use as a sales or reception counter for places such as front-desk receptions, gatehouses or for handing over passes, receipts, firearms and similar items.

Safety and features

• Window unit including Model 20 slide-action reverse pass-through and integrated intercom for automatic two-way conversation.

• Sliding flat tray for handing over flat items such as passes, receipts, passports and other items up to 30 mm high.

• Counter-directional deep tray for handing over larger objects up to 100 mm high, such as firearms and files with 80 mm spines.

• Automatic lock at full extension in either direction. Lock can only be released by the operator behind the counter by using the lever.

• It is not possible to reach through the hole or manipulate the mechanism while the deep tray and carriage are sliding.

• Offers firearms protection, capable of withstanding heavy handgun fire. Has received FB4 certification from the firearms licensing authority.



The unit comes complete with power cables and is ready for exact mounting in prepared wall sections. It is inserted into the recess from the outside to fit flush with the wall. This is done by removing the inner casing before screwing the unit into place from the inside to prevent tampering. Consideration must be given to access requirements and the possible need to remove the unit later in the unlikely event of repairs.




Mounting, wall recess1110 x 1250

Weight250kg

Miscellaneous

• Requires 230V socket nearby.• Also available with Model 20 spät

sliding tray.• Also available with window shutters

and illumination.• Special sizes available on request.• Inner casing coatings available in

alternative RAL colours on request.





Width 1140 The unit comes complete with power cables and is ready for exact mounting in prepared wall sections. It is inserted into the recess from the outside to fit flush with the wall. This is done by removing the inner frame before screwing the unit into place from the inside to prevent tampering. Consideration must be given to access requirements and the possible need to remove the unit later in the unlikely event of repairs. There should be a 230 V socket near the counter on the inner side.

Outer dimensions(all measurements in mm)Width 1140Height 2015 Depth 650 Drawer clearanceWidth 335Height 30

Hatch/carriage clearanceWidth 370 / 400Depth 310 / 540Height 100 / 700

Mounting, wall recess1110 x 2000 (W x H)

Weight400 kg

Miscellaneous

• Combines with all other HF Security pass-throughs, such as Model 20 spät, the ideal counter unit for late or night shifts.

• Also available as model 7520 or 7620 with case hatch Model 105 or money trolley hatch Model 106.

• Electrical door propulsion available.• Other firearm categories available

on request.• Frame coatings available in

alternative RAL colours on request

Use

Model 7120 is a complete unit featuring pass-through Model 20 and case hatch Model 100. The entire unit comes ready for installation and is suited for indoor use. It is particularly well suited to handing over larger sums of money or items such as briefcases or valuables boxes, although it can also be used as a reception or front-desk counter for handing over passes, documents and receipts.

Safety and features

• Complete unit with flat tray and trough Model 20 moving in opposite directions. For handing over flat objects up to 30 mm high, such as passes, receipts and ID cards as well as larger objects up to 100 mm high. With integrated Public intercom for automatic two-way conversation.

• Case hatch Model 100 with sliding doors, either manual or electromechanical hatch operation and safety activation with additional mechanical door lock: only possible to have one door open at a time.

Mechanism can not be manipulated.• Offers firearm protection, capable of

withstanding heavy handgun fire. Models featuring pass-through Model 20 and case hatch Model 100 have received FB4 certification from the firearms licensing authority.


Materials and use

• Safety glass adhering to BR4 NS.• Carriage and through made out of 3 mm thick

sheet steel with a black-brown powder coating.• Counter element made out of brushed stainless

steel.• Case hatch made out of 3 mm steel, lined with

stainless steel.• All metal parts have been produced using state-

of-the-art precision laser cutting technology for ultimate quality.

• Model 7120 is suitable for use in indoor areas.• The unit requires no maintenance. No need for

cleaning or lubrication.





The unit comes complete with power cables and is ready for exact mounting in prepared wall sections. It is inserted into the recess from the outside to fit flush with the wall. This is done by removing the inner frame before screwing the unit into place from the inside to prevent tampering. Consideration must be given to access requirements and the possible need to remove the unit later in the unlikely event of repairs. There should be a 230 V socket near the counter on the inner side.

