Embed Size (px)
Citation preview
PRO
DU
CT
GU
IDE
C
OIL
, SH
EET
& P
LATE
COIL, SHEET & PLATE PRODUCT GUIDE
STA
INLE
SS S
TEEL
MA
Y 2
014
S&T STAINLESS LTD
Head Office 7 Bruce Roderick Drive
East Tamaki, Auckland 2013
P: +64 9 271 1780
P O Box 58880, Botany, Auckland 2163
F: +64 9 271 1970
Auckland 7 Bruce Roderick Drive
East Tamaki, Auckland 2013
P: +64 9 271 1781
P O Box 58880, Botany, Auckland 2163
F: +64 9 271 1799
Mt Maunganui 18 MacDonald Street
Mt Maunganui South 3116
P: +64 7 574 0095
P O Box 4158, Mt Maunganui South 3149
F: +64 7 574 0096
Hamilton 27 Ellis Street
Frankton, Hamilton 3204
P: +64 7 847 8456
P O Box 1133, Waikato Mail Centre, Hamilton 3240
F: +64 7 847 0354
Hastings 117 Elwood Rd
Hastings 4172
P: +64 6 876 3360
P O Box 14043, Mayfair, Hastings 4159
F: +64 6 876 3411
New Plymouth Cnr Connett Rd & Mustang Dr
Bell Block, New Plymouth 4373
P: +64 6 755 3971
P O Box 3094, Fitzroy, New Plymouth 4341
F: +64 6 755 3974
Wellington 141 Hutt Park Road
Gracefield, Lower Hutt 5010
P: +64 4 568 5014
P O Box 38065, Wgtn Mail Centre, Lower Hutt 5045
F: +64 4 568 6367
Nelson 4c Akersten Street
Port Nelson, Nelson 7010
P: +64 3 548 0603
P O Box 413, Nelson 7040
F: +64 3 548 0588
Christchurch 200 Maces Road
Bromley, Christchurch 8062
P: +64 3 381 1994
P O Box 570, Christchurch 8140
F: +64 3 381 0606
Toll free 0800 426 787 Website www.stainless.steelandtube.co.nz
CONTENTS – SECTION A
SHEET / COIL / PLATE / MESH
Cut to Length (Sheeting) Line A2
Satin Sheet Polisher A3
Protective PE Film Application A4
Surface Finishes – Coil Sheet Plate A5
Plate A6
Coil A7
Sheet A8
Patterned & Architectural Stainless A10
Wire Mesh A14
Perforated Sheet A15
Expanded Metal A15
A2 STAINLESS STEEL CATALOGUE
CUT TO LENGTH (SHEETING) LINE
S&T Stainless is the first (and only) company in New Zealand to install a Cut To Length Line dedicated to levelling and cutting Stainless Steel coil into standard and custom length sheets. S&T Stainless recognised the need in the industry to assist designers, engineers, and fabricators, by giving them the ability to design and build with the added flexibility of a wide range of sheet sizes.
MATERIALS Materials commonly processed include: 304 2B, 304 BA, 304 Satin, 316 2B, 430 2B, 430 BA,, 430 Satin, and Deco patterned & embossed stainless steel. Other stainless steel material may be processed subject to prior arrangement.
COST SAVINGS Repetitive custom lengths reduce material wastage and labour costs, increase your workshop productivity, and reduce the risk of handling
damage. In the case of longer lengths you may be able to reduce the amount of welding and post fabrication labour costs.
SURFACE PROTECTION Polyethylene (PE) film can be applied to one or both sides to protect the material from incidental scratching. Various films are available on application to suit many different applications such as Laser Cutting, Deep Drawing, Perforating, Punching, Folding, etc. Our standard PE film is suitable for use by both Fibre and CO2 Laser Cutting equipment.
IDENTIFICATION Ink jet marking can be applied to the material or the protective film on request to identify material type, size, part numbers, or your company name for advertising purposes.
NO CONTAMINATION Stainless Steel dedicated – therefore no risk of cross metallic contamination.
MACHINE SPECIFICATIONS
Width up to 1524mm Thickness 0.45mm – 3.00mm Length various standard lengths to 5000mm, longer lengths by arrangement
LENGTH TOLERANCES
LENGTH THICKNESS PLUS MINUS 3000mm or less 0.45mm – 1.50mm 1.60mm 0mm
2.00mm 2.00mm 0mm
2.50mm 2.50mm 0mm
3.00mm 3.00mm 0mm
over 3000mm 0.1% of sheet length 0mm
SQUARENESS TOLERANCES (DIAGONAL)
LENGTH DIFFERENCE to 2000mm 3.00mm
to 3000mm 5.00mm
to 4000mm 6.00mm
over 4000mm 8.00mm
CUSTOMERS OWN MATERIAL
C.O.M. may be processed subject to prior arrangement on an all care, no responsibility basis. If risks or material faults are identified prior to processing customers are contacted prior to proceeding.
