Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
EL-MF877-00 Page 1 Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions Product Category: Personal Computers
Marketing Name / Model [List multiple models if applicable.] HP ProOne 600 G2 21.5-in Touch All-in-One PC Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description Notes
Quantity of items included in product
Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)
With a surface greater than 10 sq cm Part39,Part41,Part42,Part43,Part44,Part47,Part71,Part82, Part83,Part123,Part132,Part145,Part159,Part172
14
Batteries All types including standard alkaline and lithium coin or button style batteries Part49(CR2032)
1
Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm
Includes background illuminated displays with gas discharge lamps Part89(LED displays,no lamps)
1
Cathode Ray Tubes (CRT) 0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height
Part165(Electrolytic Capacitor) 1
External electrical cables and cords Part147(KB),Part160(Mouse),Part173(Power Cord) 3 Gas Discharge Lamps 0 Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above)
0
Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent chambers, and service stations.
0
EL-MF877-00 Page 2 Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components and waste containing asbestos 0 Components, parts and materials containing refractory ceramic fibers
0
Components, parts and materials containing radioactive substances
0
2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if
applicable) Screwdriver, Lever, Star Screwdriver(six) NA Slanted Pliers, Pliers NA Hammer NA Knife NA 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. AIO PC 2. LCD 3. Thermal Fan 4. ODD 5. HDD 6. Keyboard 7. Mouse 8. Power Adapter and Cable
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
A
1 Screw
Metal 9.3
Snap,
Adhesive,
Screw
Screwdriver,
Lever,
Slanted pliers,
Pliers
420
2 Spring
Metal 0.8
3 Nut
Metal 0.8
4 Plastic case
Plastic 41.9
5 Plastic piece
Plastic 18.6
6 Plastic case
Plastic 40.3
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
A
7 Plastic piece
Plastic 0.8
8 Plastic piece
Plastic 14.7
9 Metal case
Metal 179.7
10 Plastic piece
Plastic 6.6
11 Plastic piece
Plastic 16
12 Metal case
Metal 358
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
A
13 Plastic case
Plastic 48.5
14 Plastic piece
Plastic 6.9
15 Plastic case
Plastic 53.1
16 Plastic case
Plastic 454.7
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
B
17 Screw
Metal 50.4
Plug, Solder,
Adhesive,
Screw
Screwdriver,
Lever,
Star Screwdriver (six),
Slanted pliers,
Knife
900
18 Nut
Metal 0.6
19 Spring
Metal 0.4
20 Metal piece
Metal 0.3
21 Spring
Metal 0.9
22 Plastic ring
Plastic 0.3
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
B
23 Metal piece
Metal 0.2
24 Conductive
Anti-Static Foam
Mix 1.6
25 Metal piece
Metal 3.8
26 PCBA
0.8cm*8.1cm=6.5cm2
PCBA 2.4
27 Plastic piece
Plastic 0.5
28 Plastic piece
Plastic 0.4
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
B
29 Metal piece
Metal 9.6
30 Metal piece
Metal 13.1
31 SATA cable
Cable/wire 27
32 LVDS cable
Cable/wire 11.2
33 IO cable
Cable/wire 8.6
34 Converter cable
Cable/wire 5.4
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
B
35 Webcam cable
Cable/wire 1.2
Part 39 is a
PCBA. The
surface of
part 39 is
greater than
10 square
centimeters.
According to
WEEE (recast)
directive, part
39 requires
selective
treatment.
36 Antenna cable
Cable/wire 3.6
37 Backlight cable
Cable/wire 1.1
38 Touch control
cable
Cable/wire 1.4
39 CPU
3.7cm*3.7cm=
13.7cm2
PCBA 29.2
40 Wireless card
3cm*2.2cm=6.6cm2
PCBA 2.6
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
B
41 Memory1
6.8cm*3cm=20.4cm2
PCBA 7.8
Part
41.42.43.44 is
a PCBA. The
surface of
part
41.42.43.44 is
greater than
10 square
centimeters.
According to
WEEE (recast)
directive, part
41.42.43.44
requires
selective
treatment.
42 Memory2
6.8cm*3cm=20.4cm2
PCBA 7.8
43 PCBA
7.5cm*4cm=30cm2
PCBA 23.2
44 PCBA
6cm*4cm=24cm2
PCBA 12.1
45 Metal plank
Metal 62.8
46 Plastic sheet
Plastic 0.7
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
B
47 Main board
26.8cm*17.5cm=
469cm2
PCBA 259.4
Part 47 is a
PCBA. The
surface of
part 47 is
greater than
10 square
centimeters.
