PRODUCT CATALOGUE T CATALOGUE APRIL 2010K. N. CROWDER MFG. INC. THRESHOLDS, WEATHERSTRIP, ASTRAGALS, AUTOMATIC DOOR BOTTOMS & STAIR NOSINGS PRODUCT CATALOGUE APRIL 2010

K. N. CROWDER MFG. INC.THRESHOLDS,

WEATHERSTRIP, ASTRAGALS, AUTOMATIC DOOR BOTTOMS

& STAIR NOSINGSPRODUCT CATALOGUE

APRIL 2010

www.kncrowder.com

www.kncrowder.com“Prices and Designs subject to change without notice”

T CATALOGUE

nge without notice”

www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC.2

K. N. CROWDER MFG. INC.

K. N. CROWDER MFG. INC.1220 Burloak Drive, Burlington, Ontario L7L 6B3

Telephone: 905-315-9788 Toll Free Telephone: 1-866-999-1KNC (1562)

Fax: 905-315-8090 Toll Free Fax: 1-800-567-0123

K. N. CROWDER INC.210 Eighth Street South, Lewiston, New York 14092

Telephone: 716-754-8247Toll Free Telephone: 1-866-999-1KNC (1562)

Toll Free Fax: 1-800-567-0123

www.kncrowder.com [email protected]

Where else but in Canada with its extreme variations of climate could one better choose for the testing and use of Thresholds, Weatherstrip, Astragals, Automatic Door Bottoms, and Stair Nosings.

We at K. N. Crowder Mfg. Inc., with the help and concern of Architects and Architectural Hardware Consultants, are dedicated to supply products that meet or exceed these demands.

We have been doing this for over 60 years!

SOUND/LIGHT - Products displaying this symbol are designed for use in openings where reduction of light and/or sound is necessary. Due to the variety of door and frame combinations, these products may vary in their performance. Tested ASTM E 90-90 and ASTM E-1408-91.

AIR INFILTRATION - Tested to ASTM E-283 and SDI 116.Products displaying this symbol have been Air Inflitration tested inaccordance with the requirements of ASTM E-238 Rate of Air Leakage Through Exterior Windows, Curtain Walls & Doors and SDI 116 Test Procedure and acceptance of Rate of Air Flow Through Closed Steel Door and Frame Assemblies (Steel Door Institute). All products shown with this symbol are well below maximum leakage allowed.

LISTED

ULR

C

CLASSIFIED

AIR

This Product is Listed by:

UNDERWRITERS LABORATORIES INC.and Bears the Mark

ANTI-SLIP HANDICAPPED

GENERAL INFORMATION

This symbol indicates products that are listed for use on metal doors and frames up to and including 1-1/2 hour locations. [The following products are also listed for use on metal doors and frames for installation in 3 hour locations: Weatherstrip W-23, W-24S, W-25. Astragal W-25]. Unless otherwise noted, products listed and labeled with this symbol have been evaluated for conformance to the following standards as a component part in a Door Assembly: - ASTM-E152, Methods of Fire Tests of Door Assemblies - CAN/ULC-S104, Standard Method for Fire Tests of Door Assemblies - NFPA-252, Standard Methods of Fire Tests of Door Assemblies - UBC-7-2-94, Uniform Building Code - UL-10(b), Fire Tests of Door AssembliesAnd are installed in accordance with the following: Code Requirements and Manufacturer’s Installation Instructions. All assemblies are identified by a mark bearing the “Listed” WHI Certification Mark.

TESTED BY INTERTEK TESTING SERVICES.

SERIES

PAGE

SERIES

PAGE

CT-1 16 CT-23 ∗ 17CT-9 ∗ ∗ 9 CT-22/4A ∗ 17CT-10 ∗ ∗ 9 CT-100 ∗ 17CT-11 ∗ ∗ 9 CT-101 ∗ 17CT-12 ∗ ∗ 9 CT-103 ∗ 17CT-16 16 CT-104 ∗ 17CT-31 ∗ 16 CT-106 ∗ 17CT-32 ∗ ∗ 9 CT-175 ∗ 17CT-36 16CT-39 16CT-64 ∗ ∗ 6 CT-74 ∗ 12CT-65 ∗ ∗ 6 CT-75 ∗ 12CT-66 ∗ ∗ 6 CT-76 ∗ 12CT-67 ∗ ∗ 6 CT-80 ∗ 12CT-68 ∗ ∗ 6 CT-81 ∗ 12CT-69 ∗ ∗ 6 CT-83 ∗ 12CT-94 ∗ 16 CT-86 ∗ 12CT-95 ∗ 16 CT-87 ∗ 12CT-610 ∗ ∗ 6CT-611 ∗ ∗ 6CT-612 ∗ ∗ 6 CT-406 13 & 14CT-704 ∗ ∗ 8 CT-407 13 & 14CT-705 ∗ ∗ 8 CT-408 13 & 14CT-706 ∗ ∗ 8 CT-409 13 & 14CT-804 ∗ ∗ 8 CT-40N 7 & 11CT-805 ∗ ∗ 8 CT-40P 7 & 11CT-806 ∗ ∗ 8 CT-40S ∗ 7 &11CT-807 ∗ ∗ 8 CT-410 13 & 14CT-808 ∗ ∗ 8 CT-410-2 13 &14CT-909 ∗ ∗ 10 CT-41-1 13 & 14CT-910 ∗ ∗ 10 CT-42-1 13 & 14CT-911 ∗ ∗ 10 CT-43-1 13 & 14CT-912 ∗ ∗ 10 CT-44 ∗ 14CT-913 ∗ ∗ 10 CT-44-1 13 & 14CT-914 ∗ ∗ 10 CT-45 ∗ 14CT-915 ∗ ∗ 10 CT-45-1 13 & 14CT-916 ∗ ∗ 10 CT-46 ∗ 14

CT-47 15CT-47-1 13

CT-60 ∗ 16 CT-47-1S 13CT-61 ∗ 16 CT-47S 15

CT-48 15CT-48S 15CT-49 15CT-49-1 13CT-49S 15

1/2" THERMAL BREAK THRESHOLDS

CARPET DIVIDERS

THRESHOLDS

1/4" THERMAL BREAK THRESHOLDS

BUILD ANY SIZE THRESHOLDS

100% CANADIAN OWNED AND OPERATED www.kncrowder.com

3

LISTEDULR

C

CLASSIFIED

LISTEDULR

C

CLASSIFIED

TABLE OF CONTENTS


TABLE OF CONTENTS (CONT’D)

