Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
Product catalogue
Access Panels
2
FF Systembau - ContactFF Systembau - Contact
Contact
Contact
Headquarter
FF Systembau GmbHHauptstraße 3594439 Rossbach-MünchsdorfTel.: +49 (0) 8723 / 97 818 0Fax: +49 (0) 8723 / 97 818 70E-Mail: [email protected]
GERMANY/AUSTRIA/SWITZERLAND/BENELUX/SCANDINAVIA/ESTONIA FF Systembau magyarországi
MárkaképviseletH-1185 Budapest, Üllői Út 626.Tel.: +36 (0) 1 / 439 12 51, 439 12 52Fax: +36 (0) 1 / 387 500 05E-Mail: [email protected]
HUNGARY
FF Systems Sp. z o.o.Ul. Zubrzyckiego 2c26-600 RadomTel.: +48 (0) 48 / 366 42 25Faks: +48 (0) 48 / 366 42 26E-Mail: [email protected]
POLAND
FF Systembau s.r.o.Lesná 945966 01 Hliník nad HronomTel.: +421 (0) 45 / 67 27 330Fax: +421 (0) 45 / 67 27 334E-Mail: [email protected]
CZECH REPUBLIC/SLOVAKIA
FF SYSTEMBAUCOMPANY S.R.L.Str. Avram Iancu, nr. 25Nădlac, jud. Arad315 500Tel: +40 (0) 257 / 473 409Fax: +40 (0) 257 / 473 409E [email protected]:www.ffsystembau.ro
ROMANIA
ФФ СИСТЕМБАУ ООДгр.София 1421, кв.Лозенецул.”Деница” № 4тел./факс: 0 2 / 866 23 04+359 ( )E [email protected]:www.ffsystembau.bg
BULGARIA
FF SystembauHauptstrasse 3594439 Rossbach-MünchsdorfTél.: +49 (0) 8723 / 97 818 65Fax: +49 (0) 8723 / 97 818 85E-Mail: [email protected]
FRANCE
FF Systems srlvia Ca Bianca 36/521052 Busto Arsizio (VA)Tel.: +39 0 331 / 18 520 02Fax: +39 0 331 / 18 520 03E-Mail: [email protected]
ITALY/SPAIN
FF SystembauAccess Panels
FF Systembau - ContactFF Systembau - ContactC
ontactC
ontact
BULGARIAФФ СИСТЕМБАУ ООД
ITALY/SPAINFF Systems S.r.l.
FRANCEFF SYSTEMBAU
GERMANY HeadquarterFF Systembau GmbH
CZECH REPUBLIC/SLOWAKIA
FF Systembau s.r.o.
POLANDFF Systems Sp. z o.o.
HUNGARYFF Systembau magyarországi
ROMANIAFF SYSTEMBAU COMPANY S.R.L.
3
4
FF Systembau - the companyFF Systembau - the company
The ccmpany
The company
Modern and experienced companyFF Systembau is one of the leading producers ofaccess panels. Founded in 1991 the company'sexperience in the construction industry has greatlyexpanded its product lines to supply the market. In2003 it has specialized in the manufacturing of accesspanels and doors.
Further companies have been established in Central,Eastern Europe and in the United States. With theheadquarters located in Münchsdorf Germany ourproduction and administration offices are also locatedon our 5.000 m² site.
The highest technical reliability of our products, aswell as the highly qualified employees, guarantee thesustainable success of FF Systembau. At present,the company employs more than 150 members ofstaff.
Quality – consistent company policyThe highest product quality and absolute reliability of ourproducts guarantee total confidence to the customer wheninstalling our access panels. Therefore, FF Systembau hasbecome a byword for quality management, and we strive tomaintain a consistent company policy at all our subsidiaries.Every member of our staff loyally adheres to this policy, fromthe moment our raw materials are processed, to the deliveryof the finished product. Furthermore, our dedicated andhelpful advisors will give you all the advice and practicalsupport you require.
Our ambitionIt is our aim to reach the highest degree of customersatisfaction through variety and efficiency.
Versatile and innovative product rangeOur unique range of products offers access panels in thewidest selection of designs. Whether for ceilings or walls, thesolid aluminium access panels, with or without plasterboardinlay, or the long-established sheet steel access panels, canbe assembled flush.
Our products are readily installable without any difficulties.The access panels are available in many standarddimensions. Additionally, customized sizes can bemanufactured to every requested dimension. This alsoapplies to our fire resistant access panels. Different modelsare available, depending on purpose, and class of fireresistance required.
The product range is completed by access doors, which areproduced in accordance with the customer's specifications.
5
Access panels without fire resistanceAccess panels without fire resistanceW
ithout fireresistanceW
ithout fireresistance
Aluminium panelnon-removableSystem F1
Page 6
Aluminium panelwith removablehatch/for tileapplicationsSystem F3
Page 11
Page 7
Aluminium panelwith removablehatchSystem F2 Alu-Magic
Aluminium panel/oversized multi-doorSystems F1/F2
Page 10
Aluminium panelnon-removable/Jumbo doorSystem T
Page 12
Access panel aluround removableSystem R
Page 13
Aluminium panel/perforatedplasterboardSystems F1/F2
Page 9
Aluminium panelwith removablehatch/airtightSystem F2 AKL
Page 8
FF SystembauAccess Panels
Ready-to-paint door leaf
DescriptionThe access panel consists of aluminium profiles, withor without plasterboard inlay GKBI from 10 mm to25 mm and two latches.
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. For sizesfrom 300 x 300 mm, the access panel is equipped witha safety-system against accidental opening. In orderto avoid accidents, this safety-system has to besecured after each opening. The access panel iseasily installed in walls and ceilings.
A joint gap of 1.5 mm is visible between outer frameand door leaf. The concealed snap locks open theaccess panel when pressure is applied to the flap onthe spring loaded latch side.
LocksThe access panel can be equipped with the following typesof locks:
6
Access panels non-removableSystem F1 - Aluminium frame, with or without plasterboard inlay, for ceilings and drywall partitions
A B
E
C
D
D
System F1 Dimensions in mm
A B C D E
200200G125 200 200 13 28 40
300300G125 300 300 13 28 40
400400G125 400 400 13 28 40
500500G125 500 500 13 28 40
600600G125 600 600 13 28 40
All standard sizes are available for cladding thicknesses from 10 mmto 25 mm. For further cladding thickness information, please do nothesitate to call us.