According to
WEEE (recast)
directive, part
47 requires
selective
treatment.
Part 49 is a
battery.
According to
WEEE (recast)
directive, part
49 requires
selective
treatment.
48 Plastic pad
Plastic 0.9
49 Cell battery
Battery 3
50 Plastic sheet
Plastic 0.1
51 Plastic sheet
Plastic 0.1
52 Metal case
Metal 273
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
B
53 Plastic piece
Plastic 6.8
54 Plastic piece
Plastic 2.3
55 Metal case
Metal 316.8
56 Plastic case
Plastic 57.2
57 Plastic piece
Plastic 4.6
58 Heat Sink
Metal 162.8
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
B
59 Plastic case
Plastic 39.7
60 Plastic case
Plastic 44.8
61 Plastic case
Plastic 18.1
62 Plastic case
Plastic 29.8
63 Plastic piece
Plastic 6.9
64 Plastic piece
Plastic 6.2
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
B
65 Speaker
Mix 67.8
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
C
66 Screw
Metal 4.7
Adhesive,
Screw
Lever,
Slanted pliers,
Knife
900
Part 71 is a
PCBA. The
surface of
part 71 is
greater than
10 square
centimeters.
According to
WEEE (recast)
directive, part
71 requires
selective
treatment.
67 Conductive
Anti-Static Foam
Mix 0.2
68 Plastic pad
Plastic 0.8
69 Nut
Metal 3.9
70 Tape
Plastic 19.2
71 Touch control
7.8cm*1.6cm=
12.4cm2
PCBA 4.2
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
C
72 Plastic case
plastic 82
73 Plastic piece
Plastic 44.5
74 Metal piece
Metal 40.7
75 Touch Panel
FPCA/glass 516.8
76 Metal plank
Metal 1304
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
D
77 Label
Plastic 0.6
Snap,
Adhesive,
Screw
Screwdriver,
Knife 600
Part 82 is a
PCBA. The
surface of
part 82 is
greater than
10 square
centimeters.
According to
WEEE (recast)
directive, part
82 requires
selective
treatment.
78 Screw
Metal 0.2
79 Tape
Plastic 1.3
80 Plastic sheet
Plastic 3.9
81 Textile
Mix 4.1
82 PCBA
PCBA 3.1
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
D
83 PCBA
PCBA 15.9
Part 83 is a
PCBA. The
surface of
part 83 is
greater than
10 square
centimeters.
According to
WEEE (recast)
directive, part
83 requires
selective
treatment.
84 Film
Plastic 38.8
85 Film
Plastic 24.9
86 Film
Plastic 20.5
87 Plastic piece
Plastic 330.5
88 Film
Plastic 29
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
D
89 LCD
LCD 399.5
Part 89 is a
LCD. The
surface of
part 89 is
greater than
100 square
centimeters.
According to
WEEE (recast)
directive, part
89 requires
selective
treatment.
90 Metal case
Metal 710.3
91 Metal frame
Metal 88.5
92 Plastic frame
Plastic 32.7
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
E
93 Label
Plastic 0
Solder,
Adhesive,
Screw
Screwdriver,
Lever,
Slanted pliers,
Knife
300
94 Textile
Mix 0.1
95 Wire
Cable/wire 2.5
96 Plastic ring
Plastic 0.9
97 Metal piece
Metal 1.7
98 Metal ring
Metal 7.3
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
E
99 Plastic ring
Plastic 9.8
100 PCBA
PCBA 31.8
101 Plastic Fan
Plastic 20.5
102 Plastic case
Plastic 44.5
103 Metal plank
Metal 39.9
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
F
104 Screw
Metal 1.3
Plug, Solder,
Snap,
Adhesive,
Screw
Screwdriver,
Lever,
Star Screwdriver (six),
Slanted pliers,
Knife
420
105 Spring
Metal 0.3
106 Spring
Metal 0.1
107 Plastic ring
Plastic 0.2
108 Metal piece
Metal 0.8
109 Metal piece
Metal 0.2
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
F
110 Plastic piece
Plastic 0.4
111 Metal piece
Metal 3.3
112 Metal piece
Metal 3.9
113 Plastic piece
Plastic 2.6
114 FPCA
FPCA 5.8
115 FPCA
FPCA 12.4
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
F
116 Metal case
Metal 4.1
117 Plastic case
Plastic 12.7
118 Plastic frame
Plastic 6.8
119 Metal case
Metal 1.9
120 Metal case
Metal 21.7
121 Metal case
Metal 22.4
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
F
122 FPCA
FPCA 11 Part 123 is a
PCBA. The
surface of
part 123 is
greater than
10 square
centimeters.