ADVERTISING If your completed job is covered by a protective film and will be in public view prior to commissioning e.g. lift doors and architraves? We can print your company name on to the protective film, then everyone will know who the manufacturer is!
Please contact your nearest S&T Stainless branch to discuss any requirements you may have outside these standards
A3
SATIN SHEET POLISHER New Zealand’s only commercial Stainless Steel Sheet Polisher giving the advantage of a consistent finish. All sheets supplied ex-stock are polished on the same machine, using the same settings.
POLISH We produce a satin (#4, brushed, or linished) finish. Pre-polish and in process inspection allows continual monitoring of quality. Although typically polished one side, we can produce exactly the same finish on both sides, on request. In comparison, mill polished material is reverse-ground and is likely to have a slightly different appearance to the prime polished side. A #5 finish is also achievable. Coarse polishes on the reverse side may be achieved for applications requiring a “key” for painting or for improved laminating (bonding) performance.
CONSISTENCY
If there is a chance that replacement panels may be required in the future, use our polish from the start. There are as many different finishes as there are polishers. We maintain a consistent set up, thereby enabling a closer match between sheets produced months or even years apart.
COST SAVINGS In the case of longer lengths a reduction in the amount of welding and post fabrication labour costs is achievable, as well as maintaining a consistent visual quality over the full length.
NO CONTAMINATION Only stainless steel and occasionally aluminium & brass are processed, using different polishing belts. Consequently there is no risk of cross metallic contamination.
SURFACE PROTECTION Polyethylene (PE) adhesive film can be applied to one or both sides to protect the material from incidental scratching. Various films are available on application to suit many different applications such as Laser Cutting, Deep Drawing, Perforating, Punching, Folding, etc. Our standard PE film is suitable for use by both Fibre and CO2 Laser Cutting equipment.
IDENTIFICATION Ink jet marking can be applied to the material or the protective film on request to identify material type, size, part numbers, or your company name for advertising purposes.
CUSTOMERS OWN MATERIAL
C.O.M. may be processed subject to prior arrangement on an all care, no responsibility basis. If risks or material faults are identified prior to processing customers are contacted prior to proceeding.
MACHINE SPECIFICATIONS WIDTH: up to 1524mm
THICKNESS: 0.70mm – 3.00mm for Stainless Steel 0-55mm Small quantities by arrangement 1.20mm – 3.00mm for Aluminium. & Brass
LENGTH: various standard lengths from 700mm to 5000mm, and by arrangement over 5000mm
INKJET PRINTER
IDENTIFICATION
When sheets are processed via our Cut to Length (Sheeting) Line or our Satin (Sheet) Polisher, we can print the grade, sheet size, part number, etc, on to the surface of the material (or the protective coating). Reduce lost production time from confusion over material grades, and part identification
A4 STAINLESS STEEL CATALOGUE
PE FILM APPLICATOR
To protect the quality of a stainless steel surface during fabrication, installation and commissioning, Polyethylene (PE) films are the answer. S&T Stainless has the ability to apply these films during the sheeting and polishing process, and also as a separate “one off” function. We regularly apply film to aluminium, copper and brass sheet to customer’s own material (C.O.M).
FILM VARIETIES
Many different combinations of film & adhesive types, film thickness, and adhesive levels, are available to suit the various processes metals are put through, e.g. Laser Cutting, Deep Drawing, Perforating, Punching, Folding, etc. Many of these films enable marker pens to be used for marking out fabrication details. Our standard PE film is suitable for use by both Fibre and CO2 Laser Cutting equipment.
COST SAVINGS Expensive re-polishing or re-manufacture can be avoided by using these very cost effective films.
IDENTIFICATION Ink jet marking can be applied to the protective film on request to identify material type, size, part numbers, or your company name for advertising purposes.
CUSTOMERS OWN MATERIAL
C.O.M. may be processed subject to prior arrangement on an all care, no responsibility basis. If risks or material faults are identified prior to processing customers are contacted prior to proceeding.
