Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Pricelist 01/2012 Valid from 01. april 2012
GB
Mounting systems for solar technology
NEW! electronic pricelist, easy to use!
TABLE OF CONTENTS
4 - 5
6 - 7
8 - 9
10 - 11
12 - 13
14 - 15
16 - 17
18 - 19
20 - 21
22 - 23
24 - 25
26 - 27
28 - 29
30 - 31
32 - 33
34 - 35
36 - 37
38 - 39
40 - 41
42 - 43
44 - 47
48 - 51
52 - 53
54 - 55
Company
fUnCTion of THE priCE lisT
SySTEmSoVErViEw piTCHEd roof sysTEms
speedrail system
Flatrail system
solidrail roof fastener system
crossrail roof fastener system
solar fastener
rafter screw
Pitched roof system
oVErViEw flaT roof sysTEms
D-level system
s-level system
s-level system 2.11
oVErViEw sUpplEmEnTary sysTEm
cross Bracing with crossrail
triangle system
AddOn system
oVErViEw GroUnd moUnTEd sysTEms
t-rack system 2.11
N-rack system - screw-in foundation
N-rack system - concrete foundation
N-rack system Mono
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 3
TABLE OF CONTENTS
56 - 57
58 - 67
68 - 77
78 - 83
84 - 89
90 - 97
98 - 103
104 - 107
108
109
110
PrOduCTS
moUnTinG rails
roof aTTaCHmEnTs
moUnTinG modUlE
sCrEws & nUTs
aCCEssoriEs
sysTEm ComponEnTs
GENErAL
alB
noTEs
pUrCHasE ordEr form
approaCH
PArTNEr WiTh SySTEm
With sophisticated product ideas and a noticeable customer
focus, K2 systems is the sympathetic partner in the
mounting systems for solar technology sector. international
customers value our tried and tested designs for use on
roofs and walls, as well as ground mounted solutions and
individual solutions. K2 mounting systems impress with
their appealing design and many well thought out details.
High quality materials and a quality-conscious finish
guarantee the highest functionality and durability. Our
range is comprised of just a few, perfectly coordinated
components. this lowers the cost of materials, simplifies
installation and saves time and money. As a young
company with branches in italy and France, we believe in
cooperation in a spirit of partnership. in order to endure the
dynamic development of our company, we permanently
strive to further optimise our product range. the know-
ledge we gain from personal interaction with our customers
also has an influence in this process.
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 5
ThE hEArT ArE Our PrOduCTS
Our products are very important to us. they are with us
from the initial concept, through the production right up
until the final plant manufacturing. Our selection is charac-
terised among other things by a clear product range – an
advantage which originates from the modular structure of
K2 systems. Among the five product groups mounting rails,
roof fasteners, mounting accessories, connecting elements
and bolted connections are all essential system compo-
nents. each of our systems can be combined and used in all
location conditions of the respective snow and wind load
zones. We use aluminium and stainless steel for most of
our components. that guarantees high resistance to corro-
sion, durability and provides customer satisfaction.
FuNCTiON OF ThE PriCE LiST
it’s not just our systems that are easy to manage, our new price
list can now also be navigated quickly.
Our price list is now interactive, so that in future it will be even
easier to find out the advantages of our systems and look up
product-specific details.
links have been imbedded in the images and text, providing
you with a framework for browsing the items that make up our
systems.
When you move the cursor over a text or image, the hand
symbol will show you whether a link is available.
By clicking, you can then go straight to the chosen system or
product details. the list on the right will lead you directly to the
various categories.
should you have any questions regarding the price list, please
don’t hesitate to call our service hotline on +49 7152 3560-0.
Using the toolbar below the price list, various functions can be
carried out such as magnification, browsing or searching.
You can also “touch” the corners of the pages to browse the
price list.
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 7
QUiCk + Easy
1. Go to the system overview
2. click on a system
3. click on an item
-> the item and its alternatives are shown
SySTEm OvErviEW
Page 34
Page 42
Page 26
Page 10Pitched roof systems
Flat roof systems
supplementary system
Ground Mounted systems
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 9
Page 14
Page 18
Page 16
Page 12
PiTChEd rOOF SySTEmS
speedrail system – trapezoidal metal sheet
solidrail roof fastener system
crossrail roof fastener system
Flat roof system
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 11
Page 20
Page 22
solar fastener system – corrugated fibre cement roofing & trapezoidal metal sheet
rafter screw system – corrugated fibre cement roofing & trapezoidal metal sheet
Page 24Pitched roof system
¬ the K2 speedrail system for trapezoidal sheet metal roofs ¬ simple and extremely fast assembly from above with the K2 speedclip and K2 speedlock ¬ system rails K2 speedrail 22, K2 speedrail 36 ¬ Very attractive price-performance ratio ¬ can also be installed in cross bracing (e.g. with crossrail) ¬ General technical approval Z-14.4-603 has been applied for ¬ cstB certification for France ¬ High flexibility - for all module types
SPEEdrAiL SySTEm
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 13
THE maTErials rEQUirEd
Page 76
Page 77
Page 80
Page 63
Page 82
Page 83
Page 62
Page 62
Page 62
Page 62
Mounting rail speedrail 22
Material: Aluminium
Alternatively: speedrail 36
Material: Aluminium
speedclip
Material: Glass fibre reinforced polyamid, ePDM
M K2 slot nut
Material: stainless steel
K2 speedconnector set
Material: stainless steel, Aluminium
speedlock set
Material: Aluminium, stainless steel
Module end clamp standard set
Material: Aluminium
Module Middle clamp standard set
Material: Aluminium
Alternatively: Module Middle clamp Xs set
self-tapping screw with mounted ePDM supported washer
Material: stainless steel A2, ePDM
¬ Mounting system for flat rail on trapezoidal sheet metal roofs¬ Quick assembly by fitting or bolting from above¬ Very attractive price-performance ratio¬ can also be installed in cross bracing (e.g. with crossrail) or with mounting grid¬ For horizontal and vertical module orientation¬ Modular structure suitable for any system size
FLAT rAiL SySTEm
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 15
THE maTErials rEQUirEd
Page 83
Page 87
Page 93
Page 63
Page 63Flat rail 22
Material: Aluminium
Alternatively: speedrail
K2 Flatconnector set
Material: Aluminium
ePDM-sealing strip
Material: ePDM
Blind rivet (Alu-cAP ø 4,8 mushroom-head)
Material: Aluminium, stainless steel
self-tapping screw with mounted ePDM supported washer
Material: stainless steel A2, ePDM
Page 80Module end clamp standard set
Material: Aluminium
Page 76Module Middle clamp standard set
Material: Aluminium
Page 62
STAiNLESS STEEL rOOF FASTENEr SySTEm
¬ K2 roof fasteners for pan tiled roofs ¬ Geometry optimised for K2 system components ¬ excellent resistance to corrosion due to the use of stainless steel ¬ Highly flexible due to adjustment of height under bracket (depending on type),
roof fastener for almost any application ¬ short assembly time thanks to simple system components ¬ Modular structure suitable for any system size ¬ can also be installed in cross bracing (e.g. with K2 crossrail)
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 17
THE maTErials rEQUirEd
Page 58
Page 59
Page 59
Page 84
Page 82
Page 82
Page 69
Page 68roof Fastener for Pan tile
Material: stainless steel
Alternatively: roof fastener Vario 1, Vario 2, coppo, spanish tile
roof (rafters or concrete), spanish tile roof (purlins)
self-drilling timber screw, round
Material: stainless steel
Alternatively: For roof insulation, a self-drilling timber screw with
distance screw is required
t-Bolt M10 x 30
Material: stainless steel
Mounting rails solidrail Family
Material: Aluminium
rail connector set solidrail Family
Material: Aluminium
K2 endcap for solidrail Family
Material: glass fibre reinforced polyamid
Page 84locking nut M10Material: stainless steel
Page 80Module end clamp standard set
Material: Aluminium
Page 76
Page 77
Module Middle clamp standard set
Material: Aluminium
Alternatively: Module Middle clamp Xs set
¬ the light-weight K2 roof fastener for many different types of pan tiled roofs ¬ Quick installation with only one screw connection from above with K2 climber and K2 crossrail ¬ sophisticated geometry and targeted use of materials allow for increased span widths at installation ¬ Optimised for K2 crossrail and K2 climber system components ¬ excellent resistance to corrosion due to high-quality marine grade t66 aluminium ¬ High level of flexibility due to adjustability of height under bracket¬ easy to install with simple system components ¬ Modular structure suitable for any system size ¬ can also be installed in cross bracing (e.g. with crossrail)
ALumiNium rOOF FASTENEr SySTEm
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 19
THE maTErials rEQUirEd
Page 69
Page 67
Page 65
Page 65
Page 88
Page 64
crossHook 1
Material: Aluminium
climber 36/48 (with long slot) set
Material: Aluminium
Mounting rails crossrail Family
Material: Aluminium
rail connector set crossrail Family
Material: Aluminium
K2 Pad spacer
Material: glass fibre reinforced polyamid
K2 endcap für crossrail Family
Material: glass fibre reinforced polyamid
Page 80Module end clamp standard set
Material: Aluminium
Page 76
Page 77
Module Middle clamp standard set
Material: Aluminium
Alternatively: Module Middle clamp Xs set
Page 85Allen bolt DiN 912 M8
Material: stainless steel, sW: 18 mm
Page 82
Page 82
self-drilling timber screw, round
Material: stainless steel
Alternatively: For roof insulation, a self-drilling timber screw with
distance screw is required
SOLAr FASTENEr SySTEm
¬ For roofs with steel or aluminium profile or fibre cement roofing ¬ screw head with hexagon drive allows for assembly with electric screwdriver ¬ extra-long metric thread for height adjustment ¬ Assembly using K2 adapter plate ¬ elongated hole enables easy connection by t-bolt to the K2 solid rail or K2 crossrail range ¬ All components made of high-quality stainless steel and aluminium, sealing element made of
high quality ePDM ¬ Greater span widths possible by mounting with K2 Bridge ¬ includes technical approval ¬ Modular structure suitable for any system size
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 21
THE maTErials rEQUirEd
Page 72
Page 92
Page 90
Page 58
solar fastener
Material: stainless steel
K2 Bridge
Material: Aluminium
Mounting rails solidrail Family
Ultralight, light, Medium oder Alpin
Material: Aluminium
Adapter plate
Material: stainless steel
Page 84locking nut M10Material: stainless steel, Drive: sW 18 mm
Page 80Module end clamp standard set
Material: Aluminium
Page 76
Page 77
Module Middle clamp standard set
Material: Aluminium
Alternatively: Module Middle clamp Xs set
Page 84t-Bolt M10 x 30
Material: stainless steel
Page 59K2 endcap for solidrail Family
Material: glass fibre reinforced polyamid
hANGEr BOLT SySTEm
¬ For roofs with corrugated fibre cement roofing ¬ Pre-assembled with adapter plate for time-saving assembly ¬ elongated hole enables easy connection by t-bolt to the K2 solid rail range ¬ screw head with hexagon drive allows for assembly with electric screwdriver ¬ extra-long metric thread for height adjustment ¬ All components made of high-quality stainless steel and aluminium, sealing element
made of high quality ePDM ¬ Greater span widths possible by mounting with K2 Bridge
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 23
Page 84t-Bolt M10 x 30
Material: stainless steel
Page 58
Page 90
Page 71
THE maTErials rEQUirEd
Hanger Bolt, pre-assembled
Material: stainless steel, ePDM
K2 BridgeMaterial: Aluminium
Mounting rail solidrail FamilyMaterial: Aluminium
Page 84locking nut M8Material: stainless steel, Drive: sW 18mm
Page 80Module end clamp standard set
Material: Aluminium
Page 76
Page 77
Module Middle clamp standard set
Material: Aluminium
Alternatively: Module Middle clamp Xs set
¬ For roofs with different profiled seamed metal roofing ¬ Fastening with clamps below the seam joint ¬ No roof penetration required¬ strong holding forces ¬ easy and flexible assembly ¬ connection with the K2 solidrail range of rails ¬ can also be installed in cross bracing (e.g. with crossrail) ¬ clamps available in stainless steel or aluminium
(clamps in other materials for different roof types on request) ¬ Modular structure suitable for any system size
PiTChEd rOOF SySTEm
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 25
THE maTErials rEQUirEd
Page 58
Page 59
Mounting rails solidrail Family
Material: Aluminium
rail connector set solidrail Family
Material: Aluminium
Page 84t-Bolt M10 x 30
Material: stainless steel
Page 75clamps
Material: Aluminium/stainless steel
Page 84locking nut M8
Material: stainless steel, Drive: sW 18 mm
Page 80Module end clamp standard set
Material: Aluminium
Page 76Module Middle clamp standard set
Material: Aluminium
Page 30
Page 28
Page 26
FLAT rOOF SySTEmS
D-level system
s-level system 2.11
s-level system
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 27
seite xx
seite xx
seite xx
seite xx
seite xx
¬ For roofs with low ballast potential, with or without attic¬ ideal roof layout due to minimal shading spaces, producing a high return on equity¬ tested in wind tunnel by leading aerodynamic engineers¬ installation-friendly thanks to partially pre-assembled components and fittings from above¬ K2 levelrail as base¬ Also available: K2 building protection mats, especially coated for secure and durable roof
support on virtually all film roofs ¬ Modular structure suitable for any system size
d-LEvEL SySTEm
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 29
THE maTErials rEQUirEd
Page 84t-Bolt M10 x 20, M10 x 30
Material: stainless steel
Page 92
Page 79
Page 88
Page 96
Page 61
Page 61levelrail
Material: Aluminium
rail connector levelrail
Material: Aluminium
D-level Flatroof set
Material: Aluminium
AddOn
Material: glass fibre reinforced polyamid
Module end clamp standard
Material: Aluminium
Alternatively: Underlay plate
Also suited for thin-film modules.
