Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
PRODUCTC A T A L O G
1033 Bryn Mawr AveBensenville, Illinois 60106-1244
phone: 630-766-5500fax: 630.766.5631
www.sackettsystems.com
Effective:September 1, 2019
OUR COMPETITION SAYS WE’RE OVER-ENGINEERED.
WE AGREE.BECAUSE YOUR BUSINESS DEPENDS ON IT.
For more than 120 years we’ve been building
material handling equipment the way it should
be built-to last. And that’s why there are Sackett
battery exchange systems around the world that are
20+ years old that keep operations up and business
moving.
We get the job done right with the highest quality
materials and expert craftmanship so you can get
the job done right with consistent uptimes, longer
life cycles, increased productivity, a safer workplace,
and lowest cost of ownership. Are we over-
engineered? Yes, because your business depends
on it!
And we back up the industry’s best-built systems
with the best-built warranty.
Determine which Sackett battery exchange solution is right for your operation.BATTERY EXCHANGE SOLUTION GUIDE
Number of batteries in storage
5 or fewer
5 to 20
20 to 100+
Number of changes per day
5 to 10
10 to 20
20 or more
Battery exchange solution
Manual Transfer Cart
X-Changer or Powered Transfer Cart
Hydra-Handlers
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 1
Table of ContentsAbout Us Page 1
Table of Contents Page 2
Side Removal Battery Stands Page 3
Charger Mounting & Cable Retractors Page 4
Drip Pan Kits Page 5
Side Removal, Powered Travel, Battery Transfer Page 6
Side Removal, Powered Travel, Battery Transfer Page 7
Side Removal, Manual Travel, Battery Transfer Page 8
A-Frames / Overhead Extraction Page 9
Overhead Handling & Stands, Hoists Page 10
Overhead Handling Accessories Page 11
Battery Washing / Water Recycling Page 12
Battery Room Accessories / Battery Management Page 13
Battery Room Accessories Page 14
Hydra-Handler Overview Page 15
TERMS
· Contact your dealer for details.
TERMINOLOGY
“R” Height or “R” Dimension = The measurement from the floor to the top of the roller in the charger stand. This height should be specified when ordering charger stands.
“R” Height or “R” Dimension also refers to the measurement from the floor to the bottom of the battery in the forklift.
Charger stand “R” Height is normally specified at the same height as the “R” Dimension of the battery in the forklift. This minimizes the need to adjust height when transferring batteries between the two.
Stand “H” Dimension = the measurement from the top of the rollers to the bottom of the charger platform. This is important for charging bat-teries with covers. Dimension page 8
Sackett Systems Inc.
Battery Exchange Equipment
We at Sackett Systems know the importance of keeping your electric lift truck fleet moving to ser-vice your logistical needs at all times. Our entire range of fork truck battery exchange equipment is designed to be the industry standard in durability and reliability, to maximize your productivity and increase your up-time. Sackett Systems backs up this pledge with the best warranty in the industry – 3-years on structural elements and transfer roll-ers.
Sackett products have withstood the tests of time and of extreme operations. Sackett has been sat-isfying customers with material handling equip-ment for over 120 years! Many of our systems have been in profitable operation with satisfied customers for over 20 years.
Sackett Systems has the products and services to meet your needs no matter the size and com-plexity of your warehouse or factory operation. From simple transfer carts, to the most complex, automated, battery exchange systems, you can count on Sackett for industry – leading quality, service, and responsiveness. Our products get the job done right, with consistent up-times, longer lifecycles, and lower costs of ownership. Rest as-sured, we’ve got you covered day in, day out.
We invite you to use this catalog to find the Sack-ett product that meets your particular needs. If you do not find what you are looking for, please give us a call.
