PRO-COATPRO-COATRADCOATRADCOAT

ON SITE UVON SITE UV FLOOR COATINGSFLOOR COATINGS

CURING AT THE SPEED OF LIGHTCURING AT THE SPEED OF LIGHT

Made of

DESCRIPTIONDESCRIPTION

• RADCOAT Is an aliphatic waterbourneRADCOAT Is an aliphatic waterbourne

UV Urethane. Exclusively Designed UV Urethane. Exclusively Designed for onsite heavy commercial for onsite heavy commercial applications, where down times are applications, where down times are limited. limited.

Made of

APPLICATIONSAPPLICATIONS

• HOSPITALSHOSPITALS

• CASINOSCASINOS

• FACTORIESFACTORIES

• RESTAURANTSRESTAURANTS

• CORRECTIONAL FACILITYSCORRECTIONAL FACILITYS

• SHOPPING CENTERSSHOPPING CENTERS

• NURSING HOMESNURSING HOMESMade of

BENEFITSBENEFITS

• Fast dry and cure timeFast dry and cure time

• Little or no down timeLittle or no down time

• Immediate use of floorImmediate use of floor

• Mild odorMild odor

• Low emissionsLow emissions

• Extremely durableExtremely durable

• High chemical, scratch and stain resistanceHigh chemical, scratch and stain resistance

• V.O.C CompliantV.O.C CompliantMade of

SUBSTRATESSUBSTRATES

• WoodWood

• ConcreteConcrete

• VCT TileVCT Tile

• Top Coats for EpoxyTop Coats for Epoxy

• Natural StoneNatural Stone

• Seamless FlooringSeamless Flooring

Made of

CURE RATESCURE RATES

• RADCOAT Waterbourne UVRADCOAT Waterbourne UV

Urethane is designed for Urethane is designed for instant cure. Compared to instant cure. Compared to

other conventional other conventional coatings where cure rates coatings where cure rates vary from seven to thirty vary from seven to thirty days. Conventional curing days. Conventional curing allows time for your floor allows time for your floor to get damage or to exhibit to get damage or to exhibit early wear or loss of early wear or loss of performance .performance .

0102030405060708090

100

1DAY

3DAY

7DAY

OILBASEDWATERBASEDRADCOAT

Made of

STAIN AND CHEMICAL STAIN AND CHEMICAL RESISANCERESISANCE

• MUSTARD (30 MIN) NO EFFECTMUSTARD (30 MIN) NO EFFECT

• BETADINE (30 MIN) NO EFFECTBETADINE (30 MIN) NO EFFECT

• RIT DYE (30 MIN) NO EFFECTRIT DYE (30 MIN) NO EFFECT

• XYLENE (24 HRS) NO EFFECTXYLENE (24 HRS) NO EFFECT

• ETHANOL (24 HRS) NO EFFECTETHANOL (24 HRS) NO EFFECT

• IPA (24 HRS) NO EFFECTIPA (24 HRS) NO EFFECT

• M.E.K. DOUBLE – RUBS 100 DR NO EFFECTM.E.K. DOUBLE – RUBS 100 DR NO EFFECT

• BLACK HEEL MAR RESISTANCE (BHMR) PASSBLACK HEEL MAR RESISTANCE (BHMR) PASSMade of

PHYSICAL PROPERTYSPHYSICAL PROPERTYS

Ingredients – 100% Aliphatic UV Waterbourne UrethaneIngredients – 100% Aliphatic UV Waterbourne Urethane

Appearance - Translucent White LiquidAppearance - Translucent White Liquid

Total Solids - 33% Total Solids - 33%

pH - 8.0pH - 8.0

Viscosity - #2 Zhan Cup 25 Seconds Viscosity - #2 Zhan Cup 25 Seconds

Flash Point - >200 FFlash Point - >200 F

Clarity - Total ClearClarity - Total Clear

Stability - 1 YearStability - 1 Year

Pendulum Hardness (before UV) 45 secondsPendulum Hardness (before UV) 45 seconds

Pendulum Hardness (after UV) 140 secondsPendulum Hardness (after UV) 140 seconds

Taber Abrasion CS-10 wheel 1000g, 1000 cycles 24mg. LossTaber Abrasion CS-10 wheel 1000g, 1000 cycles 24mg. Loss

Taber Abrasion CS-17 wheel 1000g, 1000 cycles 33mg. LossTaber Abrasion CS-17 wheel 1000g, 1000 cycles 33mg. Loss

UV-Cure Requirements Standard mercury lamp 400 mj./cm.2UV-Cure Requirements Standard mercury lamp 400 mj./cm.2Made of