MACHINE SPECIFICATIONS
Width up to 1524mm
Thickness 0.55mm – 6.00mm
LENGTH BY ARRANGEMENT
Surface Finish for coating smooth cold rolled surfaces
DIE-COVER FILM
DIE-COVER FILM is a proven
and economical way to prevent die marks when using a press brake to form Stainless Steel, Aluminium, pre-finished or painted metals. Film life will vary with a number of factors such as the thickness of the metal being formed, the type of metal and the severity of the bend. While some customers forming light gauge aluminium are getting several hundred bends on a single piece of film, others forming heavy gauge stainless steel may get only a few bends.
Simply lay Die-cover film over the female die.
A5
SURFACE FINISHES – COIL, SHEET AND PLATE
µm = micron (1/1000th of a millimetre) Ra = Surface Roughness average, the arithmetic average of the absolute values of the roughness profile. Surface roughness figures shown are typical, and are only to be used as a guide. These figures can vary between different manufacturers and material thicknesses. Please contact S&T Stainless for assistance with specification and availability details.
MILL FINISHES
FINISH PROCESS TYPE SURFACE CONDITION NOTES
No 1 Hot rolled, annealed, and pickled.
Coarse finish with a dull grey appearance and low reflectivity. Typical surface roughness = 2 - 8 µm (Ra).
Most common hot rolled plate finish available. Not suitable for decorative applications.
2D Cold rolled, annealed, and pickled.
A semi-matt silver / grey surface. Smoother than No. 1 finish but rougher than 2B finish.
Due to the wide range of thicknesses available in 2B finish, 2D is no longer stocked.
2E Cold Rolled, Annealed, Shot Blasted, and Pickled.
A slightly coarse, silver / grey surface. Typical surface roughness = 2 - 4 µm (Ra)
Usually applied to stainless steel grades with a mill scale which is very resistant to pickling solutions - eg duplex and super-austenitic.
2B Cold rolled, annealed, pickled, and skin passed.
A semi-bright non reflective finish. Typical surface roughness = 0.10 - 0.50 µm (Ra).
Most widely used cold rolled finish available. Frequently used as an hygienic surface without further polishing. Often used as the basis for most polished and brushed finishes.
BA Bright annealed, followed by cold rolling with highly polished rolls.
Highly reflective finish, semi-mirror like. Very smooth. Typical surface roughness = 0.05 - 0.20 µm (Ra).
Usually supplied with protective film coating. Manufactured items usually require no further polishing before being put into service. Often used as the basis for coloured finishes.
SPECIAL FINISHES
FINISH PROCESS TYPE SURFACE CONDITION NOTES
Satin (No.4)
Mechanically polished abrasive finish, often referred to as "brushed" or "linished" finish.
A silver-like, metallic, satin finish with low reflectivity. Typical surface roughness = 0.20 - 1.50 µm (Ra).
Uniform, longitudinal, uni-directional polishing lines are "broken" to create a series of short scratches. A fine 120 - 240 grit abrasive finish suitable for architectural applications.
Satin (Low-Ra)
Satin polished sheet finish, with monitoring and recording of Ra measurements.
A silver-like metallic satin finish with low reflectivity. Typical surface roughness = 0.20 - 0.50 µm (Ra).
Polished by our NZ based stainless steel sheet polisher. Regular measurements recorded to guarantee a surface roughness of < 0.50 µm (Ra), suitable for exterior architectural applications.
Hairline Mechanically polished abrasive finish.
A silver-like metallic satin appearance. Typical surface roughness = 0.20 - 1.50 µm Ra)
Longitudinal polishing lines are "unbroken" creating a series of long hair-like scratches.
Super Mirror (No. 8)
Buff polished with soft cloth mops and special polishing compounds.
Ultra-smooth, highly reflective mirror finish. Typical surface roughness = 0.05 - 0.10 µm (Ra).
Mirror quality finish with no polishing lines remaining visible. Ideal for use as unbreakable mirrors and architectural features. This is the most resistant surface finish to "tea staining".
Patterned (Textured)
BA or Satin finishes receive an extra rolling from special imprinted or etched rolls.
3-dimensional 1 or 2 sided decorative patterns. eg Linen, Checks, 5WL, etc.
Rigidity and strength can be increased by as much as 50%, enabling thinner sheet to be used and reducing weight. Hard wearing and scratch resistant architectural finishes.
Granex® Bead blasted with fine, medium, or coarse glass beads.
Uniform, non-directional, low reflective surface.
Surface roughness to be specified at the time of ordering. Can also be coloured.
Coloured Electrolytic thickening of the chromium oxide layer (passive film) creates colours through light interference.
Colours - Bronze, Gold, Red, Purple, Blue, Green, Charcoal, & Black. Typically produced using BA, Satin, Mirror, and / or Patterned finishes.
