Proceedings of 3rd International Multi-Topic ... - IMCES

Proceedings of 3rd International Multi-Topic Conference on Engineering and Science (IMCES) 2-3 June 2020 Faculty of Information Technology, Universitas YARSI, Jakarta, Indonesia

https://imces.tech/ ISBN: 978-81-943783-1-0

Proceedings of 3rd International Multi-Topic Conference on Engineering and Science (IMCES)

2-3 June 2020

Faculty of Information Technology, Universitas YARSI, Jakarta, Indonesia https://imces.tech/

Proceedings Editor:

Bishwajeet Pandey, Jason Levy, Ciro Rodriguez, Yousef A. Baker El-Ebiary, Bhawani Shankar Chowdhry, Ummi

Azizah Rachmawati, Sri Chusri Haryanti

ISBN: 978-81-943783-1-0

https://imces.tech/

https://imces.tech/

Proceedings of 3rd International Multi-Topic Conference on Engineering and Science (IMCES) 2-3 June 2020, Faculty of Information Technology, Universitas YARSI, Jakarta, Indonesia


1

OUR PAST CONFERENCE IN HAWAII, USA: 2019, 2020

https://imces.tech/



2

OUR PAST CONFERENCE IN DENMARK:2018, 2016

https://imces.tech/



3

Chair Message

As a chair, we have the honor to welcome you with great respect and enthusiasm to the 3rd

IMCES® to be held at the Faculty of Information Technology, Universitas YARSI, Jakarta,

Indonesia on 2 – 3 June 2020.  IMCES® intends to attract innovative technical and scientific work

in the field of engineering and technology. The response to the conference was overwhelming and

we are proud to state that we have received really good quality contributions and we are sure as a

participant you will share the same sentiment. All accepted papers will be submitted to

Scopus/ESCI/Crossref Index Journals (see list on conference website) and hopefully these papers

will be available online by middle of 2020.

As a chair and on behalf of the organizing committee, we sincerely hope that IMCES® will offer

a great venue in Jakarta, Indonesia to the participants coming from different parts of the world to

share and contribute in the areas of their expertise. We are also confident that our keynote speakers

will be able to enrich your knowledge during the conference and we wish you a very pleasant and

enjoyable stay in Indonesia. It is the 12th  conference hosted by Gyancity Research Lab, next two

are following:

6th International Conference on Green Computing and Engineering Technologies (ICGCET®) 16

Sep - 18 Sep 2020 Herzen State Pedagogical University of Russia, St Petersburg, Russia

https://icgcet.org/

6th International Conference on Recent Trends in Computer Science and Electronics (RTCSE®)

January 5-7, 2021, University of Hawaii, USA

https://rtcse.org/

Best wishes.

Prof Jason Levy, University of Hawaii, USA &

Dr. Bishwajeet Pandey, Gyancity Research Consultancy, India

Tel: +1-808-689-2492, Whatsapp: +39-3495603771, +91-9771149568

https://imces.tech/

https://icgcet.org/

https://rtcse.org/



4

Email: [email protected], [email protected], [email protected]

IMCES’2020 Schedule

2 June 2020

12:00-12:15 PM Every Participant will login to Skype

12:15-15:15 PM

(Indonesia Time)

Session 1 Presentations:

Chair: Prof Amit Kant Pandit, Shri Mata Vaishno Devi University, India

Skype_Id: Amitkantpandit_1

Location: Shri Mata Vaishno Devi University, India

Indian Time: 2 June 2020 10.45 AM-1.45 PM Paper Id: 1, 46, 51, 52, 53, 54, 55, 61,62,63,64,65,66,69,156,169, 171,172,179,180

3 June 2020

09:00-09:15 AM Every Participant will login to Skype

09:00-09:15 AM

Conference Welcome

by

Jason Levy and Bishwajeet Pandey

9:15-11:45 PM

(Indonesia Time)


Chair: Jason Levy, University of Hawaii

Skype_Id: jasonk.levy

Location: Room 105, University of Hawai'i, Manoa 2520 Correa Road, IT

Center, Honolulu, HI 96822

Paper Id: 49, 50, 68, 71, 77, 92, 93, 94, 95, 97, 102, 110,137,138,152

Hawaii Time: 2 June 2020 7.15 -9.45 PM

https://imces.tech/

mailto:[email protected]





5

12:15-14:00 PM Video Presentation on Youtube Channel

Paper Id: 168,

14:00-16:30 PM

(Indonesia Time)


Chair: Sri Chusri Haryanti, Universitas YARSI, Jakarta, Indonesia.

Skype_Id: SriChusri Haryanti

Location: Faculty of Information Technology, Universitas YARSI, Jakarta,

Indonesia.

Paper Id: 111,112,113,114,123,124,125,129,130,131,132,134,135,136

16:30-18:00 PM

(Indonesia Time) General Chair Prof Jason Levy will email a Presentation Certificate to

every participant

Registered Listener

Abdullah Alshmrani, United States Email: [email protected]

https://imces.tech/




6

Abstract of Paper Accepted in IMCES’2020

1 Power Efficient Control Unit for Green Communication

Bishwajeet Pandey1, Keshav Kumar1, Sri Chusri Haryanti2, Rajina R

Mohamed3, D. M. Akbar Hussian4.

1Centre of Energy Excellence, Gyancity Research Labs, Motihari, India, 2Faculty of Information Technology, Universitas Yarsi, Jakarta, Indonesia,

3Universiti Tenaga Nasional (UNITEN), Malaysia 4Department of Energy Technology, Aalborg University, Esbjerg, Denmark,

[email protected],[email protected], [email protected], [email protected], [email protected]

Abstract Nowadays people are getting more concerned towards the idea of green communication. In the electronic world as digitalization is growing the need for power efficient devices are in more demand. In this work we are making a power efficient Control Unit (CU) by interfacing it with different Virtex and Spartan family Field Programmable Gate Array (FPGA). This experiment is performed on Xilinx 14.1 ISE Design simulator. Dynamic power, quiescent power and total power of control unit with different FPGAs of Virtex and Spartan families is analysed on X Power analyser tool. The other chips power like clock power, signal power, input/output (I/O) power counts 0W of power in total power consumption. From the experiment it was concluded that the control unit when interfaced with Spartan 6 FPGA consumes the least amount of power and hence is regarded as the most power efficient device. Keywords: Control Unit, FPGA, Virtex, Spartan, Power.

https://imces.tech/







7


27 An automated system for traffic sign recognition using

convolutional neural network

Sanam Narejo, Shahnawaz Talpur, Madeha Memon, Amna Rahoo

Mehran University of Engineering & Technology, Jamshoro, (Pakistan).

Abstract

TSR (Traffic Sign Recognition) represents an important feature of advanced driver assistance system, contributing to the safety of the drivers, autonomous vehicles as well and to increase driving comfort. In today’s world road conditions drastically improved as compared with past decades. Obviously, vehicle’s speed increased. So, on driver’s point of view there might be chances of neglecting mandatory road signs while driving. This paper explores the system to helps the driver about recognition of road signs to avoid road accidents. TSR is challenging task, while its accuracy depends on two aspects: feature extractor and classifier. Current popular algorithms mainly deploy CNN (Convolutional Neural Network) to execute both feature extraction and classification. In this paper, we implement the traffic sign recognition by using CNN, the CNN will be trained by using the dataset of 43 different classes of traffic signs along with TensorFlow library. The results will show the 95% accuracy.

https://imces.tech/



8


46 Automatic Pizza Cutting Machine

Atif Saeed1, Saud Sattar2, Andrew Ferguson3

1Department of Mechatronic Engineering, SZABIST, Karachi, Pakistan. 2Electronics Engineering Management, University of York, United Kingdom.

3Strategic Project Manager/Principal, Careers & Placement, University of York, United Kingdom

[email protected], [email protected],[email protected]

ABSTRACT The objective of this research is to determine the need of an automated pizza cutting machine in food industry and to design a machine that would cut a pizza into even slices by a single press. The need of the product has been determined by the surveys that were collected from various pizza vendors. From the survey it was concluded that market will welcome the product as it would overcome several issues like unequal slice cut and lower productivity. This machine is designed to cut a pizza of any size in less than 30seconds; increasing the overall productivity. The pneumatic system and round cutting tools are used to create basic structure in this project to get the pizza cuts into even slices with better precision and accurate shape. The stress and motion analysis conducted as part of design procedure and their results are also discussed. KEYWORDS: Mechatronics System, Pizza Industry, Productivity, Sustainability, Reliability, CAD Simulations

https://imces.tech/





9


49 LVCMOS Based Design OF Energy Efficient RAM On FPGA

SHIKHA SEN, APURV RANA, SURYANSH DABAS

Gyancity Research Consultancy Pvt Ltd New Delhi, India [email protected], [email protected], [email protected]

Abstract In our proposed work, we are making our RAM to behave energy efficient by reducing the overall power usage by implementing it on FPGA. LVCMOS15 and LVCMOS25 have been used to observe the power reduction , which includes clock power ,logic power, signal power, i/o power, leakage power and Total power . Power reduction of about 61.4% is seen at the capacitance of 500pF by testing the RAM on LVCMOS25 and then in LVCMOS15 . Also the leakage power is comparatively much lower at -33 degree Celsius with the capacitance load of 1000pF in LVCMOS25. The FPGA is tested on different temperatures including standard room temperature of 25 degree celsius, -33 degree and 48.9degree celsius which is environmentally extreme temperature .The results are obtained by using Xilinx ISE 14.7 simulator with verilog hardware description language.

