PRICE LIST Yorkshire · PEGLER YORKSHIRE YORKSHIRE PRICE LIST CONTENTS Solder Ring Solutions YPS and YP General Range 3-8 Heating Components – Manifolds 7-9 Waste Fittings 8 Stopvalves

YorkshirePRICE LIST3RD MARCH 2014

PEGLER YORKSHIREYORKSHIRE PRICE LISTCONTENTS

Solder Ring SolutionsYPS and YP General Range 3-8

Heating Components – Manifolds 7-9

Waste Fittings 8

Stopvalves 8

Gate Valves 9

Plugcocks 9

Pipe Clips and Brackets 9

Chrome Plated 10

Polished Chrome 10

Accessories 11

Sundries 11

GHD 12-13

GHD Accessories 13

GHD Degreased 13

Maintaining a policy of continual product development Pegler Yorkshire Group Limited reserve the right to change specifications, design, materials and prices of products listed in this price list without prior notice.

All tee sizes are UK designation throughout this price list.

22

23

Price List – 3rd March 2014

YPS and YP General Range

YP1 SlipStraight Coupling, Slip PatternCopper x copper

SIZE BOX QTY CODE £ EACH

15mm 10 08037 3.4722mm 10 08038 7.2628mm 10 08039 10.67

YP1Straight CouplingCopper x copper

YP1RReducing CouplingCopper x copper


8 x 6mm 10 08056 10.5510 x 8mm 10 08057 9.2615 x 8mm 10 08058 6.5815 x 10mm 10 08059 6.3615 x 12mm 10 08060 4.8622 x 10mm 10 08062 9.3022 x 15mm 10 08063 6.2528 x 15mm 10 08065 14.2628 x 22mm 10 08066 8.7235 x 22mm 10 08067 20.9535 x 28mm 10 08068 21.3342 x 28mm 1 08069 35.6942 x 35mm 1 08070 31.3154 x 35mm 1 08071 54.9254 x 42mm 1 08072 59.96

YP1IM SlipAdaptor CouplingImperial x metric Copper x copperTo connect imperial tube to metric tube


1/2" x 15mm 10 08040 7.493/4" x 22mm 10 08050 6.581" x 28mm 10 08052 12.9411/4" x 35mm 10 08054 22.4311/2" x 42mm 1 08055 28.53

YP2Adaptor CouplingStraight female connector Copper x BSP parallel female thread


8mm x 1/4" 5 08087 11.1115mm x 1/2" 10 08090 7.8522mm x 3/4" 10 08092 11.3628mm x 1" 5 08093 21.4835mm x 11/4" 1 08094 38.5242mm x 11/2" 1 08095 49.9954mm x 2" 1 08096 79.27

YP2LCFemale Reducing ConnectorStraight female connector As YP2 but with reduced BSP female end


15mm x 1/4" 10 08101 13.9515mm x 3/8" 10 08102 15.6322mm x 1/2" 10 08103 18.07

YP2LIFemale Reducing ConnectorStraight female connector As YP2 but with reduced copper end


1/4" x 15mm 10 08106 19.52


6mm 10 08000 2.908mm 10 08001 2.9810mm 10 08003 1.5012mm 10 08005 1.3715mm 100 08010 0.5322mm 50 08020 1.4128mm 25 08030 3.1835mm 10 08032 10.7642mm 2 08034 17.9854mm 2 08035 33.1667mm 1 08036 98.44

YP5Tank ConnectorCopper x BSP parallel male thread with backnut


15mm x 1/2" 10 08160 16.7022mm x 3/4" 5 08161 25.4328mm x 1" 5 08162 33.4335mm x 11/4" 1 08163 44.5042mm x 11/2" 1 08164 58.3354mm x 2" 1 08165 89.12

YP3LCMale Reducing ConnectorAs YP3 but with reduced BSP taper male end


15mm x 1/4" 10 08129 9.1415mm x 3/8" 10 08132 12.6622mm x 1/2" 5 08133 18.7028mm x 3/4" 5 08134 29.47

YP5FCTank ConnectorCopper x BSP parallel male thread with backnut


15mm x 1/2" 5 08180 21.6222mm x 3/4" 5 08181 30.7828mm x 1" 1 08182 38.06

YP3LIMale Reducing ConnectorAs YP3 but with reduced copper end


3/4" x 15mm 10 08143 17.401" x 22mm 5 08144 26.55

YP7Female AdaptorMale copper for insertion into fitting x BSP parallel female threadThere is no solder ring in this fitting



YP3Straight Male ConnectorCopper x BSP taper male thread


8mm x 1/4" 10 08111 7.4915mm x 1/2" 10 08114 6.6722mm x 3/4" 10 08116 11.9328mm x 1" 10 08118 19.2835mm x 11/4" 1 08119 35.1042mm x 11/2" 1 08120 45.2154mm x 2" 1 08121 68.6467mm x 21/2" 1 08123 109.62

YP6ReducerLarger end male copper for insertion into fitting x female copper


8 x 6mm 10 08190 8.3910 x 8mm 10 08191 6.4612 x 6mm 10 08192 14.1812 x 8mm 10 08193 5.4215 x 8mm 10 08194 5.3315 x 10mm 10 08196 2.1315 x 12mm 10 08198 4.1322 x 12mm 10 08199 9.6122 x 15mm 50 08200 2.3828 x 15mm 10 08202 7.0328 x 22mm 10 08204 5.3935 x 15mm 10 08206 21.8435 x 22mm 10 08207 20.7335 x 28mm 10 08208 15.4042 x 15mm 1 08209 33.5242 x 22mm 1 08210 37.4242 x 28mm 1 08211 35.2542 x 35mm 1 08212 28.9654 x 15mm 1 08213 73.9654 x 22mm 1 08214 72.4954 x 28mm 1 08215 63.6754 x 35mm 1 08216 60.7554 x 42mm 1 08217 52.3967 x 28mm 1 08218 71.2267 x 35mm 1 08219 71.2267 x 42mm 1 08220 71.2267 x 54mm 1 08221 71.22

YPS Range

24

YP15Backplate ElbowCopper x BSP parallel female threadTriangular backplate three hole fixing


