Product Guide - TrafFix Devices...Tra fFix 100% recycled rubber base is the “sandless” way to balllast channelizer drums. Therubber base “grips the road”and minimizes drum

Productt Guide

Table of Contents

TrafFix Channelizing ProductsChannelizing Drums 2 - 6Drum Bases 3, 6TrafFix Cone 7Grabber-Cones 8 - 9Grabber-Tubes 10Looper-Cones 11Looper-Tubes 12

TrafFix Barricade ProductsBarricade Rails 14A-Cades 15Type III Barricades 16Phoenix Type III 17Metro-A-Cade 17Premier Panel 18Grabber Vertical Panel Barricades 19Folding Barricades 20 - 22Vertical Panel Barricade 23TrafFix 42” Cone 24

TrafFix Sign & Stand, Vest and Miscellaneous ProductsRoll-Up Construction Signs and Overlays 26 - 28Custom Roll-Up Signs 29Roll-Up Sign Accessories 30 - 31Safe Sign-350 Blanks 32Zephyr Portable Sign Stand 33TrafFix Stand 34 - 35Phoenix Sign Stand 36 - 37Tri-Buster Sign Stand 38Econo Buster Sign Stand 39Little Buster Sign Stand 40 - 41Big Buster Sign Stand 42Super Buster Sign Stand 43Barrier Buster Concrete Barrier Clamp 44Sign Stand Accessories 45Sign Stand Buyer Guide 46Stop/Slow Paddles and Flags 47Safety Vests 48 - 51Spring Cones 52Barricade and Warning Lights 53Reflective Sheeting and Tapes 54

TrafFix Attenuator ProductsBig Sandy Sand Barrels 56Scorpion Truck Mounted Attenuator 57 - 59Scorpion Trailer Attenuator 60 - 61Compressor Attenuator 62 - 63Water-Wall 64 - 65

Traffix Devices Inc. • 160 Avenida La Pata, San Clemente, CA 92673 • (949) 361-5663

TrafFix Channelizing Products

• Plastic Channelizer Drums • Grabber-Cones • Grabber-TubesLooper-Cones • Looper-Tubes

2

TrafFix Chff annelizer DrumAvaivv lable in rugged, durable high densityii polyetyy hylene,tt

or impacmm t resistant, reshapaa eabla e low densityii polyetyy hylene.tt

Two mounting holes foroptional barricade lights

NTPEP tested–meets orationsexceeds MUTCD specifica

“D” shaped designfterminimizes rolling aionimpact and separat

from base

orRetaining lip or flange fompactadded strength during im

dBright orange color moldedbitorsthroughout drum – UV inhib

minimize fading

Gentle ccurves throughout drumeliminaate sharp edges orcorners that crack and breakwhen immpacted

Drum and base remain“snappeed together” untilimpacteed or separated fortransportation and storage

Taperedd design allows stackingwith or without barricade lightsfor easyy handling and storage

Drum iss a minimum of 18'' widethroughhout its 36'' height,regardleess of orientation Built-in carrying and

dragging handle

100% recycled rubber base for increased durability and “road friction”which resists movement from passing vehicles

NCHRP 350 TESTED

by FHWA by FHWA Acceptance Letter Acceptance Letter

WZ – 24WZ – 24

CERTIFIEDCERTIFIED

CRASH WORTHY18000 Series

3

TrafFix Chff annelizer Drum BasesTired of drum tops and bases that don’t fit, snap, or stay together?

We have the solution.TrafFix Devices offers the largest selection of channelizer drum bases in the industry.rr Choosefrom an array of different types and styles that best fit your needs and budget. And remember, whichever base you

select, it will fit any TrafFix channelizer drum top, even the ones you may have purchased years ago.

Standard Base (requires sand bag)

San-Fil base

Recycled rubber baseRecycled rubber base

All TrafFix Bases are IntercAll T fFi B hangeable with All TrafFix Drum Tops

25 standard bases nest for shipmentand storage

an-Fil bases are designed to hold approximately 50Saounds of sand. The twist lock cover keeps the sand insidepohe base. Two carrying handles make movement andthlacement an easy job. The low profile 4'' high base easilypllears vehicle undercarriages and can even support thecl

weight of any vehicle.we

fFix 100% recycled rubber base is the “sandless” way toTraflast channelizer drums. The rubber base “grips theballd” and minimizes drum movement due to wind gusts.roadbber bases come in 40 and 25 pound weights with twoRubvenient carrying methods.conv

Automobile running overa San-Fil base

Worker using center carryinghole with 40-lb. base

onomical and easy to use - simply place the base on thheEcoound, add a sand bag and snap - lock the drum top to thhegrose. Made of durable, impact resistant polyethylene.bas

4

Now Avaivv lable fra omTrafFix DevicesffDrumTopsoo withTire Rings

Introducinng TrafFix Devices Tire RingBase made fromm truck tire sidewall sections.It’s economicall and easy to use and providesall the ballast yyou’ll need to hold a drum inplace, even in tthe windiest conditions. The tirering eliminatess the need for sandbags that tearor break leaving messy sand on the roadway.The rubber tire ring “grips the road” andminimizes drumm movement and rotation.

Each TrafFFix Devices’ patented drum hasa unique retainning lip that acts as a flange tohold a tire ringg securely in place.

TrafFix chhannelizer drums (with tirerings) have beeen impact tested under thedirection of NTTPEP, the national testing orga-nization. The TTrafFix drum top successfullyseparated from the base when repeatedlyimpacted by thee test vehicle in both warmand cold weathher tests.*

Remembeer, by using truck tire sidewallsfor channelizerr drum ballast, we are reusingtruck tires and helping to keep them out oflandfills.

*Test and evaluuation results are availablefrom AASHTO’ss (American Association ofState Highway aand Transportation Officials)national transpportation product evaluationprogram (NTPEEP) director. Products were fieldtested and evaluuated by NTPEP as describedin the work plaan for temporary traffic controldevices. NTPEPP is supported by the52 AASHTO meember departments.

Note: All chaannelizer drum topsillustrated throuughout this brochurecan be ballastedd with tirerings. Tire size should be 22.5''(nominal diammeter).

Simply drop one or two 22.5'' diameter tire rings overany TrafFix Drum Top and you’re ready to begin yourconstruction project.

NCHRP 350 TESTED


WZ – 24WZ – 24

CERTIFIEDCERTIFIED

CRASH WORTHY

5

Why Buy from T.D.I.?DD

Is your job-site or storage yard filled with torn, broken, faded or otherwise unusable drums?

Did you know that over50% of the costofoo a drumtoptt is in thehigh performance reflective stripeii s?

Since 1987, TrafFix Devices, Inc. has

been providing their customers with the

most value for their channelizer drum

dollars. The drum tops and bases we made

in 1987 are still interchangeable with ones

we are currently producing.

At TrafFix Devices, we use only the

highest grade plastic resins to manufacture

our drums. Our drum tops and bases

are designed to“break-away” rather

than break upon impact.

RESHAPEABLERUGGED

ANDDURABLE

This previously crushed drumThis previously crushed drumhas been snap locked to itshas been snap-locked to itsbase and is ready to be putback on the job. Remember,every channelizer drum thatyou can salvage and reusesaves you money and keeps itout of landfills.

Here is a TrafFix Devices drum topHere is a TrafFix Devices drum topthat has been impacted and appearscrushed and unusable. Notice thatit is not torn or broken but simply“flattened out.” With most othermanufacturers’ products, this topwould be added to the “drum grave-yard” pictured above.

TrafFix Devices uses only top qualityplastic resins and has engineeredl d h dtheir drums to be reshaped after mostimpacts. By applying simple hand pres-sure to the dented areas, most drumscan be reshaped into their originalform and reused.

6

TrafFix Chff annelizer Drum Tops andoo Bases

TrafFix drum tops and bases are manufactured to ssnap-lockaround the entire perimeter of the drum. TrafFix unnique “lipdesign” of each drum top and base insures positive locking.

fFix channelizer drum tops and bases are designed to stayTrafked together when dragged or moved around constructionlocks. The top piece easily separates when impacted by a vehicle orsites

n be easily taken apart for storage.can

25 lb. base made of 100% recycled rubber. Ideal for cityor lower speed applications.

placement kit for worn edge of drum. Comes complete withepRastic section and hardware.lapl

TrafFix Cff onePVC Traffic Cone MUTDC Compliant

NEW

7 lb 28” Traffic Cone15028-NSWB7 28” Wide Body, 7 lb

PVC Traffic Cone, Orange,No Reflective

15028-RHWB7 28” Wide Body, 7 lbPVC Traffic Cone, Orange,6” & 4” Reflective

10 lb 28” Traffic Cone15028-NSWB10 28” Wide Body, 10 lb

PVC Traffic Cone, Orange,No Reflective

15028-RHWB10 28” Wide Body, 10 lbPVC Traffic Cone, Orange,6” & 4” Reflective

7

• Injection molded PVC, MUTCD Compliant, 28”wide body traffic cone.

• Rubber base for excellent stability and anti-skidperformance

• 7 lb. or 10 lb.• 6” and 4” refelctive collar for MUTCD compliant

nighttime performance.• Flourescent orange color throughout for superior

fade resistance.• Ridges on the inner cone allow for easy stacking

and deployment.• Reflective collars are recessed, providing abrasion

resistance and easy stacking.• PVC and rubber formulation provides excellent

all-weather performance.

handlesseasy grip h

TrafFix Grabber-ConesffGrabber-Cones come in 28''and 42'' heights and are ballasted

by 10, 16 or 30 lb. bases. Simply drop the recycled rubber base overthe cone stem and you’re ready to go to work.e stem and you’re ready to go to w

ckableStacWith its reinforced handle design, The

bber-Cone can support the weight of stackedGrabes and bases without permanent distortion.cone

Its low density polyethylene material anddle design prevents the cones from stickinghandther when stacked. The Grabber-Cone can betogetked with or without bases.stack

Cones stacked with rubber bases Alternate stacking method

p p y p28'' Grabber-Cones with caution tape provide an ideal way to protect hazardousoff road areasoff-road areas

42'' Grabber-Cone with recycled rubber base

sRubber BaseThe composite

ffersconstruction ofstrength and

es are madedurability. Baseycled rrub-from 100% recy16 or 30ber.(Weight 10, 3

lbs.)