Key Words: LVCMOS, Energy Efficiency, computer hardware, RAM, FPGA,

Capacitance

https://imces.tech/



10


50 Validating the Optimum Tilt Angle for PV Modules in the Highveld of South Africa for the Summer Season

M C Lehloka1, A J Swart2 and P E Hertzog3

1Department of Electrical and Mining Engineering, University of South Africa, Christiaan de Wet Road and Pioneer Avenue, Florida, Roodeport, 1709, South Africa

2 Department of Electrical, Electronic and Computer Engineering, Central University of Technology, Private Bag X20539, Bloemfontein, 9300, South Africa

3 Department of Electrical, Electronic and Computer Engineering, Central University of Technology, Private Bag X20539, Bloemfontein, 9300, South Africa

[email protected], [email protected], [email protected]

Abstract Energy supply is a major problem in today’s world due to increase in demand,

depleting of fossil fuels and increase in global warming due to carbon emission. The need for an alternate, overall efficient and environment-friendly energy system has ascended globally. Photovoltaic (PV) systems can be used to harness solar energy that is considered to be one of the most promising alternative energy sources. However, its efficiency is affected not only by varying environmental conditions but also by the installation of its PV modules. The purpose of this paper is to empirically validate the optimum tilt for PV modules in the Highveld of South Africa. Three fixed-axis PV modules installed at optimum tilt angles of Latitude minus 10°, Latitude, and Latitude plus 10° serve as the basis of this study. These optimum tilt angles are utilised based on the recommendations by Heywood and Chinnery. A key recommendation is that PV modules should be mounted at Latitude minus 10° for the summertime period in the Highveld region of South Africa.

Keywords: PV module, LabVIEW, Latitude, Tilt angles.

https://imces.tech/



11


51 The Usage of Augmented Reality to Learn Kids Occupations Behaviour

1Syarilla Iryani A. Saany, 2Ehab Husam Alsheikh Saleh, *3Yousef A.Baker El-

Ebiary, 4M. Hafiz Yusoff, 5Julaily Aida Jusoh, 6Muhammad Wajdi Naim

1Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA, Malaysia, 2Ph.D. Candidate, Faculty of Informatics and Computing, UniSZA, Malaysia

*3Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia, 4Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,

5Dr., Faculty of Informatics and Computing, UniSZA, Malaysia, 6Candidate, Faculty of Informatics and Computing, UniSZA, Malaysia,

[email protected], [email protected], [email protected], [email protected], 046278 @putra.unisza.edu.my

Abstract Occupation of Kids Learning (AR) is an interactive smartphone application designed to provide learning attractive to users especially to children aged 4 to 8 years. This application is developed using a number of appropriate software and is able to integrate the latest technology of Augmented Reality (AR). Among Unity 3D - software for developing this application, Vuforia - a place where the marker database’s augmented reality is stored and Autodesk Maya – to create 3D models. The problems identified are these kids do not like it or get bored with the existing learning system because it only uses normal books only and there is no element that makes it interactive. With using this Augmented Reality technology for Occupation for Kids Learning, it will be more interactive applications to use by user or children. Keywords: Augmented Reality (AR), Electronic Learning, Mobile Application, Flash Cards, Kids learning.

https://imces.tech/







12


52 Archery Equipment Shop in Virtual Reality Environment (X-10 Shop in VR)

1Yousef A.Baker El-Ebiary, 2Salameh A. Mjlae, 3 Syarilla Iryani A. Saany, 4Julaily Aida Jusoh, *5M. Hafiz Yusoff, 6Muhamad Syafik Izwan

1Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,

2Lecturer, Prince Abdullah Bin Ghazi Faculty of IT, Balqa Applied University, Jordan, 3Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA, Malaysia,

4Dr., Faculty of Informatics and Computing, UniSZA, Malaysia, 5Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,

6Student, Faculty of Informatics and Computing, UniSZA, Malaysia, [email protected], [email protected], [email protected],


Abstract VR technology has begun entering the repertoir of tools used by all parties. Today, the sports goods business uses VR for visualization and sales. For example, VR is used as a promotional tool in selling goods to consumers and providing up-to-date information on the right prices and archery items. Very important, VR can help customers communicate better about the proposed platform. Therefore, the proposed application for the X-10 Store in Virtual Reality is recommended. The X-10 Shop is a shop to provide information and pricing for beginner users on archery tools and they can also learn about archery equipment before buying it. The main objective of this research is to develop applications, to test the use of this application. This app is a platform for users to create users who want to buy archery tools and easy tools to view information and prices of archery equipment without having to go to the store and waste time to get there. This involves the use of Unity application development software to generate X-10 Shop in Realita Maya.

Keywords: Virtual Reality, VR, Mobile based application, Computer Application, Electronic Shop, X-10 Shop.

https://imces.tech/








13


53 Using Augmented Reality for Recognizing the Hand Tools in Malaysian Primary School Curriculum

1Julaily Aida Jusoh, 2M. Hafiz Yusoff, *3Yousef A.Baker El-Ebiary, 4Syarilla

Iryani A. Saany, 5Ehab Husam Alsheikh Saleh, 6Muhamad Fikhrul Edham

1Dr., Faculty of Informatics and Computing, UniSZA, Malaysia,

2Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia, *3Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,

4Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA, Malaysia, 5Ph.D. Candidate, Faculty of Informatics and Computing, UniSZA, Malaysia



Abstract Type of Hand tool using Augmented Reality(AR) was developed for student from 1 to learn Kemahiran Hidup subject and learning more efficiently in school. Existing learning methods are changed by AR technologies and using smartphones. This app may be able to help student from 1 to learn the type of hand tool more interactive and fun. An addition, this application will use interactive 3-Dimensional (3D) objects, sound and display info so that students are interested in using this application. ADDIE method is divided into five main sections, namely the beginning of the analysis phases, design phases, development phases, implementation phases and evaluation phases. The use of the ADDIE method ensures that the development of the system runs smoothly and according to planning. The expected result following the development of the proposed project are the user friendly interface. Augmented reality with good interface in this application that will be safe to use by user. Besides that, effective result in getting information in using this mobile application. Keywords: Augmented Reality (AR), Mobile Application, Malaysian Education, Electronic Education

https://imces.tech/








14


54 The Use of Augmented Reality to Show the Rhetorical Miracle of the Fetal Development Stages According to the

Interpretation of the Holy Quran

1Syarilla Iryani A. Saany, 2Elsayed Mohamed Salem Salem Elawadi, 3Yasser

Mohamed Tarshany, 4M. Hafiz Yusoff, *5Yousef A.Baker El-Ebiary, 6Nur

Hikmah Binti Ismail

1Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA, Malaysia,

2Assoc. Prof. Dr., Faculty of Languages and Communication, UniSZA University, Malaysia, 3Assoc. Prof. Dr., Faculty of Islamic Scinces, MEDIU, Malaysia,

4Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia, *5Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,



Abstract

Fetal Growth based on Al Quran using Augmented Reality(AR) was developed for teenagers, adults and mothers to learn Fetal Growth based on Al Quran and learning more efficiently in school. Existing learning methods are changed by AR technologies and using smartphones. This app may be able to help people to learn the Fetal Growth based on Al Quran more interactive and fun. In addition, this application will use interactive 3-dimensional(3D) objects, sound and display info so that people are interested in using this application. ADDIE method is divided into five main sections, namely the beginning of the analysis phases, design phases, development phases, implementation phases and evaluation phases. The use of the ADDIE method ensures that the development of the system runs smoothly and according to planning. Keywords: Augmented Reality (AR), Mobile Application, Flash Cards, Fetal Growth, Holy Quran.

https://imces.tech/








15


55 Use Two-Dimensional Animation in The Mobile Application to Learn the Stories of Animals in The Holy Quran in Three

Languages

1Yousef A.Baker El-Ebiary, 2Elsayed Mohamed Salem Salem Elawadi, *3M. Hafiz

Yusoff, 4Syarilla Iryani A. Saany, 5Yasser Mohamed Tarshany, 6Nor Jannah

Binti Abdullah


2Assoc. Prof. Dr., Faculty of Languages and Communication, UniSZA University, Malaysia, *3Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,

4Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA, Malaysia, 5Assoc. Prof. Dr., Faculty of Islamic Scinces, MEDIU, Malaysia,

6Student, Faculty of Informatics and Computing, UniSZA, Malaysia,

[email protected], [email protected], [email protected], [email protected], [email protected], [email protected]

Abstract

This mobile application development project “The Mobile Learning Application of Educational Relate to Animal’s Name in Holy Quran” has developed its aims to facilitate its use and in line with today’s increasingly sophisticated technology. In producing this mobile phone application. Some objectives and goals are targeted. The main objectives are to analyze the advantages and disadvantages available on existing mobile phone applications, designing a better and more attractive interface from the previous mobile learning application and developing attractive and effective mobile learning application software to help children know about something new. Besides, this mobile learning app features various multimedia elements together with text in English, Arabic and Malay, video, audio and animation. Among the suggestions suggested to enhance and improve this app is that the animation produced should be more creative and attractive for the viewing of children and the buttons created to create interactivity should be more user-friendly. Keywords: Two-Dimensional (2D) Animation, Mobile Application, The Holy Quran, Electronic Learning.


https://imces.tech/








16

61 Context and building the semantics of the text linguistically and technically using semantic web

1Ebrahim Mohammed Ahmad Eldesoky, 2Abdu Ghani Bin Md Din, 3Mohamed

Ibrahim Hassan Othman, 4Omar Bin Md Din, 5 Mohd Azizul Rahman bin Zabidin, *6Yousef A.Baker El-Ebiary

1,2,3,5Dr., Faculty of Arabic Language, UniSHAMS University, Malaysia. 4Dr., Ex. Arabic Language Department, Prince Sattam Bin Abdulaziz University, KSA.

