Embed Size (px)
Citation preview
PRODUCT CATALOGUE
communicating solutions
New to the MetroCONNECT Carrier Ethernet Demarcation family; the FCM10G05 supports services up to 10Gbps with all the same features as the 1Gbps variants, including comprehensive Layer-2 & Layer-3 Circuit Activation Testing and In-Service SLA Monitoring.
Contents:
Ethernet Service Delivery Page 2Carrier Ethernet Demarcation Page 4
Network Performance Assurance Page 5
Fibre & Copper Transceivers Page 6
Passive WDM Multiplexers Page 7
Fibre Modems & TAPs Page 8
Media Converters Page 9
Rackmount Page 9
Data Interface Converters Page 10
Multiplexers Page 11
ABOUT METRODATAMetrodata Ltd. is a long-established UK designer and manufacturer of Telecoms Equipment. Based near London, the company has been a supplier to Telecoms Service Providers, Corporate Enterprises and Governmental organisations worldwide since 1989. The company’s products are manufactured in the UK with a strong emphasis on design and production quality, with 100% of production fully tested prior to dispatch.
Metrodata has a particular focus on Interface Conversion, Metro-Edge and Network Access solutions. Our standard portfolio extends from simple ‘plug-and-play’ connectivity products through to Multiplexers and Managed Service Delivery Solutions for the Telecoms Carrier market. Our technology expertise encompasses each of Ethernet, Fibre, SDH/PDH, Asynchronous Transfer Mode (ATM) and Serial networking. Most recently, our ‘MetroCONNECT’ Ethernet Service Demarcation, ‘MetroWAVE’ Transceiver and Optical Multiplexer and ‘NetTESTER’ Test & Monitoring solution families have been at the forefront of both our Development Engineering focus and our Sales growth.
RECENT INTRODUCTIONS!
www.metrodata.co.uk Tel: +44 (0) 1784 744700Fax: +44 (0) 1784 744701
MetroCONNECT - MANAGED ETHERNET SERVICE DELIVERY & CARRIER ETHERNET DEMARCATION
A comprehensive set of tools for Network Performance Assurance, offering cost effective, remotely manageable circuit testing and monitoring for LAN and WAN Ethernet / IP Services.
NetTESTER - NETWORK TEST & MONITORING
MetroWAVE - FIBRE & COPPER TRANSCEIVERS
Over the past few years, network-connected equipment has evolved to use, almost exclusively, ‘pluggable’ fibre transceivers rather than the historic fixed interfaces which were generally soldered directly onto circuit boards.
Metrodata supplies all variants of Fibre and Copper Transceivers, for use both with our own equipmentand third party networking products from all leading vendors.
communicating solutions
2
ORDERING INFOPART CODES:
AC PSU DC PSUWC1000 80-05-541 80-21-541WCM1100 80-70-542 80-71-542WCM1101 80-70-548 80-71-548WCM1400 80-70-4542 80-71-4542WCM1400BNC 80-70-4572 80-71-4572WCM1800 80-70-8542 80-71-8542WCM1800BNC 80-70-8572 80-71-8572WCM1820 80-70-82542 80-71-82542WCM1820BNC 80-70-82572 80-71-82572WCM3100 80-70-543 80-71-543WCM3200 80-70-2543 80-71-2543WCM3400 80-70-4543 80-71-4543WCM5100 80-70-547 80-71-547WCM-SERIAL 80-70-545 80-71-545WC-SERIAL 80-05-545-1 80-21-545-1LHM1000 80-70-544 80-71-544