SERIES

PAGE

SERIES

PAGE

CT-20/3A &CT-20/3 ∗ 18 W-32S 31CT-20/4 &CT-20/4A ∗ 18 W-47 ∗ 31CT-20/5A &CT-20/5 ∗ 18 W-47S 31CT-21/2 &CT-21/2A ∗ 19 W-49 ∗ 31CT21/3A &CT-21/3 ∗ 19 W-50S ∗ 31CT-21/4 &CT-21/4A ∗ 19 W-61 ∗ 31CT-21/5A &CT-21/5 ∗ 19 W-87P 33CT-22/34A ∗ 18 W-88N 33CT-22/138A &CT22/138 ∗ 18 W-88P 33CT-22/3 &CT-22/3A ∗ 18CT22/4A &CT-22/4 ∗ 17 & 18CT-23 ∗ 17 & 18 W-21 ∗ ∗ 32

W-66 ∗ ∗ 32W-22 ∗ ∗ 32

CT-27 19 6216 32CT-227 19

W-28 33CT-9SS 20 W-29 33CT-10SS 20 W-31 33CT-50SS ∗ 20 & 22CT-52SS ∗ 20W-8SS 20 & 36 W-4 26W-13SS 20 W-11 26W-13S-SS 20 W-13S ∗ 26

W-13S-2 ∗ 26W-19 ∗ 26

W-1 &W-1F 28 W-23 ∗ 27 & 30W-2 &W-2F 28 W-24S ∗ 27W-3 33 W-25S ∗ 27W-6 ∗ 28 W-26-1 ∗ 27W-13 ∗ 28 & 38 W-26-2 ∗ 27W-14 ∗ 28 W-26-3 ∗ 27W-15 ∗ 28 & 38 W-33S ∗ 27W-16N ∗ 29 W-34S ∗ 27W-16P 29 W-35-1 ∗ 27W-16S ∗ 29 W-35-2 ∗ 27W-16V 29 W-35-3 ∗ 27W-17N 29 W-37-1 ∗ 27W-17S ∗ 29 W-38S ∗ 26W-18 ∗ 30 & 38W-20N 30W-20P 30 W-42 ∗ 34W-20S ∗ 30 W-43 34W-23 ∗ 27 & 30 W-44 34W-27 30 W-45 ∗ 34 & 38W-32N 31 W-48 34W-32P 31

SPRING LOADED AND ADJUSTABLE WEATHERSTRIP

KERF MOUNTED WEATHERSTRIP

WEATHERSTRIP

STAIR NOSINGS

STAIR NOSING ANCHORS

WEATHERSTRIP (CONT’D)

SELF ADHESIVE WEATHERSTRIP

STAINLESS STEEL PRODUCTS

SWEEPS

LISTEDULR

C

CLASSIFIED

LISTEDULR

C

CLASSIFIED


5

LISTEDULR

C

CLASSIFIED

LISTEDULR

C

CLASSIFIED

THRESHOLDS: ALL THRESHOLDS ARE SUPPLIED PRE-DRILLED AND COUNTER SUNK WITH 3/16” X 1-3/4” HiLo-TAPPING THREAD, GREY, PHILLIPS DRIVE, CONCRETE SCREWS. (5/32” PRE-DRILL REQUIRED).

WEATHERSTRIP: WHERE APPLICABLE, WEATHERSTRIP SEALS ARE SUPPLIED PUNCHED WITH OBROUND HOLES FOR ADJUSTMENT AND #8 X 3/4” SELF-DRILLING PAN HEAD, ROBERSTON DRIVE, TEK SCREWS.

OPTIONAL: OTHER FASTENERS, IN STANDARD ZINC PLATED, STAINLESS STEEL & TORX TAMPERPROOF SCREWS ARE AVAILABLE. SEE BELOW FOR DETAILS. CONTACT CUSTOMER SERVICE FOR PRICING & AVAILABLITY

SERIES

PAGE

SERIES

PAGE

W-40 35 INTRODUCTION 21W-40M 35 CT-50 ∗ 22 & 38W-40P 35 CT-50F 22W-40V 35 CT-50SS ∗ 20 &22W-41 35 CT-51 22 & 38

CT-51F 22CT-52 ∗ 23

W-5 36 CT-52S ∗ 23W-7 ∗ 36 CT-52SS ∗ 20W-8 36 CT-52B 23W-8P 36 CT-53 23W-8S 36 CT-53S 23W-8SP 36 CT-53B 23W-8SS 20 & 36 CT-53F 23W-9 36 CT-54 ∗ 24W-25 ∗ 36 CT-54N 24

CT-50 ∗ 22 &38 CT-55 25CT-51 22 & 38 CT-730 24CT-70 ∗ ∗ 37 CT-745 25CT-71 37 CT-746 25CT-72 ∗ ∗ 37 CT-747 ∗ 25W-13 ∗ 28 & 38 CT-748 ∗ 25W-15 ∗ 28 & 38W-18 ∗ 30 & 38W-45 ∗ 34 &38 39

40

INDEX

LIST OF AGENTS & OTHER PRODUCTS BY KNC

AUTOMATIC DOOR BOTTOMS

DOOR SHOES

SPRING LOADED AND ADJUSTABLE ASTRAGALS

ASTRAGALS

KNC SOUND CONTROL

FASTENERS

#10 x 1-1/2” Truss Head, Robertson Drive,

Type A Screw

#8 x 1” Pan Head, Robertson Drive,

Self-Drilling Tek Screw

#10 x 1” Pan Head, Robertson Drive,

Self-Drilling Tek Screw

#10 x 1-1/2” Flat Head, Robertson Drive,

Type A Screw

1/4”-20 x 3/4” Button HeadSocket Cap Screw with

Security Sleeve (For Astragals &

W-19 Door Sweep only)

THRESHOLDS

www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC.

CT-68

CT-69

CT-610

CT-611

CT-612

CT-67

CT-66

CT-65

CT-64

[177.8mm] 2 PIECE CONSTRUCTION7"

[203.2mm]8" 2 PIECE CONSTRUCTION

[101.6mm]4"

[127mm]5"

[152.4mm]6"


[254mm] 2 PIECE CONSTRUCTION10"


[6.4mm]1/4"

[6.4mm]1/4"

2 PIECE CONSTRUCTION[279.4mm]11"

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

Welding is available upon request.