Page 82M K2 slot nut
Material: stainless steel, Plastic
Page 84locking nut M8 & M10
Material: stainless steel
Page 85Allen bolt DiN 912 M8
Material: stainless steel, sW: 18 mm
Page 85lock washer DiN eN 10151
Material: stainless steel
Page 58
Page 59
Mounting rail solidrail light
Material: Aluminium
rail connector set solidrail light
Material: Aluminium
S-LEvEL SySTEm
¬ For roofs with limited ballasting options, south facing¬ Optimum roof utilisation thanks to minimum shade spacing¬ Based on the new K2 levelrail¬ elevation of 20° for low wind loads¬ Aerodynamic design with rear-mounted windbreaker;
system wind tunnel tested by leading structure aerodynamics technicians¬ easy to assemble, simple K2 systems installation¬ For module types 789 - 817 mm and 982 - 1001 mm¬ Made with high grade materials: Aluminum, galvanised steel
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 31
THE maTErials rEQUirEd
Page 61
Page 61
Page 96
Page 97
Page 64
Page 64
Page 79
Page 88
levelrail
Material: Aluminium
rail connector set levelrail
Material: Galvanized steel
s-level Windbreaker
Material: Aluminium
s-level set
Material: Aluminium
Mounting rail crossrail 36
Material: Aluminium
rail connector set crossrail 36
Material: Aluminium
Module end clamp standard
Material: Aluminium
AddOn
Material: glass fibre reinforced polyamid
Page 82M K2 slot nut
Material: stainless steel, Plastic
Page 84locking nut M8
Material: stainless steel, Drive: sW 13
Page 85Allen bolt DiN 912 M8
Material: stainless steel, sW: 18 mm
Page 85lock washer DiN eN 10151
Material: stainless steel
¬ low ballast on-roof system with south orientation ¬ For roofs with low ballast potential ¬ Used on roofs with or without parapet ¬ Available with 20 °elevation angle ¬ installation-friendly thanks to partially pre-assembled components and screw connections from above ¬ Option of K2 flat rail or K2 speedrail as base ¬ Aerodynamically optimised with wind breaker on reverse enabling low ballast ¬ K2 building protection mats, specially coated for secure and durable roof overlay on virtually all
membrane roofs ¬ K2 scale for installation of ballast¬ Modular structure suitable for any system size
S-LEvEL SySTEm 2.11
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 33
THE maTErials rEQUirEd
Page 64
Page 97
Page 84
Page 88
Page 79
Page 64
Page 97
Page 96
Page 90
Page 63
Page 62
Flat rail 22Material: Aluminium
Alternatively: speedrail
solar building protection matMaterial: PUr bound rubber granules with laminated with Alu-triplex foil
s-level WindbreakerMaterial: Aluminium
s-level set pre-assembledMaterial: Aluminium
rail connector set crossrail 36Material: Aluminium
Module end clamp standard Material: Aluminium
AddOnMaterial: glass fibre reinforced polyamid
Mounting rail crossrail 36Material: Aluminium
locking nut M8Material: stainless steel
Optional: K2 scaleMaterial: Aluminium
Page 82M K2 slot nut
Material: stainless steel, Plastic
Page 85Allen bolt DiN 912 M8
Material: stainless steel, sW: 18 mm
Page 85lock washer DiN eN 10151
Material: stainless steel
Page 63K2 Flatconnector set
Material: Aluminium
Page 36
Page 38
Page 40
SuPPLEmENTAry SySTEm
cross Bracing with crossrail
triangle system
AddOn system
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 35
seite xx
seite xx
seite xx
seite xx
seite xx
¬ K2 crossrail system with climber ideal for cross brace mounting¬ easy and fast installation of landscape module layout¬ Uneven roof structures can be easily adjusted using the K2 Pad¬ optimized for a better ventilation of the modules¬ ideal also for thin film modules
CrOSS BrACiNG WiTh CrOSSrAiL
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 37
THE maTErials rEQUirEd
Page 64Mounting rail crossrail
Material: Aluminium
Page 82M K2 slot nut
Material: stainless steel, plastic
Page 85Allen bolt DiN 912 M8
Material: stainless steel, sW: 6
Page 85lock washer DiN eN 10151
Material: stainless steel
Page 67climber 36/48 (with long slot) set
Material: Aluminium
¬ the K2 triangle system can be used on flat and sloped roofs ¬ each triangle is an optimised solution through project-specific customisation ¬ Optimum elevation angles possible for any roof ¬ High flexibility - for all module types ¬ High-quality materials - for long service life ¬ Modular structure suitable for any system size ¬ Ballast using Pe plate or loading system
TriANGLE SySTEm
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 39
THE maTErials rEQUirEd
Page 82M K2 slot nut
Material: stainless steel, plastic
Page 90
Page 61
K2 mounting solar panels
Material: ePDM
Alternatively: levelrail
Page 97triangle system, pre-assembled
Material: Aluminium
Page 80Module end clamp standard set
Material: Aluminium
Page 76Module Middle clamp standard set
Material: Aluminium
Page 58Mounting rails solidrail Family
Material: Aluminium
¬ Mounting adapter for grid assembly or insert assembly¬ ideal for landscape mounting of modules without approval of clamping the modules on the short side¬ Asymmetric shape for easy assembly¬ suitable for all K2 rail systems¬ High quality weather-resistant fibre-glass reinforced polyamide
AddON SySTEm
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 41
THE maTErials rEQUirEd
Page 88AddOn
Material: glass fibre reinforced polyamid
Page 79Module end clamp standard
Material: Aluminium
Page 74Module Middle clamp standard
Material: Aluminium
Page 82M K2 slot nut
Material: stainless steel, plastic
Page 85Allen bolt DiN 912 M8
Material: stainless steel, sW: 18 mm
Page 44
Page 48
Page 52
Page 54
GrOuNd mOuNTEd SySTEm
N-rack system concrete foundation
N-rack system screw-in foundation
N-rack system Mono
t-rack system 2.11
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 43
seite xx
seite xx
seite xx
seite xx
seite xx
¬ the new K2 t rack system 2.11 with pile-driven foundation ¬ time-saving system with low installation effort thanks to pre-assembly ¬ Optimised for the K2 crossrail range of rails ¬ Very attractive price-performance ratio ¬ High flexibility in system design with low driving depth ¬ suitable for most soil types ¬ statically optimised through wind tunnel testing by leading aerodynamics engineers ¬ system with 20°, 25° and 30° tilt angle (different angles on request)
T-rACk SySTEm 2.11
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 45
THE maTErials rEQUirEd
Page 82M K2 slot nut
Material: stainless steel, plastic
Page 65
Page 65
Page 100
Page 100
Page 66
Page 101
Page 67
Mounting rail crossrail 48
Material: Aluminium
rail connector set crossrail 48
Material: Aluminium
Mounting rail crossrail 62
Material: Aluminium
rack-Fork
Material: Aluminium
Drive Pile
Material: steel s235Jr, galvanized
l Angle 60 x 60 x 6
Material: steel s235Jr, galvanized
Page 101ram Post HeA 100
Material: steel s235Jr, galvanized
climber 62/90 set
Material: Aluminium
Page 80Module end clamp standard set
Material: Aluminium
Page 76
Page 77
Module Middle clamp standard set
Material: Aluminium
Alternatively: Module Middle clamp Xs set
Page 84t-Bolt M10 x 30
Material: stainless steel
Washer DiN 9240
Material: stainless steel
endcap crossrail 48
Material: glass fibre reinforced polyamid
Page 84
Page 65
Page 84locking nut M8Material: stainless steel
Page 85Allen bolt DiN 912 M8
Material: stainless steel, sW: 8
Page 85lock washer DiN eN 10151
Material: stainless steel
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 47
N-rACk SySTEm - SCrEW iN FOuNdATiON
¬ K2 N rack system for screw foundations ¬ installation-friendly thanks to ideally coordinated components ¬ Optimised for K2 solid and crossrail mounting rail ranges ¬ can also be used for difficult soil classes (e.g. conversion and disposal sites) ¬ For difficult terrain slopes including east-west balance (up to 20 °) ¬ individual planning and statics for each system ¬ Very attractive price-performance ratio ¬ tested by leading building aerodynamics engineers ¬ Modular structure suitable for any system size
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 49
THE maTErials rEQUirEd
Page 82M K2 slot nut
Material: stainless steel
Page 60
Page 60
Page 60
Page 59
Page 82
Page 98
Page 99
Page 99
Page 98
rack(l-Profil as support, U-profil as cross beam)
self-tapping Drilling screw for connectors 5.5 x 25 for connectors
Material: stainless steel
For alternativ version with adapter tube:
Adapterrohr für Drehfundament
Material: galvanised steel, length: 0,4 m
screw Foundation
Material: galvanized steel
rail connector set solidrail Alpin
Material: Aluminium
Mounting rail solidrail Alpin
Material: Aluminium
Alternatively: Mounting rail solidrail ls
Alternatively: rail connector solidrail ls
Wind Brace Material: stainless steel A2
Page 80Module end clamp standard set
Material: Aluminium
Page 76
Page 77
Module Middle clamp standard set
Material: Aluminium
Alternatively: Module Middle clamp Xs set
Page 84t-Bolt M10 x 30
Material: stainless steel
Additional Material:
lock Nut DiN 985 M12, Hexagon Bolt M16 x 35
Page 84
Page 66
Page 66
Page 65
Page 65
Page 99
Page 98
maTErials rEQUirEd diffEr for n-raCk sysTEm wiTH Crossrail and fork
THE maTErials rEQUirEd
Washer DiN 9240 M12, 5 x 30
Material: stainless steel A2
Mounting rail crossrail 62
Material: Aluminium
rail connector set crossrail 62
Material: Aluminium
Alternatively: rail connector set crossrail 48
Alternatively: Mounting rail crossrail 48
crossAngle
Material: Aluminium
rack
(l-Profil as support, crossrail 48 or 62 as cross beam)
Page 84locking nut M12
Material: stainless steel, Drive: sW 18
Page 85Allen bolt DiN 912 M8
Material: stainless steel, sW: 18 mm
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 51
¬ K2 N rack system for concrete foundations ¬ installation-friendly thanks to ideally coordinated components ¬ Optimised for K2 solid and crossrail mounting rail ranges ¬ can also be used for difficult soil classes (e.g. conversion and disposal sites) ¬ For difficult terrain slopes including east-west balance (up to 20 °) ¬ individual planning and statics for each system ¬ Very attractive price-performance ratio ¬ tested by leading building aerodynamics engineers ¬ Modular structure suitable for any system size
N-rACk SySTEm - CONCrETE FOuNdATiON
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 53
THE maTErials rEQUirEd
Page 82M K2 slot nut
Material: stainless steel, Plastic
Page 58
Page 59
Page 98
Page 98
Page 83
Page 98
Page 84
Wind Brace Material: stainless steel A2
Washer DiN 9240 M10, 5 x 30Material: stainless steel A2
Additional Material:
locking nut DiN 985 M10
Mounting rails solidrail FamilyMaterial: Aluminium
rail connector solidrail Family Material: Aluminium
Foot l Anchor PlateMaterial: stainless steel
Multi-Monti self-tapping screw 10 x 85Material: stainless steel A4, Drive: sW 16
rack(l-Profil as support, U-profil as cross beam)
Page 84locking nut M10Material: stainless steel, Drive: sW 18
Page 78Module end clamp standard set
Material: Aluminium
Page 85Allen bolt DiN 912 M8Material: stainless steel, sW: 18 mm
Page 84t-Bolt M10 x 30
Material: stainless steel
¬ K2 N rack Mono system for concrete foundations ¬ installation-friendly due to perfectly coordinated components and system kit (Kit) ¬ Optimised for K2 solidrail Medium and Alpin¬ statically calculated for different european countries ¬ Very attractive price-performance ratio
N-rACk SySTEm mONO
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 55
THE maTErials rEQUirEd
Page 58
Page 59
Mounting rails solidrail Family
Material: Aluminium
rail connector set solidrail Family
Material: Aluminium
Page 84t-Bolt M10 x 30
Material: stainless steel
Page 84
Page 98
Page 83
Page 98
Page 98
Wind Brace Material: stainless steel A2
Washer DiN 9240 M10, 5 x 30Material: stainless steel A2
Foot l Anchor PlateMaterial: stainless steel 1.4301
Multi-Monti self-tapping screw 10 x 85Material: stainless steel A4, Drive: sW 16
rack(l-Profil as support, U-profil as cross beam)
Page 84locking nut M10
Material: stainless steel, Drive: sW 18
Page 80Module end clamp standard set
Material: Aluminium
Page 76
Page 77
Module Middle clamp standard set
Material: Aluminium
Alternatively: Module Middle clamp Xs set
Page 85Allen bolt DiN 912 M8
Material: stainless steel
PrOduCT OvErWiEW
Page 78
Page 84
Page 90
Page 98
