Product Guide - RTL · Permanent speed limit or RCA designated operating speed (km/h) ≤50 60 70 80 90 100 Traffic signs A Sign visibility distance (m) 50 60 70 80 90 100

www.rtl.co.nz 0800 785 744

Product Guide

Our Core Values & Quality Assurance 2-3

Temporary Warning Site Layouts 4-5

Reflective Sheeting Guide 6

Temporary Warning Signs & Stands 7-12

Traffic Management 13-15

Road Safety Products 16

Car Park Solutions 17

Permanent Warning Signs & School Zone Signs 18-22

Pedestrian & Cycle Safety 23

Regulatory & Parking Signs 24-28

Outdoor Recreational Symbols & General Information Signs 29

Advisory Signs 30

School Safety & Transport 31

Service & Tourist Signs 32

Sign Support & Marking Systems 33

Signfix Support & Fixing Systems 34

Sign Mounting 35-37

Sign Cleaning 38

Contents Page

Harding Traffic

Car Parks 39

Inductive LED Lighting & LED Signage 40

LED Signage 41

CONTENTS PAGE

Page 1

RTL manufactured its first traffic sign over 30 years ago. Since then we have grown to become a leading and

trusted supplier to our industry. RTL is dedicated to providing customers with “quality products on time, every

time”. With this commitment in mind, RTL has manufacturing and distribution across the country with branches

in Auckland, Wellington, Christchurch & Invercargill.

Our staff are our greatest resource, committed to our industry, and producing and selling quality products.

RTL has the specialist skills and equipment to be able to offer original concept artwork and design, commercial

and custom made sign frames and support systems. RTL also holds exclusive distribution agencies for many of the

world’s leading Road Safety product suppliers.

Whatever your Traffic Control or Road Safety needs, RTL provides them on time, every time with compliant, top

quality products at competitive prices.

Putting CUSTOMERS first

Consistently HIGH QUALITY products

SUPPORTING our people

PARTNERING with our customers and suppliers

Keeping our people SAFE at work

INNOVATION through continuous improvement and development

Shane MurrayTechnical Services

OUR CORE VALUES

Page 2

Our Core Values

RTL prides itself in providing quality signs and guarantees all of its products against defects in material and workmanship at the time of delivery.

If any RTL product is defective at the time of delivery, and provided the defect or damage is attributable solely to RTL it will, at its discretion, repair or replace that product without charge, including freight within New Zealand.

The obligations of RTL under this guarantee are limited to the repair or the replacement of the product and do not extend to any consequential loss or damage. It is for the purchaser to specify correctly to RTL the choice of copy, finish, material or colour and also for the purchaser to satisfy itself as to the quality, and/or fitness for purpose of the particular product. All statutory and other warranties are hereby excluded.

The installation, location or use of any products supplied by RTL shall be the sole responsibility of the purchaser.

Free Phone: 0800 785 744 Free Fax: 0800 804 444 Email: [email protected]

Auckland

Wellington

Christchurch

Invercargill

Branch:

31 Maurice Road, Penrose

Unit D3, 59-61 Marsden Street, Lower Hutt

8a Cable Street, Sockburn

88 Bill Richardson Drive, Avenal

Address:

Ph: 09 259 2600

Ph: 04 232 3774

Ph: 03 336 0086

Ph: 03 211 0300

Number:

Shane MurrayTechnical Services

RTL has a proven Quality Assurance Management System in place.

- Customers are assured that Total Quality Management Systems are in place throughout the company

- Continuous Improvement is built into every procedure and process at RTL

- Compliance and regulatory affairs is top of mind at RTL

- Customers can rely on us for up-to-date compliance information

- Customers can be assured that all products are quality controlled to a high level of specification

The information contained in this Diary / Product Guide is provided using the current information and reference material from CoPTTM and NZTA - TCD Rule specifications. Whilst every endeavor has been made to show all current information we also recommend that you should check the NZTA website for sizes, codes, and specifications as they may have changed since this document was sent to print.

QUALITY ASSURANCE

Page 3

Our Branches

Guarantee

ISO 9001

Permanent speed limit or RCA designated operating speed (km/h) ≤50 60 70 80 90 100

Traffic signs

A Sign visibility distance (m) 50 60 70 80 90 100

B Warning distance (m) 50 or 30* 80 105 120 135 150

C Sign spacing (m) 25 or 15* 40 50 60 70 75K

Safety zones

D Longitudinal (m)+ 10 or 5* 15 30 45 55 60

E Lateral (m)+ 1 1 1 1 1 1

Lateral behind barrier installation As specified by the Installation Designer

Tapers

G Taper length (m)# 30 50 70 80 90 100

G LV roads taper length (m)# 25 30 35 40 45 50

K Distance between tapers (m) 40 50 70 80 90 100

Delineation devices

Cone spacing in taper (m) 2.5 2.5 5 5 5 5

Cone spacing: Working space (m)## 5 5 10 10 10 10

Lane widths

Speed (km/h) 30 40 50 60 70 80 90 100

F Lane width (m) 2.75 2.75 3.0 3.0 3.25 3.25 3.5 3.5

Except for delineation device spacings, which are maximum values, the distances specified in the above tables are minimum values.

LV/low-risk roads (less than 250vpd - less than 20 vehicles per hour)When on the shoulder:• If CSD not available: Advance warning sign and base to be installed with sign visibility distance and warning distance in place• If CSD available: Advance warning sign may be attached to the rear of a work vehicle which has an amber flashing beacon(s) and is visible to approaching road users from the rear.

When the activity encroaches onto a live lane consider alternating flow controls.If the above requirements cannot be achieved, the operation must be modified to comply with the appropriate level LV or level 1 requirements.

* Larger minimum distances apply on all state highways and also on all multi-lane roads. The smaller minimum distances may be applied on the other roads to accommodate road environment constraints.

+ On LV roads the longitudinal and lateral safety zones may be reduced, or eliminated, in order to retain a single lane width. Positive traffic management and an appropriate TSL must be used.

# On non-state highways with speeds 50km/h or less, a 10m taper (with cones at 1m centres) may be used when there are road environment constraints (eg intersections and commercial accesses). On all roads where shoulder width is less than 2.5m and the activity does not affect the live lane, a 10m shoulder taper is permitted (with at least 5 cones at no greater than 2.5m centres). A taper of 30m (with cones at 2.5m centres) must be used where manual traffic control (stop/go), portable traffic signals or priority give way are employed.

## LV roads: double the cone spacing alongside working space (eg 5 = 10, 10 = 20).

TW SITE LAYOUTS

Page 4

TW Site Layout Distance for Level LV & Level 1 Roads

Permanent/TSL (km/h) ≤50 60 70 80 90 100/110

Traffic signs

A Sign visibility distance (m) 60/50+ 70/60+ 80 100 120 120

B Warning distance (m) 100/75+ 120/90+ 140 160 200 200

C Sign spacing (m) 50/35+ 60/45+ 70 80 100 100

Safety zones

D Longitudinal (m)* 15 20 30 45 60 60

E Lateral (m)

1.Behind cones 1 1 1 1 1 1

2.Behind barrier installations As specified by the Installation Designer

Tapers

H Initial taper length per lane (m)** 90/50+ 100/60+ 120 150 180 180

I Subsequent taper length per lane (m) 50 60 70 80 100 100

K Minimum distance between tapers (m) 50 60 70 80 100 100

Delineation devices

Spac

ing

(cen

tres

)

All tapers (m) 2.5 2.5 2.5 2.5 2.5 2.5

Cones parallel to the lane (eg between tapers and alongside the working space) (m) 5 5 10 10 10 10

At merge and diverge points for ramps and slip lanes, intersecting road entry and exit points, and worksite access points

2.5m for 10m either side of a change in alignment 2.5m for 20m either side of a change in alignment

Lane widths

Speed (km/h) 30 40 50 60 70 80 90 100/110

F Lane width (m) 2.75 2.75 3.0 3.0 3.25 3.25 3.5 3.5

* A longitudinal safety zone is not required when a barrier completely protects the approach end of the worksite.