Outer dimensions(all measurements in mm)Width 790Height 2015 Depth 650 Drawer clearanceWidth 335Height 30

Hatch clearanceWidth 442Depth 555Height 535

Mounting, wall recess760 x 2000 (W x H)

Weight375 kg

Miscellaneous

• Combines with all other HF Security pass-throughs, such as Model 20 spät, the ideal counter unit for late or night shifts.

• Also available as Model 7620 with money trolley hatch Model 106.

• Available with fire protection up to F 90.

• Special sizes available on request.• Other firearm categories available

on request.• Frame coatings available in

alternative RAL colours on request.

Use

Model 7520 is a complete counter unit featuring pass-through Model 20 or Model 20 spät and case hatch Model 105. The entire unit comes ready for installation and is suited for indoor or outdoor use. It is particularly well suited to handing over larger sums of money or items such as briefcases or valuables boxes, although it can also be used as a reception or front-desk counter for handing over passes, documents and receipts.

Safety and features

• Complete unit with open flat tray and pass-trough Model 20, for handing over flat objects up to 30 mm high, such as passes, receipts and ID cards, and with deep tray for handing over larger objects or folders up to 100 mm high.

• Model 20 spät can also be used if the counter is in cold draughty areas (flat slider instead of tray).

• Integrated Public 3 intercom for automatic two-way conversation (with optional headset).

• Case hatch Model 105 with alternately opening sliding doors, operated electromechanically via contral panel. Safety activation ensures only one door can be opened at a time. Mechanism can not be manipulated.

• Offers firearm protection, capable of with-standing heavy handgun fire. Models featuring pass-through Model 20, Model 20 spät and case hatch Model 100 have received FB4 certification from the firearms licensing authority.


Materials and use

• Safety glass adhering to BR4 NS.• Carriage and through made out of 3 mm thick

stainless steel with a black-brown powder coating.

• Counter element made out of brushed stainless steel.

• Case hatch made out of 3 mm steel, lined with stainless steel.


• Model 7520 is suitable for use in indoor areas, and Model 7520 spät is also suitable for use in covered outdoor areas.

• The unit requires no maintenance. No need for cleaning or lubrication.


Turnstiles, swing gates Turnstiles, swing gates

Full Height Turnstile BA3 TECHNICAL SPETCIFICATSION

POWER SUPPLY VOLTAGE:24 VAC

MAXIMUM POWER CONSUMPTION:130 VA

MAXIMUM CURRENT CONSUMPTION:5 A

STEERING SIGNAL:(max 0.5 sec)

FEEDBACK SIGNAL:0 V

OPERATION TEMPERATURE:-25 to +50°C

STORAGE TEMPERATURE:-30 to +60°C

MAXIMUM HUMIDITY:10-80%

OPERATION ENVIRONMENT:inside buildingoutside building

IP PROTECTION RATE:IP 44

NET WEIGHT:330 kg

The turnstiles are designed for assisting pedestrian access control at guarded passage ways, inside buildings and on the outside (under roofing).

Devices are intended for cooperation with electronic systems of pedestrian traffic and personal access control. Controlling devices (i.e. reader, button, electronic control, infrared remote control) can be attached to the gate. Devices are intended for continuous operation and they may be used in a high density of pedestrian traffic zones.

The device’s mechanism is equipped with a bidirectional pedestrian traffic control mechanism, that is, controllers for each access direction separately can be connected to the device. The device is also equipped with a mechanism locking the arms movement in a direction opposite to the one chosen by the controller,as well as mechanical assistance to the arms movement. Information pictograms – identify status of the mechanism’s locking for each direction.

The device’s main application is to support pedestrian traffic control at airports (e.g. authorised personnel only passage ways, as well as directing passenger traffic), at railway stations (e.g. points of ticket control/access control and passenger traffic), points of access control in public utility buildings, points of ticket control and fees (e.g. to sports facilities, show facilities, exhibition halls, theatres, cinemas), access and time attendance control points in working places (e.g. dedicated areas at factories, offices).

MECHANISM• System of locks for both directions of pedestrian traffic.• Locking the backward motion.• Unlocking the locking system in case of voltage decay.• Mechanical support for positioning the arms.

ELECTRONIC UNIT• Steering input for the first direction (e.g. for connectiong a

card reader and control button).• Steering input for the second direction (e.g. for connecting

a card reader and control button).• 1 x feedback signal informing about the arms’ rotation

being done (Normal Closed or Normal Open).• 1 x input to calibrate the arms’ position.• 1 x input to program the processor.

