Product End-of-Life Disassembly Instructions...External electrical cables and cords 0 Gas Discharge Lamps 0 Plastics containing Brominated Flame Retardants weighing > 25 grams (not

EL-MF877-00 Page 1

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs

Marketing Name / Model [List multiple models if applicable.]

HP ProBook 6460b Notebook PC

Name / Model #2

Name / Model #3

Name / Model #4

Name / Model #5

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.

Item Description Notes

Quantity of items included in product

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

With a surface greater than 10 sq cm

6

Batteries All types including standard alkaline and lithium coin or button style batteries

2

Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries

0

Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm

Includes background illuminated displays with gas discharge lamps

1

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height

0

External electrical cables and cords 0

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above)

0

Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent chambers, and service stations.

0

Components and waste containing asbestos 0

EL-MF877-00 Page 2

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Components, parts and materials containing refractory ceramic fibers

0

Components, parts and materials containing radioactive substances

0

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.

Tool Description Tool Size (if applicable)

Description #1 Cross head of screwdriver

Description #2 TORX T8 (2.31mm)

Description #3

Description #4

Description #5

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Follow steps described in Disassembly instruction (file attached) 2. If parts can be removed without using a tool, remove it first. 3. Use correct screwdriver and torque value before unlock the screw. 4. 5. 6. 7. 8.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).

MANUFACTURING PROCESS INSTRUCTIONS

MECHANICAL ASSEMBLY

0.10

Station Version Station Version Station Version Station Version Station Version Station Version

1 0.10 11 0.10 21 0.10 31 0.10 41 0.10

2 0.10 12 0.10 22 0.10 32 0.10 42 0.10

3 0.10 13 0.10 23 0.10 33 0.10 43 0.10

4 0.10 14 0.10 24 0.10 34 0.10 44 0.10

5 0.10 15 0.10 25 0.10 35 0.10 45 0.10

6 0.10 16 0.10 26 0.10 36 0.10 46 0.10

7 0.10 17 0.10 27 0.10 37 0.10 47 0.10

8 0.10 18 0.10 28 0.10 38 0.10 48 0.10

9 0.10 19 0.10 29 0.10 39 0.10 49 0.10

10 0.10 20 0.10 30 0.10 40 0.10

Station Ver.

ALL 0.1*

Revision:

Date: 2011/1/30 Page: 1 of 47

Written by:

Sub-assembly name: CT11 FA DIS ASS'Y B SOP

Document No.: CT11 FA DIS ASS'Y B SOP

Date Content Design

A.Current station version list:

B.Version Modify list:

牟世芹

2011/1/30 首份DIS SOP制作 Jin,Benny

审核：制表：牟世芹

MODEL : CT11

Notes ︰if finding anything uncommon, notice foreman or assistant at once.

Standard Operation Procedure

Document No. : CT11 FA DISASS'Y B SOP Station:

Name : Ver. : Date:

holding fixture list (holding fixture standard) Qty holding fixture list (holding fixture standard) Qty

Tabulator： Issuing department：

Step：

Mo Shi qing IE

Disassemble battery

1. Fetch battery from groove .Pull safe lock to left end ,make it unlocked(figure1)。

1(1/1)

0.10 2011/01/30

Security lock

figure1




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble Cover

1. Poke at cover Knob to right end ,disassemble it

2(1/1)

0.10 2011/01/30

Poke at cover Knob to left end and tighten it




Name : Ver. : Date:



Step：

Mo Shi qing IE

Pull down fan screw

1. Pull down fan screws * 2.

2. Pull down fan cable from M/B and fetch fan;

Torque：2.0 ± 0.2 Kgf．cm

3(1/1)

十字电动起子(1#) 1

0.10

1

2

gasket

2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Unlock Lower shell K/B screw

1. K/B SET screws * 3。 Torque：2.0 ± 0.2 Kgf．cm

Screw can’t strip and idle running,

Don’t allow the screw to fall inside machine.

4(1/1)

Electric cross screw driver(1#) 1

0.10

2

1

3

2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble Keyboard

1.Disassemble K/B all groove around and bosom

5(1/1)

0.10

图一

2011/01/30

figure1




Name : Ver. : Date:



Step：

Mo Shi qing IE

Pull down FFC

1. . Pull down insert K/B FPC in MB CNTR , picture 2 3 4.