*6Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia, [email protected], [email protected], [email protected],


Abstract The semantic web is a new revolution in the world of the web where information and data become logically manageable by computer programs so that information and data are converted into a meaningful data network, "meaning that special computer programs can know what this data means. It serves a lot of fields and in this The search deals with its use with the semantics of the language, and on the one hand the language may refer to the single letter or the word or the single composition in a context and we find the text in a meaning, then if we go to the same letter or the same word or the composition itself in a different text and we find that the meaning of the letter or word or the composition It has differed accordingly The meaning of the text is corrupted, so what is the reason for this difference if there is a difference, so this research seeks to explain how the letter, word or syntax is different according to the context, and the research will follow the descriptive analytical approach, and is expected to reach a conclusion that the text is on the three levels of the letter or The word or structure, its meaning varies depending on the context. Keywords: Semantic Web, Information Technology (IT), Text Context, Building Text.

https://imces.tech/








17


62 The Adjustment of Arabic Words and The Problems of Its Digital Content On the Internet

1Abdu Ghani Bin Md Din, 2Ebrahim Mohammed Ahmad Eldesoky, 3Mohamed Ibrahim Hassan Othman, 4Omar Bin Md Din, 5Ibrahim BaBikir El Hag Abd el

Gadir, *6Yousef A.Baker El-Ebiary 1,2,3Dr., Faculty of Arabic Language, UniSHAMS University, Malaysia.

4Dr., Ex. Arabic Language Department, Prince Sattam Bin Abdulaziz University, KSA. 5Dr., Faculty of Arabic Language, UniSHAMS University

*6Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia, [email protected], [email protected], [email protected],


Abstract It is difficult for the non-Arabic speaking people to read the research without controlling the words, therefore this research seeks to suggest an easy way to control the words in Arabic writing so that the reader does not mistake and change the desired meaning, because the mistakes of the people in reading and speaking are many. This has gone beyond the emergence of mistakes among Arabs who provide various news and programs in the audio and visual media, as well as in official speeches in the museum. To Arab and international councils, in addition to that, researchers resort to translating content from their mother tongue into Arabic through some websites or applications available on smartphones, including the content available on the Internet and the problems facing the availability of this content in an optimal way. And it will pursue this research descriptive and analytical approach, who shall search a historical description of patterns of letters and origins, then described the project to facilitate tuning of Arabic words, and is expected to reach research to appropriate proposals if this proposal is adopted, this treatment, and brings together many people common mistakes scattered among intellectuals, students and others.

Keywords: Digital Content, The Internet, Arabic Language Adjustments, Electronic Problems, Arabic writing difficulties.


63 Use Decision Support System to Efficiently Select Suppliers

1Yousef A.Baker El-Ebiary, 2Salameh A. Mjlae, 3Waheeb Abu-Ulbeh, 4Ahmed Hassan Hassan, 5Samer Bamansoor, 6Syarilla Iryani A. Saany

https://imces.tech/








18


2Lecturer, Prince Abdullah Bin Ghazi Faculty of IT, Balqa Applied University, Jordan, 3Dr., Faculty of Information Technology, Palestine Ahliya University, Palestine 4Dr., Ajloun National University, Faculty of Information Technology, Jordan,

5Lecturer, Al-Madinah International University, Kuala Lumpur, Malaysia. And researcher, University of Aden, Aden, Yemen,

6Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA, Malaysia, [email protected], [email protected], [email protected],


Abstract In a very competitive and fast emerging IT and wireless technology need a company to move fast and it demands the company to have the correct decision support system in choosing suppliers. The right system helps company to gain useful and meaningful data in making the right decision of selecting the right suppliers which helps them to improve their performance and sustainable in the industry that they are involve in. In making the right decision of selecting suppliers the factors of efficiency and effectiveness of the decision support system used have to be concerned. In this paper, different selection methods considering their effectiveness and efficiency systems used in choosing suppliers is discussed. Keywords: Decision Support System (DSS), System Enterprise, Information Systems, Supplier selection, Business Sustainable.

https://imces.tech/








19


64 Effective and Efficient Knowledge Management System in The Enterprise System

1Syarilla Iryani A. Saany, 2Salameh A. Mjlae, 3Waheeb Abu-Ulbeh, 4Ahmed

Hassan Hassan, 5Samer Bamansoor, *6Yousef A.Baker El-Ebiary

1Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA, Malaysia,

2Lecturer, Prince Abdullah Bin Ghazi Faculty of IT, Balqa Applied University, Jordan, 33Dr., Faculty of Information Technology, Palestine Ahliya University, Palestine,

4Dr., Ajloun National University, Faculty of Information Technology, Jordan, 5Lecturer, Al-Madinah International University, Kuala Lumpur, Malaysia. And researcher, University of

Aden, Aden, Yemen, *6Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,

[email protected], [email protected],[email protected], [email protected], [email protected], [email protected]

Abstract

Nowadays, the turning up of the knowledge-based management system has benefited almost all sectors and industries in our country. It has become the main role in ensuring the organization's operations run smoothly along with the country's development. The effectiveness of the knowledge management system is said to be an analytical element for an organization that work on maintaining a strategic driven advantage. In knowledge management, the information and knowledge are managed, created and shared whereas they are essential in gaining the exact value of knowledge. The approach of developing the tool in a way to match the user habit instead of letting the user adapting themselves to meet their needs will give an extra advancement to the efficiency and effectiveness of the Knowledge Management System (KMS). This paper reviews the efficiency and effectiveness of the Knowledge Management System in an organization. The paper is able to demonstrate the importance of KMS in ensuring the effectiveness and efficiency of organizational performance through its survival and competitiveness. KMS relies on its process in order to be implemented successfully. The fundamental is to let people, processes, and technology communicate actively to influence knowledge. Keywords: Knowledge Management System (KMS), knowledge management, Enterprise System, Information Systems .


65 The Effectiveness of Management Information System in Decision-Making

https://imces.tech/







20

1Yousef A.Baker El-Ebiary, 2Salameh A. Mjlae, 3Waheeb Abu-Ulbeh, 4Ahmed

Hassan Hassan, 5Samer Bamansoor, 6Syarilla Iryani A. Saany


2Lecturer, Prince Abdullah Bin Ghazi Faculty of IT, Balqa Applied University, Jordan, 33Dr., Faculty of Information Technology, Palestine Ahliya University, Palestine,

4Dr., Ajloun National University, Faculty of Information Technology, Jordan, 5Lecturer, Al-Madinah International University, Kuala Lumpur, Malaysia. And researcher, University of

Aden, Aden, Yemen, 6Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA, Malaysia,


Abstract

Management Information System (MIS) is the use of information technology, people, and business processes to record, store and process data to produce data-driven information that helps managers to derive decisions for the organizations. The decision is consciously taken from a variety of alternatives and the consent of many is based on the goal of achieving the desired outcome. MIS can be defined as a collection of systems, hardware, procedures, and people that all work together to process, store, and produce information that is useful to the organization. It is an important system for every organization that needs to have to ensure they remain competitive in the market. However, not all MIS fulfil the requirements from stakeholders. Some have failed to do so due to several factors such as poor requirement design or improper training to the users. Therefore, in this study, the paper focus to identify the key criteria that contribute to effectiveness in developing the “fit” MIS based on previous studies. The criteria discussed in detail by hoping this find out will become major guidelines to create a good MIS. Keywords: Management Information System (MIS), Information Systems, Middle Management, Enterprise Systems, Decision-Making.


66 The Efficiency and Effectiveness of Leadership in Operational Management Level in Organization

1Seita Almandeel, 2Waheeb Abu-Ulbeh, 3Ahmed Hassan Hassan, *4Yousef

A.Baker El-Ebiary 5Samer Bamansoor, 6Syarilla Iryani A. Saany,

1Assoc. Prof. Dr., Faculty of Economics and Administration, King Abdulaziz University, Jeddah, Saudi Arabia

[email protected] 23Dr., Faculty of Information Technology, Palestine Ahliya University, Palestine,

https://imces.tech/








21

[email protected] 3Dr., Ajloun National University, Faculty of Information Technology, Jordan,

[email protected] *4Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,

[email protected] 5Lecturer, MEDIU, Kuala Lumpur, Malaysia. And researcher, University of Aden, Aden, Yemen,

[email protected] 6Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA, Malaysia,

[email protected]

ABSTRACT

Nowadays, the topic of Operational Management System in the operational level of organization are still widely discussed. This review paper aims to analyse the efficiency and effectiveness of Operational Management System in organization. The usage of Transaction processing systems (TPS) in operational management system is an information processing system for business transactions involving collection, modification and retrieval of all transaction data. TPS include in performance, Leadership, reliability and consistency which will be very much help in smoothing the organization’s work. The methodology used in this paper is to collect, analyse and evaluate papers. Moreover, the top popular issues consist of the Impact of strategic operational management, Impact of Operational Management Proficiency and Approach to staff behaviour in operational management perspective respectively. This study emphasized the impact of Operational Management in organizations as a topic for the growing of organizations in requiring operational management capabilities. Keyword: Transaction processing system (TPS), Information Systems, Leadership, Enterprise Systems, Operational Management


68 Cost-effective and innovative test jig for fishing-bait release mechanisms attached to drones

Pierre E Hertzog and James Swart Department of Electrical, Electronics and Computer Engineering

Central University of Technology [email protected]

Abstract Fishing-bait release mechanisms are used in conjunction with drones to drop bait at a specific fishing location. It is really a revolutionary technology to many fishermen. However, many of these release mechanisms have no real technical data associated with them. Therefore, the purpose of this paper is to present a cost-effective and innovative test jig that may be used to determine the reliability and consistency of operation of

https://imces.tech/



22

various fishing-bait release mechanisms. The main components of the system are a HX711 instrumentation amplifier, a load cell and an Arduino Mega microcontroller. The accuracy of the system was determined to be 99,879%. Reliability values for a Gannet Sport mechanism with a 0.55 mm Kingfisher line ranged from 599 g to 642 g, giving a maximum deviation of 43 g. The results provide evidence that the system is both reliable and valid. It is recommended to use it to clarify technical data regarding the weights at which different fishing-bait release mechanisms operate. Keywords: Arduino; load-cell; electronic measurements;

https://imces.tech/



23


69 The S-Commerce Usage and Acceptance Modelling in Malaysia

1Samer Bamansoor, 2Syarilla Iryani A. Saany, *3Yousef A.Baker El-Ebiary

1Ph.D. Candidate, Faculty of Informatics and Computing, UniSZA, Malaysia

2Assoc. Prof. Dr., Faculty of Informatics and Computing, UniSZA, Malaysia, *3Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,


