Upload
lyliem
View
219
Download
3
Embed Size (px)
Citation preview
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1
(Typed Responses Required)
JANUARY 2015
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BOBCAT COMPANYContact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested Answer
1.0 MAKE AND MODEL BOBCAT S70
Engine Type and SAE net HP KUBOTA /D1005-E2B NET 22.5hp
Tier 4 Compliant? (Y/N) Y
Length w/o attachments 75.5"
Height with operator cab 71.4"
Ground clearance 5.5"
Maximum height to bucket hinge pin 94.5"
Breakout force Tilt 1950 lbs Lift 1935 lbs
Reach at maximum height 18.5"
Dump angle at maximum height 34°
Dump height with standard bucket 74.5"
Front clearance circle with standard bucket 61.3"
Rear clearance circle 61.3"
Tipping load - SAE rated 1512 lbs (ISO 14397-1)
Rated operating capacity - SAE 700 lbs (ISO 14397-1)
Standard bucket capacity - SAE heaped rating 4.7 cu ft. ISO
Operating weight - SAE rated 2795 lbs (SAE J732)
Travel speed 6.1 mph
Fuel tank capacity 6.5 gal.
Cold weather starting assist Optional
Battery CCA 600 CCA
Alternator size - amps 65 amps
Transmission type Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
Tire / Track size / width 23 x 5.7-12 4 PLY Rated
Final drive chains and drive method Pre-Stressed #60 HS Endless Roller Chain (no master link) and
sprockets in sealed chaincase with oil lubrication. (Chains do not
require periodic adjustments) Two Chains per side with no idler
sprocket
Final drive chain adjustment / maintenance No required periodic adjustments
Gauges / instrumentation Hourmeter, Engine Coolant Temp., Sysem Voltage, Warning Lights
(Engine Oil Pressure and Coolant Temperature) BICS Function
Indicator.
Pump type - GPM and PSI Engine Driven, Gear type, 9.8 GPM, 3000 PSI
Control valves 3-Spool, open center with spring detent on lift and detent auxiliary
spool.
Hydraulic oil cooler Standard
Drive controls Direction and Speed controlled by two hand levers.
Lift and tilt controls Controlled by separate foot pedals.
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1
(Typed Responses Required)
JANUARY 2015
Spec # Information Requested Answer
Engine speed control Hand Lever throttle, key-type starter switch and shutdown.
Work lights - front Standard
Work lights - rear Standard
Warranty 1 yr.
BASE UNIT PRICE: $ 14,226.10
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
1 BASE UNIT PRICE: 14,226.10$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments.
2.1 Cab Enclosure with Heater and Sound Reduction 1,225.00$ 2.2 Sound Reduction Option 154.00$ 2.3 Suspension Seat 129.50$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 36" Dirt Bucket 339.50$ 3.2 44" Dirt Bucket 360.50$ 3.3 36" General Purpose Bucket 371.00$ 3.4 44" General Purpose Bucket 392.00$ 3.5 50" General Purpose Bucket 409.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 N/A4.2
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 36" Pallet Fork Teeth, Set of 2 262.50$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.16.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB150 x 36" 3,066.00$ 7.2 SB150 x 48" 3,167.50$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 44" Sweeper 2,163.00$ 8.2
9.0 Backhoe:Use this section to offer backhoe options.
9.1 N/A9.2
10.0 Planer:Use this section to offer planer options.
10.1 N/A10.2
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 54" Utility Blade (with hydraulic angle) 966.00$ 11.2
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 HB680 Breaker 3,101.00$ 12.2
13.0 Grapple:Use this section to offer grapple options.
13.1 32" Utility Grapple 798.00$ 13.2 36" Industrial Bucket Grapple 1,256.50$ 13.3 36" Root Grapple 1,277.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 N/A14.2
15.0 Grader:Use this section to offer grader options.
15.1 N/A15.2
16.0 Auger:Use this section to offer auger options.
16.1 MODEL 10 AUGER DRIVE UNIT 913.50$ 16.2 MOUNTING FRAME 6812980 304.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 N/A17.2
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 N/A18.2
19.0 Other:Use this section to offer any other option not already covered.
19.1 48" Angle Broom 2,233.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: -$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 894.00$ 10.02 36MONTH/3000HR 1,744.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
2 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S450
BOBCAT 1.8L TIER 4 NET 47HP
Y
98.4"
77.8"
8.4"
109.5"
Tilt 2776 lbs Lift 2765
20.8"
40°
84.9"
76.4"
60.6"
2600 lbs (ISO 14397-1)
1300 lbs (ISO 14397-1)
14.5 cu ft. ISO
5027 lbs (ISO 14397-1)
7.1 mph
14.4 gal.
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
10.00-16.5 10 PLY Rating
Pre-Stressed #80 HS Endless Roller Chain (no master link) and
sprockets in sealed chaincase with oil lubrication. (Chains do not
require periodic adjustments) Two Chains per side with no idler
sprocket
No required periodic adjustments
Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
Setting
Engine Driven, Gear type, 16.7 gpm, 3350 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard Equipment
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 23,159.50
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
2 BASE UNIT PRICE: 23,159.50$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments.
2.1 A51 Option Package 3,379.60$ 2.2 H51 Option Package 2,375.10$ 2.3 O31 Option Package 557.90$ 2.4 Advanced Control System (ACS)* 980.70$ 2.5 Selectable Joystick Control (SJC) 1,862.00$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 56" Constr./Ind. Bucket ¨ 658.00$ 3.2 62" Constr./Ind. Bucket ¨ 598.50$ 3.3 68" Constr./Ind. Bucket ¨ 679.00$ 3.4 54" Fertilizer & Grain Bucket D 563.50$ 3.5 60" Fertilizer & Grain Bucket D 574.00$ 3.6 56" General Purpose Bucket ¨ 451.50$ 3.7 62" General Purpose Bucket ¨ 476.00$ 3.8 68" General Purpose Bucket ¨ 486.50$ 3.9 74" General Purpose Bucket ¨ 518.00$
3.10 56" Low Profile Bucket ¨ 665.00$ 3.11 62" Low Profile Bucket ¨ 609.00$ 3.12 68" Low Profile Bucket ¨ 686.00$ 3.13 68" Snow & Light Material Bucket D 784.00$ 3.14 74" Snow & Light Material Bucket D 829.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 N/A4.2
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.16.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 60” Snowblower 3,006.50$ SB200 x 66” Snowblower 3,101.00$ SB200 x 72” Snowblower 3,202.50$ 5.5 Hydraulic Motor Package 745.50$ 6.2 Hydraulic Motor Package 745.50$ 8.0 Hydraulic Motor Package 787.50$ 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 54" Sweeper 2,387.00$ 8.2 60" Sweeper 2,597.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 N/A9.2
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 2 ½" Slot Cut Drum 871.50$ 10.3 4" Slot Cut Drum 966.00$ 10.4 6" All Purpose Drum 1,263.50$ 10.5 8" All Purpose Drum 1,263.50$ 10.6 12" All Purpose Drum 1,578.50$ 10.7 14" All Purpose Drum 1,669.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 60" Snow Blade (with hydraulic angle) 1,400.00$ 11.2 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.3 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.4 60" Snow V-Blade 2,460.50$ 11.5 60" Snow V-Blade, 7-Pin 2,726.50$ 11.6 72" Snow V-Blade 2,912.00$ 11.7 84" Snow V-Blade 2,978.50$ 11.8 Snow Pusher, 8' 2,166.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 HB880 Breaker 4,392.50$ 12.2 Loader Mounting Frame (7113737) 469.00$ 12.3 HB980 Breaker 5,502.00$ 12.4 HOSE KIT 143.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 62" Industrial Bucket Grapple 2,250.50$ 13.4 68" Industrial Bucket Grapple 2,369.50$ 13.5 66" Industrial Fork Grapple, with 7 teeth 2,772.00$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 72" Mower 3,426.50$ 14.3 60" Soil Conditioner, Manual Angle 3,426.50$ 14.4 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.5 72" Soil Conditioner, Manual Angle 5,600.00$ 14.6 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.7 SP5 Spreader 1,452.50$ 14.8 HS8 Spreader 2,348.50$ 14.9 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.10 Adjustable Deflector 84.00$ 14.11 Gate Assembly Kit 129.50$ 14.12 Vibrator Kit 301.00$ 14.13 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.14 72" Basic Landplane Leveling Attachment 931.00$ 14.15 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.16 78" Basic Landplane Leveling Attachment 1,011.50$ 14.17 66" Brushcat Rotary Cutter, Standard Flow (RC66) 4,284.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MODEL 10 AUGER DRIVE UNIT 913.50$ 16.2 MOUNTING FRAME 6812980 259.00$ 16.3 Model 15C Auger Drive Unit 1,106.00$ 16.4 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 N/A17.2
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 48" Vibratory Roller with Padded Drum 5,908.00$ 18.2 48" Vibratory Roller with Smooth Drum 5,764.50$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 1,257.00$ 10.02 36MONTH/3000HR 2,065.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
3 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S510
BOBCAT 2.4L T4, NET 46.2 HP
Y
104.6"
77.8"
7.3"
114.5"
Tilt 3276 lbs Lift 3242 lbs
17.0"
42°
86.8"
80"
65.3"
3300 lbs (ISO 14397-1)
1650 lbs (ISO 14397-1)
16.0 cu ft. ISO
5922 lbs (ISO 14397-1)
7.4 mph
24.75 gal
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
10.00-16.5 8 PLY Rating
Prestressed #80 HSOC endless roller chain (no master link) and
sprockets in sealed chaincase with oil lubrication (Chains do not
require periodic adjustments) Two chains per side with no idler
sprocket
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 23,718.10
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
3 BASE UNIT PRICE: 23,718.00$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 H51 Option Package 2,375.10$ 2.2 O71 Option Package 1,613.50$ 2.3 O51 Option Package 977.90$ 2.4 O31 Option Package 557.90$ 2.5 Advanced Control System (ACS)* 980.70$ 2.6 Selectable Joystick Control (SJC) 1,536.50$ 2.7 7 Pin Attachment Control Kit 143.50$ 2.8 Two Speed, Engine Block Heater 1,218.70$ 2.9 Two Speed, Hydraulic Bucket Positioning, Cold Weather Pkg 1,537.90$ 2.10 Hydraulic Bucket Positioning 327.60$ 2.11 Suspension Seat - Required for Two Speed if not ordering a "Cab Opt Pkg". 349.30$ 2.12 Cold Weather Pkg (Incls Eng Block Heater and Larger Battery (950 cca)) 140.00$ 2.13 Air Ride Suspension Seat 219.80$ 2.14 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 56" Constr./Ind. Bucket ¨ 658.00$ 3.2 62" Constr./Ind. Bucket ¨ 598.50$ 3.3 68" Constr./Ind. Bucket ¨ 679.00$ 3.4 54" Fertilizer & Grain Bucket D 563.50$ 3.5 60" Fertilizer & Grain Bucket D 574.00$ 3.6 56" General Purpose Bucket ¨ 451.50$ 3.7 62" General Purpose Bucket ¨ 476.00$ 3.8 68" General Purpose Bucket ¨ 486.50$ 3.9 74" General Purpose Bucket ¨ 518.00$
3.10 56" Low Profile Bucket ¨ 665.00$ 3.11 62" Low Profile Bucket ¨ 609.00$ 3.12 68" Low Profile Bucket ¨ 686.00$ 3.13 68" Snow & Light Material Bucket D 784.00$ 3.14 74" Snow & Light Material Bucket D 829.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 10.00-16.5 (72" loader width) (S510, S530, S550, S570, S590) 2,250.50$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.16.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 60” Snowblower 3,006.50$ 7.2 SB200 x 66” Snowblower 3,101.00$ 7.3 SB200 x 72” Snowblower 3,202.50$ 7.4 5.5 Hydraulic Motor Package 745.50$ 7.5 6.2 Hydraulic Motor Package 745.50$ 7.6 8.0 Hydraulic Motor Package 787.50$ 7.7 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 60" Sweeper 2,597.00$ 8.2 72" Sweeper 2,894.50$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 Bob-Tach Mounted Backhoe 3,248.00$ 9.2 Hydraulic Clamp 1,092.00$ 9.3 9BH Backhoe 7,910.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.16 36" Trenching Bucket, Smooth Lip 658.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 2 ½" Slot Cut Drum 871.50$ 10.3 4" Slot Cut Drum 966.00$ 10.4 6" All Purpose Drum 1,263.50$ 10.5 8" All Purpose Drum 1,263.50$ 10.6 12" All Purpose Drum 1,578.50$ 10.7 14" All Purpose Drum 1,669.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 60" Snow Blade (with hydraulic angle) 1,400.00$ 11.2 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.3 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.4 60" Snow V-Blade 2,460.50$ 11.5 60" Snow V-Blade, 7-Pin 2,726.50$ 11.6 72" Snow V-Blade 2,912.00$ 11.7 84" Snow V-Blade 2,978.50$ 11.8 Snow Pusher, 8' 2,166.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 HB880 Breaker 4,392.50$ 12.2 Loader Mounting Frame (7113737) 469.00$ 12.3 HB980 Breaker 5,502.00$ 12.4 HOSE KIT 143.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 62" Industrial Bucket Grapple 2,250.50$ 13.4 68" Industrial Bucket Grapple 2,369.50$ 13.5 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.6 66" Root Grapple 2,089.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 66" Brushcat Rotary Cutter, Standard Flow (RC66) 4,284.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MODEL 10 AUGER DRIVE UNIT 913.50$ 16.2 MOUNTING FRAME 6812980 259.00$ 16.3 Model 15C Auger Drive Unit 1,106.00$ 16.4 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.5 Model 30C Auger Drive Unit 1,484.00$ 16.6 Model 30H Hex Shaft Auger Drive Unit 1,484.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 N/A17.2
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 48" Vibratory Roller with Padded Drum 5,908.00$ 18.2 48" Vibratory Roller with Smooth Drum 5,764.50$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 1,288.00$ 10.02 36MONTH/3000HR 2,114.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
4 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S530
BOBCAT 2.4L T4, NET 46.2 HP
Y
104.6"
77.8"
7.3"
119"
Tilt 3856lbs Lift 3953 lbs
32.6"
42°
91.3"
79.7"
65.3"
3700 lbs (ISO 14397-1)
1850 lbs (ISO 14397-1)
16.0 cu ft. ISO
6480 lbs (ISO 14397-1)
7.35 mph
24.75 gal
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
10.00-16.5 8 PLY Rating
Prestressed #80 HSOC endless roller chain (no master link) and
sprockets in sealed chaincase with oil lubrication (Chains do not
require periodic adjustments) Two chains per side with no idler
sprocket
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 24,804.50
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
4 BASE UNIT PRICE: 24,804.50$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 H51 Option Package 2,375.10$ 2.2 O71 Option Package 1,613.50$ 2.3 O51 Option Package 977.90$ 2.4 O31 Option Package 557.90$ 2.5 Advanced Control System (ACS)* 980.70$ 2.6 Selectable Joystick Control (SJC) 1,536.50$ 2.7 7 Pin Attachment Control Kit 143.50$ 2.8 Two Speed, Engine Block Heater 1,218.70$ 2.9 Two Speed, Hydraulic Bucket Positioning, Cold Weather Pkg 1,537.90$ 2.10 Hydraulic Bucket Positioning 327.60$ 2.11 Suspension Seat - Required for Two Speed if not ordering a "Cab Opt Pkg". 349.30$ 2.12 Cold Weather Pkg (Incls Eng Block Heater and Larger Battery (950 cca)) 140.00$ 2.13 Air Ride Suspension Seat 219.80$ 2.14 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 62" Constr./Ind. Bucket ¨ 598.50$ 3.2 68" Constr./Ind. Bucket ¨ 679.00$ 3.3 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.4 74" Constr./Ind. Bucket 735.00$ 3.5 60" Fertilizer & Grain Bucket D 574.00$ 3.6 66" Fertilizer & Grain Bucket D 714.00$ 3.7 62" General Purpose Bucket ¨ 476.00$ 3.8 68" General Purpose Bucket ¨ 486.50$ 3.9 74" General Purpose Bucket ¨ 518.00$
3.10 62" Low Profile Bucket ¨ 609.00$ 3.11 68" Low Profile Bucket ¨ 686.00$ 3.12 74" Low Profile Bucket 745.50$ 3.13 68" Snow & Light Material Bucket D 784.00$ 3.14 74" Snow & Light Material Bucket D 829.50$ 3.15 80" Snow & Light Material Bucket D 910.00$ 3.16 88" Snow & Light Material Bucket D (S530, S570, S590 Only) 969.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 10.00-16.5 (72" loader width) (S510, S530, S550, S570, S590) 2,250.50$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.16.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 60” Snowblower 3,006.50$ 7.2 SB200 x 66” Snowblower 3,101.00$ 7.3 SB200 x 72” Snowblower 3,202.50$ 7.4 5.5 Hydraulic Motor Package 745.50$ 7.5 6.2 Hydraulic Motor Package 745.50$ 7.6 8.0 Hydraulic Motor Package 787.50$ 7.7 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 60" Sweeper 2,597.00$ 8.2 72" Sweeper 2,894.50$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 Bob-Tach Mounted Backhoe 3,248.00$ 9.2 Hydraulic Clamp 1,092.00$ 9.3 9BH Backhoe 7,910.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 2 ½" Slot Cut Drum 871.50$ 10.3 4" Slot Cut Drum 966.00$ 10.4 6" All Purpose Drum 1,263.50$ 10.5 8" All Purpose Drum 1,263.50$ 10.6 12" All Purpose Drum 1,578.50$ 10.7 14" All Purpose Drum 1,669.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 60" Snow Blade (with hydraulic angle) 1,400.00$ 11.2 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.3 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.4 60" Snow V-Blade, 7-Pin 2,726.50$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 Snow Pusher, 8' 2,166.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 HB880 Breaker 4,392.50$ 12.2 Loader Mounting Frame (7113737) 469.00$ 12.3 HB980 Breaker 5,502.00$ 12.4 HOSE KIT 143.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 62" Industrial Bucket Grapple 2,250.50$ 13.4 68" Industrial Bucket Grapple 2,369.50$ 13.5 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.6 66" Root Grapple 2,089.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$ 14.23 66" Brushcat Rotary Cutter, Standard Flow (RC66) 4,284.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MODEL 10 AUGER DRIVE UNIT 913.50$ 16.2 MOUNTING FRAME 6812980 259.00$ 16.3 Model 15C Auger Drive Unit 1,106.00$ 16.4 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.5 Model 30C Auger Drive Unit 1,484.00$ 16.6 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.7 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.8 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.9 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 N/A17.2
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 48" Vibratory Roller with Padded Drum 5,908.00$ 18.2 48" Vibratory Roller with Smooth Drum 5,764.50$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 1,347.00$ 10.02 36MONTH/3000HR 2,211.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
5 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S550
BOBCAT 2.4L T4, NET 60 HP
Y
104.6"
77.8"
7.3"
114.5
Tilt 4080 lbs Lift 4246 lbs
17.0"
42°
86.8"
80.0"
65.3"
3500 lbs (ISO 14397-1)
1750 lbs (ISO 14397-1)
16.0 cu ft. ISO
6265 lbs (ISO 14397-1)
7.4 mph
24.75 gal
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
10.00-16.5 8 PLY Rating
Prestressed #80 HSOC endless roller chain (no master link) and
sprockets in sealed chaincase with oil lubrication (Chains do not
require periodic adjustments) Two chains per side with no idler
sprocket
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 25,986.10
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
5 BASE UNIT PRICE: 25,986.10$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 6,851.60$ 2.2 A71 Option Package 4,315.50$ 2.3 A51 Option Package 3,451.00$ 2.4 A31 Option Package 3,006.50$ 2.5 H51 Option Package 2,446.50$ 2.6 O71 Option Package 1,661.10$ 2.7 O51 Option Package 1,008.00$ 2.8 O31 Option Package 557.90$ 2.9 Advanced Control System (ACS)* 980.70$
2.10 Selectable Joystick Control (SJC) 1,536.50$ 2.11 7 Pin Attachment Control Kit 143.50$ 2.12 High Flow Hydraulics 1,099.70$ 2.13 High Flow Hydraulics, Two Speed, Hydraulic Bucket Positioning,Cold Weather Package 2,612.40$ 2.14 Two Speed 1,107.40$ 2.15 Suspension Seat with Three Point Belt 349.30$ 2.16 Two Speed, Cold Weather Package 1,218.70$ 2.17 Two Speed, Hydraulic Bucket Positioning, Cold Weather Pkg 1,537.90$ 2.18 Hydraulic Bucket Positioning 327.60$ 2.19 Hydraulic Bucket Positioning, Cold Weather Pkg 457.10$ 2.20 Suspension Seat - Required for Two Speed if not ordering a "Cab Opt Pkg". 349.30$ 2.21 Cold Weather Pkg (Incls Eng Block Heater and Larger Battery (950 cca)) 140.00$ 2.22 Air Ride Suspension Seat 219.80$ 2.23 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 62" Constr./Ind. Bucket ¨ 598.50$ 3.2 68" Constr./Ind. Bucket ¨ 679.00$ 3.3 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.4 74" Constr./Ind. Bucket 735.00$ 3.5 60" Fertilizer & Grain Bucket D 574.00$ 3.6 66" Fertilizer & Grain Bucket D 714.00$ 3.7 62" General Purpose Bucket ¨ 476.00$ 3.8 68" General Purpose Bucket ¨ 486.50$ 3.9 74" General Purpose Bucket ¨ 518.00$