288'' Grabber-Cone with recycled rubber base

s wiGrabber-Cones ith (1) 4''andand (1) 6'' ba d of whitetingreflective sheet

42” Grabber-Cone with (2)” orange and (2) 6” white6”ands ofba 3M™diamondade reflective sheetinggra

42” Grabber-Cone with (2)g ( )4 orange and (2) 4 white4” orange and (2) 4” white

bands of 3M™diamondgrade reflective sheeting

ffiChannelize traffic with 42'' Grabber-Cone andoptional plastic barricade panels

Flange DesignFlange DesignThe extra large flangedbottom supports the coneswhile in use or when stackedwith the rubber base.

8

NCHRP 350 TESTED


WZ – 24WZ – 24

CERTIFIEDCERTIFIED

CRASH WORTHY

42000 Series

• The Grabber-Cone measures 28'' or 42'' in height• Made of flexible low density polyethylene• Bright orange color molded throughout• UV inhibitors to minimize fading• Grabber handle patented design allows for easy

movement and prevents cones from sticking• Stackable for storage and transport• Available with various size and types of

reflective sheeting• Available with keyhole slots and plastic barricade

panel (42'' Grabber-Cone only)• Bases will not crush when run over• Meets Federal MUTCD. standards

Grabber-Cone Features

2'' Grabber-Cone with caution tape wrapped42round handlear

42” Grabber-Cone with stop sign4 bb hnd warning lightanand warning light

42'' Grabber-Cone withdi ectional a ow signdirectional arrow sign

The Grabberr truck kit is a handy assortment of linkableplastic barriicade panels and 42'' Grabber-Cones. Toggled panels come in 2, 3, 4 and 6 foot lengths.

8”x36” Grabber Vertical PanelBarricade with light and 30 lbb.

recycled rubber basel d bb brecycled rubber base42'' Grabber-Cone and plastic rails can totally enclose holes and42'' Grabber Cone and plastic rails can totally enclose holes andconstruction work areasn work areas

42 Grabber-Cone as a linkable barricade with42'' Grabber Cone as a linkable barricade withinterchangeable signs

9

• Paraddes/crowd control• Narroow work areas• Waterr/flood control• Lane closures• Tree ttrimming• Channnelize or delineate traffic• Barriccade construction work zones• Vehicuular or pedestrian traffic control• Parkinng lot traffic control, striping

or resurfacing

10

TrafFix Grabber-Tubesff

Grabbeer HandleG bb H dlConvenient handle designallows foor easy movement andplacemeent of Grabber-Tube

Grabber-TubebbeThe stem of the Grab r-Tube is made of flexible yet durableet durable-olyethylene material, with UV inhibitors tofluorescent low density po

minimize fading.n the stem protect the reflective bands, miThe recessed areas on ini-s.mizing rips and scratchesge at the bottom of the stem allows theThe extra large flang

mly in place.rubber base to hold it firm

Rubber BaseThese 12 lb. and 18 lb. bbases aremade from 100% recycycledrubber.

28'' Grabber-TubeModel 42133-TRU12

42'' Grabber-Tube 42'' Grabber-Tube with plastic sign

With the convenient Grabber-ee Tube handle, you can easily and quickly tie or wrap caution tape from one tube to the next. The innovative handle design enables youto easily move, set drag, or lift the Grabber Tube.to easily move, set drag, or lift the Grabber-Tube.

NCHRP 350 TESTED


WZ – 24WZ – 24

CERTIFIED CERTIFIED

CRASH WORTHY42000 Series

46000 Series

Looper-Cones stack for g pstorage and transport.

StackableLooper-Cone with the patented reinforcedhandle design can be stacked withoutsticking together – the durable low density polyethylene plastic keeps thecones shape, reducing crushing andbreaking.g

per-ConeLoop will accept andard or “D” cella staricade light.barr

Looper-Cone with convenient handle design allows for easy movement and placement.

42” Looper Cones with caution tape around handles.

Rubber BasesLooper bases are made from 100% recycled rubber in 10, 16 and30 lb weights — with convenient carrying handles.

Model 46164-CRU-16HP 42” Looper Cone with One 6” and2” L p C ith O 6” dOne 4” Reflective Band and 16 lbbase.

Model 46266-CRU-30DG42” Looper-Cone with two 6” orange andtwo 6” white Reflective Bands—DiamondGrade Reflective Sheeting and 30 lb base.

p42” Looper-Cone with clip-on sign

NCHRP 350 TESTED


WZ – 189 WZ – 189

CERTIFIED CERTIFIED

CRASH WORTHY

11

TrafFixff Looper-Cones™

Looper-ConeTM is a 42'' all plastic cone (trim line channelizer)that can be ballasted with a 10, 16 or 30 lb. Recycled Rubber Base.

46000 Series

beLooper-Tub TM isfrom durablemanufactured

olyethylene, withhigh density poadded to minimize UV inhibitors a

fading.ed areas on theThe recesseelp protect theLooper stem heting from tearingreflective sheetg.and scratchinge flange on theExtra largeLooper-Tube bottom of the Lthe base in place.securely holds

42” Looper-TubeTM with clip-on sign

Closing off an area of the job site is quick and easy utilizing the unique “loop” stylehandle with two or more Looper-TubesTM

tied together with caution tape, flag line or rope.

bber BaseRuboper bases are made from Loo0% recycled rubber10012 and 18 lb weights in 1with convenient carrying– wndleshan

Looper HandleLooper-TubesTM unique “loop”style handle make grabbing and moving a breeze

NCHRP 350 TESTED

by FHWA by FHWA

Category 1Category 1 Self Certification Self Certification

CERTIFIEDCERTIFIED

CRASH WORTHY

42” Looper-TubeTM with two 3”reflective bands and 12 lb base

12

TrafFix Looper-Tubes™

46000 Series

Model 42000 TR12Model 42000-TR12Model 42000 T

TrafFix Barricade Products

• Plastic Barricade Rails •A-Cade & Metro Barricades •Type III Barricades•Vertical Panel Barricades • Plastic Folding Barricades •TrafFix Cone

TrafFix Baff rraa icade RailsStrength and FlexibilityIf you’re tired of broken wood or bent metal barricadepanels, TrafFix Devices has the answer for you. Theflexible yet durable all plastic TrafFix Rail has been inuse for over ten years. It’s made of impact resistantpolyethylene to withstand the rough treatment foundin construction work zones.

Try this with a wood ormetal barricade panel

TrafFix-Rails unique I-beamdesign protects the expensivereflective sheeting fromscratches and abrasions.Rails nest for storage.

TrafFix-Rails weigh lessthan one pound per footso it’s lightweight andeasy to carry. Rails nestfor transportation. Nosharp edgesharp edges or splinters.

ade with 8' rail, barricade lightsTrafFix A-Cadn plastic signand clip-on

TrafFix-Rail combinesflexibility and durability

44000 Series

15

TrafFix A-Cadesff

fTrafFix A- f fCades with 4, 6, 8, and 12 foot TrafFix-Rails.fl f fThe reflective area of the TrafFix-Rail is 8'' wide.

The Rail-ClipClip is idealfor mounting sng signsto TrafFix-Rails

TrafFix A-Cades have built-instacking lugs for slip-free storage.

Sand fillable compartment holds up to 15 lbs.of sand.

TrafFix-Rail’s unique I-beam design fitssnugly into the designated slot in the A-Cadeleg. There’s also a slot for 1'' x 8'' or 2'' x 8''nominal lumber of various lengths.

Durable and ConvenientThis impact resistant polyethylene, rigid, A-framebarricade is sand fillable for ballasting, stackablefor storage and transportation, and also acceptsa standard barricade light.

NCHRP 350 TESTED


WZ – 24WZ – 24

CERTIFIEDCERTIFIED

CRASH WORTHY

TrafFix Tff ype IIITT Barraa icades

TrafFix Breakaway Type III Barricade utilizes

the all-plastic TrafFix-Rail and Rail-Clip for

mounting to wood, metal or plastic uprights.

Complete Type III Breakaway Barricade is

available using Unistrut’s Telespar tubing with

breakaway base, bracket and detachable feet.

TrafFix Type III Barricades come in 4, 6, 8 and 12 foot lengths

DESIGNEDWITHBREAKAWAYBASE

Rail Clip cann be usedfor mountinng theTrafFix-Raill on squaretubing or anny type orsize of woodd, metal orplastic uprigghts.

sedA Tie-Bar is usportfor added supp

and rigidity.

vehicles.Breakaway Base yields to impacting vntEasily detachable feet allow for efficien

p , y gp , y gtransportation, assembly and storage.rson.Complete Type III Barricade can be assembled and disassembled in a matter of minutes by one per

16

NCHRP 350 TESTED

by FHWA by FHWA Acceptance LetterAcceptance Letter

WZ – 3WZ – 3

CERTIFIEDCERTIFIED

CRASH WORTHY

Phoenix Type III53000 Series

• NCHRP 350 approved with (2) standard barricade lightsor (2) small LED-B lights

• Comes complete with (2) 40 lb. recycled rubber and steelbases

• Available with (2) 72” steel or plastic predrilled uprights• Plastic barricade panels available in 4’, 6’, 8’, 10’ and 12’

lengths• Available with 3M Engineer Grade, High Intensity or

Diamond GradeTM Reflective Sheeting• Quick release pin for easy removal of barricade uprights

from base• Lightweight — easy one-worker setup and breakdown• Bases nest together when stacked for easy storage and

transport

Type I Metro-A-Cade with Phoenix Rail

Type I Metro-A-Cade with Phoenix Rail

Metro-A-Cadewith Phoenix Plastic Rails

• NCHRP 350 approved with (2) standard barricade lights• 40” durable plastic leg• Accepts Phoenix Plastic Rails and 1” x 8” or 2” x 8”

nominal lumber• Available as Type I or Type II barricade• Accepts standard barricade light• Metro has built in stacking lugs for slip-free storage