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 2
25” Deep Charger Platform
CS-**-2
FEATURES: (For all Stands)
· Adjustable height +/- 11⁄2”
· Non Conductive rollers - with double sealed bearings
· Charger platform 800 lb. capacity
50”
46”
40”
Feature CS Stand ECS Stand
Upright Size 3” x 3” x 1⁄8” 2.5” x 2.5” x 1⁄8”
Battery Clearance (“H” Dimension)
50” 40”
Legs 1” Threaded Rod 3⁄4” Threaded Rod
R-Dimensions 5-1⁄4” - 19-1⁄4” 5-1⁄8” - 8”
Options All All
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 3
SIDE REMOVAL BATTERY STANDS
* High Leg Kit
* LCP Stand(with High Leg Kit
Use roller width 3” greater than
battery to allow proper cooling
ROLLER CHARGING STANDS2 COMPARTMENTMODEL ROLLER WIDTH W SHIPPING WEIGHTCS12-2 12’ 261⁄2” 235 lbsCS15-2 151⁄4” 33” 288 lbsCS18-2 18” 381⁄2” 313 lbsCS21-2 21” 441⁄2” 326 lbsCS24-2 24” 501⁄2” 340 lbsCS27-2 27” 561⁄2” 375 lbsCS30-2 30” 621⁄2” 395 lbsCS33-2 33” 681⁄2” 480 lbsCS36-2 36” 741⁄2” 510lbs
3 COMPARTMENTMODEL ROLLER WIDTH W SHIPPING WEIGHTCS12-3 12” 383⁄4” 280 lbsCS15-3 151⁄4” 481⁄2” 330 lbsCS18-3 18” 563⁄4” 390 lbsCS21-3 21” 653⁄4” 440 lbsCS24-3 24” 743⁄4” 455 lbsCS27-3 27” 833⁄4” 515 lbsCS30-3 30” 923⁄4” 570 lbsCS33-3 33” 1013⁄4” 730 lbsCS36-3 36” 1103⁄4” 740 lbs
4 COMPARTMENTMODEL ROLLER WIDTH W SHIPPING WEIGHTCS12-4 12” 51” 500 lbsCS15-4 151⁄4” 64” 566 lbsCS18-4 18” 75” 616 lbsCS21-4 21” 87” 660 lbsCS24-4 24” 99” 700 lbsCS27-4 27” 111” 740 lbsCS30-4 30” 123” 780 lbsCS33-4 33” 135” 822 lbsCS36-4 36” 147” 860 lbs
6 AND 8 COMPARTMENTMODEL ROLLER WIDTH W SHIPPING WEIGHTCS12-6 12” 751⁄2” 465 lbsCS15-6 151⁄4” 95 580 lbsCS18-6 18” 1111⁄2” 750 lbsCS21-6 21” 1291⁄2” 880 lbsCS12-8 12” 100 710 lbsCS15-8 151⁄4” 123” 790 lbsCS18-8 18” 147” 870
“R” Dimensionrequired when
ordering any stand.
“R” = Floor to Top of Roller
Total
Roller Bed
STAND OPTIONS Two Compartments Three Compartments Four Compartments
Less Charger Platform (LCP) √45” Roller Bed √Drip Pan BracketsR-Dimension > 8” High Leg KitBackstops Ea. Comp. Batteries < 35”
* (√) Indicates a non-returnable item
ECS-**-3
CHARGER MOUNTING & CABLE RETRACTORS
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 4
* No Modifications allowed on Eclipse Stands
POGO STICKS - Cable RetractorMODEL SHIPPING WEIGHT1769 (Pogo Stick basic) 6 lbs5079 (Pogo w/chain & suspender) 7 lbsB802327 Pogo Stick Bracket
CHARGER CABLE SUSPENSIONMODEL SHIPPING WEIGHT1768 Charger Mounted 20lb. Pull Strength 4 lbs3495 Wall Mounted 4 lbs
ECLIPSE BATTERY CHARGING STANDS2 COMPARTMENTMODEL SHIPPING WEIGHTECS15-2 √ 210 lbsECS18-2 √ 230 lbsECS21-2 √ 250 lbsECS24-2 √ 278 lbsECS27-2 √ 295 lbs
3 COMPARTMENTMODEL SHIPPING WEIGHTECS15-3 √ 318 lbsECS18-3 √ 335 lbsECS21-3 √ 360 lbsECS24-3 √ 371 lbsECS27-3 √ 425 lbs
1769 5079
Pogo Sticks
CSSWCS-P
46”40”
Total
Roller Bed40”
3495
MODEL A B C D H WVCM-60-1SS 12” x 12” 4” - 40” 6” - 20” - 60” 28”VCM-60-2DS 12” x 12” 4” - 40” 6” - 20” - 60” 28”VCM-60-2SS 12” x 12” 4” - 40” 6” - 20” 26” 60” 53”VCM-60-4DS 12” x 12” 4” - 40” 6” - 20” 26” 60” 53”
CHARGER MOUNTING SLOTS
POGO STICK MOUNTS
FOR MODELVCM-60-1SSVCM-60-2DS
FOR MODELVCM-60-2SSVCM-60-4DS
CHARGER SUPPORT STANDSMODEL W SHIPPING WEIGHTCSS24 24” 80 lbsCSS36 36” 100 lbsCSS72 72” 120 lbsCSS96 96” 135 lbsCSS120 120” 145 lbsCSS144 144” 195 lbsWCS-2 (Brackets Only) 30 lbsWCS-P (Brackets & 36” x 24” Platform) 60 lbsB802327 Mounting Bracket for Pogo Sticks4 legged charger stand 96”W x 30”D x 42” HCSS Stand Casters
* (√) Indicates a non-returnable item
VERTICAL CHARGER MOUNTSMODEL DESCRIPTION SHIPPING WEIGHTVCM-60-1SS 1 Charger, Single Side 70 lbs.VCM-60-2DS 2 Charger, Dual Side 85 lbs.VCM-60-2SS 2 Charger, Single Side 80 lbs.VCM-60-4DS 4 Charger, Dual Side 105 lbs.