3.10 62" Low Profile Bucket ¨ 609.00$ 3.11 68" Low Profile Bucket ¨ 686.00$ 3.12 74" Low Profile Bucket 745.50$ 3.13 68" Snow & Light Material Bucket D 784.00$ 3.14 74" Snow & Light Material Bucket D 829.50$ 3.15 80" Snow & Light Material Bucket D 910.00$ 3.16 88" Snow & Light Material Bucket D (S530, S570, S590 Only) 969.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 10.00-16.5 (72" loader width) (S510, S530, S550, S570, S590) 2,250.50$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.16.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 60” Snowblower 3,006.50$ 7.2 SB200 x 66” Snowblower 3,101.00$ 7.3 SB200 x 72” Snowblower 3,202.50$ 7.4 5.5 Hydraulic Motor Package 745.50$ 7.5 6.2 Hydraulic Motor Package 745.50$ 7.6 8.0 Hydraulic Motor Package 787.50$ 7.7 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 60" Sweeper 2,597.00$ 8.2 72" Sweeper 2,894.50$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 Bob-Tach Mounted Backhoe 3,248.00$ 9.2 Hydraulic Clamp 1,092.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.3 9BH Backhoe 7,910.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 2 ½" Slot Cut Drum 871.50$ 10.5 4" Slot Cut Drum 966.00$ 10.6 6" All Purpose Drum 1,263.50$ 10.7 8" All Purpose Drum 1,263.50$ 10.8 12" All Purpose Drum 1,578.50$ 10.9 14" All Purpose Drum 1,669.50$ 10.10 16" Surface Drum 3,608.50$ 10.11 16" Fast Cut All Purpose Drum 2,075.50$ 10.12 16" Smooth Cut All Purpose Drum 2,618.00$ 10.13 18" Fast Cut All Purpose Drum 2,121.00$ 10.14 18" Smooth Cut All Purpose Drum 2,705.50$ 10.15 24" Fast Cut All Purpose Drum 2,873.50$ 10.16 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 60" Snow Blade (with hydraulic angle) 1,400.00$ 11.2 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.3 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.4 60" Snow V-Blade, 7-Pin 2,726.50$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 HB880 Breaker 4,392.50$ 12.2 Loader Mounting Frame (7113737) 469.00$ 12.3 HB980 Breaker 5,502.00$ 12.4 HOSE KIT 143.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 62" Industrial Bucket Grapple 2,250.50$ 13.4 68" Industrial Bucket Grapple 2,369.50$ 13.5 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.6 66" Root Grapple 2,089.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$ 14.22 Packer Wheel 1,414.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
14.23 66" Brushcat Rotary Cutter, Standard Flow (RC66) 4,284.00$ 14.24 66" Brushcat Rotary Cutter, High Flow (RC66HF) 4,340.00$ 14.25 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.26 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MODEL 10 AUGER DRIVE UNIT 913.50$ 16.2 MOUNTING FRAME 6812980 259.00$ 16.3 Model 15C Auger Drive Unit 1,106.00$ 16.4 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.5 Model 30C Auger Drive Unit 1,484.00$ 16.6 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.7 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.8 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.9 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 48" Vibratory Roller with Padded Drum 5,908.00$ 18.2 48" Vibratory Roller with Smooth Drum 5,764.50$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 1,411.00$ 10.02 36MONTH/3000HR 2,316.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
6 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S570
BOBCAT 2.4L T4, NET 60 HP
Y
104.6"
77.8"
7.3"
119.0"
Tilt 3754 lbs Lift 3905 lbs
32.6"
42°
91.3"
79.7"
65.3"
3900 lbs (ISO 14397-1)
1950 lbs (ISO 14397-1)
16.0 cu ft.. ISO
6395 lbs (ISO 14397-1)
7.4 mph
24.75 gal
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
10.00-16.5 8 PLY Rating
Prestressed #80 HSOC endless roller chain (no master link) and
sprockets in sealed chaincase with oil lubrication (Chains do not
require periodic adjustments) Two chains per side with no idler
sprocket
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 27,434.40
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
6 BASE UNIT PRICE: 27,434.40$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 6,851.60$ 2.2 A71 Option Package 4,315.50$ 2.3 A51 Option Package 3,451.00$ 2.4 A31 Option Package 3,006.50$ 2.5 H51 Option Package 2,446.50$ 2.6 O71 Option Package 1,661.10$ 2.7 O51 Option Package 1,008.00$ 2.8 O31 Option Package 557.90$ 2.9 Advanced Control System (ACS)* 980.70$
2.10 Selectable Joystick Control (SJC) 1,536.50$ 2.11 7 Pin Attachment Control Kit 143.50$ 2.12 High Flow Hydraulics 1,099.70$ 2.13 High Flow Hydraulics, Two Speed, Hydraulic Bucket Positioning,Cold Weather Package 2,612.40$ 2.14 Two Speed 1,107.40$ 2.15 Suspension Seat with Three Point Belt 349.30$ 2.16 Two Speed, Cold Weather Package 1,218.70$ 2.17 Two Speed, Hydraulic Bucket Positioning, Cold Weather Pkg 1,537.90$ 2.18 Hydraulic Bucket Positioning 327.60$ 2.19 Hydraulic Bucket Positioning, Cold Weather Pkg 457.10$ 2.20 Suspension Seat - Required for Two Speed if not ordering a "Cab Opt Pkg". 349.30$ 2.21 Cold Weather Pkg (Incls Eng Block Heater and Larger Battery (950 cca)) 140.00$ 2.22 Air Ride Suspension Seat 219.80$ 2.23 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 62" Constr./Ind. Bucket ¨ 598.50$ 3.2 68" Constr./Ind. Bucket ¨ 679.00$ 3.3 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.4 74" Constr./Ind. Bucket 735.00$ 3.5 60" Fertilizer & Grain Bucket D 574.00$ 3.6 66" Fertilizer & Grain Bucket D 714.00$ 3.7 62" General Purpose Bucket ¨ 476.00$ 3.8 68" General Purpose Bucket ¨ 486.50$ 3.9 74" General Purpose Bucket ¨ 518.00$
3.10 62" Low Profile Bucket ¨ 609.00$ 3.11 68" Low Profile Bucket ¨ 686.00$ 3.12 74" Low Profile Bucket 745.50$ 3.13 68" Snow & Light Material Bucket D 784.00$ 3.14 74" Snow & Light Material Bucket D 829.50$ 3.15 80" Snow & Light Material Bucket D 910.00$ 3.16 88" Snow & Light Material Bucket D (S530, S570, S590 Only) 969.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 10.00-16.5 (72" loader width) (S510, S530, S550, S570, S590) 2,250.50$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.16.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 60” Snowblower 3,006.50$ 7.2 SB200 x 66” Snowblower 3,101.00$ 7.3 SB200 x 72” Snowblower 3,202.50$ 7.4 5.5 Hydraulic Motor Package 745.50$ 7.5 6.2 Hydraulic Motor Package 745.50$ 7.6 8.0 Hydraulic Motor Package 787.50$ 7.7 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 60" Sweeper 2,597.00$ 8.2 72" Sweeper 2,894.50$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 Bob-Tach Mounted Backhoe 3,248.00$ 9.2 Hydraulic Clamp 1,092.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.3 9BH Backhoe 7,910.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 2 ½" Slot Cut Drum 871.50$ 10.5 4" Slot Cut Drum 966.00$ 10.6 6" All Purpose Drum 1,263.50$ 10.7 8" All Purpose Drum 1,263.50$ 10.8 12" All Purpose Drum 1,578.50$ 10.9 14" All Purpose Drum 1,669.50$ 10.10 16" Surface Drum 3,608.50$ 10.11 16" Fast Cut All Purpose Drum 2,075.50$ 10.12 16" Smooth Cut All Purpose Drum 2,618.00$ 10.13 18" Fast Cut All Purpose Drum 2,121.00$ 10.14 18" Smooth Cut All Purpose Drum 2,705.50$ 10.15 24" Fast Cut All Purpose Drum 2,873.50$ 10.16 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 60" Snow Blade (with hydraulic angle) 1,400.00$ 11.2 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.3 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.4 60" Snow V-Blade, 7-Pin 2,726.50$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 HB880 Breaker 4,392.50$ 12.2 Loader Mounting Frame (7113737) 469.00$ 12.3 HB980 Breaker 5,502.00$ 12.4 HOSE KIT 143.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 62" Industrial Bucket Grapple 2,250.50$ 13.4 68" Industrial Bucket Grapple 2,369.50$ 13.5 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.6 66" Root Grapple 2,089.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$ 14.22 Packer Wheel 1,414.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
14.23 66" Brushcat Rotary Cutter, Standard Flow (RC66) 4,284.00$ 14.24 66" Brushcat Rotary Cutter, High Flow (RC66HF) 4,340.00$ 14.25 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.26 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MODEL 10 AUGER DRIVE UNIT 913.50$ 16.2 MOUNTING FRAME 6812980 259.00$ 16.3 Model 15C Auger Drive Unit 1,106.00$ 16.4 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.5 Model 30C Auger Drive Unit 1,484.00$ 16.6 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.7 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.8 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.9 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 48" Vibratory Roller with Padded Drum 5,908.00$ 18.2 48" Vibratory Roller with Smooth Drum 5,764.50$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 1,489.00$ 10.02 36MONTH/3000HR 2,446.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
7 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S590
BOBCAT 2.4L T4, NET 65 HP
Y
104.6"
77.8"
7.3"
119.0"
Tilt 4356 lbs Lift 4540 lbs
32.6"
42°
91.3"
79.7"
65.3"
4200 lbs (ISO 14397-1)
2100 lbs (ISO 14397-1)
16.0 cu ft. ISO
6735 lbs (ISO 14397-1)
7.4 mph
24.75 gal
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
31 x 12 - 16.5
Prestressed #80 HSOC endless roller chain (no master link) and
sprockets in sealed chaincase with oil lubrication (Chains do not
require periodic adjustments) Two chains per side with no idler
sprocket
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 28,363.30
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
7 BASE UNIT PRICE: 28,363.30$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 6,851.60$ 2.2 A71 Option Package 4,315.50$ 2.3 A51 Option Package 3,451.00$ 2.4 A31 Option Package 3,006.50$ 2.5 H51 Option Package 2,446.50$ 2.6 O71 Option Package 1,661.10$ 2.7 O51 Option Package 1,008.00$ 2.8 O31 Option Package 557.90$ 2.9 Advanced Control System (ACS)* 980.70$
2.10 Selectable Joystick Control (SJC) 1,536.50$ 2.11 7 Pin Attachment Control Kit 143.50$ 2.12 High Flow Hydraulics 1,099.70$ 2.13 High Flow Hydraulics, Two Speed, Hydraulic Bucket Positioning,Cold Weather Package 2,612.40$ 2.14 Two Speed 1,107.40$ 2.15 Suspension Seat with Three Point Belt 349.30$ 2.16 Two Speed, Cold Weather Package 1,218.70$ 2.17 Two Speed, Hydraulic Bucket Positioning, Cold Weather Pkg 1,537.90$ 2.18 Hydraulic Bucket Positioning 327.60$ 2.19 Hydraulic Bucket Positioning, Cold Weather Pkg 457.10$ 2.20 Suspension Seat - Required for Two Speed if not ordering a "Cab Opt Pkg". 349.30$ 2.21 Cold Weather Pkg (Incls Eng Block Heater and Larger Battery (950 cca)) 140.00$ 2.22 Air Ride Suspension Seat 219.80$ 2.23 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 62" Constr./Ind. Bucket ¨ 598.50$ 3.2 68" Constr./Ind. Bucket ¨ 679.00$ 3.3 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.4 74" Constr./Ind. Bucket 735.00$ 3.5 60" Fertilizer & Grain Bucket D 574.00$ 3.6 66" Fertilizer & Grain Bucket D 714.00$ 3.7 62" General Purpose Bucket ¨ 476.00$ 3.8 68" General Purpose Bucket ¨ 486.50$ 3.9 74" General Purpose Bucket ¨ 518.00$
3.10 62" Low Profile Bucket ¨ 609.00$ 3.11 68" Low Profile Bucket ¨ 686.00$ 3.12 74" Low Profile Bucket 745.50$ 3.13 68" Snow & Light Material Bucket D 784.00$ 3.14 74" Snow & Light Material Bucket D 829.50$ 3.15 80" Snow & Light Material Bucket D 910.00$ 3.16 88" Snow & Light Material Bucket D (S530, S570, S590 Only) 969.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 10.00-16.5 (72" loader width) (S510, S530, S550, S570, S590) 2,250.50$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.16.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 60” Snowblower 3,006.50$ 7.2 SB200 x 66” Snowblower 3,101.00$ 7.3 SB200 x 72” Snowblower 3,202.50$ 7.4 5.5 Hydraulic Motor Package 745.50$ 7.5 6.2 Hydraulic Motor Package 745.50$ 7.6 8.0 Hydraulic Motor Package 787.50$ 7.7 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 60" Sweeper 2,597.00$ 8.2 72" Sweeper 2,894.50$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 Bob-Tach Mounted Backhoe 3,248.00$ 9.2 Hydraulic Clamp 1,092.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.3 9BH Backhoe 7,910.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 2 ½" Slot Cut Drum 871.50$ 10.5 4" Slot Cut Drum 966.00$ 10.6 6" All Purpose Drum 1,263.50$ 10.7 8" All Purpose Drum 1,263.50$ 10.8 12" All Purpose Drum 1,578.50$ 10.9 14" All Purpose Drum 1,669.50$ 10.10 16" Surface Drum 3,608.50$ 10.11 16" Fast Cut All Purpose Drum 2,075.50$ 10.12 16" Smooth Cut All Purpose Drum 2,618.00$ 10.13 18" Fast Cut All Purpose Drum 2,121.00$ 10.14 18" Smooth Cut All Purpose Drum 2,705.50$ 10.15 24" Fast Cut All Purpose Drum 2,873.50$ 10.16 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 60" Snow Blade (with hydraulic angle) 1,400.00$ 11.2 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.3 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.4 60" Snow V-Blade, 7-Pin 2,726.50$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 HB880 Breaker 4,392.50$ 12.2 Loader Mounting Frame (7113737) 469.00$ 12.3 HB980 Breaker 5,502.00$ 12.4 HOSE KIT 143.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 62" Industrial Bucket Grapple 2,250.50$ 13.4 68" Industrial Bucket Grapple 2,369.50$ 13.5 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.6 66" Root Grapple 2,089.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$ 14.22 Packer Wheel 1,414.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
14.23 66" Brushcat Rotary Cutter, Standard Flow (RC66) 4,284.00$ 14.24 66" Brushcat Rotary Cutter, High Flow (RC66HF) 4,340.00$ 14.25 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.26 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MODEL 10 AUGER DRIVE UNIT 913.50$ 16.2 MOUNTING FRAME 6812980 259.00$ 16.3 Model 15C Auger Drive Unit 1,106.00$ 16.4 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.5 Model 30C Auger Drive Unit 1,484.00$ 16.6 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.7 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.8 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.9 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 48" Vibratory Roller with Padded Drum 5,908.00$ 18.2 48" Vibratory Roller with Smooth Drum 5,764.50$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 1,540.00$ 10.02 36MONTH/3000HR 2,528.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
8 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S630
BOBCAT 2.4L T4, NET 70 HP
Y
108.4"
81.3"
8.1"
121"
Tilt 4655 lbs Lift 4000 lbs
21.4"
42°
93.2"
83.4"
66.7"
4360 lbs (ISO 14397-1)
2180 lbs (ISO 14397-1)
17.6 cu ft. ISO
7610 lbs (ISO 14397-1)
7.1 mph
24.75 gal
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
12-16.5 12 PLY Rated Heavy Duty
Prestressed #120 HSOC endless roller chain (no master link) and
sprockets in sealed chaincase with oil lubrication (Chains do not
require periodic adjustments) Two chains per side with no idler
sprocket
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 30,153.20
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
8 BASE UNIT PRICE: 30,153.20$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 7,095.90$ 2.2 A71 Option Package 4,444.30$ 2.3 A51 Option Package 3,553.20$ 2.4 A31 Option Package 3,097.50$ 2.5 H51 Option Package 2,520.00$ 2.6 O71 Option Package 1,710.10$ 2.7 O51 Option Package 1,038.80$ 2.8 O31 Option Package 593.60$ 2.9 Advanced Control System (ACS)* 1,052.80$
2.10 Selectable Joystick Control (SJC) 1,676.50$ 2.11 7 Pin Attachment Control Kit 143.50$ 2.12 High Flow Hydraulics 1,318.10$ 2.13 High Flow Hydraulics, Two Speed, Hydraulic Bucket Positioning, Engine Block Heater 2,765.00$ 2.14 Two Speed 1,107.40$ 2.15 Suspension Seat with Three Point Belt 349.30$ 2.16 Two Speed, Engine Block Heater 1,157.80$ 2.17 Two Speed, Hydraulic Bucket Positioning, Engine Block Heater 1,477.70$ 2.18 Hydraulic Bucket Positioning 327.60$ 2.19 Hydraulic Bucket Positioning, Engine Block Heater 396.20$ 2.20 Suspension Seat - Required for Two Speed if not ordering a "Cab Opt Pkg". 349.30$ 2.21 Engine Block Heater 77.70$ 2.22 Air Ride Suspension Seat 219.80$ 2.23 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 68" Constr./Ind. Bucket ¨ 679.00$ 3.2 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.3 74" Constr./Ind. Bucket 735.00$ 3.4 74" Constr./Ind. Heavy Duty Bucket 997.50$ 3.5 80" Constr./Ind. Bucket 801.50$ 3.6 80" Constr./Ind. Heavy Duty Bucket 1,074.50$ 3.7 84" Constr./Ind. Heavy Duty Bucket 1,127.00$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 10.00-16.5 (72" loader width) (S510, S530, S550, S570, S590) 2,250.50$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.16.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 66” Snowblower 3,101.00$ 7.2 SB200 x 72” Snowblower 3,202.50$ 7.3 SB200 x 78” Snowblower 3,395.00$ 7.4 SB240 x 72” Snowblower 4,284.00$ 7.5 SB240 x 84” Snowblower 4,375.00$ 7.6 5.5 Hydraulic Motor Package 745.50$ 7.7 6.2 Hydraulic Motor Package 745.50$ 7.8 8.0 Hydraulic Motor Package 787.50$ 7.9 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 72" Sweeper 2,894.50$ 8.2 84" Sweeper 3,290.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 Bob-Tach Mounted Backhoe 3,248.00$ 9.2 Hydraulic Clamp 1,092.00$ 9.3 9BH Backhoe 7,910.00$ 9.4 8811 Backhoe 8,435.00$ 9.5 Mounting Kit (7228276) 250.60$ 9.6 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.7 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.8 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.9 16" Trenching Bucket, Smooth Lip 488.60$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.10 18" Trenching Bucket, Smooth Lip 539.00$ 9.11 18" Trenching Bucket, 4 Weld-On Teeth 577.50$ 9.12 20" Trenching Bucket, Smooth Lip 546.00$ 9.13 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.14 24" Trenching Bucket, Smooth Lip 584.50$ 9.15 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.16 30" Trenching Bucket, Smooth Lip 620.90$ 9.17 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.18 36" Trenching Bucket, Smooth Lip 658.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 40" Planer, High Flow 18,032.00$ 10.5 2 ½" Slot Cut Drum 871.50$ 10.6 4" Slot Cut Drum 966.00$ 10.7 6" All Purpose Drum 1,263.50$ 10.8 8" All Purpose Drum 1,263.50$ 10.9 12" All Purpose Drum 1,578.50$ 10.10 14" All Purpose Drum 1,669.50$ 10.11 16" Surface Drum 3,608.50$ 10.12 16" Fast Cut All Purpose Drum 2,075.50$ 10.13 16" Smooth Cut All Purpose Drum 2,618.00$ 10.14 18" Fast Cut All Purpose Drum 2,121.00$ 10.15 18" Smooth Cut All Purpose Drum 2,705.50$ 10.16 24" Fast Cut All Purpose Drum 2,873.50$ 10.17 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.2 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.3 96" Snow Blade (with hydraulic angle) 1,715.00$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$ 11.12 Snow Pusher, 10' 2,383.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 Loader Mounting Frame (7113737) 469.00$ 12.2 HB980 Breaker 5,502.00$ 12.3 HOSE KIT 143.50$ 12.4 HB1180 Breaker 7,234.50$ 12.5 Loader Mounting Frame (7115937) 535.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 68" Industrial Bucket Grapple 2,369.50$ 13.4 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.5 66" Root Grapple 2,089.50$ 13.6 72" Root Grapple 2,303.00$ 13.7 82" Root Grapple 2,523.50$ 13.8 74" Industrial Bucket Grapple 2,509.50$ 13.9 78" Industrial Fork Grapple, with 8 teeth 3,566.50$ 13.10 80" Industrial Bucket Grapple 3,426.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
14.22 Packer Wheel 1,414.00$ 14.23 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.24 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$ 14.25 80" Brushcat Rotary Cutter, High Flow (RC80) 4,837.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MOUNTING FRAME 6812980 259.00$ 16.2 Model 15C Auger Drive Unit 1,106.00$ 16.3 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.4 Model 30C Auger Drive Unit 1,484.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.6 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.7 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.8 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 73" Vibratory Roller with Padded Drum 6,811.00$ 18.2 73" Vibratory Roller with Smooth Drum 6,629.00$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 2,154.00$ 10.02 36MONTH/3000HR 3,646.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
9 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S650
BOBCAT 2.4L T4, NET 70 HP
Y
108.4"
81.3"
8.1"
124"
Tilt 5138 lbs Lift 5080 lbs
31.5"
42°
96.3"
82.9"
66.7"
5380 lbs (ISO 14397-1)
2690 lbs (ISO 14397-1)
17.6 cu ft. ISO
8061 lbs (ISO 14397-1)
7.1 mph
24.75 gal
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
12-16.5 12 PLY Rated Heavy Duty
Prestressed #120 HSOC endless roller chain (no master link) and
sprockets in sealed chaincase with oil lubrication (Chains do not
require periodic adjustments) Two chains per side with no idler
sprocket
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 31,821.30
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
9 BASE UNIT PRICE: 31,821.30$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 7,095.90$ 2.2 A71 Option Package 4,444.30$ 2.3 A51 Option Package 3,553.20$ 2.4 A31 Option Package 3,097.50$ 2.5 H51 Option Package 2,520.00$ 2.6 O71 Option Package 1,710.10$ 2.7 O51 Option Package 1,038.80$ 2.8 O31 Option Package 593.60$ 2.9 Advanced Control System (ACS)* 1,052.80$
2.10 Selectable Joystick Control (SJC) 1,676.50$ 2.11 7 Pin Attachment Control Kit 143.50$ 2.12 High Flow Hydraulics 1,318.10$ 2.13 High Flow Hydraulics, Two Speed, Hydraulic Bucket Positioning, Engine Block Heater 2,765.00$ 2.14 Two Speed 1,107.40$ 2.15 Suspension Seat with Three Point Belt 349.30$ 2.16 Two Speed, Engine Block Heater 1,157.80$ 2.17 Two Speed, Hydraulic Bucket Positioning, Engine Block Heater 1,477.70$ 2.18 Hydraulic Bucket Positioning 327.60$ 2.19 Hydraulic Bucket Positioning, Engine Block Heater 396.20$ 2.20 Suspension Seat - Required for Two Speed if not ordering a "Cab Opt Pkg". 349.30$ 2.21 Engine Block Heater 77.70$ 2.22 Air Ride Suspension Seat 219.80$ 2.23 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 68" Constr./Ind. Bucket ¨ 679.00$ 3.2 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.3 74" Constr./Ind. Bucket 735.00$ 3.4 74" Constr./Ind. Heavy Duty Bucket 997.50$ 3.5 80" Constr./Ind. Bucket 801.50$ 3.6 80" Constr./Ind. Heavy Duty Bucket 1,074.50$ 3.7 84" Constr./Ind. Heavy Duty Bucket 1,127.00$ 3.8 68" Low Profile Bucket ¨ (for use with offset rims only) 686.00$ 3.9 74" Low Profile Bucket ¨ 745.50$