** Taper length is based on a single lane shift of 3.5m.

+ The longer distance is the desirable distance, the shorter distance is the minimum distance required. The longer distances must be used wherever possible. The shorter distances may only be used where there are road environment constraints.

Except for delineation device spacings, which are maximum values, the distances specified in the above tables are minimum values.

Approach sign distances and spacings, the initial taper(s) and any longitudinal safety zone associated with that taper must be based on the permanent speed limit. The layout distances of the remainder of the worksite, including any subsequent tapers, may be based on the TSL, provided the TSL is applied prior to the first taper.

Site Layout Distance for Level 3 Roads - refer CoPTTM 4 - Section C

TW SITE LAYOUTS

Page 5

Distances for Level 2 Roads

Sheeting Name and Details Face Pattern Usage Guidelines & Service Life

Engineer Grade - EG T-1500 EG Series AS/NZS 1906.1:2007ASTM Type I

No face pattern. Lowest cost reflective sheeting specified for use in traffic applications. Parking signs. Outdoor recreation signs. Service life exceeds 7 years.

High Intensity Prismatic - HIP T-6500 HIP Series AS/NZS 1906.1:2007ASTM Type Ill and ASTM Type IV

Hexagonal (honeycomb) Pattern with “HIP” watermark and pre-printed lot number identification (eg. 3C24YP001) on the face film for tracking and authentication.

Excellent value grade of prismatic reflective sheeting. Used for most permanent traffic signs. Service life exceeds 10 years when combined with Avery Dennison OL-2000 Series transparent coloured films.

OmniCube T-11500 OmniCube SeriesAS/NZS 1906.1:2007ASTM TypeXI

Hexagonal (honeycomb) Pattern with watermark and pre-printed lot number identification (eg. 3C24VP001) on the face film for tracking and authentication.

Highest grade of prismatic reflective sheeting. Full cube prisms are nearly 100% efficient in returning light back to the driver, using intelligent cube technology.

It is the perfect choice for high reflectivity at both long and short distances and it has a wide viewing angle.

Service life exceeds 12 years when combined with Avery Dennison OL-2000 series transparent coloured films.

Certified Authorised Converter

Jonathan LauluAuckland Production

The colours below represent the different reflective sheeting used in our Temporary Warning sign range.

Fluorescent Orangeeg T1A

HIP Orangeeg TL96

HIP Whiteeg T1B

REFLECTIVE SHEETING GUIDE

Page 6

TCD CodeMOTSAM

Please refer to the latest edition of the TCD Rule and CoPTTM for sign specifications - www.nzta.govt.nz

Standard Sign Sizes - Level 1 Standard Sign Sizes - Level 2/3

Also available withbacking board and

in:- 1km, 3km & 4km

1200 x 1800 1200 x 600

Variation: 2km

750 x 750

1 linesupplementary

900 x 300

2 linesupplementary

900 x 450

1 linesupplementary

1200 x 450

2 linesupplementary

1200 x 6001200 x 1200

2400 x 1800

20km to 80kmVariations:

Right

TW-1A

TW-1.3

TW-1.7

TW-25

TW-1.4

TW-1.8

TW-26

TW-1.5

TW-1B.1.1

TW-27

TW-1.3

TW-1B.1.1(Alt)

TW-34 TW-34 with RG-17 or 34

TW-1.3

TW-1B2.1

TW-1.6

TW-1B3

TW-1B TW-1.1 TW1-2.1 TW-1.2.2 TW-1.3

Pass with CareTV1 TV2 TV3 TV4

T133 T134 T135 T136 T137 T138

T139 T140 T141 T142 T143 T144

T1A T1B T121 T131 T132T145

Pass with Care

TEMPORARY WARNING SIGNS

Page 7

TV Temporary - Vehicle Mounted

T1 Temporary - Road Worker

Sign Code:


TemporaryBus Stop Signs

750 x 750

1 linesupplementary

900 x 300

2 linesupplementary

900 x 450

1 linesupplementary

1200 x 450

2 linesupplementary

1200 x 6001200 x 1200

Quickly identify your gear on site - talk to us about our Sign Branding Service.

Please refer to NZTA CoPTTM for logo specifications.

TW-2A TW-2.5

TW-2.6 TW-2.7 TW-2.8 TW-2.9 TW-2.10 TW-2.11

TW-2.13.2

TW-6A TW-6B TW-6.1BTW-6.1A

TW-2.13.3

TW-2.16.1 TW-2.16.2 TW-2.16.3 - - -

TW-2.12

TW-2.14 TW-2.15 TW-2.17 TW-2.18 TW-2.13.1

TW-2.1TW-2B TW-2.2 TW-2.3 TW-2.4

T2A T211 T212 T213T2B T214 T215

T216 T217 T218 T219 T220 T221 T222

T223 T224 T225 T226 T227 T228 T229

T230 T231 T232 T233 T234 T236

TF1 TF2


Page 8

T2 - Temporary - Hazard Warning

TF Temporary - Fauna / Animals Sign Branding


750 x 750

1 linesupplementary

900 x 300

2 linesupplementary

900 x 450

1 linesupplementary

1200 x 450

2 linesupplementary

1200 x 6001200 x 1200

Size: 1500 x 1200 Size: 1500 x 1200

Left

Variations:100m200m

300m400m

Left

Right: TL2R Right: TL33 Right: TL32

Right

TW-7 TW-8.1

TW-13 TW-13

TW-3A

TW-5A TW-5B TW-5.1 TW-5.2 TW-36A TW-36B

TW-3B TW-4A TW-4B TW-4.1 -

TW-13.1 TW-13 TW-35A TW-35B

-TW-9 TW-10 TW-11 TW-12

TW-7.1 TW-7.1.1 TW-7.2 TW-8

TL2L TL3L TL31 TL4L TL5L TL6L

TL71 TL72 TL81 TL82

TL9L TL9R TL9B TL9S TL1A TL1B

TLS

TR1LA TR1LB TR2A TR2B TR21 -

TR3A TR3B TR31 TR32 TR4A TR4B


Page 9

TL Temporary - Lane use / Management

TR Temporary - Road Surface

Left hand version shownRight hand version available


TCD CodeMOTSAM

Sign Code:

Standard Sign Sizes

Detour DirectionLevel 1: 900 x 300

Level 2: 1200 x 450

Detour EndsLevel 1: 900 x 450

Level 2: 1200 x 600 Level 1: 1000 x 750 Level 2: 1500 x 1200 325 x 325 x 325 1200 x 1200

Stop Go Please specify if SLOW

Variation: 200m Variation: 200m

Straight LH

Veer Left

Turn Right

Straight RH

Turn Left

Veer Right

TW-20 TW-20.1

-

TW-21 TW-21 TW-21 TW-21

TW-22 Detour Direction

TW-23

TW-33 TW-33 -

TW-28 TW-28 TW-29 TW-29 -

TD1

TD3E

TZ1L TZ1R TZ2L TZ2R TZ3

TD5

RP4 RP41 RP42

TD2 TD3A TD3B TD3C

TDB5 TDC5 TDD5

TDB6 TDC6 TDD6

TDB2 TDC2 TDD2

TDB4 TDC4 TDD4

TDB1 TDC1 TDD1

TDA5

TDA6

TDA2

TDA4

TDA1

TDA3 TDB3 TDC3 TDD3

TD3D


Page 10

TD Temporary - Detour

TZ Temporary - MiscellaneousConcrete Barrier

Delineators

Right showingLeft available

MD17 01

Speed limits Keep Left / Right Road ClosedSingle Lane Give way Single Lane Priority No Left Turn

