Price List

Pr i ce L i s t

Glenfield Valves Limited

2014

Glenfield.79677.c_Layout 1 06/05/2014 08:21 Page 1

2

Glenfield, Clearly theWorld’s Best


3

Glenfield/AVK - Supplier of HighQuality Products


4

Table of content Price list 2014

Gate Valves

Butterfly Valves

Check Valves

Air Valves

Series 21 Resilient Seat Gate Valve 6 DN50 - 400

Series 37 Metal Seated Gate Valve 6 - 8 DN50 - 300 KS, GS, DIN/PN16, PN25

Series 08 Hand Wheel 8 To suit Series 21/37 DN50 - 400

Series 08 Stem Cap 9 To suit Series 21/37 DN50 - 400

Series 54 Metal Seated Gate Valve 9 - 29 DN350 - DN1800 KS, GS, DIN/PN10, PN16, Shoes & Channels, Bypass, Non-Rising Stem, Rising Stem, Parallel Face, AWWA, Australian Spec

Series 41 Metal Seated Check Valve 29 - 32 DN50 - 600 KS, GS, DIN/PN16, Free End, Lever, Weight & Guard

Series 641 Metal Seated Swing Check Valves 33 - 34 DN700 - 1000 KS, GS, DIN/PN16, Free End, Lever, Weight & Guard

Series 641 Recoil Non Slam Metal Seated Check Valve 34-36 DN100 - 1400 GS, DIN/PN16, Free End, Lever, Weight & Guard

Series 851 APEX Dual Function Air Valve 36 - 39 DN 50-150 KS, PN16/PN25, Vent Non-Return (VNR), In-Flow Check Valve (ICV)

Series 851 EPEX Dual Function Air Valve 39 DN80

Series 851 Cluster Valve 40

Series 756 Butterfly Valve 40 - 48 DN200 - 2200 KS, GS, PN10, PN16, PN25, Integral Seat, Stainless Seat, Short Pattern, Long Pattern


Table of content Price list 2014

5

Series 910 Y Strainer 48

Series 859 Automatic Control Valve 49 - 51

Series 853 Automatic Control Valve 52 DN350 - 800 Pressure Reducing, Pressure Sustaining/Relief, Constant Flow

Series 856 Submerged Discharge Valve 53 DN200 - 1800 Glenfield Design/PN16

Series 857 Free Discharge Valve 53 DN200 - 2200 (Fixed Cone) Glenfield Design/PN16

Series 855 Inline Throttling Valve 54 DN200 - 1000 Glenfield Design/PN16

Underground Hydrants

Specialist Control Valves

Float Valves

Additional

Gearbox/Actuator Selection 56 Gate Valves: Manual/Electric Operator Sizing Guide 57 - 58 Butterfly Valves: Manual/Electric Operator Sizing Guide 59 - 61Accessories for Valves 62Standards 63Terms and Conditions of Sale 64 - 66Contacts 67

All Products are categorized into delivery codes.A : Up to max 2 weeks B : Up to max 8 weeks C : To be confirmed

All Classification Codes are subject to Volumes required and confirmation of specific lead-time at time of order confirmation.

Series 29 Underground Fire Hydrant 55 DN80 Squat Type KS/PN16

Series 854 Float Valve 54-55 DN50 - 500 PN16, Pressure Operated, Equilibrium Type


6

Price list 2014

AVK ref. DN PN Weight Units Delivery Grossnumber mm class kg pr. Pallet code Price GBP

