Product Catalogue Maintenance dan WWTP

1

Maintenance

Solution and

Water &

Waste Water

Treatment

Solution

Product Catalogue

We are excel at tailoring solution, deliver

premium quality at the best price while

concern to the environment.

Product Catalogue

MAINTENANCE SOLUTIONFocust 101 5Super DegreaserFOCUST 103 6Oil Spill DispersantFocust 202 7Scale and Rust RemoverFocust 303 8Solvent DegreaserFocust 304 9Rust PenetrantFocust 308 10Paint RemoverFocust 507 11Rust Protection

WATER TREATMENT SOLUTIONFocust BT-99P 13Focust BT-99H 14Focust 401 15

WASTE WATER SOLUTIONFocust Floc WWTP 17Focust 801 18FOCUST 5050 19

COMPLETE PRODUCT LINEUP 21

4

Maintenance Solution

FOCUST 101Super DegreaserFormulate for cleaning purposes tomany kind of dirt and grime such asgrease, oil, fat and otherhydrocarbon that stick to metalsurface. Containing metal protectioncorrosion inhibitor, Focust 101 verysafe to be applied in many kind ofmaterial

Benefit- Non flammable- Able to dilute as per needed- Effective to remove dirt and grime- Contain corrosion inhibitor- Safe to metal used- Not cause damage to paint

5

ApplicationFocust 101 could be appliedmanually to the surface or combinewith cleaning equipment

PackagingPail @ 25 LitresDrum @ 200 Litres

FOCUST 103Oil Spill DispersantFocust 103 is specialized formulatedto neutralize oil waste orhydrocarbon in the water or hardsurface. Containing metal corrosioninhibitor, Focust 103 also can beused as degreaser for the metalsurface

Benefit- Non flammable- Non Toxic- Can be dilute as per needed- Non corrosive- Environmental Friendly

6

ApplicationFocust 103 applied manually or withhigh pressure wash and handsprayer


FOCUST 202Rust and Scale RemoverFOCUST 201P, specialized formulizedfor cleaning and remove rust andscale in the metal surface. It can beused to remove any kind and levelof rust and scale. It’s safe to thehuman and effective to remove rustand environmental friendly. Thisproduct is phosphate acid anddissolve to the water

Benefit- Non flammable- Able to dilute as per needed- Effective to remove rust- Safe to metal used- Not cause damage to paint- Contain corrosion inhibitorApplicationFocust 202 could be appliedmanually to the surface,circulatedto the plumbing equipment orcombine with cleaning equipment

PackagingPail @ 25 LitresDrum @ 200 Litres 7

FOCUST 303Solvent DegreaserFast drying solvent non flammable,as and electric resistor. Formulatefor cleaning purposes to removewaterproof grease and stain such asoil sludge and other oil base stain onthe material surface or any tools

Benefit- Non flammable- Non Toxic- High Dielectric Strength- Non corrosive- Fast Drying

8

ApplicationFocust 303 applied to the materialsurface with sprayer then clean withsponge or brush


FOCUST 304Rust PenetrantSolvent, propellant hydrocarbonbase and high quality solvent.Formulated for easy to bolt open orother mechanical. Its high for metalallows it to penetrate, seal outmoisture, attacking rust, lubricatesand preventing corrosion. Suitablefor petroleum industry, heavyindustry, automotive and housing

Benefit- Non Toxic- Odorless- Non irritated

9

ApplicationFocust 304 spray on the materialsurface. Wait for second to optimalpenetration at rust area

PackagingCan @ 4 LitresPail @ 25 LitresDrum @ 200 Litres

FOCUST 308Paint RemoverSolvent base product and not diluteto water. Focust 308 formulated toremove paint and rubber deposit toall metal surface (hard and softmetal), glass, concrete andaluminium. Very effective to removeand clean paint mould plastic

Benefit- Effective- Economic- Non korosif- Remove any type of paint

10

ApplicationFocust 308 spray on the materialsurface. Wait for minutes then cleanwith pressure water, brush orsponge

PackagingBottle @ 1 LitresPail @ 25 LitresDrum @ 200 Litres

FOCUST 507Rust ConverterFormulate to prevent rust processon the metal. Protection rustformulaic to give the film thickwhen applied to the surface ofmetal so as to hinder oxidation airand moisture causes rust. Very fitfor prevention rust out on thestorage room in metal machinery,and requiring automotiveequipment dicoating to preventfrom rust

Benefit- Prevent rust for longer time- Ease to use- Fast reaction- Odorless- Non Toxic

11

ApplicationClean surface material from rust andstain before coated then applied tothe material surface using brush orspray. Wait 30-60 minutes until itdry

PackagingPail @ 25 kg

12

Water TreatmentSolution

FOCUST BT-99PBoiler Treatmentscale prevention agent containing aspecial mixture with decompositionand separation methods ofphosphate to prevent deposit onboilers. Phosphate is used to settleCalcium Hardness solution in boilerwater. Interface decomposition andseparation of floating solids of anykind, attached to the surfaces in theboiler. This product is recommendedfor high-pressure boiler