6

ALL PRODUCTSON THIS PAGELISTED


]

[6.4mm]1/4"

[6.4mm]1/4"

[6.4mm]1/4"

[6.4mm]1/4"

[6.4mm]1/4"

[6.4mm]1/4"

[6.4mm]1/4"

CT- 40N*STOP STRIP

EXTRUDED ALUMINUM & NEOPRENE

11/16"[17.5mm]

7/16" [11.1mm]

CT- 40P*STOP STRIP

EXTRUDED ALUMINUM & PILE

11/16"[17.5mm]

7/16" [11.1mm]

CT- 40S*STOP STRIP

EXTRUDED ALUMINUM & SILICONE

11/16"[17.5mm]

7/16" [11.1mm]

NEW

7

LISTED

* The following products are not

THRESHOLDS


CT-704

4" [101.6mm]

5" [127mm]

6" [152.4mm]

4" [101.6mm]

5" [127mm]

6" [152.4mm]

7" [177.8mm]

8" [203.2mm]

CT-705

CT-706

CT-804

CT-805

CT-806

CT-807

CT-808

1/4" [6.4mm]

1/4" [6.4mm]

1/4" [6.4mm]

1/2"[12.7mm]

1/2"[12.7mm]

1/2"[12.7mm]

1/2"[12.7mm]

1/2"[12.7mm]

1/2"[12.7mm]

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM


THRESHOLDS


9

CT-91/2" [12.7mm]

EXTRUDED ALUMINUM

TYPICAL ALLTHRESHOLDSON THIS PAGE 4" [101.6mm]

CT-10

EXTRUDED ALUMINUM

5" [127mm]

CT-11

EXTRUDED ALUMINUM

6" [152.4mm]

CT-12

EXTRUDED ALUMINUM

7" [177.8mm]

CT-32

EXTRUDED ALUMINUM

8" [203.2mm]

CT-10 AND CT-11 THRESHOLDSAVAILABLE NOTCHED FOR STDHOLLOW METAL DOOR FRAME.

STANDARD NOTCH SIZE IS:2-7/16” WIDE X 5/8” DEEP.


NEW

THRESHOLDS


CT-909 9" [228.6mm] 2 PIECE CONSTRUCTION

EXTRUDED ALUMINUM

CT-910

CT-911

CT-912

CT-913

CT-914

CT-915

CT-916

10" [254mm] 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM

11" [279.4mm] 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM




15" [381mm] 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM


Welding is available upon request.ALL PRODUCTSON THIS PAGELISTED

100% CANADIAN OWNED AND OPERATED www.kncrowder.com11

1/2" [12.7mm] CT- 40N*STOP STRIP


11/16"[17.5mm]

7/16" [11.1mm]

CT- 40P*STOP STRIP


11/16"[17.5mm]

7/16" [11.1mm]

CT- 40S*STOP STRIP

EXTRUDED ALUMINUM & SILICONE

11/16"[17.5mm]

7/16" [11.1mm]

TYPICAL ALL THRESHOLDSON THESE PAGES

NEW

* The following products are not

LISTED

1/4” THERMAL BREAK THRESHOLDS


1 3/4" [44.5mm]

2 27/32" [72.2mm] 1 5/8" [41.3mm]

3 7/8" [98.4mm]

5" [127mm]

6 1/8" [155.6mm]

5 7/8" [149.2mm]

7" [177.8mm]

CT-80

CT-81CT-83

CT-74

CT-75

CT-76

CT-86

CT-87

1/4" [6.4mm]

TYPICAL ALL THRESHOLDS THIS PAGE

1 13/16" [46mm]

EXTRUDED ALUMINUMINSERT NOT INCLUDED


EXTRUDED ALUMINUMONE INSERT INCLUDED

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

ALL PRODUCTSON THIS PAGE

NEW

PRODUCT

LINE



13

CT-44-1

CT-45-1

CT-42-1

CT-43-1

CT-49-1

CT-41-1

CT-47-1


1/2"[12.7mm]

2" [50.8mm]

3" [76.2mm]

4" [101.6mm]

5" [127mm]

1 11/32" [34.1mm]

1/2"[12.7mm]

1/2"[12.7mm]

13/32"[10.3mm]

1/2"[12.7mm]

2" [50.8mm]

1/2"[12.7mm]

1 29/32" [48.4mm]

FLEXIBLE NEOPRENE

FROST INSERTRIGID P.V.C.

15/16"[23.8mm]





EXTRUDED ALUMINUMONE INSERT INCLUDED

EXTRUDED ALUMINUMWITH FLEXIBLE NEOPRENE.

FROST INSERT NOT INCLUDED

NEW

NEW

CT-47-1SEXTRUDED ALUMINUM

WITH FLEXIBLE SILICONE.FROST INSERT NOT INCLUDED

NEW

5/16"[7.9mm]



CT-44EXTRUDED ALUMINUM WITH RIGID P.V.C.

4" [101.6mm]


5" [127mm]

6" [152.4mm]

6" [152.4mm]

7" [177.8mm]

8" [203.2mm]

9" [228.6mm]

10" [254mm]







CT-410-2EXTRUDED ALUMINUM WITH RIGID P.V.C.

3" [76.2mm] 2" [50.8mm]


NEW

PRODUCT

CODE

NEW

PRODUCT

CODE

NEW

PRODUCT

CODE

NEW

PRODUCT

CODE

NEW

PRODUCT

CODE

NEW

PRODUCT

CODE


EXTRUDED ALUMINUMWITH FLEXIBLE NEOPRENE

& RIGID P.V.C. FROST INSERT

CT-48

5" [127mm]

3 7/8" [98.4mm]

3 1/4" [82.6mm]

15/16"[23.8mm]

15/16"[23.8mm]

15/16"[23.8mm]

FLEXIBLE SILICONE

5" [127mm]

NEWEXTRUDED ALUMINUM

WITH FLEXIBLE SILICONE& RIGID P.V.C. FROST INSERT

CT-48S

FLEXIBLE NEOPRENE

FLEXIBLE SILICONE

EXTRUDED ALUMINUMWITH FLEXIBLE SILICONE


CT-47S



CT-47



CT-49

EXTRUDED ALUMINUMWITH FLEXIBLE SILICONE


CT-49S

13/32"[10.3]

CT-60 CT-61

THRESHOLDS


CT-1

3 5/8" [92.1mm]

1/2"[12.7mm]

25/32"[19.8mm]

EXTRUDED ALUMINUM AND VINYL1 9/16" [39.7mm]

7/16"[11.1mm]

CT-16

EXTRUDED ALUMINUM AND VINYL

3 19/32" [91.3mm]

5/8"[15.9mm]

CT-36

EXTRUDED ALUMINUM AND VINYL2 1/2" [63.5mm]

3/8"[9.5mm]

CT-31

EXTRUDED ALUMINUM

3 15/16" [100mm]

1/2"[12.7mm]

CT-94

EXTRUDED ALUMINUM

4 15/16" [125.4mm]

1/2"[12.7mm]

CT-95

EXTRUDED ALUMINUM

4 31/32" [126.2mm]

1/2"[12.7mm]

13/16"[20.6mm]

1 5/8" [41.3mm]

CT-39


4"[101.6mm]

1 3/4"[44.5mm]

3/8"[9.5mm]

CARPET DIVIDER

CARPET DIVIDER

EXTRUDED ALUMINUM EXTRUDED ALUMINUM

LISTED LISTED

BUILD ANY SIZE THRESHOLDS


17

CT-100

EXTRUDED ALUMINUM

3/4"[19.1mm]

1/2"[12.7mm]

CT-100

CT-175

CT-104

1/4" [6.4mm]

1 1/2" [38.1mm] 2" [50.8mm]

1 1/2"[38.1mm]

3/4" [19.1mm]1/2" [12.7mm]

CT-1751"[25.4mm]

EXTRUDED ALUMINUM

1/4" [6.4mm]

1 1/8" [28.6mm]

CT-23 CT-103

3" [76.2mm]

1/4" [6.2mm]

CT-1061/4" [6.4mm]

6" [152.4mm]

EXTRUDED ALUMINUM EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

CT-22/4ACT-23

9 1/2" [241.3mm]

CT-100 CT-104 CT-103

CT-101

CT-175

6 1/2" [165.1mm]

6 5/8" [168.3mm]

NEW

STAIR NOSINGS


CT-20/3A

CT-20/3LANEL INSERT (P.V.C.)

