-
7/30/2019 Process Technology Organization
1/4
PROCEDURE NO.
PTD-REF-100
PAGE OF
1 5
PROCESS TECHNOLOGY PROCEDURES
PREPARED BY
Edited from existing doc
By J.J. Powers
DATE
April 30, 2000
DEPARTMENT: PROCESS TECHNOLOGY
APPROVED BY
SUBJECT: PROCESS TECHNOLOGY ORGANIZATIONREVISION DATE
Feb. 16, 2005
REV.
2
1.0 SCOPE
This section of the Operating Manual establishes the
responsibilities of the ProcessTechnology departments at each
office location.
2.0 RESPONSIBILITIES
Process Technology has a wide range of functions and
responsibilities for the executionof projects in Parsons E&C
business areas, specifically Refining, Oil & Gas, Sulfur
Recovery Technology, Power, and Chemicals &
Petrochemicals.
Responsibilities include:
Technical stewardship of Parsons E&C proprietary Sulfur
Recovery Technology
Supporting Business Development in the acquisition of new
work
Insuring the technical integrity of process design deliverables
issued on a project
Acquiring or developing proprietary technology Managing
technology alliance relationships
Representing Parsons E&C in Industry or Trade
Organizations
-
7/30/2019 Process Technology Organization
2/4
The Vice President of Process Technology is responsible for:
Aligning and coordinating between all offices on Process
Engineeringprocedures, design guidelines, methods, and tools
Managing and administrating process simulation software
contracts
Coordinating memberships to technical organizations such as the
HTRI, NPRA,GPSA and others
Coordinating the activities related to Sulfur Technology
Managing technology alliance relationships
Reviewing and approving Process Technology Confidentiality
Agreements
Approving the publication of Process Technology papers for
publication orpresentation to industry conferences
3.2 Process Technology Department Managers
Each Operations Center (Houston, London, and Arcadia) has a
local ProcessEngineering Department Manager who reports
functionally and administratively to
the office Operations Manager, a Senior Vice President. Each
office has a slightlydifferent organization based on local need.
Local Process Engineering staffmembers report to each Process
Technology Department Manager. Personnel onprojects also report to
the Lead Process Engineer on the project.
The Process Technology Manager assigns all Process personnel,
including LeadProcess Engineers, to each project. All Process
personnel report to the LeadProcess Engineer on each project.
Each office has very experienced personnel who specialize in
technology andproject management. Their duties include supporting
our client base by providingProcess Technology solutions,
developing process designs, solving operational
-
7/30/2019 Process Technology Organization
3/4
4.0 DELIVERABLES
Process Technology is responsible for the conceptualization,
development and detailedprocess design of facilities for clients
served by Parsons E&C in energy and chemicals.Process
Technology may have responsibility for all the activities in the
process design
cycle or only portions on larger projects.
On some projects Process Technology may receive a front end
package from anotherengineering contractor or may develop that
package. Also, Process Technology may berequired to develop a
functional specification for a process unit and acquire the
actualdesign from a process licensor such as UOP, Axens,
ExxonMobil, or others. ParsonsE&C has a well-qualified staff to
perform fundamental process conceptualization anddesign, including
simulation modeling of processes with very difficult and
complex
chemistry or process configuration.
Process deliverables are designs, drawings, calculations,
reports, or specifications andmay include any or all of the
following:
Studies process or feasibility, including project economics
o Safety Reviews, such as PHA or HAZOP
o
Environmental, such as determination of action required for
regulatory complianceo Process Improvement, capacity increase, or
energy reduction
o Market Study Requests to a marketing consultant
Process Flow Diagrams, Material and Energy Balances
Piping and Instrument Diagrams
Utility and Off-site system designs
Hydraulic Calculations
Elementary Control Logic design
Relief system design
-
7/30/2019 Process Technology Organization
4/4
Process Technology
Technical Directors Chief Process Engineers Process Engineers
Mechanical Process Engineers
Commissioning Manager
Arcadia Project Operations London Project Operations Houston
Project Operations
HoustonProcess Technology Manager
ArcadiaProcess Technology Manager
LondonProcess Technology Manager
Technical Directors Chief Process Engineers Process Consultants
Process Engineers
Operations & Maintenance Mgr
Technical Directors Chief Process Engineers Process Engineers
Commissioning Manager
Worldwide
Process Technology Manager
