CHOOSE A NETWORK

Settings Wi-Fi

Your WiFi Network

WiFi

DefaultWiFi

ScandiWiFi09

1 device found Primare NP5 is ready for set up

Device setup

SET UP

Welcome home

Connecting to Primare NP5...Your phone or tablet may disconnect from Wi-Fi during setup

Primare I35 foundWould you like to set up this device?

Primare NP5 foundWould you like to set up this device?

Primare I35 foundWould you like to set up this device?Did you hear the sound?

This lets you know you´re connected to the right Primare NP5Where is the device?

Choose a location for your Primare NP5. This will help name and organize your devices.

My roomsBackyardNP5 Terry

Create newAtticBackyard

Install the NP5 Prisma in your system following the instructions in the user guide. The NP5 Prisma will turn on when the power cable is connected, at which point you can begin the setup process.

Enable Bluetooth and WiFi on your mobile device. Connect the mobile device to the network you want the Prisma device to use.

Download and open the Google Home app on your mobile device. On the app’s home page you will see a Device setup field for any Prisma products to be setup.

Select the Prisma product you want to configure by pressing Set Up. The display of your Primare Prisma product will display Configure network.

The Google Home app will automatically connect your mobile device to your Primare Prisma Product.

Once connected you will hear a test tone and see the graphic above on your mobile device.

You then choose a location or name for the device by either selecting a room name or by using the “adding a custom room” function at the bottom of the page.

The WiFi LED will flash blue, or green if you have selected to connect using ethernet cable, to indicate that the NP5 Prisma is in Setup mode. The LED will stop flashing when setup is complete.

01 03

05 080706

02 04

Primare NP5 Prisma Chromecast built-in Quick Start Guide

The instructions below will allow you to quickly and easily set up your Primare Prisma product to your WiFi network and mobile device in order to cast music or stream from hundreds of services with Chromecast built-In.

Prisma product network name (SSID): Chromecast built-in serial number:

Primare I35 foundConnected

ChromecastCast Button

Connecting to Wi-FiChoose the Wi-Fi network you would like to use with your

Primare NP5

Testnet5Telia5GHz-2612BD

Testnet2,4

dlink-2814-5GhzOther Wi-Fi network...

Primare I35 foundWould you like to set up this device?

Connecting to Wi-FiPrimare NP5 is now connecting to Testnet5

Primare I35 foundWould you like to set up this device?Linking your Primare NP5

Your Primare NP5 uses your Google account to personalize your experience

Select the WiFi network (WLAN) you wish to connect to and push connect. Note: if connecting by Ethernet cable (LAN), this step will be skipped, with network connection being made immediately.

It will take some time to connect to your chosen WiFi network. During this time an animated graphic will be in motion, indicating that the process is underway.

Once you are connected to the WiFi network, the graphic will assemble into a stable image.

At this stage you will have the opportunity to link your Primare Prisma product to your Google account, should you have one, to personalize your experience.

Almost done! – Review what you have done so far. And upon pressing next at the bottom of the screen you should see that your device is setup and ready.

The next steps will provide you with a tutorial to show you how to use Chromecast or you can press “Skip tutorial” to begin casting.

Should you have any questions or require further information, please contact us at info@primare.net

Select a music streaming app or a song from your mobile device, and press the Chromecast icon to start streaming.

12

13 14 15

1109 10

The information provided in this document is intended for informational purposes only and is subject to change without notice. The process may vary with different devices and services.