1/4" [6.4mm]

1/4" [6.4mm]

EXTRUDED ALUMINUM

ALUMINUM OXIDE GRITIN EPOXY BASE

CT-20/4

CT-20/4A

LANEL INSERT (P.V.C.)


CT-20/5A



1/4" [6.4mm]

CT-22/138A



CT-22/3

CT-22/3A



CT-22/4A



3" [76.2mm]

CT-22/34A

[5

ALUMINUM OXIDE GRITIN EPOXY BASESELF ANCHORING

1/2"[12.7mm]

[12.7mm]

[12.7mm]

3/4"[19.1mm]

3/4"[19.1mm]

1/4" [6.4mm]

1/4" [6.4mm]

5" [127mm]

4" [101.6mm]

3" [76.2mm]

4" [101.6mm]

1 3/8" [34.9mm]

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

1/4" [6.4mm]

1 1/8" [28.6mm]

CT-23

EXTRUDED ALUMINUM


1/4" [6.4mm]

1/2"

1/2"


2"[50.8mm]

CT-21/2

CT-21/2A



CT-21/4

CT-21/4A



CT-21/3A



CT-21/5A



1/4" [6.4mm]

2" [50.8mm]

3" [76.2mm]

4" [101.6mm]

5" [127mm]

1 3/4"[44.5mm]

CT-27CASTMETAL ANCHORFor use in concrete (pour in place installations). Nosings are pre-drilled and countersunk for machine screws (supplied with anchor).

CT-227HIDDEN STRAP ANCHORFor use with Abrasive applications only. No visible screws.Typical Spacing is 12” [300mm] center to center.

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

EXTRUDED ALUMINUM

11/16"[17.5mm]


Shown after bending on site.

Shipped as shown.

CT-20/3 Stair Nosing shown here for illustration purposes.CT-27 is sold separately.

CT-20/3A Stair Nosing shown here for illustration purposes.CT-227 is sold separately.

STAINLESS STEEL PRODUCTS


2 1/2"[63.5mm]

2 7/32"[56.4mm]

5/8"[15.9mm]

CT-50SSSTAINLESS STEEL OVERANODIZED ALLUMINUM & NEOPRENE SEAL

31/32"[24.6mm]

CT-52SSSTAINLESS STEEL OVERANODIZED ALLUMINUM & NEOPRENE SEAL

W-13SSSTAINLESS STEELAND CLOSED CELL NEOPRENE

3/16" [4.8mm] 5/32" [4mm]

1 7/16"[36.5mm]

3/16"[4.8mm]

W-13S-SSSTAINLESS STEELWITH SOLID NEOPRENE

1 5/32"[29.4mm]

1 11/16"[42.9mm]

1/8"[3.2mm]

W-8SS STAINLESS STEEL ASTRAGAL

2" [50.8mm]

CT-9SS 304 SS. 2B FINISH

4" [101.6mm]

1/2"[12.7mm]

5" [127mm]

1/2"[12.7mm]

CT-10SS 304 SS. 2B FINISHOTHER SIZES AVAILABLE UPON REQUEST

LISTED

LISTED

NEW

PRODUCT

LINE

CT-11SSCT-64SSCT-65SSCT-66SS

ALSO AVAILABLE.PLEASE SEE WEBSITE

FOR DETAILS.



21

ADJUSTABLEPLUNGER(Hinge Side)

MOUNTING HOLES

ACTIVATING SPRINGAND SLIDE ASSEMBLY

PRESSURE BARAND SEAL (Neoprene)

TRIM LOCK SIDE OF DOOR ONLY

Where else but in Canada with its extreme variations of climate could onebetter choose for the testing and the use of Automatic Door Bottoms.We at K. N. Crowder with the help and concern of Architects and Contract Hardware Consultants, are dedicated to supply products that meet or exceed these demands.We have been doing it for over 50 years!

K. N. Crowder Mfg. Inc.

When nothing but the bestwill do...for the bottomof your doors...

Our Automatic Door Bottoms (ADB) are made from extruded aluminum combined with closed cell sponge neoprene, silicone, felt, or brush. Activation occurs when the plunger is depressed against the door frame, sealing out draft, sound and light. When the door is opened the seal immediately retracts.

Specifications:

End CapsAre available for both ends and can beremoved without taking door off the frame.



LISTED

CT-50

9/16"[14.3mm]

9/16"[14.3mm]

1 13/16"[46mm]

1 13/16"[46mm]

5/8" Max. Drop

5/8" Max. Drop

CT-50F

CT-51

1 1/2"[38.1mm]

17/32"[13.5mm]

1 3/16"[30.2mm]

5/8" Max. Drop

5/16"[7.9mm]

1 1/2"[38.1mm]

17/32"[13.5mm]

5/8" Max. Drop

CT-51F

9/16"[14.3mm]

5/8"[15.9mm]

2 7/32"[56.4mm]

5/8" Max. Drop

CT-50SS

ANODIZED ALUMINUM & NEOPRENE SEAL

ANODIZED ALUMINUM & FELT SEAL

STAINLESS STEEL OVER ANODIZED ALUMINUM & NEOPRENE SEAL

EXTRUDED ALUMINUM & NEOPRENE SEAL

EXTRUDED ALUMINUM & FELT SEAL

SURFACE MOUNT MORTICED APPLICATION

LISTED

1 3/16"[30.2mm]



23

CT-52

1 29/32"[48.4mm]

29/32"[23mm]

15/16"[23.8mm]

1 5/8"[41.3mm]

CT-52S CT-52B CT-52F

CT-53CT-53S CT-53B CT-53F

ANODIZED ALUMINUM & NEOPRENE SEAL

EXTRUDED ALUMINUM & NEOPRENE SEAL

ANODIZED ALUMINUM & SILICONE SEAL

EXTRUDED ALUMINUM & SILICONE SEAL

1 9/16" [39.7mm]

ANODIZED ALUMINUM & BRUSH SEAL

EXTRUDED ALUMINUM & BRUSH SEAL

ANODIZED ALUMINUM & FELT SEAL

EXTRUDED ALUMINUM & FELT SEAL

CT-52S

CT-53S

MORTISED APPLICATIONSURFACE MOUNTED SEMI-MORTISED

13/16"MAX DROP

13/16"MAX DROP

13/16"MAX DROP

13/16"MAX DROP

13/16"MAX DROP

13/16"MAX DROP

NEW

LISTED LISTED

NEW



LISTED

ADJUSTABLE DOOR SHOE

CT-54

Designed to fit the recessof a standard hollow metaldoor. Available from stocksizes of 24", 30" 36", 42" and 48". 'Stock sizes can be shortened up to 6"except 24" which can be shortened to 21". Longer and shortersizes fabricated to order - contact KNC.