CONTROLLING SOFTWARE• Function of operation for both directions of pedestrian

traffic.• Function of remembering external signals during a person

passage cycle.• Function of calibration the arms’ zero position.• Operation mode: standard mode.

OTHER FUNCTIONS• Simplified assembly to the foundation with glued anchor

bolts.• Cable ducts between the foundation and the electronic

unit.• Three arms rotor.



Sliding Gates GT1 TECHNICAL SPETCIFICATSION

POWER SUPPLY VOLTAGE:GT1-100-L/R: 230 V, 50/60 HzGT1-100-C: 230 V, 50/60 Hz

MAXIMUM POWER CONSUMPTION:GT1-100-L/R: 300 WGT1-100-C: 600 W

MINIMAL POWER CONSUMPTION:GT1-100-L/R: 120 WGT1-100-C: 240 W

START-UP CURRENT CONSUMPTION:GT1-100-L/R: 10 AGT1-100-C: 10 A

OPERATION TEMPERATURE:GT1-100-L/R: 0 to +50 °CGT1-100-C: 0 to +50 °C

STORAGE TEMPERATURE:GT1-100-L/R: -30 to +60 °CGT1-100-C: -30 to +60 °C

MAXIMUM HUMIDITY:GT1-100-L/R: 85 %GT1-100-C: 85 %

NET WEIGHT:GT1-100-L/R: 160 kgGT1-100-C: 200 kg

TIME OF WING OPEN/CLOSE OPERATION:GT1-100-L/R: 0.6 secGT1-100-C: 0.6 sec

MAIN MATERIALGT1-100-L/R: INOX AISI 304GT1-100-C: INOX AISI 304

WINGGT1-100-L/R: clear tempered class 12 mmGT1-100-C: clear tempered class 12 mm

Sliding Gates GT1 are also called Speedgates. They allow for seamless support for a large number of passes in a short period of time.

Sliding gates or speedgates are mostly use more secured areas, because glasses are moving fast and smootly and acting together with integrated access sensors.

Gates are designed for continuous operation and assisting pedestrian access control at high density of pedestrian traffic zones, inside building under direct control. Devices are intended for cooperation with electronic systems of pedestrian traffic and personal access control. Controlling devices (reader, button, electronic control, infrared remote control) can be attached to the gate.

The device’s main application is to support pedestrian traffic control at airports (e.g. authorised personnel only passage ways, as well as directing passenger traffic), at railway stations (e.g. points of ticket control/access control and passenger traffic), points of access control for securied facilities (e.g. government buildings, border crossings, law courts), points of access control in public utility buildings, points of ticket control and fees (to sports facilities, show facilities, exhibition halls, theatres, cinemas), access and time attendance control points in working places (e.g. dedicated areas at factories, offices).

MECHANISM• System of for making the passage passable in

case of vltage decay (parting of the device’s arms).

• Overload system for arms movement.• Mechanical system of the engine and gear

enables smooth, quiet and fast movement of the arms.

ELECTRONIC UNIT• Processor software connector – USB port.• Control input (0 V signal) for each direction of the individual

passageway separately (e.g. card reader, control panel, coin mechanism, remote control, fire system).

• Return signal output informing on the person’s passage based authorisation signal.

• Higher priority inputs for deactivating the passager section (e.g. from building management system).

• The highest priority input for making passable/open the passageway section (e.g. from fire system).

• Sound and visual signals.• Function fo memorising the control signals during

individual passageway cycle.

DEVICE’S CONTRUCTION• Simplified assembly to the foundation with glued anchor

bolts (bolts are not included).