The MetroCONNECT WCM and LHM range of managed Ethernet Converters support:LEASED LINES: Clear Channel or Fractional E1/T1, Framed E3/DS3, Framed STM-1/OC-3SERIAL: EIA530, V.35, X.21, RS449, RS232, HSSI
The range offers the following as standard:Carrier Ethernet OAM (802.3ah & 802.1ag)Traffic Prioritisation & Rate LimitingPort Looping and LAN/WAN circuit testingComprehensive Management via Terminal Connection, Telnet & Web InterfaceSSH & TACACS+ For Secure Access
MANAGED ETHERNET DELIVERY
E1/T1 SERVICES
E3/DS3 SERVICES
STM1/OC3 SERVICES
SERIAL SERVICES
WCM5100:ETHERNET EXTENSION OVER RESILIENT STM-1 OR OC-3 SERVICES2x RJ45 PLUS 1x SFP ETHERNET CONNECTIONSGFP ENCAPSULATION WITH VCAT/LCAS, 1x VC4 AND Nx VC3 POINT-TO-POINT/MULTIPOINT TOPOLOGIES SUPPORTED
WC1000:ETHERNET EXTENSION OVER E1/T1 SERVICESWC1000 SUPPORTS BASIC PLUG & PLAY RJ45 ETHERNET AT 10/100NMPSWCM1100 SUPPORTS MANAGED RJ45 & SFP ETHERNET CONNECTIONS AT UP TO 1GBPSWCM1101 SUPPORTS MANAGED RJ45 ETHERNET AT 10/100MBPS
WCM1400: (4 x E1/T1 Ports) WCM1820: (16 x E1/T1 Ports)
WCM3100: WCM3200: (2 x E3/DS3 Ports)ETHERNET EXTENSION OVER FRAMED E3/DS3 SERVICES2x RJ45 PLUS 1x SFP ETHERNET CONNECTIONSGFP ENCAPSULATION WITH VCAT/LCAS, 1x VC4 AND Nx VC3 POINT-TO-POINT/MULTIPOINT TOPOLOGIES SUPPORTED
WCM-SERIAL MANAGED LAN EXTENSION OVER X.21, V.35, EIA-530 UP TO 20MBPSWC-SERIAL UNMANAGED PLUG ‘N’ PLAY LAN EXTENSION OVER X.21, V.35, EIA-530 UP TO 20MBPSLHM1000 MANAGED LAN EXTENSION OVER HSSI UP TO 52MBPS
METROCONNECT MANAGED LAN EXTENSION & CPE FAMILY
WCM3400: (4 x E3/DS3 Ports)
ETHERNET EXTENSION OVER MULTIPLE ‘BONDED’ E1 OR T1 SERVICESSUPPORT FOR UP TO 4x, 8x OR 16x ‘BONDED’ E1/T1 SERVICES FOR INCREASED ETHERNET BANDWIDTHRJ45 OR BNC PRESENTATION FOR E1, 2x RJ45 PLUS 1x SFP ETHERNET CONNECTIONSGFP, VCAT/LCAS POINT-TO-POINT AND POINT-TO-MULTIPOINT TOPOLOGIES SUPPORTED
WCM1100:
WCM1800: (8 x E1/T1 Ports)
WCM1101:
WCM-SERIAL: WC-SERIAL: LHM1000:
communicating solutions
MANAGED ETHERNET DELIVERY The MetroCONNECT MC12000 platform offers a high density Ethernet Aggregation and Service Delivery solution for fibre or copper distribution from core network to customer sites, at which MetroCONNECT stand alone CPE devices may be deployed.
The MC12000 is a 4U, 19” managed chassis system supporting resilient power supplies and high port density. All modules support hot-swap.
A variety of ‘last mile’ Ethernet service delivery transports and topologies are supported including:
ORDERING INFOPART CODES:
CodeChassis and single AC PSU 80-16-021-1Chassis and dual AC PSU 80-16-022-1Chassis and single DC PSU 80-16-031-1Chassis and dual DC PSU 80-16-032-1PSU Blanking Plate 80-16-105Interface Card Blanking Plate 80-16-107AC PSU Module 80-16-110DC PSU Module 80-16-115Spare Management Module 80-16-120-1
Interface CardsFCC9000 80-16-933WCC1400 80-16-4542-1WCC1800 80-16-8542-1WCC3200 80-16-2543-1WCC5200 80-16-2547WCC-Serial 80-16-545-1FC1000/MM 80-15-910FC1100/SM SH 80-15-918FC1200/SM LH 80-15-919FC3000/MM 80-15-920FC3100/SM SH 80-15-921FC3200/SM LH 80-15-922FC4000/MM 80-15-915FC4100/SM SH 80-15-916FC4200/SM LH 80-15-917
3
INTERFACE MODULES
METROCONNECT MC12000 SERVICE DISTRIBUTION CHASSIS
FC3X00 FAMILYE3/DS-3 G.703 ELECTRICAL OVER FIBRE