K/B FPC need to pre-fold if not (figure4)

2.Pull down stick point FFC from K/B(figure1). For 4key button Top Case need to pull down FFC,

2key have no FFC

6(1/1)

0.10

图一

图四

2011/01/30

Pre-fold FFC

figure1

figure2

figure3

figure4




Name : Ver. : Date:



Step：

Mo Shi qing IE

Turn machine

1. Turn machine and open

7(1/1)

0.10

图一

2011/01/30

figure1




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble HDD and unlock screw

1.Unlock HDD SET *3.


Screw can’t strip and idle running,

Don’t allow the screw to fall inside machine.

2.Fetch the label from HDD.

8(1/1)

十字电动起子 (0#) 1

0.10

1

2

3Fetch

2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Unlock screws

1. Unlock thermal SET screws 2 grains Torque：1.5 ± 0.2 kgf. cm

Screw can’t strip and idle running

9(1/1)


0.10 2011/01/30

Intel DIS 6043B0090001THERMAL MODULE,HURON RIVER,DISCRETE,45.0W,15.0W,CHIPSET DOWNWARD

Intel DIS

SIM card 1

figure1




Name : Ver. : Date:



Step：

Mo Shi qing IE

Unlock screws

1. Lock thermal SETscrews4grains Torque：2.0 ± 0.2 Kgf．cm

screws can’t be stripped and idle running, can’t drop in units.

10(1/1)


0.10 2011/01/30

Intel DIS 6043B0090001THERMAL MODULE,HURON RIVER,DISCRETE,45.0W,15.0W,CHIPSET DOWNWARD

Intel UMA6043B0090101

THERMAL MODULE,HURON RIVER,UMA,45.0W,CHIPSET DOWNWARD

AMD UMA 6043B0093401THERMAL MODULE,HURON RIVER,UMA,CHIPSET DOWNWARD

1

2

3

4 2

3

4

1

1 3

4 2

Intel UMA

AMD UMA

Intel DIS




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble CPU

1. Fetch Mylar from CPU (picture 2 3)Intel model Mylar material No： 6054B0944401AMD model Mylar material No ：6054B0968001

2. Unlock scow and disassemble CPU from CPU SOCKET .

(Unlock and enclose counterclockwise

ONLY FOR INTEL 4core和 AMD all models, INTEL 2core not paste

3. Take CPU used the vacuum suction pen.

11(1/1)

One-line screw driver 1

Suction pen 1

Ion fan 1

0.10

图二

AMD model

triangle

figure2

Intel model

trianglefigure1

Four core

Double core

2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble WWAN Cable

1. Disassemble WWAN Cable * 2。（figure3）

Five pairs line MAIN , six pairs line AUX

12(1/1)

Routing chopstick 1

0.10 2011/01/30

figure3




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble WWAN card

13(1/1)

Electric cross screw driver(#0) 1

0.10 2011/01/30

1. Unlock screws (6052A0004501) * 2 Torque：2.0± 0.2Kgf．cm Screw can’t strip and idle running

no WLAN no station2.Disassemble WWAN card on M/B。3.Fetch label from WWAN card




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble WLAN Cable

1. Disassemble WLAN Cable*2(1fix black cable;2 fix white cable)

14(1/1)

Routing Chopstick 1

0.10 2011/01/30

CN0

CN1

CN2




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble WLAN card

1. Unlock screws (6052A0004501) * 2, torque：1.5 ± 0.2 kgf. cm Screw can’t strip and idle running

no WLAN need not the station

2. Disassemble WLAN card on M/B。

3. Fetch label from WLAN

15(1/1)

Electric cross screw driver(#0) 1

0.10 2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble HDD and unlock screws

1. . Unlock HDD SET screws * 3。 Torque：2.0 ± 0.2 Kgf．cm

Screw can’t strip and idle running .

allow the screw to fall inside machine.