1"[25.4mm]

MAX. DROP7/16"

[11.1mm]

ILLUSTRATEDWITH OPTIONAL1/4" SHIM

CT-54N C/W NEOPRENE INSERT(NOT FIRE RATED)


ADJUSTMENT SCREW

5/8"[15.9mm]

1/2"[12.7mm]

1"[25.4mm]

3/4"[19.1mm]

1/4" [6.4mm]

WOOD ORHOLLOW METAL

CT-730EXTRUDED ALUMINUM AND VINYL. FOR 1-3/4" DOORS

ADJUSTABLE DOOR SHOE

1 3/8"[34.9mm]

DOOR SHOES


25

CT-55

1 3/8"[34.9mm]

1/8"[3.2mm]

3/8"[9.5mm]


1 3/8"[34.9mm]

3/8"[9.5mm]

1 1/16"[27mm]

1 3/16"[30.2mm]

1/2"[12.7mm]

CT-746 EXTRUDED ALUMINUM & VINYL

1 1/8"[28.6mm]

5/8"[15.9mm]

1/2"[12.7mm]

7/8"[22.2mm]

1/4"[6.4mm]

3/8"[9.5mm]


FOR1-3/4" DOORS ONLY


1 1/16"[27mm]

3/4"[19.1mm]

1/4"[6.4mm]

1/2"[12.7mm]


1 1/4"[31.8mm] 1/4"

[6.4mm]

1/2"[12.7mm]

ULR

C

CLASSIFIED

ULR

C

CLASSIFIED

ULR

C

CLASSIFIED

ULR

C

CLASSIFIED

NEW

PRODUCT

LINE

SWEEPS


1 1/4"[31.8mm]

1 3/4"[44.5mm]

GREY P.V.C.

3/16"[4.8mm]W-11

CLEAR ANODIZED ALUMINUM

1 1/4"[31.8mm]

1 3/4"[44.5mm]

GREY P.V.C.

5/16"[7.9mm]

MILL FINISH ALUMINUM

W-4

3/16"[4.8mm]

1 1/4"[31.8mm]

1 25/32"[45.3mm]W-13S

ANODIZED ALUMINUM WITH SOLID NEOPRENESTAINLESS STEEL AVAILABLE

3/16"[4.8mm]

1 1/4"[31.8mm]

2 1/4"[57.2mm]

W-13S-2ANODIZED ALUMINUM WITH SOLID NEOPRENESTAINLESS STEEL AVAILABLE

1/4"[6.4mm]

1"[25.4mm]

1 3/4"[44.5mm]

W-38SANODIZED ALUMINUM & SILICONE SEAL

1 3/4"[44.5mm]

3"[76.2mm]

7/16"[11.1mm]

W-19ALUMINUM WITHSOLID NEOPRENESTAINLESS STEEL AVAILABLE

DOMINION SWEEP

NEW

LISTEDLISTED

LISTEDLISTED

SWEEPS


27

W-33S

1 3/32"[27.8mm]

2"[50.8mm]

W-34S

3"[76.2mm]

1 3/32"[27.8mm]

W-37-1

1 3/32" [27.8mm]

1"[25.4mm]

3/8"[9.5mm]

5/8"[15.9mm]

21/32"[16.7mm]

17/32"[13.5mm]

W-23 W-25S

7/32"[5.6mm]

7/8"[22.2mm]

1 5/16"[33.3mm]

1 11/16"[42.9mm]

1 3/8"

[34.9mm]

23/8"

[60.3mm]

3 3/8"

[85.7mm]

W-26-1

W-26-1

W-26-2

W-26-3

MILL FINISH ALUMINUM

W-26-2MILL FINISH ALUMINUM

W-26-3MILL FINISH ALUMINUM

3/8" [9.5mm]

1 3/32"[27.8mm]

2 3/32"[53.2mm]


W-24S







1"[25.4mm] W-35-1

2"[50.8mm] W-35-2

3"[76.2mm] W-35-3

W-35-1

W-35-2

W-35-3

NEW




1/2"[12.7mm]

1 3/8"[34.9mm]

WEATHERSTRIP


NEW

LISTED

LISTED LISTED

LISTEDW-14CLEAR ANODIZED ALUMINUMAND CLOSED CELL NEOPRENE

W-6MILL FINISH ALUMINUMAND CLOSED CELL NEOPRENE

1/2"[12.7mm] 3/8" [9.5mm]

2 1/32" [51.6mm]

1 1/2" [38.1mm]

W-13CLEAR ANODIZED ALUMINUMAND CLOSED CELL NEOPRENE

3/16" [4.8mm]

1 17/32" [38.9 mm]

1 1/4" [31.8mm]

5/32" [4mm]


3/8" [9.5mm]7/16" [11.1mm]

1" [25.4mm]

1 1/2" [38.1mm]

W-1FMILL FINISH ALUMINUMAND VINYL

W-2FMILL FINISH ALUMINUMAND VINYL

W-1MILL FINISH ALUMINUMAND VINYL

1" [25.4mm]

11/32" [8.7mm]

1 1/4" [31.8mm]

W-2MILL FINISH ALUMINUMAND VINYL

9/32" [7.1mm]

11/16"[17.5mm]

31/32" [24.6mm]

NEW

1/4" [6.4mm]1/4" [6.4mm]

1 1/16" [27mm]

25/32"[19.8mm]

WEATHERSTRIP


29

NEW

NEW

LISTED

LISTED

LISTED

W-17NCLEAR ANODIZED ALUMINUMAND NEOPRENE

5/16" [7.9mm]

1 3/16" [30.2mm]

29/32"[23mm]

13/32" [10.3mm]

W-16PCLEAR ANODIZED ALUMINUMAND PILE WITH FIN SEAL

1 3/16" [30.2mm]

13/32" [10.3mm]

29/32"[23mm]

11/32" [8.7mm]

W-16VCLEAR ANODIZED ALUMINUMAND VINYL

1 7/32" [31mm]

13/32" [10.3mm]

29/32"[23mm]

W-17SCLEAR ANODIZED ALUMINUMAND SILICONE SEAL

5/16" [7.9mm]