As colours are not a pigment, they never fade or crack. No toxic fumes are emitted in fire conditions. Heat resistant to 200°C.
A6 STAINLESS STEEL CATALOGUE
STAINLESS STEEL PLATE – Manufactured to ASTM A240/480
PLATE DIMENSIONS mm
(THICKNESS X WIDTH X LENGTH)
THEORETICAL WEIGHT kgs / plate
304 316 3CR12 2205
(DUPLEX)
253 MA (HI
TEMP)
2B NO. 1 2B NO.1 NO. 1 2E 2E
4.00 x 1200 x 2400 92.16 •
•
4.00 x 1500 x 3000 144.00 • • •
• •
4.00 x 2000 x 4000 256.00 •
•
5.00 x 1200 x 2400 115.20 •
•
5.00 x 1500 x 3000 180.00 • • •
•
•
5.00 x 1500 x 6000 360.00 •
5.00 x 2000 x 4000 320.00 •
•
6.00 x 1200 x 2400 138.24 •
•
6.00 x 1500 x 3000 216.00 • • •
•
6.00 x 1500 x 6000 432.00
•
6.00 x 2000 x 4000 384.00 • • •
8.00 x 1500 x 3000 288.00 • •
•
8.00 x 2000 x 4000 512.00 • •
•
10.00 x 1500 x 3000 360.00
•
•
10.00 x 2000 x 4000 640.00
•
•
12.00 x 1500 x 3000 432.00
•
•
12.00 x 2000 x 4000 768.00
•
•
16.00 x 1500 x 3000 576.00
•
•
20.00 x 1500 x 3000 720.00
•
•
25.00 x 1500 x 3000 900.00
•
•
30.00 x 1500 x 3000 1080.00
•
•
38.00 x 1500 x 3000 1368.00
•
50.00 x 1500 x 3000 1800.00
•
- Other Sizes & Grades available on request
- Larger Sizes are available on Indent
- PE & Laser Coating Service available -
refer to page A4
- Mill Test Certificates available on request
- Satin Polishing available on request
- Plasma, Laser, & Water Jet cutting services
available on request
STAINLESS STEEL CHEQUER PLATE (TREAD PLATE)
PLATE DIMENSIONS mm
(THICKNESS X WIDTH X LENGTH)
THEORETICAL WEIGHT
kgs / plate
304
NO. 1
3.50 x 1219 x 2438 83.21 •
4.50 x 1219 x 2438 108.30 •
4.50 x 1219 x 3048 135.28 •
4.50 x 1500 x 3000 169.12 •
- Other Sizes & Grades available on Indent
A7
STAINLESS STEEL COIL – Manufactured to ASTM A240/480
SIZE mm
(Thickness x Width)
304 316 430 2304 2205
2B BA Satin 2B BA Satin 2E 2E
0.45 x 1219 •
0.55 x 915 •
0.55 x 1219 • • • • •
0.70 x 1219 • • • • • •
0.90 x 915 •
•
0.90 x 1219 • • • • •
0.90 x 1500/1524 •
1.20 x 915 • • •
1.20 x 1219 • • • • •
1.20 x 1500/1524 •
•
1.50 x 915 • • •
1.50 x 1219 • • • •
1.50 x 1500/1524 •
•
•
2.00 x 915 •
2.00 x 1219 •
•
2.00 x 1500/1524 •
•
•
2.00 x 2000 •
2.50 x 1219 •
•
2.50 x 1500/1524 •
•
2.50 x 2000 •
3.00 x 1219 •
•
3.00 x 1500/1524 •
•
•
3.00 x 2000 •
4.00 x 1500/1524 •
•
4.00 x 2000 •
Other Sizes & Grades available on request
PE & Laser Coated Coils available on request
For Cut-to-Length available - refer to page A2
For Physical and Mechanical Properties, and Steel Grade Chemical Composition please refer to Technical Section J.