Standard sizes for cladding of 12.5 mm
Access panels non-removableSystem F1 - Aluminium frame, with or without plasterboard inlay, for ceilings and drywall partitions
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Solid aluminium frame� Sophisticated solution� Flush installation in ceilings and drywall partitions� Also applicable to perforated gypsum board� Superior protection from damage or loss, as the hatch is
firmly connected to the outer frame� Lateral opening is possible in wall areas� Ready-to-paint door leaf
PZ Profile cylinder lock with metal collar
Screwdriver operated cam latch
H Hex head cam latch
P Pinned hex head cam latch
FS Four-square lock with white collar
Round-cylinder lock with keyZ
SD
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
Additionally, the screwed models as well as the aluminiumframe models are available.
FF SystembauAccess Panels
Non-rem
ovableN
on-removable
Ready-to-paint door leaf
DescriptionThe access panel consists of aluminium profiles, withor without plasterboard inlay GKBI from 10 mm to25 mm and two latches.
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. For sizesfrom 300 x 300 mm, the access panel is equipped witha safety-system against accidental opening. In orderto avoid accidents, this safety-system has to besecured after each opening. The access panel iseasily installed in walls and ceilings. A joint gap of1.5 mm is visible between outer frame and door leaf,which is equipped with a circumferential joint. Theconcealed snap locks open the access panel whenpressure is applied to the flap on the spring loadedlatch side.
7
Access panel removableSystem F2 Alu-Magic-Aluminium frame, with or without plasterboard inlay, for ceilings and drywall partitions
Access panel removableSystem F2 Alu-Magic-Aluminium frame, with or without plasterboard inlay, for ceilings and drywall partitions
AK200200G125
System F2 Dimensions in mm
A B C D E
200 200 13 28 40
AK300300G125 300 300 13 28 40
AK400400G125 400 400 13 28 40
AK500500G125 500 500 13 28 40
600 600 13 28 40
Standard sizes for cladding of 12.5 mm
AK600600G125
All standard sizes are available for cladding thicknesses from 10 mm to25 mm. For other cladding thicknesses, please do not hesitate tocontact us.
A B
E
C
D
D
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Solid aluminium frame� Sophisticated solution� Flush installation in ceilings and drywall partitions� Ready-to-paint door leaf� Also applicable to perforated gypsum board
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following typesof locks:
PZ Profile cylinder lock with metal collar
Screwdriver operated cam latch
H Hex head cam latch
P Pinned hex head cam latch
FS Four-square lock with white collar
Round-cylinder lock with keyZ
SD
Additionally, the screwed models as well as the aluminiumframe models are available.
FF SystembauAccess Panels
Ready-to-paint door leaf
DescriptionThe access panel consists of aluminium profiles, withplasterboard inlay GKBI from 12.5 mm to 25 mm andtwo latches.
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. Theaccess panel is equipped with a catchwire. In order toavoid accidents, this safety-system has to be securedafter each opening.
The access panel is readily installable in walls andceilings. A joint gap of 2.5 mm is visible between outerframe and door leaf, which is equipped with aninnovative brush joint. The concealed snap locksopen the access panel when pressure is applied to theflap on the spring loaded latch side.
NEW: Smoke-proof version also available! Please
ask for it!
Access panel 'airtight and dust-proof'System F2 AKL - Aluminium frame, with plasterboard inlay, for ceilings and drywall partitions
Standard sizes for plasterboard inlay 12.5 mm
Access panel 'airtight and dust-proof'System F2 AKL - Aluminium frame, with plasterboard inlay, for ceilings and drywall partitions
AKL200200G125
System F2 Dimensions in mm
A B C D E
200 200 13 28 40
AKL300300G125 300 300 13 28 40
AKL400400G125 400 400 13 28 40
AKL500500G125 500 500 13 28 40
600 600 13 28 40AKL600600G125
8
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Also tested with locks� Sophisticated solution� Flush installation in ceilings and drywall partitions� Validated 'airtight and dust-proof':
Test report Nr. 106 34533 (ift Rosenheim)
All standard sizes are available for cladding thicknesses from 12.5 mmto 25 mm.
For other cladding thicknesses, please do not hesitate to contact us.
Tested up to 1000 x 1000 mm
A B
E
C
D
D
Airtight and
dust-proofA
irtight anddust-proof
LocksThe access panel can be equipped with the following typesof locks:
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
FF SystembauAccess Panels
9
Access panel with perforated boardSystem F1/F2 - Aluminium frame, with plasterboard
Access panel with perforated boardSystem F1/F2 - Aluminium frame, with plasterboard W
ithperforated boardW
ithperforated board
DescriptionThe access panel consists of aluminium profiles withperforated plasterboard inlay 12.5 mm or 10 mm andtwo latches.
Both outer and inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. From300 x 300 mm, the access panel is equipped with acatchwire. In order to avoid accidents, this safety-system has to be secured after each opening.
A joint gap of 0.5 mm is visible between outer frameand door leaf. The concealed snap locks open theaccess panel when pressure is applied to the flap onthe spring loaded latch side.
All common perforations can be installed.
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Solid aluminium frame� Sophisticated solution� Flush installation in ceilings with perforated board� Fits in exactly with the existing perforation pattern� No time-consuming adjustments at the building site
necessary
A B
E
C
D
D
A+B: Depending on type of perforation. It isaligned to the existing perforation withmillimetre accuracy.
C: 13 mmD: 28 mmE: 40 mm
Example with 12.5 mm perforated board
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following typesof locks:
PZ Profile cylinder lock with metal collar
Screwdriver operated cam latch
H Hex head cam latch
P Pinned hex head cam latch
FS Four-square lock with white collar
Round-cylinder lock with keyZ
SD
FF SystembauAccess Panels
10
Access panel with oversized multi-doorSystem F1/F2 oversized multi-door - Aluminium frame, with plasterboard inlay, for drywall applications
DescriptionThe access panel consists of aluminium profiles, withplasterboard inlay GKBI from 12.5 mm to 25 mm andtwo latches.
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. Theaccess panel is equipped with a safety-systemagainst accidental opening. In order to avoidaccidents, this safty-system has to be secured aftereach opening.
