Use

r’s G

uid

e

PRISMATIC CONTROLLER FOR XBOX ONE

QUICK START Connect The Afterglow PrismaticController to your Xbox One via theincluded cable.

048-007-NA048-007-EU

CONNECTING THE AFTERGLOWPRISMATIC CONTROLLER

ENG

LISH

1 2

Plug the small (micro) USB end of the cable intothe top of the controller.

Connect the large (standard) USB end of thecable into the Xbox One via any availableUSB port.

The white status LED above the Xbox button willilluminate, indicating that you are ready to play.

FEATURES Signature Prismatic LED lighting Dual Multi-Function Wheels allow users toremap up to 6 actions Premium ALPS analog sticks 3.5 mm audio jack and onboard audio controls Dual rumble motors and impulse triggers 10 ft (3 m) USB cable included Compatible with the Afterglow ConfigurationApp for Xbox One

1 Afterglow Prismatic Controller for Xbox One 1 10 ft (3 m) USB cable 1 Manual

CONTENTS

Programbutton Press once

Press twice

Press threetimes

Program statusLED color Blue

Green

Yellow

Function

Set color andbrightness with theanalog sticks. Pressprogram buttonto set. Map actions toMulti-FunctionWheels. (Activatewheel, then buttonto map.) Turn red rumble /impulse LEDs onand off with D-PadUP (on) orDOWN (off).

LEFT AND RIGHT BUMPERS

WHITE STATUS LED

VIEW

MENU

LEFT AND RIGHT ANALOG STICKS

LEFT AND RIGHT TRIGGERS

MULTI-FUNCTION WHEELS

3.5 mm AUDIO JACK

AUDIOFUNCTIONBUTTON

PROGRAMBUTTON

PROGRAMSTATUSLED

XBOX BUTTON

PRISMATICLIGHT PIPE

D-PAD / AUDIO CONTROLS

SCROLL UPR3

SCROLL DOWNRB

CLICKD-PAD RIGHT

SCROLL UPL3

SCROLL DOWNLB

CLICKD-PAD LEFT

3

1

2

3

4

Increase and decrease volumeby holding the audio functionbutton and pressing the D-PadUP or DOWN.

Adjust the game/chat audiobalance by holding the audiobutton and pressing the D-PadLEFT or RIGHT.

AUDIO SETTINGS

Mute and unmute yourmicrophone by quicklypressing twice on the audiofunction button. The programstatus LED will turn REDwhen muted.

PRISMATIC LIGHT PIPE SETTINGS

Press the program button on the back of thecontroller once.

The program status LED will turn BLUE.

1

2

Press the program button on the back of thecontroller three times.

The program status LED will turn yellow.

Press the D-Pad UP to set the rumble / impulseLEDs to ON, or press the D-Pad DOWN to setthe LEDs to OFF.

7

1

2

3

8

Minimal maintenance is required. It is advised toclean the controller with a microfiber cloth everyother month.

If the controller is not turning on or the white status LED is notlighting up, try the following solutions: Check that the Xbox One is turned on and running properly. Ensure the cable is completely plugged in to both the console andthe controller. Unplug the USB cable from the controller and plug it back in. If you experience any problems with the analog sticks or triggers,your controller may need to be recalibrated. Contact PDP CustomerSupport for recalibration instructions. If any further issues arise, please contact PDP Customer Service atsupport.pdp.com or 1(800) 331-3844 (USA and Canada only).

MAINTAINING THE CONTROLLER

5 6

PROGRAMMING THEMULTI-FUNCTION WHEELS3

Before releasing the analog sticks, press theprogram button to lock in the lighting settings.

4

Press the program button on the back of thecontroller twice.

1

The program status LED will turn GREEN.

2

Activate the Multi-Function Wheel in thedirection you would like to map the action to.

3

The program status LED will begin flashing.

4

Press the action button, stick, bumper, or D-Paddirection you would like mapped to theMulti-Function Wheel.

5

The program status LED will turn off, indicatingthat the Multi-Function Wheel will now activatethe mapped function.

6

Repeat steps 1 through 6 for all the buttons youwant to map, or you can remap a differentcommand to those that are already mapped.

7

RUMBLE / IMPULSE LED SETTING

TROUBLESHOOTING

Use the LEFT analog stick tocontrol the brightness and theRIGHT analog stick to controlthe hue of the lighting effects.