FC4X00 FAMILYSTM-1/OC-3 ELECTRICAL OVER FIBRE
FC1X00 FAMILYE1 G.703 ELECTRICAL OVER FIBRE
SDH/PDH SERVICE DELIVERY / EXTENSION
WCC1X00 FAMILYETHERNET OVER UP TO 4 OR 8 SEPARATE OR ‘BONDED’ E1/T1 SERVICES
WCC3200ETHERNET OVER 2 SEPARATE OR ‘BONDED’ E3/DS3 SERVICES
WCC5200ETHERNET OVER 2 STM-1/OC-3 SERVICES
WCC-SERIALETHERNET OVER SERIAL-INTERFACED SERVICES
FCC90006-PORT MIXED MEDIA GIGABIT ETHERNET SWITCH OR DUAL MEDIA CONVERTER
ETHERNET SERVICE DELIVERY / EXTENSION
• STM-1/OC-3 • Serial
• Fibre • Clear channel or fractional E1/T1• Framed E3/DS3
communicating solutions
4
ORDERING INFOPART CODES:
AC PSU DC PSUFCM9003 80-70-945 80-71-945FCM9005 80-70-944 80-71-944
FCM9005 Redundant AC PSU 80-74-944FCM10G05 AC PSU 80-70-951FCM10G05 DC PSU 80-71-951FCM10G05 Dual PSU 80-74-951
CARRIER ETHERNET DEMARCATION
FCM9003:2X 100/1000BASET PORTS AND 1X ‘SFP’ PORT WITH FLEXIBLE ‘LAN/WAN’ PORT DEFINITIONV-LAN PUSH/POP FOR SERVICE CONFIGURATION, INCLUDING Q-IN-QCUSTOM ‘METROSAM’ HARDWARE FOR TEST AND REPORTING FUNCTIONSJUMBO FRAME SUPPORT (UP TO 10KBYTE PACKETS)COMPREHENSIVE L2CP TUNNELLING CONTROLMANAGEMENT VIA LOCAL TERMINAL CONNECTION, TELNET/SSH, WEB BROWSER AND SNMPSERVICE ACTIVATION TESTING VIA RFC2544 AND Y.1564, USING LAYER-2 MAC TRAFFIC AND LAYER-3 IP TRAFFICIN-SERVICE MONITORING VIA IEEE802.1AG CFM / ITU-T Y.1731 AND TWAMP-LITE
FCM9005:4X 100/1000BASET & 1X ‘SFP’ LAN PORTS AND 100/1000BASET OR SFP WAN PORTTWO-LEVEL V-LAN PUSH/POP FOR SERVICE CONFIGURATION, INCLUDING Q-IN-QMORE ADVANCED METROSAM ARCHITECTURE SUPPORTING IN-SERVICE FLR MONITORINGDUAL-REDUNDANT AC PSU VARIANTS AVAILABLESERVICE ACTIVATION TESTING VIA RFC2544 AND Y.1564, USING LAYER-2 MAC TRAFFIC AND LAYER-3 IP TRAFFICIN-SERVICE MONITORING VIA IEEE802.1AG CFM / ITU-T Y.1731 AND TWAMP-LITE
Compared with traditional SDH/PDH infrastructures, modern Packet-switched networks are inherently less ‘deterministic’. Telecoms Carriers and Service Providers require not only to provision ‘Carrier Ethernet’ WAN circuits, but to provide comprehensive ‘birth certificate’ details of the end-to-end performance characteristics of their services relative to customer ‘Service Level Agreements’ (SLAs). They may also need to monitor in-service performance to ensure that under differing load conditions, performance does not dip below contracted levels.
Metrodata’s line of cost-effective Carrier Ethernet Demarcation Devices support advanced configuration and management facilities including multi-level VLAN tag push/pop and L2CP (Layer-2 Control Protocol) handling. Comprehensive support for performance assurance protocols include IEEE 801.1ag, ITU-T Y.1731 and TWAMP (Two-Way Active Measurement Protocol). Each of our products include Metrodata’s custom ‘MetroSAM’ (Service Assurance Module) hardware for test traffic generation, packet loopback and traffic analysis, enabling support for high-precision circuit ‘turn-up’ test reporting to standard RFC2544 and ITU-T Y.1564 test profiles, detailing such characteristics as Committed Information Rate (CIR), Packet-Loss Ratio (PLR), Delay (or ‘latency’) and Delay Variation (or ‘jitter’).