A joint gap of 1.5 mm is visible between outer frameand door leaf. The concealed snap locks open theaccess panel when pressure is applied to the flap onthe spring loaded latch side.
This access panel is designed with a double door tocreate a large clear span opening.
Oversized
multi-door
Oversized
multi-door
Particular advantages of our system
� Superior engineering & innovative design� Fast delivery� Quick and easy installation� Solid aluminium frame� Flush installation in ceilings and walls� Full clear opening despite oversize
Access panel with oversized multi-doorSystem F1/F2 oversized multi-door - Aluminium frame, with plasterboard inlay, for drywall applications
CapabilitiesIn non-load bearing interior plasterboard ceilings and walls.
DimensionsThese panels are customizations, produced exactly todimensions given by the customer.
LocksThe access panel can be equipped with the following typesof locks:
PZ Profile cylinder lock with metal collar
Screwdriver operated cam latch
H Hex head cam latch
P Pinned hex head cam latch
FS Four-square lock with white collar
Round-cylinder lock with keyZ
SD
FF SystembauAccess Panels
Example of installation: Consignment without tiles.
Left picture:Closed side view, with latches
DescriptionThe access panel consists of aluminium profiles, withplasterboard inlay GKBI 12.5 mm, 15 mm or 25 mmand two latches.
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. Theaccess panel is equipped with a catchwire. In order toavoid accidents, this safety-system has to be securedafter each opening.
The access panel is readily installable in walls. A jointgap of 3 mm (version 1) or 1.5 mm (version 2) is visiblebetween outer frame and door leaf, which is equippedwith a circumferential joint. The concealed snap locksopen the access panel when pressure is applied to theflap on the spring loaded latch side.
Access panel for tilingSystem F3 - Aluminium frame, with plasterboard inlay, for drywall partitions
Access panel for tilingSystem F3 - Aluminium frame, with plasterboard inlay, for drywall partitions For tiling
For tiling
11
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Solid aluminium frame� Sophisticated solution� Flush installation in drywall partitions
D = 28 mmE = 40 mm
DimensionsThe access panel is aligned to the grid dimension of the tiles.Information on the dimensions of the tiles and joint gaps is required,from which dimensionsAand B can be ascertained.
Dimensions D and E remain constant. Dimension C corresponds tothe respective cladding thicknesses.
Versions� For “tiling the door leaf”: The aluminium profile is flush with the
board GKBI. The tiles are placed upon the profile.
� For “tiling into the frame“: The aluminium profile is higherthan the board GKBI. The tiles are placed into the frame.
- easier assembly for the tilerAdvantages:- clean circumferential border
All standard sizes are available for cladding thicknesses of 12.5 mm,15 mm or 25 mm.
For other cladding thicknesses, please do not hesitate to call us.
DimensionsThese panels are customizations, produced exactly to dimensionsgiven by the customer.
Version 1: For tiling the door leaf
E
A
B
C
D
D
Version 2: For tiling into the frame
FF SystembauAccess Panels
Jumbo door
Jumbo door
Jumbo doorSystem T for oversizes
Jumbo doorSystem T for oversizes
DescriptionThis access panel consists of welded aluminiumframe and is strengthened with aluminium squaretubing. This reinforced square tubing allows for onelarge door. The door is non-removable.
The reveal of 1.5 mm is visible between the outerframe and door hatch. The concealed snap locksopen the access panel when pressure is applied to thespring loaded latch side.
This access panel is designed for larger openings thatrequire one door.
� Superior engineering & innovative design� Fast delivery� Quick and easy installation� Solid aluminium frame� Flush installation in ceilings and walls� Lateral opening
12
Particular advantages of our system
CapabilitiesJumbo doors can be installed in plasterboard walls with a thicknessfrom 12.5 to 25 mm.
DimensionsThese panels are customizations, produced exactly to dimensionsgiven by the customer.
LocksThe Jumbo door can be equipped with the following types oflocks:
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
FF SystembauAccess Panels
System R Dimensions in mm
A B
300 360
400 460
500 560
R200G125
R300G125
R400G125
R500G125
R600G125 600 660
200 260
C
Access panel round removableSystem R - round access panel with plasterboard inlay, removable R
oundAccess panel round removableSystem R - round access panel with plasterboard inlay, removable R
ound
DescriptionThe round access panel consists of an aluminiumframe with plasterboard inlay 12,5 mm and latches.
The access panel is equipped with a safety-systemagainst accidental opening. In order to avoidaccidents, this safety-system has to be secured aftereach opening. The access panel is easily installed inwalls and ceilings. A joint gap of 1.5 mm is visiblebetween outer frame and door leaf, which is equippedwith a circumferential sealing strip. The concealedsnap locks open the access panel when pressure isapplied to the flap on the spring loaded latch side.
Standard sizes for plasterboard inlay 12.5 mm
All standard sizes are available for cladding thickness 12.5 mm.
Particular advantages of our system
� Economical solution� Fast delivery� Quick and easy installation� Solid aluminium frame� Superior engineering & innovative design� Flush installation in drywall ceilings and walls� Also applicable to perforated gypsum boards
perforated board
Cladding thicknesses 15 mm, 18 mm and 20 mm are alsoavailable (special fabrication)!
13
LocksThe access panel can be equipped with the following types oflocks:
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
FF SystembauAccess Panels
Access panels fire resistanceAccess panels fire resistance
Fire resistanceFire resistance
Access panel fireresistanceEI30/EI60/EI90/EI120for drywall partitionsSystem F4EI30/EI60/EI90/EI120
Page 15
Access panelfire resistanceEI30for shaft wallsSystem F5 - 30
Page 16
Access panelfire resistanceEI90for shaft wallsSystem F5 - 90
Page 18
Access panelfire resistanceEI30for ceilingsSystem F6 - 30
Page 20
Access panelfire resistanceEI90for ceilingsSystem F6 - 90
Page 22
Access panelfire resistanceEI60for shaft wallsSystem F5 - 60
Page 17
Access panelfire resistanceEI120for shaft wallsSystem F5 - 120
Page 19
Access panelfire resistanceEI60for ceilingsSystem F6 - 60
Page 21
Access panelfire resistanceEI120for ceilingsSystem F6 - 120
Page 23
Access PanelsFF Systembau
14
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
D = 28 mmE = 40 mm
DescriptionThe access panel consists of aluminium profiles, withplasterboard inlay GKF 12.5 mm (EI30) or 25 mm(EI120/EI90/EI60/EI30) and two latches.