Speed Gates SG2TECHNICAL SPETCIFICATSION

POWER SUPPLY VOLTAGE:SG-2-L/R: 24 V DCSG-2-C: 24 V DC

MAXIMUM POWER CONSUMPTION:SG-2-L/R: 90 WSG-2-C: 180 W

MINIMUM POWER CONSUMPTION:SG-2-L/R: 30 WSG-2-C: 60 W

CURRENT CONSUMPTION AT START UP:SG-2-L/R: 4 ASG-2-C: 8 A

OPERATION TEMPERATURE:SG-2-L/R: 0 to +50 °CSG-2-C: 0 to +50 °C

STORAGE TEMPERATURE:SG-2-L/R: -30 to +60 °CSG-2-C: -30 to +60 °C

MAXIMUM OPERATION HUMIDITY:SG-2-L/R: 85 %SG-2-C: 85 %

IP PROTECTION RATE:SG-2-L/R: IP 40SG-2-C: IP 40

WING OPENING/CLOSING TIME:SG-2-L/R: 1 secSG-2-C: 1 sec

MAIN HOUSING MATERIALSG-2-L/R: INOX AISI 304SG-2-C: INOX AISI 304

DEVICE WINGSG-2-L/R: hardened class 8 mmSG-2-C: hardened class 8 mm

Speed Gates series SG2 are swinging type of turnstiles. Swinging speed technology combines slim design of the cabinet with a high speed drive unit. Designers here focused on fitting swing speed gates to any location whilst keeping the ability to implement a wide range of optional accessories without limitation. Facilitates access control in secure areas indoors.

Typical usage: passenger traffic ticket and access control points, airports/seaports, authorized personnel entry points, passenger flow direction, access control points in secure buildings (e.g. federal facilities, including border crossings, departments, other agencies and branches, ticket control and fee collection points at museums, theaters, exhibitions, fairs, arenas, pay tiolets, ticket control points in sport facilities, e.g. wimming pools, stadiums, other multi-purpose arenas, access control and TNT systems in the workplace, e.g. offices, special areas in factories.

MECHANISM• System of slowing the arm movement in treshold positions.• A precise and fast drive system of the wings movement.• System of clearing the passage in case of voltage decay

(unlocking the device wings).• System for positioning the arms (movement

synchronisation).

THE DEVICE CONSTRUCTION• A simplified assembly to a foundation with the use of glued

anchor bolts (anchors are not included).• The device construction is made of AISI 304 stainless steel

and black steel powder painted.

ELECTRONIC SYSTEM• Steering input (0 V signal) for each traffic direction

individually (e.g. a card reader, a control panel, a coin dispenser, a remote control, a firefighting system).

• Feedback signal output (0 V signal) informing about a passage of a person based on an authorising signal.

• A higher priority input for excluding the section from operation (e.g. from the building management system).

• The highest priority input for clearing/opening the passage section (e.g. from firefighting system).

• Functions: possibility to set the device operation modes (free passage or passage with authorisation for each traffic direction separately), remembering steering signals during the working cycle, sound signalling, diode signalling, adjustable speed of the wings movement, automatic calibration and setting from the level of the control panel inside the device.



Swing Gate GR1 TECHNICAL SPETCIFICATSION

POWER SUPPLY VOLTAGE:24 VAC

MAXIMUM POWER CONSUMPTION:60 VA

MAXIMUM CURRENT CONSUMPTION:2.5 A

STEERING SIGNAL:max. 0.5 sec

FEEDBACK SIGNAL:0 V

OPERATION TEMPERATURE:-25 to +50 °C

STORAGE TEMPERATURE:-30 to +60 °C

MAXIMUM HUMIDITY:10-80 %

OPERATION ENVIRONMENT:inside building


NET WEIGHT:35 kg

Swing gates GR1 series are usually used as a addition other gates for making space when need to deliver bigger goods through turnstiles. The uncomplicated design and reliability make this series of turnstiles do the job perfectly.

Gates are designed for assisting pedestrian access control at guarded passage ways, inside buildings, without strict control of pedestrian traffic. Devices are intended for cooperation with electronic systems of pedestrian traffic and personal access control, as a device supporting turnstiles (technical gate or gate for disabled person) Controlling devices (card reader, button, electronic controler, infrared remote controler) can be attached to the gate. Devices are intended for continuous operation and they may be used in a high density of pedestrian traffic zones.

The device’s main application is to support pedestrian traffic control at: airports (authorised personnel only passage ways, as well as directing passenger traffic), at railway stations (points of ticket control/access control and passenger traffic), points of access control in public utility buildings, points of ticket control and fees (show facilities, exhibitions, theatres, cinemas), access and time attendance control points in working places (dedicated areas at factories, offices).

Gates are equipped with a mechanism controlled by an electronic processor chip. The processor chip, having received a signal from an external device (e.g. card reader, switch/button – 0V signal [max – 0.5 sec.]) and verified the arms’ position, takes control over locking and unlocking the arms’ movement. The arms’ position measurement system enables smooth operation and efficient functioning of the device. The device’s chip sends a feedback informing about the arms’ rotation per single crossing.