Page 68
Page 58Mounting rails
roof Attachments
Mounting Module
screws & Nuts
Accessories
system components
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 57
mOuNTiNG rAiLS
K2 solidrail light 37Article number
P1004367 length 2,10 m
P1000006 length 3,43 m
P1000009 length 4,35 m
P1000012 length 5,40 m
P1000014 length 6,10 m
Quick mounting rail with static confirmation for medium snow zones and long spans.the rail span width amounts to 145 cm at K2 standard conditions.Material: Aluminium eN AW-6063 t66
K2 solidrail Ultralight 32
Aluminum mounting rail with static confirmation for low snow zones and short spans.the rail span width amounts to 130 cm at K2 standard conditions.Material: Aluminium eN AW-6063 t66
Article number
P1001929 length 6,10 m
Article number
P1004368 length 2,10 m
P1000016 length 3,43 m
P1000019 length 4,35 m
P1000022 length 5,40 m
P1000024 length 6,10 m
K2 solidrail Medium 42
Quick mounting rail with static confirmation for medium snow zones and medium spans.the rail span width amounts to 130 cm at K2 standard conditions.Material: Aluminium eN AW-6063 t66
K2 solidrail Alpin 60Article number
P1000028 length 6,10 m
Quick mounting rail with static confirmation for high snow zones and long spans.the rail span width amounts to 260 cm at K2 standard conditions.Material: Aluminium eN AW-6063 t66
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 59
Aluminum rail connector for K2 solidrail Ultralight, light, Medium or Alpin rails. the set consists of: ¬ 1 rail connector, Aluminium ¬ 2 t-Bolts (P1000041), stainless steel ¬ 2 locking nut M10 (P1000042), stainless steel
K2 set rail connectorArticle number
P1004107 For K2 solidrail Ultralight or light, length 200 mm
P1004109 For K2 solidrail Medium or Alpin, length 200 mm
K2 endcap light
K2 endcap Medium
K2 endcap Alpin
K2 end cap for K2 solidrail light Material: glass fibre reinforced polyamid
K2 end cap for K2 solidrail Medium Material: glass fibre reinforced polyamid
K2 end cap for K2 solidrail Alpin Material: glass fibre reinforced polyamid
Article number
P1004765
Article number
P1004766
Article number
P1005053
mOuNTiNG rAiLS
Quick mounting rail with static confirmation. Without side connection, with extra large cable duct. the rail span width amounts to 450 cm at K2 standard conditions. Material: Aluminium eN AW-6063 t66
Aluminum rail connector as connecting element between two K2 solidrail ls. the set consists of: ¬ 1 rail connector solidrail ls (P1001947) ¬ 4 Dimension screws 5.5x25 mm (P1001051), stainless steel
K2 solidrail ls 85
K2 set rail connector solidrail ls
Article number
P1001785 length 6,00 m
Article number
P1004098 length 3,95 mm
K2 solidrail l 85
K2 set rail connector solidrail l
Quick mounting rail with static confirmation. With side connection. the rail span width amounts to 450 cm at K2 standard conditions.Material: Aluminium eN AW-6063 t66
Aluminum rail connector as connecting element between two K2 solidrail l. the set consists of: ¬ 1 rail connector solidrail ls (P1001230) ¬ 4 Dimension screws 5,5x25 mm (P1001051), stainless steel
Article number
P1001226 length 6,00 m
Article number
P1004105 length 395 mm
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 61
K2 solidrail Xl 140
K2 set rail connector solidrail Xl
Quick mounting rail with static confirmation. With side connection. the rail span width amounts to 690 cm at K2 standard conditions. Material: Aluminium eN AW-6063 t66
Aluminum rail connector as connecting element between two K2 solidrail Xl.the set consists of: ¬ 1 rail connector solidrail Xl (P1001049) ¬ 4 selbstbohrende sechskantblechschrauben 5,5x25 mm (P1001051), stainless steel
Article number
P1000983 length 6,00 m
Article number
P1004106 length 395 mm
K2 levelrail 22
K2 set rail connector levelrail
Quick mounting rail for mounting the K2 D-level and s-level system on flat roofs with low load bearing capacity. the extrawide base of the rail provides an additional brought bearing area if required.Material: Aluminium eN AW-6063 t66
Aluminium rail connector as connecting element between two K2 levelrails. the set consists of: ¬ 1 rail connector (P1003845), Aluminium ¬ 2 t-Bolts M8 x 20 (P1002387), stainless steel ¬ 2 locking nut M8 (P1000043), stainless steel
Article number
P1003402 length 5,00 m
Article number
P1004116 length 200 mm
mOuNTiNG rAiLS
Aluminum mounting rail for direct mounting on sheet metal screws with speedclip. the rail span width amounts to 105 cm at K2 standard conditions.Material: Aluminium eN AW-6063 t66
Aluminum mounting rail for direct mounting on sheet metal with speedclip. High ver-sion (cable duct). the rail span width amounts to 150 cm at K2 standard conditions. Material: Aluminium eN AW-6063 t66
rail connector for connecting 2 K2 speedrails. With 3 drill holes for flexible mounting. the set consists of: ¬ 1 speedconnector, Aluminium ¬ 2 countersunk drilling screws, stainless steel with tX 25 bit
Glass fibre reinforced clip for direct mounting the speedrail on sheet metal. Material: glass fibre reinforced polyamid, ePDM please note the aditional Material, for each speedclip you need 2 head steel sheet screws 6x36 mm (Page 79, P1001622).
K2 speedrail 22
K2 speedrail 36
K2 speedconnector set
K2 speedclip
Article number
P1003933 length 2,10 m
P1003379 length 4,20 m
P1001163 length 6,10 m
Article number
P1003380 length 4,20 m
P1002825 length 6,10 m
Article number
P1003571 length: 150 mm
Article number
P1001164 Dimension:
99x25x15 mm
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 63
K2 speedlock set
K2 Flat rail 22
K2 Flatconnector set
“speedlock” mounting security for fusing the K2 speedrail in case of thermal expansion. the set consists of: ¬ 1 speedlock, Aluminium ¬ 1 DiN 7991 hexagon socket countersunk head screw M8 x 20, stainless steel ¬ 1 M K2 slot nut with clip, stainless steel, plastic
Quick mounting rail for direct mounting with sheet metal screws or rivets, or with extra load bearing area for non-penetrating flat roof installation and metal sheeted roofs. the rail span width amounts to 110 cm at K2 standard conditions.Material: Aluminium eN AW-6063 t66
rail connector for connecting 2 K2 speedrails orFlat rail. With 2 drill holes for flexible mounting. the set consists of: ¬ 1 Flatconnector, Aluminium ¬ 2 Allen bolt M8 x 20, stainless steel ¬ 2 Washer M8 ¬ 2 M k2 slot nut with clip, stainless steel
Article number
P1003558 for speedrail 22
P1003560 for speedrail 36
Article number
P1000169 length 6,10 m
Article number
P1006039 length 200 mm
mOuNTiNG rAiLNS
Quick mounting rail with static confirmation for low snow zones and short spans. installed from above using the K2 climber 36/48. suitable as uppermost rail for cross bracing.the rail span width amounts to 160 cm at K2 standard conditions.Material: Aluminium eN AW-6063 t66
Aluminium rail connector as connecting element between two K2 crossrails 36. the set consists of: ¬ 1 rail connector (P1002284), Aluminium ¬ 4 t-Bolts M8 x 20 (P1002387), stainless steel ¬ 4 locking nuts M8 (P1000043), stainless steel
K2 end cap for K2 crossrail 36 Material: glass fibre reinforced polyamid
K2 crossrail 36
K2 set rail connector crossrail 36
K2 endcap crossrail 36
Article number
P1004369 length 2,10 m
P1002933 length 3,40 m
P1002934 length 4,25 m
P1001932 length 6,10 m
Article number
P1002389 length 200 mm
Article number
P1004767
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 65
Quick mounting rail with static confirmation for medium snow zones and short spans. installed from above using the K2 climber 36/48. suitable as uppermost rail for cross bracing. the rail span width amounts to 210 cm at K2 standard conditions Material: Aluminium eN AW-6063 t66
Aluminium rail connector as connecting element between two K2 crossrails 48. the set consists of: ¬ 1 rail connector (P1002285), Aluminium ¬ 4 t-Bolts M10 x 30 (P1000041), stainless steel ¬ 4 locking nut M10 (P1000042), stainless steel
K2 end cap for K2 crossrail 48. Material: glass fibre reinforced polyamid
K2 crossrail 48
K2 set rail connector crossrail 48
K2 endcap crossrail 48
Article number
P1002392 length 200 mm
Article number
P1004768
Article number
P1001980 length 6,10 m
mOuNTiNG rAiLS
Quick mounting rail with static confirmation. With side connection. Mounting from above with K2 climber 62/90. the rail span width amounts to 290 cm at K2 standard conditions. Material: Aluminium eN AW-6063 t66
Aluminium rail connector as connecting element between two K2 crossrails 62. the set consists of: ¬ 1 rail connector (P1002284), Aluminium ¬ 4 Dimension screws, 5,5x25 mm (P1001051), stainless steel
Quick mounting rail with static confirmation. With side connection. Mounting from above with K2 climber 62/90. the rail span width amounts to 450 cm at K2 standard conditions.Material: Aluminium eN AW-6063 t66
Aluminium rail connector as connecting element between two K2 crossrails 90. the set consists of: ¬ 1 rail connector (P1004149), Aluminium ¬ 4 Dimension screws, 5,5x25 mm (P1001051), stainless steel
K2 crossrail 62
K2 set rail connector crossrail 62
K2 crossrail 90
K2 set rail connector crossrail 90
Article number
P1004158 length 395 mm
Article number
P1004126 length 6,10 m
Article number
P1004127 length 6,10 m
Article number
P1004150 length 395 mm
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 67
K2 climber 36/48, aluminium clamp for securing K2 crossrails 36, 48, 62 and 90 or direct mounting of K2 threaded roof hooks or crossHook.Material: Aluminium eN AW 6063 t66
K2 climber set 36/48, aluminium clamp for securing K2 crossrails 36, 48, 62 and 90 or direct mounting of K2 threaded roof hooks or crossHook. the set consists of: ¬ 1 climber 36/48, Aluminium ¬ 1 Allen bolt M8 x 20, stainless steel ¬ 1 Washer M8 ¬ 1 M K2 slot nut with clip, stainless steel und PA
K2 climber 62/90, aluminum clamp for securing K2 crossrails 36, 48, 62 and 90; direct mounting of K2 ground mounted t-rack system.Material: Aluminium eN AW 6063 t66
K2 climber set 62/90, aluminum clamp for securing K2 crossrails 36, 48, 62 and 90; direct mounting of K2 ground mounted t-rack system. the set consists of: ¬ 1 climber 62/90, Aluminium ¬ 1 Allen bolt M8 x 20, stainless steel ¬ 1 Washer M8 ¬ 1 M K2 slot nut with clip, stainless steel und PA
K2 climber 36/48
K2 set climber 36/48
K2 climber 62/90
K2 set climber 62/90
Article number
P1004046 Version
for M8 srew
Article number
P1006042 Version
for M8 srew
Article number
P1002286 slotted versionfor M8 srew
Article number
P1006041 slotted versionfor M8 srew
rOOF ATTAChmENTS
For fastening of K2 system parts on clay brick roofs with pan tile roofing. Bracket with elongated hole to fix the rail with t-Bolt M10.Material: stainless steel (1.4016) welded both sides
K2 roof Fastener for Pan tileArticle number
P1000001
Base plate: 150x60x5 mmBracket: 30x6 mm,
Height under bracket: 47 mm for roof lath 30 mm Height Overall height: ca.133 mm
P1000096
Base plate: 180x80x4 mmBracket: 35x6 mm,
Height under bracket: 38 mm for roof lath 24 mm Height Overall height: ca. 124 mm
P1000386
Base plate: 180x80x4 mmBracket 30x6 mm,
Height under bracket: 42 mm for roof lath 28 mm Height Overall height: ca. 127 mm
P1000002
Base plate: 180x80x4 mmBracket: 30x6 mm,
Height under bracket: 47 mm for roof lath 30 mm Height Overall height: ca. 133 mm
P1000652
Base plate: 180x80x4 mmBracket: 35x6 mm,
Height under bracket: 47 mm for roof lath 30 mm Height Overall height: ca. 150 mm
P1000653
Base plate: 180x80x4 mmBracket: 35x6 mm,
Height under bracket: 38 mm for roof lath 24 mm Height Overall height: ca. 150 mm
P1000260
Base plate: 180x80x4 mm, Bracket: 30x6 mm,
Height under bracket: 57 mm, for roof lath 40 mm Height Overall height: ca.144 mm
P1000764
roof fastener (Alpin)Base plate: 180x80x5 mm, Bracket: 40x8
mm, Height under bracket: 47 mm for roof lath 30 mm Height Overall height: ca.121 mm
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 69
For fastening K2 system parts on clay brick roofs with pan tile roofing. Bracket with M8 thread. Only used together with crossrail. Grooved base plate with chamber for Allen bolt for stepless horizontal adjustment. Height adjustable by grooves and elongated hole in bracket connection. extra light!Material: Aluminium eN AW-6063 t 66