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 5
Protect your investment with Drip Pan Kits Drip Pan Kits should be considered for all battery charging stands. Drip Pans capture and contain spills of electrolyte that can occur during the charging of industrial batteries. Drip Pan Kits meet the containment requirements of OSHA Regulation 1926.441 (a) (3). Sackett Systems offers high density Polyethylene drip pans because of its superior resistance to acid and electrolyte solutions. Stainless steel drip pans are also available upon request.
DRIP PAN KITS
SINGLE LEVEL DRIP PAN KITS2 COMPARTMENTPART NUMBERCS12-2-DPK-PCS15-2-DPK-PCS18-2-DPK-PCS21-2-DPK-PCS24-2-DPK-PCS27-2-DPK-PCS30-2-DPK-PCS33-2-DPK-PCS36-2-DPK-P
3 COMPARTMENTPART NUMBERCS12-3-DPK-PCS15-3-DPK-PCS18-3-DPK-PCS21-3-DPK-PCS24-3-DPK-PCS27-3-DPK-PCS30-3-DPK-PCS33-3-DPK-PCS36-3-DPK-P
4 COMPARTMENTPART NUMBERCS12-4-DPK-PCS15-4-DPK-PCS18-4-DPK-PCS21-4-DPK-PCS24-4-DPK-PCS27-4-DPK-PCS30-4-DPK-PCS33-4-DPK-PCS36-4-DPK-P
6 COMPARTMENTPART NUMBERCS12-6-DPK-PCS15-6-DPK-PCS18-6-DPK-P
8 COMPARTMENTPART NUMBERCS12-8-DPK-PCS15-8-DPK-PCS18-8-DPK-P
BATTERY SERVICE STANDSMODEL ROLLER WIDTH W SHIPPING WEIGHTBSS15 15” 171⁄2” 100BSS21 21” 231⁄2” 125BSS24 24” 261⁄2” 140* R=Roller Height * Please specify desired height
Drip Pan Absorbent Pad
Battery Service Stands (BSS)
Removable Drip Pans for easy cleanup and protection.
BATTERY SERVICE STANDS DRIP PAN KITSMODELBSS15-DPK-PBSS21-DPK-PBSS24-DPK-P
A-PJTC B-PJTC(Powered Extraction)
*Drive under base or Fork Pocket Also Available
X-CHANGER (XTC)
PTC-TM
HPT-DL
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 6
SIDE REMOVAL, POWERED TRAVEL, BATTERY TRANSFER EQUIPMENTTRANSFER CARTS - PALLET JACK MOUNTED
MODEL SHIPPING WEIGHTA-PJTC24 √ 625 lbsB-PJTC24 717 lbsB-PJTC30 740 lbsB-PJTC36 840 lbsC-PJTC24 1025 lbsC-PJTC30 1100 lbsC-PJTC36 1250 lbs
FEATURES:· 4,000 lb capacity · Magnet or Vacuum Extraction· 48” fork required · 61⁄4” to 121⁄4” roller height standard· Pallet Jack not included · Adjustable Telescoping Extraction from 4” - 81⁄2”
TRACK MOUNTED TRANSFER CARTSDC POWEREDMODEL SHIPPING WEIGHTXTC24 1405 lbsXTC30 1405 lbsXTC36 1406 lbs
XTC FEATURES:· On-Board 12Volt, DC battery system included· No Operator Compartment
AC POWEREDMODEL SHIPPING WEIGHTPTC24 1405 lbs
PTC30 1405 lbs
OPTIONS:AC units require Cable Reel or Buss
Track, 11⁄2” Flat (B800361A)5” minimum ‘R’ dimensionSide Operator Platform (specify left (std) or right) PTC Only
FEATURES:· 4,000 lbs capacity · 6” standard ‘R’ dimension· Power Travel / Power lift · 40” Deep Compartment· Rack & Pinion Equalization · Adjustable Telescoping Extraction from 4” - 81⁄2”· Magnet or Vacuum Extraction
DUAL LEVEL PALLET JACK TRANSFER CARTSMODELHPT-DL √*Compartment Size
Compartment Lower Upper
R 53⁄8” - 113⁄8” 141⁄4” -201⁄4”
Max Width Up to 24” Up to 42”
*Upper Compartment width must be at least 12” > Lower Compartment
FEATURES:· 5,000 lbs capacity · Adjustable Telescoping Extraction from 4” - 81⁄2”· 54” forks required · Magnet or Vacuum Extraction· ‘Y’ Connector (included)