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. Theaccess panel is equipped with two catchwires. Inorder to avoid accidents, this safety-system has to besecured after each opening.
A joint gap of 1.5 mm is visible between outer frameand door leaf, which is equipped with a circumferentialfire-resistant seal (foaming). The concealed snaplocks open the access panel when pressure is appliedto the flap on the spring loaded latch side.
CapabilitiesIn non-load bearing, room-enclosing stud walls of the fireresistance class:
� EI30 with double layer cladding 12.5 mm� EI30/EI60/EI90/EI120 with double layer cladding 2 x 12.5 mm
Tested in accordance with the "European Norms EN 1364-1,EN 1634-1 and EN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes. DimensionsAand B as follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm� 600 x 600 mm� tested up to 1000 x 1000 mm
Dimensions D and E remain constant. Dimension C corresponds tothe respective cladding thicknesses.
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following typesof locks:
Access panel fire resistance EI30/EI60/EI90/EI120For drywall partitionsSystem F4 -
Access panel fire resistance EI30/EI60/EI90/EI120System F4 - For drywall partitions
15
� Economical solution� Delivery at short notice on request� Quick and easy installation� Solid aluminium frame� Sophisticated solution� Flush installation in drywall partitions
Left picture:side viewclosed,with latches
E
All dimensions are available for cladding thicknesses of 12.5 mm(EI30) and 25 mm (EI60/EI90/EI120). EI60/EI90/EI120 is alsoapplicable to EI30-partitions with cladding of 2 x 12.5 mm.
C
D
D
A
B
Fire resistanceFire resistance
Removable hatch
Particular advantages of our system
FF SystembauAccess Panels
DescriptionThe access panel consists of aluminium profiles withplasterboard inlay GKF 25 mm (EI30).
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. Theaccess panel is equipped with two catchwires. Inorder to avoid accidents, this safety-system has to besecured after each opening.
A joint gap of 1.5 mm is visible between outer frameand door leaf, which is equipped with a circumferentialfire-resistant seal (foaming). The concealed snaplocks open the access panel when pressure is appliedto the flap on the spring loaded latch side.
Access panel fire resistanceSystem F5 - 30 - For shaft walls
EI30EI30
CapabilitiesIn non-load bearing shaft walls of the fire resistance class EI30with single-side cladding 25 mm.
Tested in accordance with the "European Norms EN 1634-1 andEN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes. DimensionsAand B as follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm� 600 x 600 mm� tested up to 800 x 800 mm
Dimension D remains constant. Dimension C corresponds to thecladding thickness.
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following typesof locks:
16
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Flush installation in shaft walls� Also suitable for tiling� Installation possible in shaft walls of different producers
D = 55 mm
Access panel fire resistanceSystem F5 - 30 - For shaft walls
Example EI30with 25 mm GKF
D
D
C
B
A
Fire resistanceFire resistance
Removable hatch
FF SystembauAccess Panels
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
DescriptionThe access panel consists of aluminium profiles withplasterboard inlay GKF 30 mm (EI60).
Both outer and inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. Theaccess panel is equipped with two catchwires. Inorder to avoid accidents, this safety-system has to besecured after each opening.
A joint gap of .5 mm is visible between outer frame2and door leaf, which is equipped with a circumferentialfire-resistant seal . The concealed snap(foaming)locks open the access panel when pressure is appliedto the flap on the spring loaded latch side.
Access panel fire resistanceFor shaft wallsSystem F5 - 60 -
Access panel fire resistanceSystem F5 - 60 - For shaft walls
17
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Flush installation in shaft walls/insulation panel� Also suitable for tiling� Installation possible in shaft walls of different producers
EI60EI60
CapabilitiesIn non-bearing shaft walls/insulation panels of the fire resistanceclass EI60 with single-side cladding 30 mm.
Tested in accordance with the "European Norms EN 1634-1 andEN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm� 600 x 600 mm� tested up to 800 x 800 mm
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following types
locksof :
D = 55 mm
Example EI60with 30 mm GKF
D
D
CB
A
Fire resistanceFire resistance
FF SystembauAccess Panels
Removable hatch
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
DescriptionThe access panel consists of aluminium profiles withplasterboard inlay GKF 40 mm, 45 mm or 50 mm(EI90).
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. The fire-resistant double-layer cladding on the reverse sidemeets the required fire resistance standard. Theaccess panel is equipped with two catchwires. Inorder to avoid accidents, this safety-system has to besecured after each opening.
A joint gap of 1.5 mm is visible between outer frameand door leaf, which is equipped with a circumferentialfire-resistant seal (foaming). The concealed snaplocks open the access panel when pressure is appliedto the flap on the spring loaded latch side.
CapabilitiesIn non-bearing shaft walls of the fire resistance class EI90:
� with single-side cladding 40 mm� with single-side cladding 45 mm� with single-side cladding 50 mm
Tested in accordance with the "European Norms EN 1634-1 andEN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes. DimensionsAand B as follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm
The clearance is smaller by 50 mm each.
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following typesof locks:
� 500 x 500 mm� 600 x 600 mm� tested up to H: 1500 x B: 1000 mm
Access panel fire resistanceSystem F5 - 90 - For shaft wallsAccess panel fire resistanceSystem F5 - 90 - For shaft walls
EI90EI90
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Flush installation in shaft walls� Also suitable for tiling� Installation possible in shaft walls of different producers
Dimension D remains constant.Dimension E varies according to GKF-thickness.Dimension C corresponds to the respective cladding thicknesses.
Example EI90 with 40 mm GKF
D = 55 mmE = variable dimensions:EI90 with 40 4mm GKF = 0 mmEI with 45 390 mm GKF = 5 mmEI with 3090 50 mm GKF = mmZ = total thickness = 80 mm
C
D
D
E
Z
A
B
Fire resistanceFire resistance
Removable hatch
18
FF SystembauAccess Panels
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
Access panel fire resistanceFor shaft wallsSystem F5 - 120 -
CapabilitiesIn non-bearing shaft walls/insulation panels of the fire resistanceclass EI120:
� with single-side cladding 40 mm� with single-side cladding 45 mm� with single-side cladding mm50
Tested in accordance with the "European Norms EN 1634-1 andEN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes. DimensionsAand B as follows
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following types
lockof s:
� 500 x 500 mm� 600 x 600 mm� tested up to H: 1500 x B: 1000 mm
19
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Flush installation in shaft walls/insulation panel� Also suitable for tiling� Installation possible in shaft walls of different producers
Removable hatch
Dimension D remains constant.Dimension E varies according to GKF-thickness.Dimension C corresponds to the respective cladding thicknesses.