15mm x 1/2" 10 08365 14.0222mm x 3/4" 5 08367 30.10

Price List – 1st March 2013

YPS and YP General Range (contd)

YP99AdaptorMetric/imperial female copper x male copperTo adapt metric tube to imperial fittings


22mm x 3/4" 5 08921 6.4628mm x 1" 5 08922 8.6735mm x 11/4" 1 08923 17.0342mm x 11/2" 1 08924 24.11

YP14Female ElbowCopper x BSP parallel female thread


15mm x 1/2" 10 08351 11.5422mm x 3/4" 10 08353 16.7028mm x 1" 1 08354 28.90

YP14LCReducing Female ElbowAs YP14 but with reduced female end


22mm x 1/2" 10 08362 19.32

YP9BNon-standard AdaptorAdapts imperial tube of older 17G standard to metric fittings


1/2" 17G x 15mm 10 08245 7.58

YP11Union CouplingCopper x copperCone joint to BS 1010


15mm 10 08251 18.6822mm 5 08252 29.9128mm 1 08253 43.5835mm 1 08254 59.3242mm 1 08255 86.6754mm 1 08256 164.9967mm 1 08257 279.36

YP12RReducing ElbowAs YP12 but with one end reduced


22 x 15mm 10 08310 17.5928 x 22mm 10 08311 24.92

YP15LNBackplate ElbowAs YP15 but with extended nose and circular backplate


15mm x 1/2" 5 08377 29.72

YP21Obtuse ElbowCopper x copper


15mm 10 08410 2.6922mm 10 08412 5.6028mm 10 08414 10.7635mm 2 08416 34.7742mm 1 08417 61.9254mm 1 08418 112.0067mm 1 08419 203.21

YP18Slow BendCopper x copper


15mm 10 08390 2.2722mm 10 08391 4.4628mm 5 08392 8.62

YP20Return BendCopper x copper


15mm 5 08400 20.9922mm 1 08401 41.2528mm 1 08402 52.73

YP13Male ElbowCopper x BSP taper male thread


15mm x 1/2" 10 08333 13.3822mm x 3/4" 5 08334 18.9828mm x 1" 5 08335 28.5535mm x 11/4" 1 08336 41.8642mm x 11/2" 1 08337 49.78

YP22Partial CrossoverFemale copper x male copper for insertion into fitting


15mm 5 08420 12.7422mm 5 08422 26.98

YP8Male AdaptorMale copper for insertion into fitting x BSP taper male threadThere is no solder ring in this fitting



YP9Imperial female copper x metric male copperFor making the adaptation from imperial size tube to metric


1/2" x 15mm 10 08238 6.583/4" x 22mm 10 08239 7.261" x 28mm 5 08240 10.2811/4" x 35mm 1 08241 12.4411/2" x 42mm 1 08242 16.422" x 54mm 1 08243 38.77

YP12ElbowCopper x copper



YP12SStreet ElbowFemale copper x male copper for insertion into fitting


8mm 10 08315 8.6210mm 10 08316 7.5215mm 10 08318 1.9022mm 25 08320 5.7228mm 10 08322 16.7035mm 1 08324 38.8442mm 1 08325 54.67

YPS Range

25



YP24Equal TeeAll ends for copper

YP23Full CrossoverCopper x copper


15mm 5 08430 15.1422mm 5 08432 31.02

YP24 SlipEqual Tee, slip patternAll ends for copper


15mm 5 08475 8.62

YP25Tee, reduced branchAll ends for copper

YPS Range

YP26Tee, one end reducedAll ends for copper


22 x 15 x 22mm 20 08510 9.2628 x 15 x 28mm 10 08512 31.3428 x 22 x 28mm 10 08514 28.6635 x 15 x 35mm 1 08516 55.4335 x 22 x 35mm 1 08517 52.6235 x 28 x 35mm 1 08518 62.1742 x 28 x 42mm 1 08519 112.2342 x 35 x 42mm 1 08520 102.6754 x 42 x 54mm 1 08521 185.70

YP28Tee, both ends reducedAll ends for copper


15 x 15 x 22mm 10 08551 11.9415 x 15 x 28mm 10 08553 31.1722 x 22 x 28mm 10 08555 28.2222 x 22 x 35mm 1 08557 44.5228 x 28 x 35mm 1 08558 56.0835 x 35 x 42mm 1 08559 78.47

YP27Tee, one end and branch reducedAll ends for copper


22 x 15 x 15mm 20 08530 7.9628 x 15 x 15mm 10 08532 35.4428 x 15 x 22mm 10 08534 41.1528 x 22 x 15mm 10 08536 28.8628 x 22 x 22mm 10 08538 26.1935 x 22 x 22mm 1 08539 80.0135 x 28 x 15mm 1 08540 63.9635 x 28 x 22mm 1 08541 55.3135 x 28 x 28mm 1 08542 48.6742 x 28 x 28mm 1 08543 102.0342 x 35 x 28mm 1 08544 76.5042 x 35 x 35mm 1 08545 107.5154 x 42 x 42mm 1 08546 161.17

YP29Female TeeCopper end and branch x BSP parallel female end


15 x 1/2" x 15mm 10 08570 11.0022 x 3/4" x 22mm 5 08572 31.97

YP30Female TeeCopper ends x BSP parallel female branchSIZE BOX QTY CODE £ EACH

15 x 15mm x 1/2" 10 08585 8.6122 x 22mm x 3/4" 5 08587 22.6828 x 28mm x 1" 1 08589 39.74

YP30BPBackplate TeeCopper ends x BSP parallel female branch with circular backplate


15 x 15mm x 1/2" 5 08600 33.15

RV35Air Release ValveMale copper end suitable for use in any capillary socket


15mm 10 08620 8.52

YP35Air Vent TeeComposed of YP37 sweep tee and air-release valve RV35Supplied with Dowty seal which should be removed before soldering This tee gives a round full bore flow


15mm 5 08615 25.90

YP29RFemale TeeAs YP29 but with reduced female BSP end


22 x 1/2" x 22mm 5 08575 18.7028 x 1/2" x 28mm 5 08576 34.5335 x 1/2" x 35mm 1 08578 64.90