RG-17750 or 1200

750 or 1200 RG-7 No Right also available

RG-4


750 x 750

1 linesupplementary

900 x 300

1200 x 800 1200 x 800

2 linesupplementary

900 x 450

2 linesupplementary

900 x 450

1 linesupplementary

1200 x 4501200 x 1200

2 linesupplementary

1200 x 600

RG-16RG-19

RG-19.1

RG-20 RG-8

TW-30

TW-32

RG-4S TW-16

TW-14A TW-14B TW-15A TW-15BTW-18 TW-18

TW-17 TW-16/17 TW-19 TW-24.1 TW-24.1

TW-31

TW-32

TW-32

TW-32

TW-32

TW-32

TW-32

TW-32

TW-32

TW-32

TW-32

TW-32

TU1

TU36

TG1

TA1 TA1 TA2 TA21 TA2 TA21

TG2 TG31 TG32 TG4 TG51 TG52

TU41 TU42 TU43 TU44 TU45 TU46

TU2 TU31 TU32 TU33 TU34 TU35


Page 11

TU Temporary - Users, Non - Motorised

TG Temporary - General Supplementary

TA Temporary - Advance Warning of TCD

Other Temporary Work Zone Signs Left hand version shownRight hand version available

TCD CodeMOTSAM

Sign Code:

MINI KWIK-LOKTM

MKL Mini Kwik-LokTM

Features:- One Sign support fits all- Fast and efficient sign changing- Double, single sided or half height stands- Streamlined- Lockable- Lightweight and user friendly

- Panel storage rack and accessories available- Alternative sign substrate options available

750 Series TW SystemLevel One

Specifications:Length: 3000mmWidth: 225mmWeight: 16.3kg

1 Line Supplementary2 Line Supplementary

Kwik-LokTS18

Temporary Speed Hump

TS17

1200 Series TW System

Level 2/3 Base Range

Fixed BaseTS02

Spider Base (Collapsible)

Level 2/3

Flexi-LiteTM Signs

TO45

A simple, easy to use solution that can be set up in an instant to warn motorists that you are working on the road.

Comes with adjustable straps and a bungy cord to suit different vehicle types, from a car to a van!

TF27

Kwik-Lok

Our Flexi-LiteTM Range is an easyto use, light weight, highly portable alternative to aluminium signage. It is a versatile, compact system that can be set up in an instant.

Temporary Speed Humps are designed to reduce speeds in: - Temporary Work zones- In Emergency Situations- At Special Events

Features:- Extremely versatile- Simple to assemble- Wide range of sign options- Highly visible- Wind resistant- Easy to clean

NZTA CoPTTM CompliantASNZ 1906 Compliant CoPTTM C.10.16 Compliant

MKL Driveable Stakes

DriveableStakes c/wHandle

32mm & 35mm

35mm FlatDriveableStakes

TS12

TEMPORARY WARNING STANDS

Page 12

HKL Kwik-Lok TMFlexi-LiteTM Car kit System

Flexi-LiteTM Car kit System

Mini Kwik-Lok TM

Ver-mac VMS is the NZTA's preferred VMS for the New Zealand network.

Trailer models include 1500C (Extra Large), 1232 (Large), 320X (Medium) & 548 (Small). Optional extras include radar and data logger, cameras, Braked & Stealth Upgrades (for thefull range) and Full RGB Screens. The 320X VMS is our most popular variable message sign. It has a compact design for use where space is limited. The 320X VMS comes braked and has Stealth Technology to prevent battery theft.

MPB Portable Traffic Lights (PTLS) have been successfully used in New Zealand for over 20 years. With three models to choose from, the MPB 3200, 3400 & the 4000, MPB lights are easy to operate and fully compliant to NZTA specifications.

MPB Lights are equipped with directional radar detectors to detect vehicles, eliminating the need for manual traffic control. The signal system is easy to operate and can be programmed in just a few steps using the control panel, without the user needing extensive prior knowledge.

- Traffic Management- Project & Work Zone Updates- Event Management- Emergency & Safety Alerts

- Interactive list and GPS map view of all your equipment with active status- Receive automated e-mail alerts & updates- Display a message to 1 or many signs at once- Message library- Advanced Message editor & scheduling- Create your own graphics or logo

- Road works & closures- Queue Management- Advance Warning- Speed Feedback & Data Collection

Applications:

PCMS 320X - MediumRemotely monitor, maintain and manage your traffic control equipment from any PC, laptop, tablet or smartphone!

- Simple to setup & programme- Multiple traffic configurations- LED lamps automatic dimming

- Emergency quartz back up- Audio Warning Alarm- Customised programming

Features (varies by model):

Features:

TRAFFIC MANAGEMENT

Page 13

NZTA Compliant Portable Traffic Lights Also available for HIREEx: Auckland Branch PH: 0800 785 744

Ver-mac® Variable Message Signs - Fully CoPTTM Compliant

JamLogic Fleet Management Software

Scorpion Attenuators are designed with Saving Lives top of Mind.

RTL is the proud supplier of the TrafFix range of Scorpion II TL-3 MASH compliant Truck Mounted Attenuators (TMAs) and a Trailer Attenuator (TA). With our experience and knowledge in the NZ market and backed by our US Supplier TrafFix, you can confidently choose our attenuators for your shadow vehicles. Our product range includes:

C-90 TMA:

Model C TMA:

Trailer (TA):

The C-90 is stored in the vertical position and deploys in one movement. The C-90 has the shortest overall length in the market

The Model C is stored in the folded position. It is a compact, low profile design ideal for high-speed travel on motorways & highways. Available with or without the high reach extension (shown)

The main benefit of the TA is that it quickly attaches and detaches from the support vehicle, allowing you to maximum the use of your fleet

Retrofit Cover(Before Upgrade)

Upgraded LAS Unit

Indicative Design Only

Features:- 12/24v dual voltage- Push button controller- Automatic / manual Brightness control- Powder coated black aluminium housing- Low voltage battery indicator

Features:- Wireless touch screen controller- Galvanised steel frame- Independently powered- Automatic & manual brightness control

- Xenon lights comply with EN: 12352:2006- Pre-programmed with approved symbols- Complies to European Standard EN 12966-1- Ute or trailer mounted options available

All Products comply to NZTA CoPTTM Requirements

LAS with Prism Technology:

Light Arrow Systems fulfill a critical role on Level 2/3 State Highways. RTL’s Light Arrow System with PrismXP Technology is built to last and is easy to operate.

Our 25 Light LED Arrow Boards are used extensively on Level One roads in both mobile and static operations. They are simple to install, easy to operate and are fully compliant to NZTA CoPTTM specifications.

Now supplied with an innovative Mid Hinge frame, our AWVMS is a compact, low profile design ideal for high-speed travel on motorways & highways. It is fully compliant to NZTA CoPTTM Specifications and European Standard EN12966.

The Mid Hinge Frame is stored in the folded position and folds up to 90° when in use. It can be bolted onto the deck of a ute or trailer. RTL offer a number of upgrades, including the Quick Release/ Quick Connect System, 12V Dual Charging System Kit, Extended Battery Duration Kit and a 12V Conversion Kit.

MASH Scorpion II TMA deployed

MASH Scorpion II Trailer Attenuator (TA)

LAS LED Retrofit Upgrade Package:

Retrofit Covers installed on older LAS (that partially cover the down arrow) may only be used until December 2020. Our LED Upgrade Package is an economical solution to bring those units back up to compliance.

Talk to us about upgrading your TM Trucks!

TRAFFIC MANAGEMENT

Page 14

Mid Hinge Advance Warning Variable Message Sign (AWVMS)

Light Arrow System (LAS) 25 Light LED Arrow Board

Scorpion II MASH Compliant Attenuators

TB 16

The TrafFix Water-Cable Barrier™ provides positive work zone protection on low speed roads (50km & 70km). It is a MASH approved (TL-1 & TL-2) temporary crash barrier used in conjunction with the TrafFix SLED Mini™ End Treatment.