· Lower Level Battery Rollers Available 61⁄4” “Min “R”
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
OPTIONS:45” Deep Roller Bed (for use with 54” forks)Drive Under Base (not mounted to pallet jack)Fork Pockets (90° for fork lift use)(battery pack reccomended)Battery Pack - (2) 6-volt Batteries (with fork pockets only)Battery Charger4 Button PendantMounted to Supplied Pallet JackNo Vacuum (‘HP’ Denotes Hook & Pull)High “R” Spacer - > 121⁄2” R36 Volt Hook & Pull Only - Optional36-Volt Controls w/ Y-Connector & Magnet (Not for use with Vacuum)Bolt / Clamp kit for PJTC to the Pallet JackRemovable Slide Bed (75 lbs.)
* (√) Indicates a non-returnable item
HPT
HPT-PL
HFT
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 7
SIDE REMOVAL, POWERED TRAVEL, BATTERY TRANSFER EQUIPMENT
Shown w/ High ‘R’ Spacer
TRANSFER CARTS -HEAVY DUTY PALLET JACK MOUNTEDMODEL SHIPPING WEIGHTHPT24 1200 lbsHPT30 1245 lbsHPT36 1385 lbsHPT42 1455 lbs
FEATURES:· 5,000 lb capacity· Heavy duty construction· Adjustable Telescoping Extraction from 4” - 81⁄2”· Powered Push/Pull Magnet or Vacuum Extraction· Standard Roller height from 63⁄4” to 123⁄4”· 23⁄8” dia. Rollers with Polythlene sleeve and double sealed ball bearings· ‘Y’ connector (included)· 54” forks required · Magnet or Vacuum Extraction
PALLET JACK MOUNTED WITH POWERED LIFT MODEL SHIPPING WEIGHTHPT30-PL 1230 lbsHPT36-PL 1300 lbsHPT42-PL 1370 lbs
FEATURES:· 5,000 lb capacity· Heavy duty construction· Magnet or Vacuum Extraction· Adjustable Telescoping Extraction from 4” - 81⁄2”· 60” forks required· Factory welded to pallet Jack· ‘Y’ connector (included)· Transfer Height 63⁄4” - 263⁄4”· Magnet or Vacuum Extraction
FEATURES:· 5,000 lb capacity· Heavy duty construction· Magnet or Vacuum Extraction· Adjustable Telescoping Extraction from 4” - 81⁄2”· 90-Degree Fork Pockets· Cost effective backup to Hydra-Handler application· Fork Mounted Units supplied with 10’ lead to tap off battery· Magnet or Vacuum Extraction
OPTIONS:45” or 50” Roller Bed (require longer forks)High-R Spacer
Options45” or 50” Roller BedHigh-R Spacer (HPT Only)Hydraulic Flip Up Stop
FORK MOUNTED (HEAVY DUTY)*MODEL SHIPPING WEIGHTHFT30 1295 lbsHFT36 1435 lbsHFT42 1505 lbs* Includes 4 Button Pendant, Battery and Charger
FORK MOUNTED (HEAVY DUTY) VACUUM w/ Y-ConnectorMODELHFT30-V-YHFT36-V-YHFT42-V-Y* Includes 4 Button Pendant
FORK MOUNTED (HEAVY DUTY) MAGNET w/ Y-ConnectorMODELHFT30-M-YHFT36-M-YHFT42-M-Y* Includes 4 Button Pendant
TC**-PN
TC**-PP
PTC
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 8
HYDRAULIC POWERED LIFT AND EXTRACTION WITH VACUUM
12 VOLT DC POWEREDMODEL SHIPPING WEIGHTPTC24-*** √ 997 lbsPTC30-*** √ 1045 lbs
OPTIONS (For All TC Carts)45” Roller Bed Roll Back Brake Kit (B804197) 2 floor locks & mount padsTrack Mounted - Manual TravelTrack, 11⁄2” Flat (B800361A)
OPTIONS: (For Powered TC Carts)MODEL SHIPPING WEIGHTCharger (P/N 4926A) 24v for use with magnetNo Battery Pack (2) 6 Volt Batteries
SIDE REMOVAL, MANUAL TRAVEL, BATTERY TRANSFER EQUIPMENT