SPECIAL GRADE COIL, SHEET AND PLATE NOW AVAILABLE EX-STOCK CONTACT YOUR NEAREST S&T STAINLESS BRANCH
A8 STAINLESS STEEL CATALOGUE
STAINLESS STEEL SHEET – Manufactured to ASTM A240
SHEET DIMENSIONS mm
(Thickness x Width x Length)
THEORETICAL WEIGHT
kgs / sheet
304 316 430
2B BA Satin Super Mirror
2B Satin - Low Ra
BA Satin
0.45 x 1219 x 2438 10.70 •
0.55 x 915 x 2438 9.82 •
0.55 x 1219 x 2438 13.08 • • •
•
• •
0.70 x 915 x 2438 12.49
•
0.70 x 1219 x 2438 16.64 • • •
• • • •
0.70 x 1219 x 3048 20.81 •
•
0.90 x 915 x 2438 16.06 • • •
0.90 x 915 x 3048 20.08 •
•
0.90 x 1219 x 2438 21.40 • • • • • • • •
0.90 x 1219 x 3048 26.75 • • •
•
0.90 x 1219 x 3658 32.11 • • •
0.90 x 1500 / 1524 x 3048 33.45 •
•
0.90 x 1500 / 1524 x 3658 40.13 •
•
1.20 x 915 x 2438 21.42 • • •
1.20 x 915 x 3048 26.77 • • •
1.20 x 915 x 3658 32.13 • • •
1.20 x 915 x 4000 35.13 • • •
1.20 x 915 x 4500 39.60
• •
1.20 x 915 x 5000 43.90
•
1.20 x 1219 x 2438 28.53 • • •
• • • •
1.20 x 1219 x 3048 35.67 • • •
• •
1.20 x 1219 x 3658 42.81 • • •
• •
1.20 x 1219 x 4000 46.80 •
•
1.20 x 1219 x 4500 52.60
•
1.20 x 1219 x 5000 58.51 • • •
1.20 x 1500 / 1524 x 2438 35.66 •
•
1.20 x 1500 / 1524 x 3048 44.50 •
•
• •
1.20 x 1500 / 1524 x 3658 53.51 •
•
•
1.50 x 915 x 2438 26.78 • • •
1.50 x 915 x 3048 33.47 • • •
1.50 x 915 x 3658 40.16 • • •
1.50 x 915 x 4000 43.92 •
•
1.50 x 915 x 5000 54.90 •
•
1.50 x 1219 x 2438 35.66 • • • • • •
1.50 x 1219 x 3048 44.59 • • •
• •
1.50 x 1219 x 3658 53.51 • • •
• •
1.50 x 1219 x 4000 58.51 •
•
1.50 x 1219 x 5000 73.14 •
•
1.50 x 1500 / 1524 x 2438 54.00 • •
1.50 x 1500 / 1524 x 3048 55.74 • • • •
1.50 x 1500 / 1524 x 3658 66.70 • • •
1.50 x 1500 / 1524 x 4000 73.15 • •
A9
STAINLESS STEEL SHEET – Manufactured to ASTM A240
SHEET DIMENSIONS mm
(Thickness x Width x Length)
THEORETICAL WEIGHT
kgs / sheet
304 316 430 3Cr12
2B BA Satin Super Mirror
2B Satin - Low Ra
BA Satin No.1
2.00 x 915 x 2438 35.69 • •
2.00 x 915 x 3048 44.62 •
2.00 x 915 x 3658 53.55 •
2.00 x 1219 x 2438 47.55 • • • • •
2.00 x 1219 x 3048 59.45 • • • •
2.00 x 1219 x 3658 71.35 • • •
2.00 x 1219 x 4000 78.01 •
2.00 x 1500 / 1524 x 3048 74.32 • • • •
2.00 x 1500 / 1524 x 3658 88.08 • • •
2.00 x 2000 x 4000 128.00 •
2.50 x 1219 x 2438 59.44 • • • •
2.50 x 1219 x 3048 74.31 • •
2.50 x 1219 x 3658 89.18 •
2.50 x 1500 / 1524 x 3048 92.90 • •
2.50 x 1500 / 1524 x 3658 111.50 •
2.50 x 2000 x 4000 160.00 •
3.00 x 1219 x 2438 71.33 • • • •
3.00 x 1219 x 3048 89.17 • •
3.00 x 1219 x 3658 107.00 •
3.00 x 1500 / 1524 x 3048 111.48 • • • • •
3.00 x 1500 / 1524 x 3658 132.12 • • •
3.00 x 1500 / 1524 x 4000 146.30 •
3.00 x 2000 x 4000 192.00 • •
Most 2B finish sheet sizes can be Satin polished by our Satin Sheet Polisher on request
Other Sizes & Grades available on request
Mill Test Certificates available on request
PE & Laser Coating Service Available - refer to page A4
For Cut-to-Length options please discuss with your nearest S&T Stainless branch
STAINLESS STEEL SHEET – SPECIAL GRADES
SHEET DIMENSIONS mm
(Thickness x Width x Length)
THEORETICAL WEIGHT
kgs / sheet
LDX 2101 (Lean Duplex)
2304 (Duplex)
2205 (Duplex)
253 MA (Hi Temp)
2E 2E 2E 2E
1.50 x 1500 x 3000 55.74
•
2.00 x 1500 x 3000 74.32 • • • •
3.00 x 1500 x 3000 111.48
• •
Other Sizes & Grades available on request
Other Special Grades available on indent include - 904L, 254 SMO, 654 SMO, 2507, 153 MA, & 353 MA.