MECHANISM• Electromecganical arms movement support.• Clutch.• Electromechanical brake.• Biderectional movement.• Measurement system to verify the position of the arm.

ELECTRONIC UNIT• Steering input for the first direction (e.g. for connecting a

card reader and control button).• Steering input for the second direction (e.g. for connecting

a card reader and control button).• Input to calibrate the arms’ position and program processor.• Processors’ programming interface.• Sound alarm.

CONTROLLING SOFTWARE• Function of operation for both directions of pedestrian

traffic.• Function of remembering external signals during a person

passage cycle.• Function of calibration the arms’ zero position.

OTHER FUNCTIONS• Simplified assembly to the foundation with glued anchor

bolts.



Turnstile Tripod BR2TMTECHNICAL SPETCIFICATSION

POWER SUPPLY VOLTAGE:24 V AC

MAXIMUM POWER CONSUMPTION:120 W

MINIMUM POWER CONSUMPTION:5 A

STEERING SIGNAL:max. 0.5 sec

FEEDBACK SIGNAL:0 V

OPERATION TEMPERATURE:-20 to +50 °C

STORAGE TEMPERATURE:-30 to +60 °C

MAXIMUM HUMIDITY:10-80 %

OPERATION ENVIRONMENT:inside buildingoutside building


NET WEIGHT:70 kg

This turnstile is designed to assist pedestrian access control at guarded passage ways inside buildings. Examples of use: points of ticket control and access control for passenger traffic, airports/seaports, passages for authorised personnel, directing passanger traffic, points of access control in secured buildings (state offices such as border crossing points, ministries), points of ticket control and fees at museums, theatres, cinemas, exhibitions, fair areas, show facilities, paid toilets, points of ticket control at sports facilities, e.g. swimming pools, stadiums, other sports and show facilities, access and time attendance control points in working places, e.g. offices, dedicated areas in factories.

MECHANISM• Mechanism is designed for continous operation.• Mechanism allows 1200 cycles / hour.• Mechanism is equipped with double blockade system.• Mechanism is equipped with additional mechanical

unlocking of blockade systems.

ELECTRONIC SYSTEM• Steering input (0 V signal) for each traffic direction

individually.• Feedback signal output (0 V signal) informing about a

passage of a person based on an authorising signal.• A higher priority input for excluding the section of

operation (e.g. from the building management system).• The highest priority input for clearing/opening the passage

section (e.g. from the firefighting system).• Functions: remembering steering signals during the

working cycle, sound signalling, diode signalling, automatic calibration.


Strongrooms, strongroom doors


Prefabricated Strongrooms (PSR) are constructed from wall-, roof- and floor panels welded together. The panels are produced with modern production technique and constructed with a new barrier material.

The design of the PSR can easily be adopted to the conditions at site. HF Security’s PSR is assembled in a short time and can easily be dismantled and used again.

BURGLARY PROTECTION• All types of PSR are certified in accordance with

the European standard EN-1143-1.

EXPLOSIVE TEST – EX – OPTION• HF Security’s PSR in Grade VIII and X have also

passed the explosive test and are certified as EX PSR.

CORE DRILL TEST – CD – OPTION• HF Security’s PSR in Grade VIII and X have also

passed the core drill test and are certified as CD PSR.

VENTILATION• The PSR can be fitted with a reinforced

ventilation passage that has been accepted by the certification institute and which will be connected to a tube ø150 mm.

ALARM AND POWER SUPPLY• There are 8 conduits (ø18) for power supply to

lighting, alarm and safe deposit lockers.