YP30RFemale TeeAs YP30 but with reduced female BSP branch


15 x 15mm x 1/4" 5 08590 17.4922 x 22mm x 1/2" 10 08591 12.1728 x 28mm x 1/2" 5 08592 36.8428 x 28mm x 3/4" 5 08593 41.9835 x 35mm x 1/2" 1 08594 63.2835 x 35mm x 3/4" 1 08595 62.8542 x 42mm x 1/2" 1 08596 75.52

YP37Sweep Tee, 90°All ends for copper


15mm 5 08630 23.7122mm 5 08631 30.4528mm 1 08632 51.30




22 x 22 x 10mm 5 08484 21.3822 x 22 x 15mm 20 08490 4.5728 x 28 x 15mm 10 08492 19.6728 x 28 x 22mm 10 08494 20.9535 x 35 x 15mm 1 08496 52.9035 x 35 x 22mm 1 08497 40.9435 x 35 x 28mm 1 08498 50.1942 x 42 x 15mm 1 08499 108.8942 x 42 x 22mm 1 08500 87.9642 x 42 x 28mm 1 08501 99.8142 x 42 x 35mm 1 08502 113.6354 x 54 x 15mm 1 08503 183.9354 x 54 x 22mm 1 08504 174.1854 x 54 x 28mm 1 08505 174.9454 x 54 x 35mm 1 08506 182.4454 x 54 x 42mm 1 08507 190.9467 x 67 x 28mm 1 08508 212.27

YP37RSweep Tee, reduced branchAs YP37 but with reduced branch


22 x 22 x 15mm 5 08640 25.5428 x 28 x 15mm 1 08641 43.40

YP50CrossAll ends for copper


15mm 5 08660 35.4422mm 5 08661 39.60

26



YP61Stop EndAll ends for copper tube


8mm 10 08670 6.0210mm 10 08672 5.9912mm 10 08674 7.6315mm 10 08680 3.4422mm 10 08682 6.4528mm 10 08684 11.5135mm 1 08686 26.3342mm 1 08688 45.3654mm 1 08690 63.30

YP65Bent Male Union ConnectorCopper x BSP taper male threadCone joint to BS 1010


15mm x 1/2" 5 08751 27.3122mm x 3/4" 5 08752 35.4928mm x 1" 1 08753 50.7835mm x 11/4" 1 08754 85.9742mm x 11/2" 1 08755 139.74

YP64Bent Union AdaptorCopper x BSP union nutCone joint to BS 1010In appropriate sizes suitable for copper cylinders with male bosses to BS 1010


22mm x 1" 5 08732 21.8228mm x 11/4" 1 08734 32.65

YP63LLong Bent Tap ConnectorCopper x BSP union nutSpigot and washer joint


15mm x 1/2" 5 08724 15.81

YP63Bent Tap ConnectorCopper x BSP union nut Spigot and washer joint


15mm x 1/2" 10 08720 5.3322mm x 3/4" 10 08723 16.33

YP65RBent Boiler UnionCopper x BSP taper male threadCone joint to BS 1010 Reducing boiler union fitting forconnecting primaries to boilers tapped 1" BSP Built up using YP64 and YP71, supplied separately


22mm x 1" 1 08780 42.01

YP68Union AdaptorCopper x BSP union nutCone joint to BS 1010 In appropriate sizes suitable for copper cylinders with male bosses to BS 1010


15mm x 3/4" 10 08783 11.6722mm x 1" 10 08784 16.5628mm x 11/4" 1 08786 26.79

YP68CLUnion AdaptorCopper x BSP union nutCone joint to BS 1010The 15mm x 3/4" size is suitable for connecting 15mm tube to a 3/4" pillar tap


15mm x 3/4" 5 08800 14.5622mm x 1" 5 08801 19.8828mm x 11/4" 1 08802 37.35

YP68FFFlat Faced Union AdaptorCopper x BSP union nutCone joint to BS 1010Suitable for use with water meters


15mm x 3/4" 5 08796 14.4322mm x 1" 5 08797 18.98

YP68MMeter Union ConnectorCopper x BSP union nutSuitable for use with gas meters


22mm x 3/4" 5 08795 13.51

YP69DPStraight Male Union Connector with Dip PipeAs YP69 but with 104mm dip pipe


22mm x 3/4" 1 08825 37.45

YP69Straight Male Union ConnectorCopper x BSP taper male threadCone joint to BS 1010



YP69FStraight Female Union ConnectorCopper x BSP parallel female threadCone joint to BS 1010



YP69PStraight Male Union ConnectorCopper x BSP parallel male threadCone joint to BS 1010


15mm x 1/2" 5 08840 23.2522mm x 3/4" 5 08841 30.1628mm x 1" 1 08842 44.9667mm x 21/2" 1 08850 256.48

YP62Tap ConnectorCopper x BSP union nutSpigot and washer joint


15mm x 1/2" 50 08700 4.6615mm x 3/4" 10 08702 10.4122mm x 1/2" 5 08703 26.7922mm x 3/4" 25 08710 5.37

YP70Male NippleUnion thread x BSP taper male threadCone joint to BS 1010 Enables YP64 and YP68 to be adapted to male union ends


1/2" x 3/8" 5 08871 15.493/4" x 1/2" 5 08872 11.511" x 3/4" 5 08873 13.3411/4" x 1" 1 08874 18.86

YP68CLUnion Adaptor (DZR Nut)Copper x BSP union nut Spigot and washer jointThe 15mm x 3/4" size is suitable for connecting 15mm tube to a 3/4" pillar tap


15mm x 3/4" 5 09035 14.56

YPS Range

27


YP General Range (contd)

YP70PMale NippleUnion thread x BSP parallel male threadCone joint to BS 1010 For use with YP64 and YP68 in providing boiler union fittings suitable for connection to parallel thread cylinder bosses


3/4" x 1/2" 5 08880 11.511" x 3/4" 5 08881 13.34

YP72Female NippleUnion thread x BSP parallel female threadCone joint to BS 1010 Enables YP64 and YP68 to be adapted to female union ends