FEATURES:· Adjustable Telescoping Extraction from 4” - 81⁄2”· Floor Lock· Non-Conductive rollers - with double sealed bearings· Composite wheels· Standard Roller Bed = 40”· Flip up battery Safety stop· “R” Dimension between 57⁄8” and 23”· Vehicles with Outriggers - Consult Factory· Magnet or Vacuum Extraction· ***Rack & Pinion Equalization
ROLLER TRANSFER CARTSPUSH/PULL PLATEMODEL W SHIPPING WEIGHTTC24-PN √ 24” 770 lbs
TC30-PN √ 30” 820 lbs
HYDRAULIC POWERED LIFT ONLY12 VOLT DC POWEREDMODEL W SHIPPING WEIGHTTC18-PL √ 18” 967 lbs
TC24-PL*** √ 24” 994 lbs
TC30-PL*** √ 30” 1018 lbs
HYDRAULIC POWERED PUSH/PULL PLATE ONLYMODEL W SHIPPING WEIGHTTC18-PP √ 18” 920 lbs
TC24-PP √ 24” 980 lbs
TC30-PP √ 30” 1040 lbs
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
PTAF
PAF
Hoist/Trolley not included in price (See Page 11)
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 9
A-FRAME USAGE CHARTMODEL WHEELS DRIVE TYPE APPLICATION
PAFPortable A-Frame with
Swivel CastersManual Battery Maintenance Area
TAF Track Mounted ManualLight Duty Overhead
Battery Changing
PTAF Track Mounted PoweredStandard and Heavy Duty
Battery Changing
A-FRAMES / OVERHEAD EXTRACTIONTWO TON “A” FRAMES
2 TON PORTABLE “A” FRAMEMODEL SHIPPING WEIGHTPAF10-2T √ 728 lbsPAF12-2T √ 774 lbsPAF14-2T √ 856 lbsPAF16-2T √ 907 lbsPAF18-2T √ 1140 lbsPAF20-2T √ 1143 lbs
2 TON MANUAL TRAVELING “A” FRAMEMODEL SHIPPING WEIGHTTAF10-2T √ 818 lbsTAF12-2T √ 864 lbsTAF14-2T √ 946 lbsTAF16-2T √ 997 lbsTAF18-2T √ 1230 lbsTAF20-2T √ 1233 lbs
2 TON POWERED TRAVELING “A” FRAMEMODEL SHIPPING WEIGHTPTAF10-2T √ 1661 lbsPTAF12-2T √ 1707 lbsPTAF14-2T √ 1789 lbsPTAF16-2T √ 1840 lbsPTAF18-2T √ 1873 lbsPTAF20-2T √ 1876 lbsPTAF22-2T √ 2395 lbs
THREE TON “A” FRAMES3 TON PORTABLE “A” FRAMEMODEL SHIPPING WEIGHTPAF10-3T √ 728 lbsPAF12-3T √ 805 lbsPAF14-3T √ 1000 lbsPAF16-3T √ 1016 lbsPAF18-3T √ 1197 lbsPAF20-3T √ 1273 lbs
3 TON MANUAL TRAVELING “A” FRAMEMODEL SHIPPING WEIGHTTAF10-3T √ 818 lbsTAF12-3T √ 895 lbsTAF14-3T √ 1090 lbsTAF16-3T √ 1106 lbsTAF18-3T √ 1287 lbsTAF20-3T √ 1363 lbs
3 TON POWERED TRAVELING “A” FRAMEMODEL SHIPPING WEIGHTPTAF10-3T √ 1803 lbsPTAF12-3T √ 1880 lbsPTAF14-3T √ 2075 lbsPTAF16-3T √ 2091 lbsPTAF18-3T √ 2272 lbsPTAF20-3T √ 2348 lbsPTAF22-3T √ 2769 lbs
A-FRAME OPTIONSPoly Wheel - one side (PTAF Only)Single-Sided Track (PTAF Only) - with poly wheel option Dual Track (Recommended)Railroad Crossing 12’ Under Beam (standard on 3 ton units)13 ft & Higher Under BeamFestooning (on TAF only)
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
CS**-P(Plastic Inserts)
*Wood inserts available upon request
HDPE CHARGING STANDSMODEL W SHIPPING WEIGHTCS30-P 32” 310 lbs
CS42-P 44” 340 lbs
CS60-P 62” 475 lbs
CS72-P 74” 510 lbs
CS84-P 86” 560 lbs
CS90-P 90” 590 lbs
CS96-P 96” 620 lbs
CS100-P 100” 640 lbs
OPTIONS:45” BedLeft to Right Poly inserts > 100”“LCP” Less charger Platform** deduct
FEATURES:· Chemical Resistant poly charging surface· Available without Charger Platform· Charger Platform 800 lb capacity· Corrosion Resistant Spacers· Standard ‘H’ Dimension of 50” unless otherwise specified