K2 crossHook 1Article number
P1003935
Weight: 450 g, Base plate: 110x110x4-6 mm
Height under bracket: ca. 36-47 mm, Bracket: 35x8,5 mm
Overall height: 121-132 mm
For the fastening of K2 system components on tile roofs with pan tile roofing. Hangers with M8 thread. can only be used with crossrail. Base plate with grooves and chambers for wafer-head screw for infinite horizontal setting. Height adjustable thanks to groov-ing and elongated hole in the bracket connection. Base plate with round elongated hole pattern for screw connection on narrow rafters from 36 mm width. extra light! Material: Aluminium eN AW-6063 t 66
article available 15th april
For the fastening of K2 system components to tile roofs with fast concrete roof tiles, in accordance with Bs eN 490. can only be used with crossrail 36 and 48. Assembly resting on tile without tile recess. Base plate with round elongated hole pattern for screw connection on narrow rafters from 36 mm width. Material: stainless steel (1.4301)
K2 crossHook 1s (roof fastener for narrow rafters)
K2 crossHook 2 (roof for flat concrete interlocing tiles)
Article number
P1005354
Weight: 450 g, Base plate: 110x110x4-6 mm, with round elongated hole,
Height under bracket: ca. 36-47 mm, Bracket: 35x8,5 mm
Overall height: 121-132 mm
Article number
P1004900
Base plate: 150x128x2 mm with round elongated hole
contact area: 150x116 mm Height under bracket: 44 mmOverall height: ca. 100 mm
rOOF ATTAChmENTS
For fastening of K2 system parts on clay brick roofs with pan tile roofing. Bracket with elongated hole to fix the rail with t-Bolt M10.Material: stainless steel (1.4016)
For fastening of K2 system parts on clay brick roofs with pan tile roofing. Bracket with elongated hole to fix the rail with t-Bolt M10.Material: stainless steel (1.4016)
For fastening of K2 system parts on clay brick roofs with coppotiles. Bracket with elongated hole to fix the rail with t-Bolt M10. Material: stainless steel (1.4016)
K2 Vario 1
K2 Vario 2
K2 roof Fastener for coppo-tiles
Article number
P1000125
1. Bracket: min. 55 max. 90 mm, Base plate: 150x60x5 mm, Bracket:30x6 mm, Height under bracket: 43 mm, Overall
height:: ca. 112-145 mm
Article number
P1000107
1. Bracket: min 47 max 59 mm2. Bracket: min 57 max 97 mm
Base plate:140x55x5 mm Bracket: 30x6 mm
Height under bracket: 47-59 mmOverall height: ca. 105-155 mm
Article number
P1001068
1. Bracket: min. 106 max. 136 mm Base plate: 150 x 60 x 5 mm
Bracket: 30 x 5 mm Height under bracket: 18 mm
Overall height:: ca. 137-167 mm
1
2
1
2-step height adjustable roof fastener for the fastening of K2 system components on tile roofs with pan tile roofing. can only be used with crossrail 36 & 48. Base plate with round elongated hole pattern for screw connection on narrow rafters from 36 mm width. Material: stainless steel (1.4301)article available 15th april
K2 Vario 2s (roof fastener for narrow rafters)Article number
P1005710
1. Bracket: min. 49 max. 58,5 mm2. Bracket: min. 59,4 max. 88,4 mm
Base plate: 140 x 114 x 5 mm with round elongated hole, Bracket: 30 x 6 mm Height under bracket: 49 - 58,5 mmOverall height: ca. 118 -156,5 mm
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 71
For fastening of K2 system parts on clay brick roofs with Portoghese-tiles. Bracket with elongated hole to fix the rail with t-Bolt M10. Material: stainless steel (1.4016)
For fastening of K2 system parts on clay brick roofs with spanish tile roof. Bracket with elongated hole to fix the rail with t-Bolt M10.Material: stainless steel (1.4016)
For fastening of K2 system parts on slate roofs. Bracket with elongated hole to fix the rail with t-Bolt M10 and three holes to fix the fastener with countersunk head wood screw. Material: stainless steel A2 (1.4301)
For fastening of K2 system parts on clay brick roofs with spanish tile roof. Bracket with elongated hole to fix the rail with t-Bolt M10.Material: stainless steel (1.4016)
K2 roof Fastner for Portoghese-tiles
K2 roof fastener spanish tile roof, rafters or concrete
K2 roof Fastener slate
K2 roof fastener spanish tile roof, purlins
Article number
P1001067
Base plate: 150 x 60 x 5 mm Height under bracket: 30 mm
Bracket: 30 x 5 mm Overall height: ca.135 mm
Article number
P1001693
Base plate: 150 x 60 x 5 mm Height under bracket: ca: 108 - 137 mm,
Bracket: 35 x 6 mm Overall height: ca. 190 - 220 mm
Article number
P1000373 Bracket: 40 x 250 x 6 mm
Overall height: 70 mm
Article number
P1001694
Base plate: 201 x 50 x 5 mm Height under bracket: ca. 100 - 129 mm,
Bracket: 35 x 6 mm, Overall height: ca. 180 - 210 mm
1
1
rOOF ATTAChmENTS
For fastening of K2 system parts on clay brick roofs with flat tile roofing. Bracket with elongated hole to fix the rail with t-Bolt M10.Material: stainless steel A2 (1.4301)
For fastening of K2 system parts on clay brick roofs with flat tile roofing. Bracket with elongated hole to fix the rail with t-Bolt M10.Material: stainless steel A2 (1.4301)
K2 roof Fastener for Flat tile
K2 roof Fastener for Flat tile (double roofing)
Article number
P1000214Bracket: 40 x 6 mm
Height under bracket: 33 mm Overall height: ca. 122 mm
Article number
P1000074
for 30 mm timber batten (only usable for flat tile Width: 150 mm
Height under bracket: 33 mmOverall height: ca. 103 mm Material thickness: 2 mm
K2 rafter screw, pre-assembled
For fastening of K2 system parts on trapeze and wave shape roofs. the K2 rafter screw is equipped with an extra long metric thread enabling variable height adjustment. the screw is furnished with a hexagonal head, providing time saving installation with a power drill.
the set consists of: ¬ 1 rafter screw ¬ 3 collar nut with riffle, stainless steel ¬ 1 rubber seal, ePDM ¬ 1 Washer, stainless steel ¬ 1Adapter plate with long slot 11 x 39 mm, stainless steel
Article number
P1000057 M10x180, Hexagonal sW 7
P1000062 M10x200, Hexagonal sW 7
P1000065 M10x250, Hexagonal sW 7
P1000066 M12x200, Hexagonal sW 9
P1000376 M12x250, Hexagonal sW 9
P1000067 M12x300, Hexagonal sW 9
P1000355 M12x350, Hexagonal sW 9
P1001179 M12x400, Hexagonal sW 9
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 73
rOOF ATTAChmENTS
solar fastener for steel Ø 8,0 with M10x50 thread, storm washerArticle number
P1001491 8x64 / 50, e16 storm washer, length 114 mm
P1002586 8x80 / 50, e16 storm washer, length 130 mm
P1001636 8x100 / 50, e16 storm washer, length 150 mm
P1001412 8x125 / 50, e16 storm washer, length 175 mm
P1001134 8x150 / 50, e16 storm washer, length 200 mm
P1000666 8x160 / 50, e16 storm washer, length 210 mm
P1001751 8x200 / 50, e16 storm washer, length 250 mm
solar fastener (stainless steel) for mounting K2 system components on roofs with sheet metal or trapeze or wave shaped roofs (for steel substructure) (without adapter plate). Building authority-certified. the head of the bolt has a six lobe drive. M10x70 on request.
the set consists of: ¬ 1 M10 lock nut,, stainless steel ¬ 1 Washer, stainless steel ¬ 1 M10 hexagon nut, stainless steel ¬ 1 sealing washer, stainless steel ¬ 1 storm washer e16, Aluminium
solar panel anchor bolt for steel Ø 8,0 with M10x50 thread, FZD
solar fastener (stainless steel) for mounting K2 system components on roofs with sheet metal or trapeze or wave shaped roofs (for steel substructure) (without adapter plate). Building authority-certified. the head of the bolt has a six lobe drive. M10x70 on request.
the set consists of: ¬ 1 M10 lock nut, stainless steel ¬ 1 Washer, stainless steel ¬ 1 M10 hexagon nut, stainless steel ¬ 1 sealing washer, stainless steel ¬ 1 FZD sealing washer, stainless steel
Article number
P1002218 8x64 / 50, FZD, length 114 mm
P1001435 8x80 / 50, FZD, length 130 mm
P1001400 8x100 / 50, FZD, length 150 mm
P1001459 8x125 / 50, FZD, length 175 mm
P1000985 8x150 / 50, FZD, length 200 mm
P1004095 8x160 / 50, FZD, length 210 mm
P1001838 8x200 / 50, FZD, length 250 mm
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 75
Article number
solar panel anchor bolt for timber Ø 8,0 with M10x50 thread, FZD
solar fastener (stainless steel) for mounting K2 system components on roofs with sheet metal or trapeze or wave shaped roofs (for timber substructure) (without adapter plate). Building authority-certified. the head of the bolt has a six lobe drive. M10x70 on request.
the set consists of: ¬ 1 M10 lock nut, stainless steel ¬ 1 Washer, stainless steel ¬ 1 M10 hexagon nut, stainless steel ¬ 1 sealing washer, stainless steel ¬ 1 FZD sealing washer, stainless steel
Article number
solar fastener for timber Ø 8,0 with M10x50 thread, storm washer
solar fastener (stainless steel) for mounting K2 system components on roofs with sheet metal or trapeze or wave shaped roofs (for timber substructure) (without adapter plate). Building authority-certified. the head of the bolt has a six lobe drive. M10x70 on request.
the set consists of: ¬ 1 M10 lock nut, stainless steel ¬ 1 Washer, stainless steel ¬ 1 M10 hexagon nut, stainless steel ¬ 1 sealing washer, stainless steel ¬ 1 e16 storm washer, Aluminium
rOOF ATTAChmENTS
Article number
Article number
solar panel anchor bolt for concrete/aerated Ø 8,0 with M10x50 thread, storm washer
M8 solar fastener for concrete/aerated concrete Ø 8,0 with M10x50 thread, FZD
solar fastener (stainless steel) for mounting K2 system components on roofs with sheet metal or trapeze or wave shaped roofs (for concrete substructure) (without adapter plate). Building authority-certified. the head of the bolt has a six lobe drive. M10x70 on request.
the set consists of: ¬ 1 M10 lock nut, stainless steel ¬ 1 washer, stainless steel ¬ 1 M10 hexagon nut, stainless steel ¬ 1 sealing washer, stainless steel ¬ 1 e16 storm washer, aluminum ¬ 1 dowel, PA thermoplastic
solar fastener (stainless steel) for mounting K2 system components on roofs with sheet metal or trapeze or wave shaped roofs (for concrete substructure) (without adapter plate). Building authority-certified. the head of the bolt has a six lobe drive. M10x70 on request.
the set consists of: ¬ 1 M10 lock nut, stainless steel ¬ 1 washer, stainless steel ¬ 1 M10 hexagon nut, stainless steel ¬ 1 sealing washer, stainless steel ¬ 1 FZD sealing washer, stainless steel ¬ 1 dowel, PA thermoplastic
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 77
For fastening of K2 system parts on standing seam metal roofs. Material: stainless steel A2
For fastening of K2 system parts on standing seam metal roofs. Other versions available on request.
For fastening of K2 system parts on rounded standing seam metal roofs.
For fastening of K2 system parts on rounded standing seam metal roofs. Other versions available on request.
K2 Metal clamp
s-5! clamp
K2 Kalzip claw
s-5! clamp (Kalzip)
Article number
P1000104 clamp for M10 screw
Article number
P1001052high aluminum alloy for M10 screw
with socket set screw (15-17Nm strenght of torque)
Article number
P1000543for M10 screw
clamp screw: M8 thickness steel plate: 3 mm
Article number
P1000888
two-part-construction part with elongated hole 11x22 for M10 screw high aluminum alloy with
socket set screw (15-17Nm strenght of torque)
mOuNTiNG mOduLE
K2 Module Middle clamp standard black
K2 Module Middle clamp standard
the new middle clamp in modern design can be used for all module frame heights from 25 mm.Material: Aluminium plate finished
the new middle clamp in modern design can be used for all module frame heights from 25 mm.Material: Aluminium black, anodized
Article number
P1005131 for screw M8
Dimension: 65x19x27 mm
Article number
P1005145 for screw M8
Dimension: 65x19x27 mm
Article number
P1005148 34 - 38 mm set module frame height:
stainless steel socket screw M8x30 (P1000086)
P1004197 39 - 43 mm set module frame height:
stainless steel socket screw M8x35 (P1000087)
P1005146 44 - 48 mm set module frame height:
stainless steel socket screw M8x40 (P1000088)
P1005149 49 - 50 mm set module frame height:
stainless steel socket screw M8x45 (P1000089)
K2 Module Middle clamp standard set
For mounting of modules with module frame depths of 30 - 50 mm. the set is preassembled and can be easily mounted with every K2 rail. M K2 insert nuts are self-locking and can be moved by applying light pressure to the stainless steel screw in the rail.