21-050-80-0141342 50 16 14 25 C 731.12

21-065-80-0141342 65 16 15 22 C 741.19

21-080-80-0141342 80 16 18 22 C 764.60

21-100-80-0141342 100 16 27 18 C 889.30

21-150-80-0141342 150 16 51 12 C 2,016.70

21-200-80-0141342 200 16 81 6 C 1,685.50

21-250-80-0141342 250 16 132 6 C 2,396.16

21-300-80-0141342 300 16 177 4 C 3,281.56

21-350-80-0141342 350 16 271 2 C 6,211.18

21-400-80-0141342 400 16 274 2 C 6,652.85

Series 21/80 For Salt WaterResilient Seat Gate ValveEN 1074-2 / BS 5163-1Ductile Iron Body EPDMRubber wedge WRASapproved Standard FlangeDrilling to PN16EN 1092-2 (ISO 7005-2)Werkst. 4401 (AISI 316) StemA4 Bonnet bolts Epoxy coated according to DIN 30677-2 and GSK ApprovedClosing direction: CTCDN50-400


37-050-50-210001 50 16 11 25 C 456.96

37-065-50-210001 65 16 13 25 C 497.95

37-080-50-210001 80 16 21 22 C 545.89

37-100-50-210001 100 16 27 18 C 637.41

37-125-50-210001 125 16 38 12 C 706.55

37-150-50-210001 150 16 43 12 C 1,041.61

37-200-50-210001 200 16 76 6 C 1,734.63

37-250-50-210001 250 16 105 6 C 2,431.05

37-300-50-210001 300 16 159 2 C 3,335.23

Series 37\50 (Replaces S37/40)Metal seated Gate ValveFlange drilling to PN16 EN1092-2Face to face BS5163\EN558-1series 3Ductile Iron Body, bonnet, wedge,Stainless Steel 1.4021(AISI420)StemZinc plated mild steel FastenersGunmetal(LG2) TrimEpoxy coated according to DIN30677-2 and GSK ApprovedClosing: Clockwise to close (CTC)


37-050-50-21013110 50 16 11 25 C 529.03

37-065-50-21013110 65 16 13 25 C 574.53

37-080-50-21013110 80 16 21 22 C 624.66

37-100-50-21013110 100 16 27 18 C 729.68

37-125-50-21013110 125 16 38 12 C 815.23

37-150-50-21013110 150 16 43 12 C 1,215.49

37-200-50-21013110 200 16 76 6 C 1,959.32

37-250-50-21013110 250 16 105 6 C 2,714.83

37-300-50-21013110 300 16 159 2 C 3,670.91

Series 37\50Metal seated Gate ValveFlange drilling to EN1092-2Face to face BS5163\EN558-1 series 3,Ductile IronBody, bonnet, wedge,Stainless Steel Grade 316 S11StemStainless steel A4 FastenersGunmetal(LG2) TrimEpoxy coated according to DIN 30677-2 and GSK ApprovedClosing: Clockwise to close (CTC)


37-050-51-010001 Mtg Stool F10 50 16 17 25 C 541.47

37-080-51-010001 Mtg Stool F10 80 16 21 22 C 621.56

37-100-51-010001 Mtg Stool F10 100 16 26 18 C 744.32

37-150-51-010001 Mtg Stool F10 150 16 43 12 C 1,157.83

37-200-51-010001 Mtg Stool F10/F14 200 16 76 6 C 1,902.12

37-250-51-010001 Mtg Stool F10/F14 250 16 107 6 C 2,618.88

37-300-51-010001 Mtg Stool F10/F14 300 16 164 2 C 3,804.27

Series 37\51 (Replaces S37/41)Metal seated Gate ValveWith ISO Top flange Flange drilling to PN16 EN1092-2Face to face BS5163\EN558-1 series 3Ductile Iron Body, bonnet, wedge Stainless Steel SS316 StemWedge Nut Aluminium Bronze(CC331G)8.8 zinc plated FastenersGunmetal(LG2) TrimEpoxy coated according to DIN 30677-2 and GSKApprovedClosing: Clockwise to close (CTC)