Current products include:
FCM10G05ADVANCED ETHERNET DEMARCATION DEVICE FOR 10GBPS SERVICESSFP+ PORTS FOR 10GBPS LAN & WAN CONNECTIONS PLUS ADDITIONAL 1GBPS LAN PORTSSERVICE ACTIVATION TESTING AND IN-SERVICE MONITORING FUNCTIONALITY SIMILAR TO 1GBPS PRODUCTS
CarrierNetwork
SLA
SLA
SLA
Customer Network
Customer Network
Customer Network
Multiple TrafficTypes/Flows
Ethernet Services:E-Line, E-LAN, E-Tree
SLA Determination,Verification, Reporting
communicating solutions
NETWORK PERFORMANCE ASSURANCEThe NetTESTER family offers a range of powerful & versatile Ethernet network test and monitoring capabilities for the Enterprise sector. Intended for ‘always-on’ deployment at key points throughout the network, NetTESTER represents a new paradigm in Performance Assurance.
Most frequently deployed at locations throughout a multi-site Wide Area Network, NetTESTER devices may be installed either directly in the ‘data path’, between for example a Service Provider’s WAN termination point and the Enterprise’s own LAN equipment, or simply on any convenient Switch or Router port within the LAN. In the former case, NetTESTER units are fully transparent to user traffic and yet perfectly positioned for test, monitoring and impact analysis applications. In the latter, whilst not directly in the data path between LAN and WAN, NetTESTER is ready ‘on-demand’ for test-traffic generation, loop-back and analysis of traffic performance to/from any other similarly equipped site within the network, and can provide ‘always-on’ background monitoring and alarming in the event of performance degradation relative to pre-defined threshold criteria.
Both NT1003 and NT1005 products (each available with a variety of PSU options for flexibility and resilience), include Metrodata’s custom ‘MetroSAM’ (Service Assurance Module) hardware for test-traffic generation and loop-back, supporting industry-standard test profiles RFC 2544 and ITU-T Y.1564, for both Layer-2 (Ethernet Switched) and Layer-3 (IP Routed) environments. Each device also supports background monitoring via standard protocols including ITU-T Y.1731, for Ethernet Switched environments, and TWAMP (‘Two-way Active Measurement Protocol’), for IP-Routed infrastructures.
Users access the NetTESTER either via a local terminal/emulator, or more normally remotely across the network from a Management console application via Telnet/SSH or Web Browser, to configure and instigate test procedures or to monitor results. In the case of background monitoring, SNMP ‘TRAP’ alarms are issued in the event of a breach of pre-determined performance threshold parameters, including throughput, delay (latency), delay variation (jitter), packet-loss, and overall ‘uptime’.
ORDERING INFOPART CODES:
AC PSU DC PSUNT1003 80-70-948T 80-71-948TNT1005 80-70-948T 80-71-948T
NT1005 Redundant AC PSU 80-74-948T
1U Rackmount kit 80-05-256
COMPREHENSIVE NETWORK TESTING AND MONITORING
LAN & WAN
• Complete transparency to regular traffic when embedded within the active data-path• Copper and fibre physical connection & traffic monitoring, up to 1Gbps throughput• SFP DDM statistics and option for integrated & automated ‘OTDR’ fibre fault location reporting
On-demand Testing
• Embedded test traffic generation, loop-back & analysis, accurate to micro-second resolution• RFC2544, ITU-T Y.1564 and ‘custom’ test profiles, for both Layer-2 (Ethernet MAC) and Layer-3 (IP) traffic• SNMP data-retrieval support for monitoring/charting of key data over extended time-periods at NOC platform
‘Always On’ SLA Monitoring
• Delay (latency) and delay-variation (jitter) monitoring via ITU- T.1731 and TWAMP-lite• Alarming in the event of pre-defined ‘Service Level Agreement’ (SLA) breach such as, for example, latency growing above a speci fied threshold• Overall network visibility, configuration/management access and alarming via Management Platform
Management & Alarms
• Management via local terminal or remotely via Telnet/secure SSH or Web Browser application• TACACS+ for management user authentication• Comprehensive alarming with support for SNMP ‘TRAP’ alerts to NOC platform(s).
5
communicating solutions
6
MORE INFORMATIONFIBRE & COPPER TRANSCEIVERSUnder the MetroWAVE brand, Metrodata offers interchangeable ‘plug-in’ Transceivers for Data Communications platforms including Switches, Routers and Servers from all major manufacturers. Metrodata supplies a wide variety of Transceivers in the most popular industry-standard formats. Accurate ‘vendor coding’ ensures compatibility with the major equipment vendors’ expensive ‘own-brand’ products.
The Metrodata team are specialists in Interface Matching for Networking and Communications products, and have experience in protocols including Ethernet, PDH/SDH, Serial, ATM and, most importantly, all aspects of Fibre Communications, including Wavelength Division Multiplexing (CWDM and DWDM).