44040 Series

17

TrafFix Tff ype I, II & IIITT Barraa icades

NCHRP 350 TESTED


WZ – 189WZ – 189

CERTIFIEDCERTIFIED

CRASH WORTHY

NCHRP 350 TESTED


WZ – 108WZ – 108

CERTIFIEDCERTIFIED

CRASH WORTHY

18

40000 Series

NCHRP 350 TESTED


WZ – 252WZ – 252

CERTIFIEDCERTIFIED

CRASH WORTHY

Premier PanelTM s an all plastic and rubber verticalisat is designed to take repeated imppanel barricade th acts

amage to the Premier Panelwith little or no da TM or to theimpacting vehicle

nConvenient handle designt andallows for easy movemen

placement of the PremierPanelTMll

Premier PanelTMll accepts standardand new “D” cell barricade lights Premier PanelTMll stacks for easy

storage and transportation

Rubber Bases - available in20 and 30 lb weights; made from100% recycled rubber with moldedhandles and built in stacking lugs

Model 40236-W-HI20White Premier PanelTMll with 8” x 36”reflective sheeting and 20 lb recycledrubber base

Model 40229-O-HI30Orange Premier PanelTMll with 8” x 29”(270 sq inches) trapezoid reflectivesheeting and 30 lb recycled rubberbase

Model 40224-W-HI20White Premier PanelTMll with 8” x 24”reflective sheeting and 20 lb recycledrubber base

Model 40236-O-EG30-SOrange Premier PanelTMll with 8” x 36”reflective sheeting and “SLOW” messageand 20 lb recycled rubber base

Premier PanellTMTMllll comes with a variety of sheeting sizes andh f h dmessages – and is available in orange or white plastic

x Premier Panel ™

cal Panel BarricadeGrabber Verticportiion of the barricade is madeThe upper pormulated flexible polyethylene plastic.from specially fo, reshapeable and will absorb repeatedIt’s reboundable,his means to you is no more brokenimpacts. What thstems, bent metal pieces, nails or anywood or plastic sIt also eliminates painting and mini-other fasteners. Ing of wooden barricades – savingmizes refurbishinnd money.you both time anmade fromThe base is 100% recycled rubber

bs. Ideal for high speed applicationsand weighs 30 lbitions, this base eliminates the need forand windy condiill not “walk” or tip. Its narrow rectan-sandbags and wiperfect for applications where space is agular design is pts easy grip handle lets you carry theconcern. Itease. A 16 lb. base is also available forbase withed applications.lower speentire Grabber Vertical Panel Barricade isThe encyclable. Manufactured from recycled100% recs, (over 90% by weight with 30 lb. base)material

cade meets Federal M.U.T.C.D. standards.this barric

Grabber Verta ical Paneaa l Barricadaa es

Grabber HHandleConvenient hhandle designallows for eaasy movementand placemeent of verticalpanel barriccade.

Rubber BaselesMolded-in handl

asilyenable you to easlift and carry thi

30 lb.1 led00% recycrubber base.

8''x36'' GrabbberVertical PaneelBarricade witth 30 lb.recycled rubbber base

Grrabber Vertical Panelaa Ba come in arricades caa variety of sizes and messagea s.TheTh vertticali l panels can bel baa applied to one or two sid

ytt esdd of the cone .e

ber8''x24'' GrabbVertical Panel

h 16 lb.Barricade wither baserecycled rubbe

Extra large flangeallows the rubberbase to hold stemfirmly in place.firmly

8''x36'' Grabber Vertical Panel stems'x36'' Grabber Vertical Pstacked on 30 lb. recycled rubber base

Stackable StemThe Grabber Vertical Panel Barricadestem with its flexible plastic panels,can be stacked for storage as well astransporting to and from the job site.

''x36'' Graabber8'ertical PaneelVearricades wwithBa

messages annd 16 lb.mecycled rubbberreases. ContaactbarafFix Devicces forTromplete list ofcovailable leggends.av'x36'' Grabbber8'

ertical PanelVearricade withh lightBand 30 lb. recyycledanubber baseru

19

NCHRP 350 TESTED


WZ – 24WZ – 24

CERTIFIED CERTIFIED CRASH WORTHY

Type I Barricade with 8” x 24” toppanel and 6” x 24” bottom panel.l d 6 4 b l

Type I Barricade with 12” x 24” toppanel and 6” x 24” bottom panel.l d 6 4 b l

(Optional breakaway sand bag bar pictured above)

Type I Barricade with 8” x 24” top paneland 8” x 24” San-Fil bottom panel.

Type II Barricade with 8” x 24”top panel and bottom panel.

TRAFFIX PLASTIC FOLDINGBARRICADE FEATURES

� Made from durable impactresistant polyethylene

� Blow molded legs provideincreased strength to minimizebarricade damage and to preventsagging in extreme heat

� Lightweight and easy to handle

� Wide selection of Type I and TypeII barricades are available

� Modular design allows for easyreplacement of components

� Unique San-Fil bottom paneleliminates messy sand bagsand stabilizes barricade inwindy conditions

� Fully assembled barricades withmounted lights are stackable

� Barricade is 100% recyclable

� Panels are recessed toprotect reflective sheeting

� Meets M.U.T.C.D. standards

TrafFix Devices offers two series of foldingplastic barricades using durable blowmolded plastic legs. The 36000 Seriesbarricades feature Economy (injectionmolded) panels while the 37000 Seriesuses High Impact (blow molded)panels. Because the Plastic FoldingBarricade is assembled with individualcomponents, you can select anycombination of top and bottom panelsas listed below.Top Panel Sizes: 8” x 24” or 12” x 24”Bottom Panel Sizes: 4” x 24”, 6” x 24”

or 8” x 24”You can also specify engineer, highperformance, or diamond grade reflectivesheeting. The optional sand bag bar isavailable with all barricade combinations.

20

NCHRP 350 TESTED


WZ – 24WZ – 24 WZ - 46WZ - 46

CERTIFIEDCERTIFIED

CRASH WORTHY

TIRED OF THROWING AWAY $$$TIRED OF THROWING AWAY $$$If you’re tired of wasting money by discarding bent metal legs, broken wood panels, or

unrepairable plastic barricades, consider the TrafFix Modular Plastic Barricade.This barricade is constructed from impact resistant plastic, and all the components can bereplaced should they become damaged.

You can SAVE $$$ by repairing your barricade and you also reduce material going intoour landfills. The TrafFix Plastic Folding Barricade is 100% recyclable.

The Latest Innovation In Plastic BarricadesWith All-Modular Components

olded-in male andMomale stacking lugs keepfemarricades firmly inbaace for shipping andplaorage.sto

Combination metal hinge/gg bolt protector (bushing),//keeps barricade legs tightly locked together.

Anti-skid gripper teeth are molded-into the bottom of each leg to help keepthe barricade firmly in place.

ination metalCombihing /e/gg bolt protector//

ing) and steel(bushinrcing washerreinforlight firmly andholds lly in place.securel

Optional San-Fil bottom panel holdsup to 15 lbs. of sand. An ideal way tostabilize the plastic barricades without

using messy sandbags. San-Fil panels can beimprinted with raised molded-in letters,

or stenciled with your name or logo.

21

22

Introducing the 35000 Series barricades, featuringmetal legs with Economy (injection molded) orHigh Impact (blow molded) panels.Now you can combine the strength of impactresistant plastic panels with traditional metal legs.These barricade components come together to forma more durable folding barricade.

Type I Barricade with12” x 24” top

panel and 6” x 24”bottom panel.

Type II Barricadewith 8” x 24”

top and bottom panels.

TrafFix Metal Leg & Plastic PanelBarricades

� Meets M.U.T.C.D. standards

� Durable impact resistant plastic panels

� Panels are recessed to protect reflective sheeting

� Panels are reinforced to increase stiffness andreduce bending or warping

� Angle iron legs are painted white

� Galvanized steel legs available upon request

� Choose from the following components:Top Panel: 8” x 24” or 12”x 24”Bottom Panel: 4” x 24”, 6” x 24”or 8”x 24”Leg Thickness: 14 or 12 (Heavier Gauge)

NCHRP 350 TESTED


WZ - 46WZ - 46

CERTIFIEDCERTIFIED

CRASH WORTHY

35000 Series

23

TrafFix Vertical Panel Barricades

TrafFix Vertical Panel Barricadesconsist of durable blow moldedpolyethylene panels and recycledrubber bases.

To assemble, simply“Step-n-Lock”the vertical panel into the base.No heavy rings or bases that mustbe lifted over the top of the panel.

For transportation and storage,both the panels and bases can beeasily separated and stacked.

The panel separates from thebase when impacted by a vehicle.

The panel face is recessed tominimize abrasions and scratchesto the expensive reflective sheeting.If severly damaged, the reflectivesheeting can be replaced.

The bases are made from recycledrubber and weigh either 28 or 43lbs.

36” x 8” TrafFix Verticalf lfPanel Barricade

Stop for Pedestrianswith 28lb. recycled

rubber base34000 Series

24” x 8” TrafFixVertical Panel Barricade

with light and 43lb.recycled rubber base

34000 Series

24” x 12” TrafFixVertical Panel Barricade

with light and 43lb.recycled rubber base

33000 Series

Step-n-Lock PanelL k P lSix locking buttons are molded into thepanel and correspond to six matchingrecesses molded in the base. Simply stepdown on the foot hole to lock the panel inplace. The Step-n-Lock design ensures thepanel will remain vertically locked in placeand “square to traffic.” Panel sizes, messagesand legends can be intermixed with eitherthe 28 or 43lb. base.

Rubber BaseRubber BaseMade from 100% recycled rubber, thebase incorporates two easy-grip carryinghandles. A vulcanized rubber centersection provides reinforcement fromwear and tear due to panel separation.On the under side of the base, there arefour raised anti-rotational foot padsto minimize movement from wind, orturbulence from passing vehicles.

36” x 12” TrafFix VerticalPanel Barricade

State Law Yield toPedestrians Within

Crosswalkmeets MUTCD Standard

33136-LDG43

Messages and LegendsMessages and LegendMessages and LegendA wide variety of messages and legends canbe printed on one or two sides of the panel.Engineer, high performance or diamond gradereflective sheeting is available. Ideal for parkinglots, schools, churches, or in-plant applications.