7

Gate valves

Price list 2014


37-050-51-01013110 Mtg Stool F10 50 16 17 25 C 704.43

37-080-51-01013110 Mtg Stool F10 80 16 21 22 C 792.82

37-100-51-01013110 Mtg Stool F10 100 16 26 18 C 806.29

37-150-51-01013110 Mtg Stool F10 150 16 43 12 C 1,254.22

37-200-51-01013110 Mtg Stool F10/F14 200 16 76 6 C 2,060.51

37-250-51-01013110 Mtg Stool F10/F14 250 16 107 6 C 2,836.93

37-300-51-01013110 Mtg Stool F10/F14 300 16 164 2 C 4,004.50

Series 37\51 (Replaces S37/41) GULF SPECMetal seated Gate ValveWith ISO Top flange Flange drilling to PN16 EN1092-2Face to face BS5163\EN558-1 series 3Ductile Iron Body, bonnet, wedge Stainless Steel SS316 StemWedge Nut Aluminium Bronze(CC331G)A4 FastenersGunmetal(LG2) TrimEpoxy coated according to DIN 30677-2 and GSKApproved to 300 MicronsClosing: Clockwise to close (CTC)


37-050-46-61013110 50 16 29 25 C 656.71

37-080-46-61013110 80 16 34 22 C 754.65

37-100-46-61013110 100 16 41 18 C 962.94

37-150-46-61013110 150 16 69 12 C 1,551.95

37-200-46-61013110 200 16 111 4 C 2,634.20

37-250-46-61013110 250 16 171 4 C 4,159.84

37-300-46-61013110 300 16 252 2 C 5,216.26

Series 37\46 Gulf SpecMetal seated Gate ValveRising stem with HandwheelFlange drilling to EN1092-2Face to face BS5163\EN558-1 series 3, Ductile Iron Body, bonnet, wedge Stainless Steel 1.4401 (SS316) Stem, A4 FastenersGunmetal(LG2) TrimWedge Nut Aluminium Bronze (CC331G)Epoxy coated according to 300 MicronsDIN 30677-2 and GSK ApprovedClosing: Clockwise to close (CTC)


37-050-70-26004115 50 16 20 12 C 604.25

37-080-70-26004115 80 16 30 12 C 707.32

37-100-70-26004115 100 16 40 12 C 854.20

37-150-70-26004115 150 16 80 8 C 1,368.32

37-200-70-26004115 200 16 150 2 C 2,214.78

37-250-70-26004115 250 16 195 2 C 3,071.08

37-300-70-26004115 300 16 270 2 C 4,042.87

Series 37\70 (Replaces S37/30) Kuwait SpecMetal seated Gate ValveFlange drilling to BS10 Table EFace to face EN558-1 Series 15, Ductile Iron Body, Bonnet, Wedge Aluminium Bronze CA104 StemWedge Nut Aluminium Bronze(CC331G)Zinc Plated Mild Steel FastenersGunmetal(LG2) TrimFusion Bonded Epoxy CoatedClosing: Clockwise to close (CTC)


37-050-80-6A0001 50 25 22 25 C 490.81

37-080-80-6A0001 80 25 26 22 C 593.41

37-100-80-6A0001 100 25 39 18 C 684.92

37-150-80-6A0001 150 25 70 12 C 1,140.46

37-200-80-6A0001 200 25 110 6 C 1,916.10

37-250-80-6A0001# 250 25 153 6 C 2,664.80

37-300-80-6A0001# 300 25 233 2 C 3,602.05

# Only when unbalance pressure lower than 16 bar adopt handwheel,

otherwise pls refer S37\81.gearbox must be used.

Series 37\80 (new design) South African SpecMetal seated Gate ValveFlange drilling to EN1092-2 PN25Face to face BS5163\EN558-1 series 19,Ductile IronBody, bonnet, wedge,Stainless Steel 1.4021(AISI420) StemZinc plated mild steel FastenersGunmetal(LG2) TrimWedge Nut Aluminium Bronze (CC331G)With HandwheelEpoxy coated according to DIN 30677-2 and GSKApprovedClosing: Clockwise to close (CTC)


8

Price list 2014


37-050-90-67004115 50 25 22 25 C 649.62

37-080-90-67004115 80 25 26 22 C 765.91

37-100-90-67004115 100 25 39 18 C 991.91

37-150-90-67004115 150 25 70 12 C 1,590.14

37-200-90-67004115 200 25 110 6 C 2,790.91

37-250-90-67004115# 250 25 153 6 C TBA

37-300-90-67004115# 300 25 233 2 C TBA

# Only when unbalance pressure lower than 16 bar adopt handwheel,

otherwise pls refer S37\91.gearbox must be used.