Abstract The evolution of technology acceptance theories and models have started since the beginning of the 20th century and it is still evolving. This evolution is happened in different theoretical perspectives, such as: cognitive, affective, motivational, and behavioral intentions and reactions for individuals. Nowadays, understanding the reason of accepting or rejecting any new technology by users has become one of the most important areas in the IT field. The social media applications are benefited and enhanced the E-Commerce, Electronic Marketing (E-Marketing), and Electronic Shopping (E-Shopping) usage behaviors to get any information of any offered commodity in the easiest, fastest, and most familiar way, that will increase the retail profit as well. Social Commerce (S-Commerce) has become one of the most important fields and one of the fastest growing areas of the high technology sector development, especially in the trading and commercial environments. In this scope, it is presenting here the theories and models which were developed to study the acceptance by users and their adoption for new technology. this study adheres to the methodology of quantitative research, which offers a numerical measurement and analysis of the factors that determine adoption for samples 30 as a pilot study in Malaysia as a limit of this research specifically among 2 Malaysian Universities, that will lead to distribute the updated survey around 484 samples later. That results a high ratio of questionnaire validity and the effectiveness of the research hypothesis also found that the new model identifies the factors affecting S- Commerce usage behavior and continued usage intention, find the relationship between education and S- Commerce usage behavior and found such relationship between age and S- Commerce usage behavior. Keywords: E-Commerce, S-Commerce, Information systems, Electronic Enterprise.

https://imces.tech/





24


77


92 ENERGY HARVESTING USING KINETIC ENERGY OF VEHICLES

Mirsad Hyder Shah1, Gasim Othman Alandjani2, Maryam Asghar1

1DHA Suffa University. Karachi (Pakistan). 2Yanbu University College, Yanbu Industrial City (Kingdom of Saudi Arabia).


Abstract With the increasing global energy demand, clean and affordable sources of energy are being adopted over time. Road Power Generation (RPG) is thus an alternate to conventional electricity generation. RPG technologies generate electrical power from vehicles by harnessing their kinetic energy. The most common RPG technology is RPG by speed breaker mechanism. However, this paper will discuss the construction of a novel Electro-Mechanical system which can be employed on the surface of a road and thus can produce electricity of up to six kilowatts per day. A vehicle induces reciprocating linear motion into the RPG flip plates which is then converted to rotary motion via rack and pinion. This angular motion is converted to electricity via a PMDC generator which can be used to power street lights. This method of generating electricity is called RPG by flip plate mechanism or RPG by reciprocating linear motion. Keywords: Flip plate mechanism, Road power generation, Energy harvesting, Rack and Pinion, Reciprocating Linear Motion, Kinetic Energy of Vehicles.


https://imces.tech/





25

93 WIRELESS POWER TRANSFER VIA INDUCTIVE COUPLING

Mirsad Hyder Shah1, Nasser Hassan Abosaq2

1DHA Suffa University. Karachi (Pakistan). 2Yanbu University College, Yanbu Industrial City (Kingdom of Saudi Arabia).

[email protected], [email protected]

Abstract The concept of transferring electrical power to a load wirelessly is an intimidating and a challenging idea. The genius of powering systems wirelessly has pulled the curtains to a new world. In the 19th century, Nikola developed ‘Tesla Tower’ in hope to transfer power wirelessly. Since then, the world is trying hard to say goodbye to wires. WPT using Inductive Coupling which falls under the domain of NFWPT, uses a transmitter coil to transmit power to the receiver coil via a magnetic field. Inductive coupling is an efficient way to transmit power through short distances and making its way in smartphones and the health industry. Electric vehicle charging stations are also trending thanks to wireless power transfer. This paper discusses the theoretical foundation of Inductive coupling and also presents results of an experimental work done on WPT via Inductive Coupling. In the process above, an efficiency of 72% was achieved.

Keywords: Wireless Power Transfer, Inductive Coupling,

https://imces.tech/





26


94 Comparative Analysis of Supervised Machine Learning algorithms for heart disease detection

1Hector Huapaya, 1Ciro Rodriguez, 2Doris Esenarro

1National University Mayor de San Marcos 2National University Federico Villarreal


Abstract This paper describes the most prominent algorithms of Supervised Machine

Learning (SML), their characteristics, and comparatives in the way of treating data. The Heart Disease dataset obtained from Kaggle was used to determine and test its highest percentage of accuracy. To achieve the objective, Python sklearn libraries were used to implement the selected algorithms, evaluate and determine which algorithm is the one that obtains the best results, applying decision tree algorithms achieved the best prediction results.

Keywords: supervised machine learning, heart disease, decision tree algorithms,

prediction

https://imces.tech/




27


95 AC/DC Critical Conduction Mode Buck-Boost Converter with Unity Power Factor

A. Hakeem Memon, Fazul M. Noonari, Zubair A. Memon, Ahmar Farooque, Mohammad Aslam Uqaili

IICT, Mehran UET, Jamshoro, Sindh, Pakistan

[email protected], [email protected], [email protected], [email protected], [email protected]

Abstract

The buck-boost converter operating in critical conduction mode (CRM) is commonly utilized in various applications because of many advantages like protection against short circuit, minimum component count, low operating duct-cycle, and low voltage on MOSFETs. However, its input power factor (PF) is not high while operating in constant on-time control. To attain unity PF for universal input voltage range, a new control scheme of variable on-time control (VOTC) is proposed in this paper. The VOTC can be implemented by modulating the turn-on time of the buck-boost switch. The working principle and performance comparison of the converter is discussed with both types of control scheme. The input PF the converter is high in case of VOTC than the COTC. Simulation results are presented to verify the effectiveness of the proposed control strategy).

Keywords: Buck-boost converter, power factor (PF), critical conduction mode (CRM)

https://imces.tech/



28


97 Implementing model applied to a virtualized Data Center based on open source projects

Andy Reyes Vargas1, Ciro Rodriguez2, Alex Pacheco3, Doris Esenarro2 1Open Nova IT Consulting, Peru

2National University Federico Villarreal, Peru 3Universidad Nacional de Cañete, Peru

[email protected], [email protected], [email protected], [email protected]

Abstract

This research aims to demonstrate that the proposed implementation model allows the deployment of a virtualized data center based on four open-source projects (identities, virtualization, storage, and platform) integrated at a very high level. The main contribution of the model is to simplify the process of implementation of the four projects that provide independent documentation of each other. The four components meet a checklist of requirements given by the industry, such as scalability, high availability, security, and manageability. A layered architecture complements the model, each layer implements key functionalities. The result is a data center deployed with less complexity, reducing implementation time and the cost to more than 40% by not incurring licensing costs but of renewable subscriptions annually. This deployment meets the requirements of organizations in the same way as proprietary solutions do. The model allows reusing servers and other components available in the organization to implement an open architecture, in addition to proposing the use of software-based and non-hardware technologies, giving way to future more specialized investigations of these software-based components.

. Keywords: virtualization, storage, data center, open source, software-based.

https://imces.tech/







29


102 Algorithmic efficiency indicator for the optimization of route size

1Ciro Rodriguez, 1Miguel Sifuentes, 2Freddy Kaseng, 2Pedro Lezama

1National University Mayor de San Marcos 2National University Federico Villarreal


Abstract

In software development, sometimes experienced programmers have difficulty determining before performing their tests, which algorithm will work best to solve a particular problem, and the answer to the question will always depend on the type of problem and nature of the data to be used, in this situation, it is necessary to identify which indicator is the most useful for a specific type of problem and especially in route optimization. Currently, there are techniques and algorithms used in Artificial Intelligence, which, however, cannot display their potential without a well-defined data set. The paper seeks to explain and propose an algorithm selection indicator to build a consistent data set, given the lack of availability of data that allows the best route size decision to be made.

Keywords: software development, algorithm efficiency, indicator, route size

https://imces.tech/






30


110 Software testing of Information Systems in Peruvian public organizations

Elizabeth Mendoza, Consuelo Espino, Ciro Rodriguez, Alex Pacheco Postgraduate School of the National University Federico Villarreal


Abstract To have a well-defined process for software tests on computer systems is necessary

to ensure the implementation of each system requirement as tested for conformity, which implies a double effort by the staff of development and an additional cost in system maintenance. The objective of this paper is to describe the importance of the software testing process and establishes guidelines to regulate activities and tasks during the development and maintenance of IT systems in the IT areas to confirm that the integrated software product meets the requirements defined, the Peruvian Technical Standard NTP-ISO: 122017: 2016 “Software and Systems Engineering. Software life cycle processes” and the NTP-ISO / IEC 27001 Information Technology Security techniques.Information security management systems, which cover the Life cycle support process, system quality tests, and security in the development and support processes. The key in the proposed model is the definition of roles and responsibilities, the activities of each sub-process, and the use of control templates, which has allowed to reduce failures in systems already in production.

Keywords: software testing, information systems, technical standard ISO, software

maintenance

https://imces.tech/



31


111 Proposal for a sustainable infrastructure design (Ecolodge) in the Quichas town, Perú.

Ciro Rodriguez1 ,Doris Esenarro 2, Pilar Ccorimanya3, Fabiana Flores4, Carmen Aylas5 and Jessica Lagos6

Specialized Institute Ecosystems and Natural Resources Research (INERN) 1,2,3,4,5 University Cesar Vallejos. Lima, Perú 6

[email protected], [email protected], [email protected], [email protected],,[email protected],[email protected]

Abstract Ecotourism is an alternative to social-economic development, especially in places

where biodiversity is abundant, and that is why viable and sustainable alternatives must be generated for its realization. The application of a bioclimatic architecture is proposed to generate the least possible negative impact. Sustainable ecotourism principles and the use of biodegradable materials in the area that harmonize with nature will be taken into account to generate a good low impact ecotourism practice to promote the socio-economic, environmental and cultural development of the inhabitants. This proposal for a sustainable infrastructure design (ecolodge) is based on the collection of information from the people of Quichas. It uses the adobe in the construction and thermal insulation in the ceilings; it has a recreation area and uses renewable energy sources taking advantage of the climate of the area.