Networking equipment has evolved to use pluggable transceivers rather than the historic fixed-format interfaces, typically soldered onto a circuit board. There are various different MSA (Multi-Source Agreement) standards for pluggable transceivers, although some of the most common varieties are shown below. Our prices are amongst the best in the industry, so please contact us for any of your transceiver requirements.
SFP FIBRE TRANSCEIVERSmall Form Factor Pluggable (SFP) is a compact, hot pluggable transceiver used in both Telecommunications and Data Communications applications. Standard fibre SFP transceivers have dual ‘LC’ connectors, whilst single-fibre ‘BiDi’, SFP transceivers present a single ‘LC’ or ‘SC’ connector. Operating speeds vary from 100Mbps to 4Gbps, supporting fibre links of up to 200km.
SFP+ OPTICAL TRANSCEIVEREnhanced Small Form Factor Pluggable (SFP+) transceivers use the same physical case format as SFP, but support operating speeds of 8Gbps and 10Gbps.SFP and SFP+ transceivers are readily available for both multi-mode and single-mode fibre applications and also for copper cable via both RJ45 and, albeit rarely, miniature dual co-axial connectors.
XFP TRANSCEIVERSlightly larger than SFP+ devices, XFP transceivers support 10Gbps Ethernet, 10Gbps Fibre Channel, SDH (STM-48) and Sonet (OC-192) applications.
QSFP+ TRANSCEIVEROffering 40Gbps connections via a number of multiplexed wavelengths, QSFP+ transceivers are slightly larger again than the XFP format.
For more details regarding our Transceiver offering:
Download our Range Guide(metrodata.co.uk/sfpguide)
Learn more online (metrodata.co.uk/sfp)
Contact Us(metrodata.co.uk/contact)
communicating solutions
7
ORDERING INFOPART CODES:
CodeMetroWAVE-8A 80-32-021MetroWAVE-9S 80-32-012MetroWAVE-D8-25 80-33-012MetroWAVE-D8-51 80-33-014MetroWAVE-D16 80-33-022MetroWAVE-D40P 80-33-032MetroWAVE-EDFA Call SalesMetroWAVE-DCM20 80-33-041MetroWAVE-DCM40 80-33-042MetroWAVE-DCM60 80-33-043MetroWAVE-DCM80 80-33-044MetroWAVE-DCM100 80-33-045
MetroWAVE-CWDMmeter 80-32-031MetroWAVE-DWDMmeter 80-32-032MetroWAVE-rack 80-32-051
PASSIVE WDM MULTIPLEXERSAlso under the MetroWave brand are our range of passive CWDM and DWDM optical multiplexers allowing independent services to be converged over a singlemode fibre pair. Each service is assigned a different wavelength, all of which are combined for transmission over a single Fibre Transmit/Receive pair. Many different applications, including Ethernet, Serial, TDM, and Fibre-Channel (SAN) can be supported.
These small cost-effective multiplexers are optically passive, offering excellent reliability.
METROWAVE-9S:9-CHANNEL PASSIVE (1471nm - 1611nm CWDM + 1300nm WIDEBAND) CWDM MULTIPLEXER WITH MONITOR PORT
METROWAVE-8A:8-CHANNEL PASSIVE (1271nm - 1411nm) CWDM MULTIPLEXER, CAN BE USED AS AN EXPANSION UNIT TO THE METROWAVE-9S
METROWAVE-CWDMMETER:MONITORS ALL 18 CWDM CHANNELS SIMULTANEOUSLY PLUGS INTO THE METROWAVE MONITOR PORT FOR EASY BUT SOPHISTICATED SYSTEM LEVEL DEBUG
Full range of vendor compatible fibre transceivers are available for either Metrodata or third party equipment including: SFP, SFP+, XFP, X2 and XENPAK, operating at a range of speeds up to 10Gbps, over 80km with CWDM or DWDM specifications.