Series 37\90(new design)Metal seated Gate ValveFlange drilling to PN25 EN1092-2Face to face EN558-1 Series 15 Ductile Iron Body, bonnet, wedge,Aluminium Bronze CA104Wedge Nut Aluminium Bronze (CC331G) Stem, Zinc plated mild steel FastenersGunmetal(LG2) TrimFusion Bonded Epoxy coated Closing: Clockwise to close (CTC)


37-250-91-67004115 250 25 206 2 C TBA37-300-91-67004115 300 25 273 2 C TBA

Series 37\91(new design)Metal seated Gate ValveFlange drilling to PN25EN1092-2Face to face BS5163\EN558-1 series 15Ductile Iron Body, bonnet,wedgeAluminium Bronze CA104 StemWedge Nut Aluminium Bronze (CC331G)Zinc plated mild steel FastenersGunmetal(LG2) TrimWith ISO Top flange and bevel gear Fusion Bonded Epoxy coated Closing: Clockwise to close (CTC)


0810001000 50-80 3.5 150 C 29.09

0815002000 100 4.5 100 C 40.34

0820001000 150 6 80 C 64.92

0825002000 200-300 11 40 C 84.69

0840001000 350-400 17 30 C 143.28

Series 08 hand wheel hand wheel for S21/S37Handwheel: Grey cast iron,GG-25, to DIN 1691(BS 1452 grade 220/250)Epoxy coated according to DIN 30677-2 and GSKApprovedBolt and washer: Stainlesssteel Gr. A2Close direction: Clockwise to close(CTC)


37-250-81-A70001 250 25 206 2 C 4,336.8837-300-81-A70001 300 25 273 2 C 5,274.14

Series 37\81 (new design) South African SpecMetal seated Gate ValveFlange drilling to EN1092-2PN25Face to face BS5163\EN558-1 series 19,Ductile IronBody, bonnet, wedge,Stainless Steel 1.4021(AISI420)StemZinc plated mild steelFastenersGunmetal(LG2) TrimWedge Nut Aluminium Bronze (CC331G)With ISO Top flange and bevel gear Epoxy coated according to DIN 30677-2 and GSK ApprovedClosing: Clockwise to close (CTC)


9

Price list 2014


0805001000 50 1.5 150 C 16.12

0808002001 65-80 2.0 150 C 22.65

0810001001 100 3.5 150 C 30.03

0815002001 125-150 4.5 100 C 41.30

0820001001 200 6.0 80 C 65.73

0825002001 250-300 11.0 40 C 85.52

0840001001 350-400 17.0 30 C 145.10

Series 08 hand wheel hand wheel for S02/S06Handwheel: Grey cast iron,GG-25, to DIN 1691(BS 1452 grade 220/250)Epoxy coated according to DIN 30677-2 and GSKApprovedBolt and washer(DN65-DN400) Zinc coated steel 8.8(DN50, DN450-DN600) Stainless Steel Gr. A2Close direction: Clockwise to close(CTC)