EZI-Set Barricade D-Fence Barriers Portabarriers

No StoppingCone Sleeves

Heavy Duty PVCYellow Cone cover

Standard Slim Profile

TO15

L = 2400mm x H = 1200mm - 15kg L = 2000mm x H = 1200mm

Shown with Barricade Tape Hinged Model

L = 1950mm x H = 1000mm - 35kg L = 1980mm x H = 1000mm - 25kg

STMS available upon request

- TTMC-W Compliant- Sizes: S - 3XL (Other sizes available)

Side One:Keep LeftTCD: RD6LRG-17.1

RG-34.1

Flip Over:Keep RightTCD: RD6R

TV27

The Sentry II™ Water Cable Barrier provides positive work zone protection on high speed roads (100 km). It is a MASH approved (TL-3) used in conjunction with the TrafFix SLEDTM (US) End Treatment.

Specifications*:Length: 1900mm (pin to pin)Width: 570mmHeight: 1200mm

* Source: FHWA B-279 Approval Letter

TL-1 & TL-2 MASH Tested & Passed

Specifications:Weight: 45kg (empty)Weight: 485kg (full)

SLED US™ by TrafFix Devices, is a MASH Approved End Treatment for higher speed zone applications (up to 100km).

Euro SLED™ also available (up to 110km/hr)

SLED Mini™ by TrafFix Devices, is a MASH Approved End Treatment for lower speed zone applications (50km and 70km).

The Big Sandy is a MASH approved Crash Cushion / End Treatment filled with sand - hence the name Big Sandy. Barrels are available in three sizes.

Big Sandy Barrels are suitable for a wide range of speed zones up to 110 km/hr. Different configurations & barrel sizes are specified for different speed zones.

Barrel sizes include the 90-320 kg640 kg & 960 kg.

Sold in packs of 10

(Excludes Cone)

Cone Mounted - Two Signs in One

(Excludes Cone)

Approved to NZTA M23TL-2 & TL-3 Specifications

TO40

TRAFFIC MANAGEMENT

Page 15

Pedestrian Barriers

Sentry II TL-3 Water filled Barrier TrafFix Water-CableTM Barrier

Highway Safety Vests Cone Sleeves Twin Disc Flip Sign

Water filled Barriers

SLEDTM US - up to 100km/hr

SLEDTM Mini - up to 70km/hr

Big Sandy Range

End Treatments & Barrier Systems

5096kmph

impacts

atNo Parking and Plain Cones also available

Screen-printing

Brand your cones with a screen-print logo.

Minimum order quantity applies.

Fusion - Anti-theft

Combination of Anti-theft& thermal printing.

All in one brand that leavesa permanent mark.

NZTA TTMC Compliant Cones

- 3M reflective cone collars- Internal rib to help with release

- Top hand grip- Cone collar recess- Impact tested

SlimlineTM Wide Profile Slim Composite

Fluoro Warning FlagTP09

- 6kg- 8.5kg- 15kg- Premium Hi Viz

- Highly Visible- Rechargeable - Set of 6 with Case

Fluoro MeshRolls

LED Road Safety Flares

TM18

TO80

RetractableCone BarsTO30Extends upto 2m long

Rotating Beacons

Plastic Lamp

Complete withsecuring bracketDay / night function

TK04

Wide rangeof beaconsavailable

Call our Team to discuss

Ultra Wand Long WandSafety Wand300mm x 37mmRed flash/steady

Torch & magnetic base

Also available in red/flash/green

540mm x 40mmRed flash/steady

330mm x 40mmRed flash/steady

TL8

Sizes Available: - 900mm- 750mm - 500mm

Portacones

TO10

450mm

TC12

No Stopping Cone

450mm

TC11

Road Marking Cone

The maximum size of a logo or name used for the purpose of branding road cones is 5000mm2 - i.e. 50 x 100mm with the top of the logo being no higher than 200mm +/- 20mm from the road surface - Section B2.4 of CoPTTM.

Our range of FG 300 Delineators increase visibility and improve safety in and around work zones. Use the FG 300 Curb System for further delineation & channelization.

FG 300 Range:UR - Standard modelEFX - 65% stronger than UR model with better UV stablisation

Tested to:

FG 300 Curb System- Interlocked for solid delineation- Entire System NCHRP-350 Approved

Dimensions:(Base Only)L: 965mmW: 200mmH: 50mm

SlimlineTM

Motorway

All Wands& Lamps excludebatteries

SlimlineTM

Base

Features:

ROAD SAFETY PRODUCTS

Page 16

FG 300 Delineator Range Cones

Lamps, Beacons & Accessories

900mm Cone Range Branding Services

Speed Humps Wheel stops Mirrors

Bay NumbersCustom Signage Car park Marking

Bay number plates are used to allocate all types of parking bays i.e. paid parking, rentals, car allocations, units or house numbers.

Features:- Can be removed / relocated if required ie.. reusable- Less time to install than standard concrete, so can provide cost savings overall- Manufactured from recycled rubber

All the traffic products are modular to allow you to create whatever size required for each project.

Also available: Modular roundaboutsand pedestrian crossings.

Semi Mountable Kerb

Standard section sizes: 1000mm longAvailable Corner Radius: 300mm, 500mm, 1000mm

Length: 1000mmWidth: 460mmHeight: 125mm

Traffic Island Bullnose

Speed CushionsFeatures:- Interlocking sections- Moulded white EPDM white piano keys for better visibility- 2 metre travel distance- 75mm height

Length: 1000mmWidth: 100mm, 200mm, 300mm or 500mm

Length: 1000mmWidth: 800mmWeight: 50kg per section

Wheel stops are designed to limit the travel of vehicles into parking spaces.

1650mm130mm100mm

Length:Width:Height:

Convex mirrors should be strategically positioned where the drivers field of vision is obstructed, such as blind corners, concealed entry and exits, parking buildings and intersections.

We supply a wide range of signs for car parks and facilities, including wayfinding, directional, space availability, tariff, terms & conditions and health and safety boards.

Line marking is a simple and cost effective way to enhance the appearance, functionality and safety of your premises.

16.5kgWeight:

Standard Sections:

Mid Sections:

Semi Barrier Kerb

500mm350mm50mm


250mm350mm50mm


Rated toMaximum

20 ton truck @ 40km/h

4x End sections together = 1.6m speed cushions

45kg per sectionStandard Sizes: Weight:

Height: 150mmHeight: 125mm

Semi Mountable Kerb installed at multiple intersections around Gisborne

CAR PARK SOLUTIONS

Page 17

Traffic Calming Products

Car Parking - Facilities

Standard Sign Sizes Standard Supplementary Sizes

Left

Diamond: Type A: Type B:600 x 600750 x 750900 x 9001200 x 1200

600 x 250750 x 300900 x 3501200 x 400

600 x 400750 x 500900 x 6001200 x 800

1200 x 1200

Variations:10km20km30km40km50km

60km70km80km90km

Left

Left Left

Left

Left Left

Left Left

Left

Right

Right Right

WM9R Right also available

1500 x 3000

1200 x 1200Right Right

Right Right

Right

PW-1

PW-40

PW-16 PW-16

PW-20PW-20 PW-21PW-21

PW-22 PW-22 - -PW-23 PW-23

PW-17 PW-17 PW-18 PW-18

PW-19 PW-19

PW-42 PW-41 PW-41.1 PW-41.2 PW-41.3 -

PW-2 - PW-3

WA1

WR1

WM2L

WM5L WM6L

WM7L WM8L

WM2R

WM5R

WM9L WM10

WM6R

WM7R WM8R

WM3L

WM4L

WM1L WM3R

WM4R

WM1R

WR2L WR3 WR31 WR32 WR33 WR4

WA2 WA3 WA4

WARNING SIGNS

Page 18

WA Warning - Advance of TCD

WR Warning - Road Surface

WM Warning - Horizontal Alignment


TCD CodeMOTSAM

Sign Code:

or 10%, 12%

Left

Left Right Both

750 x 600

Right

or 12%

Standard Sign Sizes Standard Supplementary SizesDiamond: Type A: Type B: Type C:600 x 600750 x 750900 x 9001200 x 1200