2. Disassemble HDD from HDD groove of BTCB 3. Fetch label from HDD

16(1/1)


0.10

1

2

3stuff

2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble HDD

1. Disassemble HDD from HDD Bracket(6053B0665601), unlock screws (6052B0131801) * 4 on fixture


Screw can’t strip and idle running , not drop into machine。

17(1/1)


screw provider 1

assemble HDD fixture 1

0.10 2011/01/30

figure1




Name : Ver. : Date:



Step：

Mo Shi qing IE

1. Unlock screws (6052A0004501) * 3。

Torque：1.0 ± 0.2 Kg/cm


Tighten screw by flowing water line

Disassemble Modem

Electric cross screw driver (0#) 1

18(1/1)

0.10

1

2

2011/01/30

3

http://www.iec.inventec/sites/NPI/NPISE/Shared Documents/工具及標準表格/SOP Process.ppt




Name : Ver. : Date:



Step：

Mo Shi qing IE

1. Disassemble Modem from M/B.

label need to fold opposite and paste on Modem

2 . Fetch label from Modem.(figure 1)

Disassemble Modem

19(1/1)

0.10 2011/01/30

figure1

figure2

figure4figure3




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble Bluetooth

1. Pull down BT cable CNTR and bond M/B

2. Pull down Bluetooth and bond Cable(6017B0290301)

20(1/1)

0.10

INSERT CNTR

Bluetooth iron out

2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Unlock BTCB Screws

1.Unlock BTCB screw (6052B0067802) X1

1 NO. screw hole


Screw can’t strip and idle running 。

2. Unlock BTCB screw (6052A0004501) X2

2 3 NO. screw hole



21(1/1)

0.10

如图一

123figure1

Electric cross screw driver 1

2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Unlock Hinge screw

1. Unlock Hinge screw (6052B0155201) X4


Screw can’t strip and be idle running 。

22(1/1)

0.10 2011/01/30

Electric plum blossom screw driver T8) 1

Support fixture 1

2

3

1

4




Name : Ver. : Date:



Step：

Mo Shi qing IE

Unlock Hinge screw

1. Tighten Hinge screw (6052B0155201) X4



23(1/1)

0.10 2011/01/30


Support fixture 1

2

3

1

4




Name : Ver. : Date:



Step：

Mo Shi qing IE

Unlock BTCB screw

1.Unlock BTCB screws (6052B0155201) X4Torque：2.0± 0.2Kgf．cm Screw can’t strip and idle running

lock according to water line

24(1/1)

0.10

1

2

3

4

图一

2011/01/30





Name : Ver. : Date:



Step：

Mo Shi qing IE

Unlock BTCB screw

1. Unlock BTCB screws (6052B0155201) X4Torque：2.0± 0.2Kgf．cm Screw can’t strip and idle running

lock according to water line

25(1/1)

0.10

1

2

3

4


2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Unlock screws (For HDD Cradle models)

For HDD Cradle model

1. Unlock screws (6052B0131801)*4Torque：2.0± 0.2Kgf．cm Screw can’t strip and idle running

26(1/1)


0.10 2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble ODD and unlock screw

For HDD Cradle model as figure2 shows

1. Unlock SET screw*1 Torque：2.0 ± 0.2 Kgf．cm


2. take HDD Cradle and pull out ODD groove

3. Take HDD Cradle, fetch nine compounded one label

For ODD model as figure1 shows

1. Unlock ODD SET screw *1 Torque：2.0 ± 0.2 Kgf．cm

Screw can’t strip and idle running2. Disassemble ODD and pull out ODD groove

3. Take ODD and fetch nine compounded one label.

27(1/1)


0.10 2011/01/30

figure1 figure2




Name : Ver. : Date:



Step：

Mo Shi qing IE

Unlock BTCB screw and fetch SPK CNTR

1. Fetch speaker CNTR from M/B,.2. Unlock ODD screws (6052B0101901)*2 Torque：2.0± 0.2Kgf．cm Screw can’t strip and idle running

28(1/1)


0.10 2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble BTCB

1. Disassemble BTCB , first disassemble left

angle ,picture1。

29(1/1)

0.10 2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

1. (For F/P model)Pull down F/P FFC （figure1）

Pull down F/P FFC 0.10 2011/01/30

30(1/1)

figure1




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble DDR

1. Disassemble all DDR on M/B

31(1/3)

0.10 2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Notice for take DDR

1. . Every time they can also take place 1PCS RAM, taking place at the time, can pinch your fingers on both sides of RAM, such as Figure 1.