54-0350-31-1101100 350 16 332 1 C 6,151.82

54-0350-31-0101100 350 10 291 1 C 6,151.82

54-0400-31-1101100 400 16 455 1 C 6,822.85

54-0400-31-0101100 400 10 359 1 C 6,822.85

54-0450-31-1101100 450 16 573 1 C 8,230.35

54-0450-31-0101100 450 10 437 1 C 8,230.36

54-0500-31-1101100 500 16 735 1 C 10,558.47

54-0500-31-0101100 500 10 538 1 C 10,558.47

54-0600-31-1101100 600 16 1050 1 C 13,488.44

54-0600-31-0101100 600 10 708 1 C 13,488.44

54-0700-31-1102100 700 16 2100 1 C 30,464.79

54-0700-31-0101100 700 10 1416 1 C 30,464.79

54-0800-31-1102100 800 16 2100 1 C 37,497.25

54-0800-31-0101100 800 10 1779 1 C 37,497.25

54-0900-31-1103100 900 16 2317 1 C 44,629.41

54-0900-31-0102100 900 10 2317 1 C 44,629.41

Series 54\31Metal seated Gate ValveFlange drilling toEN1092-2 (ISO7005-2) Ductile IronBody, bonnet, wedge,Stainless Steel 1.4057 StemZinc plated mild steel FastenersAluminium Bronze (AB1)Trim (seat rings and face rings): Epoxy coated according to DIN 30677-2 and GSKApprovedClosing: Clockwise to close (CTC)


0810051000 50-100 0.6 300 C 7.43

0815051000 150 0.8 250 C 11.78

0820051000 200-300 1.3 200 C 15.33

0840051000 350-400 2.9 150 C 35.88

Series 08 stem capStem cap for S21/S37bolt top mounted, GG-25Bolts: Stainless Steel A2Coating: StandardClose direction: Clockwiseto close (CTC). White insert


08-040-61000 40/50 0.26 250 C 4.50

08-065-61000 65/80 0.6 200 C 8.20

08-100-61000 100 0.557 150 C 7.38

08-100-61000 125/150 0.557 100 C 7.38

08-200-61000 200 1.2 60 C 12.93

08-250-61000 250/300 1.0 40 C 11.89

08-400-61000 350/400 1.5 30 C 15.84

Series 08 stem cap Stem cap for S02\S06bolt top mounted, GG-25Bolts: Stainless steel A2Epoxy coated according to DIN 30677-2 and GSKApprovedClose direction: Clockwiseto close(CTC), white insert


10

Price list 2014


54-0350-33-1101100 350 16 298 1 C 6,481.74

54-0350-33-0101100 350 10 298 1 C 6,481.74

54-0400-33-1101100 400 16 366 1 C 7,242.50

54-0400-33-0101100 400 10 366 1 C 7,242.50

54-0450-33-1101100 450 16 447 1 C 8,599.62

54-0450-33-0101100 450 10 447 1 C 8,599.62

54-0500-33-1101100 500 16 548 1 C 10,840.07

54-0500-33-0101100 500 10 548 1 C 10,840.07

54-0600-33-1101100 600 16 717 1 C 13,816.36

54-0600-33-0101100 600 10 717 1 C 13,816.36

54-0700-33-1102100 700 16 1440 1 C 31,226.78

54-0700-33-0101100 700 10 1440 1 C 31,226.78

54-0800-33-1102100 800 16 1789 1 C 38,235.37

54-0800-33-0101100 800 10 1789 1 C 38,235.37

54-0900-33-1103100 900 16 2341 1 C 45,531.58

54-0900-33-0102100 900 10 2341 1 C 45,531.58

Series 54\33 BypassMetal seated Gate ValveWith Bypass valveFlange drilling toEN1092-2 (ISO7005-2) Ductile IronBody, bonnet, wedge,Stainless Steel 1.4057 StemZinc plated mild steel FastenersAluminium Bronze (AB1)Trim (seat rings and face rings): Closing: Clockwise to close(CTC)