Keywords: ecotourism, sustainable, bioclimatic architecture, biodegradable

materials, ecolodge, renewable energy.

https://imces.tech/



32


112 Cable car with water collection for afforestation of the solar hill in Chorrillos, Perú

Doris Esenarro1, Ciro Rodriguez2, Cristian Aquije3, Nicasio Obregon4, Luis Anicama5 and Cesar Arguedas6

Specialized Institute for Ecosystems and Natural Resources Research (INERN) 1,2 National University Federico Villarreal. Lima, Perú 3,4,5,6

[email protected], [email protected] [email protected], [email protected], ,[email protected],

[email protected]

Abstract

The present investigation raises a perspective regarding the implementation of the morro solar phone - swamps of villa in chorrillos, incorporated with a trapper system, of 12L of water production per day, to look for viable alternatives that meet the demand for water required for afforestation of the area and thereby achieve a scenario that can be used as a frame of reference in the reduction of water stress in other districts of Lima Lima, the second-largest city built on a desert, has a water deficit of 5, 3 m ^ 3 / s and about 7.7% of homes do not have potable water service. This research includes the analysis of the climatological information and the evaluation of technical variables to prepare the telephone proposal. The project increases the reception capacity of tourism and increases the tourist offer, benefiting local communities economically, improving environmental and tourist conditions.

Keywords: Cable car, water collection, afforestation of the solar hill, Chorrillos, Perú

https://imces.tech/



33


113 Quality Model for Peruvian Microenterprises of a Software Product Factory

Rembrandt Ubalde, Ciro Rodriguez, Ivan Petrlik, Doris Esenarro, Pedro Lezama, Julio Sotomayor

Postgraduate School of the National University Federico Villarreal [email protected], [email protected], [email protected], [email protected] ,


Abstract

Microenterprises represent around 90% in the software industry in Peru and a similar percentage in Latin America and worldwide. They are characterized by the use of quality models of both the process and the product. In this descriptive research, t the proposed software quality model applied to a microenterprise is observed, which shows how the model generates an improvement in the software quality processes in the projects for its clients that support the effectiveness of the model. Expert opinions of professionals have been included. An evaluation of the impact on the improvement of software quality will be done; as a result, to use the proposed model by a Peruvian micro-company that produces software: the evaluation was carried out through the application of two international models in the assessment of software test management processes

Keywords: software quality, process control, microenterprises of software, software

testing, product quality, ISO/IEC 29110, very small entity (VSE).

https://imces.tech/



34


114 Aggregated Model for Tumor Identification and 3D Reconstruction of Lung using CT-Scan

Syed Abbas Ali1, Nazish Tariq2, Sallar Khan3, Asif Raza3, Syed Muhammad Fazal-ul-Karim 3, Muhammad Rahil Usman3

1N.E.D University of Engineering and Technology, Karachi, Pakistan 2Dow University of Health and Sciences, Karachi, Pakistan

3Sir Syed University of Engineering and Technology, Karachi, Pakistan [email protected], [email protected], [email protected],


Abstract

This paper facilitates radiologists in diagnosis of lung tumor and provides with a probability to differentiate between the types of tumor through automated analysis and increase in accuracy. The system is aggregated model for tumor identification and 3D reconstruction of lung using (computed Tomography) CT-scan images in Digital Imaging and Communications in Medicine (DICOM) format to identify the lung tumor (Benign or Malignant) using learning algorithm. The proposed system is capable to reconstruct the 3D model of lung tumor using CT-scan medical images and identify tumor (Benign or Malignant) including location of tumor (Attached to wall or parenchyma) with significant accuracy. The proposed diagnostic software provides significant results with bright CT scans to identify lungs tissue with different orientations by rotating it and reduces the enormous false positive rate by increasing the efficiency and accuracy of the diagnostic procedure. Whereas, CT-scan image is below required brightness or if CT-scan is done in a dark room than the module does not shows considerable results of segmentation. The proposed computer aided diagnosis can help the radiologists to detect tumor at early stage, decrease the enormous false positive rate, and the overall cost of the diagnostic procedure; thus, bringing windfall benefits in the field of medical imaging.

Keywords: Medical Imaging, Image Processing, Lung Tumor, Machine learning.

https://imces.tech/







35


123 Proposal System "Queen Uruapana" Design adapted to Change Climate, for the Handling of Queen Bee (Apis

mellifera) in Andahuaylas, Perú

Wilber Quispe1, Doris Esenarro2, Ciro Rodriguez3, Melchor Dolmos4 and Ronald Puerta5

1,2,3Specialized Institute for Ecosystems and Natural Resources Research (INERN) 4,5Postgraduate school of the National University Federico Villarreal, Lima, Perú


Abstract The research proposes the design of a “Queen-Uruapana” system for the

management and transfer of the queen bee in different areas of life in the province of Andahuaylas of the Apurímac region - Peru. This system optimizes proper handling and transport of the queen bee to ensure the continuity of the beekeeping population through oviposition. The experiment was aimed at calculating transport mortality and acceptance in the new hive. A sample of 90 fertile queen bees of the Italian breed was taken, distributed in 3 transport models of 30 individuals in each: Benton cages, HDPE plastic cages (High-Density Polyethylene) and the proposed Queen-Uruapana cage system designed in a way horizontal cylindrical 8 cm long, 2 cm in diameter, 10 mm. of the hole for entry and exit of the queen bee with a metal mesh of 0.20 mm. of a hole. The results obtained from transport mortality were: 26.6% Benton cage, with 16.6% HDPE cage and 3.6% in Queen-Uruapana, reducing mortality, the results obtained from acceptance in the new hive were: 12% Benton cage, 3.4% HDPE cage and 96.4% in Queen-Uruapana, increasing recognition in the new colonies.

Keywords: Queen bee, transport, beekeeping, cage, climate change

https://imces.tech/



36


124 Automated Logistic Systems: Needs and Implementation

Abbas Shabbir Ezzy1, Farhan Zafar Khan2, Moiz Akram1,Janib Agha1, Atif

Saeed1 1 Shaheed Zulfiqar Ali Bhutto Institute of Science and Technology Karachi, Pakistan

2Senior R&D Engineer, Mywater PVT. Ltd, Karachi, Pakistan [email protected], [email protected], [email protected],


ABSTRACT In this paper, a solution to the problem of warehouse automation for transferring goods is discussed. To meet the demands of large scale material movement in warehouses, an automated system is proposed in lieu of a manual workforce to automate the warehouse picking process using an Automated Guided Vehicle (AGV). Such a vehicle can operate in an industrial setting with minimal human intervention. The system is designed such that the robot can operate on a known ‘map’ laid out on the warehouse floor. When starting and ending coordinates are provided, it can calculate the shortest path to its destination and guide itself along the path avoiding obstacles. The system proposed is a prototype of a large-scale system and demonstrates proof of concept of the overall AGV system for warehouse management. The document is centered on developing the hardware model of automatic guide vehicle (AGV) system and group it with metal detection detector. The system performance is measured in a straight-line movement and once the robot turns at specific degrees. A metal track was built via metal strips and was then detected by the proximity sensors. This is a cheap process and an alternative to magnetic strip and infrared sensors. This process is also very robust and can withstand the demands of an industrial setting. Furthermore, control software was implemented using Robot Operating System (ROS) and interfacing for all the sensors was done using python scripts. Central processing was carried out for the data from all sensors and movement decisions were made based on the status of the sensors. Through this project, the concept of a small scale AGV produced using locally available materials, was proven. All of the objectives for this project were met successfully and the product performed according to its intended design criteria. KEYWORDS: Industry 4.0, Automated Systems, Mechatronics, Productivity, Shortest Path, Localization


125 Mitigation of greenhouse gases (CO2) through the use of the hybrid engine (Hydrogen fuel)

https://imces.tech/







37

Doris Esenarro1 Ciro Rodriguez2, Oswaldo Alfaro3, Pervis Paredes4, and Pedro Amaya5

1,2,5 Specialized Institute for Ecosystems and Natural Resources Research (INERN) 3,4Federico Villarreal National University, Lima, Perú.

[email protected] and [email protected], [email protected], [email protected], [email protected]

Abstract This research paper proposes a hybrid engine (Hydrogen fuel) as an alternative to using clean energy, aimed at lower fossil fuel consumption, reducing the use of gasoline, reduce greenhouse gas emissions to the atmosphere and mitigate air pollution and global warming [1]. The analysis is based on random samples of carburetor-engine vehicles, which have a low complexity of the engine, taking the levels of CO2 and hydrocarbons as measurements, with the objective of determining the performance of the use of hydrogen in the vehicle [2]. The engines of vehicles in Lima are not prepared for this type of fuel combination, so this experimental research required the adaptation of the vehicle's operating system and the installation of a Hydro Assist Full Cell kit, that means it became a Hybrid engine (Hydrogen - Gasoline); to, finally, evaluate and examine the effects it produces on the environment and the economy [3].

https://imces.tech/



38


129 Classification and Characterization of the Sustainable Wetland Bello Horizonte

Doris Esenarro1, Ciro Rodriguez2, Karen Huachaca3, Betsy Cachay4 and Carmen Aylas5

Specialized Institute Ecosystems and Natural Resources Research (INERN) 1,2,5

National University Federico Villarreal 3,4 [email protected], [email protected], [email protected], [email protected],

[email protected]

Abstract

This research seeks to generate the classification and characterization of the sustainable wetland Bello Horizonte according to the Ramsar Convention, due to the information gaps it presents, is used satellite images of the Google Earth Pro, are analyzed and overlap of the study district geographical layers, identifying vegetation cover, land use, hydrology, ecosystems, and climates using geographic information systems. The benefits for the promotion of its conservation as a natural resource and fragile ecosystem could be reached with more research and potentization in a sustainable way, such as the implementation of clean technologies for its conservation, maintenance, recovery, and income generation as a future place with great tourism potential, according to Peruvian National Forestry and Wildlife Authority (SERFOR) and the Peruvian Ministry of Environment (MINAM), and that provides ecosystem services to the populations, the main one being the provision of water in a coastal and desert zone, it is the habitat of different species of flora and fauna; the methodology applied is based on the collection of field information and the systematization of data through a geographic information system.