3/4" x 1/2" 5 08892 11.511" x 3/4" 5 08893 13.3411/4" x 1" 1 08894 18.8611/2" x 11/4" 1 08895 27.902" x 11/2" 1 08896 57.0821/2" x 2" 1 08897 76.26

YP71Male NippleUnion thread x BSP taper male thread, equal endsCone joint to BS 1010


1/2" 10 08885 11.513/4" 5 08886 14.171" 5 08887 19.89

YP115Extension NippleUsed to give extra length to female ends on YP14, YP15, YP30 etc and to extend the tail of pillar taps to BS 1010


1/2" 10 08945 7.493/4" 5 08946 12.72

1481Linear Flow ManifoldCapillary socket inlet x four soft copper tube outlets, Patent No. 1278951 Supplied complete with 8mm Yorkshire couplings


22 x 8mm 2 80050 35.16

1483Linear Flow ManifoldCapillary socket inlet x four soft copper tube outlets, Patent No. 1278951 Supplied complete with 10mm Yorkshire couplings


22 x 10mm 2 80053 45.37

1486Linear Flow ManifoldCapillary socket inlet x six soft copper tube outlets, Patent No. 1278951 Supplied complete with 8mm Yorkshire couplings


28 x 8mm 2 80060 50.55

Heating Components – Manifolds

1491Side Entry ManifoldCapillary socket inlet x male end for insertion into fittingx four compression outlets Side entry manifolds are supplied complete with nuts and rings


22 x 8mm 1 80070 40.99

1495Side Entry ManifoldCapillary socket inlet x male end for insertion into fitting x two compression outlets Side entry manifolds aresupplied complete with nuts and rings


22 x 10mm 1 80072 26.77

1496Side Entry ManifoldCapillary socket inlet x male end for insertion into fitting x four compression outlets Side entry manifolds are supplied complete with nuts and rings


22 x 10mm 1 80073 42.76

WM8MicrafoldMetric male copper ends x 10mm compression outlets 8 outlets Internal disc soldered centrally provides flow and return chambers Supplied with nut and rings


22 x 10mm 1 87102 83.36



28 x 10mm 1 87101 121.79



28 x 10mm 1 87100 165.32

1478ACompression NutFor side entry manifolds


8mm 1 83002 1.0610mm 1 83003 2.03

1478BCompression RingFor side entry manifolds


8mm 1 83011 0.6210mm 1 83012 1.06

1478CBlank NutFor blanking off outlets Not required on side entry


8mm 1 83020 1.2210mm 1 83021 2.79

YPS Range

28


WM20Blanking PlugSelf sealing


10mm 1 87155 1.28

WM21Reducing Spacer with OliveAdapts 10mm compression fittings to 8mm tube


10 x 8mm 1 87156 2.33

Heating Components – Manifolds (contd)

Waste Fittings

YP6WReducerAs YP6 but suitable for the shorter socket of waste fittings


35 x 28mm 1 54001 12.7242 x 35mm 1 54002 19.4254 x 35mm 1 54003 33.3854 x 42mm 1 54004 33.38

YP62WWaste ConnectorFor connecting copper waste pipe to screwed outlet of hand basins, sinks etc where traps are not used


35mm x 11/4" 1 54006 36.64

YP323Copper Bend, 91.5°Copper x copper


35mm 1 54033 40.3742mm 1 54034 67.3754mm 1 54035 100.52

YP359Pitcher Tee, 88.5°Equal endsBranch for connection to outlet of trap tee


35mm 1 54055 58.2242mm 1 54056 86.5154mm 1 54057 119.13

YP359RPitcher Tee, 88.5°Equal endsBranch reduced, for connection to outlet of trap tee


42 x 42 x 35mm 1 54058 86.5154 x 54 x 35mm 1 54060 124.7854 x 54 x 42mm 1 54059 124.78

YP363Pitcher Tee, 88.5°With screwed cleaning plugBranch for connection to outlet of trap tee


35mm 1 54067 65.3342mm 1 54068 96.2554mm 1 54069 138.63

YP363RPitcher Tee, 88.5°Branch reduced for connection to outlet of trap tee


42 x 42 x 35mm 1 54070 96.2754 x 54 x 35mm 1 54071 138.5954 x 54 x 42mm 1 54072 138.59

Waste Fittings (contd)

YP2001Copper P Trap, 85° outlet38mm (11/2") seal generally adjustable to BS 1184 Adjustable for depth and direction of outlet


35mm x 11/4" 1 54201 51.6042mm x 11/2" 1 54202 76.35

YP2002Copper P Trap, 85° outlet76mm (3") seal generally to BS 1184 Adjustable for depth and direction of outlet


35mm x 11/4" 1 54205 55.5542mm x 11/2" 1 54206 79.16

Stopvalves

YP501StopvalveCopper x copperWith gunmetal body and brass headwork


15mm 5 05269 13.9722mm 1 05270 26.0828mm 2 05271 74.15

YP501DZRAll DZR StopvalveCopper x copperThe body and all parts in contact with water are made from material resistant to dezincification


15mm 5 05302 35.0622mm 2 05303 60.7428mm 2 05304 101.22

YP501GMGunmetal StopvalveCopper x copperThe body and all parts in contact with water are made from gunmetal


35mm 1 05305 158.7642mm 1 05306 210.8454mm 1 05307 314.93

YP508Double Union StopvalveCopper x copperWith gunmetal body and brass headwork


15mm 5 05441 45.2322mm 2 05442 63.61

29


YP415GMGate ValveCopper x copperThe body and all parts in contact with water are made from gunmetal To BS 5154/B Yorkshire capillary ends16 bar - 20°C : 6 bar - 110°CSIZE BOX QTY CODE £ EACH

15mm 5 05934 43.7322mm 5 05935 50.6328mm 2 05936 70.5235mm 2 05937 157.2742mm 2 05938 196.6754mm 1 05939 285.31

Gate Valves

YP415GMLSAll Gunmetal Lockshield Gate ValveCopper x copperThe body and all parts in contact with water are made from gunmetal To BS 5154/B Yorkshire capillary ends As YP415GM but with lockshieldSIZE BOX QTY CODE £ EACH

15mm 5 05940 45.2322mm 5 05941 52.8028mm 2 05942 82.1035mm 2 05943 158.7642mm 2 05944 196.6754mm 1 05945 285.31