29/32"[23mm]

1 1/8" [28.6mm]

7/16" [11.1mm]

W-16SCLEAR ANODIZED ALUMINUMAND SILICONE SEAL

13/32" [10.3mm]

29/32"[23mm]

1 7/32" [31mm]

13/32"

CLEAR ANODIZED ALUMINUMAND EXTRUDED NEOPRENE

1 5/16" [33.3mm]

13/32"[10.3mm]

29/32"[23mm]

W-16N

[10.3mm]

WEATHERSTRIP


W-20SCLEAR ANODIZED ALUMINUMAND SILICONE RUBBER

1 1/2" [38.1mm]

1 23/32" [43.7mm]

5/16"[7.9mm] 11/32" [8.7mm]

W-23CLEAR ANODIZED ALUMINUMAND NYLON BRUSH

17/32"[13.5mm]

1 3/32" [27.8mm]

23/32"[18.3mm]

5/16"[7.9mm]

FULLBRUSH SEALLISTINGS ON

PAGE 27

5/16" [7.9mm]

W-20NCLEAR ANODIZED ALUMINUMAND NEOPRENE

1 11/16" [42.9mm]

5/16"[7.9mm]

1 1/2" [38.1mm]

11/32" [8.7mm]

W-20PCLEAR ANODIZED ALUMINUMAND PILE WITH FIN SEAL

1 3/4" [44.5mm]

5/16"[7.9mm]

1 1/2" [38.1mm]

7/16"[11.1mm]

1 1/8" [28.6mm]

5/8"[15.9mm]

W-27CLEAR ANODIZED ALUMINUMAND VINYL WITH MAGNET

MAGNETIC

WEATHERSTRIP

1/4" [6.4mm]


1"1" [25.4mm]

3/16" [4.8mm]

1 7/16" [36.5mm]

NEW

LISTED

LISTED

WEATHERSTRIP


31

LISTED

LISTED

LISTED

3/8" [9.5mm]

W-61NCLEAR ANODIZED ALUMINUMAND EXTRUDED NEOPRENE

1 1/4" [31.8mm]

13/32"[10.3mm]

1 1/16" [27mm]

W-32NCLEAR ANODIZED ALUMINUM 2-PIECE W/SNAP ON COVER AND NEOPRENE

7/16" [11.1mm]

1" [25.4mm]

1 5/16" [33.3mm]

5/16" [7.9mm]

1/4" [6.4mm]

W-49MILL FINISH ALUMINUMAND CLOSED CELL NEOPRENE

1/4" [6.4mm]

1 1/16" [27mm]

25/32"[19.8mm]

1 5/16" [33.3mm]

1/2" [12.7mm]

W-50S

1" [25.4mm]

1/4" [6.4mm]

CLEAR ANODIZED ALUMINUMAND SILICONE RUBBER SUITABLEFOR -110 F ( -80 C) TO +570 F (+300 C)o o o o

7/16" [11.1mm]

1" [25.4mm]

1 1/4" [31.8mm]

5/16" [7.9mm]

W-32PCLEAR ANODIZED ALUMINUM 2-PIECE W/SNAP ON COVER AND PILE WITH FIN SEAL

W-32SCLEAR ANODIZED ALUMINUM 2-PIECE W/SNAP ON COVER AND SILICONE

W-47CLEAR ANODIZED ALUMINUMAND EXTRUDED NEOPRENE

1 13/32" [35.7mm]

21/32"[16.7mm]

1" [25.4mm]

W-47SCLEAR ANODIZED ALUMINUM AND SILICONE

NEW

NEW

LISTED

SELF ADHESIVE WEATHERSTRIP


ADHESIVE BACKED NEOPRENE WEATHERSTRIP

1/16" x 3/8"1/16" x 1/2" 1/8" x 1/4" 1/8" x 3/8" 1/8" x 1/2"

3/16" X 1/4"3/16" X 3/8"3/16" X 1/2" 1/4" X 3/8" 1/4" X 1/2" 1/4" X 3/4"

3/8" X 1/2"3/8" X 3/4"1/2" X 1/2"1/2" X 3/4"

No. 6216BLACK

CLOSED CELL SPONGE NEOPRENE OIL RESISTANT, LOW WATER ABSORPTIONTEMPERATURE RANGE:-70 TO +250 F (-57 C TO +121 C)o ooo

OTHER SIZES/COLOURS, SPECIAL ORDER: CONTACT OFFICE

W-21*

1/2"[12.7mm]

1/4"[6.4mm]

-SANTOPRENE SELF ADHESIVE GASKET-SMOKE, LIGHT AND SOUND CONTROL-RESISTS FUNGUS AND MILDEW-TEMP. RANGE -80 F TO +150 F (-62 C TO +66 C)-AVAILABLE IN BLACK or BROWN

o o

o o

W-66-SANTOPRENE SELF ADHESIVE GASKET-SMOKE, LIGHT AND SOUND CONTROL-RESISTS FUNGUS AND MILDEW-TEMP. RANGE -80 F TO +150 F (-62 C TO +66 C)-AVAILABLE IN BLACK or BROWN

o o

o o

3/16"[4.8mm]

3/8"[9.5mm]

NEW

-SILICONE SELF ADHESIVE GASKET-SMOKE, LIGHT AND SOUND CONTROL-UNAFFECTED BY FUNGUS AND MILDEW-TEMP. RANGE -110 F TO +400 F ( -80 C TO +204 C)-AVAILABLE IN BLACK or BROWN

o o

o o

1/2"[12.7mm]

1/4"[6.4mm]

W-22 NEW

LISTED

ULR

CCL

ASSIFIED

AIR

W-21 is approved for use with 90 minuterated mineral core wood, plastic lamfacedfire doors & wood veneered steel frames.

*

WEATHERSTRIP


33

2 1/2" [63.5mm]

1 7/32"[31mm]

5/8"[15.9mm]

W-3 CLEAR ANODIZED ALUMINUM

DRIP CAP

W-29CLEAR ANODIZED ALUMINUM AND SEAMLESS SANTOPRENE ELOSTOMERIC SKIN SEAL (BLACK, BROWN OR WHITE)

5/8"[15.9mm]

31/32"[24.6mm]

15/32"[11.9mm]

1 19/32" [40.5mm]

9/16"[14.3mm]

KERF MOUNTED SEAMLESSSANTOPRENE ELOSTOMERIC SKIN SEALAVAILABLE IN BLACK, BROWN OR WHITE

W-28

19/32"[15.1mm]

3/32"[2.4mm]

KERF MOUNTED

3/8"[9.5mm]

W-88N

9/32" [7.1mm]

13/32" [10.3mm]

EXTRUDED ALUMINUM WITH NEOPRENE INSERT. ALSO AVAILABLE WITH PILE INSERT : W-88P

5/32" [4mm]

