Prepared by: Engr.Farrukh Rehan, MMS (P.U); R.E (P.E.C)

Product Description: Type: Hot rolled wire rod

Steel grades: SAE 1006 according to ASTM A510/A510M

SAE 1008 according to ASTM A510/A510M

SAE 1010 according to ASTM A510/A510M

Electrode quality (USD 7) according to DIN 17145

RSt 37-2 according to DIN 17100

From – Diameter: Coils , diameter from 5.5mm to 20 mm Coil weight: Approx 1,250 kg- 1,450 kg / coil Diameter, Weight Tolerances: According to DIN 59110.ASTM A510,EN 10204

CHEMICAL COMPOSTION OF WIRE ROD STEEL GRADES

Steel Grade

C% (max)

Mn% Si% (max)

S% (max)

P% (max)

Cr% (max)

Ni% (max)

Cu% (max)

Typical Uses

SAE 1006 0.08 0.30-0.40 0.08 0.025 0.020 0.10 0.10 0.15 Black and galvanized wires, small nails

SAE 1008 0.09 0.30-0.50 0.10 0.030 0.020 0.15 0.15 0.25 Black and galvanized wires, nails, galvanized fencing mesh

SAE 1010 0.10 0.40-0.60 0.15 0.040 0.025 0.20 0.20 0.35 Concrete reinforcing mesh, standard wire mesh, nails, galvanized fencing mesh

Electrode quality

0.09 0.40-0.60 0.05 0.025 0.020 0.10 0.10 0.15 Coated welding electrodes (according to DIN 17145 / USD7)

R St 37-2 0.12 0.40-0.65 0.20 0.040 0.025 0.20 0.20 0.40 Concrete reinforcing mesh

DIAMETERS, WEIGHT AND TOLERANCES OF WIRE ROD

DIAMETER

(mm) PERMISSIABLE

DEVIATION (mm) NOMINAL CROSS

SECTION (cm2) NOMINAL WEIGHT

(kg/m)

PERMISSIABLE OUT OF ROUNDNESS

(mm)

5.5 -0.3/+0.3 0.238 0.187

0.48 6.0 -0.3/+0.3 0.283 0.222

6.5 -0.3/+0.3 0.332 0.260

7.0 -0.4/+0.4 0.385 0.302

0.64 8.0 -0.4/+0.4 0.503 0.395

9.0 -0.4/+0.4 0.636 0.499

10.0 -0.4/+0.4

Prepared by: Engr.Farrukh Rehan, MMS (P.U); R.E (P.E.C)

REFERENCES STANDARD SPECIFICATIONS: A227 A227/A227M-99 Specification for Steel Wire, Cold-Drawn for Mechanical Springs. A228 A228/A228M-93 Specification for Steel Wire, Music Spring Quality. A229 A229/A229M-99 Specification for Steel Wire, Oil-Tempered for Mechanical Springs. A230 A230/A230M-99 Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality. A231 A231/A231M-96 Specification for Chromium-Vanadium Alloy Steel Spring Wire. A232 A232/A232M-99 Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire. A313 A313/A313M-98 Specification for Stainless Steel Spring Wire. A368 A368-95a Specification for Stainless Steel Wire Strand. A401 A401/A401M-98 Specification for Steel Wire, Chromium-Silicon Alloy. A407 A407-93 (1998) Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs. A478 A478-97 Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire. A492 A492-95 Specification for Stainless Steel Rope Wire. A493 A493-95 Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging. A510M A510M-00 Specification for General Requirements for Wire Rods and Coarse Round Wire,

Carbon Steel [Metric]. A510 A510-00 Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon

Steel. A555 A555/A555M-97 Specification for General Requirements for Stainless Steel Wire and Wire Rods. A580 A580/A580M-98 Specification for Stainless Steel Wire A581 A581/A581M-95b Specification for Free-Machining Stainless Steel Wire and Wire Rods. A679 A679/A679M-00 Specification for Steel Wire, High Tensile Strength, Cold Drawn. A713 A713-93 (1998) Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components. A752M A752M-93 (1998) Specification for General Requirements for Wire Rods and Coarse Round

Wire, Alloy Steel [Metric]. A752 A752-93 (1998) Specification for General Requirements for Wire Rods and Coarse Round Wire,

Alloy Steel. A764 A764-95 Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for

Mechanical Springs. A805 A805-93 (1998) Specification for Steel, Flat Wire, Carbon, Cold-Rolled.

STANDARD METALLURGY:

1. Low Carbon Mild Steel Wire Rod

Q195 / Q215 / Q235 as per China GB SAE1006 / SAE1008 / SAE1010 / SAE1012 / SAE1015 / SAE1018 / SAE1020 as per ASTM SWRM6 / SWRM8 / SWRM10 as per JIS Sizes (mm): 5.5 / 6.0 / 6.5 / 7.0 / 8.0 / 9.0 / 10.0 / 11.0 / 12.0 / 13.0 / 14.0 / 16.0 / 18.0 / 19.0/20.0 up to 42mm.

2. Low Carbon Mild Alloy Steel Wire Rod SAE1006B / SAE1008B / SAE1010B / SAE1018B, Boron-added based on Q195 / Q215 / Q235 or SAE1006 / SAE1008 / SAE1010 / SAE1018 chemical compositions and technical properties

Prepared by: Engr.Farrukh Rehan, MMS (P.U); R.E (P.E.C)

Sizes: 5.5 / 6.0 / 6.5 / 7.0 / 8.0 / 9.0 / 10.0 / 11.0 / 12.0 / 13.0 / 14.0 / 16.0 / 18.0 / 19.0 / 20.0mm, and up to 42mm

3. High Carbon Steel Wire Rod 35# -70# as per China GB 42A / 42B / 47A / 47B / 62A / 62B / 67A / 67B / 72A / 72B / 82A / 82B as per China GB SAE1035 – SAE1070 as per ASTM SWRH62A / SWRH62B / SWRH72A / SWRH72B / SWRH82A / SWRH82B as per JIS Sizes: 5.5 / 6.5 / 7.0 / 8.0 / 9.0 / 10.0 / 11.0 / 12.0 / 12.5 / 13.0 / 14.0mm

4. Cold-heading Steel Wire Rod

ML15 – ML35 as per China GB SWRCH15K – SWRCH35K as per JIS SWRCH8A / SWRCH15A / SWRCH18A / SWRCH22A as per JIS Sizes: 5.5 / 8.0 / 9.0 / 10.0 / 11.0 / 12.0 / 13.0 / 14.0 / 16 / 18 / 20mm

5. Welding Steel Wire Rod H08A-1 / H08A-2 / H08A-3 / H08A-4 as per China GB ER50S-6 / ER70S-6 as per JIS