54-0350-31-1101101 350 16 298 1 C 11,716.72

54-0400-31-1101101 400 16 366 1 C 12,682.84

54-0450-31-1101101 450 16 444 1 C 15,589.06

54-0500-31-1101101 500 16 545 1 C 18,496.22

54-0600-31-1101101 600 16 715 1 C 25,200.93

54-0700-31-1102101 700 16 332 1 C 38,977.57

54-0800-31-1103101 800 16 1779 1 C 47,052.28

54-0900-31-1103101 900 16 2330 1 C 56,767.38

Series 54\31 S&CMetal seated Gate Valveand Shoe & ChannelFlange drilling to EN1092-2 (ISO7005-2) Ductile IronBody, bonnet, wedge,Stainless Steel 1.4057 StemZinc plated mild steel Fasteners ,Aluminium Bronze(AB1)Trim (seat rings and face rings)Closing: Clockwise to close (CTC)


54-0350-33-1101101 350 16 367 1 C 11,975.31

54-0400-33-1101101 400 16 444 1 C 13,110.22

54-0450-33-1101101 450 16 551 1 C 15,850.12

54-0500-33-1101101 500 16 762 1 C 18,979.41

54-0600-33-1101101 600 16 981 1 C 25,566.03

54-0700-33-1102101 700 16 1453 1 C 39,822.73

54-0800-33-1103101 800 16 1802 1 C 48,179.17

54-0900-33-1103101 900 16 3600 1 C 57,894.26

Series 54\33 S&C & BypassMetal seated Gate ValveWith Bypass valve and Shoe & ChannelFlange drilling to EN1092-2 (ISO7005-2) Ductile IronBody, bonnet, wedge,Stainless Steel 1.4057 StemZinc plated mild steel Fasteners ,AluminiumBronze (AB1)Trim (seat rings and facerings)Closing: Clockwise to close (CTC)


11

Gate valves

Price list 2014


54-0350-31-1201200 350 16 291 1 C 6,384.00

54-0350-31-0201200 350 10 291 1 C 6,384.00

54-0400-31-1201200 400 16 359 1 C 7,279.21

54-0400-31-0201200 400 10 359 1 C 7,279.21

54-0450-31-1201200 450 16 437 1 C 8,542.20

54-0450-31-0201200 450 10 437 1 C 8,542.20

54-0500-31-1201200 500 16 538 1 C 10,795.28

54-0500-31-0201200 500 10 538 1 C 10,795.28

54-0600-31-1201200 600 16 708 1 C 13,881.78

54-0600-31-0201200 600 10 708 1 C 13,881.78

54-0700-31-1202200 700 16 1416 1 C 32,008.63

54-0700-31-0201200 700 10 1416 1 C 32,008.63

54-0800-31-1203200 800 16 1766 1 C 38,835.36

54-0800-31-0201200 800 10 1766 1 C 38,835.36

54-0900-31-1203200 900 16 2330 1 C 48,729.27

54-0900-31-0202200 900 10 2330 1 C 48,729.27

Series 54\31 Gulf SpecMetal seated Gate ValveFlange drilling to EN1092-2(ISO7005-2) Ductile Iron Body, bonnet, wedge,SS 1.4401(AISI316) StemA4 FastenersAluminium Bronze (AB1)Trim (seat rings and face rings): Closing: Clockwise to close (CTC)Coating: Fusion Bonded Epoxy to300 Microns

NOTE IF UNBALANCED PRESSURE IS MORETHAN 5 BAR THEN REQUIRE VALVE TO HAVESTAINLESS STEEL GR 1.4057 (431) STEM


54-0350-33-1201200 350 16 298 1 C 6,899.14

54-0400-33-1201200 400 16 366 1 C 7,641.41

54-0450-33-1201200 450 16 447 1 C 8,902.12

54-0500-33-1201200 500 16 548 1 C 11,963.83

54-0600-33-1201200 600 16 717 1 C 15,179.91

54-0700-33-1202200 700 16 1440 1 C 32,758.07

54-0800-33-1203200 800 16 1789 1 C 42,452.29

Series 54/33 Gulf Spec & BypassMetal seated Gate Valve WithBypass ValveFlange drilling to EN1092-2(ISO7005-2) Ductile Iron Body, bonnet, wedge,SS 1.4401(AISI316) StemA4 FastenersAluminium Bronze (AB1)Trim (seat rings and face rings): Closing: Clockwise to close (CTC)Coating: Fusion Bonded Epoxy to300 Microns