On request available in black (anodized) available. the additional cost per piece is 0,20 €.
Middle clamp set, consisting of: ¬ 1 aluminium middle clamp, cold pressed (P1005131) ¬ 1 stainless steel socket screw ¬ 1 M K2 insert nut M8, stainless steel (P1001643) ¬ 1 securing washer s8. stainless steel (P1000473) ¬ 1 spring (P1002497)
For module frame height 30 - 33mm on request.
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 79
Article number
P1003586 34 - 38 mm set module frame height:
stainless steelschraube M8x55 (P1000552)
P1004908 39 - 43 mm set module frame height:
stainless steelschraube M8x60 (P1000402)
P1005143 44 - 48 mm set module frame height:
stainless steelschraube M8x65 (P1000091)
P1004407 49 - 50 mm set module frame height:
stainless steelschraube M8x70 (P1000255)
For mounting of modules with module frame depths of 30 - 50 mm.
the set is preassembled and can be easily mounted with every K2 rail. M K2 insert nuts are self-locking and can be moved by applying light pressure to the stainless steel screw in the rail.
On request available in black (anodized) available. the additional cost per piece is 0,20 €.
Middle clamp xs set, consisting of: ¬ 1 aluminium middle clamp xs, cold presses (P1001892) ¬ 1 stainless steel socket screw ¬ 1 M K2 insert nut M8, stainless steel (P1001643) ¬ 1 securing washer s8. stainless steel (P1000473)
For module frame height 30 - 33 mm on request.
Middle clamp for all module frame heights from 15 mm. Width between modules: 13 mm.Material: Aluminium plate finished
K2 Module Middle clamp XsArticle number
P1001892 for screw M8
Aluminium plate finished
P1002062 for screw M8 black (anodised)
K2 Module Middle clamp Xs set
mOuNTiNG mOduLE
K2 Module Middle clamp First solar
K2 Module Middle clamp laminat
Aluminum module laminate middle clamps. ePDM allowed for First solar and calyxo thinfilm modules. smaller module spacing.Material: Aluminium plate finished, ePDM
Aluminum module laminate clamps. ePDM allowed for First solar and calyxo thinfilm modules and modules 6 - 9 mm.Material: Aluminium plate finished, ePDM
Article number
P1003157
Article number
P1000667
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 81
K2 Module end clamp standard
end clamp in new, modern design, made from plate finished aluminium for safe fastening of solar modules to K2 rails. Bore hole: ø 8,3 mm for screw M8, width: 65 mm. Material: plate finished aluminium.
For module frame height 30 - 33 mm on request.
Article number
P1004414 for module frame height 34 - 36 mm
P1004420 for module frame height 37 - 38 mm
P1004415 for module frame height 39 - 41 mm
P1004421 for module frame height 42 - 44 mm
P1004416 for module frame height 45 - 47 mm
P1004422 for module frame height 48 mm
P1004417 for module frame height 49 - 50 mm
K2 Module end clamp standard black
end clamp in new, modern design, made from plate finished aluminium for safe fasten-ing of solar modules to K2 rails. Bore hole: ø 8,3 mm for screw M8, width: 65 mm Material: plate finished aluminium, black, anodized
For module frame height 30 - 33 mm on request.
Article number
P1004555 for module frame height 34 - 36 mm
P1004556 for module frame height 37 - 38 mm
P1004557 for module frame height 39 - 41 mm
P1004558 for module frame height 42 - 44 mm
P1004559 for module frame height 45 - 47 mm
P1004560 for module frame height 48 mm
P1004561 for module frame height 49 - 50 mm
mOuNTiNG mOduLE
K2 set Module end clamp standard
For mounting of modules with module frame depths of 30 - 50 mm.
the set is preassembled and can be easily mounted with every K2 rail. M K2 insert nuts are self-locking and can be moved by applying light pressure to the stainless steel screw in the rail.
On request available in black (anodized) available. the additional cost per piece is 0,20 €.
end clamp set standard, consisting of: ¬ 1 aluminium end clamp (cold pressed) ¬ 1 stainless steel socket screw ¬ 1 M K2 insert nut M8 (stainless steel) ¬ 1 s8 lock washer ¬ 1 spring (stainless steel)
For module frame height 30 - 33 mm on request.
Article number
P100516934 - 36 mm module frame height:
end clamp (P1004414), stainless steel socket screw M8x30 (P1000086)
P100529037 - 38 mm set module frame height:
end clamp (P1004420), stainless steel socket screw M8x30 (P1000086)
P100517039 - 41 mm set module frame height:
end clamp (P1004415), stainless steel socket screw M8x35 (P1000087)
P100529142 - 44 mm set module frame height:
end clamp (P1004421), stainless steel socket screw M8x35 (P1000087)
P100517145 - 47 mm set module frame height:
end clamp (P1004416), stainless steel socket screw M8x40 (P1000088)
P100529248 mm set module frame height:
end clamp (P1004422), stainless steel socket screw M8x40 (P1000088)
P100517249 - 50 mm set module frame height:
end clamp (P1004417), stainless steel socket screw M8x45 (P1000089)
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 83
K2 slideGuard
K2 Module end clamp First solar
K2 Module end clamp laminat
end clamp First solar for fixing thinfilm modules, approved for First solar and calyxo thinfilm modules.Material: Aluminium plate finished, ePDM
Aluminum module laminate end clamp allowed for First solar and calyxo thinfilm modules and modules 6 - 9 mm.Material: Aluminium plate finished, ePDM
slide guard for additional use in vertical assembly of laminated modules with glass thickness of 6 - 9 mm. Material: stainless steel 1.4016, ePDM
Article number
P1003158
Article number
P1000668 clampdistance 6 - 9 mm
Article number
P1005828 Dimension:
330x50x19 mm
SCrEWS & NuTS
self-drilling wood screw, Heco. For mounting on tOP-roof-insulation. the counterbatten is fixed through a subhead thread. Building authority-certified.Material: stainless steel A2
self-drilling wood screw, Heco. Building authority-certified. Material: stainless steel A2
self-drilling wood screw with countersunk head, Heco. Building authority-certified. Material: stainless steel
K2 self-drilling timber screw, round head, 2 threads, stainless steel
K2 self-drilling wood screw, stainless steel
K2 self-drilling wood screw, stainless steel with countersunk head
Article number unit*
P1003437 Dimension: 8x240 50
P1003438 Dimension: 8x300 50
P1003439 Dimension: 8x360 50
Article number unit*
P1004443 Dimension: 6x120 100
P1001607 Dimension: 6x160 100
Article number unit*
P10058378 Dimension: 6x80 50
P1000642 Dimension: 8x80 50
P1000656 Dimension: 8x100 50
P1001525 Dimension: 8x120 50
P1002366 Dimension: 8x160 50
P1002367 Dimension: 8x180 50
the Fast-installation M K2 slot nut can be put into the K2 rail everywhere. the slot nut will adjust itself in the the rail and can be readjusted to every place of the rail Material: stainless steel 1.4301
M K2 slot nut with clip, stainless steelArticle number
P1001643 thread of screw: M8
*sold only in units
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 85
to connect the solidrail l / Xl (4 pieces for each solid connection). Material: stainless steel A2
Usable for steel sheeting minimum 0.60 mm thickness and for aluminium minimum 1 mm thickness.Material: stainless steel A2, ePDM
to connect the glas fiber clip of the flat rail usable for steel sheeting minimum 0.60 mm thickness and for aluminium minimum 1 mm thickness.Material: stainless steel A2, ePDM
‘Multi Monti’ - fastner (Heco) ss to fasten in concrete. steel surface: galvanised and blue passivated. Drive t30, head size: 17 mm Drilling measurement: 6mm
K2 self-tapping screw without mounted ePDM supported washer DiN 7504
K2 self-tapping screw with mounted ePDM supported washer
K2 self-tapping screw with mounted ePDM supported washer
K2 Multi Monti fastener
Article number unit*
P1001051Drive: hexagonal sW 8 Dimension: 5,5x25 mm
strenght of torque: 5 Nm 500
Article number unit*
P1000212Drive: hexagonal sW8 Dimension: 6x25 mm
ePDM support: Ø16 mm 500
Article number unit*
P1001622
Drive: hexagonal sW 8 Dimension: 6x36 mm
strenght of torque: 5 Nm ePDM support: Ø16 mm 500
Article number unit*
P1000802 Dimension: 7,5x50
MMs-Ms 100
SCrEWS & NuTS
t-bolt to be placed anywhere into the c-cell of the rail. it can be placed and readjusted to any place of the rail.Head form: 28/15 with four cornered shaft Head dimensions: 22,5x10,5x4 mm Material: stainless steel A2 (1.4301)
the locking splines prevent accidental release. Material: stainless steel A2
K2 t-Bolt 28/15
K2 Hexagon flange nut with serration, DiN 6923
Article number unit*
P1000637 thread of screw: M10x20 mm 100
P1000571 thread of screw: M10x25 mm 100
P1000041 thread of screw: M10x30 mm 100
P1000441 thread of screw: M10x40 mm 100
P1000407 thread of screw: M10x50 mm 100
P1000077 thread of screw: M10x60 mm 100
P1000649 thread of screw: M10x70 mm 100
P1000277 thread of screw: M10x80 mm 100
P1000614 thread of screw: M8x20 mm 100
P1000368 thread of screw: M8x30 mm 100
Article number unit*
P1000043 thread of screw: M8 100
P1000042 thread of screw: M10 100
P1000044 thread of screw: M12 100
Material: stainless steel A2
K2 Washer (body washer), stainless steelArticle number unit*
P1000620 Ø 15 x 8,4 x 1,6 mm 200
P1000122 Ø 20 x 8,4 x 1,5 mm 200
P1000052 Ø 25 x 6,4 x 1,5 mm 200
P1000121 Ø 25 x 8,4 x 1,5 mm 200
P1000063 Ø 30 x 10,5 x 1,5 mm 200
P1000064 Ø 30 x 12,5 x 1,5 mm 200
*sold only in units
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 87
Material: stainless steel A2
lock washer for bolted connections.Material: stainless steel A2 1.4301
K2 Allen bolt, DiN 912 - eN isO 4762
K2 lock washer DiN eN 10151Article number unit*
P1000473 Dimension: s8
13,00 x 8,4 x 0,8 mm 200
Article number unit* Price/unit
P1000488 Dimension: M8x10, sW 6 200
P1000085 Dimension: M8x16, sW 6 200
P1000190 Dimension: M8x20, sW 6 200
P1000191 Dimension: M8x25, sW 6 200
P1000086 Dimension: M8x30, sW 6 200
P1000087 Dimension: M8x35, sW 6 200
P1000088 Dimension: M8x40, sW 6 200
P1000089 Dimension: M8x45, sW 6 100
P1000090 Dimension: M8x50, sW 6 100
P1000552 Dimension: M8x55, sW 6 100
P1000402 Dimension: M8x60, sW 6 100
P1000091 Dimension: M8x65, sW 6 100
P1000255 Dimension: M8x70, sW 6 100
P1000399 Dimension: M8x80, sW 6 100
P1000400 Dimension: M8x100, sW 6 100
P1000093 Dimension: M10x20, sW 8 100
P1000108 Dimension: M10x25, sW 8 100
Washer with sealing ring for the waterproofing of round head screw 8. Material: stainless steel A2, ePDM
K2 sealing washer, stainless steelArticle number unit*
P1001501 Ø 8,4 x 19 mm 200
SCrEWS & NuTS
K2 Hanger Bolt
the K2 hanger bolt is equipped with an extra long metric thread enabling variable height adjustment.the screw is furnished with a hexagonal head, providing time saving installation with a power drill.Material: stainless steel A2
Article number
P1000056 M10x180, Hexagonal sW 7
P1000059 M10x200, Hexagonal sW 7
P1000060 M10x250, Hexagonal sW 7
P1000061 M12x200, Hexagonal sW 9
P1000375 M12x250, Hexagonal sW 9
P1000068 M12x300, Hexagonal sW 9
P1000383 M12x350, Hexagonal sW 9
P1000839 M12x400, Hexagonal sW 9
Usable for steel sheeting minimum 0.63 mm thickness and for aluminium minimum 1 mm thickness.Material: Aluminium, stainless steel
K2 Blind rivet (Alu-cAP ø 4,8 mushroom-head)
Article number
P1000385 Ø 4,8 x 11 mm
clamp distance: 5,0 - 6,5 mm
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 89
screw to prevent the theft of modules. the patented head can only be removed with the respective Deter Bolt Wrench.
special tool for safety screw Deter Bolt Free.