Mill Test Certificates available on request
PE & Laser Coating Service Available - refer to page A4
For Physical and Mechanical Properties, & Steel Grade Chemical Composition please refer to Technical Section J
A10 STAINLESS STEEL CATALOGUE
PATTERNED AND ARCHITECTURAL SHEET
ARCHITECTURAL FINISHES AVAILABLE EX STOCK
DESCRIPTION SHEET DIMENSIONS
mm (Thickness x Width x Length)
THEORETICAL WEIGHT
kgs / sheet
304 316
BA Satin Mirror Satin
DECO
AN5 0.60 x 1250 x 1800 10.80 •
0.60 x 1250 x 2500 15.00 •
AN6 1.50 x 1250 x 2500 37.50 •
1.50 x 1250 x 3000 45.00 •
RIMEX
Super Mirror 1.00x 1219 x 2438 23.78 •
1.50x 1219 x 2438 35.66 •
Black Mirror 0.80 x 1250 x 2500 20.00 •
Charcoal Satin 0.80 x 1250 x 2500 20.00 •
Charcoal Pearl 0.60 x 1250 x 2500 15.00 •
Charcoal Prism 0.60 x 1250 x 2500 15.00 •
Gold Prism 0.60 x 1250 x 2500 15.00 •
5WL 0.55 x 1219 x 2438 13.08 •
1.20 x 1219 x 2438 28.53 • •
1.20 x 1219 x 3048 35.67 •
6WL 0.55 x 1219 x 2438 13.08 •
1.20 x 1219 x 2438 28.53 •
6WL - Aluminium 1.60 x 1200 x 2400 12.49 •
Cambridge 0.55 x 1219 x 2438 13.08 •
IR3 0.90 x 1219 x 2438 21.40 •
Canvas 0.80 x 1250 x 2500 20.00 •
1.20 x 1250 x 2438 29.26 •
1.20 x 1250 x 3048 36.58 •
1.20 x 1250 x 3658 43.90 •
1.20 x 1250 x 5000 60.00 •
Linen 0.80 x 1250 x 2500 20.00 •
1.20 x 1250 x 2438 29.26 •
1.20 x 1250 x 3048 36.58 •
1.20 x 1250 x 3658 43.90 •
1.20 x 1250 x 5000 60.00 •
Squares 0.80 x 1250 x 2500 20.00 •
1.20 x 1250 x 2438 29.26 •
1.20 x 1250 x 3048 36.58 •
1.20 x 1250 x 3658 43.90 •
1.20 x 1250 x 5000 60.00 •
Checks 0.80 x 1250 x 2500 20.00 •
1.20 x 1250 x 2438 29.26 •
1.20 x 1250 x 3048 36.58 •
1.20 x 1250 x 3658 43.90 •
1.20 x 1250 x 5000 60.00 •
Satin • •
• Denotes a typical NZ stock item - subject to prior sale.
Contact our Architectural Products Manager for availability of other grades, patterns, metal types, & finishes.
Sheets may be reserved for specific projects, please contact our Architectural Products Manager for assistance.
Some patterns can be supplied Cut-To-Length from coil, please discuss with your nearest S&T Stainless branch
Some patterns are held in limited quantities, please check availability before specifying or quoting.
See our Architectural Products catalogue for further options and more details.
A11
PATTERNED AND ARCHITECTURAL SHEET
ARCHITECTURAL FINISHES AVAILABLE EX STOCK
AN5 - Brushed AN6 - Brushed 5WL – BA Finish 6WL – BA Finish
Linen - BA Finish Canvas - BA Finish Squares - BA Finish Check – BA Finish
Cambridge – BA Finish
IR3 – Satin Finish Charcoal Prism Charcoal Pearl
Super Mirror - #8 Finish Black Mirror Charcoal Satin Gold Prism
WHY USE TEXTURED FINISHES?
Helps to hide scratches, dents, and other impact damage, unlike plain flat surfaces.
Improves the optical flatness of the material, along with reducing glare.
Patterning process improves the materials strength by up to 50%, enabling thinner (lighter) sheets to be used.
Increased life expectancy reduces frequency of costly replacement, ultimately saving costs.