31(2/3)

GOODfigure1

0.10 2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Notes to fetch DDR

1. RAM must be disassembled pinch with your fingers on both sides of the Finger. Tilted 45 degrees onto CNTR (Figure 1), so that unclamp SLOTRAM, can also be pulled with both hands tight to the inside (Figure 2).

31(3/3)

figure1

figure2

GOOD

GOOD

0.10 2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble Hall sensor /B

1,Disassemble Hall sensor Board from TPCB , as figure

2.Pull down acetic tape (6054A0076201)*1 from FFC

32(1/1)

0.10

圖一

2011/01/30




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble line

1.Insert Hall sensor/B FFC in CNTR

2 Assemble all lines in groove

33(1/1)

0.10 2011/01/30

FFC 90 degree angle




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble LCM cable and camera cable

1.Pull down LCM cable , disassemble it from the slot

2. Pull down camera cable

34(1/1)

0.10 2011/01/30

GOOD NG

figure2

figure1




Name : Ver. : Date:



Step：

Mo Shi qing IE

1, Unlock screws (6052B0101901) * 2。Picture 1 Torque：2.0± 0.2Kgf．cm Screw can’t strip and idle running

Unlock them in line order

2.Pull down battery (picture2)

Disassemble little battery and unlock screws

35(1/1)

0.10 2011/01/30

12


figure1 figure2




Name : Ver. : Date:



Step：

Mo Shi qing IE

1 . Unlock screws(6052A0004501)*1(picture3 )

Torque：1.0± 0.2Kgf．cm

2. Pull down orientation pole from M/B

3. Pull down Audio jack hole

Disassemble MB

36(1/1)

0.10 2011/01/30

圖二

1394 position

Audio jack

figure1

figure2


figure3




Name : Ver. : Date:



Step：

Mo Shi qing IE

1. Pull down M/B label from DDR and flow card

Fetch M/B label

37(1/1)

0.10 2011/01/30

figure1




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble RJ11

1. Disassemble RJ11 cable(6017B0314901)

2. Disassemble line and pull down acetic tape(6054A0076201)*1 to fix it (figure1,figure2)

no RJ11 model disassemble RJ11 Dummy (6051B0628201)(figure3)

38(1/1)

0.10 2011/01/30

figure3figure2

figure1

Tape can not cover the groove




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble line

1.Disassemble cable and fetch acetic

tape(6054A0076201)*1 to pull down cable

2. Disassemble Speaker cable from groove, turn it over to back

39(1/1)

0.10 2011/01/30

figure1

Acetic tape

Cable is out on left up angle




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble Speaker and unlock screw

1. Take BTCB on fixture unlock screws(6052A0004501) * 2，as figure2 shows。



Tighten by water line direction

do not press speaker tympanum

2.Disassemble Speaker (6039B0045501) *1 from BTCB as figure1 shows

40(1/1)

0.10

figure1

figure2

1

2

2011/01/30


Speaker tightening support fixture 1

Do not press




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble ANTENNA CABLE

41(1/1)

0.10 2011/01/30

1,Disassemble red and blue cable from groove

Paste red and blue label

red line on left side

all lines are covered under boss




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassemble ANTENNA CABLE

42(1/1)

0.10 2011/01/30

1, Disassemble white and black label

Black and white lines on right groove Fetch black and white labels




Name : Ver. : Date:



Step：

Mo Shi qing IE

1. Unlock (6052B0101901) * 2,below picture 2,3。 Torque：1.5 ± 0.2 kgf. cm

Screw can’t strip and idle running。

2. Use spanner to pull it out orientation holes

3. Put LCM and TPCB in support fixture

Pull Hinge and tight screw

43(1/1)

0.10 2011/01/30

support fixture 1

1

2

Figure1

Figure2 Figure3


spanner 1

Empty bridge 1




Name : Ver. : Date:



Step：

Mo Shi qing IE

Disassembly TPCB,LCM

1.Disassemble LCM from the TPCB（picture 2）

first put LCM in the latch hole

44(1/1)

0.10 2011/01/30

Figure1

Figure2

Latch 孔