Light mounting holeand built-in ledge toeliminate light rotation

Easy grip carrying handdle

tep-n-Lock footStole allows easyhoet secure assemblyyef panel to baseof

Molded-inMmale and femalemtacking lugsst

NCHRP 350 TESTED


WZ - 24 WZ - 24 WZ - 73 WZ - 73

CERTIFIED CERTIFIED

CRASH WORTHY

24

Left Hand Vertical Panel

TrafFix Coneffe high density polyethylene plastic, the rugged TrafFix Cone has multiple uses in a wide variety ofMade of durable

ations. The cones are stackable for storage and transportation but won’t “stick together” like vinyl cones.different applica

nes have a hollow base that can be filled with up to 23 lbs. of sand, orThe TrafFix Connes have a hollow base that led with up to 23 lbs. of sand, r simply drop a sand bag on it in

nwindy conditionns.

he TrafFix Cone is 42'' tall and comes witThhe TrafFix Cone is 42'' tall and th keyholeots for mounting toggled TrafFix Rails (sesloots for mounting toggled TrafF ee Grabberee Grabberone illustrations). Reflective collars can be used forCoone illustrations) Reflective coone illustrations) Reflective co be used forighttime use.ni

ConThe TrafFix ne is ideal for mounting signs andne is ideal for mounting signs andights for temporary traffic control. Idealgbarricade lig ts for temporary traffic control. Ideal

for school crossing guards, cross-walk striping,for school crhotel/motel check-in areas and parking structures.

The TrafFix Cone has a hole near the top and a ledge or shelf that makes it ideal for mounting small signs. The TrafFix Cone has many uses in con-

struction areas, parades, county fairs, or wherever safety or crowd control is needed. The cone also makes a great stanchion or support for plastic fence

and other flexible products.

Barricade Lightor Sign MountingHole

Key-hole Slotsfor mountingTrafFix Rails

Handynn Guide For Ordering Barricade PanelsaaHorizontaln Barraa icade Paneaa ls

Vertical Barricade Panels

Left Hand Rail

Right Hand Vertical Panel

Right Hand Rail

Ledge keeps lightsand signs in anupright position

TrafFix Sign,Stand and AccessoryProducts

• Roll-Up Construction Signs • Portable Sign Stands• Sign and Stand Accessories • Miscellaneous Products

26

Roll-Up Construction Signs

tive mesh orAvailable with non-reflectyl, Reflexitevinyl; and reflective vinynd GradeMarathon or 3M Diamon

material

Large variety of standardsign legends-custom signlegends and overlays arealso available

Little Buster sign stand with48”x 48” reflective roll-up sign

agsAdvance warning fla

24000 Seriesabric corner pocketsSewn fa

26000 Seriesstic corner pocketsPlast

Signs available in36”x 36” and 48”x 48”

27

Flag Brackket forboth wood or plasticdowel flagss

th TrafFix E-Z UPPictured withag bracket and flagspivoting flag

Little Buster sign stand with48”x 48” roll-up sign

ble fiberglassFlexibleracecross br

Pictured with TrafFix ClearPlastic Corner Pocket

Anti-kiting strapap

E-Z UPbracket and flags

Roll-up Sign Bracket

TrafFix stainless steelbracket and flags

Economybracket and flags

Unniversal SignMoounting Bracket

3-nn-1 SignMoounting Bracket

Velcro tie strap

Sewn Corner Pocket

Orange Plastic Corner Pocket

Clear Plastic Corner Pocket

Pictured with Roll-up Sign Bracket –The Universal Sign Mounting Bracketand the 3-n-1 Sign Mounting Bracketcan also be utilized

28

*Other manufacturers materials are also available

Material Options and Standard LegendsStandard Construction Sign LegendsAvailable in Sizes 36”x 36” or 48”x 48”

1. Accident Ahead2. Be Prepared To Stop3. Crew Working In Trees4. Detour Ahead5. Flagger Ahead (Words)6. Flagger Ahead (Symbol with Flag)7. Flagger Ahead (Symbol with Paddle)8. Fresh Oil9. Lane Closed

10. Left Lane Closed Ahead11. Men Working (Words)12. Men Working (Symbol)13. Mowers Ahead14. One Lane Road Ahead15. Prepare To Stop16. Ramp Closed Ahead17. Right Lane Closed Ahead18. Road Closed Ahead19. Road Construction Ahead20. Road Work Ahead21. Shoulder Closed22. Shoulder Work23. Shoulder Work Ahead24. Signal Work Ahead25. Single Lane Ahead26. Survey Crew27. Survey Crew Ahead28. Transition Symbol Left29. Transition Symbol Right30. Transition Symbol (With Overlay)31. Tree Work Ahead32. Truck Crossing33. Utility Work Ahead34. Work Area Ahead35. Workers Ahead36. Blank sign with border37. End Road Work (24”x 48”)

Standard Sign Overlays

Overlays forthe wordsRIGHT OR LEFT

CENTERLEFTRIGHTBLANK

Roll-up construction signs come in a variety of differentmaterials and legends as illustrated below. Thesesigns utilize pultruded fiberglass crossbracingor ribs along with a variety of corner pocketsto achieve maximum performance, evenin the windiest conditions.

Bright OrangeNon-Reflective Mesh

Reflexite®

FluorescentReflective Vinyl*

3M FluorescentDiamond GradeSign Material*

Non-ReflectiveVinyl

Overlays forthe wordAHEAD

500 FT.1,000 FT.1,500 FT.1⁄1

2⁄⁄ MILE1 MILEDirectional ArrowBlank

29

TrafFix Devices’manufacturingfacility has the capability offabricating a wide range ofcustom sign legends in avariety of sizes, materials andcolors. For more information,or a price quote, call ourcustomer service department.

g g48”x 60” white mesh sign with black lettering

24”x fl g60” non-reflective mesh signwith black lettering

36”x 36” or 48”x 48” mesh, reflective vinyland non-reflective vinyl signs

36”x 36” or 48”x 48”y g fl y gfluorescent yellow-green reflective vinyl sign

36”x 48”white reflective signwith black lettering

24 x 48 non-reflective mesh Arrow Sign24”x 48” non reflective mesh Arrow Signwith reversible Arrowhead overlay

Custom Rooo ll-Up Signsiand Overlavv ysaa

30

Roll-Up Sign Accessories

Sewn Corner PocketSewn Corner Pocket

Orange Plastic Corner PocketOrange Plastic Corner Pocket

p p p ff yRib slips into plastic corner pocket effortlesslyb l l

TrafFix Clear Plastic Corner PocketTrafFix Clear Plastic Corner PocketTrafFix Clear Plastic Corner Po–Made of flexible, yet durable plastic

it resists cracking or breaking.• Holds frame securely in place

out of shapetretch• No rubber bunge cords to sten in highto ope• No sliding pockets t

hutwinds or to freeze sh

Universal SignMounting BracketAllows TrafFix sign tobe mounted to roundor square posts, orrigid sign masts.

3-n-1 Sign Mounting BracketThis unique bracket has (3) separateslots for mounting signs to most types

and sizes of posts or sign masts.

Roll-up Sign BracketHolds any 30”, 36”or 48”roll-upsign, and can be mounted onany square rigid sign mast.Sign with cross bracing quicklysnaps into roll-up sign bracket.

31

Roll-Up Sign Accessories

E-Z UP bracket and flags

Economy bracket and flags

gSign Storage Baggn Stoorage BagA sturdy roll-up Sigarryingg handle,with convenient caign cleean andhelps to keep the siase andd oil.free from dirt, grea

Flags up for advance warning

Flags down for storageFlags down for storage

TrafFix Flag Assemblye pivoting design allowsUniqu

oll-up flags with the signyou to roct and convenient storage.for compaclosing or misplacing flags.Eliminates

ss steel flag bracket mountsThe stainlesal sign frame and holds upto the verticacurely in place.to 3 flags sec

32

TrafFix Safe Sign-350 Sign Blanks

t of 48”x48” Safe Sign-350 sign blanks ready for shipmentPallet

Cross section of Safe Sign-350 sign blank

Finally, there’s an alternative to heavy plywood and aluminum signs with their sharp edges and bent corners. Introducing the

Safe Sign-350 from TrafFix Devices. The Safe Sign-350 is a specially corrugated plastic sign blank that is lightweight yet rigid.

It’s tough enough to hold its shape both while stacked on the truck and on the construction site. This special plastic sign blank

has been UV stabilized and is ready to have reflective sheeting applied to it. The Safe Sign-350, is colored orange throughout,

and is available in 36”x 36”, 48”x 48”and 48”x 96” sizes. Safe Sign-350 is ideal for all types of rigid sign applications and has

been NCHRP-350 approved for use with TrafFix Devices’ sign stands.

NCHRP 350 TESTED


WZ - 73WZ - 73

CERTIFIEDCERTIFIED

CRASH WORTHY

27000 Series

33

ZephyrPyy ortable SiPP gn Sti andForUseWith 36”and 48”ii Roll-Up CoUU nstruction Signs

The Zephyr portable sign stand is constructed of a steel platemolded into a recycled rubber base (weight 38 lbs).Two molded-in carrying handles allow for easy movementand placement of the Zephyr stand.

The Zephyr sign stand is easy to use – simply release thelever and raise the mast to lock it into the upright position.No further adjustments are necessary. No folding legs thatextend out into traffic.

The plastic corner pocket at the bottom of the sign allowsThe plastic corner pocket at the bottom of the sign allowsfor quick and easy mounting of sign to stand. Just insertthe corner pocket and press down. The sign automaticallylocks in place. To remove the sign, simply lift the releaselever. The big rubber base (28” x 17 1⁄1

2⁄⁄ ”) is skid-resistantand is stable enough to remain in place, even in windyconditions. Zephyr “spills the wind” without the use ofbulky springs.

The Zephyr low profile sign stand takes up very little storageThe Zephyr low profile sign stand takes up very little storagespace in the truck (only 4” tall when folded). Stacking lugsare molded into the base for easy storage.The vertical mastfolds down and locks in place to minimize damage duringloading, transporting, and unloading the stand.

26000 SeriesNCHRP 350 TESTED


WZ - 46WZ - 46 WZ - 73WZ - 73

CERTIFIEDCERTIFIED

CRASH WORTHY

34

TrafFix StandsForUseWith 36”and 48”ii Roll-Up CoUU nstruction Signs

22000 Series

From left to right: TrafFix stand, TrafFix stand withl f i h T f i d T f i d i h10” height extender and TrafFix stand withuniversal sign holder

TrafFix Sign Stand with Unique Step-n-Drop Legs

This highly advanced Step-n-Drop feature enables you to quickly set-up thestand without having to bend over or stoop down. Simply place your footon the release lever, step down and two legs will drop into position. Repeatthe process for the remaining two legs and you are ready for the sign.