Example EI120 with 40 mm GKF
D = 55 mmE = :variable dimensionsEI120 with 40 4mm GKF = 0 mmEI120 with 45 3mm GKF = 5 mmEI120 with 3050 mm GKF = mm
C
D
D
E
A
B
DescriptionThe access panel consists of aluminium profiles withplasterboard inlay GKF 40 mm, 45 mm or 50 mm(EI120).
Both outer and inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. The fire-resistant double-layer on the reverse side meets therequired fire resistance class. The access panel isequipped with two catchwires.
A joint gap of 1.5 mm is visible between outer frameand door leaf, which is equipped with a circumferentialfire-resistant seal . The concealed snap(foaming)locks open the access panel when pressure is appliedto the flap on the spring loaded latch side.
Access panel fire resistanceSystem F5 For shaft walls- 120 -
EI120EI120Fire resistanceFire resistance
FF SystembauAccess Panels
FS Four-square lock with white collar
Access panel fire resistanceSystem F6 - 30 - For ceilings
EI30EI30
CapabilitiesIn non-load bearing ceilings of the fire resistance class:
� EI30 with cladding of 12.5 mm, 15 mm, 18 mm, 20 mm or25 mm
Tested in accordance with the "European Norms EN 1364-2 andEN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes. DimensionsAand B as follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm� 600 x 600 mm� tested up to 800 x 800 mm
Dimensions D and E remain constant. Dimension C corresponds tothe respective cladding thicknesses.
20
WITHOUT FIRE-RESISTANT LAYERON THE REVERSE SIDE!
Access panel fire resistanceSystem F6 - 30 - For ceilings
D = 28 mmE = 40 mm
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Flush installation in ceilings
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following typesof locks:
All dimensions are available for cladding thicknesses of12.5 mm, 15 mm, 18 mm, 20 mm or 25 mm (EI30).
DescriptionThe access panel consists of aluminium profiles withplasterboard inlay GKF 12.5 mm, 15 mm, 18 mm,20 mm or 25 mm (EI30).
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. Theaccess panel is equipped with two catchwires. Inorder to avoid accidents, this safety-system has to besecured after each opening.
A joint gap of 1.5 mm is visible between outer frameand door leaf, which is equipped with a circumferentialfire-resistant seal (foaming). The concealed snaplocks open the access panel when pressure is appliedto the flap on the spring loaded latch side.
Example EI30with 25 mm GKF
A B
D
D C
E
Fire resistanceFire resistance
Removable hatch
FF SystembauAccess Panels
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
DescriptionThe access panel consists of aluminium profiles withplasterboard inlay 0 mm (2 x 15 mm).Fireboard 3
Both outer and inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process.
The access panel is equipped with a catchwire. Inorder to avoid accidents, this safety-system has to besecured after each opening.
A joint gap of 2.5 mm is visible between outer frameand door leaf, which is equipped with a circumferentialfire-resistant seal . The concealed snap(foaming)locks open the access panel when pressure is appliedto the flap on the spring loaded latch side.
Access panel fire resistanceSystem F6 For- 60 - ceilingsAccess panel fire resistanceSystem F6 - 60 - F sor ceiling
21
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Flush installation in plasterboard ceilings� Fire-resistant layer on the reverse side is no longer
necessary
EI60EI60
CapabilitiesIn non-bearing plasterboard ceilings of the fire resistance
.class EI60
Tested in accordance with the "European Norms EN 1364-2 andEN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes. DimensionsAand B as follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm� 600 x 600 mm� tested up to 800 x 800 mm
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following types
locksof :
Example EI60 with 30 mm Fireboard
Fire resistanceFire resistance
FF SystembauAccess Panels
A B
D
D C
Removable hatch
C = 30 mmD = 25 mm
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
DescriptionThe access panel consists of aluminium profiles withplasterboard inlay GKF 40 mm, 43 mm, 45 mm or50 mm.
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process.
The fire-resistant double-layer cladding on thereverse side meets the required fire resistancestandard. The access panel is equipped with twocatchwires. In order to avoid accidents, this safety-system has to be secured after each opening. A jointgap of 1.5 mm is visible between outer frame and doorleaf, which is equipped with a circumferential fire-resistant seal (foaming). The concealed snap locksopen the access panel when pressure is applied to theflap on the spring loaded latch side.
CapabilitiesIn non-load bearing ceilings of the fire resistance class:
� EI90 with cladding of 40 mm� EI90 with cladding of 43 mm� EI90 with cladding of 45 mm� EI90 with cladding of 50 mm
Tested in accordance with the "European Norms EN 1364-2 andEN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes. DimensionsAand B as follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm
Dimension D remains constant. Dimension E varies according toGKF-thickness. Dimension C corresponds to the respectivecladding thicknesses.
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following typesof locks:
Access panel fire resistanceSystem F6 - 90 - For ceilings
Access panel fire resistanceSystem F6 - 90 - For ceilings
EI90EI90
C = 40 - 50 mmD = 90 mmE = variable dimensionZ = total height = 110 mm
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Flush installation in ceilings
ExampleEI90 with40 mm GKF
Z� 500 x 500 mm� 600 x 600 mm� Tested up to 800 x 800 mm
A
D
DC
E
BFire resistanceFire resistance
22
Removable hatch
FF SystembauAccess PanelsPZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
DescriptionThe access panel consists of aluminium profiles withplasterboard inlay 50 mm.Fireboard
Both outer and inner frame of the access panel consistof four single frames, which are firmly connected dueto a special welding process. The fire-resistantdouble-layer on the reverse side meets the requiredfire resistance class. The access panel is equippedwith two catchwires.
In order to avoid accidents, this safety-system has tobe secured after each opening.