W-87P

11/32" [8.7mm]

1/8" [3.2mm]

KERF MOUNTED PILE WEATHERSTRIP

1/4" [6.4mm]

3/16"[4.8mm]

KERF MOUNTED SEAMLESSSANTOPRENE ELOSTOMERIC SKIN SEALAVAILABLE IN BLACK, BROWN OR WHITE

W-31

KERF MOUNTED 3/8" [9.5mm]

15/32" [11.9mm]

1/4" [6.4mm]

3/32"[2.4mm]

NEW

NEW

1/16" [1.6mm]

SPRING LOADED AND ADJUSTABLE WEATHERSTRIP


1/2"[12.7mm]

1 1/4"[31.8mm]

ADJUSTING RANGE1/4" [6.4mm]

W- 42ADJUSTABLE PERIMETER SEAL CLEAR ANODIZED EXTRUDED ALUMINUM & NEOPRENETHIS SEAL SHOULD BE INSTALLED WITH THE ADJUSTMENT AT THE MIDPOINT TO ALLOW FOR FURTHER ADJUSTMENT

W- 43SPRING LOADED ADJUSTABLE PERIMETER SEAL CLEAR ANODIZED EXTRUDED ALUMINUM & PILE

1 5/32"[29.4mm]


9/16"[14.3mm]

W- 44SPRING LOADED ADJUSTABLE PERIMETER SEAL CLEAR ANODIZED EXTRUDED ALUMINUM & VINYL

1 5/32"[29.4mm]


9/16"[14.3mm]

W- 45SPRING LOADED ADJUSTABLE PERIMETER SEAL CLEAR ANODIZED EXTRUDED ALUMINUM & CLOSED CELL NEOPRENE

1 1/8"[28.6mm]


13/16"[20.6mm]

9/16"[14.3mm]


1 1/4"[31.8mm]


13/16"[20.6mm]

ULR

C

CLASSIFIED

ULR

C

CLASSIFIED

ULR

C

CLASSIFIED

SPRING LOADED ANDADJUSTABLE ASTRAGALS


35

1-5/32"[29.4mm]

ADJUSTING RANGE1/2" [12.7mm]9/16"

[14.3mm]

W- 40PSPRING LOADED ADJUSTABLE ASTRAGALCLEAR ANODIZED EXTRUDED ALUMINUM & PILE

1-5/32"[29.4mm]


[14.3mm]

W- 40SPRING LOADED ADJUSTABLE ASTRAGALCLEAR ANODIZED EXTRUDED ALUMINUM

1-1/8"[28.6mm]

MAXIMUM DISTANCE BETWEEN DOORS

1/2" [12.7mm]5/8"

[15.9mm]

W- 40MMAGNETIC ASTRAGALCLEAR ANODIZED EXTRUDED ALUMINUM-PROVIDED AS TWO PIECE SET

1-5/32"[29.4mm]


[14.3mm]

W- 40VSPRING LOADED ADJUSTABLE ASTRAGALCLEAR ANODIZED EXTRUDED ALUMINUM & VINYL

7/8"[22.2mm]

ADJUSTING RANGE1/8" TO 3/8" [3.2 TO 9.5 mm]

9/16"[14.3mm]

W- 41SPRING LOADED MORTISED ASTRAGALCLEAR ANODIZED EXTRUDED ALUMINUM & PILE

NEW

ASTRAGALS


LISTED

ULR

C

CLASSIFIED

1 7/16" [36.5mm]

1 3/4"[44.5mm]

W-5 CLEAR ANODIZED ALUMINUMAND VINYL

1/4"[6.4mm]

1" [25.4mm] 7/8"[22.2mm]

1 5/16"[33.3mm]

W-25 CLEAR ANODIZED ALUMINUMAND NYLON BRUSH

7/32"[5.6mm]

W-7 SECURITY ASTRAGAL

JAMBDOOR

2 1/2" [63.5mm]

1/8"[3.2mm]

3/16"[4.8mm]

PRIMED C.R. STEEL c/w SECURITY SLEEVE

EXTRUDED ALUMINUMW-8W-8PW-8SL

EXTRUDED ALUMINUM WITH PILE

1 3/4"[44.5mm]

3/16"[4.8mm]

1/8"[3.2mm]

W-8SP AS ABOVE, PRIMED FINISH

W-8SS STAINLESS STEEL, SEE PG. 20

W-8S C.R. STEEL WITH CONDITIONED EDGES

W-9W-9S

1 3/4"[44.5mm]

1"[25.4mm]

7/32"[5.6mm]

EXTRUDED ALUMINUM WITH PILE

EXTRUDED ALUMINUM WITH SILICONE

EXTRUDED ALUMINUM WITH SILICONE

NEW

(Optional: Neoprene Seal)

KNC SOUND CONTROL SYSTEM


37

CT-70

SEALED DOOR STC30

30303030

40

39403938

50

43434142

60

46444144

THRESHOLD AUTOMATICDOOR BOTTOM

GASKET/SEAL

CT-70CT-71CT-72CT-71

CT-50CT-50CT-50CT-51

W-45W-18W-15W-13

CT-71

CT-72

EXTRUDED ALUMINUM & VINYL

1/2" [12.7mm]

1/4" [6.4mm]

5" [127mm]


1"[25.4mm]

1/2"[12.7mm]

4" [101.6mm]


1/2" [12.7mm]

1/4" [6.4mm]

5" [127mm]

NEOPRENE

LISTED

LISTED

KNC SOUND CONTROL SYSTEM


1/4" [6.4mm]


1"1" [25.4mm]

3/16" [4.8mm]

1 7/16" [36.5mm]


3/16" [4.8mm]

1 17/32" [38.9 mm]

1 1/4" [31.8mm]

5/32" [4mm]


3/8" [9.5mm]7/16" [11.1mm]

1" [25.4mm]

1 1/2" [38.1mm]

CT-50 EXTRUDED ANODIZED ALUMINUM& NEOPRENE SEAL OR FELT INSERT

9/16"

1 13/16"[46mm]

5/8" Max. Drop

[14.3mm]

1 1/2"[38.1mm]

17/32"[13.5mm]

1 3/16"[30.2mm]

5/8" Max. Drop

5/16"[7.9mm]

CT-51EXTRUDED ANODIZED ALUMINUM& NEOPRENE SEAL OR FELT INSERT


1 1/8"[28.6mm]


13/16""[20.6mm]

9/16"[14.3mm]