54-0350-31-1201203 350 16 298 1 C 7,015.71

54-0400-31-1201203 400 16 366 1 C 7,913.72

54-0450-31-1201203 450 16 447 1 C 9,333.73

54-0500-31-1201203 500 16 548 1 C 11,035.30

54-0600-31-1201203 600 16 717 1 C 13,843.13

54-0700-31-1202203 700 16 1440 1 C 34,429.11

54-0800-31-1203203 800 16 1789 1 C 40,959.28

54-0900-31-1203203 900 16 2330 1 C 52,413.14

Series 54/31 Gulf Spec & Jacking ScrewMetal seated Gate ValveFlange drilling to EN1092-2PN16 (ISO7005-2) Ductile Iron Body, bonnet,wedge,SS 1.4401(AISI316) StemA4 FastenersAluminium Bronze (CC331G)Trim (seat rings and face rings)Stainless Steel Gr 1.4401Jacking ScrewsClosing: Clockwise to close (CTC)Fusion Bonded Epoxy Coated to 300 Microns



12

Price list 2014


54-0350-31-1201402 350 16 298 1 C 6,292.66

54-0400-31-1201402 400 16 366 1 C 7,099.05

54-0450-31-1201402 450 16 447 1 C 8,413.76

54-0500-31-1201402 500 16 548 1 C 9,892.17

54-0600-31-1201402 600 16 717 1 C 13,297.60

54-0700-31-1202402 700 16 1440 1 C 31,911.48

54-0800-31-1203402 800 16 1789 1 C 38,367.29

54-0900-31-1203402 900 16 2330 1 C 48,826.68

Series 54\31 Gulf SpecMetal seated Gate ValveFlange drilling to EN1092-2PN16 (ISO7005-2) Ductile Iron Body, bonnet,wedge,SS 1.4057 StemA4 FastenersAluminium Bronze (CC331G)Trim (seat rings and face rings)Closing: Clockwise to close(CTC)Fusion Bonded Epoxy Coated to300 Microns


54-0350-31-1201401 350 16 298 1 C 6,875.48

54-0400-31-1201401 400 16 366 1 C 7,763.34

54-0450-31-1201401 450 16 447 1 C 9,169.61

54-0500-31-1201401 500 16 548 1 C 10,742.89

54-0600-31-1201401 600 16 717 1 C 13,645,38

54-0700-31-1202401 700 16 1440 1 C 34,024.91

54-0800-31-1203401 800 16 1789 1 C 40,179.20

54-0900-31-1203401 900 16 2330 1 C 51,836.95

Series 54\31 Gulf Spec & Jacking ScrewMetal seated Gate ValveFlange drilling to EN1092-2PN16 (ISO7005-2) Ductile Iron Body, bonnet,wedge,SS 1.4057 StemA4 FastenersAluminium Bronze (CC331G)Trim (seat rings and face rings)Stainless Steel Gr 1.4401Jacking ScrewClosing: Clockwise to close (CTC)Fusion Bonded Epoxy Coated to 300 Microns


54-0350-41-7101106 350 25 403 1 C 12,419.61

54-0400-41-7101106 400 25 516 1 C 15,201.61

54-0450-41-7101106 450 25 640 1 C 17,904.79

54-0500-41-7101106 500 25 763 1 C 21,137.69

54-0600-41-7102106 600 25 1144 1 C 29,337.79

Series 54/41 PN25Metal seated Gate ValveFlange drilling to EN1092-2(ISO7005-2) PN25Ductile Iron Body, bonnet,wedge,Stainless Steel 1.4057 StemZinc Plated Mild Steel FastenersAluminium Bronze (AB1)Trim (seat rings and face rings): Closing: Clockwise to close (CTC)