HDPE STAND DRIP PAN KITSPART NUMBER LIST PRICE PART NUMBER LIST PRICECS30-P-DPK-P $298 CS90-P-DPK-PCS42-P-DPK-P $321 CS96-P-DPK-PCS60-P-DPK-P $583 CS100-P-DPK-PCS72-P-DPK-P $626 CS120-P-DPK-PCS84-P-DPK-P $658 CS144-P-DPK-P
HOISTS2-Ton Electric (480v, 3ph)PART NO. DESCRIPTION SHIPPING WEIGHT
7238Motorized Trolley, chain container, 4-button pendant (TAF, PAF)
240 lbs
7239Motorized Trolley, chain container, 6-button pendant (PTAF)
240 lbs
3-Ton Electric (480v, 3ph)PART NO. DESCRIPTION SHIPPING WEIGHT
7241Motorized Trolley, chain container, 4-button pendant (TAF, PAF)
311 lbs
7242Motorized Trolley, chain container, 6-button pendant (PTAF)
311 lbs
FEATURES:· 60-Minute rated, fan cooled 2.4HP motor· NEMA 3R Rating· Cast Iron chain guide for durability· Single Load Chain for ease of use· Standard Electric trolley brake to assist load control
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 10
OVERHEAD HANDLING & STANDS, HOISTS
*Specify wall construction type when ordering.
Cable Reels
CS**-P
50”
25” Deep Charger Platform
14”
Total
Depth40”
48”
Hoist Part #7239
CABLE REELS FOR A-FRAME SYSTEMPART NO. DESCRIPTION PRICE6296 30-ft. w/Guide Arm6295 50-ft. w/Guide Arm6300 70-ft. w/Guide Arm
Swivel Base (If Needed)
L
91⁄4”
15”
53⁄4”
B4000
40”
A
W
TC
Add $98 for Outriggers if “A” is under 101⁄4”
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 11
21”11 1⁄2”
14 1⁄2”
BFA6000
B800482-1(Safety Hook)
OVERHEAD HANDLING ACCESSORIES
LBS(Battery Lifting Beam Stand)
S
BATTERY LIFTING BEAMSMODEL CAPACITY L S SHIPPING WEIGHTB4000 4000 lbs 43” 24”-39” 52 lbsB6000 6000 lbs 47” 28”-43” 60 lbsB4000SH w/ safety hook 4000 lbs 43” 24”-39” 55 lbsB6000SH w/ safety hook 6000 lbs 47” 28”-43” 63 lbs
5 OR MOREMODEL CAPACITY L S SHIPPING WEIGHTB4000 4000 lbs 43” 24”-39” 52 lbsB6000 6000 lbs 47” 28”-43” 60 lbsB4000SH w/ safety hook 4000 lbs 43” 24”-39” 55 lbsB6000SH w/ safety hook 6000 lbs 47” 28”-43” 63 lbs
BEAM FORK ATTACHMENTMODEL SHIPPING WEIGHTBFA6000 28 lbsLifting Beam Stand Lifting Beam Stand
SAFETY HOOK ASSEMBLYMODEL DESCRIPTIONB800482-1 Safety Hook Assembly (2 safety hooks)
HDPE TRANSFER CARTSMODEL W A SHIPPING WEIGHTTC20-W 211⁄2” 123⁄4” 250 lbsTC30-W 311⁄2” 123⁄4” 293 lbsTC40-W 411⁄2” 123⁄4” 335 lbs
WITH ROLLER BEDMODEL W A SHIPPING WEIGHTTC20-R 211⁄2” TBD 220 lbsTC30-R 311⁄2” TBD 260 lbs
FEATURES:· HDPE Base· Floor Lock· 5” Diameter Casters· (Non Adjustable) Roller Bed Available
FEATURES:· 6,000 lb rating· 4ft safety chain with chain hook· Fork Openings 15⁄8” x 61⁄2”
MODEL A w/WRS
MODEL B MODEL B+
WRS-Base Unit WRS-P
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 12
*Portable Units include Fork Pockets, Casters, and Lift Handle
CONSULT FACTORY FOR HYDRA-HANDLERS ®AND ALL MULTI-STACKING SYSTEMS
BOW
MODEL WR-1R
Roller Wash Rack
R-Dimension = 11”
MODEL WR-1
Plastic Wash Rack
R-Dimension = 14”
INCLUDES:
· Drain Tray
· Splash Sides
BATTERY WASHING / WATER RECYCLING
*wood inserts available
WR-1RW-WRS
BATTERY WASH RACKSMODEL WIDTH DEPTH SHIPPING WEIGHTWR-1 Plastic Inserts Wash Rack 45” 48” 645 lbs
WR-1R Roller Wash Rack 45” 511⁄2” 660 lbs
WR-1R PORTABLE WASH RACKSMODELPortable Plastic Inserts Wash Rack *Portable Roller Wash Rack (Includes 4-Way Entry Forks)
