6 JA

NU

ARY

202

0

www.amvicsystem.com

BUILD TO A HIGHER STANDARD

501 McNicoll Avenue Toronto, ON, CA, M2H 2E2

Toll Free: 1 (877) 470-9991 • Fax: (416) 759-7402

PRODUCT DATA SHEET THERMOQUIETPR

O02

87

Thermal Acoustic Underlay

SOUND ATTENUATION

Amvic Advantage

• Includes a built-in lip and tape for fast and easy joint connections.

• Rolls out flat and straight for easy large installs.

• Can be used under electric mesh radiant heat systems or in conjunction with low profile radiant PEX pipe lock-down panels.

• Composite construction with flame retardant additive.

• Does not promote growth of mold and mildew.

• Acts a thermal break, reducing heat flow across the assembly.

• Metalized film surface acts as a vapor barrier with lip and tape for full continuity.

• Can be installed in ceilings and walls for additional sound attenuation.

Thermoquiet is an acoustic floor underlay which provides acoustic and thermal properties. It can be used for both residential and commercial applications under various finished flooring including, but not limited to, carpet, engineered or solid hardwood, vinyl plank, tile and laminate flooring.

Thermoquiet can be installed using single or double face glue, double sided carpet tape, stapled or floated over wood or concrete surfaces. Its optimized multi-layer construction including dual density foam providing superior comfort and durability.

www.amvicsystem.com

BUILD TO A HIGHER STANDARD

PRO

0287

PRODUCT DATA SHEET THERMOQUIET

Applications• Above residential wood subfloor• Below residential wood floor

joists (basement ceiling)• Low profile retrofit for basement

concrete floor• Main and second floor low

profile hydronic applications• Residential walls and home

theatre applications• Multi-story wood residential

with self-leveling cement floors• Partition/demising walls in

stacked townhouses and multi-story wood residential

• Multi-unit residential buildings with concrete floors

• Commercial walls, floors and ceilings in offices

Installation Details• Wood surface: staple every 4’

(1219mm) on center to stabilize and stretch.

• Concrete surface: glue or double side tape every 4’ (1219mm) on center to stabilize and stretch.

• Remove all folds and wrinkles when stabilizing. Do not overlap layers.

• Thermoquiet is installed with the metalized side facing down.

• Product not to be used above radiant floor heating.

Planks

Planks can be floated, nail or glue down. Solid hardwood is not suitable for basement applications.

Tile

Requires use of adhesive mortar (thinset cement), 3/4” (19mm) trowel with a minimum of 1/2” (13mm) clear mortar.

Carpet

Stretch in or glue down (direct or double glue down).

Physical Properties TableReduction of Impact Sound1

Thermal Resistance2

Roll Length

Roll Area Coverage

Roll Weight

CaseWeight

Gaylord/Pallet Weight

TQ100B35 ∆IIC 20 0.67 F.ft2.hr/Btu

(0.12 m2K/W)

25.0ft

(7.62m)

100ft2

(9.29m2)

4.5lb

(2.04kg)

9 → 55lb

9 → (24.95kg)

36 → 250lb

36 → (113kg)

TQ250B35 ∆IIC 20 0.67 F.ft2.hr/Btu

(0.12 m2K/W)

62.5ft

(19.05m)

250ft2

(23.22m2)

12lb

(5.44kg)

4 → 62lb

4 → (28.12kg)

16 → 270lb

16 → (122kg)

TQ500B35 ∆IIC 20 0.67 F.ft2.hr/Btu

(0.12 m2K/W)

125ft

(38.10m)

500ft2

(46.45m2)

24lb

(10.89kg)

6 → 225lb

6 → (102kg)Thermoquiet is 10/64” (4mm) thick by 48” (1291mm) wide. 1 As tested for ASTM E2179, 6” (152mm) concrete slab floor - ceiling assembly2 As tested for ASTM C518

See Thermoquiet Installation Guide for detailed installation instructions.