FINISH• Strongroom Door – primed finish• Panels – outside, untreated finish• Panels – inside, painted with primer

Prefabricated StrongroomGrade – V Grade VI Grade VIII-EX-CD Grade – X-EX-CD

Standard EN-1143-1 EN1143-1 EN-1143-1 EN1143-1

Certified by SBSC SBSC SBSC SBSC

Panels – Grade V VI VIII-EX-CD X-EX-CD

Strongroom door – Grade V VI VIII-EX-CD X-EX-CD

Explosive test – EX – – Yes Yes

Core drill test – CD – – Yes Yes

Panels – thickness mm 80 80 100 150

Panels – weight kilos/m² 250 250 310 480

Maximum internal span without beams and

pillars in mm3500 3500 4000 4000

Minimum internal width 1220 1220 1220 1220

Minimum internal height 2050 2050 2050 2050

Reinforced ventilation passage – Option Yes Yes Yes Yes

Passing for power supply to lighting and alarm –

qty and dim.8 st – ø18 mm 8 st – ø18 mm 8 st – ø18 mm 8 st – ø18 mm

Finish – door Primed finish Primed finish Primed finish Primed finish

Finish – panels outside Untreated finish Untreated finish Untreated finish Untreated finish

Finish – panels inside Primed finish Primed finish Primed finish Primed finish

Standard locking Changeable key locks

Changeable key locks



Number of locks 2 2 2 2

Optional locking available on Yes Yes Yes Yes

* Dimensions in mms and kilos

TECHNICAL SPETCIFICATSION




The body is a rigid welded unit built of cold rolled steel.

The locker doors are made of specially ground aluminium. Each door has a number-plate with the number of the locker.

Lock and bolt work are built into the door. Therefore this is even on the inside.

Hinges are concealed. The lockers come in vertical columns which are secured to each other in the vault.

Bases are recessed and have means for easy adjustment of height for levelling.

BURGLARY PROTECTION• HF Security’s Safe Deposit Lockers type

BF4 are tested and certified by SSF, Svenska Stöldskyddsföreningen in accordance with SSF 1048-2 Bankfack-Krav och Provning.

LOCKING SYSTEMS• These systems vary with regard to the method

the bank intends to use for controlling access to the lockers.

• The systems may be mechanical or electrical and are described in separate leaflets.

• One thing however, is common. Only the customer with his personal key can operate the lock which withdraws the bolt and gives access to the locker.

FINISH• Locker doors in silver anodized aluminium.• Body in grey stove enamel.

INNER CONTAINERS• Each locker has an inner container.• For measurements please see dimensions tab.

Safe Deposit Lockers Type BF4 TECHNICAL SPETCIFICATSION




The Strongroom door is constructed with a new barrier material.

BURGLARY PROTECTION• All types of PSR are certified in accordance with

the European standard EN-1143-1.

BURGLARY PROTECTION• The Strongroom doors in Grade VII, VIII, X and

XI are tested in accordance with the European standard EN-1143-1.

• The Strongroom doors in Grade VIII, X and XI have also passed the explosive and core drill tests and are certified as EX-CD doors.

LOCKING• As standard the Strongroom door in Grade VII,

VIII and X is provided with 2 and in Grade XI with 3 changeable key-locks.

AVAILABLE AS OPTION:• Combination lock or Electronic PIN code lock.• Locks class C as per EN 1300

ELECTRICITY AND ALARM SYSTEM• As standard the Strongroom door is provided

with a switch for automatic power on to the Strongroom. The Strongroom door is provided with alarm cabling between door and frame through one of the hinges and two magnetic switches to indicate open door as standard.

FRAME• The frame is designed for wall thickness: • Grade VII & VIII: 350 mm • Grade X: 500 mm • Grade XI: 650 mm• As option the frame can be produced as a grip

frame.

COLOUR• Primer paint

Strongroom Door Type RVD

* Dimensions in mms and kilos

RVD Class Clear Height Clear Width Weight including frame

VII 2000 900 1800

VIII EX CD 2000 900 1800

X EX CD 2000 900 2100

XI EX CD 2000 900 3000

Door – right hungGate – left hung

TECHNICAL SPETCIFICATSION

INSTALLATION EXAMPLES

Door – right hungGate – right hung

Door – left hungGate – right hung

Door – left hungGate – left hung


HF Security was named as Gazelle Company in 2017!

The award is given to Estonian companies which have grown their turnover and profit more than 50% over the past three years and which are creating the most new positions on the job market. Moreover, a Gazelle Company is internationally described as a flexible, fast and bold company. Only 1% of all Estonian companies receive this award.

HF Security official distributor in your country:

HF Security | Holdfast LLC | Helgi tee 2 | 75312 ESTONIA | Tel: +372 5342 6762

Documents

Product information · • proxy, swipe-card and biometric readers easily added • low-side mechanical key for additional locking TECHNICAL SPECIFICATIONS • DIMENSIONS: UNIWAY