Stainless steel's fire resistance, along with being 100% recyclable, makes it an ideal construction material.
See page A12 for suggested applications for textured stainless steel.
See our Architectural Products catalogue for further options and more details.
A12 STAINLESS STEEL CATALOGUE
PATTERNED AND ARCHITECTURAL SHEET
ARCHITECTURAL FINISHES AVAILABLE ON REQUEST
DESCRIPTION
SHEET DIMENSIONS mm
(Thickness x Width x Length)
THEORETICAL WEIGHT
kgs / sheet
304
BA Satin Mirror
RIMEX PATTERNS
2WL 0.60 x 1250 x 2500 15.00 •
7GM 0.60 x 1250 x 2500 15.00 •
13SD 0.60 x 1250 x 2500 15.00 •
Blue Pearl 0.60 x 1250 x 2500 15.00 •
Cambridge 0.55 x 1219 x 2438 13.08 •
Charcoal Pearl 0.60 x 1250 x 2500 15.00 •
Green Pearl 0.60 x 1250 x 2500 15.00 •
Charcoal Pinstripe 0.60 x 1250 x 2500 15.00 •
Green Pinstripe 0.60 x 1250 x 2500 15.00 •
Blue Pippin 0.60 x 1250 x 2500 15.00 •
Bronze Pippin 0.60 x 1250 x 2500 15.00 •
Gold Poppy 0.60 x 1250 x 2500 15.00 •
Charcoal Prism 0.60 x 1250 x 2500 15.00 •
Gold Prism 0.60 x 1250 x 2500 15.00 •
Blue Pyramid 0.60 x 1250 x 2500 15.00 •
Charcoal Pyramid 0.60 x 1250 x 2500 15.00 •
Gold Pyramid 0.60 x 1250 x 2500 15.00 •
COLOURED MIRROR & SATIN FINISHES AVAILABLE EX STOCK
DESCRIPTION
SHEET DIMENSIONS mm
(Thickness x Width x Length)
THEORETICAL WEIGHT
kgs / sheet
304
BA Satin Mirror
RIMEX COLOURS
Plain Super Mirror 1.50x 1219 x 2438 35.66 •
Blue 0.80 x 1250 x 2500 20.00 •
Bronze 0.80 x 1250 x 2500 20.00 • •
Gold 0.80 x 1250 x 2500 20.00 •
Green 0.80 x 1250 x 2500 20.00 •
Contact our Architectural Products Manager for availability of other grades, patterns, metal types & finishes.
Sheets may be reserved for specific projects, please contact our Architectural Products Manager for assistance.
Colours may vary between batches, please contact our Architectural Products Manager for assistance with your project.
Coloured materials are held in limited quantities, please check availability before specifying or quoting.
APPLICATIONS FOR TEXTURED AND COLOURED STAINLESS STEEL
Kitchen Bench Tops Splash Backs Elevator Doors Lift Interiors Escalator Cladding Toilet Partitions Interior Wall Cladding Building Facades Ceiling Panels Column Cladding
Passenger Terminals Airport Benches Baggage Conveyors Footbridges Protective Cladding Doors Canopies Architraves Edge Protection Tiles & Trims
Supermarket Counters Shop Fitouts Shop Fronts Architectural Features Signs Bars and Counters Refrigerators Food Display Cabinets Point of Sale Displays Exhibition Stands
Bus & Train Fitouts Fast Food Outlets Mobile Catering Trailers Caravans & Mobile Homes Trailers & Horse Floats Food Processing Machinery Conveyors & Chutes Street Furniture Planter Boxes Sculptures
See our Architectural Products catalogue for further options and more details.
A13
PATTERNED AND ARCHITECTURAL SHEET
ARCHITECTURAL FINISHES AVAILABLE ON REQUEST
Green Pearl Charcoal Pearl Blue Pearl Charcoal Prism Gold Prism
Blue Pyramid Charcoal Pyramid Green Pinstripe Charcoal Pinstripe Bronze Pippin
Blue Pippin 2WL - BA Finish 7GM - BA Finish 13SD - BA Finish Cambridge BA Finish
Bronze Satin Blue Mirror Bronze Mirror Gold Mirror Green Mirror
WHY USE COLOURTEX™ FINISHES?
Colours are not a coating and will not fade. They are colour fast up to 200°C.
Colourtex™ material will not emit poisonous fumes during a fire, as the colour is inherently part of the stainless steel.
By combining the various colours and patterns, 100's of different effects can be obtained from the manufacturer.
For advice on vandal resistance (Low, Medium, or High), contact our Architectural Products Manager.