TrafFix Single Spring Sign Stand

For those extra windy applications, TrafFix Devices introduces an all newsingle spring sign stand. The stand has Step-n-Drop legs and all the otherfeatures and benefits listed above. The stand comes with the traditionallatch bracket connector for plastic corner pockets, or the universal signholder which is ideal for sewn corner pockets and other manufacturersroll-up signs.

e stand is compact,They to carry and storeseasymall areas. All partsin sm

n be easily replaced.canomplete parts list isA coincluded with eachistand.

22300 Series

NCHRP 350 TESTED


WZ - 46WZ - 46 WZ - 73WZ - 73

CERTIFIEDCERTIFIED

CRASH WORTHY

35

All steel construction with powder coated paint to resist rusting

TrrafFix stand’s tip resis-taant design effectivelysppills the wind and holdsa 36”x 36” or 48”x 48”rooll-up sign securelywwithout heavy springsorr a bulky mast

special TrafFix HeightThe snder adapts to the standExtendded height, or wherefor admum sign height ismaxired without raisingrequi

egs.the le

The telescoping legs create a wider stance for added stabillityin high wind situations. Just pull legs out when needed, and retuurnlegs back to original position for storage.

The stand can also be adjusted to 3 height levels, dependiingon your particular situation. Each leg can also be independentlyyadjusted for greater stability on uneven terrain.

Ground Mount StandThis economical stand is ideal forshort duration jobs. Simply drivethe pointed metal end of the standinto the ground by stepping on thehorizontal side bars. Holds 36”or 48”roll-up signs firmly in place.

sal sign holderUniversany manufacturer’sallows asign to be usedroll-up s

afFix standwith Tra

AdapterRigid Sign ARigid Sign Adapterring adapter converts a TrafFix stand forThis single sprnto a stand that will accommodate aroll-up signs in

d sign. Simply drop the custom latch36”x 36” rigidctor into the sign stand to lock in place.bracket connec

TrafFix stand shownwith 36”x36” mesh signand flag assembly

Aluminum Leg TrafFix SingleSpring Sign Stand

This aluminum leg version of theTrafFix sign stand with spring isideal for those applications thatrequire lightweight, corrosion resis-tant aluminum. The longer legsprovide added stability in windyconditions.

22700 Series

36

Phoenix Sign Sti and

At last, a simple and easy way, to mount signs that are different in size and shape to ONE sign stand. The new Phoenix Sign Stand

is designed with a pre-drilled square upright to accommodate hole patterns found in most size signs. You can raise and

lower signs anywhere along the six-foot long upright for more flexibility. The Phoenix Sign Stand is NCHRP-350 approved,

with a 48”x 48” .080 aluminum sign, as well as, other size signs and with an optional barricade light and flags. The recycled

rubber base with steel plate firmly grips the road surface, while presenting a narrow profile. Two Phoenix Sign Stands can also

be used to support barricade panels to create a type III barricade.

nPhoenix Signn Stand withnttwo different ssize signs

Phoenix Sign Stand with48”x 48”.080 aluminumsign, advance warninglight and two flags

NCHRP 350 TESTED

by FHWA by FHWA Acceptance Letter Acceptance Letter WZ - 73, WZ - 108,WZ - 73, WZ - 108, WZ - 113, WZ - 189WZ - 113, WZ - 189

CERTIFIEDCERTIFIED

CRASH WORTHY

37

The Phoenix Sign Stand consists of four components

• 6' long pre-drilled square upright • Recycled rubber base• Steel Base Plate • Steel locking pin

Ease and flexibility come to mind when assembling the Phoenix Sign Stand. Simply place the pre-assembled recycled rubber

base and steel base plate on the ground and insert the square upright into the center opening and secure it with the steel locking

pin. Once this is complete, you can attach a multitude of sign configurations to the Phoenix Sign Stand. Each individual

component can be replaced if damaged.

This top view of theThi t i f th recycled rubberl d bbbase, and top of the steel base plate(visible in the center), illustrates howthey go together. Four stacking lugs arelocated in each corner of the base andhelp hold sand bags in place duringwindy conditions. Together, the rubberbase and steel plate weigh 40lbs.

This bottom view of the recycledh b f h l drubber base, with the steel base plate(visible in the center), illustrates thefour anti-skid foot pads that helpkeep the Phoenix Sign Stand properlyoriented toward oncoming traffic.Two molded in carrying handles arelocated on either side of the base.

Once the recycled rubber base and steelplate are assembled, they can virtuallyremain together until you decide toseparate the two pieces. The stackinglugs allow the bases to nest togetherwhile taking up very little spaceon the truck or in storage.

nti-skidAnot padsdsfoo

tackinggStugslu

Acctual size of uprightis 6' in lenght

PhoenixPhoeni Sign Sti and Featuresn

90000 Series

38

Tri-BusterLeg Extending

Leveling KitStock# 93000-EXT

TrafFix Tri-Buster Tripod Sign StandThe Tri-Buster Tripod Sign Stand is the idealcombination of durability, economy, safety, and

p gp

versatility. Perfect for the needs of many contractors,y y yy

municipalities and utility companies.y

• Constructed of corrosion resistant heavy duty steelgalvanized tubing for long life at an economical cost.

• NCHRP 350 approved with 48” x 48” or smaller;plywood, aluminum, Aluminum poly laminate, plastic,and roll-up sign materials.

• Three leg design is very stable in windy conditions.Ballasting hook allows sand bags or weights to be hungfrom sign stand for added stability.

• A built-in 3-flag holder secures 2 or 3 standard 3/4”wood dowel flags above the sign.

• Safety engineered with guards to eliminate dangerous“pinch points” and protect fingers.

• Optional Roll-Up Sign Bracket (93000-RUB)and Leg Extending Leveling Kit (93000-EXT)may be ordered to enhance Tri-Buster’sperformance.

• Compact design allows Tri-Buster to be foldedso that it stores in minimal space.

dTri-Buster Sign StandStock# 93012

Folded Tri-Buster Stanr StandDimensions: 4.5”W x 3.25”D x 53”L53”L

lTri-Buster optionalRoll -Up Sign BracketStock# 93000-RUB

NCHRP 350 TESTED


WZ – 207WZ – 207

CERTIFIEDCERTIFIED

CRASH WORTHY

93000 Series

Econo Buster Sign Sti andApproved with Roll-Up Signs, Safe Sign-350 Plastic

Signs and with the Safe Sleeve-350 Bracket forpp p g gp g g

.080 Aluminum signs

80000 Series

Econo Buster is a lightweight (30 lbs.) yet

durable stand for 36”x 36” and 48”x 48” roll-up

or rigid signs. The telescoping inner mast allows

all types and sizes of signs to be mounted at vari-

ous heights. The powder coated paint on the steel

legs and telescoping mast resists rusting. The

step-n-drop leg design enables you to set up

quickly without having to bend down or stoop

over (no pins to kick, push or pull). The three posi-

tion locking leg design allows you to adjust for

uneven terrain.

The Safe Sleeve-350 Bracket can be

substituted for the standard rigid bracket.

This bracket assures compliance with

NCHRP-350, when using .080 aluminum

construction signs.

no Buster Sign StandEconds for compact storagefold

Econo Buster Sign Standwith 36”x 36” rigid sign and

brackets with flag holder

Econo Buster Sign Standwith 36”x 36” roll-up sign

NCHRP 350 TESTED

by FHWA by FHWA Acceptance Letter Acceptance Letter WZ - 24, WZ - 46,WZ - 24, WZ - 46,

WZ - 108 WZ - 108

CERTIFIED CERTIFIED

CRASH WORTHY

39

40

TrafFix Little Buster Sign Stand

Little Buster sign stand with48”x 48” rigid sign and two flags

24000 Series

Little Buster sign standfolds for compact storage

Little Buster Sign Standd

Designed to hold 30”, 36” annd 48” aluminum, wood, plastic

or roll-up signs. All steel connstruction with powder

coated paint to resist rustingg. Telescoping mast

with adjustable rigid or rolll-up sign

brackets allow for variable ssign

height adjustments. Dual

spring mounted base for

added stability during

high winds. Step-n-Drop leggs

enable you to set-up in secoonds

without having to bend over or stoop

down. A two-position leg addjustment allows all

four legs to be individually adjusted for uneven

terrain. Flag holder will acccept standard 3⁄34⁄⁄ ” diameter

wooden or plastic dowel flaggs.

NCHRP 350 TESTED


WZ - 108, WZ - 206WZ - 108, WZ - 206

CERTIFIEDCERTIFIED

CRASH WORTHY

41

Approved with Roll-Up Signs, Safe Sign-350 Plastic Signs andwith the Safe Sleeve-350 Bracket for .080, .100 and .125p p g g gp g g

Aluminum Signs or 5/8” Plywood Signs

ithLittle Buster Sign Stand wirrrSafe Sleeve-350 Bracket foywood signsuse with aluminum or ply

Rigid SignSafe Sleeve-350

Bracket

Now you can be assured you are in compliance with

NCHRP-350 regulations when using .080, .100 and .125

aluminum signs. Just specify the Little Buster Sign Stand

with Safe Sleeve-350 Rigid Sign Bracket, to meet the

stringent NCHRP-350 standards.

1.1 Simply position theSi l i i hLittle Buster stand withStep-n-Drop legs so theSign Side label is facingoncoming traffic.

2. Place right foot onboth release levers locatedbetween the legs and stepdown. Both legs will fall tothe ground.

3.3 Walk to the other sideWalk to the other sideof the Little Buster stand,place your left foot on bothrelease levers and step down.The remaining two legswill fall to the ground.

4.4.4 Once all four legs areOnce all four legs areOnce all four legs arefirmly on the ground, pullup on the mast to lock legsin place. Now you know howto do the TrafFix Two-Step.

Instructions for Doing the TrafFix Two-Step

TrafFix Big Buster Sign StandApproved with Roll-Up and Safe Sign-350 Signs at any height and with

.080, .100 and .125 Aluminum or 5/8” Plywood signs at 5’ bottom height

60000 Series

The Big Buster signn stand has a steel base and two

springs so it can withstandd heavy winds as well as severe

wind gusts and air currentts created by passing

trucks. The legs and telesccoping mast are

made of lightweight alumminum to

reduce carrying weight.

Big Buster is designned to

hold 5/8” plywood or .0800, .100 and

.125 aluminum signs 5 feeet off the ground.