LISTED

ULR

C

CLASSIFIED

LISTED LISTED

LISTED


39

PRODUCT # PAGE# PRODUCT# PAGE# PRODUCT # PAGE#

CT-1 16 CT-51 22 &38 W-8 36CT-10 9 CT-51F 22 W-8P 36CT-100 17 CT-52 23 W-8S 36CT-101 17 CT-52B 23 W-8SP 36CT-103 17 CT-52F 23 W-8SS 20 & 36CT-104 17 CT-52S 23 W-9 36CT-106 17 CT-52SS 20 W-11 26CT-10SS 20 CT-53 23 W-13 28 & 38CT-11 9 CT-53B 23 W-13S 26CT-12 9 CT-53F 23 W-13S-2 26CT-16 16 CT-53S 23 W-13S-SS 20CT-175 17 CT-54 24 W-13SS 20CT-20/3 18 CT-54N 24 W-14 28CT-20/3A 18 CT-55 25 W-15 28 & 38CT-20/4 18 CT-60 16 W-16N 29CT-20/4A 18 CT-61 16 W-16P 29CT-20/5 18 CT-610 6 W-16S 29CT-20/5A 18 CT-611 6 W-16V 29CT-21/2 19 CT-612 6 W-17N 29CT-21/2A 19 CT-64 6 W-17S 29CT-21/3 19 CT-65 6 W-18 30 & 38CT-21/3A 19 CT-66 6 W-19 26CT-21/4 19 CT-67 6 W-20N 30CT-21/4A 19 CT-68 6 W-20P 30CT-21/5 19 CT-69 6 W-20S 30CT-21/5A 19 CT-70 37 W-21 32CT-22/138 18 CT-704 8 W-22 32CT-22/138A 18 CT-705 8 W-23 27 & 30CT-22/3 18 CT-706 8 W-24S 27CT-22/34A 18 CT-71 37 W-25 36CT-22/3A 18 CT-72 37 W-25S 27CT-22/4 18 CT-730 24 W-26-1 27CT-22/4A 17 & 18 CT-74 12 W-26-2 27CT-227 19 CT-745 25 W-26-3 27CT-23 17 & 18 CT-746 25 W-27 30CT-27 19 CT-747 25 W-28 33CT-31 16 CT-748 25 W-29 33CT-32 9 CT-75 12 W-31 33CT-36 16 CT-76 12 W-32N 31CT-39 16 CT-80 12 W-32P 31CT-406 14 CT-804 8 W-32S 31CT-407 14 CT-805 8 W-33S 27CT-408 14 CT-806 8 W-34S 27CT-409 14 CT-807 8 W-35-1 27CT-40N 7 & 11 CT-808 8 W-35-2 27CT-40P 7 & 11 CT-81 12 W-35-3 27CT-40S 7& 11 CT-83 12 W-37-1 27CT-410 14 CT-86 12 W-38S 26CT-410-2 14 CT-87 12 W-40 35CT-41-1 13 & 14 CT-9 9 W-40M 35CT-42-1 13 & 14 CT-909 10 W-40P 35CT-43-1 13 & 14 CT-910 10 W-40V 35CT-44 14 CT-911 10 W-41 35CT-44-1 13 & 14 CT-912 10 W-42 34CT-45 14 CT-913 10 W-43 34CT-45-1 13 & 14 CT-914 10 W-44 34CT-46 14 CT-915 10 W-45 34 & 38CT-47 15 CT-916 10 W-47 31CT-47-1 13 CT-94 16 W-47S 31CT-47-1S 13 CT-95 16 W-48 34CT-47S 15 CT-9SS 20 W-49 31CT-48 15 W-50S 31CT-48S 15 W-1 & W-1F 28 W-61 31CT-49 15 W-2 & W-2F 28 W-66 32CT-49-1 13 W-3 33 W-87P 33CT-49S 15 W-4 26 W-88N 33CT-50 22 & 38 W-5 36 W-88P 33CT-50F 22 W-6 28 6216 32

INDEX

Dimensionally permanent, quiet, dependable sliding and folding door hardware for all applications

Canadian owned and operated for over 60 years www.kncrowder.comMay 2011

K. N. CROWDER AGENTSBRITISH COLUMBIAShoreline Sales Agency Ltd.Unit 140-84 North Bend St. Coquitlam, BC V3K 6H1Dick Elrick [email protected] FAX 604-552-5598

ALBERTAN.H. Collin & Associates6149-6 Street SE, Calgary, AB T2H 1L9Dean Collin [email protected] FAX 403-287-3061N.H. Collin & Associates#203-15735-114 Ave., Edmonton, AB T5M 2Z3Keith Foster [email protected] FAX 780-483-0490

MANITOBA/SASKATCHEWANB.L. Webber254 Overdale Street, Winnipeg, MB R3J 2G3Brenda Webber [email protected] FAX 204-895-3709

ONTARIOD.M.B. Sales Inc.Dave Brown [email protected] FAX 519-940-3493Mike Crompton [email protected] Stillwell [email protected]

QUEBÉCARDLes Agences Réal Demers Inc. (Head Office)10800 Racette Avenue, Montréal-Nord, QC H1G 5H6Réal Demers AHC [email protected] Demers AHC [email protected] Demers [email protected] Morin AHC [email protected] Beaudry [email protected] Richard [email protected] FAX 514-387-7780

Ard/Est du Quebéc (Branch)47 Rue Martel, Quebec City, QC G2B 2W6Denis Martel AHC [email protected] FAX 481-845-9409

Ard/Estrie & Centre du Quebéc (Branch)1043 Rue Antoine, Canton de Magog, QC J1X 3W2Simon Cournoyer AHC [email protected] FAX 819-843-2177

ARD/Région de la Capitale-Nationale (Branch)14, Chemin du Lac Bruûlé, Low, QC H0X 2C0Norm Labelle [email protected] F. France [email protected] FAX 819-843-2177

ATLANTIC PROVINCESAtlantic Hardware Consultants Ltd.15 Biggs Drive - Unit BRiverview, NB E1B 3Y8Terry Dolan [email protected] FAX 506-387-9102

MANUFACTURED BY:

K. N. CROWDER MFG. INC. K. N. CROWDER INC.1220 BURLOAK DRIVE 210 EIGHT STREET SOUTHBURLINGTON, ONTARIO, CANADA LEWISTON, NEW YORK, U.S.A.L7L 6B3 14092905-315-9788 FAX: 905-315-8090 716-754-8247 QUALITY SLIDING DOOR HARDWARE

TOLL FREE PHONE: 1-866-999-1KNC (1562)

TOLL FREE FAX: 1-800-567-0123 www.kncrowder.com [email protected]

SLIDING DOOR HARDWARE FOOTGRILLES/FLOOR MATS DOOR LITES AND LOUVERS

OTHER PRODUCTS BY K. N. CROWDER MFG. INC.

Documents

PRODUCT CATALOGUE T CATALOGUE APRIL 2010K. N. CROWDER MFG. INC. THRESHOLDS, WEATHERSTRIP, ASTRAGALS, AUTOMATIC DOOR BOTTOMS & STAIR NOSINGS PRODUCT CATALOGUE APRIL 2010