METROWAVE-D8:8 CHANNEL PASSIVE DWDM 100GHz, C-BAND CH25 - CH32, UPLINK 1550NM (D8-25)CH51 - CH58, UPLINK 1530NM (D8-51)
METROWAVE-D16:16 CHANNEL PASSIVE DWDM 100GHz, C-BANDCH25 - CH40, UPLINK 1550NM
METROWAVE-DWDMMETER:MONITORS ALL 48 DWDM CHANNELS SIMULTANEOUSLY PLUGS INTO THE METROWAVE MONITOR PORT FOR EASY BUT SOPHISTICATED MONITORING
METROWAVE-D40P:40 CHANNEL PASSIVE DWDM, 100GHz C-BANDCH21 - CH60 ITU GRIDCONTROLLED TEMPERATURE (FOR SERVICE STABIITY), MAINTAINED BY DUAL HOT-SWAP POWER SUPPLY
METROWAVE-EDFA:ERBIUM DOPED FIBRE AMPLIFIER FOR LONG-DISTANCE SERVICE EXTENSIONTHREE OPTICAL C-BAND APPLICATIONS: BOOSTER / IN-LINE / PRE-AMPLIFIEROUTPUT POWER LEVELS FROM 13 ~ 22dDm SUPPORTEDGAIN OF 8 ~ 33dBm SUPPORTED
METROWAVE-DCM:DWDM DISPERSION COMPENSATION DEVICEG.652 FIBRE C-BAND 100% SLOPE COMPENSATIONTELCORDIA GR-2854-CORE AND GR1221-CORE STANDARD CERTIFICATION
communicating solutions
FIBRE MODEMS & TAPSMetrodata have an extensive product range providing different Fibre Optic Solutions:- Fibre Optic Modems (FOM) for E1, E3, DS-3 extension over fibre- Fibre Optic Modems (FOM) for RS232, Serial extension over fibre, e.g. X.21, V.35, EIA530, RS449, V.36- High-density Fibre TAPs
E1/ISDN-30 OVER FIBRE
ORDERING INFOPART CODES:
AC PSU DC PSUFC1000/MM 80-05-910 80-21-910FC1100/SMSH 80-05-918 80-21-918FC1200/SMLH 80-05-919 80-21-919
FC3000/MM 80-05-920 80-21-920FC3100/SMSH 80-05-921 80-21-921FC3200/SMLH 80-05-922 80-21-922
FIMO-232/MM 80-05-924 80-21-924FIMO-232/SMSH 80-05-925 80-21-925FIMO-232/SMLH 80-05-926 80-21-926
FIMO-2100 80-05-940 80-21-940
FIMO-2100 155MBPS SFPSMULTIMODE 2KM 1300NM 80-30-021SINGLEMODE 10KM 1300NM 80-30-031SINGLEMODE 40KM 1300NM 80-30-033SINGLEMODE 80KM 1550NM 80-30-042
FIBRE TAPsMULTIMODE 850NM 50/125UM 80-32-110MULTIMODE 850NM 62.5/125UM 80-32-111MULTIMODE 1300NM 50/125UM 80-32-120MULTIMODE 1300NM 62.5/125UM 80-32-121SINGLEMODE 1260NM-1620NM 80-32-110
FC1000:BNC/ RJ45 E1 TO MULTMODE FIBRE
FC1100:BNC/ RJ45 E1 TO SINGLEMODE SHORT HAUL
FC1200:BNC/RJ45 E1 TO SINGLEMODE LONG HAUL
FIMO-232:ASYNCHRONOUS RS-232STANDARD 9 WAY D-TYPEDTE OR DCE INTERFACEDATE RATE AGILEEXTEND UP TO 70KM
E3/DS-3 OVER FIBRE
SERIAL OVER FIBRE
FC3000:BNC E3/DS-3 TO MULTMODE FIBRE
FC3100:BNC E3/DS-3 TO SINGLEMODE SHORT HAUL
FC3200:BNC E3/DS-3 TO SINGLEMODE LONG HAUL
8
FIMO-2100:RESILIENT FIBRE UPLINKMULTI-STANDARD SERIAL INTERFACE UP TO 8.192MBPSRS-232, EIA530, X.21 AND V.35DTE OR DCE INTERFACECONFIGURABLE IN 64KBPS STEPSEXTEND UP TO 70KM
MetroWAVE-TAP:SUPPORTS UP TO 24 DUPLEX TAPPED NETWORK CONNECTIONS IN 1U RACK SPACESUPPORTS 10MB, 100MB, 1GB AND 10GB DATA TRAFFICMONITOR PORTS AVAILABLE FOR NON-EVASIVE SYSTEM DEBUGSINGLE MODE AND MULTIMODE OPTIONS AVAILABLEUNPOWERED PASSIVE DEVICE FOR HIGHEST POSSIBLE RELIABILITY
MetroWAVE FIBRE TAP
ALL PRODUCTS PAYLOAD AND PROTOCOL TRANSPARENT - SUITABLE FOR A WIDE RANGE OF APPLICATIONS INCLUDING ISDN-30 FOR PBX ‘VOICE TRUNKS’
ALL PRODUCTS PAYLOAD AND PROTOCOL TRANSPARENT
communicating solutions
9
MEDIA CONVERTERSMetrodata have a wide range of products for transporting various technologies over fibre including Ethernet, STM-1/OC-3 and STM-4/OC-12.