It can also be used to holdd a roll-up sign 7 feet

off the ground.

Big Buster comes wwith the same Step-n-Drop

leg release system found oon the Econo Buster, Little Buster

and TrafFix stands. A two pposition leg adjustment allows all four

legs to be individually adjusted for uneven terrain. A built-in

bracket holds up to three flags with wooden or plastic dowels.

Big Buster Sign Standfolds for compact storage

Big Buster Sign Stand with 48”x 48” rigid sign 5 feet off the ground

SET-UP IS A BREEZEWITH BIG BUSTER SIGN STAND

WITH STEP-N-DROP LEGS

4242

NCHRP 350 TESTED


WZ - 108, WZ - 113WZ - 108, WZ - 113

CERTIFIEDCERTIFIED

CRASH WORTHY

Approved with Roll-Up andSafe Sign-350 Signs at

any height and with.080, .100 and .125 Aluminum or 5/8”

Plywood signs at 7’ bottom height

43

NCHRP 350 TESTED


WZ – 234WZ – 234

CERTIFIEDCERTIFIED

CRASH WORTHY

Super Buster Sign Stand with 48'' x 48''aluminum sign 7 feet off the ground

Super Buster Sign Stand has a powder

coated steel base and two heavy duty springs,

designed to withstand strong winds and severe wind

gusts created by passing traffic. Both the lightweight

aluminum mast and legs telescope for compact storage and site

specific adjustments.

Super Buster can accommodate a 48” x 60”

and 48” x 48” or smaller 5/8” plywood signs, or

.080, .100 and .125 aluminum, Plastic or

Roll-Up signs up to 7’ off the ground.

Super Buster also comes complete with

TrafFix Step-n-Drop leg release system found

on all TrafFix 4 legged Sign Stands. A two

position leg adjustment allows all four legs to

be individually adjusted for uneven terrain.

The built in Flag Bracket will accept standard

18” x 18” wooden dowel flags.

NEW

Maximum 141” extended leg length

Maximum 63” extended leg width-Super Buster Sign Stand with telescoping mast

and legs, which fold for compact storage

65000 Series

TrafFiff xSuper Buster SignStand

TheT

44

• Ideal for highway conditions where shoulder space islimited.

• Durable powder coated steel clamp with heavy dutyT-pins and hardened steel points.

• 12” clamp fits 5 1/2” to 12” wide Jersey-style concretebarrier wall.

• 15” clamp fits 8 1/2” to 15” wide Jersey-style concretebarrier wall.

• Available as clamp only, with Little Buster (steel) or BigBuster (aluminum) mast, springs and sign mountingbrackets.

• Barrier Buster clamp will accept most othermanufacturers dual vertical coil spring standcomponents.

• Safely displays 48” x 48” or smaller; rigid or roll-upsigns.

• Designed for quick and easy setup and removal.

• Perfect for short term applications.

12” Barrier Buster Clamp withLittle Buster Springs and Mast

Stock# 29012-LBRB

3 holes will accept Little Buster andBig Buster Springs and most other

manufacturers springs and componentsStock# 29012-S

T-pins with hardened steel points secure stand to concretebarrier wall

29000 Series

45

Portable Sign Stand Accessories

Rigid Sign Adapteronverts a TrafFix stand foorThis single spring adapter coat will accommodate aroll-up signs into a stand tha

36”x drop the custom latch36” rigid sign. Simplyign stand to lock in placee.bracket connector into the si

Three Flag Bracketree Flag BracketNow you can combine theeconomy of wood or plasticdowel flags with any sign

itstand. You can even mount issdirectly to the fiberglass crostobrace of any roll-up sign or t

the back of any rigid sign.

k Mounting BracketTruckTru

k MountingTruckket forBrac

Fix StandTrafFnts securely toMounk bed or any othertruckurface.The telflat su e-ng arm locks thescopins

d in place whiletandstak is in motion.ucktruc

TrafFix Rigid Sign Mounting Bracket

fFix SStand inTrafck MoountingTruccketBra

Sign and Stand Storage SystemBolts to truck bed or any other flatsurface to provide storage compartmenttsfor 2 stands and 2 signs, (36”x 36”or 48”x 48”). Powder coated paintprovides a durable finish to this allsteel storage system.

TrafFix Stand Carrying BagEasy to carry storage bag helpskeep the TrafFix Stand free fromoil, grease and dirt, whether onthe truck or in storage.

Sleeve-350SafeRigid Sign MountingThis Rket is NCHRP-350Brackompliant when usedcowith 36”x 36”and

848”x 48”.080 aluminumon the Econo andsignsBuster Sign Stands.Little

NEW

TrafFix Stand with rigid sign adapter

ndSign and StanmStorage System

Zephyr TrafFix

TrafFixSingleSpring

AluminumLegSingleSpring

GroundMount Tri-Buster Phoenix

BarrierBuster

EconoBuster

LittleBuster BigBuster

SuperBuster

1with

SafeSleeve-350

RigidSign

Bracket2sign

mounted

atam

inimum

5’bottomheight

3signm

ountedata

minim

um5’-7’bottom

height

*Always

consultwith

localorStateTraffic

Engineeringforappropriate

productrecomm

endations

Foruse

with

Roll-U

pSigns

◆◆

◆◆

◆◆

◆◆

◆◆

◆◆

Foruse

with

PlasticSubstrate

Signs◆

◆◆

◆◆

◆◆

Foruse

with

Rigid

Aluminum

Signs◆

◆◆

◆◆

◆◆

Foruse

with

Rigid

Wooden

Signs◆

◆◆

◆◆

Forlow

-medium

wind

speeds◆

◆◆

◆◆

◆◆

◆◆

◆◆

◆

Form

edium-high

wind

speeds◆

◆◆

◆◆

◆◆

◆

Forvery

highw

indspeeds

◆◆

◆◆

Powder

CoatedSteelConstruction

◆◆

◆◆

◆◆

◆

Aluminum

Construction◆

◆◆

Rubber

andSteelConstruction

◆◆

NCH

RP-350

approvedw

ithR

oll-Up

Signs◆

◆◆

◆◆

◆◆

◆◆

◆◆

◆

NCH

RP-350

approvedw

ithPlastic

SubstrateSigns

◆◆

◆◆

◆◆

◆

NCH

RP-350

approvedw

ith.080,

.100&

.125Alum

inumSigns

◆◆

◆◆

1◆

1◆

2◆

3

NCH

RP-350

approvedw

ithup

to5/8”

thickPlyw

oodSigns

◆◆

◆1

◆2

◆3

ZephyrSign

StandTrafFix

SignStand

TrafFixSign

Standw

ithSpring

Aluminum

LegSingle

SpringPhoenix

SignStand

Tri-BusterSign

StandG

roundM

ountSign

StandBarrier

BusterSign

StandEcono

BusterSign

StandLittle

BusterSign

StandBig

BusterSign

StandSuper

BusterSign

Stand 46

TrafFixDevices

SignStand

BuyersGuideg

47

TrafFix Stop/Slow Paddles & Flags

TrafFix 24''x 24'' Stop/Slow Paddle with 6' plastic staff is ideal for alltypes of construction projects where maximum visibility is required. Signtypes of construction projects where maximum visibility is required Signface is made from durable aluminum and is available in reflective andnon-reflective surfaces.The plastic staff with non-skid rubber end cap isdetachable for easy storage.

TrafFix Stop/Slow Paddles are made from strong,owTrafFix Stop/Slonon-corrosive material without any sharp edges.The paddle measures 18''x 18'' and features a11⁄1

4⁄⁄ '' diameter hardwood handle. Available inreflective and non-reflective surfaces.

y g gTrafFix Vinyl Warning Flags are available in 18''x 18'' or24''x 24'' sizes. All flags come with a 3⁄3

4⁄⁄ ''x 36'' hardwood dowel.

48

Standard Safety Vests come in a variety of styles and colors to meet yoursafety needs. Whether you need a high visibility, non-reflective safety vestor you need a highly reflective supervisors vest with pockets, TrafFix has thevest to suit your needs. All poncho style vests are manufactured from alightweight mesh material with Velcro closure, one size fits all. All Surveyorsvests are manufactured from a lightweight solid material that is breathableand cool in hot weather, yet durable enough for the construction industry.

Poncho Style Vests – Mesh Material, No Pockets, Velcro Closure,One size fits all

Surveyors Vests – 2 Inside Pockets, 1 Outside Pencil Pocket,Zipper Closure, Sizes M-2x for larger sizes contact Customer Service

xii Standard Vests

Mesh Non-Reflective Vest32001

Mesh Non-Reflective Vest32020

Mesh Vest w/ 3/4”Reflective Stripes

32003

Mesh Vest w/ 3/4”Reflective Stripes

32021

Mesh Vest w/ 1-1/2”Reflective Stripes

32005

Mesh Vest w/ 1-1/2”Reflective Triple Stripes

32022

Mesh Vest w/ 1- 3/8”Reflective Stripes

32007

Mesh Vest w/ 1-3/8”Reflective Stripes

32023

Surveyors Vest w/ 1-1/2”Reflective Triple Stripes

32025

Surveyors Vest w/ 1-1/2”Reflective Triple Stripes

32018

49

xii Ultra Light ANSI Vests

Class I Deluxe Vest32070

Class I Deluxe Vest32073

Class II Deluxe Vest32071

Class II Economy Vest9821

Class II Deluxe Vest32077

Class II Zebra Vest32305

Class III Economy Vest32179


Class III Supervisors Vest32164

Class III Supervisors Vest 32167

Class III Zebra Vest32311 Class E Pants, 32090 Class E Pants, 32092

Ultra Light is an extremely lightweight material that meets or exceeds the specifi-cation for ANSI/ISEA 107-2004. This lightweight material is breathable and cool inhot weather yet durable enough for the construction industry.

Economy Vests – No pockets, Velcro ClosureDeluxe Vests – 3 Inside Pockets, Velcro ClosureZebra Vests – 2 Inside Pockets, 2 Outside Pockets, Zipper ClosureSupervisor Vests – 2 Inside Pockets, 2 Outside Pockets, Zipper Closure,Sizes M – 2x for larger sizes contact Customer Service

ANSI/ISEA 107-2004

50

TrafFixii Mesh ANSI Vests



Class II Supervisors Vest32254

Class II Supervisors Vest32255





Class E Pants32094

Class E Pants32095

Our Mesh Material is a soft,lightweight fabric that meetsour exceeds thespecification for ANSI/ISEA107-2004. This lightweight,breathable material allowsair to flow through the vest,keeping it cool on hot daysyet this material is durableenough for the constructionindustry.

