Upload
original-ltd
View
85
Download
0
Embed Size (px)
Citation preview
Original VR70
High performance, immediate, on-demand compressed air
- image -
A first class solution
Original Ltd is one of Europe’s largest producers of engine-driven compressor mount and drive systems. Solutions are designed in close collaboration with major van and commercial vehicle manufacturers.
The Original VR70 is a high performance, under-chassis mounted, vehicle engine-driven air compressor system. It delivers immediate, ‘plug-in and power-up’ on demand compressed air. A market-leading system for mobile tyre inflation, changing and servicing applications.
With the combination of experience and vehicle manufacturer relationships, the Original VR70 is a compelling alternative to conventional skid-mounted, split-shaft and side-mounted systems.
Instant performance
Uniquely engineered, the Original VR70 is totally integrated within the vehicle space envelope, and does not compromise the drive-train, chassis or payload area and has no ground clearance restrictions. The payload area can be fully utilised for workspace and storage as required.
Compact and lightweight
Once the vehicle engine is at operating temperature, press the button, and within seconds the Original VR70 is ready to deliver up to 70 cfm at up to 175 psi (subject to vehicle). Factory-set, built-in controls match the vehicle’s RPM to specific requirements, ensuring smooth and economical operation.
Technical dataCompressor output 20 to 70cfm (Vehicle dependent and factory set) 0.56 to 2m³/m
Operating voltage 12v
Engine operating speed Approx. 1400 to 2500 rpm (Depending on the specific vehicle and output required)
Pressure output 100 to 175 psi max / 7-12 bar
Power source Vehicle drive belt
Engine mounted Yes
Total system weight 74kg, 163lb
Engagement Electromagnetic clutch
Oil capacity 6 litres
Oil separator BSEN286 pt1
Oil carryover ISO 8573-1 Class 3 (21mg/m3)
Oil cooler 12v
Filters Spin-on
System operation management Electronic control system
Protection Over pressure and over temperature shut off, automatic travel disengagement and blow down
Health and Safety Remote start/stop facility
Operating temperature - 48ºC to + 40ºC
Original VR70
For tyre inflation, changing and servicing applications
For more information 0345 50 50 222
Compressor system
• No downtime, 100% duty cycle, for instant air and quickest cycle times• Air on-demand, no charging of air cylinder tank, the job is finished sooner• No air receiver tank required – discharges to atmospheric pressure within 12 seconds• Approximate total Original VR70 system weight is 74kg, including oil fill• One lightweight oil/air separator, easily accessible filtration• Patented low profile modulating high flow inlet valve with air filter• Cast mounting brackets for easy installation• Full nationwide customer support and aftersales service packages
Engineering specification
• Each system is individually designed for the specific installation vehicle and is engineered in collaboration with OEM engineers including full FEA and stress analysis of complete drive system
System design
• Integrated engineering design to ensure maximum performance • Field trial tested in real world environments to ensure durability and long life• Cast brackets are subjected to computerised stress testing
System installation
• Under bonnet mounting limits exposure to moisture and minimises corrosion• EU legislation compliant - Located in the noise-suppressed envelope of the engine
compartment
Original VR70
Document Ref: PGVR70 v.1.45TS May14
Original Ltd Unit 52Atcham Business ParkShrewsbury, ShropshireSY4 4UG
Tel: +44 (0)345 50 50 222Fax: +44 (0)345 50 50 [email protected]
Type Euro Engine kW/hp Fuel Trans Alt [V/A] NotesYear Chassis Chassis
Type Part No.From To From To
213 / 313 / 413 / 513 216 / 316 / 416 / 516 CDI
5OM 651 DE22LA MG2 / MG3 4cyl 2143cc
95/129, 120/163
Diesel Manual14/120 14/180
Does not fit vehicles with:- MZ0 BlueEFFICIENCY. - H08 / HH7 / HH9 AC options. - KB0 Extended range fuel tank option. - N62 / N63 FEAD options. - T16 right hand sliding door.
2009 2010 - S534162
MWB 4000-006
LWB 4000-008
213 / 313 / 413 / 513 216 / 316 / 416 / 516 CDI
5OM 651 DE22LA MG2 / MG3 4cyl 2143cc
95/129, 120/163
Diesel Manual14/120 14/180
Does not fit vehicles with: - MZ0 BlueEFFICIENCY. - H08 / HH7 / HH9 AC options. - KB0 Extended range fuel tank option. - N62 / N63 FEAD options. - T16 right hand sliding door.
2010 - S534163 -
MWB 4000-009
LWB 4000-010
Chassis Cab MWB
4000-011
213 / 313 / 413 / 513 216 / 316 / 416 / 516 CDI
5b+ OM 65195/129, 120/163
Diesel Manual14/120 14/180
Does not fit vehicles with: - MZ0 BlueEFFICIENCY. - H08 / HH7 / HH9 AC options. - KB0 Extended range fuel tank option. - N62 / N63 FEAD options. - T16 right hand sliding door.
2013
MWB 4000-017
LWB 4000-018
Chassis Cab MWB
4000-019
213 / 313 / 413 / 513 216 / 316 / 416 / 516 CDI
6 OM 65195/129, 120/163
Diesel Manual14/120 14/180
Does not fit vehicles with: - MZ0 BlueEFFICIENCY. - H08 / HH7 / HH9 AC options. - KB0 Extended range fuel tank option. - N62 / N63 FEAD options. - T16 right hand sliding door.
2013
MWB 4000-017
LWB 4000-018
Chassis Cab MWB
4000-019
LWB: 300 / 330 / 350 LWB EL: 350
42.4 Duratorq TDCi 2402cc 4cyl
74/100(PS)85/115(PS)
103/140(PS) Diesel 5 Speed
Does not fit vehicles with: - RH side load door. - Long range 103L fuel tank. - AWD version.
2006 2011 LWB 4000-003
MWB: 330 / 350 MWB EL: 350 / 350HD / 460
4 2.4 Duratorq TDCi 2402cc 4cyl
74/100(PS)85/115(PS)
103/140(PS) Diesel 6 Speed
Does not fit vehicles with: - RH side load door.- Long range 103L fuel tank. - AWD version.
2006 2011 MWB 4000-003
LWB: 300 / 330 / 350 LWB EL: 350
5 2.2 Duratorq TDCi
74/100(PS)85/115(PS)
103/140(PS) Diesel 5 Speed
Does not fit vehicles with:- Stage V Model Year 2014 Ford Transit Euro 5 (Facelift)- RH side load door. - Long range 103L fuel tank. - AWD version.
2011 2014 LWB 4000-015
Vehicle applicationsMercedes-Benz Sprinter
Ford Transit
Disclaimer The contents of this publication are correct at time of publication. Original Limited reserves the right to vary, modify or change any of its products, services or specifications including those described or referred to in this publication at any time without prior notice.
AUTOMOTIVE ENGINEERING