3.10 80" Low Profile Bucket ¨ 812.00$ 3.11 68" Snow & Light Material Bucket D 784.00$ 3.12 74" Snow & Light Material Bucket D 801.50$ 3.13 80" Snow & Light Material Bucket D 910.00$ 3.14 88" Snow & Light Material Bucket D 969.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 12.00-16.5 (79" loader width) 2,317.00$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.16.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 66” Snowblower 3,101.00$ 7.2 SB200 x 72” Snowblower 3,202.50$ 7.3 SB200 x 78” Snowblower 3,395.00$ 7.4 SB240 x 72” Snowblower 4,284.00$ 7.5 SB240 x 84” Snowblower 4,375.00$ 7.6 5.5 Hydraulic Motor Package 745.50$ 7.7 6.2 Hydraulic Motor Package 745.50$ 7.8 8.0 Hydraulic Motor Package 787.50$ 7.9 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 72" Sweeper 2,894.50$ 8.2 84" Sweeper 3,290.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 Bob-Tach Mounted Backhoe 3,248.00$ 9.2 Hydraulic Clamp 1,092.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.3 9BH Backhoe 7,910.00$ 9.4 8811 Backhoe 8,435.00$ 9.5 Mounting Kit (7228276) 250.60$ 9.6 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.7 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.8 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.9 16" Trenching Bucket, Smooth Lip 488.60$
9.10 18" Trenching Bucket, Smooth Lip 539.00$ 9.11 18" Trenching Bucket, 4 Weld-On Teeth 577.50$ 9.12 20" Trenching Bucket, Smooth Lip 546.00$ 9.13 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.14 24" Trenching Bucket, Smooth Lip 584.50$ 9.15 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.16 30" Trenching Bucket, Smooth Lip 620.90$ 9.17 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.18 36" Trenching Bucket, Smooth Lip 658.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 40" Planer, High Flow 18,032.00$ 10.5 2 ½" Slot Cut Drum 871.50$ 10.6 4" Slot Cut Drum 966.00$ 10.7 6" All Purpose Drum 1,263.50$ 10.8 8" All Purpose Drum 1,263.50$ 10.9 12" All Purpose Drum 1,578.50$ 10.10 14" All Purpose Drum 1,669.50$ 10.11 16" Surface Drum 3,608.50$ 10.12 16" Fast Cut All Purpose Drum 2,075.50$ 10.13 16" Smooth Cut All Purpose Drum 2,618.00$ 10.14 18" Fast Cut All Purpose Drum 2,121.00$ 10.15 18" Smooth Cut All Purpose Drum 2,705.50$ 10.16 24" Fast Cut All Purpose Drum 2,873.50$ 10.17 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.2 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.3 96" Snow Blade (with hydraulic angle) 1,715.00$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$ 11.12 Snow Pusher, 10' 2,383.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 Loader Mounting Frame (7113737) 469.00$ 12.2 HB980 Breaker 5,502.00$ 12.3 HOSE KIT 143.50$ 12.4 HB1180 Breaker 7,234.50$ 12.5 Loader Mounting Frame (7115937) 535.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 68" Industrial Bucket Grapple 2,369.50$ 13.4 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.5 66" Root Grapple 2,089.50$ 13.6 72" Root Grapple 2,303.00$ 13.7 82" Root Grapple 2,523.50$ 13.8 74" Industrial Bucket Grapple 2,509.50$ 13.9 78" Industrial Fork Grapple, with 8 teeth 3,566.50$ 13.10 80" Industrial Bucket Grapple 3,426.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$ 14.22 Packer Wheel 1,414.00$ 14.23 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.24 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$ 14.25 80" Brushcat Rotary Cutter, High Flow (RC80) 4,837.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MOUNTING FRAME 6812980 259.00$ 16.2 Model 15C Auger Drive Unit 1,106.00$ 16.3 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.4 Model 30C Auger Drive Unit 1,484.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.6 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.7 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.8 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 73" Vibratory Roller with Padded Drum 6,811.00$ 18.2 73" Vibratory Roller with Smooth Drum 6,629.00$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 2,273.00$ 10.02 36MONTH/3000HR 3,847.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
10 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S750 T4
Bobcat 3.4L T4 NET 81 HP
Y
114.3"
81.3"
8.1"
132"
Tilt 5983 lbs Lift 5496 lbs
31.5"
42°
104.4"
85.8"
69.7"
6400 lbs (ISO 14397-1)
3200 lbs (ISO 14397-1)
17.6 cu ft. ISO
8730 lbs (ISO 14397-1)
7.1 mph
27.2 gal
Optional
950 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
12-16.5 12 PLY Rated Heavy Duty
Prestressed #120 HSOC endless roller chain (no master link) and
sprockets in sealed chaincase with oil lubrication (Chains do not
require periodic adjustments) Two chains per side with no idler
sprocket
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 39,700.50
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
10 BASE UNIT PRICE: 39,700.50$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 7,095.90$ 2.2 A71 Option Package 4,444.30$ 2.3 A51 Option Package 3,553.20$ 2.4 A31 Option Package 3,097.50$ 2.5 H51 Option Package 2,520.00$ 2.6 O71 Option Package 1,710.10$ 2.7 O51 Option Package 1,038.80$ 2.8 O31 Option Package 593.60$ 2.9 Advanced Control System (ACS)* 1,052.80$
2.10 Selectable Joystick Control (SJC) 1,676.50$ 2.11 7 Pin Attachment Control Kit 143.50$ 2.12 High Flow Hydraulics 1,318.10$ 2.13 High Flow Hydraulics, Two Speed, Hydraulic Bucket Positioning, Engine Block Heater 2,765.00$ 2.14 Two Speed 1,107.40$ 2.15 Suspension Seat with Three Point Belt 349.30$ 2.16 Two Speed, Engine Block Heater 1,157.80$ 2.17 Two Speed, Hydraulic Bucket Positioning, Engine Block Heater 1,477.70$ 2.18 Hydraulic Bucket Positioning 327.60$ 2.19 Hydraulic Bucket Positioning, Engine Block Heater 396.20$ 2.20 Suspension Seat - Required for Two Speed if not ordering a "Cab Opt Pkg". 349.30$ 2.21 Engine Block Heater 77.70$ 2.22 Air Ride Suspension Seat 219.80$ 2.23 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 68" Constr./Ind. Bucket ¨ 679.00$ 3.2 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.3 74" Constr./Ind. Bucket 735.00$ 3.4 74" Constr./Ind. Heavy Duty Bucket 997.50$ 3.5 80" Constr./Ind. Bucket 801.50$ 3.6 80" Constr./Ind. Heavy Duty Bucket 1,074.50$ 3.7 84" Constr./Ind. Heavy Duty Bucket 1,127.00$ 3.8 68" Low Profile Bucket ¨ (for use with offset rims only) 686.00$ 3.9 74" Low Profile Bucket ¨ 745.50$
3.10 80" Low Profile Bucket ¨ 812.00$ 3.11 68" Snow & Light Material Bucket D 784.00$ 3.12 74" Snow & Light Material Bucket D 801.50$ 3.13 80" Snow & Light Material Bucket D 910.00$ 3.14 88" Snow & Light Material Bucket D 969.50$ 3.15 100" Snow & Light Material Bucket ¨ 1,263.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 12.00-16.5 (79" loader width) 2,870.00$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.1 Bob-tach Standard6.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 66” Snowblower 3,101.00$ 7.2 SB200 x 72” Snowblower 3,202.50$ 7.3 SB200 x 78” Snowblower 3,395.00$ 7.4 SB240 x 72” Snowblower 4,284.00$ 7.5 SB240 x 84” Snowblower 4,375.00$ 7.6 5.5 Hydraulic Motor Package 745.50$ 7.7 6.2 Hydraulic Motor Package 745.50$ 7.8 8.0 Hydraulic Motor Package 787.50$ 7.9 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 72" Sweeper 2,894.50$ 8.2 84" Sweeper 3,290.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 8811 Backhoe 8,435.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.2 Mounting Kit (7168488) 252.00$ 9.3 Bob-Tach Adapter Kit (Spacer) 413.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$ 9.17 Frost & Rock Ripper 665.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 40" Planer, High Flow 18,032.00$ 10.5 2 ½" Slot Cut Drum 871.50$ 10.6 4" Slot Cut Drum 966.00$ 10.7 6" All Purpose Drum 1,263.50$ 10.8 8" All Purpose Drum 1,263.50$ 10.9 12" All Purpose Drum 1,578.50$ 10.10 14" All Purpose Drum 1,669.50$ 10.11 16" Surface Drum 3,608.50$ 10.12 16" Fast Cut All Purpose Drum 2,075.50$ 10.13 16" Smooth Cut All Purpose Drum 2,618.00$ 10.14 18" Fast Cut All Purpose Drum 2,121.00$ 10.15 18" Smooth Cut All Purpose Drum 2,705.50$ 10.16 24" Fast Cut All Purpose Drum 2,873.50$ 10.17 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.2 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.3 96" Snow Blade (with hydraulic angle) 1,715.00$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$ 11.12 Snow Pusher, 10' 2,383.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 Loader Mounting Frame (7113737) 469.00$ 12.2 HB980 Breaker 5,502.00$ 12.3 HOSE KIT 143.50$ 12.4 HB1180 Breaker 7,234.50$ 12.5 Loader Mounting Frame (7115937) 535.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 68" Industrial Bucket Grapple 2,369.50$ 13.4 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.5 66" Root Grapple 2,089.50$ 13.6 72" Root Grapple 2,303.00$ 13.7 82" Root Grapple 2,523.50$ 13.8 74" Industrial Bucket Grapple 2,509.50$ 13.9 78" Industrial Fork Grapple, with 8 teeth 3,566.50$ 13.10 80" Industrial Bucket Grapple 3,426.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$ 14.22 Packer Wheel 1,414.00$ 14.23 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.24 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$ 14.25 80" Brushcat Rotary Cutter, High Flow (RC80) 4,837.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MOUNTING FRAME 6812980 259.00$ 16.2 Model 15C Auger Drive Unit 1,106.00$ 16.3 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.4 Model 30C Auger Drive Unit 1,484.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.6 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.7 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.8 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 73" Vibratory Roller with Padded Drum 6,811.00$ 18.2 73" Vibratory Roller with Smooth Drum 6,629.00$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 2,272.00$ 10.02 36MONTH/3000HR 4,430.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
11 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S770 T4
Bobcat 3.4L T4 NET 81 HP
Y
114.3"
81.3"
8.1"
132"
Tilt 5385 lbs Lift 5490 lbs
31.5"
42°
104.3"
85.8"
69.7"
6700 lbs (ISO 14397-1)
3350 lbs (ISO 14397-1)
17.6 cu ft. ISO
9175 lbs
7.1 mph
27.2 gal
Optional
950 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
12-16.5 12 PLY Rated Heavy Duty
Prestressed #120 HSOC endless roller chain (no master link) and
sprockets in sealed chaincase with oil lubrication (Chains do not
require periodic adjustments) Two chains per side with no idler
sprocket
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 40,837.30
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
11 BASE UNIT PRICE: 40,837.30$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 7,095.90$ 2.2 A71 Option Package 4,444.30$ 2.3 A51 Option Package 3,553.20$ 2.4 A31 Option Package 3,097.50$ 2.5 H51 Option Package 2,520.00$ 2.6 O71 Option Package 1,710.10$ 2.7 O51 Option Package 1,038.80$ 2.8 O31 Option Package 593.60$ 2.9 Advanced Control System (ACS)* 1,052.80$
2.10 Selectable Joystick Control (SJC) 1,676.50$ 2.11 7 Pin Attachment Control Kit 143.50$ 2.12 High Flow Hydraulics 1,318.10$ 2.13 High Flow Hydraulics, Two Speed, Hydraulic Bucket Positioning, Engine Block Heater 2,765.00$ 2.14 Two Speed 1,107.40$ 2.15 Suspension Seat with Three Point Belt 349.30$ 2.16 Two Speed, Engine Block Heater 1,157.80$ 2.17 Two Speed, Hydraulic Bucket Positioning, Engine Block Heater 1,477.70$ 2.18 Hydraulic Bucket Positioning 327.60$ 2.19 Hydraulic Bucket Positioning, Engine Block Heater 396.20$ 2.20 Suspension Seat - Required for Two Speed if not ordering a "Cab Opt Pkg". 349.30$ 2.21 Engine Block Heater 77.70$ 2.22 Air Ride Suspension Seat 219.80$ 2.23 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 68" Constr./Ind. Bucket ¨ 679.00$ 3.2 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.3 74" Constr./Ind. Bucket 735.00$ 3.4 74" Constr./Ind. Heavy Duty Bucket 997.50$ 3.5 80" Constr./Ind. Bucket 801.50$ 3.6 80" Constr./Ind. Heavy Duty Bucket 1,074.50$ 3.7 84" Constr./Ind. Heavy Duty Bucket 1,127.00$ 3.8 68" Low Profile Bucket ¨ (for use with offset rims only) 686.00$ 3.9 74" Low Profile Bucket ¨ 745.50$
3.10 80" Low Profile Bucket ¨ 812.00$ 3.11 68" Snow & Light Material Bucket D 784.00$ 3.12 74" Snow & Light Material Bucket D 801.50$ 3.13 80" Snow & Light Material Bucket D 910.00$ 3.14 88" Snow & Light Material Bucket D 969.50$ 3.15 100" Snow & Light Material Bucket ¨ 1,263.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 12.00-16.5 (79" loader width) 2,870.00$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.1 Bob-Tach Standard6.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 66” Snowblower 3,101.00$ 7.2 SB200 x 72” Snowblower 3,202.50$ 7.3 SB200 x 78” Snowblower 3,395.00$ 7.4 SB240 x 72” Snowblower 4,284.00$ 7.5 SB240 x 84” Snowblower 4,375.00$ 7.6 5.5 Hydraulic Motor Package 745.50$ 7.7 6.2 Hydraulic Motor Package 745.50$ 7.8 8.0 Hydraulic Motor Package 787.50$ 7.9 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 72" Sweeper 2,894.50$ 8.2 84" Sweeper 3,290.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 8811 Backhoe 8,435.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.2 Mounting Kit (7168488) 252.00$ 9.3 Bob-Tach Adapter Kit (Spacer) 413.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$ 9.17 Frost & Rock Ripper 665.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 40" Planer, High Flow 18,032.00$ 10.5 2 ½" Slot Cut Drum 871.50$ 10.6 4" Slot Cut Drum 966.00$ 10.7 6" All Purpose Drum 1,263.50$ 10.8 8" All Purpose Drum 1,263.50$ 10.9 12" All Purpose Drum 1,578.50$ 10.10 14" All Purpose Drum 1,669.50$ 10.11 16" Surface Drum 3,608.50$ 10.12 16" Fast Cut All Purpose Drum 2,075.50$ 10.13 16" Smooth Cut All Purpose Drum 2,618.00$ 10.14 18" Fast Cut All Purpose Drum 2,121.00$ 10.15 18" Smooth Cut All Purpose Drum 2,705.50$ 10.16 24" Fast Cut All Purpose Drum 2,873.50$ 10.17 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.2 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.3 96" Snow Blade (with hydraulic angle) 1,715.00$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$ 11.12 Snow Pusher, 10' 2,383.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 Loader Mounting Frame (7113737) 469.00$ 12.2 HB980 Breaker 5,502.00$ 12.3 HOSE KIT 143.50$ 12.4 HB1180 Breaker 7,234.50$ 12.5 Loader Mounting Frame (7115937) 535.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 68" Industrial Bucket Grapple 2,369.50$ 13.4 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.5 66" Root Grapple 2,089.50$ 13.6 72" Root Grapple 2,303.00$ 13.7 82" Root Grapple 2,523.50$ 13.8 74" Industrial Bucket Grapple 2,509.50$ 13.9 78" Industrial Fork Grapple, with 8 teeth 3,566.50$ 13.10 80" Industrial Bucket Grapple 3,426.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$ 14.22 Packer Wheel 1,414.00$ 14.23 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.24 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$ 14.25 80" Brushcat Rotary Cutter, High Flow (RC80) 4,837.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MOUNTING FRAME 6812980 259.00$ 16.2 Model 15C Auger Drive Unit 1,106.00$ 16.3 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.4 Model 30C Auger Drive Unit 1,484.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.6 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.7 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.8 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 73" Vibratory Roller with Padded Drum 6,811.00$ 18.2 73" Vibratory Roller with Smooth Drum 6,629.00$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 2,562.00$ 10.02 36MONTH/3000HR 4,996.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
12 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S850 T4
Bobcat 3.4L T4 NET 88 HP
Y
119.3"
83.4"
9.4"
144"
Tilt 6975 lbs Lift 6933 lbs
29.7"
42°
116.2"
89"
71.9"
7900 lbs (ISO 14397-1)
3950 lbs (ISO 14397-1)
19.1 cu ft. ISO
10,008 lbs
7.1 mph
32.8 gal
Optional
950 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
14.00-17.5 14 PLY Rated Heavy Duty
Prestressed #120 HSOC endless roller chain (no master link) and
sprockets in sealed chaincase with oil lubrication (Chains do not
require periodic adjustments) Two chains per side with no idler
sprocket
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 46,925.20
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
12 BASE UNIT PRICE: 46,925.20$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments.
2.1 A91 Option Package 6,148.80$ 2.2 A71 Option Package 4,444.30$ 2.3 A51 Option Package 3,553.20$ 2.4 A31 Option Package 3,097.50$ 2.5 H51 Option Package 2,520.00$ 2.6 O71 Option Package 1,710.10$ 2.7 O51 Option Package 1,038.80$ 2.8 O31 Option Package 593.60$ 2.9 Advanced Control System (ACS)* 1,052.80$
2.10 Selectable Joystick Control (SJC) 906.50$ 2.11 7 Pin Attachment Control Kit 143.50$ 2.12 High Flow Hydraulics 1,318.10$ 2.13 Hydraulic Bucket Positioning 327.60$ 2.14 Hydraulic Bucket Positioning, Engine Block Heater 396.20$ 2.15 Engine Block Heater 77.70$ 2.16 Air Ride Suspension Seat 219.80$ 2.17 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.2 80" Constr./Ind. Heavy Duty Bucket 1,074.50$ 3.3 84" Constr./Ind. Heavy Duty Bucket 1,127.00$ 3.4 88" Constr./Ind. Heavy Duty Bucket ¨ 1,179.50$ 3.5 82" Constr./Ind. Severe Duty Bucket ¨ 1,288.00$ 3.6 88" Constr./Ind. Severe Duty Bucket 1,382.50$ 3.7 80" Snow & Light Material Bucket D 910.00$ 3.8 88" Snow & Light Material Bucket D 969.50$ 3.9 100" Snow & Light Material Bucket ¨ 1,263.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 14.00-17.5 (86" loader width) 3,321.50$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.1 Bob-Tach Standard6.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 66” Snowblower 3,101.00$ 7.2 SB200 x 72” Snowblower 3,202.50$ 7.3 SB200 x 78” Snowblower 3,395.00$ 7.4 SB240 x 72” Snowblower 4,284.00$ 7.5 SB240 x 84” Snowblower 4,375.00$ 7.6 5.5 Hydraulic Motor Package 745.50$ 7.7 6.2 Hydraulic Motor Package 745.50$ 7.8 8.0 Hydraulic Motor Package 787.50$ 7.9 9.6 Hydraulic Motor Package 833.00$
7.10 SBX240 x 72” (blower includes hyd motor pkg) 37 GPM high flow only 5,481.00$ 7.11 SBX240 x 84” (blower includes hyd motor pkg) 37 GPM high flow only 5,582.50$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 72" Sweeper 2,894.50$ 8.2 84" Sweeper 3,290.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 8811 Backhoe 8,435.00$ 9.2 Mounting Kit (7168488) 252.00$ 9.3 Bob-Tach Adapter Kit (Spacer) 413.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$ 9.17 Frost & Rock Ripper 665.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 40" Planer, High Flow 18,032.00$ 10.5 2 ½" Slot Cut Drum 871.50$ 10.6 4" Slot Cut Drum 966.00$ 10.7 6" All Purpose Drum 1,263.50$ 10.8 8" All Purpose Drum 1,263.50$ 10.9 12" All Purpose Drum 1,578.50$ 10.10 14" All Purpose Drum 1,669.50$ 10.11 16" Surface Drum 3,608.50$ 10.12 16" Fast Cut All Purpose Drum 2,075.50$ 10.13 16" Smooth Cut All Purpose Drum 2,618.00$ 10.14 18" Fast Cut All Purpose Drum 2,121.00$ 10.15 18" Smooth Cut All Purpose Drum 2,705.50$ 10.16 24" Fast Cut All Purpose Drum 2,873.50$ 10.17 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.2 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.3 96" Snow Blade (with hydraulic angle) 1,715.00$ 11.4 108" Snow Blade – Heavy Duty (with hydraulic angle) 2,917.60$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$ 11.12 Snow Pusher, 10' 2,383.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 Loader Mounting Frame (7113737) 469.00$ 12.2 HB980 Breaker 5,502.00$ 12.3 HOSE KIT 143.50$ 12.4 HB1180 Breaker 7,234.50$ 12.5 Loader Mounting Frame (7115937) 535.50$
13.0 Grapple:Use this section to offer grapple options.
13.7 82" Root Grapple 2,523.50$ 13.9 78" Industrial Fork Grapple, with 8 teeth 3,566.50$ 13.10 80" Industrial Bucket Grapple 3,426.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 90" Mower 3,748.50$ 14.2 84" Soil Conditioner, Hydraulic Angle and depth 6,433.00$ 14.3 84" Soil Conditioner, High Flow Hydraulic Angle and Depth 6,713.00$ 14.4 SP5 Spreader 1,452.50$ 14.5 HS8 Spreader 2,348.50$ 14.6 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.7 Adjustable Deflector 84.00$ 14.8 Gate Assembly Kit 129.50$ 14.9 Vibrator Kit 301.00$ 14.14 Sod Layer 2,604.00$ 14.15 SG60 Stump Grinder 6,013.00$ 14.16 SGX60 Stump Grinder 6,223.00$ 14.17 Packer Wheel 1,414.00$ 14.20 80" Brushcat Rotary Cutter, High Flow (RC80) 4,837.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader,96" 9,044.00$ 15.2 Grader, 108" 9,352.00$ 15.3 Laser Mounting Kit 640.50$ 15.4 Sonic Tracer and Slope Sensor Mounting Kit 1,186.50$ 15.5 Sonic Tracer and Slope Sensor Package 6,331.50$ 15.6 End Wing Kit 297.50$
16.0 Auger:Use this section to offer auger options.
16.1 MOUNTING FRAME 6812980 259.00$ 16.2 Model 15C Auger Drive Unit 1,106.00$ 16.3 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.4 Model 30C Auger Drive Unit 1,484.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
16.6 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.7 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.8 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 73" Vibratory Roller with Padded Drum 6,811.00$ 18.2 73" Vibratory Roller with Smooth Drum 6,629.00$
19.0 Other:Use this section to offer any other option not already covered.
19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 2,837.00$ 10.02 36MONTH/3000HR 5,531.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
13 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT T450
BOBCAT 2.4L TIER 4 NET 58HP
Y
98.4"
77.8"
8.4"
109.5"
Tilt 3588 lbs Lift 3450 lbs
23.5"
40°
83.8"
77.4"
58.2"
4000 lbs (ISO 14397-1)
1400 lbs (ISO 14397-1)
14.5 cu ft. ISO
6148 lbs (ISO 14397-1) (SAEJ818)
7.3 mph
17.3 gal.
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
11.8" Rubber Tracks
Fully Hydrostatic drive. Hydrostatic piston pumps shall be belt driven
from the engine.- Drive belt shall not require any
adjustments.