Economy VestsNo PocketsVelcro Closure

Supervisor’s Vests2 Inside Pockets2 Outside PocketsZipper ClosureSizes M–2x for largersizes contact CustomerService

ANSI/ISEA 107-2004

51

TrafFixii Specialty ANSI Vest & T-Shirts

Class IIFire Retardant Vest

32082

Class IIFire Retardant Vest

32083

Class II & ASTM 1506Compliant Fire & ARC

Resistant Vest9855

Class II & ASTM 1506Compliant Fire & ARC

Resistant Vest9856

Class II Premium FirstResponder Vest

Front View8730

Class II Premium FirstResponder Vest

Back View8730

Class III Police/Fire Vestw/SleevesFront View

8738

Class III Police/Fire Vestw/SleevesBack View

8738

Class II Deluxe Vestw/Silhouette Reflective

Front View32501

Class II Deluxe Vestw/Silhouette Reflective

Back View32501

Class II T-ShirtsGreen, No Pocket, 32150

Orange, No Pocket, 32155

Class II Deluxe T-Shirtw/Silhouette Reflective

32504

ANSI/ISEA 107-2004

52

fTrafFix

• Compact for easy storage on any truck, or invehicle trunk

• Light weight and compact, cones weigh lessand pack-up in a fraction of the space oftraditional highway cones

• Quickly deployed Spring Cone™ delineatestraffic at any scene

• Meets Federal M.U.T.C.D. requirements for 28”reflective highway traffic cone

• Plastic Tote holds 2 cones in less than 1 cubic foot

• 4 cone and 6 cone wire totes are available withmesh or diamond plate covering

• 10 cone utility storage box is also available

• Cone is made of a durable, bright orange, flexiblemesh material with a heavy duty rubber base

• Flexible spring allows cone to automaticallyself deploy and spill wind for increased stability

• Rubber base securely grips the road andholds cone in place in heavy traffic conditions

• Cones come in 3# and 5# models

• Cones are available with Reflexite™ ReflectiveCone Collars

Space Saving Solutions for Temporary Traffic Control

53

TrafFix Barricadaa e and Warnidd ng Lights

� The above barricade lights areavailable in Half Moon or Pyramidhead bolt.

� Packaged (10) per carton (includeswrench).

� Models 400 and 100 barricade lightsare now available with LED Circuits,increasing battery life 4 to 5 timescompared to standard incandescentbulbs.

Thhe Model 400 Barricade Light is availableModel 400 Barricade Light is availain flashing and steady burn 6 or 12 Voltn flashing and steady burn 6 or 12 Voltwith or without photo electric switch.Thelens are made from durable polycarbonateand the case is manufactured from highimpact resistant polyethylene. Available ina variety of colors.

The Y2K LED Barricade Light operates on 4 “D”2K LED Barricade Light operates on 4 “DCell Batteries and will last 4-5 times longer thantraditional 6V lantern style lights. The Y2K alsohas a 3-way switch, which makes it easy to gofrom flashing to steady burn mode to off all inthe push of a button. The sleek case design makesfor a much more compact unit that also weighsless than traditional barricade lights. Batterysaving photocell included on all Y2K lights.g p gg p g

The Econo-Light is the cost-effective solutionhe Econo-Light is the cost-effective solutioEcono-Light is the cost-effective solin barricade lights. The Econo-Light featuresn barricade lights. The Econo-Light featuran orange top case and a black bottom case.n orange top case and a black bottom casIt’s available in both 6 and 12 Volts, with orwithout photo cell and flashing or steadyburn circuits.

The Model 7800 Strobe Light has a lensM d l 7800 St b Li ht h lheight of 51/2'' and can be pipe, permanentor magnetically mounted. It’s 12 Volt powerproduces 100 candela of light. Ideal foremergency vehicles, construction equip-ment fork lifts etcment, fork lifts, etc.

g 3 ,The Dome Light Series iss is available in 3'', 4''and 6'' heights, with 360 dome. Perfect forall types of industrial applications as well asairports and barges. Available lens colorsare: Amber, Green, Red, Blue and Clear.

High intensity B-Lights come with fixed ordetachable heads. The super bright B-Lightis visible 24 hours a day. Also available inbattery saving LED models.

The Model 9290 Revolving Light comesThe Model 9290 Revolving Light comescomplete with magnetic mount and cigarettecomplete with magnetic mount and cigarettelighter adapter. Available lens colors are:Amber, Green, Red, Blue and Clear.

NEW LED B-Light utilizes (2) 6 Volt batteries. It exceedshe NTh“B” light specifications. Approximate running timepetyp

4 days with Rayovac HD batteries. The LED B-Light is24ist for school and construction zones.eatgre

00el 40Mode

2212Model 2

9290Model 9

elsMode 1102 and 11002ADomme Light D-6 and D-4

LightStrobe7800Model

Econoo-LLight

Y2Y K

54

Reflective Sheeting andTapesaa

TrafFix also can apply these rolls of pre-striped

barricade sheeting to a specially extruded roll

of flexible yet durable plastic.This roll of

barricade sheeting on plastic can be easily cut

to desired lengths and nailed or screwed to

wood panels.The reflective barricade sheeting

on plastic strips can be salvaged and reused

when the wood panels are broken.

Channelizer Drum replacement reflective sheetinng comesin 4'' and 6'' widths by 150' rolls. Available in oorange orwhite in engineer or flexible high performance shheeting.

Pressure sensitive pre-striped barricade sheeting is available in 8'' and 12'' widths in 300' rolls.i i i d b i d h i i il bl i 8'' d 12'' id h i 300' llAvailable in left or right stripes in 4'' or 6'' widths, engineer or high intensity grade reflectivity.

eNon-reflective Yellow Caution Tapewith black letters comes in 1,000'rolls. Ideal for off-road barricade

berapplications, especially with GrabbCones and Tubes.

uityHighly Reflective Vehicle ConspicuttimeeTape significantly enhances nightionvisibility of trucks and constructiolequipment. Pressure sensitive roll

is 2'' wide and 150' long. Withalternating red and silver stripes.

TrafFix Attenuator Products

• Big Sandy Barrels • Water-Wall • Scorpion Truck Mounted Attenuator• Scorpion Trailer Attenuator • Compressor Attenuator

56

Now there is an Impact

Attenuator Sand Barrel

that is easy to move and pro-

vides external verificationn of

the barrels correct weighht

of sand.

TrafFixff Big SandyImpact Attenuatoraa Sand Barrels

• Different configurations of barrels are used to create all of the weights

used in current standard array geometries (200,400,700,1400, and

2100 lbs).

• External sand weight verification is easy – just use the right

configuration barrel to obtain the correct weight.

• Sand leaking is eliminated because each sand container is one

piece – no edge seals.

• Shipping, storing, and installation is easy because there are no cone

inserts.

Optional lifting and dumping ring available-O ti l lifti d d i i il blbarrel shoulder allows for easy lifting andemptying.

NCHRP 350 TESTED


HNG-14HNG-14HMHS-CC52AHMHS-CC52A

CERTIFIEDCERTIFIED

CRASH WORTHY

48000 Series

57

The Scorpion TMA has been

tested and PASSED ALL optional

and mandatory requirements

suggested in the NCHRP-350

Report for TL-3 evaluation

criteria-for speeds up to

62.5 mph (100 km/h)The Scorpion® TMA is hydraulically powered and measures 13 feet long when fully extended, making it ideal forstationary and mobile construction zones.

Scorpion Truck Mounted Attenuator (TMA)

The Scorpion is a Truck MountedAttenuator (TMA) that is truly “different bydesign”

The Scorpion TMA consists of strut and car-tridge sections that are linked together on asupport frame. The curved side rails aremade from corrosion resistant aluminumtubes, which offer full width impact protec-tion along the entire length of the TMA. Theside rails were designed to re-direct errantvehicles away from the rear of the truck (cof-fin corner). Other manufacturers TMA mod-els have little or no side-angle impactprotection.

The aluminum boxes are filled with a mois-ture proof, aluminum honeycomb material.The boxes, together with the curved side rails,absorb the energy from an impacting vehicle.

The aluminum boxes are painted with abright yellow powder-coated finish, forlasting durability.

The Scorpion TMA and message panel in the storage or transportposition.

Notice how the messagepanel is securely mountedbetween the body of thetruck and the ScorpionTMA, for added safetyand convenience.

The Scorpion TMA is fully extended, with the changeable message panel in the travelor storage position.

NCHRP 350 TESTED


HSA-CC-65HSA-CC-65

CERTIFIEDCERTIFIED

CRASH WORTHY

58

Versatility and Flexibility–TrafFix DevicesOffers Three Different Scorpion TMA Models

MODEL AThe Scorpion TMA Model A utilizes only the cartridge section providing impact protectionup to 45 mph (70 km/h). It incorporates a modular design, which can be upgraded toa Model B or Model C (to meet NCHRP-350, TL-3 requirements), by simply adding thestrut section.

MODEL BThe Scorpion TMA Model B folds just past the90-degree position (when folding over the truckbed is not desired). This feature allows for easytransit in the upright position. The rear strut israised 10-degrees for added mobility and groundclearance, making it ideal for safely clearing exitramps, driveways and other inclined surfaces inthe stored or travel position. The Scorpion TMAModel B provides impact protection up to 62.5mph (100 km/h).

MODEL CThe Scorpion TMA Model C folds over the bed offlat bed, stake bed or dump trucks. The Model Cwith its compact design and balanced weightdistribution makes it ideal for high-speed travel.The Scorpion TMA Model C provides impactprotection up to 62.5 mph (100 km/h). Sidemounts are also available.