YP202Nited PlugcockCopper x copperOblong bore suitable for low pressure gas services


15mm 5 55201 32.14

YP205Nited Union PlugcockCopper x copperOblong bore suitable for low pressure gas services


15mm 5 55218 37.26

YP203Nited Plugcock with DropheadCopper x copperOblong bore suitable for low pressure gas services


15mm 5 55207 36.49

Plugcocks

Clips and Brackets

101Saddle BandCopper strip


15mm 100 71004 0.4022mm 100 71005 0.40

107MMetric Single Pipe RingBright dipped finish 67mm, 76mm and 108mm sizes are supplied as polished castingsTapped 10mm and suitable for all ring sizes


15mm tapped 10mm 100 72602 7.3522mm tapped 10mm 100 72603 7.91

110Hospital BracketBright dipped finish


15mm 25 72536 10.5422mm 25 72537 11.1028mm 10 72538 13.61

111MMetric Male BackplateFor use with pipe rings 107M and 107D Tapped 10mm and suitable for all ring sizes


12-108mm 1 72621 4.13

111MCPMetric Male BackplateFor use with pipe rings 107M Tapped 10mm and suitable for all ring sizesPolished Chrome Plate finish


12-108mm 1 72621CP 9.71

116MMetric Female BackplateFor use with pipe rings 107M and 107DM. Tapped 10mm and suitable for all ring sizes


12-108mm 1 72622 4.64

SPJSingle Pipe Joist ClipTwo-part clip, comprising a zintec plate and polypropylene body designed to protect pipework, reduce vibration and maintain joist strengthSIZE BOX QTY CODE £ EACH

15mm 50 72640 2.1322mm 50 72641 2.13


15mm 50 72642 2.9622mm 50 72643 2.96

DPJDouble Pipe Joist ClipTwo-part clip, comprising a zintec plate and polypropylene body designed to protect pipework, reduce vibration and maintain joist strength

110CPHospital BracketPolished Chrome Plate finish


15mm 1 72536CP 24.7922mm 1 72537CP 26.0928mm 1 72538CP 31.94

210


YP1CPStraight CouplingCopper x copper


22mm 10 08021 5.72

YP6CPReducerLarger male end for insertion into fitting x female copper


22 x 15mm 1 08201 8.1928 x 15mm 1 08203 16.9128 x 22mm 5 08205 7.45

YP12CPElbowCopper x copper


15mm 10 08281 4.2022mm 10 08291 10.0128mm 1 08301 21.98

Chrome Plated

YP24CPEqual TeeAll ends for copper


15mm 10 08451 7.4722mm 5 08461 22.8828mm 5 08463 33.94

YP25CPTee, Reduced BranchAll ends for copper


22 x 22 x 15mm 5 08491 18.75

YP26CPTee, one end reducedAll ends for copper


22 x 15 x 22mm 1 08511 34.25

YP27CPTee, one end and brand reducedAll ends for copper


22 x 15 x 15mm 5 08531 28.74

YP62CPStraight Tap ConnectorCopper x union nutSpigot and washer joint


15mm x 1/4" 5 08701 16.93

YP63CPBent Tap ConnectorCopper x union nutSpigot and washer joint


15mm x 1/2" 1 08721 18.96

YPS Range – Polished Chrome

YP General Range – Polished Chrome

YP1Straight CouplingCopper x copper


28mm 1 08030CP 7.49

YP2Adaptor CouplingStraight female connector Copper x BSP parallel female thread


15mm x 1/2" 1 08090CP 18.46

YP3Straight Male ConnectorCopper x BSP taper male thread


28mm x 1" 1 08118CP 45.25

YP12SStreet ElbowFemale copper x male copper for insertion into fitting


22 x 15mm 1 08318CP 4.68

YP12ElbowCopper x copper


15mm 1 08280CP 2.3522mm 1 08290CP 6.1428mm 1 08300CP 11.9835mm 1 08302CP 54.1642mm 1 08304CP 89.51

YP21Obtuse ElbowCopper x copper


35mm 1 08416CP 81.74

YP25Tee, reduced branchAll ends for copper


22 x 22 x 15mm 1 08490CP 11.2628 x 28 x 15mm 1 08492CP 46.2428 x 28 x 22mm 1 08494CP 49.23

YP24Equal TeeAll ends for copper


15mm 1 08450CP 4.45

211


Accessories

FW1Tap Connector WashersAlso suitable for Kuterlite and Endex tap connectorsSIZE PACK QTY CODE £ EACH

3/8" 100 71220 0.241/2" 100 73050 0.243/4" 100 73051 0.27

FW2Union Connector Washers


3/4" 100 71310 0.271" 100 71223 0.2911/4" 50 71311 0.30

WEI

GH

T W

HEN

PAC

KED

130Yorkshire FluxNot for gas installationsSafety Data Sheet for this product is available on our website


100g carton 1 70212 10.72500g carton 1 70213 23.03

131Traditional Craftsman’s FluxSuitable for gas installationsSafety Data Sheet for this product is available on our websiteSIZE BOX QTY CODE £ EACH

100g carton 1 70214 7.86500g carton 1 70215 20.80

Easy Flow FluxGrease based fluxSafety Data Sheet for this product is available on our website


250g carton 1 21066 44.53

145Cleaning PadsHighly abrasive synthetic cleaning pad for cleaning tube ends and bores of Yorkshire and Endex fittings


Pack of 2 1 71070 11.16

146Steel WoolHighly abrasive synthetic cleaning pad for cleaning tube ends and bores of Yorkshire and Endex fittings