A joint gap of .5 mm is visible between outer frame2and door leaf, which is equipped with a circumferentialfire-resistant seal . The concealed snap(foaming)locks open the access panel when pressure is appliedto the flap on the spring loaded latch side.
CapabilitiesIn non-bearing plasterboard ceilings of the fire resistance
.class EI120
Tested in accordance with the "European Norms EN 1364-2 andEN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes. DimensionsAand B as follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm
Dimensions D and E remain constant. Dimension C corresponds tothe respective cladding thicknesses.
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following types
lockof s:
23
Access panel fire resistanceSystem F6 - 120 - For ceilingsAccess panel fire resistanceSystem F6 - 120 - For ceilings
EI120EI120
� 500 x 500 mm� 600 x 600 mm� tested up to 800 x 800 mm
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Flush installation in plasterboard ceilings
C = 50 mmD = 110 mmE = 45 mmZ = total thickness = 120 mm
ExampleEI120 with50 mm Fireboard
ZA
D
DC
E
B
Fire resistanceFire resistance
FF SystembauAccess Panels
Removable hatch
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
24
Access panels for solid wallsAccess panels for solid walls
Solid w
allsS
olid walls
Access panelfor solid walls andceilings withoutfire resistanceSystem MW
Page 25
Access panelfire resistanceEI30for solid wallsSystem F5 - 30
Page 26
Page 28
Access panelfire resistanceEI90/EI120for solid wallsSystem F5 - 90/120
FF SystembauAccess Panels
Access panelfire resistanceEI60for solid wallsSystem F5 - 60
Page 27
25
A
B
C
Access panel for solid walls and ceilingsAluminium frame, with or without drywall inlay, for solid walls and ceilingsSystem MW -
Access panel for solid walls and ceilingsSystem MW - Aluminium frame, with or without drywall inlay, for solid walls and ceilings For solid w
allsand ceilingsFor solid w
allsand ceilings
DescriptionThe access panel consists of a welded aluminiumframe and is available with or without drywall inlay of12.5 mm,15 mm or 25 mm and two latches.
Both an outer and an inner frame assembly consistsof high grade aluminium which is bonded with aspecial welding process. For sizes 300 x 300 mm andup the access panels are equipped with a safetysystem to prevent accidental opening. This safetysystem must be reattached if the hatch is removed.
The reveal of 1.5 mm is visible between the outerframe and door hatch. The concealed snap locksopen the access panel when pressure is applied tothe spring loaded latch side.
This access panel is designed to be recessed intoconcrete wall and ceiling systems. This panel comeswith predrilled holes for easy installation.
� Superior engineering & innovative design� Fast delivery� Quick and easy installation� Solid aluminium frame� Flush installation� Also available for on-site plaster or tile application
Particular advantages of our system
CapabilitiesSolid walls and ceilings
DimensionsThese panels are customizations, produced exactly to dimensionsgiven by the customer.
LocksThe access panel can be equipped with the following types oflocks:
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
C = 50 - 70 mm
FF SystembauAccess Panels
26
Access panel fire resistanceSystem F5 - 30 - For solid walls
Access panel fire resistanceSystem F5 - 30 - For solid wallsFire resistanceFire resistance
DescriptionThe access panel consists of aluminium profiles withplasterboard inlay GKF mm (E ).25 I30
Both outer and inner frame of the access panel, an anconsist of four single frames, which are firmlyconnected due to a special welding process. Theaccess panel is equipped with two catchwires. Inorder to avoid accidents, this safety-system has to besecured after each opening.
A joint gap of .5 mm is visible between outer frame1and door leaf, which is equipped with a circumferentialfire-resistant seal . The concealed snap(foaming)locks open the access panel when pressure is appliedto the flap on the spring loaded latch side.
Using the enclosed masonry straps, the access panelcan be fixed easily into solid walls.
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� solid wallsFlush installation in� or plasteringAlso suitable for tiling
D = 57 mm
Example EI30with 25 mm GKF
CapabilitiesIn walls the fire resistance class EI 0solid with 3 :
� for all suitable solid wall constructions
Tested in accordance with the "European Norms EN 1634-1 andEN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes :. DimensionsAand B as follows
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm� 600 x 600 mm� tested up to 800 x 800 mm
Dimension D remains constant. Dimension C corresponds to thecladding thickness.
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following types
locksof :
EI30EI30
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
FF SystembauAccess Panels
Removable hatch
D
D
CB
A
DescriptionThe access panel consists of aluminium profiles withplasterboard inlay GKF 30 mm (EI60).
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. Theaccess panel is equipped with two catchwires. Inorder to avoid accidents, this safety-system has to besecured after each opening.
A joint gap of 2.5 mm is visible between outer frameand door leaf, which is equipped with a circumferentialfire-resistant seal (foaming). The concealed snaplocks open the access panel when pressure is appliedto the flap on the spring loaded latch side.
Using the enclosed masonry straps, the access panelcan be fixed easily into solid walls.
CapabilitiesIn solid walls with the fire resistance class Ei60:
� for all suitable solid wall constructions
Tested in accordance with the "European Norms EN 1634-1 andEN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes. DimensionsAand B as follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following types oflocks:
� 500 x 500 mm� 600 x 600 mm� tested up to 800 x 800 mm
Access panel fire resistanceSyxtem F5 - 60 - For solid wallsAccess panel fire resistanceSystem F5 - 60 - For solid walls
EI60EI60
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Flush installation in solid walls� Also suitable for tiling and plastering
Fire resistanceFire resistance
27
D = 57 mm
Example EI60with 30 mm GKF
D
D
CB
A
Removable hatch
FF SystembauAccess Panels
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
28
Access panel fire resistanceSystem F5 - 90/120 - For solid walls
Access panel fire resistanceSystem F5 - 90/120 - For solid wallsFire resistanceFire resistance
DescriptionThe access panel consists of aluminium profiles withplasterboard inlay GKF 40 mm ( 90)EI .
Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. The fire-resistant double-layer cladding on the reverse sidemeets the required fire resistance standard. Theaccess panel is equipped with two catchwires. Inorder to avoid accidents, this safety-system has to besecured after each opening.
A joint gap of 1.5 mm is visible between outer frameand door leaf, which is equipped with a circumferentialfire-resistant seal . The concealed snap(foaming)locks open the access panel when pressure is appliedto the flap on the spring loaded latch side.