According to
WEEE (recast)
directive, part
123 requires
selective
treatment.
123 PCBA
PCBA 10.3
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
G
124 Label
Plastic 0.5
Adhesive,
Screw
Lever,
Star Screwdriver (six),
Knife
480
125 Screw
Metal 1.7
126 Plastic piece
Plastic 0.3
127 Plastic piece
Plastic 0.1
128 Plastic sheet
Plastic 0.2
129 Textile
Mix 0
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
G
130 Sponge
Plastic 0.3
Part 132 is a
PCBA. The
surface of
part 132 is
greater than
10 square
centimeters.
According to
WEEE (recast)
directive, part
132 requires
selective
treatment.
131 Label
Plastic 0
132 PCBA
PCBA 11.8
133 Metal plank
Metal 4.7
134 Metal piece
Metal 1.3
135 Metal case
Metal 36.2
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
G
136 Metal case
Metal 19.3
137 Plastic ring
Plastic 0.2
138 Metal plank
Metal 8.3
139 FPCA
FPCA 5.1
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
H
140 HP Logo
Metal 0.1
Plug, Snap,
Adhesive,
Screw
Screwdriver,
Knife 139
Part 145 is a
PCBA. The
surface of
part 145 is
greater than
10 square
centimeters.
According to
WEEE (recast)
directive, part
145 requires
selective
treatment.
141 Screw
Metal 7
142 Plastic pad
Plastic 1.6
143 Metal piece
Metal 4.2
144 Plastic piece
Plastic 1
145 PCBA
PCBA 3.9
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
H
146 Plastic pad
Plastic 1.8
Part 147 is an
external cable.
According to
WEEE (recast)
directive, part
147 requires
selective
treatment.
147 Cable
Cable/wire 37
148 Plastic pad
Plastic 28.8
149 Plastic sheet
Plastic 16.6
150 Metal plate
Metal 148.8
151 Keypad
Plastic 296.5
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
H
152 Plastic frame
Plastic 54
153 Cover Bottom
Plastic 160
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
I
154 Label
Plastic 0
Adhesive,
Seal, Screw
Screwdriver,
Knife 29
Part 159 is a
PCBA. The
surface of
part 159 is
greater than
10 square
centimeters.
According to
WEEE (recast)
directive, part
159 requires
selective
treatment.
155 Screw
Metal 0.3
156 Plastic piece
Plastic 0.1
157 Plastic piece
Plastic 2.4
158 Plastic piece
Plastic 2.6
159 PCBA
PCBA 8.5
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
I
160 Cable
Cable/wire 25.2
Part 160 is an
external cable.
According to
WEEE (recast)
directive, part
160 requires
selective
treatment.
161 Plastic case
Plastic 33.7
162 Plastic case
Plastic 14.3
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
J
163 Screw
Metal 3.3
Plug, Solder, Snap,
Adhesive, Seal
Lever, Slanted pliers,
Hammer 300
Part 165 is
An electrolyte
capacitor.
According to
WEEE (recast)
directive,part
165 requires
selective
treatment.
164 Screw ring
Metal 0.7
165 Capacitor
Capacitor 11.3
166 Cable
Cable/wire 12.7
167 Socket
Mix 13.2
168 Film
Plastic 3.6
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
J
169 Film
Plastic 4.3
Part 172 is a
PCBA. The
surface of
part 172 is
greater than
10 square
centimeters.
According to
WEEE (recast)
directive, part
172 requires
selective
treatment.
170 Plastic case
Metal 61.1
171 Plastic case
Metal 98.7
172 PCBA
PCBA 157.8
Procedure Part Disassembly
Remark No Picture No Name Picture Material Weight
(g)
Connection
Technique
Tool Time
(s.)
K
173 Power cord
Cable/wire 215.6
5
Part 173 is an
external cable.
According to
WEEE
(recast)
directive, part
173 requires
selective
treatment.