450g/1lb pack 1 21060 13.9116 pad pack 1 71060 14.76

CM4Heat Resistant MatCeramic fibre heat resistant mat


300mm x 250mm 1 21063 44.01

SK23 Ended KeyFor lockshield stopvalves


15 - 28mm 1 73190 14.22

SK33 Ended KeyFor lockshield stopvalves


35 - 54mm 1 73191 23.75

VK33 Ended KeyFor lockshield stop valves


15 - 54mm 1 71544 17.14

450Brass PlugHexagonal headBSP parallel male threadSIZE BOX QTY CODE £ EACH

1/8" 1 72625 4.641/4" 1 72626 4.643/8" 1 72627 5.27

450DZRDZR PlugSquare headBSP parallel male threadSIZE BOX QTY CODE £ EACH

1/2" 1 72628 9.833/4" 1 72629 11.501" 1 72630 14.06

456DZRDZR BacknutBSP thread with flange


1/2" 1 70102 3.473/4" 1 70103 4.07

464DZRHexagonal DZR BushScrewed inside and outsideBSP taper male threadSIZE BOX QTY CODE £ EACH

1/2" x 1/4" 1 72696 6.001/2" x 3/8" 1 72697 4.643/4" x 1/2" 1 72700 6.001" x 1/2" 1 72702 10.491" x 3/4" 1 72703 8.2611/4" x 1" 1 72706 16.45

470DZRBlank DZR Hexagonal NutBSP threadSupplied with a washerSIZE BOX QTY CODE £ EACH

1/2" 25 70171 4.643/4" 25 70172 5.271" 25 70173 7.52

472Hexagonal Brass NutBSP threadSuitable for use on union fittings in place of standard octagonal nut in appropriate sizesSIZE BOX QTY CODE £ EACH

3/4" 25 70013 4.7611/2" 10 70016 13.242" 5 70017 19.3021/2" 5 70018 30.20

Sundries

212


1GHDStraight CouplingCopper x copper


8mm 10 56002 11.1712mm 10 56004 8.1615mm 10 56005 7.4522mm 10 56007 11.9328mm 10 56008 16.9135mm 1 56009 30.9142mm 1 56010 33.7854mm 1 56011 49.72

1RGHDReducing CouplingCopper x copper


15 x 8mm 10 56032 14.0215 x 12mm 10 56034 14.0222 x 15mm 10 56038 16.2428 x 22mm 1 56042 22.40

2GHDStraight Female ConnectorCopper x BSP parallel female threadSIZE BOX QTY CODE £ EACH

8mm x 1/4" 10 56081 15.5915mm x 1/2" 10 56084 18.3122mm x 3/4" 10 56086 20.6428mm x 1" 5 56087 30.43

3GHDStraight Male ConnectorCopper x BSP taper male threadSIZE BOX QTY CODE £ EACH

8mm x 1/4" 10 56102 14.9115mm x 1/2" 10 56105 17.8122mm x 3/4" 5 56107 20.6428mm x 1" 1 56108 30.4342mm x 11/2" 1 56110 61.6554mm x 2" 1 56111 100.16

6GHDReducerLarger end male copper for insertion into fitting x female copper


8 x 6mm 5 56134 10.1512 x 8mm 5 56137 10.1515 x 8mm 10 56140 9.1915 x 12mm 10 56142 9.1922 x 15mm 10 56147 8.9928 x 15mm 10 56150 16.2428 x 22mm 10 56152 16.2435 x 28mm 1 56156 21.4242 x 28mm 10 56160 27.9442 x 35mm 1 56161 27.6054 x 28mm 1 56163 44.5254 x 42mm 1 56165 44.52

GHD Fittings

11GHDUnion couplingCopper x copper


8mm 10 56249 29.6712mm 10 56251 29.6715mm 10 56252 33.5222mm 5 56254 42.9028mm 1 56255 59.5335mm 1 56256 107.8442mm 1 56257 127.03

12GHDElbowCopper x copper



24GHDEqual TeeAll ends for copper



61GHDStop EndFor use on copper tube


15mm 10 56470 16.24

64GHDBent Union AdaptorCopper x BSP union nutRound-nose to cone joint


8mm x 3/8" 10 56485 39.3712mm x 1/2" 10 56487 42.9015mm x 3/4" 10 56488 38.6722mm x 1" 5 56490 52.1728mm x 11/4" 1 56491 72.89

65GHDBent Male Union ConnectorCopper x BSP taper male threadRound-nose to cone joint


15mm x 1/2" 5 56510 49.9922mm x 3/4" 5 56512 67.3728mm x 1" 1 56513 122.41

68GHDStraight Union AdaptorCopper x BSP union nutRound-nose to cone joint


8mm x 3/8" 10 56536 13.5312mm x 1/2" 10 56538 14.8715mm x 3/4" 10 56539 14.8722mm x 1" 5 56541 20.1328mm x 11/4" 1 56542 27.6035mm x 11/2" 1 56543 50.03

69GHDStraight Male Union ConnectorCopper x BSP taper male threadRound-nose to cone joint


8mm x 1/4" 10 56558 21.3712mm x 3/8" 5 56560 22.5715mm x 1/2" 5 56561 26.3022mm x 3/4" 5 56563 35.3328mm x 1" 1 56564 78.7735mm x 11/4" 1 56565 104.1842mm x 11/2" 1 56566 125.16

70GHDMale Hexagon NippleBSP union thread x BSP taper male thread 60º cone


3/8" x 1/4" 5 56597 7.841/2" x 3/8" 10 56598 7.793/4" x 1/2" 5 56599 11.391" x 3/4" 5 56600 15.1811/4" x 1" 1 56601 54.14

70PGHDMale Hexagon NippleBSP union thread x BSP parallel male thread 60° cone


3/8" x 1/4" 10 56611 7.841/2" x 3/8" 5 56612 7.793/4" x 1/2" 10 56613 11.391" x 3/4" 5 56614 15.1811/4" x 1" 1 56615 54.14

213


GHD Accessories

130GHDHigh Duty FluxReady mix paste


500g tub 1 21068 44.53

N166Silver Alloy Brazing RodsTo BS EN 1044 AG14 (formerly BS 1845)


3mm x 600mm 1 71175 Refer to Endex price list

1GHDStraight CouplingCopper x copper


15mm 1 56005DW 9.3122mm 1 56007DW 14.9028mm 1 56008DW 21.1335mm 1 56009DW 33.9942mm 1 56010DW 37.15

GHD Fittings Degreased

1RGHDReducing CouplingCopper x copper


22 x 15mm 1 56038DW 20.31

3GHDStraight Male ConnectorCopper x BSP taper male threadSIZE BOX QTY CODE £ EACH