Using the enclosed masonry straps, the access panelcan be fixed easily into solid walls.
CapabilitiesIn solid walls with the fire resistance class EI90/EI120:
� for all suitable solid wall constructions
Tested in accordance with the "European Norms EN 1634-1 andEN 1634-3".
DimensionsThe access panel fire resistance is available in the followingstandard sizes. DimensionsAand B as follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm� 600 x 600 mm� tested up to H: 1500 x B: 1000 mm
The clearance is smaller by 50 mm each.
LocksThe access panel can be equipped with the following types
lock :of s
EI90:
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Flush installation in solid walls� Also suitable for tiling or plastering
C = 40 mmD = 57 mmE = 40 mmZ = total thickness = 80 mm
Removable hatch
EI90/EI120EI90/EI120
EI120:
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
PZ Profile cylinder lock with metal collar
FS Four-square lock with white collar
Round-cylinder lock with keyZ
FS Four-square lock with white collar FF SystembauAccess Panels
C
D
D
E
Z
A
B
29
Access panels for exterior/facadeAccess panels for exterior/facade
Access panel forfacade watertightfor plasteringSystem MPWD
page 30
Access panel forexterior watertightSystem EXT
page 31
Exterior/facadeExterior/facade
FF SystembauAccess Panels
DescriptionThe access panel consists of aluminium profiles, acement board and a round cylinder lock with key.Both, an outer and an inner frame of the access panelconsist of four single frames, which are firmlyconnected due to a special welding process. Theaccess panel is equipped with a safety-systemagainst accidental opening.In order to avoid accidents, this safety-system has tobe secured after each opening. A joint gap of 3 mm isvisible between outer frame and door leaf, which isequipped with an innovative brush joint and, inaddition, with a special joint. Access panels forfacades in the outer area are applicable for directmounting onto solid walls (without external wallinsulation system) or for installation into a wallinsulation system (foam-sealed) from an insulationthickness of 80 mm.
MPWD200200
System MPWD Dimensions in mm
A B C
200 200 78
MPWD300300 300 300 78
MPWD400400 400 400 78
MPWD500500 500 500 78
600 600 78
Standard sizes
MPWD600600
All standard sizes are available at short notice from stock.
Particular advantages of our system
� Economical solution� Fast delivery� Quick and easy installation� Solid aluminium frame� Superior engineering & innovative design� Flush installation in facade walls
Access panel for facade “watertight“System MPWD - for plasteringFor facade
A
B
C
Access panel for facade “watertight“System MPWD - for plastering
The access panel is "watertight".
30
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following types oflocks:
Z Round-cylinder lock with key (standard)
SD1 Screwdriver operated cam latch
H1 Hex Head Cam Latch
P1 Pinned Hex Head Cam Latch
For facade
FF SystembauAccess Panels
Access panel for exterior "watertight"System EXT - with metal surface Exterior
Exterior
B
A
DescriptionThe access panel EXT consists of a solid aluminiumframe and a hatch made of 1 mm aluminium sheetwith integrated insulation.
A safe installation in all types of walls is enssured byfixation through the predrilled holes in the sides of theouter frame.
The outer frame is equipped with a specialcircumferential sealing strip for a "watertight" joint. Aninnovative brush joint fixed at the door leaf serves asprotection against dust.
CapabilitiesThe access panel EXT can be installed in each typeof solid walls and walls with exterior insulationfinishing systems.
The access panel was specially developed forexterior application.
Particular advantages of our system
� Economical solution� Fast delivery� Quick and easy installation� Superior engineering & innovative design� All-purpose� Lockable
Standard sizesThe access panel EXT is available in the following standardsizes:
System EXT Dimensions in mm
A B
300 300
400 400
500 500
EXT200200AL
EXT300300AL
EXT400400AL
EXT500500AL
EXT600600AL 600 600
200 200
Access panel for exterior "watertight"
All standard sizes are available at short notice from stock.
The access panel is "watertight".
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
LocksThe access panel can be equipped with the following types oflocks:
FS Four square lock
Z Round-cylinder lock with key
31
System EXT - with metal surface
FF SystembauAccess Panels
32
The locks listed below can be mounted in our access panels and -doors:
FS FS
FS Four-square lock with white collar
SN Snap lock
SN SN
H Hex head cam latch
H1 H2
Z Round-cylinder lock with key
Z Z
P Pinned hex head cam latch
P1 P2
PZ Profile cylinder lock with metal collar
PZ1 PZ2
withoutprofile cylinder
includingprofile cylinder
SD Screwdriver operated cam latch
SD2SD1
Access panels sheet steelAccess panels sheet steelS
heet steelS
heet steel
Access panelsheet steel withfour-square lockSystem B1
Page 34
33
Access panelsheet steel withcylinder lockSystem B3
Page 36
FF SystembauAccess Panels
Access panelsheet steel
airtight and dust-proof with four-square lockSystem B1
Page 34
Access panelsheet steel
airtight and dust-proof with cylinderlockSystem B3
Page 36
Stainless steel Stainless steelDouble-doors
Access panelsheet steel withsnap lockSystem B2
Page 35
Access panelsheet steel withprofile cylinderSystem B4
Page 37
Access panelsheet steel withmagnetic lockSystem B5
Page 38
DescriptionThe access panel consists of a solid outer frame and ahatch, made of galvanized sheet steel with integratedfour-square lock. The standard colour is white -RAL9016.
The profile of the outer frame is chamfered. Therefore,the hatch is fixed flush with surfaces made of plasteror gypsum. The four riveted wall anchors ensure asafe installation in walls or ceilings. The door leaf isremovable and suitable for left-hinged or right-hingeddoors.
CapabilitiesSheet steel access panels can be mounted inpartitions and ceilings as well as in solid walls andceilings.
34
Access panel sheet steelWith four-square lockSystem B1 -
Access panel sheet steelSystem B1 - With four-square lockS
heet steelS
heet steel
FF SystembauAccess Panels
Stainless steelDouble-doors
DimensionsThe access panel sheet steel with four-square lock is available inthe following standard sizes. DimensionAas follows:
� 150 x 150 mm� 150 x 200 mm� 200 x 200 mm� 200 x 250 mm� 200 x 300 mm
(these are wallopening dimensions)
B A
C
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
Furthermore, sheet steel access panels are available in many otherversions, e.g. galvanized, different-coloured etc.