600 x 250750 x 300900 x 3501200 x 400

600 x 400750 x 500900 x 6001200 x 800

600 x 600750 x 750900 x 900

PW-38

PW-5

PW-43 PW-43

PW-46 PW-47 PW-52

PW-51 PW-50 PW-49 --

PW-43.1 PW-43.3 PW-43.4 PW-44

PW-44.1 PW-45

PW-6 - -

PW-39 - PW-27.1 - PW-28PW-27

WN1

WL1

WW1L

WW32 WW41 WW42

WK21 WK11 WK12 WK13WK22

WW1BWW1R - - WW2

WW21 WW31

WL2 WL3L WL3R

WN2 WN3D WN4UWN4D WN3U WN51 WN52

WARNING SIGNS

Page 19

WN Warning - Vertical Alignment

WL Warning - Lane use / Management

WW Warning - Width or Height

WK Warning - Vehicles CrossingTCD CodeMOTSAM

Sign Code:

Standard Sign Sizes Standard Supplementary SizesDiamond: Type A: Type B: Type C:600 x 600750 x 750900 x 9001200 x 1200

600 x 250750 x 300900 x 3501200 x 400

600 x 400750 x 500900 x 6001200 x 800

600 x 600750 x 750900 x 900

Controlled Uncontrolled Left LeftLeft

Left

Controlled cross road Controlled side road Uncontrolled side road Controlled T Junction Uncontrolled T JunctionRight

Right

Right

Right Right Right RightLeft

Left

Left1000 x 200

Crossbuck for private level

crossing

Only to be used where private roads cross a railway line

Variations:3 or 4 Tracks1500 x 300

Left Left Left Left

Left Left Both

PW-8

PW-11

PW-13

PW-57

PW-63 PW-14 PW-14 PW-15--

- PW-58 PW-59 PW-60 PW-60.1 PW-60.2

PW-13 PW-13.1 PW-13.2 PW-13.3

PW-12.1 PW-12 PW-4 -

PW-9 PW-9.1 PW-10.1 PW-10 PW-11.1

WJ1

WJ5L

WXR1

WX1R

WX2L

WX11

WXR2 WXR3 WXR4 WXR5WXL1

WX1L

WX2R WX5 WX6 WX61 WX7WX62 WX63

WX3 WX8 WX41 WX42 WX40

WXL2 WXL3 WXL4 WXL5

WJ6U WJ6L WJ7L WJ7B

WJ2A WJ2L WJ3U WJ3L WJ4L

WARNING SIGNS

Page 20

WJ Warning - Junction

WX Warning - Railway Level Crossing


TCD CodeMOTSAM

Sign Code:

Standard Sign Sizes Standard Supplementary SizesDiamond: Type A: Type B: Type C: Type D:600 x 600750 x 750900 x 9001200 x 1200

Variations:100m, 150m etc

Variations:950 x 300

TCD Rule: W14-11

TCD Rule: W18-3.12TCD Rule: W18-3.10

BelishaBeacon Disc

TCD Rule: W14-11.1

20km, 25km etcVariations:

3km, 4km etc

600 x 250750 x 300900 x 3501200 x 400

600 x 400750 x 500900 x 600

750 x 750900 x 900

800 x 2501000 x 3001200 x 3501600 x 500

PW-64

PW-53

PW-29

PW-34.1 PW-34.2 PW-35 PW-36 PW-65

PW-30 - PW-31 PW-32 - PW-34

PW-54 PW-55 PW-56 PW-48

PW-64.1 PW-64.2

-

PW-43.2PW-26 PW-24 PW-25

WG11

PW-37

WF11

WZ1

WU1

WU51 WU52 WU62WU6 WU7

WU3 WU11 WU2 WU22

WU4

WU23 WU5

WZ11 WZ12 WZ13 WZ2 WL4 WL5

WG12

PW-37.1

WF12

WG13

-

WF13

-

WF22 WF31 WF35

WG3

PW-36

WF21

WG2 WG4 WG5

WARNING SIGNS

Page 21

WG Warning - General Supplementary

WF Warning - Fauna (Animals)

WZ Warning - Miscellaneous

WU Warning - User Non Motorised

TCD CodeMOTSAM

School ZoneTimes

40 km/h Advisory School Sign

School ZoneEnds

School Zone Supp(40k Sign sold separately)

Note: Sightboards can also be made black on a yellow reflective background for roundabouts & T-junctions.

Left

2 Bar Chevron:Urban: 1650 x 600Rural: 2530 x 900

Roundabout:1200 x 450

Sightboard:T Junction2400 x 600

Sightboard:Roundabout1600 x 400

Left Right

Bridge End Markers

1200 x 400

570 x 500 570 x 500

825 x 300

Obstruction Marker

150 x 375150 x 900

Crash Cushion

600 x 750

SLED End Treatment Panels

700 x 700

Sightboard:T Junction4800 x 600

T Junction:3000 x 600(minimum size)

2x 2400 x 600 panelsFigure 5.12Figure 5.12

W20-1.4

Figure 5.13



1 Bar Chevron:Urban: 450 x 600

PW-66

PW-69 PW-68

RC-1

RC-5RC-3

RC-7

RM-6 RM-6 RM-7

PW-66 PW-67

RS6V RS6 RS61

WYS3

WYR2 WYT3

WYT1 WYT2

WYR1

WYBL WYBR

WV12

WV14

WV11

WV13

WYHM

WYC3

WYS4 WYC1

WARNING SIGNS& SCHOOL ZONE SIGNS

Page 22

WV Warning - Vehicle Mounted School Zone - Static Signs

WY - Warning - Delineation and Hazard Markers Left hand version shownRight hand version available

Sign Code:

Make cycling easier and more enjoyable by creating bicycle-friendly spaces with our range of Bike Repair Stands & Bike Pumps. The entire suite can be tailored to suit your brand, your style and your project goals.

Applications:- Council parks- Cycle ways & routes- Bike trails- Bus and train stations- Universities- Hospitals- Corporate offices- Shopping Precincts

- Great for Events- Aesthetic- Easy to deploy- Transportable- Lightweight and collapsible- Robust & Safe

Bike Pumps & Wheel Chocks

Temporary Lane Delineator

Riley® Kerb in conjunction with FG 300 Delineators offers protection to cyclists in all types of situations.

The Riley® Kerb acts as a rumble device to alert drivers they are crossing into the cycle lane.

Specifications:Length: 2000mmWidth: 159mmHeight: 25mm

Features:- Low maintenance with super-tough polyurethane posts- Curb sections impact tested at 112kph- Moulded with solid colour- Internal radial rib structure supports 10,000 lb (pounds) of loading- Length: 965mm. Height: 50mm

The FG 300 Curb System is a modular, lane separation system that provides efficient and cost effective channelization of traffic.

Entire SystemNCHRP-350 Approved

Interlocked for solid delineation

Cycle laneconcept only

Yellow or orangealso available

Features:- Only 2.5kg per section- Yellow recycled rubber- Built-in reflectors

The Island Curb Delineator is designed to improve the visibility of raised islands, median noses, pedestrian refuges and roundabouts.

With Prism technology a sign can have up to three different messages in one unit.

The signs feature rotating panels that have three sides, that each have a different graphic.

When activated, the panels rotate, changing the sign message.