15mm x 1/2" 1 56105DW 22.2742mm x 11/2" 1 56110DW 67.80

6GHDReducerLarger end male copper for insertion into fitting x female copper


8 x 6mm 1 56134DW 12.6815 x 8mm 1 56140DW 11.5115 x 12mm 1 56142DW 11.5122 x 15mm 1 56147DW 11.2728 x 15mm 1 56150DW 20.3128 x 22mm 1 56152DW 20.3142 x 28mm 1 56160DW 30.7242 x 35mm 1 56161DW 30.3454 x 28mm 1 56163DW 48.9754 x 42mm 1 56165DW 48.97

11GHDUnion couplingCopper x copper


15mm 1 56252DW 41.9128mm 1 56255DW 74.42

12GHDElbowCopper x copper



24GHDEqual TeeAll ends for copper



68GHDStraight Union AdaptorCopper x BSP union nutRound-nose to cone joint


15mm x 3/4" 1 56539DW 18.62

69GHDStraight Male Union ConnectorCopper x BSP taper male threadRound-nose to cone joint


15mm x 1/2" 1 56561DW 32.8828mm x 1" 1 56564DW 98.4542mm x 11/2" 1 56566DW 137.65

214


Notes

1. GeneralIn these conditions, reference to the Company shall mean Pegler Yorkshire. All quotations are made and all orders are accepted subject to these conditions. All other terms, conditions or warranties whatsoever are excluded from the contract or any variation thereof unless expressly accepted by the Company in writing. In the event of a conflict between these conditions and the specific terms and conditions of quotation then the latter shall prevail.

2. Electronic Tradinga) If the Company and Buyer agree that electronic trading between them shall be a basis for order processing and invoicing then the Standard Interchange Agreement (1st Edition March 1989) of the EDI Association shall be incorporated into the contract by reference subject to these conditions. b) Electronic orders shall be valid if all the information agreed between the Buyer and the Company as being required is properly set out in the agreed format and the order is transmitted by the Buyer to the Company by reference to the correct identification code and is received by the Company when collecting its electronic mail from the relevant system. c) Each valid electronic order will be deemed accepted by the Company unless the Company communicates rejection of the order to the Buyer by electronic or other means (including telephone) within 24 hours of receipt. Acceptance of an order shall constitute a contract for sale and purchase to which these conditions and the Standard Interchange Agreement shall prevail. d) If the Company and the Buyer agree that invoicing may be done by electronic mail, then payment will be due 30 days after the date of electronic invoice unless agreed otherwise.

3. DeliveryAny date for delivery named by the Company is an estimate only and in no circumstances shall the failure of the Company to deliver on or before the named date either entitle the Buyer to rescind or terminate the contract or make the Company liable in any way for the consequences of any delay.

4. ExportUnless specifically stated otherwise in these conditions all trade terms not specifically covered by these conditions shall be interpreted in accordance with INCOTERMS current on the date of that order.

5. Warranty and Defective Goodsa) Save as otherwise provided by the other conditions of these Conditions, sections 12 to 15 of the Sale of Goods Act 1979 are to be implied into this contract. b) The goods delivered under the Contract shall, where the Contract includes a specification, comply with the specification or, if there is no specification, shall be of normal industrial quality. c) The Buyer does not rely on any statement or representations other than those which have been made in writing by the Company. d) The Buyer must give the Company immediate written notice of any defect in the goods. Such goods shall be returned to the Company and if proved to have been defective at delivery as a result of faulty materials or workmanship, the Company shall at its option replace or repair such goods. Defects in quality or dimension in any delivery shall not be ground for cancellation of the remainder of the order. e) Save for any liability for death or personal injury caused by the Company’s negligence, the Company’s liability in connection with defective goods shall be limited to the repair

or supply of a replacement for the defective goods, and the Company shall not be liable for any other loss or damage including, but not limited to loss of profit, labour costs, damage to property, wasted expenditure or cost of mitigation.

6. Data and Technical InformationThe information contained in the advertising sales and technical literature issued by the Company may be relied upon to be accurate in the exact circumstances in which it is expressed. Any illustrations, performance details, examples of illustrations and methods of assembly and all other technical data in such literature are based on experience and upon trials under test conditions and are provided for general guidance only.

7. Claims For Damage, Shortage or LossNo claim for damage in transit or shortage of delivery can be accepted unless, a separate notice in writing is given to the carrier concerned and to the Company within three days of receipt of the goods, followed by a complete claim in writing within five days of receipt of the goods. No claim for loss of goods in transit can b accepted unless a separate notice in writing is given to the carrier concerned and to the Company, and a complete claim in writing made within 21 days of the date of consignment. Where goods are accepted from the carrier concerned without being checked, the delivery book of the carrier must be signed “not examined”. If a complaint is not made to the Company as herein provided, the products shall be deemed to be in all respects in accordance with the Contract, and the Buyer shall be bound to pay for the same accordingly.

8. Suspension of Deliveriesa) Deliveries may be wholly or partially suspended by the company in the event of:- i. Stoppage, delay or interruption caused to the business of the Company as a result of strikes, lockouts, trade disputes, breakdown, accident or any cause whatsoever beyond the reasonable control of the Company. ii. Any default by the Buyer in making payment of any amounts owed to the Company under this and any other contracts between them. b) In the event of any hostilities (whether war is declared or not) in which Great Britain is involved, or in the event of national emergency, or if the Company’s works should become either directly or indirectly engaged on Government orders as to prevent or delay work on other orders, the Company shall be entitled at any time, on notice to the Buyer, to make partial deliveries only or to determine the contract without prejudice in any case to rights accrued in respect of deliveries already made.

9. Determination of ContractThe Company shall have the right forthwith to determine this and/or any other Contract between the Buyer and the Company by written notice to the Buyer’s last known address (without prejudice to any claim or right the Company might otherwise make or exercise) in any of the following events:- a) If the Buyer shall make default in or commit a breach of any contract with the Company; or b) If any distress or execution shall be levied upon the Buyer’s property or assets; or c) If the Buyer shall make or offer to make any arrangements or composition with creditors, or commit any act of bankruptcy or become insolvent; or d) If any petition or receiving order in bankruptcy shall be presented or made against him; or e) If the buyer shall be a limited Company and become subject of any resolution or petition for winding up or administration; or

f) If a receiver or manager of the Buyer’s undertaking, property or assets or any part thereof shall be appointed.