Keywords: Classification, characterization, wetland, GIS, clean technology, ecosystem, sustainability.

https://imces.tech/



39


130

An interpretive trail for the sustainable development of ecotourism in Pachangara - Oyón, Perú

Doris Esenarro1, Ciro Rodriguez2, Ángel Maldonado3, Carmen Aylas4 and

Jessica Lagos5

Specialized Institute Ecosystems and Natural Resources Research (INERN) 1,2,3,4

University Cesar Vallejos. Lima, Perú 5

[email protected], [email protected] [email protected], [email protected], [email protected]

Abstract

The interpretive-trail for sustainable ecotourism development connects the set of water resources in Pachangara and Oyón districts, as well as the set of its tourist resources (cultural heritage as archaeological complexes and rural communities’ areas) for their assessment and interpretation; sets information to treat about touristic parades, attention schedule, interpretive panels, signage, and resting places. Pachangara and Oyon districts are situated in the of Oyón province, in an area where Huaura River and Paton lagoon converges. This area has geographical features that allow the convergence of several water resources (high Andean lagoons, thermal pools, natural waterfalls, among others), is located in the Churin Valley where the Huaura river and its several tributaries supplies water service to the peasant communities that comprise it, giving unity to the valley and identity to the population. The constructions, in which clean technologies will be applied, will be made with biodegradable materials and available in the area to minimize impacts on the environment.

Keywords: interpretive trail, ecotourism, sustainable, water resources

https://imces.tech/



40


131 The Use of Modern Technology in The Semantic Allocation in Terms of Worship

Mohd 4Ummu Hani binti Abas, 3Omar bin Md Din, 2Abdul Ghani Bin Md Din, 1

Ebiary-Yousef A.Baker El*6Mohd Zaki bin Masoh, 5Syauqi bin Arshad,

1Dr., Faculty of Arabic Language, UniSHAMS University, Malaysia.

2Dr., Ex. Arabic Language Department, College of Education, Prince Sattam Bin Abdulaziz University, KSA.

3Dr., Faculty of Arabic Language, UniSHAMS University, Malaysia. 4Faculty of Arabic Language, UniSHAMS University, Malaysia.

5Faculty of Arabic Language, UniSHAMS University *6Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,

[email protected], [email protected],[email protected], [email protected], [email protected], [email protected]

Abstract In the framework of informatics, the importance of processing Arabic through computers is increasing, so that we can keep up with the riders of civilization. And since the computer was born in a language other than Arabic - it is an English-born - the computer technology and information systems have taken the English language as its basis. This English foundation imposed technical restrictions on other languages, and the greater the contrast between English and other languages, the greater the severity of these restrictions. The Arabic language and the English language from the computer point of view represent the opposite sides, hence the difficult obstacles to computerization of the computer and the language barrier has become one of the most difficult barriers for the Arab user. The Arabs have succeeded in Arabizing part of the computer at the level of the written language, but the matter of the spoken language still needs a long way to be Arabized. When a Muslim uses in his daily and periodic worship a set of words and words related to his worship, he may not consider much about the meanings of those worship, and he does not know where its linguistic origins are derived, and how the linguistic significance has shifted from that general or multiple linguistic origin to that meaning that it ended in the era Islamic; this research seeks to clarify the meanings of some of the terms related to acts of worship in Islamic law, and the origins from which they are derived. Keywords: Informatics; Information Technology; Semantic Allocation; Worship.

https://imces.tech/







41


132 Computer Etiquette and Its Role in Organizing Peaceful Coexistence

Shehata Hafez 3Abdul Ghani Bin Md Din, 2Rabie Ibrahim Mohamed Hassan, 1

Sha’aban ‘Abdel 5Mohamed Hamed Mohamed Said, 4Mohamed El Sheikh, Ebiary-Yousef A.Baker El6Hamid Refae Mohamed, *

Quran, UniSHAMS University, Malaysia-Dr.Faculty of Usuludin and Sains al1

Quran, UniSHAMS University, Malaysia -ludin and Sains alPhD student Faculty of Usu2 Quran, UniSHAMS University, Mala-Dr.Faculty of Usuludin and Sains al3

Quran, UniSHAMS University, Malaysia -Dr.Faculty of Usuludin and Sains al4

Quran, UniSHAMS University, Malaysia -Dr.Faculty of Usuludin and Sains al5 Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,6* [email protected], [email protected], [email protected], [email protected], [email protected], [email protected]

Abstract

Information and Communication Technology (ICT) ethical issues and the way Islam provides solutions to such issues with the emphasis Islam puts on acquiring and disseminating knowledge is discussed, including how the Qalam, (Pen) is gradually being replaced by computer systems in spreading knowledge. This is followed by an overview of philosophical questions concerning computer science. This research aims to correct misconceptions about the relationship of Muslims with others, and provide a practical model for coexistence through the looks of the honorable year, and the biography of the Prophet, may God bless him and grant him peace, and the problem of this research lies in misconceptions about the relationship of Muslims with others, internally and externally, and the importance of this research is highlighted in Correcting these concepts of the relationship of Muslims with others internally and externally, and highlighting the meaning of peaceful coexistence between Muslims and others through consideration of the honorable year, and the practical application of the honorable year, which is represented by his fragrant biography, and I have relied in this research on the inductive approach to tracking the texts of the year and events of the biography In which the manifestations of peaceful coexistence, its foundations and controls are manifested, then the analytical method in analyzing and discussing research issues, then the deductive approach to know the correct approach to the relationship of Muslims with others, and one of the most important results that we have reached is that the origin in human relations is that they are based on acquaintance, not repudiation, and on cooperation Not fighting, on peace, not on war. Keywords: ICT, Peaceful Coexistence, Islamic Sunnah, Minorities.


https://imces.tech/



42

133 Bayesian Model to Determine Genealogical Links of Family

Descendants

Ciro Rodriguez1, Pedro Lezama2, Freddy Kaseng3, Danilo Chávez4,

1,2,3National University Federico Villarreal, Lima, Peru 4,5National Register of Identification and Civil Status RENIEC

[email protected], [email protected], [email protected] [email protected],

[email protected],

Abstract

Knowing our family ancestry and descendant is essential since we are the result of

generations that have transmitted lives and experiences over time; however, today, it is

also of great help in genetics, health, and safety, among other fields. The research shows

the development of a model for the genealogical linking of citizens by a descendant,

using Bayesian methods with machine learning algorithms, processing data from

structured sources of civil registries, and identification of Peru as RENIEC. The model

verifies the relationship and identity of citizens' links by determining their descent by

integrating and analyzing incomplete, incorrect, inaccurate, and irrelevant data,

achieving precision with an approximation of 95.87% of the genealogical links.

Keywords: Ancestry, descendant, genealogical linkage, machine learning, Bayesian

networks.

https://imces.tech/








43


134 Technological Proposal of an LTE Network Simulator with Smart Meters

Alex Pacheco1, Orlando Reyes 1, Andy Reyes2, Consuelo Espino3, Cesar Cardenas1, , Elizabeth Mendoza4

1Cañete National University 2Open Nova IT Consulting

3Federico Villareal National University 4Union Peruvian University


Abstract This research aimed to implement a simulator to model an LTE mobile

communication network for advanced metering infrastructure in smart power grids. It started from the need to know if LTE networks can cohabit and converge with smart electric meters, ensuring that both have their own mobility characteristics. The construction of a simulator with static nodes was designed in three stages: construction and configuration, creation of the base model and design of the advanced model of the simulator. It was evident that the TNL -110 dBm parameter configuration shows a better coverage at 87.22%, PDR performance of 99.7% and Throughput above 1200 bps. The implementation of the simulator generates greater efficiency and reliability in the provision of mobile services with smart meters from the generation stage to distribution, which transcends benefits for the electricity grid company and the final consumer.

Keywords: Smart Cities simulation, Smart meter, LTE network, Cañete.

https://imces.tech/








44


135 Classification Algorithm Based on Machine Learning to Optimize Athletes Talent Detection

Bryam Soto1, Hugo Vega2, Yudi Guzmán3, Ciro Rodriguez4, Daniel Quinto5 National University Mayor de San Marcos


Abstract

The objective of this research is to automate the process of detecting youth athletic talent using a classification algorithm based on Machine Learning in a mobile application. The research addresses the problem of detecting talented athletes of young people aged between 6 and 18, which is deficient due to the complexity and amount of information that is processed to classify an athlete in the Academy in an accurate and timely manner in the corresponding discipline. “La Academia del IPD” is the massive support program in sport of the Peruvian Sports Institute, which seeks to promote sports activity and the training of sports talents.

Keywords: Classification algorithm, Machine Learning, mobile application,

automation, talent.

https://imces.tech/



45


136 Business Intelligence Governance Model to improve the Quality Management System of careers at the University

Erick Flores1, Jesús Ocaña2, Yvett Gonzales3, Ciro Rodriguez4

1,2,3National University Santiago Antunez de Mayolo, 4National University Federico Villarreal

[email protected], [email protected], [email protected] [email protected]

Abstract Universities and organizations require having clear and precise information to generate knowledge and make decisions that help to stay current in the market, or even better, achieve and sustain the current competitive advantage; and at a level of detail, monitor the key performance indicators of the processes, for continuous improvement. For this, it is necessary to have concrete solutions, such as the strategic application of Business Intelligence, that contribute to the decision-making process of the actors, under a synergy supported by structures, regulations, and tools (in our case Digital Technologies). These described facts frame the proposal of this article and whose objective is to demonstrate the effectiveness of the Business Intelligence Governance Model to improve the Quality Management System in the University's professional careers, carried out under a quantitative approach, experimental type, predictive level and quasi-experimental design of two non-equivalent groups and where the contribution is highlighted in the proposed Model, Architecture of the model, Engineering of the solution and the perspective of the solution, supported by an improvement of about 22 % compared to how it had been working previously.