No required periodic adjustments
Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
Setting
Engine Driven, Gear type, 16.7 gpm, 3350 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard Equipment
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 31,589.60
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
13 BASE UNIT PRICE: 31,589.60$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A81 Option Package 5,394.20$ 2.2 O71 Option Package 1,438.50$ 2.4 Advanced Control System (ACS)* 980.70$ 2.5 Selectable Joystick Control (SJC) 1,788.50$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 56" Constr./Ind. Bucket ¨ 658.00$ 3.2 62" Constr./Ind. Bucket ¨ 598.50$ 3.3 68" Constr./Ind. Bucket ¨ 679.00$ 3.4 54" Fertilizer & Grain Bucket D 563.50$ 3.5 60" Fertilizer & Grain Bucket D 574.00$ 3.6 56" General Purpose Bucket ¨ 451.50$ 3.7 62" General Purpose Bucket ¨ 476.00$ 3.8 68" General Purpose Bucket ¨ 486.50$ 3.9 74" General Purpose Bucket ¨ 518.00$
3.10 56" Low Profile Bucket ¨ 665.00$ 3.11 62" Low Profile Bucket ¨ 609.00$ 3.12 68" Low Profile Bucket ¨ 686.00$ 3.13 68" Snow & Light Material Bucket D 784.00$ 3.14 74" Snow & Light Material Bucket D 829.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 N/A4.2
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.1 Bob-Tach Standard6.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 60” Snowblower 3,006.50$ SB200 x 66” Snowblower 3,101.00$ SB200 x 72” Snowblower 3,202.50$ 5.5 Hydraulic Motor Package 745.50$ 6.2 Hydraulic Motor Package 745.50$ 8.0 Hydraulic Motor Package 787.50$ 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 54" Sweeper 2,387.00$ 8.2 60" Sweeper 2,597.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 N/A9.2
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 2 ½" Slot Cut Drum 871.50$ 10.3 4" Slot Cut Drum 966.00$ 10.4 6" All Purpose Drum 1,263.50$ 10.5 8" All Purpose Drum 1,263.50$ 10.6 12" All Purpose Drum 1,578.50$ 10.7 14" All Purpose Drum 1,669.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 60" Snow Blade (with hydraulic angle) 1,400.00$ 11.2 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.3 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.4 60" Snow V-Blade 2,460.50$ 11.5 60" Snow V-Blade, 7-Pin 2,726.50$ 11.6 72" Snow V-Blade 2,912.00$ 11.7 84" Snow V-Blade 2,978.50$ 11.8 Snow Pusher, 8' 2,166.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 HB880 Breaker 4,392.50$ 12.2 Loader Mounting Frame (7113737) 469.00$ 12.3 HB980 Breaker 5,502.00$ 12.4 HOSE KIT 143.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 62" Industrial Bucket Grapple 2,250.50$ 13.4 68" Industrial Bucket Grapple 2,369.50$ 13.5 66" Industrial Fork Grapple, with 7 teeth 2,772.00$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 72" Mower 3,426.50$ 14.3 60" Soil Conditioner, Manual Angle 3,426.50$ 14.4 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.5 72" Soil Conditioner, Manual Angle 5,600.00$ 14.6 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.7 SP5 Spreader 1,452.50$ 14.8 HS8 Spreader 2,348.50$ 14.9 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.10 Adjustable Deflector 84.00$ 14.11 Gate Assembly Kit 129.50$ 14.12 Vibrator Kit 301.00$ 14.13 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.14 72" Basic Landplane Leveling Attachment 931.00$ 14.15 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.16 78" Basic Landplane Leveling Attachment 1,011.50$ 14.17 66" Brushcat Rotary Cutter, Standard Flow (RC66) 4,284.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MODEL 10 AUGER DRIVE UNIT 913.50$ 16.2 MOUNTING FRAME 6812980 259.00$ 16.3 Model 15C Auger Drive Unit 1,106.00$ 16.4 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 N/A17.2
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 48" Vibratory Roller with Padded Drum 5,908.00$ 18.2 48" Vibratory Roller with Smooth Drum 5,764.50$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 2,708.00$ 10.02 36MONTH/3000HR 4,541.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
14 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT T550
BOBCAT 2.4L T4, NET 65 HP
Y
104.6"
77.8"
7.3"
114.5"
Tilt 4540 lbs Lift 4431 lbs
19.3"
42°
86.8"
80.0"
63.1"
5700 lbs (ISO 14397-1)(SAE J818)
1995 lbs (ISO 14397-1) (SAE J818)
16.0 cu ft. ISO
7662 lbs (ISO 14397-1)(SAE J818)
7.32 mph
24.75 gal
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
12.6" Rubber Tracks
Fully Hydrostatic drive. Hydrostatic piston pumps shall be belt driven
from the engine.- Drive belt shall not require any
adjustments.
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 34,493.20
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
14 BASE UNIT PRICE: 34,493.20$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 5,591.60$ 2.2 A71 Option Package 4,092.90$ 2.3 A51 Option Package 3,228.40$ 2.4 A31 Option Package 2,783.20$ 2.5 H51 Option Package 2,223.90$ 2.6 O71 Option Package 1,438.50$ 2.7 O51 Option Package 785.40$ 2.8 Advanced Control System (ACS)* 980.70$ 2.9 Selectable Joystick Control (SJC) 1,788.50$
2.10 7 Pin Attachment Control Kit 143.50$ 2.11 High Flow Hydraulics 1,099.70$ 2.12 Hydraulic Bucket Positioning 327.60$ 2.13 Hydraulic Bucket Positioning, Cold Weather Pkg 457.10$ 2.14 Cold Weather Pkg (Incls Eng Block Heater and Larger Battery (950 cca)) 140.00$ 2.15 Air Ride Suspension Seat 219.80$ 2.16 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 62" Constr./Ind. Bucket ¨ 598.50$ 3.2 68" Constr./Ind. Bucket ¨ 679.00$ 3.3 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.4 74" Constr./Ind. Bucket 735.00$ 3.5 60" Fertilizer & Grain Bucket D 574.00$ 3.6 66" Fertilizer & Grain Bucket D 714.00$ 3.7 62" General Purpose Bucket ¨ 476.00$ 3.8 68" General Purpose Bucket ¨ 486.50$ 3.9 74" General Purpose Bucket ¨ 518.00$
3.10 62" Low Profile Bucket ¨ 609.00$ 3.11 68" Low Profile Bucket ¨ 686.00$ 3.12 74" Low Profile Bucket 745.50$ 3.13 68" Snow & Light Material Bucket D 784.00$ 3.14 74" Snow & Light Material Bucket D 829.50$ 3.15 80" Snow & Light Material Bucket D 910.00$ 3.16 88" Snow & Light Material Bucket D (S530, S570, S590 Only) 969.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 N/A
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.1 Bob-Tach Standard6.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 60” Snowblower 3,006.50$ 7.2 SB200 x 66” Snowblower 3,101.00$ 7.3 SB200 x 72” Snowblower 3,202.50$ 7.4 5.5 Hydraulic Motor Package 745.50$ 7.5 6.2 Hydraulic Motor Package 745.50$ 7.6 8.0 Hydraulic Motor Package 787.50$ 7.7 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 60" Sweeper 2,597.00$ 8.2 72" Sweeper 2,894.50$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 Bob-Tach Mounted Backhoe 3,248.00$ 9.2 Hydraulic Clamp 1,092.00$ 9.3 9BH Backhoe 7,910.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 2 ½" Slot Cut Drum 871.50$ 10.5 4" Slot Cut Drum 966.00$ 10.6 6" All Purpose Drum 1,263.50$ 10.7 8" All Purpose Drum 1,263.50$ 10.8 12" All Purpose Drum 1,578.50$ 10.9 14" All Purpose Drum 1,669.50$ 10.10 16" Surface Drum 3,608.50$ 10.11 16" Fast Cut All Purpose Drum 2,075.50$ 10.12 16" Smooth Cut All Purpose Drum 2,618.00$ 10.13 18" Fast Cut All Purpose Drum 2,121.00$ 10.14 18" Smooth Cut All Purpose Drum 2,705.50$ 10.15 24" Fast Cut All Purpose Drum 2,873.50$ 10.16 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 60" Snow Blade (with hydraulic angle) 1,400.00$ 11.2 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.3 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.4 60" Snow V-Blade, 7-Pin 2,726.50$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 HB880 Breaker 4,392.50$ 12.2 Loader Mounting Frame (7113737) 469.00$ 12.3 HB980 Breaker 5,502.00$ 12.4 HOSE KIT 143.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 62" Industrial Bucket Grapple 2,250.50$ 13.4 68" Industrial Bucket Grapple 2,369.50$ 13.5 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.6 66" Root Grapple 2,089.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$ 14.22 Packer Wheel 1,414.00$ 14.23 66" Brushcat Rotary Cutter, Standard Flow (RC66) 4,284.00$ 14.24 66" Brushcat Rotary Cutter, High Flow (RC66HF) 4,340.00$ 14.25 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.26 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$
15.0 Grader:Use this section to offer grader options.
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MODEL 10 AUGER DRIVE UNIT 913.50$ 16.2 MOUNTING FRAME 6812980 259.00$ 16.3 Model 15C Auger Drive Unit 1,106.00$ 16.4 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.5 Model 30C Auger Drive Unit 1,484.00$ 16.6 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.7 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.8 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.9 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 48" Vibratory Roller with Padded Drum 5,908.00$ 18.2 48" Vibratory Roller with Smooth Drum 5,764.50$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 2,957.00$ 10.02 36MONTH/3000HR 4,958.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
15 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT S590
BOBCAT 2.4L T4, NET 65 HP
Y
104.6"
77.8"
7.3"
119.0"
Tilt 4712 lbs Lift 4554 lbs
34.9"
42°
91.3"
80.0"
63.1"
6000 lbs (ISO 14397-1)(SAE J818)
2100 lbs (ISO 14397-1)(SAE J818)
16.0 cu ft. ISO
7870 lbs (ISO 14397-1)
7.32 mph
24.75 gal
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
12.6" Rubber Tracks
Fully Hydrostatic drive. Hydrostatic piston pumps shall be belt driven
from the engine.- Drive belt shall not require any
adjustments.
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 37,066.40
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
15 BASE UNIT PRICE: 37,066.40$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments.
2.1 A91 Option Package 5,591.60$ 2.2 A71 Option Package 4,092.90$ 2.3 A51 Option Package 3,228.40$ 2.4 A31 Option Package 2,783.20$ 2.5 H51 Option Package 2,223.90$ 2.6 O71 Option Package 1,438.50$ 2.7 O51 Option Package 785.40$ 2.8 Advanced Control System (ACS)* 980.70$ 2.9 Selectable Joystick Control (SJC) 1,788.50$
2.10 7 Pin Attachment Control Kit 143.50$ 2.11 High Flow Hydraulics 1,099.70$ 2.12 Hydraulic Bucket Positioning 327.60$ 2.13 Hydraulic Bucket Positioning, Cold Weather Pkg 457.10$ 2.14 Cold Weather Pkg (Incls Eng Block Heater and Larger Battery (950 cca)) 140.00$ 2.15 Air Ride Suspension Seat 219.80$ 2.16 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 62" Constr./Ind. Bucket ¨ 598.50$ 3.2 68" Constr./Ind. Bucket ¨ 679.00$ 3.3 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.4 74" Constr./Ind. Bucket 735.00$ 3.5 60" Fertilizer & Grain Bucket D 574.00$ 3.6 66" Fertilizer & Grain Bucket D 714.00$ 3.7 62" General Purpose Bucket ¨ 476.00$ 3.8 68" General Purpose Bucket ¨ 486.50$ 3.9 74" General Purpose Bucket ¨ 518.00$
3.10 62" Low Profile Bucket ¨ 609.00$ 3.11 68" Low Profile Bucket ¨ 686.00$ 3.12 74" Low Profile Bucket 745.50$ 3.13 68" Snow & Light Material Bucket D 784.00$ 3.14 74" Snow & Light Material Bucket D 829.50$ 3.15 80" Snow & Light Material Bucket D 910.00$ 3.16 88" Snow & Light Material Bucket D (S530, S570, S590 Only) 969.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 N/A
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.16.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 60” Snowblower 3,006.50$ 7.2 SB200 x 66” Snowblower 3,101.00$ 7.3 SB200 x 72” Snowblower 3,202.50$ 7.4 5.5 Hydraulic Motor Package 745.50$ 7.5 6.2 Hydraulic Motor Package 745.50$ 7.6 8.0 Hydraulic Motor Package 787.50$ 7.7 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 60" Sweeper 2,597.00$ 8.2 72" Sweeper 2,894.50$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 Bob-Tach Mounted Backhoe 3,248.00$ 9.2 Hydraulic Clamp 1,092.00$ 9.3 9BH Backhoe 7,910.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 2 ½" Slot Cut Drum 871.50$ 10.5 4" Slot Cut Drum 966.00$ 10.6 6" All Purpose Drum 1,263.50$ 10.7 8" All Purpose Drum 1,263.50$ 10.8 12" All Purpose Drum 1,578.50$ 10.9 14" All Purpose Drum 1,669.50$ 10.10 16" Surface Drum 3,608.50$ 10.11 16" Fast Cut All Purpose Drum 2,075.50$ 10.12 16" Smooth Cut All Purpose Drum 2,618.00$ 10.13 18" Fast Cut All Purpose Drum 2,121.00$ 10.14 18" Smooth Cut All Purpose Drum 2,705.50$ 10.15 24" Fast Cut All Purpose Drum 2,873.50$ 10.16 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 60" Snow Blade (with hydraulic angle) 1,400.00$ 11.2 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.3 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.4 60" Snow V-Blade, 7-Pin 2,726.50$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 HB880 Breaker 4,392.50$ 12.2 Loader Mounting Frame (7113737) 469.00$ 12.3 HB980 Breaker 5,502.00$ 12.4 HOSE KIT 143.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 62" Industrial Bucket Grapple 2,250.50$ 13.4 68" Industrial Bucket Grapple 2,369.50$ 13.5 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.6 66" Root Grapple 2,089.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$ 14.22 Packer Wheel 1,414.00$ 14.23 66" Brushcat Rotary Cutter, Standard Flow (RC66) 4,284.00$ 14.24 66" Brushcat Rotary Cutter, High Flow (RC66HF) 4,340.00$ 14.25 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.26 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$
15.0 Grader:Use this section to offer grader options.
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MODEL 10 AUGER DRIVE UNIT 913.50$ 16.2 MOUNTING FRAME 6812980 259.00$ 16.3 Model 15C Auger Drive Unit 1,106.00$ 16.4 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.5 Model 30C Auger Drive Unit 1,484.00$ 16.6 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.7 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.8 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.9 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 48" Vibratory Roller with Padded Drum 5,908.00$ 18.2 48" Vibratory Roller with Smooth Drum 5,764.50$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 3,177.00$ 10.02 36MONTH/3000HR 5,328.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
16 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT T630
BOBCAT 2.4L T4, NET 70 HP
Y
108.4"
81.3"
8.1"
121"
Tilt 6688 lbs Lift 6200 lbs
24.1"
42°
93.2"
88.1"
64.3"
6371 lbs (ISO 14397-1)
2230 lbs (ISO 14397-1)(SAE J818)
17.6 cu ft. ISO
8742 lbs (ISO 14397-1)
7.1 mph
24.75 gal
Optional
600 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
12.6" Rubber Tracks
Fully Hydrostatic drive. Hydrostatic piston pumps shall be belt driven
from the engine.- Drive belt shall not require any
adjustments.
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 38,399.20
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
16 BASE UNIT PRICE: 38,399.20$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 7,095.90$ 2.2 A71 Option Package 4,221.00$ 2.3 A51 Option Package 3,329.90$ 2.4 A31 Option Package 2,874.20$ 2.5 H51 Option Package 2,297.40$ 2.6 O71 Option Package 1,487.50$ 2.7 O51 Option Package 816.20$ 2.8 Advanced Control System (ACS)* 1,052.80$ 2.9 Selectable Joystick Control (SJC) 1,925.00$
2.10 7 Pin Attachment Control Kit 143.50$ 2.11 High Flow Hydraulics 1,318.10$ 2.12 Hydraulic Bucket Positioning 327.60$ 2.13 Hydraulic Bucket Positioning, Engine Block Heater 396.20$ 2.14 Engine Block Heater 77.70$ 2.15 Air Ride Suspension Seat 219.80$ 2.16 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 68" Constr./Ind. Bucket ¨ 679.00$ 3.2 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.3 74" Constr./Ind. Bucket 735.00$ 3.4 74" Constr./Ind. Heavy Duty Bucket 997.50$ 3.5 80" Constr./Ind. Bucket 801.50$ 3.6 80" Constr./Ind. Heavy Duty Bucket 1,074.50$ 3.7 84" Constr./Ind. Heavy Duty Bucket 1,127.00$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 N/A
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.16.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 66” Snowblower 3,101.00$ 7.2 SB200 x 72” Snowblower 3,202.50$ 7.3 SB200 x 78” Snowblower 3,395.00$ 7.4 SB240 x 72” Snowblower 4,284.00$ 7.5 SB240 x 84” Snowblower 4,375.00$ 7.6 5.5 Hydraulic Motor Package 745.50$ 7.7 6.2 Hydraulic Motor Package 745.50$ 7.8 8.0 Hydraulic Motor Package 787.50$ 7.9 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 72" Sweeper 2,894.50$ 8.2 84" Sweeper 3,290.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 Bob-Tach Mounted Backhoe 3,248.00$ 9.2 Hydraulic Clamp 1,092.00$ 9.3 9BH Backhoe 7,910.00$ 9.4 8811 Backhoe 8,435.00$ 9.5 Mounting Kit (7228276) 250.60$ 9.6 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.7 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.8 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.9 16" Trenching Bucket, Smooth Lip 488.60$
9.10 18" Trenching Bucket, Smooth Lip 539.00$ 9.11 18" Trenching Bucket, 4 Weld-On Teeth 577.50$ 9.12 20" Trenching Bucket, Smooth Lip 546.00$ 9.13 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.14 24" Trenching Bucket, Smooth Lip 584.50$ 9.15 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.16 30" Trenching Bucket, Smooth Lip 620.90$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.17 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.18 36" Trenching Bucket, Smooth Lip 658.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 40" Planer, High Flow 18,032.00$ 10.5 2 ½" Slot Cut Drum 871.50$ 10.6 4" Slot Cut Drum 966.00$ 10.7 6" All Purpose Drum 1,263.50$ 10.8 8" All Purpose Drum 1,263.50$ 10.9 12" All Purpose Drum 1,578.50$ 10.10 14" All Purpose Drum 1,669.50$ 10.11 16" Surface Drum 3,608.50$ 10.12 16" Fast Cut All Purpose Drum 2,075.50$ 10.13 16" Smooth Cut All Purpose Drum 2,618.00$ 10.14 18" Fast Cut All Purpose Drum 2,121.00$ 10.15 18" Smooth Cut All Purpose Drum 2,705.50$ 10.16 24" Fast Cut All Purpose Drum 2,873.50$ 10.17 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.2 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.3 96" Snow Blade (with hydraulic angle) 1,715.00$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$ 11.12 Snow Pusher, 10' 2,383.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 Loader Mounting Frame (7113737) 469.00$ 12.2 HB980 Breaker 5,502.00$ 12.3 HOSE KIT 143.50$ 12.4 HB1180 Breaker 7,234.50$ 12.5 Loader Mounting Frame (7115937) 535.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 68" Industrial Bucket Grapple 2,369.50$ 13.4 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.5 66" Root Grapple 2,089.50$ 13.6 72" Root Grapple 2,303.00$ 13.7 82" Root Grapple 2,523.50$ 13.8 74" Industrial Bucket Grapple 2,509.50$ 13.9 78" Industrial Fork Grapple, with 8 teeth 3,566.50$ 13.10 80" Industrial Bucket Grapple 3,426.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$ 14.22 Packer Wheel 1,414.00$ 14.23 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.24 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$ 14.25 80" Brushcat Rotary Cutter, High Flow (RC80) 4,837.00$
15.0 Grader:Use this section to offer grader options.
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MOUNTING FRAME 6812980 259.00$ 16.2 Model 15C Auger Drive Unit 1,106.00$ 16.3 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.4 Model 30C Auger Drive Unit 1,484.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.6 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.7 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.8 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 73" Vibratory Roller with Padded Drum 6,811.00$ 18.2 73" Vibratory Roller with Smooth Drum 6,629.00$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 3,291.00$ 10.02 36MONTH/3000HR 5,520.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
17 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT T650
BOBCAT 2.4L T4, NET 70 HP
Y
108.4"
81.3"
8.1"
124"
Tilt 5885 lbs Lift 6400 lbs
34.2"
42°
96.3"
87.7"
64.3"
7343 lbs (ISO 14397-1)
2570 lbs (ISO 14397-1)(SAE J818)
17.6 cu ft. ISO
9321 lbs (ISO 14397-1)
6.6 mph
24.75 gal
Optional
950 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
12.6" Rubber Tracks
Fully Hydrostatic drive. Hydrostatic piston pumps shall be belt driven
from the engine.- Drive belt shall not require any
adjustments.
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls (SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 40,992.00
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
17 BASE UNIT PRICE: 40,992.00$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 7,095.90$ 2.2 A71 Option Package 4,221.00$ 2.3 A51 Option Package 3,329.90$ 2.4 A31 Option Package 2,874.20$ 2.5 H51 Option Package 2,297.40$ 2.6 O71 Option Package 1,487.50$ 2.7 O51 Option Package 816.20$ 2.8 Advanced Control System (ACS)* 1,052.80$ 2.9 Selectable Joystick Control (SJC) 1,925.00$
2.10 7 Pin Attachment Control Kit 143.50$ 2.11 High Flow Hydraulics 1,318.10$ 2.12 Hydraulic Bucket Positioning 327.60$ 2.13 Hydraulic Bucket Positioning, Engine Block Heater 396.20$ 2.14 Engine Block Heater 77.70$ 2.15 Air Ride Suspension Seat 219.80$ 2.16 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 68" Constr./Ind. Bucket ¨ 679.00$ 3.2 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.3 74" Constr./Ind. Bucket 735.00$ 3.4 74" Constr./Ind. Heavy Duty Bucket 997.50$ 3.5 80" Constr./Ind. Bucket 801.50$ 3.6 80" Constr./Ind. Heavy Duty Bucket 1,074.50$ 3.7 84" Constr./Ind. Heavy Duty Bucket 1,127.00$ 3.8 68" Low Profile Bucket ¨ (for use with offset rims only) 686.00$ 3.9 74" Low Profile Bucket ¨ 745.50$
3.10 80" Low Profile Bucket ¨ 812.00$ 3.11 68" Snow & Light Material Bucket D 784.00$ 3.12 74" Snow & Light Material Bucket D 801.50$ 3.13 80" Snow & Light Material Bucket D 910.00$ 3.14 88" Snow & Light Material Bucket D 969.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 N/A
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.1 Bob-Tach Standard6.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 66” Snowblower 3,101.00$ 7.2 SB200 x 72” Snowblower 3,202.50$ 7.3 SB200 x 78” Snowblower 3,395.00$ 7.4 SB240 x 72” Snowblower 4,284.00$ 7.5 SB240 x 84” Snowblower 4,375.00$ 7.6 5.5 Hydraulic Motor Package 745.50$ 7.7 6.2 Hydraulic Motor Package 745.50$ 7.8 8.0 Hydraulic Motor Package 787.50$ 7.9 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 72" Sweeper 2,894.50$ 8.2 84" Sweeper 3,290.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 Bob-Tach Mounted Backhoe 3,248.00$ 9.2 Hydraulic Clamp 1,092.00$ 9.3 9BH Backhoe 7,910.00$ 9.4 8811 Backhoe 8,435.00$ 9.5 Mounting Kit (7228276) 250.60$ 9.6 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.7 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.8 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.9 16" Trenching Bucket, Smooth Lip 488.60$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.10 18" Trenching Bucket, Smooth Lip 539.00$ 9.11 18" Trenching Bucket, 4 Weld-On Teeth 577.50$ 9.12 20" Trenching Bucket, Smooth Lip 546.00$ 9.13 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.14 24" Trenching Bucket, Smooth Lip 584.50$ 9.15 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.16 30" Trenching Bucket, Smooth Lip 620.90$ 9.17 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.18 36" Trenching Bucket, Smooth Lip 658.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 40" Planer, High Flow 18,032.00$ 10.5 2 ½" Slot Cut Drum 871.50$ 10.6 4" Slot Cut Drum 966.00$ 10.7 6" All Purpose Drum 1,263.50$ 10.8 8" All Purpose Drum 1,263.50$ 10.9 12" All Purpose Drum 1,578.50$ 10.10 14" All Purpose Drum 1,669.50$ 10.11 16" Surface Drum 3,608.50$ 10.12 16" Fast Cut All Purpose Drum 2,075.50$ 10.13 16" Smooth Cut All Purpose Drum 2,618.00$ 10.14 18" Fast Cut All Purpose Drum 2,121.00$ 10.15 18" Smooth Cut All Purpose Drum 2,705.50$ 10.16 24" Fast Cut All Purpose Drum 2,873.50$ 10.17 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.2 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.3 96" Snow Blade (with hydraulic angle) 1,715.00$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$ 11.12 Snow Pusher, 10' 2,383.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 Loader Mounting Frame (7113737) 469.00$ 12.2 HB980 Breaker 5,502.00$ 12.3 HOSE KIT 143.50$ 12.4 HB1180 Breaker 7,234.50$ 12.5 Loader Mounting Frame (7115937) 535.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 68" Industrial Bucket Grapple 2,369.50$ 13.4 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.5 66" Root Grapple 2,089.50$ 13.6 72" Root Grapple 2,303.00$ 13.7 82" Root Grapple 2,523.50$ 13.8 74" Industrial Bucket Grapple 2,509.50$ 13.9 78" Industrial Fork Grapple, with 8 teeth 3,566.50$ 13.10 80" Industrial Bucket Grapple 3,426.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
14.22 Packer Wheel 1,414.00$ 14.23 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.24 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$ 14.25 80" Brushcat Rotary Cutter, High Flow (RC80) 4,837.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MOUNTING FRAME 6812980 259.00$ 16.2 Model 15C Auger Drive Unit 1,106.00$ 16.3 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.4 Model 30C Auger Drive Unit 1,484.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.6 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.7 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.8 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 73" Vibratory Roller with Padded Drum 6,811.00$ 18.2 73" Vibratory Roller with Smooth Drum 6,629.00$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 3,514.00$ 10.02 36MONTH/3000HR 5,892.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
18 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT T750 T4
Bobcat 3.4L T4 NET 81 HP
Y
114.3"
81.3"
8.6"
132"
Tilt 6346 lbs Lift 5659 lbs
33.6"
42°
104.3"
88.0"
67.2"
9500 lbs (ISO 14397-1)
3325 lbs (ISO 14397-1)(SAE J818)
17.6 cu ft. ISO
10,327 lbs (ISO 14397-1)
7.1 mph
27.2 gal
Optional
950 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
17.7" Rubber Tracks
Fully Hydrostatic drive. Hydrostatic piston pumps shall be belt driven
from the engine.- Drive belt shall not require any
adjustments.