Please do not hesitate to contact us.
Tested up to 600 x 600 mm
� 250 x 250 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm
� 600 x 400 mm� 600 x 600 mm� 600 x 800 mm� 800 x 800 mm
A = wall opening dimensionB = dimension A+35 mmC = 25 mm
Particular advantages of our system
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Available in nearly every colour
35
DescriptionThe access panel consists of a solid outer frame and ahatch, made of galvanized sheet steel. The concealedsnap locks open the access panel when pressure isapplied to the flap on the spring loaded latch side. Thestandard colour is white - RAL9016.
The profile of the outer frame is chamfered. Therefore,the hatch is fixed flush with surfaces made of plasteror gypsum. The four riveted wall anchors ensure asafe installation in walls or ceilings. The door leaf isremovable and suitable for left-hinged and right-hinged doors.
CapabilitiesSheet steel access panels can be installed in partitions and ceilingsas well as in solid walls and ceilings.
DimensionsThe access panel sheet steel with snap lock is available in thefollowing standard sizes. DimensionAas follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm� 600 x 600 mm
(these are wall opening dimensions)
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
Furthermore, sheet steel access panels are available in many otherversions, e.g. galvanized, different-coloured etc.
Please do not hesitate to call us.
A = wall opening dimensionB = dimension A+35 mmC = 25 mm
Access panel sheet steelWith snap locksSystem B2 -
Access panel sheet steelSystem B2 - With snap locks S
heet steelS
heet steel
Particular advantages of our system
� Economical solution� Delivery at short notice is possible� Quick and easy installation� Sophisticated solution� Available in nearly every colour
FF SystembauAccess Panels
B A
C
Stainless steel
Access panel sheet steelSystem B3 - With cylinder lock
Access panel sheet steelSystem B3 - With cylinder lockS
heet steelS
heet steel
DescriptionThe access panel consists of a solid outer frame and ahatch, made of galvanized sheet steel. The panel iswhite powder coated and comes with keyoperatedcylinder lock.
The access panel rounded-off profile ensures asmooth transition to almost any surface. The fourriveted wall anchors ensure a safe installation in wallsor ceilings. The door is removable and suitable for left-hand or right-hand opening.
CapabilitiesSheet steel access panels can be mounted inpartitions and ceilings as well as in solid walls andceilings.
36
FF SystembauAccess Panels
DimensionsThe access panel sheet steel with cylinder lock is available in thefollowing standard sizes. DimensionAas follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm� 600 x 600 mm
(these are wallopening dimensions)
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
Furthermore, sheet steel access panels are available in many otherversions, e.g. galvanized, different-coloured etc.
Please do not hesitate to contact us.
Tested up to 600 x 600 mm
A = wall opening dimensionB = dimension A+35 mmC = 25 mm
B A
C
Particular advantages of our system
� Fast delivery� Economical solution� Quick and easy installation� Superior engineering and innovative design� Available in nearly every colour� Lockable
Stainless steel
37
DescriptionThe access panel consists of a solid outer frame and ahatch, made of galvanized sheet steel with integratedprofile cylinder lock. The standard colour is white -RAL9016.
The profile of the outer frame is chamfered. Therefore,the hatch is fixed flush with surfaces made of plasteror gypsum. The four riveted wall anchors ensure asafe installation in walls or ceilings. The door leaf isremovable and suitable for left-hinged and right-hinged doors.
The access panel a profile cylindercan be locked withlock (profile cylinder provided by customer).
CapabilitiesSheet steel access panels can be installed in partitions and ceilingsas well as in solid walls and ceilings.
DimensionsThe access panel sheet steel with profile cylinder is available in thefollowing standard sizes. Dimension Aas follows:
� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm� 600 x 600 mm
(these are wall opening dimensions)
Customized solutionsCust mized sizes can be produced in every dimension uponoenquiry.
Furthermore, sheet steel access panels are available in many otherversions, e.g. galvanized or from stainless, different-coloured madesteel.
Please do not hesitate to call us.
Access panel sheet steelWith profile cylinder lock – prepared for profile cylinder provided by customer!System B4 - S
heet steelS
heet steel
� Economical solution� Delivery at short notice on request� Quick and easy installation� Sophisticated solution� Available in nearly every colour� Lockable� Perfectly suitable for on site locking systems
Access panel sheet steelSystem B4 - With profile cylinder lock – prepared for profile cylinder provided by customer!
A = B = dimension A+35 mm C = 25 mmwall opening dimension
FF SystembauAccess Panels
Particular advantages of our system
B A
C
Stainless steel
38
Sheet steel
Sheet steel
Access panel sheet steelSystem B5 - with magnetic lock
Access panel sheet steelSystem B5 - with magnetic lock
DescriptionThe access panel consists of a solid outer frame andhatch, made of galvanized sheet steel or stainlesssteel with integrated magnetic lock. The standardcolour is white RAL9016.
Asmooth transition to almost any surface is formed bythe rounded-off profile. Four riveted wall anchorsensure a safe installation in walls or ceilings. The dooris removable and suitable for left-hand or right-handopening.
The access panel is provided with a magnetic lockand a recessed grip.
CapabilitiesSheet steel access panels can be mounted in walls orceilings.
A= wall opening dimensionB = dimension A + 35 mmC = 25 mm
Particular advantages of our system
� Economical solution� Fast delivery� Quick and easy installation� Superior engineering and innovative design� Available in nearly every colour
DimensionsThe access panel sheet steel with magnetic lock is available in thefollowing standard sizes. DimensionAas follows:
� 150 x 150 mm� 200 x 200 mm� 300 x 300 mm� 400 x 400 mm� 500 x 500 mm� 600 x 600 mm
(these are wall opening dimensions)
B A
C
Customized solutionsCustomized sizes can be produced in every dimension uponenquiry.
Furthermore, sheet steel access panels are available in many otherversions as galvanized or from stainless steel. A double-doorversion is also available.
Please do not hesitate to contact us!
FF SystembauAccess Panels
Copyright by FF Systembau GmbH
Design:Kängoo Mediendesign, www.kaengoo.com
Cover:ACG
Subject to changeWe do not accept liability for printing errors and mistakes
Access Panels
3rd
editio
n