SPECIFICATIONSMODEL A(NCHRP-350, TL-2)Weight 760 lbs. (346 kgs.)Length (from back of vehicle)Travel/Storage 3’ (1 m)Deployed 8’ 8” (2.65 m)

Width 8’ (2.45 m)Height (from ground)Travel/Storage 11’ (3.35 m)Deployed (ground clearance) 1’ (.3 m)

Tests Successfully Passed2-50, 2-51

MODEL B(NCHRP-350, TL-3)Weight 1,975 lbs. (900 kgs.)Length (from back of vehicle)Travel/Storage 7’ 9” (2.3m)Deployed 13’ 10” (4.21 m)

Width 8’ (2.45 m)Height (from ground)Travel/Storage 12’ (3.65 m)Deployed (ground clearance) 1’ (.3m)

Tests Successfully Passed*3-50, 3-51, 3-52, 3-53

MODEL C(NCHRP-350, TL-3)Weight 1,975 lbs. (900 kgs.)Length (from back of vehicle)Travel/Storage 2’ 5” (.74 m)Deployed 13’ 10” (4.21 m)

Width 8’ (2.45 m)Height (from ground)Travel/Storage 10’ 6” (3.05 m)Deployed (ground clearance) 1’ (.3m)

Tests Successfully Passed*3-50, 3-51, 3-52, 3-53

*TrafFix Devices’ Scorpion TMA has been testedand also PASSED a “worse case” side anglere-directive impact test, that goes beyondall governmental testing requirements.Full details are available upon request.

10000 Series

59

(Figure 1) Car beginning to hit Scorpion TMA.

(Figure 2) Car impacting at 62.5 mph (100 km/h).

(Figure 1) Pick-up truck beginning to hit Scorpion TMA.

(Figure 2) Pick-up truck at mid impact.

(Figure 3) Pick-up truck impacting at 62.5 mph (100 km/h).

Upon impact, the Scorpion TMA crushes in progressivestages. When hit by a lighter vehicle weighingapproximately 1,807 lbs., or (820 k.g.), traveling at speedsup to 62.5 mph (100 km/h), the impact will crush the car-tridge section of the Scorpion. When hit by a heavier vehi-cle, such as a pick-up truck or SUV weighing approximately4,409 lbs., or (2,000 k.g.), traveling at speeds up to 62.5mph (100 km/h), both the strut and cartridge sections willcrush, absorbing the energy from the impact.

Incidental damage sometimes occurs during backing-up orturning corners. With Scorpion’s modular design and con-struction, only the portions of the TMA that are damagedneed to be replaced.

Scorpion’s Modular Design-Creates anUnbeatable Standard of Performance

Features• NCHRP 350 tested and accepted for all mandatory and optional offset and angled impacts

• Only Trailer Attenuator to be tested and accepted with a 10,000 lb host vehicle

• Infinite weight tested and accepted allows the Scorpion Trailer to be used on heavy host vehicles with noupper weight limit

• Single point attachment to standard 20 ToTT n (minimum) rated pintle hook is quick and easy

• TeTT lescoping Anti-Rotational System (TATT RS™) minimizes Scorpion Trailer rotation during angled andoffset impacts, preventing trailer separation from host vehicle

• Requires little or no modification or additional mounting hardware to host vehicle

• The Scorpion’s proven modular design crushes in progressive stages allowing quick and economicalreplacement of damaged parts

• The unique curved design gives full width protection to the back of the host vehicle and protects the“coffin corners” of the truck

• Rear axle placement improves trailer stability and prevents the tail from “bottoming out” on driveways oruneven surfaces

• Optional Arrow or Message Board can easily be attached to Scorpion Trailer Attenuator

60

®

Scorprr ion® TL-3 (62.5 mph or 100 kph) TrTT ailer Attenuator

NCHRP 350 TESTED


HSSD/CC-65BHSSD/CC-65B

CERTIFIEDCERTIFIED

CRASH WORTHY

Scorprr ion®® TrTT ailer AtAA tenuator

The Scorpion Trailer attaches directly to the pintle hook. It does notrequire ad

ppditional installation, or truck

ymodif

ppiff cation, beyond

standard faff ctoryrr installed pintle hook and 1/2// ” steel frff ame plate.

Pre-Impact Condition Post-Impact Condition

Upon impact, two heavaa yvv duty anti-rotation arms are drivenagainst th

pe frff ame plate, preventing angular rotation of the

Scorpion Trailer dpuring an accident.

Telescoping Anti-Rotation System (TARS™)

Beginii ninii g of imii pm act MiMM dii -dd p- oinii t of imii pm act EnEE d of imii pm act

TL - 3; 3-53 Offset Angled TeTT st — 4,500 lb vehicle impacts 20,000 lb host vehicle at 62.5 mph (100 kph)

Scorpion®Trailer Attenuator

10002 Series

Beginii ninii g of imii pm act MiMM dii -dd p- oinii t of imii pm act EnEE d of imii pm act

TL - 3; 3-51m Inline TeTT st — 4,500 lb vehicle impacts 10,000 lb host vehicle at 62.5 mph (100 kph)

AAnttii-RRRotation Arms

2

3

4

5

111. SStteeeell ttoonngguuee sseeccttiioonn iinncclluuddiinngg TTAATTT RS™2. AlAA uminum strut section3. AlAA uminum cartridge section4. AxAA le wheel assembly5. Curvrr ed re-directing aluminum tuubes

SpecificationsTL2 TL3-STD TL3-Euro

• Lengtgg h 13’ 0” (3.96m) 17’ 10” (5.44m) 17’ 10” (5.44m))• WiWW dtdd h 96” (2.44m) 96” (2.44m) 96” (2.44m)• Heighthh 36” (.91m) 36” (.91m) 36” (.91m)• WeWW ighthh 1240 lbs (562kg) 1730 lbs (785kg) 1541lb (700kg))

61

62

Compressor™ r AttenuatorNew for 2008

Features• Passed all required NCHRP 350 TL -3 Tests – FHWA Acceptance Letter HSSD/CC-95

• Compressor is a self restoring attenuator designed to take repeated impacts with minimal or no repairs

* After any impact the system should be thoroughly inspected for damage or maintenance issues

• Overall length 21’ 3” – Attenuator Module/Effective length 16’ 6”

• Delivered assembled and ready to install – eliminates on-site assembly

• Corrosion resistant solid steel Uni-Base™ requires only 14 bolts to secure Compressor to the road

• Compressor’s assembled design combined with the Uni-Base™ construction makes job site installation fast, easy and safe – one crew can safely install several units in one day

• Compressor’s specially formulated attenuator modules are injection molded from HDPE plastic and are designed to more efficiently absorb energy in a shorter distance

• Attenuator modules are pre-flattened to provide more consistent results after repeated impacts

• Compressor’s telescoping ultra high strength steel side panels re-direct side impacts with minimal damage to attenuator modules or panels

NCHRP 350 TESTED


HSSD/CC-95HSSD/CC-95

CERTIFIEDCERTIFIED

CRASH WORTHY

63

© Copyright January, 2007 TrafFix Devices, Inc. TrafFix® and Compressor™ are trademarks of TrafFix Devices, Inc. U.S. & International Patents Pending

Direction of

Impact

Compressor™r AttenuatorSpecifications

Features• Durable polyethylene plastic minimizes cracking and breaking

• Molded through forklift holes eliminate bowing when filled with water

• Double wall knuckle design minimizes breakage at hinge points

• Hinge design allows for a 30-degree pivot between sections

• Large 8" fill hole speeds filling process, includes twist-lock plastic cap

• New tamper resistant, corner offset drain plug with coarse buttress thread — screws in or out in

only 2 1/2 turns

• Includes one steel connection pin that allows sections to be locked together

• Forklift and pallet jack through holes and recesses for easy movement

• Standard colors are orange/red or white — additional colors available upon request

• Will accept plastic or chain-link fence (with extended connection pins)

TrafFix Water-Wall™

NCHRP 350 TESTED


HSA-10/B-130HSA-10/B-130WZ-224WZ-224

CERTIFIED CERTIFIED

CRASH WORTHY

64

45032 Series

SpecificationsLength 6'Height 32"Width 18"Weight (empty) 80 lbsWeight (filled w/water) 1,110 lbsMaterial Linear Low Density

PolyethyleneColor Orange/Red or White

NCHRP 350 Approved As:TL-1 Longitudinal Barrier – HSA-10/B-130TL-2 Longitudinal Barricade – HSA-10/WZ-224TL-3 Barricade – HSA-10/WZ-224

30-degree pivoting hinge design allows the TrafFix Water-Wall to handle curved roads.

The TrafFix Water-Wall used as a Longitudinal Barricade along a job site.

Water-Wall with extended connection pins and plastic fence. Water-Wall stacks for storage and transportation.

Water-Wall can be easily lifted and placed using all b l l f d d l dforklift or pallet jack.

Water-Wall can pivot 30-degrees and belocked together with steel connection pins.

New tamper resistant, corner offset drain plugN t p i t t ff t d i plwith coarse buttress thread — screws in or outin only 2 1/2 turns.

Large 8” fill hole speeds filling process, includestwist-lock plastic cap.

TrafFix Water-Wall™ Features

65

45032 Series

© Coppyright October, 2007 TrafFix Devices, Inc.TrafFixx®® and Scorpionand Scorpion®® are trademarks of TrafFix Devices, Inc. U.S. Patent Numbers 6,024341 and 6,581,992 B1 Licensed Under U.S. Patents 6,092,949 and 6481,920are trademarks of TrafFix Devices Inc U S Patent Numbers 6 024341 and 6 581 992 B1 Licensed Under U S Patents 6 092 949 and 6481 920

TrafFix® and Water-Wall™ are trademarks of TrafFix Devices, Inc. U.S. patents pending

© Copyright November, 2003 TrafFix Devices, Inc.TRAFFIX, SAN-FIL, Step-n-Drop, Zephyr, Grabber-Cone and Grabber-Tube are registered trademarks of TrafFix Devices, Inc.EZ-Up, Little Buster and Grabber Vertical Panel Barricades are trademarks of TrafFix Devices, Inc.The products illustrated or described in this catalog are covered by the following U.S. Patent Numbers:309,585; 327,658; 4,980,984; 5,026,204; 5,201,599; 5,446,984, 5,540,007, 5,560,732; 5,611,509; 5,624,092; 5,732,911.Other U.S. and international patents pending.

160 Avenida La Pata, San Clemente, CA 92673(949) 361-5663 FAX (949) 361-9205

www.traffixdevices.com

TrafFixDevices Inc.

We accept Visa, MasterCard and American Express

Distributed By:

07/2009

Documents

Product Guide - TrafFix Devices...Tra fFix 100% recycled rubber base is the “sandless” way to balllast channelizer drums. Therubber base “grips the road”and minimizes drum