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 50,535.80
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
18 BASE UNIT PRICE: 50,535.80$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments.
2.1 A91 Option Package 7,095.90$ 2.2 A71 Option Package 4,221.00$ 2.3 A51 Option Package 3,329.90$ 2.4 A31 Option Package 2,874.20$ 2.5 H51 Option Package 2,297.40$ 2.6 O71 Option Package 1,487.50$ 2.7 O51 Option Package 816.20$ 2.8 Advanced Control System (ACS)* 1,052.80$ 2.9 Selectable Joystick Control (SJC) 1,925.00$
2.10 7 Pin Attachment Control Kit 143.50$ 2.11 High Flow Hydraulics 1,318.10$ 2.12 Hydraulic Bucket Positioning 327.60$ 2.13 Hydraulic Bucket Positioning, Engine Block Heater 396.20$ 2.14 Engine Block Heater 77.70$ 2.15 Air Ride Suspension Seat 219.80$ 2.16 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 68" Constr./Ind. Bucket ¨ 679.00$ 3.2 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.3 74" Constr./Ind. Bucket 735.00$ 3.4 74" Constr./Ind. Heavy Duty Bucket 997.50$ 3.5 80" Constr./Ind. Bucket 801.50$ 3.6 80" Constr./Ind. Heavy Duty Bucket 1,074.50$ 3.7 84" Constr./Ind. Heavy Duty Bucket 1,127.00$ 3.8 68" Low Profile Bucket ¨ (for use with offset rims only) 686.00$ 3.9 74" Low Profile Bucket ¨ 745.50$
3.10 80" Low Profile Bucket ¨ 812.00$ 3.11 68" Snow & Light Material Bucket D 784.00$ 3.12 74" Snow & Light Material Bucket D 801.50$ 3.13 80" Snow & Light Material Bucket D 910.00$ 3.14 88" Snow & Light Material Bucket D 969.50$ 3.15 100" Snow & Light Material Bucket ¨ 1,263.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 12.00-16.5 (79" loader width) 2,870.00$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.1 Bob-tach Standard6.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 66” Snowblower 3,101.00$ 7.2 SB200 x 72” Snowblower 3,202.50$ 7.3 SB200 x 78” Snowblower 3,395.00$ 7.4 SB240 x 72” Snowblower 4,284.00$ 7.5 SB240 x 84” Snowblower 4,375.00$ 7.6 5.5 Hydraulic Motor Package 745.50$ 7.7 6.2 Hydraulic Motor Package 745.50$ 7.8 8.0 Hydraulic Motor Package 787.50$ 7.9 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 72" Sweeper 2,894.50$ 8.2 84" Sweeper 3,290.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 8811 Backhoe 8,435.00$ 9.2 Mounting Kit (7168488) 252.00$ 9.3 Bob-Tach Adapter Kit (Spacer) 413.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$ 9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$ 9.17 Frost & Rock Ripper 665.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 40" Planer, High Flow 18,032.00$ 10.5 2 ½" Slot Cut Drum 871.50$ 10.6 4" Slot Cut Drum 966.00$ 10.7 6" All Purpose Drum 1,263.50$ 10.8 8" All Purpose Drum 1,263.50$ 10.9 12" All Purpose Drum 1,578.50$ 10.10 14" All Purpose Drum 1,669.50$ 10.11 16" Surface Drum 3,608.50$ 10.12 16" Fast Cut All Purpose Drum 2,075.50$ 10.13 16" Smooth Cut All Purpose Drum 2,618.00$ 10.14 18" Fast Cut All Purpose Drum 2,121.00$ 10.15 18" Smooth Cut All Purpose Drum 2,705.50$ 10.16 24" Fast Cut All Purpose Drum 2,873.50$ 10.17 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.2 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.3 96" Snow Blade (with hydraulic angle) 1,715.00$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$ 11.12 Snow Pusher, 10' 2,383.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 Loader Mounting Frame (7113737) 469.00$ 12.2 HB980 Breaker 5,502.00$ 12.3 HOSE KIT 143.50$ 12.4 HB1180 Breaker 7,234.50$ 12.5 Loader Mounting Frame (7115937) 535.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 68" Industrial Bucket Grapple 2,369.50$ 13.4 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.5 66" Root Grapple 2,089.50$ 13.6 72" Root Grapple 2,303.00$ 13.7 82" Root Grapple 2,523.50$ 13.8 74" Industrial Bucket Grapple 2,509.50$ 13.9 78" Industrial Fork Grapple, with 8 teeth 3,566.50$ 13.10 80" Industrial Bucket Grapple 3,426.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
14.22 Packer Wheel 1,414.00$ 14.23 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.24 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$ 14.25 80" Brushcat Rotary Cutter, High Flow (RC80) 4,837.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MOUNTING FRAME 6812980 259.00$ 16.2 Model 15C Auger Drive Unit 1,106.00$ 16.3 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.4 Model 30C Auger Drive Unit 1,484.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.6 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.7 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.8 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 73" Vibratory Roller with Padded Drum 6,811.00$ 18.2 73" Vibratory Roller with Smooth Drum 6,629.00$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 4,002.00$ 10.02 36MONTH/3000HR 7,803.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
19 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT T770 T4
Bobcat 3.4L T4 NET 81 HP
Y
114.3"
81.3"
8.6"
132"
Tilt 6346 lbs Lift 5659 lbs
33.6"
42°
104.3"
88.0"
67.2"
9929 lbs (ISO 14397-1)
3475 lbs (ISO 14397-1)(SAE J818)
17.6 cu ft. ISO
10327 lbs (SAE J732)
6.6 mph
27.2 gal
Optional
950 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
17.7" Rubber Tracks
Fully Hydrostatic drive. Hydrostatic piston pumps shall be belt driven
from the engine.- Drive belt shall not require any
adjustments.
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 52,808.70
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
19 BASE UNIT PRICE: $ 52,808.70
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 7,095.90$ 2.2 A71 Option Package 4,221.00$ 2.3 A51 Option Package 3,329.90$ 2.4 A31 Option Package 2,874.20$ 2.5 H51 Option Package 2,297.40$ 2.6 O71 Option Package 1,487.50$ 2.7 O51 Option Package 816.20$ 2.8 Advanced Control System (ACS)* 1,052.80$ 2.9 Selectable Joystick Control (SJC) 1,925.00$
2.10 7 Pin Attachment Control Kit 143.50$ 2.11 High Flow Hydraulics 1,318.10$ 2.12 Hydraulic Bucket Positioning 327.60$ 2.13 Hydraulic Bucket Positioning, Engine Block Heater 396.20$ 2.14 Engine Block Heater 77.70$ 2.15 Air Ride Suspension Seat 219.80$ 2.16 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 68" Constr./Ind. Bucket ¨ 679.00$ 3.2 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.3 74" Constr./Ind. Bucket 735.00$ 3.4 74" Constr./Ind. Heavy Duty Bucket 997.50$ 3.5 80" Constr./Ind. Bucket 801.50$ 3.6 80" Constr./Ind. Heavy Duty Bucket 1,074.50$ 3.7 84" Constr./Ind. Heavy Duty Bucket 1,127.00$ 3.8 68" Low Profile Bucket ¨ (for use with offset rims only) 686.00$ 3.9 74" Low Profile Bucket ¨ 745.50$
3.10 80" Low Profile Bucket ¨ 812.00$ 3.11 68" Snow & Light Material Bucket D 784.00$ 3.12 74" Snow & Light Material Bucket D 801.50$ 3.13 80" Snow & Light Material Bucket D 910.00$ 3.14 88" Snow & Light Material Bucket D 969.50$ 3.15 100" Snow & Light Material Bucket ¨ 1,263.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 N/A
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.1 Bob-tach Standard6.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 66” Snowblower 3,101.00$ 7.2 SB200 x 72” Snowblower 3,202.50$ 7.3 SB200 x 78” Snowblower 3,395.00$ 7.4 SB240 x 72” Snowblower 4,284.00$ 7.5 SB240 x 84” Snowblower 4,375.00$ 7.6 5.5 Hydraulic Motor Package 745.50$ 7.7 6.2 Hydraulic Motor Package 745.50$ 7.8 8.0 Hydraulic Motor Package 787.50$ 7.9 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 72" Sweeper 2,894.50$ 8.2 84" Sweeper 3,290.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 8811 Backhoe 8,435.00$ 9.2 Mounting Kit (7168488) 252.00$ 9.3 Bob-Tach Adapter Kit (Spacer) 413.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$ 9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$ 9.17 Frost & Rock Ripper 665.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 40" Planer, High Flow 18,032.00$ 10.5 2 ½" Slot Cut Drum 871.50$ 10.6 4" Slot Cut Drum 966.00$ 10.7 6" All Purpose Drum 1,263.50$ 10.8 8" All Purpose Drum 1,263.50$ 10.9 12" All Purpose Drum 1,578.50$ 10.10 14" All Purpose Drum 1,669.50$ 10.11 16" Surface Drum 3,608.50$ 10.12 16" Fast Cut All Purpose Drum 2,075.50$ 10.13 16" Smooth Cut All Purpose Drum 2,618.00$ 10.14 18" Fast Cut All Purpose Drum 2,121.00$ 10.15 18" Smooth Cut All Purpose Drum 2,705.50$ 10.16 24" Fast Cut All Purpose Drum 2,873.50$ 10.17 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.2 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.3 96" Snow Blade (with hydraulic angle) 1,715.00$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$ 11.12 Snow Pusher, 10' 2,383.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 Loader Mounting Frame (7113737) 469.00$ 12.2 HB980 Breaker 5,502.00$ 12.3 HOSE KIT 143.50$ 12.4 HB1180 Breaker 7,234.50$ 12.5 Loader Mounting Frame (7115937) 535.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 68" Industrial Bucket Grapple 2,369.50$ 13.4 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.5 66" Root Grapple 2,089.50$ 13.6 72" Root Grapple 2,303.00$ 13.7 82" Root Grapple 2,523.50$ 13.8 74" Industrial Bucket Grapple 2,509.50$ 13.9 78" Industrial Fork Grapple, with 8 teeth 3,566.50$ 13.10 80" Industrial Bucket Grapple 3,426.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
14.22 Packer Wheel 1,414.00$ 14.23 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.24 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$ 14.25 80" Brushcat Rotary Cutter, High Flow (RC80) 4,837.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MOUNTING FRAME 6812980 259.00$ 16.2 Model 15C Auger Drive Unit 1,106.00$ 16.3 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.4 Model 30C Auger Drive Unit 1,484.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.6 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.7 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.8 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 73" Vibratory Roller with Padded Drum 6,811.00$ 18.2 73" Vibratory Roller with Smooth Drum 6,629.00$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 2,562.00$ 10.02 36MONTH/3000HR 4,996.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
20 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT T870 T4
Bobcat 3.4L T4 NET 88 HP
Y
119.3"
83.4"
8.6"
144"
Tilt 7890 lbs Lift 7158 lbs
36.5"
42°
112.3"
99"
69.6"
10,072 lbs (ISO 14397-1)
3525 lbs (ISO 14397-1)
19.1 cu ft. ISO
10,008 lbs
7.2 mph
32.8 gal
Optional
950 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
17.7" Rubber Track
Fully Hydrostatic drive. Hydrostatic piston pumps shall be belt driven
from the engine.- Drive belt shall not require any
adjustments.
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Direction and speed controlled by two hand operated steering levers
or optional joystick(s)
Controlled by separate foot pedals or optional Advanced Control
System (ACS) or optional Selectable Joystick Controls
(SJC).
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 57,101.10
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
20 BASE UNIT PRICE: 57,101.10$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 7,095.90$ 2.2 A71 Option Package 4,444.30$ 2.3 A51 Option Package 3,553.20$ 2.4 A31 Option Package 3,097.50$ 2.6 O71 Option Package 1,710.10$ 2.7 O51 Option Package 1,038.80$ 2.9 Selectable Joystick Control (SJC) 906.50$
2.10 7 Pin Attachment Control Kit 143.50$ 2.11 High Flow Hydraulics 1,318.10$ 2.12 Hydraulic Bucket Positioning 327.60$ 2.13 Hydraulic Bucket Positioning, Engine Block Heater 396.20$ 2.14 Engine Block Heater 77.70$ 2.15 Air Ride Suspension Seat 219.80$ 2.16 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.2 80" Constr./Ind. Heavy Duty Bucket 1,288.00$ 3.3 84" Constr./Ind. Heavy Duty Bucket 1,382.50$ 3.4 88" Constr./Ind. Heavy Duty Bucket ¨ 910.00$ 3.5 82" Constr./Ind. Severe Duty Bucket ¨ 969.50$ 3.6 88" Constr./Ind. Severe Duty Bucket 1,263.50$ 3.7 80" Snow & Light Material Bucket D 1,300.00$ 3.8 88" Snow & Light Material Bucket D 1,385.00$ 3.9 100" Snow & Light Material Bucket ¨ 1,805.00$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 N/A
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.1 Bobtach Standard6.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 66” Snowblower 3,101.00$ 7.2 SB200 x 72” Snowblower 3,202.50$ 7.3 SB200 x 78” Snowblower 3,395.00$ 7.4 SB240 x 72” Snowblower 4,284.00$ 7.5 SB240 x 84” Snowblower 4,375.00$ 7.6 5.5 Hydraulic Motor Package 745.50$ 7.7 6.2 Hydraulic Motor Package 745.50$ 7.8 8.0 Hydraulic Motor Package 787.50$ 7.9 9.6 Hydraulic Motor Package 833.00$
7.10 SBX240 x 72” (blower includes hyd motor pkg) 37 GPM high flow only 5,481.00$ 7.11 SBX240 x 84” (blower includes hyd motor pkg) 37 GPM high flow only 5,582.50$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 72" Sweeper 2,894.50$ 8.2 84" Sweeper 3,290.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 8811 Backhoe 8,435.00$ 9.2 Mounting Kit (7168488) 252.00$ 9.3 Bob-Tach Adapter Kit (Spacer) 413.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$ 9.14 30" Trenching Bucket, Smooth Lip 620.90$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$ 9.17 Frost & Rock Ripper 665.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 40" Planer, High Flow 18,032.00$ 10.5 2 ½" Slot Cut Drum 871.50$ 10.6 4" Slot Cut Drum 966.00$ 10.7 6" All Purpose Drum 1,263.50$ 10.8 8" All Purpose Drum 1,263.50$ 10.9 12" All Purpose Drum 1,578.50$ 10.10 14" All Purpose Drum 1,669.50$ 10.11 16" Surface Drum 3,608.50$ 10.12 16" Fast Cut All Purpose Drum 2,075.50$ 10.13 16" Smooth Cut All Purpose Drum 2,618.00$ 10.14 18" Fast Cut All Purpose Drum 2,121.00$ 10.15 18" Smooth Cut All Purpose Drum 2,705.50$ 10.16 24" Fast Cut All Purpose Drum 2,873.50$ 10.17 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.2 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.3 96" Snow Blade (with hydraulic angle) 1,715.00$ 11.4 108" Snow Blade – Heavy Duty (with hydraulic angle) 2,917.60$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$ 11.12 Snow Pusher, 10' 2,383.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 Loader Mounting Frame (7113737) 469.00$ 12.2 HB980 Breaker 5,502.00$ 12.3 HOSE KIT 143.50$ 12.4 HB1180 Breaker 7,234.50$ 12.5 Loader Mounting Frame (7115937) 535.50$
13.0 Grapple:Use this section to offer grapple options.
13.7 82" Root Grapple 2,523.50$ 13.9 78" Industrial Fork Grapple, with 8 teeth 3,566.50$ 13.10 80" Industrial Bucket Grapple 3,426.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 90" Mower 3,748.50$ 14.2 84" Soil Conditioner, Hydraulic Angle and depth 6,433.00$ 14.3 84" Soil Conditioner, High Flow Hydraulic Angle and Depth 6,713.00$ 14.4 SP5 Spreader 1,452.50$ 14.5 HS8 Spreader 2,348.50$ 14.6 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.7 Adjustable Deflector 84.00$ 14.8 Gate Assembly Kit 129.50$ 14.9 Vibrator Kit 301.00$ 14.14 Sod Layer 2,604.00$ 14.15 SG60 Stump Grinder 6,013.00$ 14.16 SGX60 Stump Grinder 6,223.00$ 14.17 Packer Wheel 1,414.00$ 14.20 80" Brushcat Rotary Cutter, High Flow (RC80) 4,837.00$
15.0 Grader:Use this section to offer grader options.
15.1 Grader,96" 9,044.00$ 15.2 Grader, 108" 9,352.00$ 15.3 Laser Mounting Kit 640.50$ 15.4 Sonic Tracer and Slope Sensor Mounting Kit 1,186.50$ 15.5 Sonic Tracer and Slope Sensor Package 6,331.50$ 15.6 End Wing Kit 297.50$
16.0 Auger:Use this section to offer auger options.
16.1 MOUNTING FRAME 6812980 259.00$ 16.2 Model 15C Auger Drive Unit 1,106.00$ 16.3 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.4 Model 30C Auger Drive Unit 1,484.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.6 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.7 Model 50PH Planetary Auger Drive Unit 2,635.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
16.8 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 73" Vibratory Roller with Padded Drum 6,811.00$ 18.2 73" Vibratory Roller with Smooth Drum 6,629.00$
19.0 Other:Use this section to offer any other option not already covered.
19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 4,564.00$ 10.02 36MONTH/3000HR 8,901.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
Price quote for: SKID STEERS
Vendor Name: CLARK EQUIPMENT COMPANY dba BO Contact Person: RANDY FUSSStreet Address: 250 EAST BEATON DRIVEP.O. Box: PO BOX 6000City, State, Zip WEST FARGO, ND 58078Phone #: 701-241-8746Toll Free #: 1-800-965-4232 OPT. #2Fax #: 701-280-7860Email Address: [email protected]
Spec # Information Requested
21 MAKE AND MODEL
Engine Type and SAE net HP
Tier 4 Compliant? (Y/N)
Length w/o attachments
Height with operator cab
Ground clearance
Maximum height to bucket hinge pin
Breakout force
Reach at maximum height
Dump angle at maximum height
Dump height with standard bucket
Front clearance circle with standard bucket
Rear clearance circle
Tipping load - SAE rated
Rated operating capacity - SAE
Standard bucket capacity - SAE heaped rating
Operating weight - SAE rated
Travel speed
Fuel tank capacity
Cold weather starting assist
Battery CCA
Alternator size - amps
Transmission type
Tire / Track size / width
Final drive chains and drive method
Final drive chain adjustment / maintenance
Gauges / instrumentation
Pump type - GPM and PSI
Control valves
Hydraulic oil cooler
Drive controls
Lift and tilt controls
Engine speed control
Work lights - front
Work lights - rear
Warranty
BASE UNIT PRICE:
OBCAT COMPANY
Answer
BOBCAT A770 T4`
Bobcat 3.4L T4 NET 88 HP
Y
114.3"
81.3"
8.1"
132"
Tilt 5140 lbs Lift 5365 lbs
31.5"
42°
104.3"
85.8"
69.7"
6650 lbs (ISO 14397-1)
3325 lbs (ISO 14397-1)
17.6 cu ft. ISO
9460 lbs (SAE J732)
7.1 mph
27.2 gal
Optional
950 CCA
90 amps
Infinitely Variable Tandem Hydrostatic piston pumps, driving
two fully reversing hydrostatic motors.
12-16.5 12 PLY Rated Heavy Duty
Prestressed #120 HSOC endless roller chain (no master link) and
sprockets in sealed chaincase with oil lubrication (Chains do not
require periodic adjustments) Two chains per side with no idler
sprocket
No required periodic adjustments
Engine Coolant Temperature and Fuel Level
Warning lights:Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction, Hydraulic System Malfunction, Diesel Particulate
Filter (DPF) / Diesel Exhaust Fluid (DEF), and General Warning
Indicators:BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:Operating Hours, Engine rpm, Speed Management Setting,
Maintenance Clock Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift and Tilt Compensation Setting,
Steering Drift Compensation Setting, and Drive Response
SettingOther:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation
Engine Driven, Gear type, 17.1 gpm, 3550 psi
3-Spool, open center, manually operated with spring detent for lift
float; Electrically controlled auxiliary spool.
Standard
Loader direction, steering, and travel speed shall be controlled by
left hand joystick.
Loader lift and tilt functions controlled by right hand joystick.
Hand operated speed control, additional foot operated speed
control pedal with SJC option; key-type start switch or optional
Keyless Start Panel or optional Deluxe Instrumentation Panel and
function error shutdown
Standard
Standard
1 yr.