K2 safety screw Deter Bolt Free
Deter Bolt Wrench for safety screw Deter Bolt Free
Article number
P1004784 M8 x 30
P1004750 M8 x 35
P1004785 M8 x 40
P1004615 M8 x 45
P1004786 M8 x 50
Article number
P1004738 M8 x 30
K2 Blind rivet (Alu-cAP ø 4,8 mushroom-head)
ACCESSOriES
the K2 AddOn mounting adapter enables the grid mounting or insertion mounting possibility without any additional rails or clamps. Fits with all K2 systems mounting systems.Material: glass fibre reinforced polyamid
K2 AddOnArticle number
P1002792 suitable forall K2 rails
PA spacer shim to compensate height differences on mounting K2 threaded roof hooks and K2 rails (except solid). Any number of spacer shims can placed on top of each other for individual height compensation.Material: glass fibre reinforced polyamid
K2 Pad spacer PAArticle number
P1002361 Material thickness: 2 mm
Glass fibre reinforced clip for direct mounting the speedrail on sheet metal. Material: glass fibre reinforced polyamid, ePDM please note the aditional Material, for each speedclip you need 2 head steel sheet screws 6x36 mm (Page 79, P1001622).
K2 speedclip
K2 speedlock set
“speedlock” mounting security for fusing the K2 speedrail in case of thermal expansion. the set consists of: ¬ 1 speedlock, Aluminium ¬ 1 DiN 7991 hexagon socket countersunk head screw M8 x 20, stainless steel ¬ 1 M K2 slot nut with clip, stainless steel, plastic
Article number
P1003558 for speedrail 22
P1003560 for speedrail 36
Article number
P1001164 Dimension:
99x25x15 mm
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 91
K2 climber 36/48, aluminium clamp for securing K2 crossrails 36, 48, 62 and 90 or direct mounting of K2 threaded roof hooks or crossHook.Material: Aluminium eN AW 6063 t66
K2 climber set 36/48, aluminium clamp for securing K2 crossrails 36, 48, 62 and 90 or direct mounting of K2 threaded roof hooks or crossHook. the set consists of: ¬ 1 climber 36/48, Aluminium ¬ 1 Allen bolt M8 x 20, stainless steel ¬ 1 Washer M8 ¬ 1 M K2 slot nut with clip, stainless steel und PA
K2 climber 62/90, aluminum clamp for securing K2 crossrails 36, 48, 62 and 90; direct mounting of K2 ground mounted t-rack system.Material: Aluminium eN AW 6063 t66
K2 climber set 62/90, aluminum clamp for securing K2 crossrails 36, 48, 62 and 90; direct mounting of K2 ground mounted t-rack system. the set consists of: ¬ 1 climber 62/90, Aluminium ¬ 1 Allen bolt M8 x 20, stainless steel ¬ 1 Washer M8 ¬ 1 M K2 slot nut with clip, stainless steel und PA
K2 climber 36/48
K2 set climber 36/48
K2 climber 62/90
K2 set climber 62/90
Article number
P1004046 Version
for M8 srew
Article number
P1006042 Version
for M8 srew
Article number
P1002286 slotted versionfor M8 srew
Article number
P1006041 slotted versionfor M8 srew
ACCESSOriES
the K2 building protection mat protects the roof sealing from damage by mounting system platforms. the aluminium coating on the underside counteracts the otherwise occurring plasticizer loss of many roof sealers that do not tolerate rubber.
Mounting solar panels on flatroofs with gravel.
K2 solar building protection mat
K2 mounting solar panels
Article number
P1005118 Dimensions: 1200x200x6 mm
P1005120 Dimensions: 1200x200x20 mm
Article number
P1000092 Dimensions: 1200x800 mm
Weight: 7,5 kg
P1001572 Dimensions: 600x800 mm
Weight: 3 kg
WeeB clip – potential equalization between panel and rail, suitable for K2 solidrail Ultralight, light, speedrail 22 & 36, crossrail 36 & 48 and Flatrails.Material: stainless steel
K2 WeeB clipArticle number
P1001695 for each panel 2 WeeB clips
K2 BridgeArticle number
through use of the K2 Bridge, greater span widths can be achieved with hanger bolts and mounted solar installations.Other versions available on demand.
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 93
K2 lightning protection clamp Material: stainless steel
lightning protection clamp for clamping Ø 8mm lightning protection cables. For universal use as a t, cross, parallel and impact clamp.Material: Aluminium
Additional Material for hammer-head grooves: ¬ 1 hammer-head screw M10 x 30 (P1000041) ¬ 1 locking nut M10 (P1000042)
Additional Material for rail head cavity: ¬ 1 M K2 slot nut (P1001643) ¬ 1 Allen bolt M8 x 30 (P1000086) ¬ 1 Washer 8,4 x 20 x 1,2 mm (P1000122)
K2 lightning protection clamp
K2 lightning protection clamp multi, half part
Article number
P1000487
Article number
P1003151
ACCESSOriES
stainless steel angle bracket for rail cross connection to a 90° angle. constructions suitable for K2 solidrails light, Medium and Alpin. the set consists of: ¬ 1 angle bracket, stainless steel ¬ 1 t-bolt M10, stainless steel ¬ 1 locking nut M10,stainless steel ¬ 1 Allen bolt M8, stainless steel ¬ 1 M K2 slot nut M8, stainless steel ¬ 1 lock Washer s8, stainless steel
stainless steel adapter plate for screws M10 and M12 Material:stainless steel
Material: Aluminium
spacer in G-shape to compensate for height differences in the assembly of K2 rails on respective roof attachments. Material: Aluminium
K2 set Angle bracket
K2 Adapter plate
K2 Underlay plate
K2 regulator disks (G-shape)
Article number
P1000058 for screws M10
Dimensions 30x80x5 mm
P1000069 for screws M12
Dimensions 30x80x5 mm
Article number
P1004110 Dimensions: 70x70x3 mm
Article number
P1000789 Dim. 4x50x100 mmØ drill hole: 9 mm
Article number
P1000005 Material thickness:
2 mm
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 95
external cable clip for solar cables setting by t-bolt in the c-cell. Material: polyamid, black
external cable clip of solar cables for cable runs outside of K2 rails. Fixation in the c-chamber of the profile.Material: Polypropylen with UV stabiliser, black
K2 external cable clip
K2 Omega Kabel-clip
Article number
P1000265
Article number unit
P1005394 100
ePDM Hanger bolt seal for screw M10 or M12
K2 ePDM Hanger bolt sealArticle number
P1000164compatible for M10
Ø inside: 7,4 mm Ø outside: 25 mm
P1000671compatible for M12
Ø inside: 9,4 mm Ø outside: 25 mm
ePDM-sealing strip, one-sided self-adhesive
K2 ePDM-sealing stripArticle number
P1000105 10 m roll, black,
Dimensions: 30 x 3 mm
ACCESSOriES
K2 endcap light
K2 endcap Medium
K2 endcap Alpin
K2 end cap for K2 solidrail light Material: glass fibre reinforced polyamid
K2 end cap for K2 solidrail Medium Material: glass fibre reinforced polyamid
K2 end cap for K2 solidrail Alpin Material: glass fibre reinforced polyamid
Article number
P1004765
Article number
P1004766
Article number
P1005053
K2 end cap for K2 crossrail 36 Material: glass fibre reinforced polyamid
K2 endcap crossrail 36Article number
P1004767
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 97
K2 end cap for K2 crossrail 48 Materi-al: fjkgldfjgkjdfl
K2 endcap crossrail 48Article number
P1004768
twist drill for pilot drilling in steel substructure for using solar fasteners. Material: High speed steel (Hss)
Article number Price/Piece
P1004048 sD Hss 6,8X175-30 twist drill for flange thickness 1,5 - 4,9 mm
P1004050 sD Hss 7,0X175-30 twist drill for flange thickness 5,0 - 7,4 mm
P1004051 sD Hss 7,2X175-30 twist drill for flange thickness 7,5 - 9,9 mm
P1004052 sD Hss 7,4X175-30 twist drill for flange thickness > 10,0 mm
P1004015 sD Hss 6,8X225-30 twist drill for flange thickness 1,5 - 4,9 mm
P1004053 sD Hss 7,0X225-30 twist drill for flange thickness 5,0 - 7,4 mm
P1004054 sD Hss 7,2X225-30 twist drill for flange thickness 7,5 - 9,9 mm
P1004055 sD Hss 7,4X225-30 twist drill for flange thickness > 10,0 mm
twist drill for solar fastener
SySTEm COmPONENTS
K2 s-level set
K2 triangle, pre-assembledArticle number
Article number
Article number
Mounting triangle, optimised by project-specific customisation. Universal use with ballast or roof penetration.Material: Aluminium
Pre-assembled mounting triangle for K2 s-level system, installation - friendly thanks to partially pre-assembled components.
the set consists of: ¬ Mounting triangle ¬ 2 x climber 36/48 ¬ 2 x t-Bolt M8 x 20 ¬ 4 x Allen bolt M8 x 25 ¬ 6 x locking nut M8 ¬ 4 x lock washer
Pre-assembled mounting system for K2 D-level system, installtation - friendly thanks to partially pre-assembled components.
the set consists of: ¬ Flat support ¬ l-profile as support ¬ Allen bolt M8 DiN 912 ¬ t-Bolts M8 x 20 ¬ locking nutn M8
D-level Flatroof set
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 99
K2 s-level WindbreakerArticle number
Article number
K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 s-level system (increase downforce). For module lengths from 158 cm to 167 cm. Material: Aluminium
Double support for taking up of ballast. suitable for K2 s- and D-level system. locking mechanism with base rail speedrail Flatrail. Material: Aluminium
the set consists of: ¬ scale ¬ M K2 ¬ Allen bolt M8x20 ¬ lock washer
K2 scale set
SySTEm COmPONENTS
K2 rack N
Foot l Anchor Plate
Wind Brace
lock Nut DiN 985 M10Article number
Article number
Article number
Article number
lock nut for fittings. With integrated plastic ring, alternative screw locking device to the locking nut.Material: stainless steel beschichtet
Anchor plate for K2 Foot l for the fastening of the K2 N-rack to the concrete foundation. Material: stainless steel 1.4301
statically optimised rack for screw foundation or concrete foundation. suitable for K2 N-rack system. l-Profile as supports, U-Profile or crossrail 62 as transverse carrier. Material: Aluminium
Wind brace for the bracing of the K2 N-rack system racks. Material: stainless steel A2 Alternatively: catenae
GENErAL
mounting rails
roof attachments
mounting module
screws & nuts
system components
accessories
pitched roof systems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 101
screw Foundation
K2 Adapter tube
K2 crossAngleArticle number
Article number
Article number
Aluminium angle to compensate for the east-West gradient in K2 N-rack and t-rack 2.11 system and for the connection of the upper belt.Material: Aluminium eN AW-6063 t66
Adapter tube fpr connection to K2 screw foundations with height adjustment, length: 0,4 m Material: galvanized steel
screw foundation for the fastening of the K2 N-rack system in almost all soil classes. Available in different designs, project-specific.Material: galvanised steel
SySTEm COmPONENTS
K2 ram post iPe 100
K2 rack-Head
K2 l-Angle 60 x 31 x 6
K2 rack Fork
Article number
Article number
Article number
Article number
screw foundation for the fastening of the K2 t-rack system in almost all soil classes. Available in different designs, project-specific.Material: galvanized steel
t-rack Head for the fastening of the t-rack bolt at the appropriate angle. With the hole pattern for system-height compensation.Material: galvanized steel
l-angle for the connecting of the l-braces to the t-rack 2.11 ram posts. With hole pattern for system-height compensation.Material: galvanized steel
connecting element between t-rack carrier and l-braces. Material: Aluminium
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 103
GENErAL CONdiTiONS OF SErviCE OF k2 SySTEmS GmBh § 1 Scope (1) Unless explicitly agreed otherwise in writing, these general conditions of service (General Conditions of Service) shall apply to all contracts regarding our deliveries and services conclu-ded by us with a customer as well as pre-existing contractual obligations in this regard. Other terms and conditions or purchasing terms shall not become the content of the contract, even if we do not explicitly contradict them. This shall also apply if we perform our services to the customer without any reservation in awareness of contrary or deviating terms and conditions or these are referred to in individual correspondence. (2) Even if not explicitly referred to once again when similar contracts are concluded in ongoing business relations, our General Conditions of Service shall apply exclusively in the same version as those which can be downloaded by the customer from (http://www.k2-systems.de/english/gcs/) when placing an order, unless explicitly agreed otherwise in writing between the contrac-tual parties. The latest printed version of the General Conditions of Service will be sent to the customer free of charge upon request. (3) These General Conditions of Service shall not apply in relation to consumers as defined by Section 13 of the German Civil Code [Bürgerliches Gesetzbuch (BGB)].
