A fluid analysis report that iseasy to read and understand.

Fluid is the “Lifeblood” of every hydraulic system. A sample can pinpointsources of contamination.

Features/Benefits:• Comprehensive, yet

easy-to-read analysis laboratory fluid analysis

• Particle Count• Water Content• TAN/PH• Viscosity

• Microscopy• XRF (use P/N 894277

to include ICP)• Avoid Equipment Failure• Optimize Performance• Verify Filtration is working• Extend Component Life

fluid analysis service

P/N 894276

Filters out airborne particlesbefore it contaminates the oil.

Hydraulic reservoirs“breathe” air in and out asthe oil level rises and falls.This air contains particles.Particles “sand blast” yourmachinery. Protect yourhydraulic system with a dirt-gate filter.

Features/Benefits:• Visual Mechanical

Indicator: The indicatoractuates when particleshave blocked the media,before the pump cavitates.

• Easy Installation:Lightweight design; onlyneeds to be hand tightenedonto adapter.

• Rugged Housing: Protectsthe media from externalsplashing.

• High Efficiency (99% at 2 microns)

• Very Low Pressure Drop

Works even when the system is shut down.See the following page for a detailed explanationof how it works.Part number: BR210

dirt-gate™ reservoir breather

P/N BR210

Proactive Maintenance

Part number: 894276

Eaton14615 Lone Oak RoadEden Prairie, MN 55344USATel: 952 937-9800Fax: 952 974-7722www.hydraulics.eaton.com

Eaton20 Rosamond RoadFootscrayVictoria 3011AustraliaTel: (61) 3 9319 8222Fax: (61) 3 9318 5714

EatonDr.-Reckeweg-Str. 1D-76532 Baden-BadenGermanyTel: (49) 7221 682-0Fax: (49) 7221 682-788

© 2004 Eaton CorporationAll Rights Reserved Printed in USADocument No. V-FIFI-MS001-E June 2004

H2O-gate™ reservoir breather

P/N BR110

Filters out particles and moisture before it contaminatesthe oil.

Hydraulic reservoirs“breathe” air in and out asthe oil level rises and falls.This air contains particles andwater. Particles “sand blast”your machinery and waterattacks your oil and compo-nents. The H20-gate reservoirbreather filters out particlesand moisture. Protect yourhydraulic system with a filter.

Features/Benefits:• Visual Mechanical

Indicator: The indicatoractuates when particleshave blocked the media,before the pump cavitates.

• Proprietary Media:Reduces dew point temperature to preventcondensation and is 99.7% efficient in blocking particles 3µ and larger.

• Reversible Flow ThroughMedia: Allows for moistureto exit the reservoir.

• Easy Installation:Lightweight design; onlyneeds to be hand tightenedonto adapter.

• Rugged Housing:Protects the media fromexternal splashing.

Part numbers:

H2O-gate BR110Bayonet Adapter 924710Screw-in Adapter P-077002

Performs as a gateDuring the “inhalation” cycle, the H2O-gate proprietary mediablocks the water vapor fromentering the reservoir. Duringthe “exhalation” cycle, the mediaallows the moisture in the reservoir air to exit. The moistureis carried off the media by theexiting air, restoring the media’swater barrier capacity, and themoisture barrier mechanism isnot affected by the amount ofexposure to moisture. The reservoir air is maintained at alow relative humidity, and moreimportantly, at a lower dew pointtemperature than the ambienttemperature.

Works even when the systemis shut down.The H2O-gate Vent Breatherretards the vapor equilibriumprocess and works to preventcondensation even after the system is shut and cooled down,such as overnight. As this chartillustrates, the dewpoint is slowto climb, even after the systemtemperature has dropped to theambient temperature. Once thesystem has reached ambient temperature, condensation doesnot occur.

Reduces humidity inside reservoir.The H2O-gate Vent Breather lowers and stabilizes the relativehumidity of air inside the reservoir, leading to a lowerdewpoint (Tdewpoint < Tambient= NO CONDENSATION) at a rate and amount that will bedependent upon several conditions: the ambient conditions,the internal reservoir heat,amount and frequency of reservoir air flow through thevent, and the temperature of the reservoir surfaces.