AUTOMATIC BATTERY WASHERSMODEL SHIPPING WEIGHTA’ (Gravity Rollers/Powered Door) √ 1330 lbs‘B’ (Powered Rollers/Powered Door) √ 1870 lbs‘B+’ w/infeed conveyer (non-reversing) √ 2905 lbs‘BB+’ w/infeed conveyor (reversing) √ 2905 lbs‘C’ w/infeed & outfeed conveyors (non-reversing) √ 3200 lbs‘Dbl B+’ w/infeed & outfeed conveyors (reversing) √Air Compressor (use with Automatic Battery Washer) √
OPTIONS:Low ‘R’ dimension for use with PJ carts + ‘WRS’Handheld Scrub Brush w/hoseRear Casters & Lift Jack HandleFork Extensions 5 ft LongBottom Blade Scrub Brush
COMBOSMODEL SHIPPING WEIGHTModel A’ with WRS & Scrub Brush √ 2085 lbs‘BOW’ (WRS mounted under Washer) √WR w/ WRS (with scrub brush) √
OPTIONS:Bottom Scrub Brush (not available on Model A) Bottom Blade Scrub Brush11” ‘R’ dimension for PJ carts (Model ‘A’)5 gal Conditioner (P/N 4228) (Not for use with WRS)Air Compressor (P/N5497)
WATER RECIRCULATING SYSTEMMODEL SHIPPING WEIGHTWRS- Base Unit √ 755 lbsWRS-P- Portable Unit √ 855 lbs
OPTIONS:1 gal Neutralizer Concentrate (P/N 8045 for use with WRS)5 gal Detergent (P/N 4228 not for use with WRS)5 gal Neutralizer Concentrate (P/N 8054 for use with WRS)Deionizer (6305)Extra Filler Cartridges (6306)
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
BATTERY MAINTENANCEMODEL DESCRIPTION SHIPPING WEIGHT1747 BCF18” Battery Cell Filler 1748 BCF33” Battery Cell Filler 1749 Water Gun 1.5 lbs6305 Deionizer 28 lbs5504 20-ft Hose4476 50-ft Hose 6306 Extra Filler cartridge (Deionizer) 14 lbs
872410-gal. Water Cart (Does not include Water Gun)
30 lbs
SAFETY EQUIPMENTMODEL DESCRIPTION
8842Safety Equipment Pak Include (2)15ml Vinyl Aprons, (2) sets of gloves & HeadGear
6529 Shower & Eye Wash6580 Eye Wash Wall Mounted (portable)6767 Personal Eye Wash, w/saline-filled bottle7862 Spill Kit 72 lbs9585 Spill Kit 10 lbs
BATTERY ROOM ACCESSORIES / BATTERY MANAGEMENT
BATTERY MANAGEMENTMODEL DESCRIPTION7006 Red, Yellow, and Green light indicator7006-80 80v7006-Dual 2 readouts / housing7006-S w/ charger stop button7006-E w/charger equalization button7006-SE w/charger stop & EqualizationBattery Management Systems
SACKETT BATTERY MANAGEMENTMODEL DESCRIPTIONSBMLite Up to 50 Chargers 1 Battery PoolSBMPlus Up to 100 Chargers 9 Battery PoolsSBMPro Up to 350 Chargers 9 Battery Pools
SAFETY SIGNAGEMODEL DESCRIPTION9712 Pack of 9 Safety Signs
The SBM with Real-Time Monitor enables the most cost-effective utlization of your pool of batteries. It ensures proper battery rotation, which is critical to long battery life and maximum run time. SBM monitors all batteries in a pool and eliminates operator judge-ment in battery selection by determining which battery has had the longest cooling time since charging. Once charged, each battery is placed in a queue. The simple-to-use SBM “read and react” Display then tells the operator which battery to take. An audible alarm called the Shouter alerts the operator when the wrong battery is taken. And the Real-Time Monitory provides all the information needed to efficiently manage the battery pool.