§ 2 Conclusion of Contract, Offer Documents (1) Our offers are subject to confirmation and non-binding, unless the offer is declared in writing to be binding. The customer shall be bound by statements in connection with the con-clusion of a contract (contractual offers) for two weeks. (2) A legally binding relationship shall only come into existence through a contract signed by both contractual parties or through our written confirmation of the order, and moreover through commencement of the performance of contractual services by us. We may demand written confirmations of the customer’s verbal declarations of willingness to enter into a con-tract.(3) We reserve property rights and copyrights to illustrations, drawings, calculations, tools and other documents. This also applies to written documents which are designated as “confiden-tial”. The customer shall require our express written consent before passing these on to third parties or their use for third parties.
§ 3 Subject Matter of the Contract, Warranties, Modifications to Services (1) The scope, type and quality of the deliveries and services shall be determined by the contract signed by both parties or by our confirmation of the order or otherwise by our offer. Other information or requirements shall only become an integral part of the contract if this is agreed in writing by the contractual parties or we have confirmed them in writing. Any subsequent modifications to the scope of services shall require written agreement or our express written confirmation.(2) Product descriptions, illustrations and technical data are specifications of services, but do not constitute warranties. Any warranty must be explicitly stated as such in writing. Where warranties are mentioned in offers, these are exclusively our product warranties, which must be concluded directly with us. Drawings, illustrations, measures, weights or other service data shall only be binding if this is explicitly agreed in writing. (3) We reserve the right to make minor modifications to services, insofar as these modifications are of a minor nature, which can be reasonably imposed on the customer. In particular, the customer must accept any commercially customary deviations in quality, quantity, weight or other deviations even if it refers to brochures, illustrations or pictures when placing an order, unless these are explicitly agreed upon as a binding property.
§ 4 Time of Performance, Delays, Partial Performances, Place of Perfor-mance(1) Any information about times of delivery and performance shall be non-binding, unless refer-red to as binding by us in writing. All delivery and performance periods shall be conditional on correct and punctual availability of supplies and raw materials. Delivery periods shall commence upon the sending of the confirmation of the order by us, but not before all commercial and technical matters between the customer and ourselves have been clarified and the customer has fulfilled all duties incumbent on it (e.g. provision of all necessary official authorisations or payment of agreed down payments).(2) Delivery and performance periods shall be extended by the period in which the customer is in default of payment under the terms of the contract and by the period in which we are prevented from performing the delivery or service through circumstances for which we are not responsible, and by a reasonable run-up period after the end of the reason for the delay. These circumstances shall include force majeure, shortage of raw materials at relevant commo-dity markets, any delays caused by our suppliers and industrial disputes. Periods shall also be considered to be prolonged by any such time in which the customer breaches the contract by failing to meet its obligations to cooperate, e.g. by not providing information, supplies or staff. (3) If the contractual parties subsequently agree to perform different or additional services affecting the agreed periods, these periods shall be prolonged by a reasonable period.
(4) If a postponement of delivery or performance dates is agreed at the customer’s request, we shall be entitled to demand the remuneration at the time at which it would have been due without the postponement. The agreement on the postponement of such dates must be recorded in writing.(5) Any reminders or setting of deadlines on the part of the customer shall only be valid if re-corded in writing. A period of grace must be reasonable. A period of less than two weeks shall only be reasonable in cases of urgent necessity.(6) We are entitled to perform partial services, inasmuch as the delivered parts can be reaso-nably used by the customer. We reserve the right to deliver excess or short supplies of up to 5 % of the scope of delivery.(7) Agreed delivery dates shall be considered as having been complied with as soon as the goods have been handed over to the transport company on the agreed delivery date or as soon as we have given notice of their actual readiness for shipment.(8) If our component supplier (definitively) fails to supply to us although we have taken due care in selecting such supplier and the order satisfies the requirements applicable under our obligation to supply, we shall be entitled to full or partial withdrawal in relation to the custo-mer, if we notify the customer of the failure of the supply to us and – where admissible – offer the assignment of the claims to which we are entitled against the component supplier to the customer. When selecting our supplier, we shall not be liable for slightly negligent fault in the selection (culpa in eligendo).(9) Unless otherwise stated or agreed, the place of performance of the service shall be our registered office.
§ 5 Packaging, Shipment, Passing of Risk, Insurance(1) The risk is transferred to the customer as soon as the product has left our factory or distribu-tion centre. This also applies to partial deliveries, deliveries in connection with supplementary performance and if we undertake further services, such as especially any shipping charges or delivery. If a contract for work exists which requires acceptance, risk is transferred upon acceptance.(2) We shall select the mode of shipment, the carrier and transport route, unless we have recei-ved other written specifications by the customer. With regard to this selection, we shall only be liable for intent or gross negligence.(3) At the customer’s express request, the goods delivered shall be insured against the risks identified by the customer at its expense, inasmuch as this is feasible with reasonable time and effort for us.
§ 6 Prices, Remuneration, Payment, Set-Off(1) Unless otherwise agreed upon by the contractual parties, all prices are valid ex works. All prices and remuneration are quoted in euros plus the applicable value added tax and other statutory charges applicable in the country of delivery, as well as plus transportation costs, expenses, packaging, shipment and, if applicable, insurance of goods in transit. Any additional services requested by the customer shall be invoiced on a time and material basis.(2) Subject to para. 6, the contractually agreed prices in each case must be paid. Services shall be charged according to expenditure.(3) Our goods shall in principle only be shipped against prepayment by bank transfer. The cus-tomer undertakes to pay the price for our deliveries and services immediately after conclusion of the contract, unless otherwise agreed. Unless, exceptionally, payment in advance is agreed and unless otherwise agreed by the contractual parties, payments are due without discount immediately after performance of the service and customer’s receipt of the invoice and payable within 14 days.(4) Unless specially agreed otherwise, we only accept non-cash payments, i.e. transfers to our bank account indicated in the contract documents. Bills of exchange and cheques shall in principle not be accepted, and if at all only in lieu of payment. The customer must pay the bill of exchange and cash discount charges incurred as well as the collection charges. These are due immediately. We shall not be liable for timely collection or timely protest if we are only responsible for slight negligence in this regard.(5) If the customer is in default of payment, it shall be required to pay interest at the rate of eight percentage points above the relevant applicable base interest rate. This shall not affect the right to assert for further damage caused by the delay.(6) If the customer is in default of payment for longer than 30 calendar days, bills of exchange or cheques are protested or if insolvency proceedings or comparable proceedings under other legal systems are filed against the customer’s assets, we shall be entitled to immediately call all accounts receivable against the customer due and payable, withhold all deliveries and services, and assert all reservations of proprietary rights. (7) The customer shall only be entitled to set off our claims against claims undisputed by us or recognised by declaratory judgment. Apart from Section 354 a HGB (German Commercial Code), the customer shall be entitled to assign rights to a third party only after our prior written confirmation. The customer shall only have a right of retention or the defence of non-performance within the respective contractual relationship.
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 105
GENErAL CONdiTiONS OF SErviCE OF k2 SySTEmS GmBh (8) Circumstances which occur after conclusion of the contract and which influence the calculation basis unforeseeably to a significant extent and are beyond our sphere of con-trol shall entitle us to adjust the agreed price in an amount exclusively taking into account these circumstances. This especially applies to legislative amendments, official measures, price increases of our primary suppliers and currency fluctuations. The price adjusted on this basis is based on the same calculation basis as the originally agreed price and may not be used to increase the profit.(9) If we receive unfavourable information about the customer’s financial circumstances or credit standing, unless, exceptionally, payment in advance must be made anyway - we may make the processing and delivery dependent on a reasonable down payment by the customer or on the provision of security through a deposit or a bank guarantee.
§ 7 Retention of Title (1) Our services remain our property until full payment of all claims against the customer to which we are entitled from the business relationship. These claims shall also include drafts and bills of exchange receivable as well as current account receivables.(2) The customer is obliged to treat the goods that are subject to retention of title care-fully for the period of retention of title. It is also obliged to insure the goods sufficiently at the reinstatement value against damage caused by fire, water and theft at its own expense. The customer hereby assigns to us already any claims for damages arising from this insurance. We hereby accept the assignment. If the assignment is not permissible, the customer shall hereby irrevocably instruct its insurance company to effect any payments solely to us. This shall not affect any further claims that we may have. Upon our request, the customer must furnish documentary proof to us that it has taken out insurance. (3) The customer is only permitted to sell the goods subject to retention of title in the regu-lar course of business. The customer is not entitled to pledge the goods subject to retenti-on of title, transfer them by way of security or make other arrangements that prejudice our ownership. In the event of seizures or other infringements by third parties, the customer is obliged to inform us immediately in writing and provide all necessary information, inform the third party about our ownership rights and assist us in our activities to protect the goods subject to retention of title. The customer shall bear any costs incurred by it, which may be due in order to cancel access to the goods or replace the goods, insofar as these costs cannot be recovered from a third party. (4) The customer hereby assigns to us already all outstanding debts from resale of the goods and all ancillary rights, regardless of whether the goods subject to retention of title were resold without or after processing. We hereby accept this assignment already now. If an assignment is not admissible, the customer hereby irrevocably instructs the garnishee to effect any payments solely to us. The customer is revocably authorised to collect the debts assigned to us in a fiduciary capacity. The amount collected shall be paid to us im-mediately. We are entitled to revoke the customer’s authorisation to collect the amounts due as well as the customer’s authorisation to resell the goods, if the customer does not meet its payment obligations towards us in proper form, if it is in default of payment, if it ceases payment or if insolvency proceedings are filed regarding the customer’s assets. A resale of claims shall require our prior consent. The customer’s collection authorisation shall expire upon notice of the assignment to the garnishee. If the collection authorisation is withdrawn, we shall be entitled to demand from the customer to notify the assigned debts and their debtors, provide all information required, hand out the associated docu-ments and inform the obligors of the assignment.(5) In case the customer’s debts from the re-sale are transferred to a current account, the customer hereby also assigns its claim against its customer from the current account already to us, and namely in the amount of the purchase price of the goods resold subject to retention of title including VAT. (6) If we assert our claims in accordance with § 6 para. 6, the customer is immediately obliged to grant us access to the goods subject to retention of title, send us a detailed list of all the existing goods subject to retention of title, separate the goods for us and to return them to us upon request. (7) The processing or remodelling of the goods subject to retention of title by the customer shall be carried out solely for us. The customer’s expectant right to the goods subject to retention of title shall carry forward to the processed or remodelled item. If the item is irre-vocably processed, combined or mixed with other items not owned by us, we shall thereby become co-owner of the new item, reflecting the proportion of the value of the delivered item relative to the other processed items at the time of processing. The customer shall keep the new item in safe custody for us. The item originating from the processing or remodelling is thereby subject to the same regulations as the goods subject to retention of title.(8) At the customer’s request, we are obliged to release the securities that it is legally en-titled to, if the realisable value of the securities, taking into account the valuation haircuts customary in the banking sector, exceeds our claims resulting from the business relation-ship with the customer by more than 10 %. The valuation shall be based on the invoice va-lue of the goods subject to retention of title and on the nominal value in relation to claims.
(9) If any goods are delivered to countries with a different legal system, in which the regu-lations regarding retention of title do not guarantee the same degree of security pursuant to this paragraph as in the Federal Republic of Germany, the customer hereby acknow-ledges the corresponding security interest. If further declarations or actions are necessary, the customer shall provide these declarations and take action accordingly. The customer shall participate in all steps necessary for and beneficial to the efficacy and enforceability of these security interests.
§ 8 Contractual Obligations and Termination of Contract (1) The customer may only terminate the exchange of services prematurely in case of a breach of duty on our part, for whatever legal reason (e.g. in the case of withdrawal, claim for da-mages in lieu of the service, termination for cause) in addition to the statutory requirements subject to the following requirements:a) The breach of contract shall be specifically notified. The remedy of the fault shall be reques-ted within a stipulated time period. In addition, the threat shall be issued that after expiry of this period without results, no further services concerning the notified fault will be accepted and therefore the partial or complete exchange of services will be terminated. b) The period for remedying the fault must be adequate. A period of less than two weeks is only appropriate in cases of urgent necessity. In case of serious and final refusal of perfor-mance or subject to the other statutory requirements (Section 323, para. 2 BGB) the setting of a deadline may be dispensed with. c) The termination of the exchange of services (partially or completely) due to the inability to remedy the fault may only be declared within three weeks after end of this period. The period is delayed for the duration of negotiations.(2) The customer may only demand the rescission of the contract due to a delay in perfor-mance if we are exclusively or predominantly responsible for the delay, unless after assessing the different interests, the adherence to the contract cannot be reasonably imposed on the customer due to the delay.(3) Any declarations made in this context shall only be valid if recorded in writing.(4) Notice of termination in accordance with Section 649 BGB shall remain valid in accordance with the legal regulations.(5) We are entitled to cancel the contractual relationship with immediate effect for the fol-lowing reasons: if the customer has provided incorrect information regarding its credit worthi-ness or definitively discontinued payments or if proceedings have been filed against it for af-firmation in lieu of an oath, if insolvency proceedings have been filed regarding the customer’s assets or comparable proceedings under different legal systems have been commenced or if an application to do so has been filed, unless the customer pays in advance without delay. Furthermore, we may cancel the contractual relationship without delay if the customer has to pay in advance and it is at least 14 days in default in this regard.