ORDERING INFOPART CODES:
AC PSU DC PSUFC5000 SX 80-05-934 80-21-934FC5000 LX 80-05-935 80-21-935
FCM9000 80-05-933 80-21-933
FC4000/MM 80-05-915 80-21-915FC4100/SMSH 80-05-916 80-21-916FC4200/SMLH 80-05-917 80-21-917
FC-GIGE 80-05-923 80-21-923FC2000 80-05-911 80-21-911FC2500 80-05-912 80-21-912
RMK2R 80-05-256 80-05-256RMK18 80-05-250 80-05-255
FC-GigE:MEDIA CONVERSION BETWEEN 1000BASE-SX & 1000BASE-LX850NM TO 1300NM WAVELENGTH CONVERSION1000BASE-LX = 10K OVER SINGLEMODEZERO TOUCH, PLUG AND PLAY INTERFACE
FC5000:CONVERSION FROM 10/100/1000BASE-T TO 100/1000BASE-XSFP MODULE FOR 1000BASE-SX OR 1000BASE-LX1000BASE-SX = 550M OVER MULTIMODE 1000BASE-LX = 10KM OVER SINGLEMODELINK STATE FORWARDINGZERO TOUCH, PLUG AND PLAY INTERFACE
ETHERNET COPPER TO FIBRE
STM-1 ELECTRICAL TO FIBRE
MULTIMODE TO SINGLEMODE FIBRE
FC4000:STM-1/OC-3 BNCELECTRICAL TO MULTIMODEPLUG AND PLAY INTERFACE
FC4100:STM-1/OC-3 BNCELECTRICAL TO SINGLEMODE SHORT HAULPLUG AND PLAY INTERFACE
FC4200:STM-1/OC-3 BNCELECTRICAL TO SINGLEMODE LONG HAULPLUG AND PLAY INTERFACE
FC2000 / FC2500:STM-1/OC-3 MULTIMODE TO SINGLEMODE SHORT/LONG HAUL100BASEFX MULTIMODE TO SINGLEMODE SHORT/LONG HAULPLUG AND PLAY INTERFACE
RMK2R: 2 UNIT 1U 19” RACKMOUNT KIT HOLDS UP TO 2 UNITS OF: WCM, FCM, DC, FC, WC, BC, LH, LV familiesHOLDS AC, DC OR MIXED PSU UNITS MIXTURE OF PRODUCTS ALLOWED
RMK18: 18 UNIT 6U 19” RACKMOUNT KIT HOLDS UP TO 18 UNITS OF: WCM, FCM, DC, FC, WC, BC, LH, LV familiesMIXTURE OF PRODUCTS ALLOWEDAVAILABLE IN AC OR DC PSU
RACKMOUNT KITS
communicating solutions
DATA INTERFACE CONVERTERSMetrodata support a wide range of standard telco, router, satcom and encryptor data interface converters. Typically used for converting Nx64Kbps and E1, E2, E3 and DS-3 leased lines to serial data interfaces.