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 13
RD-100 (P/N 7006)SBM
ACID ABSORBING AND NEUTRALIZING PADS & PILLOWSMODEL DESCRIPTION9710-1 Neutralizing Pads 11”x12” (pack of 25)9710 Absorbs up to 32oz each (pack of 10)*Pads Available in a varity of Sizes Consult Factory for more details
1747/1748 Battery Cell Filler
8724 10-gal. Water Cart
7862/9585 Spill Kit
6529 Shower & Eye Wash
9710 Drip Pan Absorbant Pad
8842 Safety Kit
BATTERY ROOM ACCESSORIES
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 14
SACKETT SAFETY RAILMODEL DESCRIPTIONSackett Safety Rail Single √ Single Safety Rail with Columns includedSackett Safety Rail Double √ Double Safety Rail with Columns included
PDP POWER DISTRIBUTION PANELMODEL DESCRIPTION8682-30 √ Eight Position Power Distribution Panel - 30 Amps8682-20 √ Eight Position Power Distribution Panel - 20 Amps8681-30 √ Six Position Power Distribution Panel - 30 Amps8681-20 √ Six Position Power Distribution Panel - 20 Amps8680-30 √ Four Position Power Distribution Panel - 30 Amps8680-20 √ Four Position Power Distribution Panel - 20 Amps
HYDROGEN DETECTORMODEL DESCRIPTION9159 Hydrogen Gas Detector
BATTERY VENTILATIONMODEL DESCRIPTIONCSOP-VENT Stand Mounted Ventilation -exhaust fan not included
* Per Compartment Pricing
The PDP5000 is a modular power distribution panel that is mounted directly to Sackett Systems’ stands at the factory.
Reduce the number of conductors pulled from the main panel from one per charger, to one per stand. UL Rated.
DUAL LEVEL CHARGER SUPPORT STANDSMODELVarious Models Available √
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
* (√) Indicates a non-returnable item
HYDRA-HANDLER MAXMAX
HYDRA-HANDLER ELITEELITE
HYDRA-HANDLER SELECTSELECT
HYDRA-HANDLER SUPERSUPERThis narrow footprint, single stack battery changer with one or two compartments can be powered via AC operating voltage. Converting from a narrow aisle changer, manual or pallet jack mounted battery exchange system to the Hydra-Handler Super can cut battery change times in half.
As Sackett’s flagship operator-on-board battery handler, the Select features a unique heavy duty rack and pinion extractor arm,
2” (51mm) axles and 10 HP motor for a unit that has field-proven durability and reliability. With industry-leading, built-in safety
features and vacuum or magnet extraction, the Hydra-Handler Select can be customized for systems one to 3-high.
With all the quality capabilities of the Hydra-Handler Select, the Max features PLC controlled hydraulic valves which allow for faster lift, smoother starts and stops, easier feathering of the controls and adjustability of the lift and travel functions. The valves also facilitate troubleshooting with built-in indicator lights. The Hydra-Handler Max can be configured for 1-high to 5-high stacking applications and is the ideal Hydra-Handler in high-volume battery changing operations.
Dramatically increase efficiency and reduce labor costs with the Hydra-Handler Elite. Forklift operators are able to safely and quickly change
their own batteries while laser photo eyes and ultrasonic sensors eliminate damage to equipment. Battery changes happen faster, because
the system automatically travels to pre-programmed battery changing positions. Plus, the First-In, First-Out battery management software
maximizes battery life and reduces the amount of batteries required.
THIS IS HOW THE BEST RUN COMPANIES STAY UP AND RUNNING.
630 766-5500 / FAX 630 766-5631 / [email protected] / www.sackettsystems.com page 15