§ 9 Customer’s General Duties (1) The customer is obliged to have all of our deliveries and services checked by a competent employee either immediately after delivery, or on receipt according to § 1, para. 1, or upon accessibility in accordance with the commercial law regulations (Section 377 of the German Civil Code (HGB)), and send notification of recognizable and/or recognized defects immedia-tely and in writing, including a detailed description of the defect. (2) The customer acknowledges that we are dependent on its comprehensive support in order to provide the deliveries and services owed by us successfully and in a timely manner. The customer therefore undertakes to provide all required information in full in a timely manner for the service to be performed properly.(3) The customer undertakes to test our services thoroughly for usability in the specific ap-plication and to subject these to a functional test before assembly, any subsequent delivery etc. This also applies to delivery items which the customer receives free of charge within the terms of the warranty.(4) The customer shall secure data that can be affected, negatively influenced or endangered by our services at appropriate intervals, but at least once daily, in a machine-readable form and shall thereby guarantee that this data will be retrievable with reasonable effort.(5) The customer shall take adequate precautions in case we partially or completely fail to pro-vide our deliveries and services appropriately (e.g. by securing data, fault diagnosis, checking the results regularly, emergency planning).
§ 10 Limitation of Use, Indemnity (1) Unless otherwise explicitly agreed in writing, our services are not intended for use in life-sus-taining or life-supporting devices and systems, nuclear power plants, for military purposes, appli-cation in aerospace or other purposes where malfunction of the product can, within reasonable assessment, lead to life-threatening situations or cause catastrophic consequential damage.(2) If the customer breaches para. 1, this shall occur at the customer‘s own risk and sole res-ponsibility. The customer hereby indemnifies and holds harmless both ourselves and the res-pective producer to the full extent at first request from any liability resulting from the use of goods in the above-mentioned contexts, including the cost of an appropriate legal defence.
§ 11 Material Defects (1) Our services have the stipulated properties and condition, and are suitable for the contrac-tually agreed use, or if no agreement is reached, are fit for normal use. Without explicit further agreement, it is solely guaranteed that our services will be free from defects in accordance with the current state of the art. It is the customer’s sole responsibility to guarantee the fitness and security of our services for an application provided by the customer. A negligible reduction in quality shall not be taken into account.(2) Warranty is excluded:a) if our products are not stored, installed, operated or used properly by the customer or a third party,b) in case of natural wear and tear,c) if the product is not maintained properly,d) if the product is used in connection with unsuitable equipment,e) in case of defects caused by repairs or other work carried out by third parties, which were not explicitly approved by us.It is the customer’s responsibility to prove that these exclusion criteria do not apply.In addition, the customer’s right to claim defects requires that it has properly attended to its obligations to inspect and give notice of non-conformity in accordance with § 9 para. 1 and has given notice of hidden defects in writing immediately after their discovery.(3) In case of material defects, we may firstly provide supplementary performance. The supple-mentary performance shall be carried out according to our choice by remedying the defect, by delivering goods and/or services that do not have the defect, or by pointing out a possible way to avoid the effects of the defect. At least two attempts to remedy a defect have to be accep-ted. The customer shall accept an equivalent new or earlier product version without defect as supplementary performance, if this can be reasonably imposed on it.(4) The customer shall support us in connection with the analysis of errors and remedy of the defect by precisely describing any problems occurring, by informing us comprehensively and giving us the necessary time and opportunity to remedy the defect. (5) We may demand payment if additional costs are incurred by us due to our products or services being modified or incorrectly operated. We may demand reimbursement of expenses if no defect is found. The burden of proof shall lie with the customer. Section 254 BGB shall apply accordingly.If expenses, including cost of transport, travel, work and material increase during the attempt to remedy the defect, we are not obliged to bear these costs if expenses increase due to the fact that the delivery item was subsequently transported by the customer to a different place than the place of delivery, unless the transport complies with its contractual and intended use. Staff and material costs that the customer claims due to defects of our services must be charged based on net costs.(6) Defective goods may only be returned to us for the purpose of the supplementary perfor-mance with the prior written consent in accordance with the rules existing in our company. The risk of accidental loss or deterioration of the goods shall only pass at the time of the acceptance by us at our business premises.(7) If we definitively refuse to remedy the defects, or if the remedy definitively fails or is un-reasonable for the customer, the customer is allowed either to terminate the contract in ac-cordance with the legal regulations in compliance with § 9, or reduce payment appropriately and, if we are responsible, additionally claim damages and reimbursement of expenses in ac-cordance with § 13. The claims shall lapse in accordance with § 14. This shall not affect the regulations of Sections 478, 479 BGB, unless United Nations Convention on Contracts for the International Sale of Goods (CISG) is applicable.
§ 12 Defects of Title (1) Unless otherwise agreed, we are obliged to perform our services free from industrial pro-perty rights and third-party copyrights (hereinafter referred to as property rights) solely in the country of the place of delivery. If a third party asserts a justified claim against the customer owing to the infringement of property rights caused by services provided by us based on the contract, we shall be liable to our customer within the period defined in § 14 as follows:(2) We will either obtain a right of use for the services in question, change them accordingly to avoid the infringement of the property right or replace them according to our choice and at our expense. If we are not able to do so under reasonable conditions, the customer shall be entitled to statutory rights of withdrawal or reduction. The customer may not claim damages for futile expenses.(3) Our obligation to pay damages is based on the legal stipulation in accordance with § 13.(4) Our duties mentioned above shall only exist if the customer informs us immediately in writing regarding claims asserted by third parties, if it does not recognise an infringement and we reserve the right to carry out all defence mechanisms and all negotiations to reach a compromise. If the customer terminates use of the delivery in order to minimise damage or for other important reasons, it shall be obliged to point out to the third party that the termination of use does not involve any acknowledgement of an infringement of property rights.(5) Claims asserted by the customer are excluded if the customer is responsible for the infringe-ment of property rights. Claims asserted by the customer are also excluded if the infringement
of property rights has been caused by the customer’s particular specifications, by an application that was not foreseeable by us, or as a result of a change in delivery caused by the customer, or if used together with products not delivered by us.(6) In all other cases, the regulations of § 11 shall apply accordingly.(7) Any further claims or the customer’s claims other than those mentioned here, either against us or our vicarious agents, due to a defect of title, are excluded.
§ 13 Liability (1) We shall pay damages or compensation for futile expenses, for whatever legal reason (e.g. obligation based on legal or similar transactions, material defects or defects of title, breach of duty or tortious act) only if we are at fault (intent or negligence) to the following extent:a) Liability in case of intent and under a warranty shall be unlimited.b) In case of gross negligence, we shall be liable to the extent of typical and foreseeable damage.c) In other cases, we shall only be liable in case of the breach of a material contractual obli-gation, claims for defects and delay, namely for the reimbursement of typical and foreseeable damage.Liability in this regard is limited to twice the amount of the agreed remuneration of the order/part of the contract affected by the damage per claim and to three times the order value for all claims under this contractual relationship.According to German court rulings, material contractual obligations (cardinal obligations) are obligations whose fulfilment is a prerequisite for enabling the proper fulfilment of the contract in the first place and in which the contractual party may normally trust.(2) In case of injury to life, body and health and claims from the German Product Liability Act [Produkthaftungsgesetz], the statutory regulations shall apply exclusively.(3) Our option to raise an objection of contributory negligence shall remain open.
§ 14 Limitation of Actions The deadline for limitation of actions is: a) one year from delivery of goods for claims for repayment of the purchase price and withdra-wal or reduction; however, if these claims are based on a proper, not statute-barred notice of defects, no less than three months after presenting the valid notice of withdrawal or reduction.b) one year, in case of other claims concerning material defects;c) one year in case of claims concerning defects of title. If the defect of title is a right in rem of a third party, based on which the return of the item can be demanded, the statutory limitation periods shall apply.d) in case of other claims for damages or reimbursement of futile expenses, one year, starting from the time at which the customer became aware of the circumstances the claims are based on, or had to become aware of without gross negligence.The limitation of actions shall begin at the end of the maximum statutory period at the latest (Section 199 para. 3, para. 4 BGB). (2) In case of the reimbursement of damages and expenses, gross negligence, warranty, frau-dulent intent as well as injuries to life, limb and health and claims under the German Product Liability Act, the statutory regulations shall always apply.
§ 15 Confidentiality, Data Security, Naming the Customer as a Reference Customer(1) The customer undertakes to treat as confidential all items (documents, information, soft-ware) that it becomes aware of or receives from the other contractual party either prior to or during the performance of the contract that are protected by law, or obviously contain business or company secrets or are identified as confidential, even after expiry of the contract, unless they are publicly known without a breach of the confidentiality obligation or if no legal interest worthy of protection regarding the contractual party exists.The customer agrees to store and secure these items in such a way as to prevent fraudulent use by third parties.(2) The customer undertakes to make the objects subject to the confidentiality obligation accor-ding to paragraph 1 only accessible to employees or other third parties who require access in order to carry out their official duties and responsibilities. It shall instruct these persons on the need for confidentiality regarding these objects.(3) We will process the necessary customer data relevant to business transactions with due regard for the data protection regulations. We may name the customer as a reference customer.
§ 16 Social Clause When determining the amount of any claim for compensation to be fulfilled by us or in connec-tion with this contract, our economic situation, the type, extent and duration of the business relationship, any possible contribution to the cause and/or fault on the part of the customer and a particularly disadvantageous installation of the item shall be taken into account appropriately for our benefit. In particular, any compensation, cost and expenses that we are expected to bear shall be proportionate to the value of the delivered part.
GENErAL CONdiTiONS OF SErviCE OF k2 SySTEmS GmBh
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 107
§ 17 Written Form Clause All changes and amendments to the contract shall only be valid if recorded in writing. The contractual parties shall comply with this requirement by sending documents in written or electronic form, particularly by fax or e-mail, unless other requirements for individual declarations exist. The written form requirement itself may only be revoked in writing.
§ 18 Severability Clause Should one of the provisions of these General Conditions of Service be or become in-valid, or should these General Conditions of Service be incomplete, this shall not affect the validity of the other provisions. The contractual parties shall substitute the invalid provision by a provision which approximates most closely to the sense and purpose of the invalid provision. The same applies to gaps in the contract.
§ 19 Choice of Law The law of the Federal Republic of Germany, including the provisions on the application of the United Nations Convention on Contracts for the International Sale of Goods (CISG) as part of German law, shall apply.
§ 20 Legal Venue The legal venue for all disputes arising from and in connection with this contract shall be Stuttgart (Germany), insofar as the customer is a businessperson, a public law entity or a special fund under public law, or treated as equivalent to such, or if its registered office or branch office is outside Germany. We are also entitled to bring a legal action at the customer‘s registered office as well as any other admissible legal venue.
Last revised: February 2012
GENErAL CONdiTiONS OF SErviCE OF k2 SySTEmS GmBh
NOTES
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 109 Bestellformular | D1 | 0212
PurChASE OrdEr FOrmPlease complete all fields below and e-mail the form to [email protected] or send as Fax to +49 (0) 7152 3560-209
AdrESSCustomer id(if available)
company
contact Person
street
Postcode | city
country
Phone
Fax
Order-No./reference-No.
delivery by
requested delivery date:
Notes:
[ ] standard [ ] Next day [ ] same day (dedicated vehicle)A change of delivery address within 1 day after receipt of order confirmation implies charges and is only possible to a limited extend.
Our GtB and General conditions of service apply; please see www.k2-systems.com
[ ] pickup
Date, signature
ShiPPiNG AdrESS [ ] like AdressPlease arrange for adequate unloading facilities on site.
company
contact Person
Phone info/Avis
street
Postcode | city
country
Article number description pcs. unit
APPrOACh
rutesheim
leonberg
magstadt
renninger straße
riedwiesen straße
renninger straße
rutesheimer straße
Halden straßecalwer
stra
ße
Neue r
amtel
straß
e
Pero
user
str
aße
renningen
sindelfingen
K1060 B295
B295
81
831
81B295
lager malmsheim:K2 systems GmbHHaldenstr. 171272 renningentel. +49 7159 4086-296www.k2-systems.com
Zentrale:K2 systems GmbHriedwiesenstr. 13-1771229 leonbergtel. +49 7152 3560-0www.k2-systems.com
19 ad leonberg
a81 schaffhausen
a8 karlsruhe a81 Heilbronn | a6 nürnberg
8
a8 m
ün
chen
8
8
50 as leonberg ost
Zentrale
lager malmsheim
GENErAL
mounting rails
roof attachments
mounting module
screws &nuts
system components
accessories
pitched roofsystems
flat roof systems
Ground mounted systems
supplementary systems
PrOduCTS
SySTEmS
pricelist 01/2012 page 111
Mounting systems for solar technology
pricelist | GB3 | 0312 | subject to change
Product illustrations are exemplary illustrations and may differ from the original.serVice-HOtliNe+49 (0)7152 3560-0
www.k2-systems.com