10. IndemnityThe Buyer will indemnify the Company against all damages, penalties, costs and expenses to which the Company may become liable as a result of work done to the Buyer’s instructions or which infringe any letters, patent or registered design or copyright or any other third party intellectual property rights.

11. PricesThe price payable for the goods shall unless otherwise agreed be the Company’s list price current at the date of despatch. Such prices are inclusive of delivery to the Buyer’s UK mainland delivery point but costs of delivery to any other destinations will be charged to the Buyer.

12. Risk and Titlea) Risk shall pass to the Buyer so that the Buyer is responsible for all loss, damage or deterioration to the goods: i. If the Company delivers the goods by its own transport at the time when the goods or a relevant part thereof arrive at the place of delivery; or ii. In all other circumstances at the time when the goods, or a relevant part thereof leave the premises of the Company whether or not the Company arranges transport and (without prejudice to clause 7) where the goods are delivered by carrier, any claims for loss or damage in transit must be made by the Buyer against the carrier in accordance with the carrier’s conditions. b) Title to the goods supplied under the contract shall only pass to the Buyer when payment in full for all goods supplied under this and all other contracts between the Company and the Buyer has been received by the Company. The Company reserves the immediate right to possession of and at any time may recover all goods in respect of which title has not passed to the Buyer; the Company is hereby authorised by the Buyer to enter upon any premises where such goods are held by or on behalf of the Buyer and recover possession thereof. c) Until title to goods has been passed to the Buyer pursuant to these conditions it shall possess the goods as a Bailee at will of the Company, and the Buyer shall not be entitled to sell or otherwise deal in goods in respect of which title has not passed to the Buyer. If the Buyer acts in breach of these conditions then without prejudice to any other rights of the Company the Buyer shall have a fiduciary duty to account to the Company for the proceeds of any sale save to the extent that any such proceeds exceed the amounts owed to the Company under this and all other contracts between the Company and the Buyer.

13. CancellationCancellation will only be accepted by the Company on condition that all costs and expenses incurred by the Company up to the time of cancellation and all loss of profits and other loss or damage suffered by the Company as a result of such cancellation will be paid forthwith by the Buyer to the Company.

14. Payment of Accountsa) Unless otherwise agreed by the Company in writing, payment shall be settled in full by the last working day of the month following the month in which the goods were despatched, or would have been despatched save for postponement otherwise than due to default on the part of the Company. The Company shall be entitled to submit its invoice on the same day as its delivery advice note or at any time thereafter, save that where delivery

has been postponed at the request of or the default of the Buyer, then the Company may submit its invoice at any time after the goods are ready for delivery or would have been ready in the ordinary course but for the request or default as aforesaid.b) The Company reserves the right to charge interest at a rate up to 5% above Lloyds Bank Base Lending Rate ruling at the time payment is due if payment is not made in accordance with the terms agreed at the time the order is accepted.

15. VATThe prices quoted are exclusive of VAT which will, if applicable, be added to the invoice at the rate then current.

16. Consumer Protection ActIn circumstances where the Company supplies parts or goods to the Buyer for incorporation with, or use ancillary to, any composite goods to be produced, manufactured, processed or supplied by the Buyer then: a) The Buyer shall forthwith on demand produce for inspection by the Company copies of all written instructions, information and warnings in relation to the said composite goods, provided nevertheless that such inspection or right to inspect shall not of itself constitute acceptance or approval on the part of the Company of such instructions, information, or warnings; and b) The Buyer shall indemnify, reimburse and compensate the Company for all losses and damages (including costs, expenses and charges for legal actions in which the Company may be involved) that the Company may incur in the event that any claim or claims are made against the Company pursuant to the Act relating to the said composite goods of the Buyer or parts or goods supplied hereunder in circumstances in which the parts or goods supplied by the Company was either: i. Not the defective part of the said composite goods; or ii. Was only rendered the defective part or became defective goods by reason of actions or omission of the Buyer; or iii. Was only rendered the defective part or became defective goods by reason of instructions or warnings given or omitted by the Buyer or other supplier of the said composite goods supplied hereunder. c) For the purposes of this condition the word “defective” shall be interpreted in accordance with the definition contained in the Act and this condition shall mutatis mutandis apply in relation to equivalent legislation of other states as it applies in relation to the Act.

17. Law and JurisdictionThis contract shall be governed and construed according to the Law of England and the parties hereby agree to submit to the exclusive jurisdiction of the English courts.

PEGLER YORKSHIREYORKSHIRE PRICE LISTTERMS AND CONDITIONS

215

UK ENQUIRIES

UK SALES Free Phone: 0800 156 0010 Free Fax: 0808 156 1011 Email: [email protected]

TECHNICAL HELP Free Phone: 0800 156 0050 Free Fax: 0808 156 1012 Email: [email protected]

BROCHURE HOTLINE Free Phone: 0800 156 0020 Free Fax: 0808 156 1011 Email: [email protected]

INTERNATIONAL ENQUIRIES

EXPORT Tel: +44 (0) 1302 855 656 Fax: +44 (0) 1302 730 513 Email: [email protected]

Follow us on

Registered in England Company No. 00401507

All brand names and logo styles are registered trademarks. Maintaining a policy of continual product development, Pegler Yorkshire reserves the right to change specifications, design and materials of products listed in this publication without prior notice

HEAD OFFICE

Pegler Yorkshire Group Limited St. Catherine’s Avenue, Doncaster, South Yorkshire DN4 8DF, England

Tel: +44 (0) 844 243 4400 Fax: +44 (0) 844 243 9870 Email: [email protected]

www.pegleryorkshire.co.uk LIT.REF: WEB ONLY

Documents

PRICE LIST Yorkshire · PEGLER YORKSHIRE YORKSHIRE PRICE LIST CONTENTS Solder Ring Solutions YPS and YP General Range 3-8 Heating Components – Manifolds 7-9 Waste Fittings 8 Stopvalves