$ 46,620.70
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
SKID STEERS - OEM OPTIONS AND ATTACHMENTS
Spec # Description Price
21 BASE UNIT PRICE: 46,620.70$
2.0 Skid Steer Options:Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. *
2.1 A91 Option Package 5,925.00$ 2.2 A71 Option Package 4,221.00$ 2.3 A51 Option Package 3,329.00$ 2.4 O71 Option Package 1,487.50$ 2.5 7 Pin Attachment Control Kit 143.50$ 2.6 High Flow Hydraulics 1,318.10$ 2.7 Hydraulic Bucket Positioning 327.60$ 2.8 Hydraulic Bucket Positioning, Engine Block Heater 396.20$ 2.9 Engine Block Heater 77.70$
2.10 Air Ride Suspension Seat 219.80$ 2.11 Radio 291.90$
3.0 Bucket Options:Use this section to offer bucket options such as standard, snow or combination buckets, etc..
3.1 68" Constr./Ind. Bucket ¨ 679.00$ 3.2 68" Constr./Ind. Heavy Duty Bucket 962.50$ 3.3 74" Constr./Ind. Bucket 735.00$ 3.4 74" Constr./Ind. Heavy Duty Bucket 997.50$ 3.5 80" Constr./Ind. Bucket 801.50$ 3.6 80" Constr./Ind. Heavy Duty Bucket 1,074.50$ 3.7 84" Constr./Ind. Heavy Duty Bucket 1,127.00$ 3.8 68" Low Profile Bucket ¨ (for use with offset rims only) 686.00$ 3.9 74" Low Profile Bucket ¨ 745.50$
3.10 80" Low Profile Bucket ¨ 812.00$ 3.11 68" Snow & Light Material Bucket D 784.00$ 3.12 74" Snow & Light Material Bucket D 801.50$ 3.13 80" Snow & Light Material Bucket D 910.00$ 3.14 88" Snow & Light Material Bucket D 969.50$ 3.15 100" Snow & Light Material Bucket ¨ 1,263.50$
4.0 Overtire tracks:Use this section to offer overtire tracks.
4.1 12.00-16.5 (79" loader width) 2,870.00$
5.0 Pallet forks:Use this section to offer fork options, such as pallet forks, bale handler, etc..
5.1 Pallet Fork Frame, less Teeth 297.50$ 5.2 42" Pallet Fork Teeth, Set of 2 252.00$ 5.3 48" Pallet Fork Teeth, Set of 2 266.00$ 5.4 Bale Forks, Set of 2 427.00$ 5.5 42" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 42" teeth) 1,960.00$ 5.6 48" Hydraulic Pallet Fork(Includes back frame and 2 hydraulically adjustable 48" teeth) 2,030.00$
6.0 Adaptor plate:Use this section to offer adaptor plate options.
6.1 Bob-Tach Standard6.2
7.0 Snowblower:Use this section to offer snowblower options.
7.1 SB200 x 66” Snowblower 3,101.00$ 7.2 SB200 x 72” Snowblower 3,202.50$ 7.3 SB200 x 78” Snowblower 3,395.00$ 7.4 SB240 x 72” Snowblower 4,284.00$ 7.5 SB240 x 84” Snowblower 4,375.00$ 7.6 5.5 Hydraulic Motor Package 745.50$ 7.7 6.2 Hydraulic Motor Package 745.50$ 7.8 8.0 Hydraulic Motor Package 787.50$ 7.9 9.6 Hydraulic Motor Package 833.00$
8.0 Sweeper:Use this section to offer sweeper options.
8.1 72" Sweeper 2,894.50$ 8.2 84" Sweeper 3,290.00$
9.0 Backhoe:Use this section to offer backhoe options.
9.1 8811 Backhoe 8,435.00$ 9.2 Mounting Kit (7168488) 252.00$ 9.3 Bob-Tach Adapter Kit (Spacer) 413.00$ 9.4 12" Trenching Std Duty Bucket, Smooth Lip 441.00$ 9.5 12" Trenching Std Duty Bucket, Weld-on Teeth 479.50$ 9.6 16" Trenching Bucket, 4 Weld-On Teeth 532.00$ 9.7 16" Trenching Bucket, Smooth Lip 488.60$ 9.8 18" Trenching Bucket, Smooth Lip 539.00$ 9.9 18" Trenching Bucket, 4 Weld-On Teeth 577.50$
9.10 20" Trenching Bucket, Smooth Lip 546.00$ 9.11 20" Trenching Bucket, 4 Weld-On Teeth 584.50$ 9.12 24" Trenching Bucket, Smooth Lip 584.50$ 9.13 24" Trenching Bucket, 4 Weld-On Teeth 619.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
9.14 30" Trenching Bucket, Smooth Lip 620.90$ 9.15 30" Trenching Bucket, 5 Weld-On Teeth 700.00$ 9.16 36" Trenching Bucket, Smooth Lip 658.00$ 9.17 Frost & Rock Ripper 665.00$
10.0 Planer:Use this section to offer planer options.
10.1 14" Planer, Standard Flow 6,044.50$ 10.2 18" Planer, High Flow 8,939.00$ 10.3 24" Planer, High Flow 10,825.50$ 10.4 40" Planer, High Flow 18,032.00$ 10.5 2 ½" Slot Cut Drum 871.50$ 10.6 4" Slot Cut Drum 966.00$ 10.7 6" All Purpose Drum 1,263.50$ 10.8 8" All Purpose Drum 1,263.50$ 10.9 12" All Purpose Drum 1,578.50$ 10.10 14" All Purpose Drum 1,669.50$ 10.11 16" Surface Drum 3,608.50$ 10.12 16" Fast Cut All Purpose Drum 2,075.50$ 10.13 16" Smooth Cut All Purpose Drum 2,618.00$ 10.14 18" Fast Cut All Purpose Drum 2,121.00$ 10.15 18" Smooth Cut All Purpose Drum 2,705.50$ 10.16 24" Fast Cut All Purpose Drum 2,873.50$ 10.17 24" Smooth Cut All Purpose Drum 3,608.50$
11.0 Snow Plow:Use this section to offer snow plow options.
11.1 72" Snow Blade (with hydraulic angle) 1,512.00$ 11.2 84" Snow Blade (with hydraulic angle) 1,648.50$ 11.3 96" Snow Blade (with hydraulic angle) 1,715.00$ 11.5 72" Snow V-Blade 2,912.00$ 11.6 84" Snow V-Blade 2,978.50$ 11.7 96" Snow V-Blade 3,045.00$ 11.8 Blade Flotation Option (Approved for use with 72", 84", 96" and 108" Snow V-Blades) 584.50$ 11.9 86" Snow Blade – Heavy Duty (with hydraulic angle) 2,600.50$ 11.10 96" Snow Blade – Heavy Duty (with hydraulic angle) 2,666.30$ 11.11 Snow Pusher, 8' 2,166.50$ 11.12 Snow Pusher, 10' 2,383.50$
12.0 Hydraulic breaker:Use this section to offer hydraulic breaker options.
12.1 Loader Mounting Frame (7113737) 469.00$ 12.2 HB980 Breaker 5,502.00$ 12.3 HOSE KIT 143.50$ 12.4 HB1180 Breaker 7,234.50$ 12.5 Loader Mounting Frame (7115937) 535.50$
13.0 Grapple:Use this section to offer grapple options.
13.1 Grapple, 55" Utility – C/I 1,032.50$ 13.2 Grapple, 55” Utility - GP 1,032.50$ 13.3 68" Industrial Bucket Grapple 2,369.50$ 13.4 66" Industrial Fork Grapple, with 7 teeth 2,772.00$ 13.5 66" Root Grapple 2,089.50$ 13.6 72" Root Grapple 2,303.00$ 13.7 82" Root Grapple 2,523.50$ 13.8 74" Industrial Bucket Grapple 2,509.50$ 13.9 78" Industrial Fork Grapple, with 8 teeth 3,566.50$ 13.10 80" Industrial Bucket Grapple 3,426.50$
14.0 Landscape:Use this section to offer landscape options.
14.1 5B Landscape Rake 5,141.50$ 14.2 6B Landscape Rake 5,344.50$ 14.3 72" Mower 3,426.50$ 14.4 90" Mower 3,748.50$ 14.5 60" Soil Conditioner, Manual Angle 3,426.50$ 14.6 60" Soil Conditioner, Hydraulic Angle and Depth 3,426.50$ 14.7 72" Soil Conditioner, Manual Angle 5,600.00$ 14.8 72" Soil Conditioner, Hydraulic Angle and Depth 6,223.00$ 14.9 SP5 Spreader 1,452.50$ 14.10 HS8 Spreader 2,348.50$ 14.11 Loader Mounting Kit (SP5 SPREADER) 430.50$ 14.12 Adjustable Deflector 84.00$ 14.13 Gate Assembly Kit 129.50$ 14.14 Vibrator Kit 301.00$ 14.15 72" Deluxe Landplane Leveling Attachment 1,400.00$ 14.16 72" Basic Landplane Leveling Attachment 931.00$ 14.17 78" Deluxe Landplane Leveling Attachment 1,491.00$ 14.18 78" Basic Landplane Leveling Attachment 1,011.50$ 14.19 Sod Layer 2,604.00$ 14.20 SG60 Stump Grinder 6,013.00$ 14.21 SGX60 Stump Grinder 6,223.00$ 14.22 Packer Wheel 1,414.00$ 14.23 72" Brushcat Rotary Cutter, Standard Flow (RC72) 4,406.50$ 14.24 72" Brushcat Rotary Cutter, High Flow (RC72HF) 4,578.00$ 14.25 80" Brushcat Rotary Cutter, High Flow (RC80) 4,837.00$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
15.0 Grader:Use this section to offer grader options.
15.1 Grader, 84" 5,673.50$ 15.2 Laser Mounting Kit, BLR2 (must also order 2 receivers) 612.50$ 15.3 Laser Receiver, BLR2 1,358.00$
16.0 Auger:Use this section to offer auger options.
16.1 MOUNTING FRAME 6812980 259.00$ 16.2 Model 15C Auger Drive Unit 1,106.00$ 16.3 Model 15H Hex Shaft Auger Drive Unit 1,106.00$ 16.4 Model 30C Auger Drive Unit 1,484.00$ 16.5 Model 30H Hex Shaft Auger Drive Unit 1,484.00$ 16.6 Model 35PH Planetary Auger Drive Unit 2,254.00$ 16.7 Model 50PH Planetary Auger Drive Unit 2,635.50$ 16.8 35PH/50PH Mounting Frame 325.50$
SEQ # 727-012015Tractors: Skid Steers AttachmentsT-631(5)
STATE OF MINNESOTAPRICING PAGE - METHOD # 1SKID STEERS AND ATTACHMENTS
JANUARY 2015
Spec # Description Price
17.0 Wheel saw:Use this section to offer wheel saw options.
17.1 WS18 Wheel Saw 10,706.50$ 17.2 3" Wheel 2,320.50$ 17.3 6" Wheel 2,320.50$ 17.4 6" Trench Cleaner 864.50$ 17.5 8" Wheel 2,800.00$ 17.6 8" Trench Cleaner 948.50$
18.0 Vibratory roller:Use this section to offer vibratory roller options.
18.1 73" Vibratory Roller with Padded Drum 6,811.00$ 18.2 73" Vibratory Roller with Smooth Drum 6,629.00$
19.0 Other:Use this section to offer any other option not already covered.
19.1 68" Angle Broom 3,720.50$ 19.2 84" Angle Broom 4,256.00$
20.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0%AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
21.0 INSTALLATION: Hourly Labor Rate For Attachment Installations, Etc. (See Special Terms and Conditions) Price: 95.00$
22.0 OEM EXTENDED WARRANTY OPTIONS10.01 24MONTH/2000HR FULL COVERAGE 2,562.00$ 10.02 36MONTH/3000HR 4,996.00$
23.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/ASummer Weekly Rental Rate: N/A
Summer Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
Winter Rental Rate - October 1 through March 31 Winter Hourly Rental Rate: N/A
Winter Weekly Rental Rate: N/AWinter Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,
state the actual interest rate here: N/A
24.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
25.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT: City/St/Zip GWINNER, ND
PRICE PER LOADED MILE 0.00 FOB DESTINATION
MINIMUM DELIVERY CHARGE (if any) 0.00 FOB DESTINATION
DEDUCT FOR CUSTOMER PICK UP OF EQUIPMENT: 0.00 FOB DESTINATION
RESPONDER'S NAME: CLARK EQUIPMENT COMPANY dba BOBCAT COMPANY
TITLE & NUMBER: SKID STEER AND OEM ATTACHMENTS T-631(5)
** Following is a list of all distributors that are authorized to sell the equipment listed above.
** The Swift Vendor Number (SWIFT UD) must be complete, including the vendor Swift ID and Location Code (LOC CODE).
** All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract may be executed.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMEFarm-Rite Equipment of St. Cloud, St. Cloud, MN
0000228536 002810 MAYHEW LAKE RD NE ST.CLOUD MN
MN 56304 320-240-2085 DAVID COX
Aldrich Tractor, Inc., Verndale, MN 0000220002 001 19828 US HIGHWAY 10 VERNDALE
MN 56481 218-445-5430 TIM CURRENT
Bobcat of Otter Tail County,Fergus Falls,MN
0002256287 0013327 EAST FIR AVENUE FERGUS FALLS
MN 56537 (218) 739-4505 ROGER PATTERSON
Bobcat of Duluth Inc,Duluth,MN 0000236269 0024610 WEST ARROWHEAD ROAD DULUTH
MN 55811 (218) 727-7377 DAN LINDE
Bobcat of Morris, Inc.,Morris,MN19700 470TH AVENUE MORRIS
MN 56267 (320) 589-4439 SHAWN KIRWIN
Daves Repair, Hills, MN 640 51ST STREET HILLS MN 507-962-3631 RANDY WHITECrawford's Equipment, Inc.,Cambridge,MN
4898 HWY 95 NW CAMBRIDGE
MN 55008 (763) 689-1794 BRIAN CRAWFORD
Bobcat of the Coulee Region, Inc.,Dresbach,MN 31465 VETERANS RD DRESBACH
MN 55947 (507) 643-6781 ANDY KASTEN
Swede's Service Center,Minneota,MN 110 WEST 1ST STREET MINNEOTA
MN 56264 (507) 872-6206 DENNIS SWEDZINSKI
United Farmers Cooperative,Lafayette,MN 840 PIONEER AVENUE LAFAYETTE
MN 56054 (507) 228-8224 TIM SCHNEIDER
Farm-Rite Equipment, Inc, Dassel,MN 0000228536 001
901 PARKER AVE DASSEL
MN 55325 (320) 275-2737 DAVID COX
Farm-Rite Equipment of Willmar, Inc., Willmar, MN
1515 WEST LITCHFIELD AVENUE WILLMAR
MN 56201 320-235-3672 DAVID COX
GDF Enterprises Inc,Windom,MN 0000259927 0011815 1ST AVE N WINDOM
MN 56101 (507) 831-5342 GREG PFEFFER
Titan Machinery, Inc., Redwood Falls,MN 0000251892 016
1820 E BRIDGE STREET REDWOOD FALLS
MN 56283 (507) 644-4400 ALAN WINTER
Jaycox Implement, Inc,Worthington,MN
3021 133RD STREET WEST WORTHINGTON
MN 55379 (507) 376-3147 JUSTIN LANO
Lano Equipment of Norwood,Norwood Young America,MN 0000213525 001
1015 HWY 212 WEST NORWOOD YOUNG AMERICA
MN 55368 (952) 467-2181 JACK LANO
Lano Equipment, Inc., Corcoran,MN 0000193199 003 23580 HIGHWAY 55 CORCORAN
MN 55357 (763) 479-8200 BILL LANO
Lano Equipment, Inc,Shakopee,MN 0000193199 001
3021 133RD STREET WEST SHAKOPEE
MN 55379 (952) 445-6310 EVAN LANO
Lano Equipment, Inc,Ramsey,MN 0000193199 002 61 40 HIGHWAY 10 NW RAMSEYMN
55303 (763) 323-1720 ROD LANOLong Prairie Machinery Inc,Long Prairie,MN
19612 US 71 LONG PRAIRIE
MN 56347 (320) 732-3715 GARY SCHNEEKLOTH
Lund Implement Company,Madison,MN 2488 HIGHWAY 75 NORTH MADISON
MN 56256 (320) 598-3150 CHRIS LUND
Matejcek Implement Company,Faribault,MN 0000194592 001 3040 HIGHWAY 60 WEST FARIBAULT
MN 55021 (507) 334-2233 HERB ENGLER
Alex Power Equipment,Alexandria,MN
111 50TH AVENUE WEST ALEXANDRIA
MN 56308 (320) 763-4994 CRAIG NEUBARTH
Bobcat of Bemidji,Bemidji,MN 0000251301 001 3516 IRVINE AVENUE NW BEMIDJIMN
56601 (218) 751-4660 DUANE REESETimmer Implement, Inc., Aitkin, MN 1001 2ND STREET NW AITKIN
MN 56431 218-927-2515 GREG RUIS
Miller Sellner Slayton, LLC 1535 20TH STREET SLAYTONMN
56172 (507) 836-8571 TROY WINTERSwanson's Repair, Inc,Detroit Lakes,MN 0000212524 001
1220 RANDOLPH ROAD DETROIT LAKES
MN 56501 (218) 847-2157 RYAN SWANSON
Tri-State Bobcat, Inc,Little Canada,MN 0000206308 002
3101 SPRUCE STREET LITTLE CANADA
MN 55117 (651) 407-3727 KEVIN USHER
Tri-State Bobcat, Inc, Hudson, WI 0000206308 003745 EXCHANGE DR HUDSON WI (715) 531-0801 PATRICK SHOEN
Thermo King Sales & Service, Inc.,Albert Lea,MN
2317 CONSUL STREET ALBERT LEA
MN 56007 (507) 377-1631 DON ANDERSON
Bobcat of Mankato, Mankato, MN 2333 7TH AVENUE MANKATO
MN 56001 507-625-4511 GRAHAM JOHNSON
Tri-State Bobcat Inc,Burnsville,MN 0000206308 001 1200 HWY 13 E BURNSVILLE
MN 55337 (952) 894-0894 PERRY HARRISON
Bobcat of Rochester, Stewartville, MN 0000273933 001 103 20TH STREET NE STEWARTVILLE
MN 55976 507-285-0753 CRAIG BLOOD
Yeager Implement Inc,Blue Earth,MN 0000299372 001
1010 GIANT DRIVE BLUE EARTH
MN 56013 (507) 526-5918 BILL FARNHAM
24/2000 Full 24/2000 DL 36/2000 Full 36/2000 DL 36/3000 Full 36/3000 DL 36/3000 ACS-SJC-SCPA 60/5000 DL
Model
Full Coverage Driveline
Coverage Full Coverage
Driveline
Coverage Full Coverage
Driveline
Coverage ACS / SJC Coverage
Driveline
Coverage
(Municipalities
Only) SSL 9974357 9974350 9974405 9974414 9974370 9974363 9978057 9974376
S70 894$ 447$ 1,319$ 659$ 1,744$ 872$ -$ 1,657$
S100 1,027$ 514$ 1,515$ 758$ 2,003$ 1,002$ 885$ 1,903$
S130 1,093$ 546$ 1,612$ 806$ 2,131$ 1,065$ 929$ 2,024$
S150 1,052$ 554$ 1,552$ 817$ 2,052$ 1,080$ 941$ 2,052$
S160 1,155$ 608$ 1,703$ 896$ 2,252$ 1,185$ 1,033$ 2,252$
S175 1,104$ 581$ 1,628$ 857$ 2,152$ 1,133$ 988$ 2,152$
S185 1,234$ 649$ 1,820$ 958$ 2,406$ 1,266$ 1,104$ 2,406$
S205 1,340$ 670$ 1,977$ 988$ 2,613$ 1,307$ 1,139$ 2,483$
S450 T4 1,257$ 662$ 1,274$ 589$ 2,065$ 903$ 1,125$ 2,065$
S510 iT4 1,089$ 573$ 1,607$ 846$ 2,124$ 1,118$ 975$ 2,124$
S510 T4 1,288$ 678$ 1,304$ 603$ 2,114$ 925$ 1,152$ 2,114$
S530 iT4 1,148$ 604$ 1,694$ 891$ 2,239$ 1,179$ 1,027$ 2,239$
S530 T4 1,347$ 709$ 1,364$ 631$ 2,211$ 967$ 1,205$ 2,211$
S550 iT4 1,196$ 629$ 1,763$ 928$ 2,331$ 1,227$ 1,070$ 2,331$
S550 T4 1,411$ 742$ 1,429$ 661$ 2,316$ 1,013$ 1,262$ 2,316$
S570 iT4 1,274$ 671$ 1,879$ 989$ 2,485$ 1,308$ 1,140$ 2,485$
S570 T4 1,489$ 784$ 1,509$ 698$ 2,446$ 1,070$ 1,333$ 2,446$
S590 iT4 1,325$ 697$ 1,954$ 1,028$ 2,583$ 1,359$ 1,185$ 2,583$
S590 T4 1,540$ 810$ 1,560$ 721$ 2,528$ 1,106$ 1,378$ 2,528$
S630 1,874$ 825$ 2,765$ 1,217$ 3,655$ 1,608$ 1,421$ 3,056$
S630 T4 2,154$ 948$ 2,345$ 843$ 3,646$ 1,294$ 1,633$ 3,511$
S650 1,994$ 877$ 2,941$ 1,294$ 3,888$ 1,711$ 1,511$ 3,250$
S650 T4 2,273$ 1,000$ 2,475$ 890$ 3,847$ 1,365$ 1,723$ 3,705$
S650 1M T4 2,634$ 1,159$ 2,868$ 1,032$ 4,458$ 1,582$ 1,997$ 4,294$
S750 2,272$ 1,000$ 3,351$ 1,475$ 4,430$ 1,949$ 1,722$ 3,704$
S750 iT4 2,561$ 1,127$ 3,777$ 1,662$ 4,993$ 2,197$ 1,941$ 4,175$
S770 2,562$ 1,127$ 3,779$ 1,663$ 4,996$ 2,198$ 1,942$ 4,176$
S770 iT4 2,642$ 1,162$ 3,897$ 1,715$ 5,152$ 2,267$ 2,003$ 4,307$
S850 2,837$ 1,248$ 4,184$ 1,841$ 5,531$ 2,434$ 2,150$ 4,624$
S850 iT4 3,077$ 1,354$ 4,538$ 1,997$ 6,000$ 2,640$ 2,332$ 5,016$
CTL 9974358 9974351 9974406 9974415 9974371 9974364 9978060 9974377
T110 2,064$ 963$ 3,044$ 1,421$ 4,024$ 1,878$ 1,706$ 3,568$
T140 2,188$ 1,021$ 3,228$ 1,506$ 4,267$ 1,991$ 1,809$ 3,784$
T450 T4 2,708$ 1,264$ 2,885$ 1,125$ 4,541$ 1,725$ 2,238$ 3,942$
T550 iT4 2,600$ 1,213$ 3,835$ 1,790$ 5,070$ 2,366$ 2,149$ 4,495$
T550 T4 2,957$ 1,380$ 3,150$ 1,228$ 4,958$ 1,883$ 2,444$ 4,305$
T590 iT4 2,820$ 1,316$ 4,160$ 1,941$ 5,500$ 2,567$ 2,332$ 4,877$
T590 T4 3,177$ 1,483$ 3,385$ 1,320$ 5,328$ 2,024$ 2,626$ 4,626$
T630 2,956$ 1,380$ 4,360$ 2,035$ 5,765$ 2,690$ 2,444$ 5,111$
T630 T4 3,291$ 1,536$ 3,507$ 1,367$ 5,520$ 2,097$ 2,721$ 4,792$
T650 3,178$ 1,483$ 4,688$ 2,188$ 6,198$ 2,892$ 2,628$ 5,496$
T650 T4 3,514$ 1,640$ 3,744$ 1,459$ 5,892$ 2,238$ 2,905$ 5,116$
T650 1M T4 3,928$ 1,833$ 4,186$ 1,632$ 6,588$ 2,502$ 3,248$ 5,720$
T750 3,707$ 1,730$ 5,468$ 2,552$ 7,229$ 3,373$ 3,064$ 6,409$
T750 iT4 4,002$ 1,867$ 5,902$ 2,754$ 7,803$ 3,641$ 3,308$ 6,919$
T770 4,024$ 1,878$ 5,935$ 2,770$ 7,846$ 3,661$ 3,326$ 6,957$
T770 iT4 4,196$ 1,958$ 6,190$ 2,889$ 8,183$ 3,819$ 3,469$ 7,256$
T870 4,431$ 2,068$ 6,535$ 3,050$ 8,640$ 4,032$ 3,663$ 7,660$
T870 iT4 4,564$ 2,130$ 6,732$ 3,142$ 8,901$ 4,154$ 3,773$ 7,892$
AWS 9974359 9974352 9974407 9974416 9974372 9974365 9978063 9974378
A770 2,818$ 1,409$ 4,157$ 2,078$ 5,495$ 2,748$ 2,469$ 5,221$
A770 iT4 3,055$ 1,528$ 4,506$ 2,253$ 5,957$ 2,979$ 2,676$ 5,659$
MT 9974358 9974351 9974406 9974415 9974371 9974364 N/A 9974377
MT52 810$ 506$ 1,195$ 747$ 1,579$ 987$ N/A 1,875$
MT55 865$ 541$ 1,276$ 798$ 1,687$ 1,054$ N/A 2,003$
VersaHandlers 9974361 9974354 9974408 9974417 9974374 9974367 N/A 9974380
V417 4,400$ 1,833$ 6,599$ 2,704$ 8,799$ 3,575$ N/A 6,792$
Work Machines 9974360 9974353 9974413 9974421 9974373 9974366 N/A 9974379
5600 / 5600T 2,235$ 1,252$ 3,296$ 1,846$ 4,358$ 2,440$ N/A 4,637$
5600T T4 2,511$ 1,406$ 2,470$ 1,252$ 4,074$ 1,919$ N/A 4,387$
5610 2,900$ 1,624$ 4,278$ 2,396$ 5,655$ 3,167$ N/A 6,017$
5610T T4 3,176$ 1,779$ 3,124$ 1,583$ 5,153$ 2,428$ N/A 5,550$
Excavators 9974362 9974356 9974411 9974418 9974375 9974369 N/A 9974381
324 1,062$ 546$ 1,567$ 806$ 2,072$ 1,066$ N/A 2,025$
418 796$ 409$ 1,174$ 604$ 1,553$ 798$ N/A 1,517$
418 T4 808$ 416$ 1,192$ 613$ 1,576$ 810$ N/A 1,540$
E20 T4 991$ 557$ 1,461$ 822$ 1,932$ 1,087$ N/A 2,065$
E26 1,176$ 661$ 1,734$ 975$ 2,293$ 1,290$ N/A 2,450$
E26 T4 1,176$ 661$ 1,734$ 975$ 2,293$ 1,290$ N/A 2,450$
E32 1,481$ 833$ 2,184$ 1,229$ 2,888$ 1,624$ N/A 3,086$
E32i T4 1,467$ 825$ 2,163$ 1,217$ 2,860$ 1,609$ N/A 3,057$
E32 T4 1,591$ 895$ 1,561$ 796$ 2,579$ 1,221$ N/A 2,792$
E35 1,525$ 858$ 2,250$ 1,266$ 2,975$ 1,673$ N/A 3,179$
E35i T4 1,511$ 850$ 2,228$ 1,253$ 2,946$ 1,657$ N/A 3,148$
E35 T4 1,634$ 919$ 1,603$ 818$ 2,648$ 1,254$ N/A 2,867$
E42 1,533$ 862$ 2,261$ 1,272$ 2,990$ 1,682$ N/A 3,195$
E42 T4 1,697$ 954$ 1,665$ 849$ 2,750$ 1,303$ N/A 2,978$
E45 1,749$ 984$ 2,580$ 1,451$ 3,410$ 1,918$ N/A 3,645$
E45 T4 1,912$ 1,076$ 1,877$ 957$ 3,100$ 1,468$ N/A 3,356$
E50 1,959$ 1,102$ 2,890$ 1,625$ 3,820$ 2,149$ N/A 4,083$
E50 T4 2,134$ 1,200$ 2,094$ 1,068$ 3,458$ 1,638$ N/A 3,744$
E55 2,255$ 1,268$ 3,326$ 1,871$ 4,397$ 2,473$ N/A 4,699$
E55 T4 2,422$ 1,362$ 2,377$ 1,213$ 3,926$ 1,860$ N/A 4,251$
E60 2,606$ 1,489$ 3,844$ 2,196$ 5,082$ 2,904$ N/A 5,517$
E63 T4 2,892$ 1,653$ 4,266$ 2,438$ 5,639$ 3,222$ N/A 6,123$
E80 3,301$ 1,886$ 4,869$ 2,782$ 6,437$ 3,678$ N/A 6,989$
E85 T4 3,637$ 2,079$ 5,365$ 3,066$ 7,093$ 4,053$ N/A 7,701$
Check BobcatNET Pricing Homepage for current Canadian exchange rate.