E1 / E3 PRODUCTS
ORDERING INFOPART CODES:
AC PSU DC PSUDC1000 80-05-210 80-21-210DC1200 80-05-212 80-21-212DC3000 80-05-230 80-21-230DC3200 80-05-232 80-21-232DC3445 80-05-234 80-21-234
FM4000BNC TO X.21
80-05-005 80-21-005
FM4000BNC TO V.35
80-05-006 80-21-006
FM4000RJ45 TO X.21
80-05-007 80-21-007
FM4000RJ45 TO V.35
80-05-008 80-21-008
BC1000 80-05-556 80-21-556BC1100 80-05-557 80-21-557BC3000 80-05-566 80-21-566BC3100 80-05-567 80-21-567
DC1000:E1 G.703 TO X.21E1 BNC OR RJ45CLEAR CHANNEL
DC1200:E1 G.703 TO V.35E1 BNC OR RJ45CLEAR CHANNEL
DC3000:E1 G.703 TO X.21E1 BNC OR RJ45G.704 Nx64Kbps
DC3200:E1 G.703 TO V.35E1 BNC OR RJ45G.704 Nx64Kbps
FM4000:E1 CSU/DSUBNC TO X.21 BNC TO V.35RJ45 TO X.21 RJ45 TO V.35REMOTE MANAGEMENT OPTION
DC3445:E3 OR DS-3 TO HSSI CONVERTERDIP SWITCH SELECTABLE
10
BC1X00:THE BC1X00 BASEBAND CONVERTER ALLOWS THE LATEST GENERATION OF SERIAL LINK AND BULK ENCRYPTION DEVICES WITH LVDS/EIA-644 INTERFACES TO BE CONNECTED TO SATCOMS EQUIPMENT, ROUTERS AND RADIO SYSTEMS. ENCRYPTOR RESYNC IS SUPPORTED
LVDS TO HSSI & FIBRE CONVERTERS
BC3X00:THE BC3X00 BASEBAND CONVERTER ALLOWS THE LATEST GENERATION OF SERIAL LINK AND BULK ENCRYPTION DEVICES WITH LVDS/EIA-644 INTERFACES TO BE CONNECTED TO SATCOMS EQUIPMENT, ROUTERS, RADIO SYSTEMS AND FIBRE NETWORKS. ENCRYPTOR RESYNC IS SUPPORTED
communicating solutions
MULTIPLEXERSMetrodata offer a wide range of multiplexers, converging multiple Nx64Kbps services over E1, or multiple E1, T1, E3, DS-3 and Ethernet services over STM-1 or OC-3.
E1 SUB-RATE MULTIPLEXERS
ORDERING INFOPART CODES:
AC PSU DC PSUFM4200
BNC TO X.21 80-05-301 80-21-301BNC TO V.35 80-05-302 80-21-302RJ45 TO X.21 80-05-303 80-21-303RJ45 TO V.35 80-05-304 80-21-304
FM4500BNC TO X.21 80-05-009 80-21-009BNC TO V.35 80-05-010 80-21-010RJ45 TO X.21 80-05-011 80-21-011RJ45 TO V.35 80-05-012 80-21-012
MetroLAN1000SM SH 80-12-301 80-24-301SM LH 80-12-302 80-24-302MM 80-12-300 80-24-300
MetroLAN2000SM SH 80-12-311 80-24-311SM LH 80-12-312 80-24-312MM 80-12-310 80-24-310
Emux ChassisEmux-4 80-12-400 80-24-400Emux-8 80-12-401 80-24-401Emux-16 80-12-402 80-24-402
E1 - FIBRE MUX
FM4200:E1 DROP/INSERT MULTIPLEXER1 X E1 LINE PORT1 X E1 DROP PORT, 1 X SERIAL PORTREMOTE MANAGEMENT OPTION
FM4500:E1 DROP/INSERT MULTIPLEXER1 X E1 LINE PORT1 X E1 DROP PORT, 4 X SERIAL PORTREMOTE MANAGEMENT OPTION
SDH/FIBRE MUX
EMUX:COST EFFECTIVE 4, 8 OR 16 PORT E1 FANOUT OVER FIBRERESILIENT 1+1 FIBRE INTERFACE OFFERS AUTOMATIC SWITCH OVERREMOTE CONFIGURATION AND TESTING OF UNITS ACROSS THE NETWORKCOMPREHENSIVE MANAGEMENT & PERFORMANCE MONITORING OF BOTH DEVICE AND LINE SFP FIBRE MODULES ENABLE MANY TYPES OF FIBRE: MULTIMODE, SINGLEMODE, CWDM AND DWDM
METROLAN 1000:8 X ETHERNET PLUS 8 X E1 / T1 OVER SDH STM-1 / SONET OC-3
METROLAN 2000:8 X ETHERNET PLUS 8 X E1 / T1 PLUS 3 X E3/DS-3OVER SDH STM-1 / SONET OC-3
MAXIMUM FIBRE DISTANCESMM SMSH SMLH5KM 30KM 70KM
11
NOTE: BOTH METROLAN UNITS ARE ABLE TO BE USED AS ‘BACK TO BACK’ FIBRE MUXS
Metrodata LtdLaxton House, Crabtree Office VillageEversley Way, Egham, Surrey TW20 8RYU.K. Tel: +44 (0)1784 744700Fax: +44 (0)1784 744701E-mail: [email protected]: www.metrodata.co.uk