Specifications:Length: 1200mmHeight: 50mmDepth: 30mmColour: Yellow or White

Features:- 100% polyurethane- 25mm reflective strip- Notched foot so unit can match curvature

MO25

Public Repair Stands Deluxe Repair Stands Wave Delineators

PEDESTRIAN& CYCLE SAFETY

Page 23

Island Curb Delineator

Riley® Kerb - Cycle Delineation FG 300 Curb System

Prism Signs

Cycling Infrastructure

Bridge Advance

Variations:

Refer to Temporary Warning

10km to 90km

Bridge Giveway Bridge Priority

Combination ofWW2 + RP51

Combination ofRP51 + RP22

Combination ofWW2 + RP52

Combination ofRS1 & TG1

* Items sold individually

For more information, please see the School Safety Page

RG-5

RG-19 RG-20 - - --

-

RG-30

RG-1 RG-2 RG-2.1

RG-27 - - RG-33 RG-32 RG-31-

RG-6 RG-6.1 RG-6.2 RG-6.3 RG-6R RG-19.1

RG-28

RP1

RP75

RP76

RP61

RS1 RS2 RS3 RP3RS1T*

RP62 RP63 RP65 RP66 RPX2* RPX3**Items sold individually

RPX1*

RP51 RP52 RP53* RP54* RP55*

RP2 RP71 RP72 RP73 RP21 RP22

REGULATORY SIGNS

Page 24

RP Regulatory - Priority

RS Regulatory - Speed Regulatory - Other

Left Right No U Turn

No Turns

1 Panel 2 Panel

Two options available

3 Panel

Left Left

Turns

Twin Disc - Left

RG-8

RG-10

RG-24

RH-2 RH-4 RH-4 RH-4 RH-6 RH-5 RH-1RH-1

RG-23 - RG-21 RG-25 RG-26B

RG-14 RG-18 - - - -

RG-7 RG-15 RG-9 RG-16 RG-17 RG-17.1 RG-12

RG-11

RD1L

RD6V

RJ11

RJ51 RJH1 RJH2 RJH3 RJ53 RG3 RJC RJI

RJ12 RJ13 RJ21 RJ22 RJ3 RJ4

RD7 RD4 RD41 RD71 RD71 RD72

RD1R RD1U RD2 RD3 RD6L RD6L RD5L

RD5

REGULATORY SIGNS

Page 25

RD Regulatory - Direction and Placement

RJ Regulatory - Road User Restrictions


TCD CodeMOTSAM

Sign Code:

TCD CodeMOTSAM

R5-13R5-13.1R5-13.2

No cruising zoneNo cruising zone beginsNo cruising zone ends

Left Straight Left

RG-29

- RP-3.2 RP-3.3

& RP-1.3 RP-3.4 RH-5

RG-35 RG-35 RG-35.1 RG-26 RG-26A RG-26C

RG-26D

-RG-29 RG-22 -

RL1L

RG1

RLT1 RLS3 RL61 RL62

RG21 RG22 RG51 RG3 RJ84

RL52

RLB2 RLU1 RLU2 RLU3

RLU4

RLB1

RL1S RL41RL2L RL51

REGULATORY SIGNS

Page 26

RL Regulatory - Lane Use

RG Regulatory - General Supplementary


Sign Code:

TCD CodeMOTSAM

Zone Parking Shared Zone

RP-7 RP-9

RP-9.1 - - -

- - - - RP-10 RP-10.1 -

-- -RP-11RP-11

RP-4 RP-4.1 RP-4.2 RP-4.3

RP-12 -

-

RP-7.1 RP-7.2 RP-7.2 (Alt) RP-8 RP-8.1

PZ13 AB5

PP21 PP2

PP31

PP2 PP3

PPS3

PP21 PP22 PP22 PPS3

PP31 PP13

PP21PP21 PP3 PP31 PP2

PP2PP21 PP21 PP22 PP3 PP31

PP22 PPS2 PPS2 PP2 PP21

PARKING SIGNS

Page 27

Parking - Class or Time Restricted Left hand version shownRight hand version & double arrow available

Sign Code:

TCD CodeMOTSAM

Variations:1km, 2km & 3km

RP-1

RP-3.1

- RP-5

RP-6.1 - -

- - - -

RP-5.1 - -

-

RP-3.5 RP-3.2 RP-3.3 RP-1.2

RP-6

RP-2.1

RP-1.1 RP-2 RP-3

PN1

PCH3

P1 P21 P22

P22P12

P13 P14 P14

P22P22

P22

P22 P22

P12P22 P11

P23 P21

P21

P21

PCV3 RG21 RG22 PNS1 PNS3

PN11 PN13 PCH2

PARKING SIGNS

Page 28

Parking - No Stopping Left hand version shownRight hand version & double arrow available

Parking - No Parking Left hand version shownRight hand version & double arrow available

Sign Code:

Graphic symbols are becoming internationally established as a means of overcoming language barriers. These signs indicate information required by the public in relation to outdoor recreation (i.e.. parks, recreation areas, reserves, forests and waterways). All signs comply with NZS8603 Prohibited Activities: Signs overprinted with prohibition bar (Please specify when ordering)

They are categorised into five groups:

Facilities

Management

Land Based Activities

*NOTE: These ORS graphics are some examples only . There are over 89 different symbols

Services

Men/ Toilet

Vehicles

Toilets Shelter

Hunting/ Shooting

Airfield/Airstrip

HelicopterLanding

ChairLifts

Campervan Caravan Dogs Disabled Access

NoSmoking

KilometreMarker Post

Reference Station Sign

Information Field / Visitor Centre

DrinkingWater

First Aid Telephone DumpingStation

Ramp Reference Station Sign

Game Bird Hunting

Established Route Position Sign

DownhillSkiing

BridgePosition Sign

Ski Touring MountainBiking

Cycling

ORS-84 ORS-85 ORS-86 ORS-87 ORS-88 ORS-89




IG-12 IG-13 IG-14 IG-15 IG-16

LR-KMP LR-RS LR-RS-R LR-ERP LR-ID

OUTDOOR RECREATIONALSYMBOLS (ORS)

GENERAL INFORMATION SIGNS

Page 29

State Highway Distance Markers

Advisory - Other

Right handversionsavailable

Other distances available. Left hand

version shownRight hand version

& double arrow available

IG-1 IG-5

IG-6

IG-18 IG-18 IG-19 IG-19

IG-11IG-23 IG-23 IG-24

IG-6.1 IG-7 IG-8 IG-9 IG-10

IG-4 IG-17IG-2

IG-3 -

AE1L AE2L AE31 AE32

AT1

Cycle Trail

IG-20

AU11

-

AU13

IG-21

AU12

-

AU41

AB41AB42AB43

IG-22

AU2L

-

AU51

-

AU42

AP2 AP11 AP22 AP33 AP32 AP34

AH1L AH1A AH21AJ11 AJ12

AX11 AX12

ADVISORY SIGNS

Page 30

AJ Advisory - Junction AH Advisory - Heavy Vehicles

AP Advisory - Passing/ Overtaking

AE Advisory - Effluent

AU Advisory - Users, Non Motorised

Other distances available. Left hand version shownRight hand version & double arrow available

AX - Railway Level Crossing

Advisory - Other AT - TemporaryTCD CodeMOTSAM

Sign Code:

Fluoro orange Fluoro orange or reflectorised

Kit optionsavailable

Safety Flag Safety VestPedestrian Crossing Pole

Kea Crossing

TP09 TV27PC06PC04

LED Belisha Disc Stayput School Patrol SystemSaf-T-Arm® School Patrol System

School Patrol Sign

Single Arm also available

PC02

Safety of children at road crossings is essential. RTL has a complete range of highly visible products.

The Stayput School Patrol System is the only system where you do not have to carry the equipment out each day and set it up.

The patrol arm / disc simply stays out and is securely locked away into the top cover when not required.

Our LED Pedestrian Belisha Discs are

internally illuminated and provide a safe, evenly lit and highly visible sign surface.