Keywords: Business intelligence, Governance Model, Quality Management

System, University

https://imces.tech/



46


137 The Role of Modern Technologies in Embodying the Graphic Paradox and its

Impact on Artistic Construction

1Mohamed Rady Mohamed Elpaz Elsheakh, 2Elsayed Makki Elbishr Ali

Hassan, 3Usama Elsayed Mohamed, 4Mohammed Abdulaziz Mohammed

Ahmed Eltigani, 5LI Tinglin, *6Yousef A.Baker El-Ebiary

1Dr., Senior Lecturer, Faculty of Arabic language, University Sultan Abdulhalim, Malaysia

2Dr., Faculty of Languages and Communication, Sultan Idris University, Malaysia, 3Dr., Senior Lecturer, Kull.Bahasa Arab, Universiti Islam Antarabangsa Sultan Abdulhamid,

Malaysia 4Ass. Prof. Dr., Faculty of Languages & Communication, Sultan Idris University, Malaysia,

5Dr., Faculty of languages and communication, Sultan Idris Education University, Malaysia,

*6Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,


Abstract

The educational systems all over the world face many challenges that started with the advent of the information network era (Internet) in the mid-nineties of the last century. These challenges, which came in conjunction with the information revolution and the rapid growth in the capabilities of information and communication technology, include a variety of challenges, including political, economic, social, cultural and educational. Many countries have rushed to develop plans to reform their educational systems in order to prepare learners for the requirements of life and work in the third millennium, through the optimal investment of information technology capabilities. These reforms are therefore technology-oriented and based on contemporary trends in educational thought with the aim of bringing about a fundamental shift in the components of the educational system that enables learners to master computing, communication, critical thinking, self-directed learning and self-directed learning and work in a team, which are indispensable skills for the individual in Third Millennium. The graphic paradox is a modern artistic technique, employed by the modern creator, and counted it as one of the main pillars in building his poem.

Keywords: Modern Technologies, ICT, Artistic Construction, Poem of Amal Donqol.


https://imces.tech/









47

138 The Influence of Multimedia in Explaining the Creations of Qur'anic Stories

1Mohamed Rady Mohamed Elpaz Elsheakh, 2Elsayed Makki Elbishr Ali

Hassan, 3Mohammed Abdulaziz Mohammed Ahmed Eltigani, 4Usama Elsayed

Mohamed, 5LI Tinglin, *6Yousef A.Baker El-Ebiary

1Dr., Senior Lecturer, Faculty of Arabic language, University Sultan Abdulhalim, Malaysia

2Dr., Faculty of Languages and Communication, Sultan Idris University, Malaysia, 3Ass. Prof. Dr., Faculty of Languages & Communication, Sultan Idris University, Malaysia,

4Dr., Senior Lecturer, Kull.Bahasa Arab, Universiti Islam Antarabangsa Sultan Abdulhamid,

Malaysia

Dr., Faculty of languages and communication, Sultan Idris Education University, Mal 5

*6Assoc. Prof. Ts. Dr., Faculty of Informatics and Computing, UniSZA University, Malaysia,


Abstract

the teacher focuses heavily on the practical part, and encourages students to perform tasks related to creating multimedia of all kinds, from taking pictures, producing visual clips, and fixed and mobile informational design while directing the student to good planning before starting any work ... and focus on making the scenario, even in a form Simple until the student reaches to achieve the goal of producing such media. There are many differences between the story in the Holy Qur’an with all its frameworks and rules that control its course through the Quranic text, and the story outside the Quranic text or the creative story whose course controls the frameworks of modern literary criticism and its theories, so this research seeks to find the differences between the story in the Qur’an text with all What it includes from the arts of storytelling, and between the story and the human creative concept in terms of methods of dealing with various topics, methods of developing solutions and the semantic effect of the recipients of the two texts. It is superior to the human story than the semantical and reformative effects of the recipient. Keywords: ICT Influence, Multimedia, Qur'anic Stories, E-Learning.


152 Data Mart Design to Improve the Decision-Making Process of the After-Sales Service

https://imces.tech/









48

Junior Sánchez 1, Hugo Vega2, Yudi Guzmán3, Ciro Rodriguez4, Daniel Quinto5 National University Mayor de San Marcos


Abstract

Companies are currently looking for ways to maintain and get new customers, one of the strategies is to maintain customer loyalty to the brand, product or service, which is known as loyalty; technological advances and social media use facilitate this. The research proposes the development of a Data Mart that allows the extraction of information from different sources, stores only the required information, eliminates those data that hinder the analysis and generates key reports and indicators that provide support to the process of decision-making and to respond quickly and efficiently to customer inquiries, requests or complaints. For the research, the Ralph Kimball methodology was used, due to the focus on the functional after-sales area of the company, dividing the life cycle by stages, where each stages was evaluated and corrected promptly from planning to maintenance and growth of the Data Warehouse. As a result, it was possible to improve the obtaining of useful information for the business area by selecting the critical value data using an OLAP data model.

Keywords: Data Mart, Ralph Kimball methodology, Data Warehouse, Business

Intelligence, OLAP.

https://imces.tech/



49


167 Temporary Variability of Rain in Pedregal Gorge due to the Effects of Climate Change, Lima – Perú

Luis Metzger1, Doris Esenarro2, Ciro Rodriguez3, Oswaldo Alfaro 4, Pervis

Paredes5

1 San Marcos National University, Lima, Perú

2,3 Specialized Institute for Ecosystems and Natural Resources Research (INERN) 4,5Federico Villarreal National University, Lima, Peru.

[email protected], [email protected], [email protected]@unfv.edu.pe, and [email protected]

Abstract

The climate is an essential factor in the sustainable and economic development of a country; its study helps to classify the different types of environments to better plan economic and productive activities. The objective of this study is to analyze the information of precipitation in Pedregal Ravine between the years 1980 and 2017 and to determine its behavior and temporal variability. Between January and March 2017, heavy rains occurred on the northern and central coast of Peru, which caused flooding and debris flow that affected the departments of Tumbes, Piura, Lambayeque, La Libertad, and Lima. This event has been described in Peru as "Coastal Child," and according to INDECI reports, it caused the death of 100 people. There are no precipitation stations in Pedregal Ravine, but the Chosica and Santa Eulalia stations were used as a reference, which is located 3 km from the study zone. The Matucana and Carampoma stations located in the upper part were also analyzed in order to better understand the spatial behavior of precipitation in the entire basin. Two statistical tests have been used to detect changes in the precipitation time series: Mann Kendall and Student’s T. The results of these tests indicate that there is a change in the behavior of precipitation in Pedregal Ravine between the period of 1980 and 2017; this change is a tendency to increase rainfall.

Keywords: variability, climate, sustainable development, flooding, debris flows

https://imces.tech/




about:blank



50


168 PERFORMANCE ANALYSIS OF THE QUANTUM PROCESSOR: BASED ON REVERSIBLE SHIFT

REGISTER USING QCA

1,2Rajinder Tiwari, 3Anil Kumar, 4Preeta Sharan 1Research Scholar, Department of ECE, ASET, Amity University, Lucknow (India).

2Assoc. Professor, Department of ECE, Model Institute of Engineering & Technology (MIET), Jammu (India)

3Asst. Pro VC & Director, ASET, Amity University, Lucknow (India). 4Professor, Department of ECE, The Oxford College of Engineering & Technology, Bengaluru

(India). [email protected], [email protected], [email protected],

ABSTRACT The concept of reversible logic depends on the dominant modules of a processor that have been motivated to obtain the performance analysis of the quantum based processors. In continuation to this discussion, the shift register can be studied with the use of the reversible logic which is capable of shifting the bits of the information towards both sides i.e. left and right. In this process of the analysis of the quantum processor, the Quantum Computational Automata (QCA) as well as Verilog, software has been used so as to simulate the parameters of the device and then obtain the characteristics of the device. In this discussion, a reversible logical computing based approach has been mentioned that can be used in the ALU of a quantum processor with the help of D-type FFs or its combination that act as an inevitable and the most crucial basic building block in the design of quantum processors. This circuit has been designed and analyzed for the most dominant parameters, say, size of cell, number of cells used, delay, temperature dependency, power dissipation, etc. This proposed circuit which acts as an alternative to the CMOS technology, has been analyzed for a typical range of the power dissipation (650 – 750 meV), temperature range (1ºK – 10ºK). KEYWORDS: QCA, CMOS, Power Dissipation, QCA Well, Shift Register, Reversible Logic Computation, Quantum Processor.

https://imces.tech/






51


169 ADHESION LEVEL IDENTIFICATION IN WHEEL-RAIL CONTACT USING DEEP NEURAL NETWORKS

Sanaullah Mehran Ujjan1, Imtiaz Hussain Kalwar2, Bhawani Shankar Chowdhry1, Tayab din Memon1, Dileep Kumar Soother1

1Mehran University of Engineering and Technology, Jamshoro,(Pakistan).

2DHA Suffa University. Karachi (Pakistan).

[email protected], [email protected], [email protected], [email protected],

[email protected]

ABSTRACT Robust and accurate adhesion level identification is crucial for proper operation of railway vehicle. It is necessary for braking and traction forces characterization, development of maintenance strategies, wheel-rail wear predictions and development of robust onboard health monitoring systems. Adhesion being the function of many uncertain parameters is difficult to model, whereas data driven algorithms such as Deep Neural networks (DNNs) are very good at mapping a nonlinear function from cause to effect. In this research a solid axle Wheel-set was modeled along with different adhesion conditions and a dataset was prepared for the training of DNNs in Python. Furthermore, it explored the potential of DNNs and various data driven algorithms on our noisy sequential dataset for classification task and achieved 91% accuracy in identification of adhesion condition with our final model. KEYWORDS: Wheel-rail contact, Adhesion, Solid-axle Wheel-set, Deep learning, Neural networks, Classification, Time-series data.

https://imces.tech/








52


170 Soil Quality Assessment of Vacant Land Reconverted to

Agricultural Land

David Licapa1, Doris Esenarro2 ,Ciro Rodriguez3 , Vicenta Irene Tafur 4 , Cesar

Minga5

University National Federico Villarreal. Lima, Perú 1,4

Specialized Institute Ecosystems and Natural Resources Research (INERN) 2,3,5

[email protected], [email protected], [email protected],


Abstract

Solid and hazardous waste cannot be solved simply by burying them in the ground.