** Highlighted plans include price deduction for the Factory sponored 36/3000 Engine coverage.
North American Suggested List Prices.
PROTECTION PLUS PRICES
All Prices are in U.S. Dollars.
Check BobcatNET Pricing Homepage for current Canadian exchange rate.
Effective 1-1-2015
North American Suggested List Prices.
Effective 1-1-2015
All Prices are in U.S. Dollars.
** Highlighted plans include price deduction for the Factory sponored 36/3000 Engine coverage.
February 1, 2015
BOBCAT SLP Pages
Part Skid Steer Loader Discount Percent
Number Description
M0041 S70 Bobcat Skid-Steer Loader (equipped with T4 engine) $20,323.00 #REF! #REF!
Part Factory Installed Options Discount Percent
Number Description
Cab Enclosure with Heater and Sound Reduction #REF! #REF!
Includes Heater, Front Door with Wiper, Top and Side Sliding Windows, Side
Instrument Panel and Sound Reducing Foam Insulation.
Sound Reduction Option #REF! #REF!
Includes Sound Reducing Foam Insulation, Top Window and Rear Portion of Side
Windows.
M0041-R05-C03 Suspension Seat $185.00 #REF! #REF!
23x 8.50-12, 6 PR, Heavy Duty Tires #REF! #REF!
Set of four tires in place of base equipment. Loader width 44”
Part Skid Steer Loader Discount Percent
Number Description
M0201 S450 Bobcat Skid-Steer Loader (equipped with T4 engine) $33,085.00 #REF! #REF!
Part Air Conditioned/Heated Cab Packages Discount Percent
Number Description
M__-P01-A51 A51 Option Package $4,828.00 #REF! #REF!
Price
Price
$185.00
SLP in US$
SLP in US$
M0041-R02-C02 $1,750.00
M0041-A01-C04 $220.00
M0041-R09-C02
SLP in US$ Price
SLP in US$ Price
A51
Enclosed Cab with AC/Heat
Suspension Seat
Cab Accessories Package*
Power Bob-Tach
Part Heated Cab Packages Discount Percent
Number Description
M__-P01-H51 H51 Option Package $3,393.00 #REF! #REF!
H51
Enclosed Cab with Heat
Suspension Seat
Cab Accessories Package*
Power Bob-Tach
Part Open Cab Packages Discount Percent
Number Description
M__-P01-O31 O31 Option Package $797.00 #REF! #REF!
O31
Suspension Seat
Cab Accessories Package*
*Cab Accessories Pkg Incls: Deluxe Headliner with Dome Light, Cab Accessory Harness,
Power Port, Lower Interior Panels with Storage Compartments and cup holder.
Part Factory Installed Options Discount Percent
Number Description
Controls
M__-R01-C03 Advanced Control System (ACS)* $1,401.00 #REF! #REF!
Allows operator to select either hand or foot control of lift and tilt functions.
M__-R01-C04 Selectable Joystick Control (SJC) $2,660.00 #REF! #REF!Standard features include: Selectable patterns (ISO or H-Pattern), Horsepower Management, Speed
Management, Drive Response and Foot Pedal for Engine Speed Control. MUST
ORDER Cab Option Pkg
M__-R80-C02 *IF a Cab Option Pkg is not ordered, a Cab Accessories Pkg must be $395.00 #REF! #REF!ordered with Advanced Control System (ACS)
SLP in US$ Price
SLP in US$ Price
SLP in US$ Price
Part Skid Steer Loader Discount Percent
Number Description
M0251 S510 Skid Steer Loader (equipped with Final Tier 4 engine) $33,883.00 #REF! #REF!
M0257 S530 Skid Steer Loader (equipped with Final Tier 4 engine) $35,435.00 #REF! #REF!
Part Heated Cab Packages Discount Percent
PriceSLP in US$
SLP in US$ Price
Number Description
M__-P01-H51 H51 Option Package $3,393.00 #REF! #REF!
H51
Enclosed Cab with Heat
Suspension Seat
Cab Accessories Package*
Power Bob-Tach
Part Open Cab Packages Discount Percent
Number Description
M__-P01-O71 O71 Option Package $2,305.00 #REF! #REF!
M__-P01-O51 O51 Option Package $1,397.00 #REF! #REF!
M__-P01-O31 O31 Option Package $797.00 #REF! #REF!
O31 O51 O71
Suspension Seat Suspension Seat Suspension Seat
Cab Accessories Pkg* Cab Accessories Package* Cab Accessories Pkg*
Deluxe Instrument Panel with Keyless Start Deluxe Instrument Panel
with Keyless Start
Power Bob-Tach
Part Factory Installed Options Discount Percent PriceSLP in US$
SLP in US$ Price
*Cab Accessories Package : Deluxe Headliner with Dome Light, Cab Accessory
Harness, Power Port, Lower Interior Panels with Storage Compartments, and Cup
Attachment Control Kit
Number Description
Controls
M__-R01-C03 Advanced Control System (ACS)* $1,401.00 #REF! #REF!
Allows operator to select either hand or foot control of lift and tilt functions.
M__-R01-C04 Selectable Joystick Control (SJC) $2,195.00 #REF! #REF!Standard features include: Selectable patterns (ISO or H-Pattern), Horsepower Management, Speed
Management, Drive Response and Foot Pedal for Engine Speed Control. MUST
ORDER Cab Option Pkg
M__-R80-C02 *IF a Cab Option Pkg is not ordered, a Cab Accessories Pkg must be $415.00 #REF! #REF!ordered with ACS
Other Factory Installed Options
M__-R28-C02 7 Pin Attachment Control Kit $205.00 #REF! #REF!
Kit is included in H71 Opt Pkg
M__-P03-F20 Two Speed, Engine Block Heater $1,741.00 #REF! #REF!
M__-P03-F30 Two Speed, Hydraulic Bucket Positioning, Cold Weather Pkg $2,197.00 #REF! #REF!
M__-R11-C02 Hydraulic Bucket Positioning $468.00 #REF! #REF!
Bucket Positioning helps the operator to keep the same tilt of the load during lifting.
Includes On/Off switch.
M__-R05-C03 Suspension Seat - Required for Two Speed if not ordering a "Cab Opt Pkg". $499.00 #REF! #REF!
M__-R31-C02 Cold Weather Pkg (Incls Eng Block Heater and Larger Battery (950 cca)) $200.00 #REF! #REF!
M__-R05-C11 Air Ride Suspension Seat $314.00 #REF! #REF!
Must order a Cab Option package.
M__-R26-C02 Radio $417.00 #REF! #REF!
Must order a Cab Option package.
Includes weatherproof AM/FM/NOAAWeather Band Radio, Speakers, and Antenna.
Works with MP3 or other portable music player.
Tire Options
(Set of 4 Tires in Place of Base Equipment)
M__-R09-C02 10-16.5, 10 Pr, Bobcat Heavy Duty Tires $247.00 #REF! #REF!
M__-R09-C03 10-16.5, 10 Pr, Bobcat Heavy Duty Tires Offset $289.00 #REF! #REF!
M__-R09-C04 10-16.5, 10 Pr, Bobcat Severe Duty Tires $929.00 #REF! #REF!
M__-R09-C05 10-16.5, 10 Pr, Bobcat Severe Duty-Poly Fill Tires $1,544.00 #REF! #REF!
M__-R09-C06 31 x 12-16.5, 10 PR, Bobcat Heavy Duty Wide Flotation Tires $582.00 #REF! #REF!
Part Skid Steer Loader Discount Percent PriceSLP in US$
Number Description
M0253 S550 Skid Steer Loader (equipped with Final Tier 4 engine) $37,123.00 #REF! #REF!
M0259 S570 Skid Steer Loader (equipped with Final Tier 4 engine) $39,192.00 #REF! #REF!
M0261 S590 Skid Steer Loader (equipped with Final Tier 4 engine) $40,519.00 #REF! #REF!
Part Air Conditioned/Heated Cab Packages Discount Percent
Number Description
M__-P01-A91 A91 Option Package $9,788.00 #REF! #REF!
M__-P01-A71 A71 Option Package $6,165.00 #REF! #REF!
M__-P01-A51 A51 Option Package $4,930.00 #REF! #REF!
M__-P01-A31 A31 Option Package $4,295.00 #REF! #REF!
A31 A51 A71 A91
Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat Enclosed Cab with
AC/Heat
Cab Accessories Package* Cab Accessories Pkg* Cab Accessories Pkg*
Suspension Seat Power Bob-Tach Power Bob-Tach Power Bob-Tach
Sound Reduction Sound Reduction
Deluxe Instrument Panel
w/Keyless Start
Deluxe Instrument
Panel w/Keyless Start
Attachment Control Kit Attachment Control
High Flow Hydraulics
Hydraulic Bucket
Positioning
Cold Weather Pkg
Part Heated Cab Packages Discount Percent
Number Description
M__-P01-H51 H51 Option Package $3,495.00 #REF! #REF!
Price
Price
SLP in US$
Cab Accessories Package*
SLP in US$
H51
Enclosed Cab with Heat
Suspension Seat
Cab Accessories Package*
Power Bob-Tach
Part Open Cab Packages Discount Percent
Number Description
M__-P01-O71 O71 Option Package $2,373.00 #REF! #REF!
M__-P01-O51 O51 Option Package $1,440.00 #REF! #REF!
M__-P01-O31 O31 Option Package $822.00 #REF! #REF!
O31 O51 O71
Suspension Seat Suspension Seat Suspension Seat
Cab Accessories Package* Cab Accessories Package* Cab Accessories Pkg*
Deluxe Instrument Panel with Keyless Start Deluxe Instrument Panel
w/Keyless Start
Power Bob-Tach
Part Factory Installed Options Discount Percent
PriceSLP in US$
*Cab Accessories Package : Deluxe Headliner with Dome Light, Cab Accessory
Harness, Power Port, Lower Interior Panels with Storage Compartments, and Cup
Attachment Control Kit
SLP in US$ Price
Number Description
Controls
M__-R01-C03 Advanced Control System (ACS) $1,401.00 #REF! #REF!
Allows operator to select either hand or foot control of lift and tilt functions.
M__-R01-C04 Selectable Joystick Control (SJC) $2,195.00 #REF! #REF!Standard features include: Selectable patterns (ISO or H-Pattern), Horsepower Management, Speed
Management, Drive Response and Foot Pedal for Engine Speed Control. MUST
ORDER Cab Option Pkg
M__-R80-C02 Cab Accessories Pkg - *IF a Cab Option Pkg is not ordered, this must be $415.00 #REF! #REF!ordered with ACS
Other Factory Installed Options
M__-R05-C11 Air Ride Suspension Seat $314.00 #REF! #REF!
Must order a Cab Option package.
M__-R26-C02 Radio $417.00 #REF! #REF!
Must order a Cab Option package.
Includes weatherproof AM/FM/NOAAWeather Band Radio, Speakers, and Antenna.
Works with MP3 or other portable music player.
M__-R03-C03 High Flow Hydraulics $1,571.00 #REF! #REF!
Provides 26.7 GPM and 3500 PSI for attachment operation.
The 7 pin attachment control kit is required.
M__-R28-C02 Attachment 7 Pin Control Kit $205.00 #REF! #REF!
Required when ordering High Flow Hydrdaulics.
Kit is included in A91, A71, H71 & O71 Opt Pkgs
M__-P03-F50 High Flow Hydraulics, Two Speed, Hydraulic Bucket $3,732.00 #REF! #REF!
Positioning, Cold Weather Package
M__-R04-C02 Two Speed $1,582.00 #REF! #REF!
Includes 2-speed motors and 3-Point Seat Belt.
Low Travel Speed 7.4 MPH, High Travel Speed 11.0 MPH.
Suspenion Seat is required.
M__-R05-C03 Suspension Seat with Three Point Belt $499.00 #REF! #REF!
Required if not ordering a Cab Opt Pkg when ordering Two Speed Option
M__-P03-F20 Two Speed, Cold Weather Package $1,741.00 #REF! #REF!
M__-P03-F30 Two Speed, Hydraulic Bucket Positioning, Cold Weather Package $2,197.00 #REF! #REF!
M__-R11-C02 Hydraulic Bucket Positioning $468.00 #REF! #REF!
Bucket Positioning helps the operator to keep the same tilt of the load during lifting.
Includes On/Off switch.
M__-R31-C02 Cold Weather Pkg (Incls Eng Block Heater and Larger Battery (950 cca)) $200.00 #REF! #REF!
M__-P03-F10 Hydraulic Bucket Positioning, Cold Weather Pkg $653.00 #REF! #REF!
Tire Options (S550 & S570)
(Set of 4 Tires in Place of Base Equipment)
M__-R09-C02 10-16.5, 10 Pr, Bobcat Heavy Duty Tires $247.00 #REF! #REF!
M__-R09-C03 10-16.5, 10 Pr, Bobcat Heavy Duty Tires Offset $289.00 #REF! #REF!
M__-R09-C04 10-16.5, 10 Pr, Bobcat Severe Duty Tires $929.00 #REF! #REF!
M__-R09-C05 10-16.5, 10 Pr, Bobcat Severe Duty-Poly Fill Tires $1,544.00 #REF! #REF!
M__-R09-C06 31 x 12-16.5, 10 PR, Bobcat Heavy Duty Wide Flotation Tires $582.00 #REF! #REF!
Tire Options (S590)
(Set of 4 Tires in Place of Base Equipment)
M0261-R09-C02 10-16.5, 10 Pr, Bobcat Heavy Duty Tires $0.00 #REF! #REF!
M0261-R09-C03 10-16.5, 10 Pr, Bobcat Heavy Duty Tires Offset $53.00 #REF! #REF!
M0261-R09-C04 10-16.5, 10 Pr, Bobcat Severe Duty Tires $688.00 #REF! #REF!
M0261-R09-C05 10-16.5, 10 Pr, Bobcat Severe Duty-Poly Fill Tires $1,302.00 #REF! #REF!
Part Skid Steer Loader Discount Percent
Number Description
M0265 S630 Skid Steer Loader (equipped with Final Tier 4 engine) $43,076.00 #REF! #REF!
M0269 S650 Skid Steer Loader (equipped with Final Tier 4 engine) $45,459.00 #REF! #REF!
Part Air Conditioned/Heated Cab Packages Discount Percent
Number Description
M__-P01-A91 A91 Option Package $10,137.00 #REF! #REF!
M__-P01-A71 A71 Option Package $6,349.00 #REF! #REF!
M__-P01-A51 A51 Option Package $5,076.00 #REF! #REF!
M__-P01-A31 A31 Option Package $4,425.00 #REF! #REF!
A31 A71 A91
Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat
Suspension Seat Suspension Seat Suspension Seat
Cab Accessories Package* Cab Accessories Package* Cab Accessories Pkg*
Price
SLP in US$ Price
SLP in US$
Power Bob-Tach Power Bob-Tach
A51 Sound Reduction Sound Reduction
Enclosed Cab with AC/Heat Deluxe Instrument Panel with Keyless Start Deluxe Instrument Panel
with Keyless Start
Suspension Seat Attachment Control Kit Attachment Control Kit
Cab Accessories Package* High Flow Hydraulics
Power Bob-Tach Two Speed with 3-Point Belt
Hydraulic Bucket
Positioning
Engine Block Heater
Part Heated Cab Packages Discount Percent
Number Description
M__-P01-H51 H51 Option Package $3,600.00 #REF! #REF!
H51
Enclosed Cab with Heat
Suspension Seat
Cab Accessories Package*
Power Bob-Tach
Part Open Cab Packages Discount Percent
Number Description
M__-P01-O71 O71 Option Package $2,443.00 #REF! #REF!
M__-P01-O51 O51 Option Package $1,484.00 #REF! #REF!
M__-P01-O31 O31 Option Package $848.00 #REF! #REF!
O31 O51 O71
Suspension Seat Suspension Seat Suspension Seat
Cab Accessories Package* Cab Accessories Package* Cab Accessories Pkg*
Deluxe Instrument Panel with Keyless Start Deluxe Instrument Panel
with Keyless Start
Power Bob-Tach
Attachment Control Kit
*Cab Accessories Package : Deluxe Headliner with Dome Light, Cab Accessory
Harness, Power Port, Lower Interior Panels with Storage Compartments, and Cup
Holder.
SLP in US$ Price
SLP in US$ Price
Part Factory Installed Options Discount Percent
Number Description
Controls
M__-R01-C03 Advanced Control System (ACS) $1,504.00 #REF! #REF!
Allows operator to select either hand or foot control of lift and tilt functions. .
M__-R01-C04 Selectable Joystick Control (SJC) $2,395.00 #REF! #REF!Standard features include: Selectable patterns (ISO or H-Pattern), Horsepower
Management, Speed Management, Drive Response and Foot Pedal for Engine Speed
Control. MUST ORDER a Cab Pkg
*IF a Cab Option Pkg is not ordered, a Cab Accessories Pkg must be $415.00 #REF! #REF!ordered with ACS
Tire Options
(Set of 4 Tires in Place of Base Equipment)
M__-R09-C03 12-16.5, 12 Pr, Bobcat Heavy Duty Tires Offset $85.00 #REF! #REF!
Loader width 68"
M__-R09-C04 12-16.5, 12 Pr, Bobcat Severe Duty Tires $840.00 #REF! #REF!
Loader width 72"
M__-R09-C05 12-16.5, 12 Pr, Bobcat Severe Duty-Poly Fill Tires $1,654.00 #REF! #REF!
Loader width 72"
M__-R09-C11 33 x 15.5-16.5, 12 PR, Bobcat Super Float Tires- Offset Rims $882.00 #REF! #REF!
Loader width 74"
Factory Installed Options
M__-R05-C11 Air Ride Suspension Seat $314.00 #REF! #REF!
Must order an A,H or O cab package.