Increased life cycle provides long term cost savings.
Colourtex™ colouring process allows the material to remain 100% recyclable
See our Architectural Products catalogue for further options and more details.
A14 STAINLESS STEEL CATALOGUE
STAINLESS STEEL WIRE MESH – PLAIN WEAVE
Grade: 304
Mesh No.: Indicates the number of mesh (holes) within a lineal inch.
Wire Dia: Wire diameter.
Aperture: Distance between parallel wire threads, measured in mm.
Open Area: Gives the percentage of open area in a standard wire mesh.
NB For aperture dimensions in microns - 1mm = 1000 microns
MESH NO WIRE DIA.
(mm) APERTURE
(mm) OPEN AREA
(%) WEIGHT (kg/m²)
ROLL WIDTH (mm)
ROLL LENGTH
(m)
4 0.890 5.46 74.0 1.53 1220 30
6 0.810 3.43 65.6 1.91 1220 30
6 1.190 3.05 51.8 4.11 1220 30
8 0.890 2.29 51.8 3.07 1000 30
10 0.584 1.96 59.3 1.65 1000 30
12 0.584 1.52 51.8 1.98 1220 30
16 0.457 1.13 50.7 1.62 1220 / 1500 30
20 0.406 0.86 46.2 1.60 1220 30
22 0.340 0.81 49.6 1.23 1500 30
30 0.229 0.62 53.1 0.76 1220 30
40 0.203 0.43 46.2 0.77 1220 30
60 0.140 0.28 44.4 0.57 1000 30
80 0.121 0.20 38.8 0.60 1000 30
100 0.101 0.153 36.0 0.48 1000 300
– Sold per Lineal metre, cut across the width of the roll. Minimum order 1 lineal metre.
– Other sizes, weave patterns, and Grade 316 can be sourced on request.
STAINLESS WIRE MESH – WELDED (COILS)
Grade: 304
Mesh No.: Indicates the number of mesh (holes) within a lineal inch.
Wire Dia: Wire diameter.
Aperture: Distance between parallel wire threads, measured in mm.
Open Area: Gives the percentage of open area in a standard wire mesh.
– Sold per Lineal metre, cut across the width of the roll. Minimum order = 1 lineal metre.
– Other sizes, weave patterns, and Grade 316 can be sourced on request.
STAINLESS WIRE MESH – HEAVY GAUGE WELDED (SHEETS)
Supplier’s range includes: Wire diameters from 2 - 6mm
Square / Pitch dimensions (wire spacings - centre to centre in mm) from 25 -304 and 316 stainless steel is available in some instances.
Sourced to Order - Please check availability
MESH NO WIRE DIA.
(mm) APERTURE
(mm) OPEN AREA
(%) WEIGHT (kg/m²)
ROLL WIDTH (mm)
ROLL LENGTH
(m)
2 1.190 11.51 82.1 1.37 1000 30
4 0.810 5.54 76 1.27 1000 30
A15
STAINLESS STEEL PERFORATED SHEET
HOW TO ORDER Information Required:
1. Material grade and surface finish
2. Sheet thickness (mm)
3. Sheet width (mm)
4. Sheet length (mm)
5. Pitch (hole spacings - centre to centre in mm)
6. Hole diameter (mm)
7. Shape of hole - round, square, slotted, etc
8. Margin size (mm)
9. Stagger of pattern - e.g. 45°, 60°, or square
10. Quantity of sheets
Stairwell surround – clad with colour stainless steel which has been perforated and corrugated
APPLICATIONS:
Acoustic Panels Wall & Ceiling Linings Decorative Panels Architectural Features Shop Fitouts Street Furniture
Sourced to Order - Please check availability Sun Screens Balustrades Fences Facades
STAINLESS STEEL EXPANDED METAL HOW TO ORDER Information Required: LWD Long Way of Diamond (mm) SWD Short Way of Diamond (mm)
T Material Thickness (mm) S Strand Width (mm)
R or F Raised or Flattened Pattern (Raised = Rigid, Flattened = Flexible) 1 Sheet width and length (mm) 2 Material grade 3 Quantity of sheets
Sourced to Order - Please check availability
APPLICATIONS Industrial Walkways Panels Sun Screens Anti-slip Tread Grilles Security Fences Machine Guards Frying Baskets Vermin Proofing
S&T STAINLESS Head Office 7 Bruce Roderick Drive East Tamaki Auckland 2013 P +64 9 271 1780 F +64 9 271 1970
CONTACT US TODAY: 0800 426 787 www.stainless.steelandtube.co.nz