Confining hazardous waste, far from being a solution, is a way of postponing the

problem. The waste minimization, which reduces the amount and pollution load of

waste, generates by-products. The objective of this study was to evaluate the quality

of the soil of a converted agricultural land from vacant land, located in the Villa El

Salvador district in Metropolitan Lima. The benefits of reducing the environmental

impact on food security and climate change, the result obtain the content of organic

matter in the study soil of 1.31%, its equivalent in organic carbon is obtained by

dividing by the factor 1.724, resulting in 0.76%.

Keywords: Soil quality, vacant land, reconverted, agricultural land, solid waste

https://imces.tech/





53


171

Effect of Corona epidemic on research activities of researchers in Engineering universities in Pakistan and its

solution via technology

Shafiq-ur-Rehman Massan1, * Muhammad Mujtaba Shaikh2 Abdul Samad Dahri3

QEC and Co-ordination, Mohammad Ali Jinnah University, Karachi, Pakistan Mehran University of Engineering and Technology, Jamshoro, Pakistan

Business Administration and Social Sciences, Mohammad Ali Jinnah University, Karachi, Pakistan [email protected], [email protected], [email protected]

Abstract

This work focuses on taking the research from impact factor to impact which means

that it would propose the best interventions required at both public and private sector

universities to improve the research scenario in times of emergency. The timing of this

work coincides with the current corona virus pandemic and it encompasses the best

practices for such an era in modern times. It proposes the requisite revamping and

careful reworking of the university towards becoming a research enabler for the

students at a time of crisis. This article analyzes the effects of the Coronavirus disease

on the researchers who must maintain social distance during confinement at the

university and yet be able to carry out meaningful research by utilizing

videoconferencing and other facilities.

Keywords: Engineering, Technology, Video-conferencing, Research, Private Sector

University (PRV), Public Sector University (PSU), Higher Education Commission

(HEC), National Academy for Higher Education (NAHE), Research goals (RG),

Video conferencing (VF), WhatsApp (WA).


https://imces.tech/






54

172 A NEW PLANAR MULTI-RESONATOR FOR PASSIVE UWB RFID CHIPLESS TAG

1A K M Zakir Hossain, 2Muhammad Ibn Ibrahimy, 2S M A Motakabber,

3Mohammad Kamrul Hasan

1Universiti Teknikal Malaysia Melaka (UTeM), Melaka, (Malaysia) 2International Islamic University Malaysia (IIUM). Gombak (Malaysia).

3Universiti Kebangsaan Malaysia. 43600 UKM, Bangi (Malaysia). [email protected],[email protected], [email protected], [email protected]

Abstract This article proposes a new type of planar microstrip multi-resonator called “truncated C shape” which can replace the existing planar rectangular type resonator for UWB RFID chipless tag application that employs the transmission line method. It is found that with the new resonator, 9 bit can be imposed while replacing the existing planar rectangular resonator that gives only 1 bit in terms of the occupied area. Two bits of the rectangular resonator have been replaced that produced an ‘18 bit’ new proposed tag. Two different coded 18 bit tags has been designed and developed that works between 5-8.5 GHz. Good agreement is found between simulation and measurement. The codes of “111111111111111111” and “110011111111111111” have been successfully retrieved from different tags to illustrate the proof of concept. This result would motivate the researchers to develop higher bit density UWB passive RFID tags with relatively smaller size for item tagging and also sensing applications. Keywords: Planar Microstrip, Multi-resonator, Planar Rectangular Resonator, UWB RFID, Passive RFID tag

https://imces.tech/





55


179

Usability of eGovernance application for citizens of Pakistan

Abdul Samad Dahri1, Shafiq-ur-Rehman Massan1*, Ayaz Ali Maitlo2 1Mohammad Ali Jinnah University, Karachi, Pakistan

2University of Sindh, Larkana Campus, Pakistan


Abstract

eGovernance is a vital component of any nations’ modern governmental structure and suitable for mass-scale adaptation. Pakistan has also established an eGovernance council for mitigation of the problems of the common man. One big step in this direction is the establishment of Pakistan Citizens’ Portal (PCP) that facilitates eGovernance. Through the PCP app, citizens can directly lodge complaints and report their issues for immediate resolution. This study looks at the important aspect of mobile usability through field tests to determine the viability of the PCP app in Pakistan. This study is vital towards determining the main factors for large scale adaptation of the PCP app and underlines the weaknesses of the present system. Hence, the PCP app was evaluated in terms of efficiency and effectiveness according to ISO 92421-11. And the user satisfaction was measured through system usability satisfaction (SUS) on five-point likert scale. The evaluation method included more than a dozen citizens of Sindh and findings showed that overall application enriched the user experience. However, the few areas of PCP were identified as needing improvements. The main areas that the PCP application needs to improve are the areas of registration and ‘findability’ which would further improve user satisfaction and experience.

Keywords: eGovernance (eGov), usability evaluation, commoner satisfaction,

Pakistan Citizen Portal (PCP). ISO designed usability standards (SUS).

https://imces.tech/






56


180

EXTENDED KALMAN FILTER FOR ESTIMATION OF CONTACT FORCES AT WHEEL-RAIL

INTERFACE

Khakoo Mal1, Imtiaz Hussain2,Bhawani Shankar Chowdhry1, Tayab din

Memon1

1Mehran University of Engineering and Technology, Jamshoro (Pakistan)

2DHA Suffa University. Karachi (Pakistan). [email protected],[email protected],[email protected].

edu.pk, [email protected]

ABSTRACT

The wheel-track interface is the most significant part in the railway dynamics because the

forces produced at wheel-track interface governs the dynamic behavior of entire vehicle.

This contact force is complex and highly non-linear function of creep and affected with

other railway vehicle parameters. The real knowledge of creep force is necessary for reliable

and safe railway vehicle operation. This paper proposed model-based estimation technique

to estimate non-linear wheelset dynamics. In this paper, non-linear railway wheelset is

modeled and estimated using Extended Kalman Filter (EKF). Both wheelset model and

EKF are developed and simulated in Simulink/MATLAB.

Keywords: Railway dynamics, Wheel-rail interface, Model-based estimation, Extended

Kalman Filter

https://imces.tech/







57


182 The negative effect of Incivility on Job Satisfaction through emotional exhaustion Moderated by Resonant leadership

Abdul Samad Dahri1, Muhammad Asif Qureshi1, Abdul Ghaffar Mallah2,

1Faculty of Business Administration and Social Sciences, Mohammad Ali Jinnah University

2Department of Business Administration, Government Degree college [email protected], [email protected], [email protected]

Abstract

Job dissatisfaction challenge among nurses has a remarkable impact on patient safety and quality of any healthcare system. The study examines the negative effect of workplace incivility on job satisfaction among nurses through the mediation of emotional exhaustion and helps understand the moderating role of resonant leadership between emotional exhaustion and job satisfaction. The study adopts a cross-sectional self-administered survey design to collect 129 responses of registered nurses based on a stratified random sampling technique in Pakistan. Smart-PLS analyzed data revealed the statistically direct insignificant effect of workplace incivility and significant indirect effect on job satisfaction through emotional exhaustion. The results affirmed the emotional exhaustion mediation where resonant leadership had a significant positive moderating role that buffered the negative effect of emotional exhaustion on job satisfaction. Though potentially useful for HR managers, this study is exposed to sample and generalizability limitations. Therefore, opens consideration for solutions in further explorations. Keywords: Resonant Leadership; Workplace incivility; Emotional exhaustion; Job Satisfaction.

https://imces.tech/





58


184 Application of Artificial Neural Networks to assess the effects of incivility on job satisfaction through emotional exhaustion

Abdul Samad Dahri1, Shafiq-ur-Rehman Massan*2,Abdul Ghaffar Mallah3 1Business Administration and Social Sciences, Mohammad Ali Jinnah University, Karachi, Pakistan

2QEC and Co-ordination, Mohammad Ali Jinnah University, Karachi, Pakistan 3Department of Business Administration, Government Degree college


Abstract

Purpose: This study articulates contribution to understand effect of workplace

incivility experience sourced from supervisor and co-worker through emotional

exhaustion on job satisfaction based on COR theory at practical and academic junction.

Methods: Linear regression through Structural equation modelling and non-linear

through artificial neural network techniques were applied for reliable predictability

between relationships in survey sample from healthcare nurses in Pakistan. Findings:

Results from SEM and ANN revealed that supervisor and co-worker incivility exhaust

the employee emotions that furthers the negative effect on job satisfaction of nurses in

public healthcare hospitals. Originality: Supervisor and co-worker incivility are negative

features that reduce job satisfaction among nurses through emotional exhaustion. This

study develops understanding regarding the effect of incivility on job satisfaction in

Asian public work settings context. This paper discusses the implications of urgency to

make work settings a better place for workforce at all levels.

Keywords: Workplace incivility, Supervisor, Co-worker, Emotional exhaustion, Job

satisfaction, Artificial Neural Network, Structural Equation Modelling, Healthcare.

https://imces.tech/






59

OUR PAST CONFERENCE IN MALAYSIA: 2016, 2017

https://imces.tech/



60

OUR PAST CONFERENCE IN THAILAND AND IRELAND

SATELLITE SESSION IN BANGALORE, INDIA: 2019, 2020

https://imces.tech/



61

https://imces.tech/



62

FUTURE CONFERENCE

https://imces.tech/

Documents

Proceedings of 3rd International Multi-Topic ... - IMCES