M__-R26-C02 Radio $417.00 #REF! #REF!
Must order an A,H or O cab package.
Includes weatherproof AM/FM/NOAAWeather Band Radio, Speakers, and Antenna.
Works with MP3 or other portable music player.
M__-R03-C03 High Flow Hydraulics $1,883.00 #REF! #REF!
Provides 30.5 GPM and 3500 PSI for attachment operation.
M__-R28-C02 Attachment 7 Pin Control Kit $205.00 #REF! #REF!
Required when ordering High Flow Hydrdaulics.
Kit is included in A91, A71, H71 & O71 Opt Pkgs
M__-P03-F50 High Flow Hydraulics, Two Speed, Hydraulic Bucket
Positioning, Engine Block Heater $3,950.00 #REF! #REF!
M__-R04-C02 Two Speed $1,582.00 #REF! #REF!
Includes 2-speed motors and Spring Applied/Pressure Release (SAPR) Brake.
Low Travel Speed 7.1 MPH, High Travel Speed 12.3 MPH.
When ordering 2 speed option, the Bobcat Ordering systems will automatically add the
SLP in US$ Price
Suspension Seat with 3 Point Belt if the Two Speed Option is ordered; unless you are ordering
a Cab Option Package which includes the suspension seat
M__-R05-C03 Suspension Seat with Three Point Belt $499.00 #REF! #REF!
Required if not ordering a Cab Opt Pkg when ordering Two Speed Option
M__-P03-F30 Two Speed, Hydraulic Bucket Positioning, Engine Block Heater $2,111.00 #REF! #REF!
M__-P03-F20 Two Speed, Engine Block Heater $1,654.00 #REF! #REF!
M__-R11-C02 Hydraulic Bucket Positioning $468.00 #REF! #REF!
Bucket Positioning helps the operator to keep the same tilt of the load during lifting.
Includes On/Off switch
M__-A01-C02 Engine Block Heater $111.00 #REF! #REF!
M__-P03-F10 Hydraulic Bucket Positioning, Engine Block Heater $566.00 #REF! #REF!
Part Skid Steer Loader Discount Percent
Number Description
M0179 S750 Skid Steer Loader (equipped with Final T4 engine) $56,715.00 #REF! #REF!
M0183 S770 Skid Steer Loader (equipped with Final T4 engine) $58,339.00 #REF! #REF!
Part Air Conditioned/Heated Cab Packages Discount Percent
Number Description
M__-P01-A91 A91 Option Package $10,137.00 #REF! #REF!
M__-P01-A71 A71 Option Package $6,349.00 #REF! #REF!
M__-P01-A51 A51 Option Package $5,076.00 #REF! #REF!
M__-P01-A31 A31 Option Package $4,425.00 #REF! #REF!
A31 A71 A91
Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat
Suspension Seat Suspension Seat Suspension Seat
Cab Accessories Package* Cab Accessories Package* Cab Accessories Pkg*
Power Bob-Tach Power Bob-Tach
Sound Reduction Sound Reduction
A51 Deluxe Instrument Panel with Keyless Start Deluxe Instrument Panel
with Keyless Start
Enclosed Cab with AC/Heat Attachment Control Kit Attachment Control Kit
Suspension Seat High Flow Hydraulics
Cab Accessories Package* Two Speed with 3 Point Belt
Power Bob-Tach Hydraulic Bucket
Positioning
Engine Block Heater
Part Heated Cab Packages Discount Percent
Number Description
Price
SLP in US$
SLP in US$
SLP in US$
Price
Price
M__-P01-H51 H51 Option Package $3,600.00 #REF! #REF!
H51
Enclosed Cab with Heat
Suspension Seat
Cab Accessories Package*
Power Bob-Tach
Part Open Cab Packages Discount Percent
Number Description
M__-P01-O71 O71 Option Package $2,443.00 #REF! #REF!
M__-P01-O51 O51 Option Package $1,484.00 #REF! #REF!
M__-P01-O31 O31 Option Package $848.00 #REF! #REF!
O31 O51 O71
Suspension Seat Suspension Seat Suspension Seat
Cab Accessories Package* Cab Accessories Package* Cab Accessories Pkg*
Deluxe Instrument Panel with Keyless Start Deluxe Instrument Panel
with Keyless Start
Power Bob-Tach
Part Factory Installed Options Discount Percent
Number Description
Controls
M__-R01-C03 Advanced Control System (ACS) $1,504.00 #REF! #REF!
Allows operator to select either hand or foot control of lift and tilt functions.
M__-R01-C04 Selectable Joystick Control (SJC) $2,395.00 #REF! #REF!Standard features include: Selectable patterns (ISO or H-Pattern), Horsepower
Management, Speed Management, Drive Response and Foot Pedal for Engine Speed
Control. MUST ORDER a Cab Opt Pkg
*IF a Cab Option Pkg is not ordered, a Cab Accessories Pkg must be $415.00 #REF! #REF!ordered with ACS
Tire Options
(Set of 4 Tires in Place of Base Equipment)
M__-R09-C03 12-16.5, 12 Pr, Bobcat Heavy Duty Tires Offset $85.00 #REF! #REF!
PriceSLP in US$
*Cab Accessories Package : Deluxe Headliner with Dome Light, Cab Accessory
Harness, Power Port, Lower Interior Panels with Storage Compartments, and Cup
Attachment Control Kit
SLP in US$ Price
Loader width 68.5”
M__-R09-C04 12-16.5, 12 Pr, Bobcat Severe Duty Tires $840.00 #REF! #REF!
Loader width 72.1”
M__-R09-C05 12-16.5, 12 Pr, Bobcat Severe Duty-Poly Fill Tires $1,654.00 #REF! #REF!
Loader width 72.1”
M__-R09-C11 33 x 15.5-16.5, 12 PR, Bobcat Super Float Tires- Offset Rims $882.00 #REF! #REF!
Loader width 72.1”
Other Factory Installed Options
M__-R05-C11 Air Ride Suspension Seat $314.00 #REF! #REF!
Must order a Cab Option package.
M__-R26-C02 Radio $417.00 #REF! #REF!
Must order a Cab Option package.
Includes weatherproof AM/FM/NOAAWeather Band Radio, Speakers, and Antenna.
Works with MP3 or other portable music player.
M__-R03-C03 High Flow Hydraulics $1,883.00 #REF! #REF!
Provides 36.5 GPM and 3500 PSI for attachment operation.
When ordering High Flow Hydraulics, the Bobcat Ordering systems will automatically add
the 7 Pin Attachment Control Kit. Unless you are ordering an A71, H71 or O71 Cab Package
that includes the Attachment Control Kit.
M__-R28-C02 Attachment 7 Pin Control Kit $205.00 #REF! #REF!
Required when ordering High Flow Hydrdaulics.
Kit is included in A91, A71, H71 & O71 Opt Pkgs
M__-P03-F50 High Flow Hydraulics, Two Speed, Hydraulic Bucket $3,950.00 #REF! #REF!
Positioning, Engine Block Heater
M__-R04-C02 Two Speed $1,582.00 #REF! #REF!
Includes 2-speed motors and Spring Applied/Pressure Release (SAPR) Brake.
Low Travel Speed 7.1 MPH, High Travel Speed 12.3 MPH.
When ordering 2 Speed option, the Bobcat Ordering systems will automatically add the
Suspension seat with 3 point seat belt; Unless you are ordering a Cab Option Package
which includes the suspension seat.
M__-R05-C03 Suspension Seat with Three Point Belt - Required if ordering a Two-Speed $499.00 #REF! #REF!
with No Cab Option Pkg
M__-P03-F20 Two Speed, Engine Block Heater $1,654.00 #REF! #REF!
M__-P03-F30 Two Speed, Hydraulic Bucket Positioning, Engine Block Heater $2,111.00 #REF! #REF!
M__-R11-C02 Hydraulic Bucket Positioning $468.00 #REF! #REF!
Bucket Positioning helps the operator to keep the same tilt of the load during lifting.
Includes On/Off switch.
M__-A01-C02 Engine Block Heater $111.00 #REF! #REF!
M__-P03-F10 Hydraulic Bucket Positioning, Engine Block Heater $566.00 #REF! #REF!
Part Skid Steer Loader Discount Percent PriceSLP in US$
Number Description
M0191 S850 Skid Steer Loader (equipped with iT4 engine) $67,036.00 #REF! #REF!
Part Air Conditioned/Heated Cab Packages Discount Percent
Number Description
M0191-P01-A91 A91 Option Package $8,784.00 #REF! #REF!
M0191-P01-A71 A71 Option Package $6,349.00 #REF! #REF!
M0191-P01-A51 A51 Option Package $5,076.00 #REF! #REF!
M0191-P01-A31 A31 Option Package $4,425.00 #REF! #REF!
A31 A51 A71 A91
Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat Enclosed Cab with
AC/Heat
Cab Accessories Package* Cab Accessories Pkg* Cab Accessories Pkg*
Power Bob-Tach Power Bob-Tach Power Bob-Tach
Sound Reduction Sound Reduction
Deluxe Instrument Panel
with Keyless Start
Deluxe Instrument
Panel with Keyless Start
Attachment Control Kit Attachment Control
High Flow Hydraulics
Hydraulic Bucket
Positioning
Engine Block Heater
Part Heated Cab Packages Discount Percent
Number Description
M0191-P01-H51 H51 Option Package $3,600.00 #REF! #REF!
H51
Enclosed Cab with Heat
SLP in US$ Price
Cab Accessories Package*
SLP in US$ Price
Cab Accessories Package*
Power Bob-Tach
Part Open Cab Packages Discount Percent
Number Description
M0191-P01-O71 O71 Option Package $2,443.00 #REF! #REF!
M0191-P01-O51 O51 Option Package $1,484.00 #REF! #REF!
O51 O71
Cab Accessories Package* Cab Accessories Package*
Deluxe Instrument Panel with Deluxe Instrument Panel with Keyless Start
Keyless Start Power Bob-Tach
Attachment Control Kit
SLP in US$ Price
Part Factory Installed Options Discount Percent
Number Description
Controls
M0191-R01-C04 Selectable Joystick Control (SJC) $1,295.00 #REF! #REF!Standard features include: Selectable patterns (ISO or H-Pattern), Horsepower Management, Speed
Management, Drive Response and Foot Pedal for Engine Speed Control. MUST ORDER a Cab Option
Pkg
Part Factory Installed Options Discount Percent
Number Description
Tire Options
(Set of 4 Tires in Place of Base Equipment)
M0191-R09-C04 14-17.5, 14 Pr, Bobcat Severe Duty Tires $1,353.00 #REF! #REF!
Loader width 79"
M0191-R09-C05 14-17.5, 14 Pr, Bobcat Severe Duty-Poly Fill Tires $2,592.00 #REF! #REF!
Loader width 79"
Factory Installed Options
M0191-R05-C12 Air Ride Suspension Seat $314.00 #REF! #REF!
M0191-R26-C02 Radio $417.00 #REF! #REF!
Must order A Cab Option Package.
Includes weatherproof AM/FM/NOAAWeather Band Radio, Speakers, and Antenna.
Works with MP3 or other portable music player.
M0191-R03-C03 High Flow Hydraulics $1,883.00 #REF! #REF!
Provides 37 GPM and 3500 PSI for attachment operation.
The Bobcat Ordering systems will automatically add the 7 Pin Attachment Control Kit if the High Flow
Hydraulics are ordered; Unless you are ordering an A71 or O71 Cab Option Package that includes the
Attachment Control Kit
M0191-R28-C02 Attachment 7 Pin Control Kit $205.00 #REF! #REF!
Required when ordering High Flow Hydrdaulics.
Kit is included in A91, A71, H71 & O71 Opt Pkgs
M0191-R11-C02 Hydraulic Bucket Positioning $468.00 #REF! #REF!
Bucket Positioning helps the operator to keep the same tilt of the load during lifting.
Includes On/Off switch
M0191-A01-C02 Engine Block Heater $111.00 #REF! #REF!
M0191-P03-F10 Hydraulic Bucket Positioning, Engine Block Heater $566.00 #REF! #REF!
SLP in US$ Price
SLP in US$ Price
*Cab Accessories Package : Deluxe Headliner with Dome Light, Cab Accessory Harness, Power Port, Lower Interior
Panels with Storage Compartments, and Cup Holder.
February 1, 2015
BOBCAT SLP Pages
Part Compact Track Loader Discount Percent
Number Description
M0207 T450 Compact Track Loader (equipped with Tier 4 Engine) $45,128.00 #REF!
Part Air Conditioned/Heated Cab Packages Discount Percent
Number Description
M__-P01-A81 A81 Option Package $7,706.00 #REF!
A81
Enclosed Cab with AC/Heat
Two Speed
Cab Accessories Package*
Power Bob-Tach
Sound Reduction
Deluxe Instrument Panel with Keyless Start
Attachment Control Kit
3-Point Seat Belt
Part Open Cab Packages Discount Percent
Number Description
M__-P01-O71 O71 Option Package $2,055.00 #REF!
O71
Cab Accessories Package*
Power Bob-Tach
Deluxe Instrument Panel with Keyless Start
Attachment Control Kit
SLP in US$
SLP in US$
SLP in US$
Part Factory Installed Options Discount Percent
Number Description
Controls
M__-R01-C03 Advanced Control System (ACS)* $1,401.00 #REF!
Allows operator to select either hand or foot control of lift and tilt functions.
M__-R01-C04 Selectable Joystick Control (SJC)* $2,555.00 #REF!Standard features include: Selectable patterns (ISO or H-Pattern), Horsepower Management, Speed
Management, Drive Response and Foot Pedal for Engine Speed Control.
M__-R80-C02 *IF a Cab Option Pkg is not ordered, a Cab Accessories Pkg must be $415.00 #REF!ordered with ACS or SJC
Other Options
M__-R04-C02 Two Speed $1,859.00 #REF!
Incls 2-speed motor and 3-point seat belt. Low Travel Speed 7.3 MPH, High Travel Speed 11.0 MPH
*Cab Accessories Pkg Incls : Deluxe Headliner with Dome Light, Cab Accessory
Harness, Power Port, Lower Interior Panels with Storage Compartments, and Cup
Holder.
SLP in US$
Part Compact Track Loader Discount Percent
Number Description
M0255 T550 Compact Track Loader (equipped with Final Tier 4 Engine) $49,276.00 #REF!
M0263 T590 Compact Track Loader (equipped with Final Tier 4 engine) $52,952.00 #REF!
Part Air Conditioned/Heated Cab Packages Discount Percent
Number Description
M__-P01-A91 A91 Option Package $7,988.00 #REF!
M__-P01-A71 A71 Option Package $5,847.00 #REF!
M__-P01-A51 A51 Option Package $4,612.00 #REF!
M__-P01-A31 A31 Option Package $3,976.00 #REF!
A31 A51 A71 A91
Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat Enclosed Cab with
AC/Heat
Cab Accessories Package* Cab Accessories Package* Cab Accessories Pkg*
Power Bob-Tach Power Bob-Tach Power Bob-Tach
Sound Reduction Sound Reduction
Deluxe Instrument Panel
w/Keyless Start
Deluxe Instrument Panel
w/Keyless Start
Attachment Control Kit Attachment Control
High Flow Hydraulics
Hydraulic Bucket
Positioning
Cold Weather Pkg
Part Heated Cab Packages Discount Percent
SLP in US$
SLP in US$
Cab Accessories Package*
SLP in US$
Number Description
M__-P01-H51 H51 Option Package $3,177.00 #REF!
H51
Enclosed Cab with Heat
Suspension Seat
Cab Accessories Package*
Power Bob-Tach
Part Open Cab Packages Discount Percent
Number Description
M__-P01-O71 O71 Option Package $2,055.00 #REF!
M__-P01-O51 O51 Option Package $1,122.00 #REF!
O51 O71
Suspension Seat Suspension Seat
Cab Accessories Package* Cab Accessories Package*
Deluxe Instrument Panel with Keyless Start Deluxe Instrument Panel with
Keyless Start
Power Bob-Tach
Part Factory Installed Options Discount Percent
Number Description
Controls
M__ -R01-C03 Advanced Control System (ACS) $1,401.00 #REF!
Allows operator to select either hand or foot control of lift and tilt functions.
M__ -R01-C04 Selectable Joystick Control (SJC) $2,555.00 #REF!Standard features include: Selectable patterns (ISO or H-Pattern), Horsepower Management, Speed
Management, Drive Response and Foot Pedal for Engine Speed Control.
M__-R80-C02 *IF a Cab Option Pkg is not ordered, a Cab Accessories Pkg must be $415.00 #REF!ordered with ACS or SJC
Other Factory Installed Options
M__-R05-C11 Air Ride Suspension Seat $314.00 #REF!
Must order a Cab Option package.
SLP in US$
Attachment Control Kit*Cab Accessories Package : Deluxe Headliner with Dome Light, Cab Accessory
Harness, Power Port, Lower Interior Panels with Storage Compartments, and Cup
SLP in US$
M__-R26-C02 Radio $417.00 #REF!
Must order a Cab Option package.
Includes weatherproof AM/FM/NOAAWeather Band Radio, Speakers, and Antenna.
Works with MP3 or other portable music player.
M__-R03-C03 High Flow Hydraulics $1,571.00 #REF!
Provides 26.7 GPM and 3500 PSI for attachment operation.
The 7 pin attachment control kit is required.
M__-R28-C02 7 Pin Attachment Control Kit $205.00 #REF!
Required when ordering High Flow Hydrdaulics.
Kit is included in A91, A71 & O71 Opt Pkgs
M__-R11-C02 Hydraulic Bucket Positioning $468.00 #REF!
Bucket Positioning helps the operator to keep the same tilt of the load during lifting.
Includes On/Off switch.
M__-P03-F10 Hydraulic Bucket Positioning, Cold Weather Package $653.00 #REF!
M__-A01-C02 Cold Weather Package (Incs Eng Block Heater and Larger Battery (950 cca)) $200.00 #REF!
Track Options
M__-R09-C02 16" Rubber Track, with Solid Mount Carriage $1,437.00 #REF!
Includes Solid Mounted Undercarriage with 4 Solid Mounted Rollers
M__-R09-C03 12" Rubber Track with Roller Suspension Carriage $1,558.00 #REF!
Includes Solid Mounted undercarriage and 3 Rollers with Leaf Spring style suspension.
M__-R09-C04 16" Rubber Track with Roller Suspension Carriage $2,995.00 #REF!
Includes Solid Mounted undercarriage and 3 Rollers with Leaf Spring style suspension.
Part Compact Track Loader Discount Percent
Number Description
M0267 T630 Compact Track Loader (equipped with Final Tier 4 engine) $54,856.00 #REF!
M0271 T650 Compact Track loader (equipped with Final Tier 4 engine) $58,560.00 #REF!
Part Air Conditioned/Heated Cab Packages Discount Percent
Number Description
M__-P01-A91 A91 Option Package $10,137.00 #REF!
M__-P01-A71 A71 Option Package $6,030.00 #REF!
M__-P01-A51 A51 Option Package $4,757.00 #REF!
M__-P01-A31 A31 Option Package $4,106.00 #REF!
A31 A71 A91
Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat Enclosed Cab with AC/Heat
Cab Accessories Package* Cab Accessories Package* Cab Accessories Package*
Power Bob-Tach Power Bob-Tach
A51 Sound Reduction Sound Reduction
Enclosed Cab with AC/Heat Deluxe Instrument Panel with Keyless Start Deluxe Instrument Panel with Keyless Start
Cab Accessories Package* Attachment Control Kit Attachment Control Kit
Power Bob-Tach High Flow Hydraulics
Hydraulic Bucket Positioning
Two Speed, 3 pt Seat Belt
Engine Block Heater
Part Heated Cab Packages Discount Percent
Number Description
M__-P01-H51 H51 Option Package $3,282.00 #REF!
H51
SLP in US$
SLP in US$
SLP in US$
Enclosed Cab with Heat
Cab Accessories Package*
Power Bob-Tach
Part Open Cab Packages Discount Percent
Number Description
M__-P01-O71 O71 Option Package $2,125.00 #REF!
M__-P01-O51 O51 Option Package $1,166.00 #REF!
O51 O71
Cab Accessories Package* Cab Accessories Package*
Deluxe Instrument Panel with Deluxe Instrument Panel with Keyless Start
Keyless Start Power Bob-Tach
Attachment Control Kit
* Cab Accessories Package: Deluxe Headliner with Dome Light, Rear Cab Corner Trim, Cab Accessory
Harness, Power Port, Lower Interior Panels with Storage Compartments and Cup Holder.
Part Factory Installed Options Discount Percent
Number Description
Controls
M__-R01-C03 Advanced Control System (ACS) 1,504.00 #REF!
Allows operator to select either hand or foot control of lift and tilt functions.
M__-R01-C04 Selectable Joystick Control (SJC) 2,750.00 #REF!Standard features include: Selectable patterns (ISO or H-Pattern), Horsepower Management, Speed
Management, Drive Response and Foot Pedal for Engine Speed Control.
M__-R80-C02 *IF a Cab Option Pkg is not ordered, a Cab Accessories Pkg must be $395.00 #REF!ordered with ACS or SJC
Track Options
M__-R09-C02 17.7” Rubber Tracks $1,494.00 #REF!
Compatible with Solid Mounted or Roller Suspension Carriages - Width 78.0"
M__-R21-C02 Roller Suspension Carriage
Includes Solid Mounted undercarriage and 4 Rollers with Leaf Spring style suspension. $1,638.00 #REF!
Compatible with 18” tracks. - Width 78"
Individual Options
M__-R05-C11 Air Ride Suspension Seat $314.00 #REF!
SLP in US$
SLP in US$
M__-R26-C02 Radio $417.00 #REF!
Must order a Cab Option package.
Includes weatherproof AM/FM/NOAAWeather Band Radio, Speakers, and Antenna.
Works with MP3 or other portable music player.
Other Factory Installed Options
M__-R03-C03 High Flow Hydraulics $1,883.00 #REF!
Provides 30.5 GPM and 3500 PSI for attachment operation.
The Bobcat Ordering systems will automatically add the 7 Pin Attachment Control
Kit if the High Flow Hydraulics are ordered. Unless you are ordering a Cab Option
Package that includes the Attachment Control Kit
M__-R28-C02 Attachment 7 Pin Control Kit $205.00 #REF!
Required when ordering High Flow Hydrdaulics.
Kit is included in A91, A71, H71 & O71 Opt Pkgs
M__-P03-F50 High Flow Hydraulics, Two Speed, Hydraulic Bucket Positioning, $4,367.00 #REF!
Engine Block Heater
M__-RO4-C02 Two Speed $2,010.00 #REF!
Two Speed Option includes 3-Point Seat Belt
M__-P03-F30 Two Speed, Hydraulic Bucket Positioning, Engine Block Heater $2,529.00 #REF!
M__-P03-F20 Two Speed, Engine Block Heater $2,072.00 #REF!
M__-R11-C02 Hydraulic Bucket Positioning $468.00 #REF!
Bucket positioning helps the operator to keep the same tilt of the load during lifting.
Includes On/Off switch
M__-A01-C02 Engine Block Heater $111.00 #REF!
M__-P03-F10 Hydraulic Bucket Positioning, Engine Block Heater $566.00 #REF!
Part Compact Track Loader Discount Percent
Number Description
M0181 T750 Compact Track Loader (equipped with Final T4 engine) $72,194.00 #REF!
M0185 T770 Compact Track Loader (equipped with Final T4 engine) $75,441.00 #REF!
SLP in US$