Rotating Beacons

- 12v or 24v- Flashing/ strobe

50mm Red / 50mm White Magnetic or permanent Conspicuity Tape Slow Moving

Vehicle Safety Triangle

Rear Chevrons Hazard PanelsCustom Sizes Left Right

1100 x 300NZTA HHA

Transport Flag

450 x 300Also available with handle

Compliments& Complaints Sign

600 x 381

Standard Sign Sizes 1100 x 6001100 x 520

Other options available

HT04 02

HT04 08

HT-9 HT-8HT04 17 HT04 15

HT04 11 HT04 01 HT04 14 HT04 16

HT04 05 HT04 06 HT04 03 HT04 04 HT04 07

WV27 WV28 WV28 WV29

WV22WV21 WV23 WV24 WV25 WV26

SCHOOL SAFETY& TRANSPORT

Page 31

Transport - WV Warning - Vehicle MountedTCD CodeMOTSAM

Sign Code:

TCD CodeMOTSAM

Service Signs are used to indicate services commonly used by travellers including rest stops, public toilets, petrol stations, parking and medical services. They are used to highlight services that are not obvious to passing motorists. Sizes may vary according to symbol(s) used. There are four different types with examples of each type shown below. RTL provides a full range of Service Signs.

Adjacent to Road

On Side Road

Chevron

Arrow

Symbols

S 18Airfield

S 8Refreshments

S 19Boat ramp

S 9Meals

S 20Wheelchair access

S 10Information

S 1Rest Area

S 2Accommodation

S 12Public telephone

S 3Camping ground

S 13Public toilets

S 4Caravan park

S 14Waste disposal point

S 15Public parking area

S 6Motor fuel

S 16Truck parking area

S 7Motor fuel & Repairs

S 17Truck trailer parking area

S 5Camping ground & Caravan park

S 1124 Hr EmergencyMedical Service

A tourist facility is defined as a geographic feature, commercial enterprise or scenic route, which is mainly of interest to tourists. It may be located adjacent to the road or on a side road. There are five types of sign in the tourist sign series and these are:

- Signs for Major Tourist Attractions - Tourist Drive Route markers - Position Signs - Tourist Drive Information Signs - Advance Signs

Examples of Typical Signs:

Advance Signs Position Signs

Advance & Motorist Services

Confirmation Sign

Adjacent to the road & on side road

Intersection Sign

Tourist Drive Route Marker Signs

Please specify required text. Sizes vary depending on destination names.

InformationSign

TR-4

TR-1 TR-2 TR-3

MS-1.1 MS-1.2 MS-1.3 MS-1.4 MS-3.3

MS-3.1 MS-3.2

MS-2.1 MS-2.2 MS-2.3 MS-2.4 MS-4.4MS-4.3MS-4.2MS-4.1

MS-3.4

TR-5 TR-6

TS-3 TS-4

TS-5

TS-1 TS-1 TS-2

SERVICE & TOURIST SIGNS

Page 32

Tourist Signs

Service Signs Sign Code:

5096kmph

impacts

at

Assortedcoloursavailable

Raised Pavement Markers

MR07

Permanent& temporaryoptions available

Aerosol Markers

MK21

Non ReflectiveWhite or Yellow

Reseal Markers

MO15

ProfessionalMeasuring Wheel

MO30

Deluxe modelalso available

Edge Marker Posts

PVC1.4m Long

Steel-Flex® Range

Very fast and easy to install.

Available plainor delineated.

Sizes: 1000mm or 800mm

Steel-Flex®Surface Mount

The multi fit bracket system allows for 360° swivel on the post so you always get the correct alignment

Guard Rail Marker Barrier Delineators

MP01 MP04 MP30 MD03

Options:Double or single sidedYellow / white

825mm1200mm

Surface Mountor Inground

Stay RightSelf Righting Post

PS03

800mm

Vertiflex Self Righting Post

PS02

60mm & 76mmVariety of sizes available

End caps & ground sockets to suit

Steel Poles

PS10

3.6m longPainted white

Wooden Posts

PS08

FG 300 DelineatorBoth the UR & EFX models are made from polyurethane, the toughest polymer on the market. Both models feature easy pin release.

Range:UR - Standard ModelEFX - 65% Stronger than UR Model Better UV Stablisation

Tested to:

TemporaryCoPTTM Compliant

Permanent

Clover LeafDesign

Steel Flex is the most durable post available. Guaranteed for up to 10 years. Proven to rebound to vertical after 1500 impacts

Culvert Markers (Green) & Hydrant Markers (Blue) also available

MP04

Surface Mount

SIGN SUPPORT& MARKING SYSTEMS

Page 33

Sign Supports

Marking Systems

Marker Posts Guard Rail Delineators

Lane Delineators

Universal Channel Clamp(UCC)

Strapping Systems

Buckle Straps

Strapping & Buckles are available in 13, 16 and 19mm widths

Precut 19mm Strapping c/w buckleAvailable in 660mm or 1120mm lengths

Different sizes available Different sizes available Different sizes available

Applications:• Pedestrian areas• Shared Zones• Parks & Reserves• Car parks• Shopping Centres• Business Parks

Anti-Rotational Clip RHS Clip Fixing BracketsBack to Back Clip

ARC BBC LRHAUO AUO Back to Back

SFXSNBKT02TD1010 TDBKT

OSBMM OSBMNZ-01Slide on Offset Bracket

Street name brackets can be used in a variety of configurations

Combination Mid & end mount

End to end mount Mid mount End mount

Signfix Poles and Sockets

Examples of brackets and strapping

Timber Post Slide onOffset Bracket

Mini Tee Offset Bracket

The Signfix Bollards are highly versatile, look great and are easy to install.

Available in 102mmor 114mm dia

Mid Mount Bracket

Wide range of frangible aluminium poles and groundsockets available - 60mm to 114mm diameter

Safety Ground Socket(with wedge)

Ground Socket(with grub screw)

SIGNFIX SUPPORT& FIXING SYSTEMS

Page 34

Bracket Configurations Signfix Bollards

Street Name Blade Brackets

Brackets

Sign Supports & Strapping Systems

Mounting situation Minimum desirablemounting height (m)

General minimumThis is the height the sign must be mounted as a basic minimum requirement. In some situations, heights may be lower, such as chevron boards on roundabouts, curves, etc

1.5 Mounting height must be measured from the underside of the sign, or the lowest sign in an assembly of signs, to the surface of the adjacent road, trafficable shoulder or top of kerb, whichever is the criticaldimensionRural areas (no footpath) small sign 1.5

large sign 2.1

Urban areas (not over or near a footpath) Mounting heights need to be increased in urban areas to avoid sign visibility problems caused by parked vehicles

small sign 2.0

large sign 2.1

Over or near a footpath if likely to obstruct 2.5 Mounting height must be measured to the ground surface or footpath immediately beneath the sign

Overhead signsMounting height is important when there is no alternative route for over-dimension loads. (An absolute minimum of 5.3m can be used where the sign is located over an emergency shoulder or parking lane)

6.0 Mounting height must bemeasured to the road surface immediately below the sign

Figure 7.3 Urban location single pole support Figure 7.4 Urban location single polesupport over a footpath

Table 7.4 Minimum desirable mounting heights for traffic signs

SIGN MOUNTINGDetails for Roadside Mounted Signs

(Regulatory and Warning Signs)

Page 35

Mounting Heights - Single Post

Mounting Heights

• For signs with two posts, the spacing should be approximately 60 percent of the sign width.

• Where signs are located on a footpath, consideration needs to be given to pedestrian accessibility around the post and to providing sufficient width to avoid the risk of an errant vehicle striking one or more posts. Further information can be found in the NZTA’s State highway geometric design manual and the RSMA Compliance standard for traffic signs.

Note 1: The offset from the barrier will depend on the type of barrier system, i.e. rigid, semi-rigid andnon-rigid barriers. Note 2: Distance between posts is determined by the width of the sign. Refer to section 7.3.4 of this document.