Benefit- Easy to use- Economic- Good Scale Preventer- Reduce Fuel Consumption

13

ApplicationFOCUST BT- 99P must be usedcontinuously in a closed boiler. It ispreferable kept in a steam drum,although the application in the pre-boiler or feed water line is alsoallowed. Maintenance dosage is 30-50 ppm phosphate as PO4 in theboiler water. Proper dosagedepends on the operationalconditions of the system andoptimum dosage limitation will bedetermined by the technicians

PackagingPail @ 25 Kg

FOCUST BT-99HBoiler TreatmentFOCUST BT-99H is a hydrazinesolution use as an oxygen scavengerin boiler feed water. This productincorporates organic catalyst ofsuperior quality to speed upreaction event at a very lowtemperature.FOCUST BT-99H it doesn`t producedissolved solid therefore does notincrease blowdown.This feature is very important forhigh pressure boiler where dissolvesolid should be at the lowest level

Benefit- Easy to use- Economic- Reduce Fuel Consumption

14

ApplicationA continuous dose of FOCUST BT-99H via a chemical metering pumpis a strongly preferred. The requireddose of FOCUST BT-99H depends onoperation condition from thesystem containing 0.1 – 1.0 ppm ontreatment for boiler water.Technician will provide technicaladvice on the optimum treatmentrange


FOCUST CL-401Corrosion and ScaleInhibitorFOCUST CL-401 is Liquid compoundcontaining corrosion inhibitors andsequestering agents. It can be usedfor water scale and corrosionprotection for all closed fresh watercirculation systems such as :Diesel engine cooling water systemsCompressor cooling water systemsCentral heating systems

Benefit• Prevents scale deposition• Protection against rusting and

corrosion• Increases heat transfer efficiency• Non Chromate Product

15

ApplicationInitial treatment recommendationfor newly filled system is 1 litre ofFOCUST CL-401 per 100 litres offresh water in the system. Afterthrough mixing contain a sampleand check both pH value andphosphate content in ppm PO4.These measured using pH 7.8 to 10Test Kit and a Phospate Test Kit


16

Waste Water TreatmentSolution

17

FOCUST FLOC WWTPBasic of Poly Alum Complexcoagulant, special formulated toprovide maximum coagulation inwater and waste water treatment.Can be combined with anionic/cationic/ non-ionic floculant (notrecommended to mix )

Physical Properties- Appearance : Brown, Yellowish

Liquid- Specific Gravity 250 C : 1.185 –

1.220- Viscosity 250 C (Cps) : 4.0 – 5.0- AL2O3 (%) : 8 ± 0.5- Basicity (%) : 45 ± 0.5- PH (1% Sol.) : 3.0 ± 0.5- SO4 (%) : Max. 2%- Fe (%) : Max. 0.01 %- Pb, Ag, Zn : Negative- Solubility in water : Soluble

ApplicationFOCUST FLOC is has application in awide variety of system, actualtreatment levels in water and wastewater treatment and system shouldbe determined by jartest (laboratory test ) and field test withrange of dosage of 10 – 100 ppm of100% concentration and in range ofpH 7 – 8

PackagingTank Lorry 10-20 Ton

18

FOCUST 801Water Treatment Coagulantbasic of Poly Alumunium Complex,special formulated to providemaximum coagulation in water andwaste water treatment. Can becombined with anionic/ cationic/non-ionic floculant ( notrecommended to mix )

Physical Properties- Appearance : Brownish Liquid- Concentration : 100%- Specific Gravity 250C : 1.1 – 1.2- Solubility in water : Soluble- Ph ( 1% solution ) : 3 Min

Applicationapplication in a wide variety ofsystem, actual treatment levels ineach system and waste watershould be determined by jartest (laboratory test ) and field test withrange of dosage of 100 – 2000 ppmof 100% concentration and pH ofwaste water before coagulationbetween 7-10, 15-50 ppm for watertreatment depend on the turbidity

PackagingTank Lorry 10-20 Ton

19

FOCUST 505DefoamerDEFOAMER 5050 is active defoameremulsion which developed for pulpmill specially in washing operation orother process where foam appeartoo much.DEFOAMER 5050 is more efficientthan conventional defoamer, reducedadditive to the system and alsoreduced pitch problem.DEFOAMER 5050 is gooddispensability product and veryenvironmental friendly because ofinert reaction with chlor in bleachingstage as a DBD and DBF precursor

Physical Properties- Appearance : Milky white emulsion- Chemical Composition : Emulsion

of silfoam- Ionic Character : Non Ionic- Specific Gravity : 1.01 ± 0.05 g/ml

ApplicationAdded into system by dosing pump,the optimum quantity and additionare determined bytrial.

PackagingGallon @ 5kgPail @ 25kgDrum @ 200 kg

20

Complete ProductLineup

+62 21 – 8493-7103+62 812-3030-1552+62 821-3103-3333

Contact Us

[email protected]@[email protected]

MULTI SINERGI EKATAMA CHEMICALPesona Amsterdam Blok I-11 No 34Kota Wisata Cibubur, Bogor 16968

Documents

Product Catalogue Maintenance dan WWTP