Figure 7.7 Rural location behind a guardrail

Figure 7.5 Urban location two-pole support Figure 7.6 Rural location standard two-pole support

As a rule:


Page 36

Road and environment type Lateral clearance

Minimum (mm) Maximum (mm)

Urban Kerbed Mountable 500 (where minimum lateral clearance cannot be achieved,the sign mounting height must be increased to at least 4.6m to ensure adequate clearance height for most vehicles)

-

Non- mountable 300 -

Un-kerbed(including urban arterial expressways)

600 5000 (from nearest lane/closest edge

Kerbed(channelised intersections)

500 -

Rural Un-kerbed 600 (from outer edge of theroad shoulder, line of edgemarker posts or face of guardrail)

5000 (from nearest lane/closest edge)

Where minimum lateral clearances for kerbed roadways in table 7.2 cannot be provided, the mounting height above the roadway should be increased to at least 4.6m to avoid damage from trucks and vans.

Figure 7.1 Lateral and height clearances for regulatory and warning signs in kerbed roadways

Figure 7.2 Lateral and height clearances for regulatory and warning signs in un-kerbed roadways

Non-mountable kerbs:Not less than 300mm

Mountable kerbs:Not less than 500mm


(Regulatory and Warning Signs)

Page 37

Kerbed Roadways - Urban & Rural

Lateral Clearance for Traffic Signs

Un-Kerbed Roadways

Table 7.3

Cleaning Agent Cautions UsesWater (+ a few drops of detergent)

This is the first cleaner to be tried. It is best when cleaning typical road film and pollen from sign face.

Can be used on signs made with overlay vinyls and or signs made with screen printed legends.

Isopropyl Alcohol IPA+ 50% water

A good cleaner that may remove some graffiti and it is an ideal cleaner for surface grease.


Citrus based Cleaner

This cleaner can be very effective cleaning new graffiti and removing adhesive grease.


Kerosene or mineral spirits

This is used when others in line don’t work. It is better at removing many paints but care should be taken not to scrub too hard as this may damage the surface.

Care should be taken not to use this type of cleaning agent if the sign has a screen printed legend as it may also remove the sign legend. It can be used if the sign has a graffiti protective overlay.

Lacquer Thinners& Acetone(use with care)

Use of this agent is not recommended unless all other cleaners have been tried. It is highly likely to damage the sign if not used sparingly and lightly on the specific area only.

Use with CAUTION. Solvent based cleaning agents will remove screen printed legends and using this type of cleaning agent may in itself damage the sign and should only be used as a last resort. Can be used with care over graffiti protective overlay.

To keep signs in the best possible condition, we recommend regular cleaning. This maximizes the sign visibility/ performance.

Please refer to the table below for tips and recommendations:

SIGN CLEANING

Page 38

TX

RX230V50Hz

5a

5b

2 3

4

9

610

18

7

840

1230

350220

910

ELDOM34LG - ELDOM34DG

1275

30093

8500

858

ELDOM6DG

Models

Features:- Metal build- Modular construction- Adjustable boom holder (Right or left)

- Incorporated electronic programmer for easy integration- Low voltage motor- Robust design

ELDOM34 - 3 / 4m Arm:- 24v motor

- Opening Times: 3 to 4 seconds

ELDOM6 - 6m Arm- 24v motor

- Opening Time: 7 seconds

BarrierMechanical selector switchPhotoelectric cells All pole circuit breakerVehicle detection loop

1.2.

3.4.5a.

Key:

Access Control

Safety loopStandard Boom/ ArmWarning lightElectronic programmerFixed support forkPassive safety edge

NOTE: The drawing is not to scale - for indicative purposes only.

5b.6.7.8.9.10.

Free Phone: 0800 427 346 Web: www.hardingtraffic.co.nz Email: [email protected]

TrafficDirection

(Exit)

TrafficDirection

(Entry)

Features:- 3 LED lamp with audio buzzer- Powder coated aluminium housing- Visible from both directions- 230v mains power

Designed to warn pedestrians that a car is exiting a parking area or blind corner.

LED Pedestrian BelishaDiscs are also available

Our Illumin8TM LED Signs are designed to highlight or enforce road conditions where standard retro-reflective signs on their own do not suffice. They are edge-lit so are best suited in low light or dark conditions.

Features:- Low maintenance cost- Improved road safety

- Easy to install- Visible from wide angles

Options:- Single sided if required

CAR PARKS

Page 39

Barrier Arms & Access Control

Car Coming Sign Illumin8™ LED Signs

Our flush mounted LED lights are designed to set a new standard of in-road lighting. They are simple to install, easy to maintain, intelligent, durable and versatile across a broad range of LED road safety applications.

The LED lights use inductive power therefore no physical wire connection between the power source (buried cable) and the light. Fast installation and easy maintenance are the main benefits over traditional hardwired systems.

The capabilities of the inductive power system provide the LED lights with an array of functions such as dimming, flashing, sequencing animation, and lights being fully controllable and programmable.

- Light units are uniquely addressable- Built to perform in extreme conditions- High impact UV stable polycarbonate housing- Scratch resistant coating- Waterproof, no corrosion- Flush mounted- Inductively powered- Self-cleaning design

- Auckland International Airport- Wellington International Airport - Christchurch International Airport- Terrace Tunnel Wellington- Ports of Auckland- Fonterra Takanini- Port of Napier (Main Entry)- Queen St / Stafford Rd, Northcote (Pedestrian Crossing)

Features:

Introduction

Example Projects:

Inductive LED lighting installed at Auckland Airport, Auckland


Harding Traffic have a wide range of wayfinding signage for small, large and multi storey car parks.

The signs are a combination of static & LED panels and show the number of spaces available and FULL when no more spaces are available.

If you would like more information on our wayfinding or plinth signage, please contact our sales team on 0800 427 346 to discuss your project or sirequirements.

Dynamic Wayfinding Signs

INDUCTIVE LED LIGHTING& LED SIGNAGE

Page 40

Introduction

Our universal, full matrix EWS features two stage activation so when the in-built radar detects a vehicle, the LED display is activated.

- NZTA compliant to P32- Amber / white LED technology- Display meets EN12966-1- In-built radar sensor & data logger- IP55 rated enclosure- Powder coated black/grey aluminium housing- Universal configuration of image & message to suit

*Includes Solar charging

Our SID sign is designed to detect vehicle speeds and display them on the highly visible LED screen. If the vehicle is faster than the programmed threshold, the sign will automatically display the words SLOW DOWN. Our SID sign can be mains or solar powered and pole or wall mounted.

Our Mobile Speed Unit is a battery powered, trolley mounted SID Sign. The unit has all the functionality of a standard SID sign while having the advantage of being highly compact and portable. Our MSU unit is ideal for large warehouses, manufacturing plants, industrial sites, depots and car parks where speeding is a potential issue.

Mutual Features:- Compact & lightweight- Two stage activation- In-built sensor & datalogger

- Amber / white LED technology- Display meets EN12966-1- Downloadable data

RIAW Signs have been developed to reduce the severity of potential impacts by reducing the speed limit of the main road around rural intersections.

RIAW Signs have been developed as part of NZTA’s safer journeys strategy.

One of the strategy objectives is safety improvements at high risk rural intersections.

Designed to provide a safer environment around schools.

- NZTA compliant to meet Traffic Notes 37 & 56- IP65 enclosure

Weight:- 25kg excluding batteries- 47kg including batteries

40km School Zone Active Flashing Rural School Zone

Rural Intersection ActivatedWarning Signs

Static sign incorporating flashing LED wig wags.

- Designed to meet NZTA Traffic Note 56

- IP66 enclosure rating wig wags

Features:- Timer based activation start / end school days - Powder coated black / grey aluminium housing- Automatic 7 day timer- Solar panel charging- Wireless controller communication

Other Sign Examples:


Features:

LED SIGNAGE

Page 41

Speed Indication Device ( SID) Mobile Speed Unit (MSU)

School Zone Signs RIAW Signs

Electronic Warning Signs (EWS) - LED

0800 785 744

www.rtl.co.nz

Auckland Wellington Christchurch Invercargill

Documents

Product Guide - RTL · Permanent speed limit or RCA designated operating speed (km/h) ≤50 60 70 80 90 100 Traffic signs A Sign visibility distance (m) 50 60 70 80 90 100