54-0350-43-7101106 350 25 436 1 C 13,581.34

54-0400-43-7101106 400 25 549 1 C 16,203.92

54-0450-43-7101106 450 25 673 1 C 18,838.67

54-0500-43-7101106 500 25 796 1 C 22,198.33

54-0600-43-7102106 600 25 1177 1 C 30,495.78

Series 54/43 PN25 & BypassMetal seated Gate Valve WithBypass valveFlange drilling to EN1092-2(ISO7005-2) PN25Ductile Iron Body, bonnet,wedge,Stainless Steel 1.4057 StemZinc Plated Mild Steel FastenersAluminium Bronze (AB1)Trim (seat rings and face rings): Closing: Clockwise to close (CTC)


13

Gate valves

Price list 2014


British Standard BS 5150/BS EN 1171 (1000 BSEN558-1 series 3)

Suitable for Gearbox or Actuator

CTC

54-1000-31-1342100 Mtg Stool F16 1000 16 3250 N/A C 67,788.77

54-1100-31-1342100 Mtg Stool F16 1100 16 4430 N/A C 85,515.06

54-1200-31-1342100 Mtg Stool F16 1200 16 4450 N/A C 91,574.30

54-1400-31-1343100 Mtg Stool F25 1400 16 11750 N/A C 171,537.85

54-1600-31-1303100 Mtg Stool F25 1600 16 14600 N/A C 219,148.31

54-1800-31-1304100 Mtg Stool F30 1800 16 16500 N/A C 377,360.52

CTO

54-1000-32-1342100 Mtg Stool F16 1000 16 3250 N/A C 67,788.77

54-1100-32-1342100 Mtg Stool F16 1100 16 4430 N/A C 85,515.06

54-1200-32-1342100 Mtg Stool F16 1200 16 4450 N/A C 91,574.30

54-1400-32-1343100 Mtg Stool F25 1400 16 11750 N/A C 171,537.85

54-1600-32-1303100 Mtg Stool F25 1600 16 14600 N/A C 219,148.31

54-1800-32-1304100 Mtg Stool F30 1800 16 16500 N/A C 377,360.52

CTC

54-1000-31-0342100 Mtg Stool F16 1000 10 3250 N/A C 67,788.77

54-1100-31-0342100 Mtg Stool F16 1100 10 4430 N/A C 85,515.06

54-1200-31-0342100 Mtg Stool F16 1200 10 4450 N/A C 91,574.30

54-1400-31-0343100 Mtg Stool F25 1400 10 11750 N/A C 171,537.85

54-1600-31-0303100 Mtg Stool F25 1600 10 14600 N/A C 219,148.31

54-1800-31-0304100 Mtg Stool F30 1800 10 16500 N/A C 377,360.52

CTO

54-1000-32-0342100 Mtg Stool F16 1000 10 3250 N/A C 67,788.77

54-1100-32-0342100 Mtg Stool F16 1100 10 4430 N/A C 85,515.06

54-1200-32-0342100 Mtg Stool F16 1200 10 4450 N/A C 91,574.30

54-1400-32-0343100 Mtg Stool F25 1400 10 11750 N/A C 171,537.85

54-1600-32-0303100 Mtg Stool F25 1600 10 14600 N/A C 219,148.31

54-1800-32-0304100 Mtg Stool F30 1800 10 16500 N/A C 377,360.52

H&S Warning: Valves must not be operated without a gearbox or actuator. Thrust is taken in the gearbox or

actuator.

For Gearbox and Actuator options please refer to sizing table.

Other Mounting Stool options may be available, upon request. LNS number stated relates to the

standard ISO mounting Flange. For differential pressures of 10Bar and above, the mounting flange and

LNS number may change.

Series 54\31, 54/32Metal seated Gate ValveFlange drilling to EN1092-2 PN16 + PN10Epoxy Coated Internally WRAS Approved 250MicronsBronze Trim Seat Rings and Face Rings to DN1000-DN1400 : Gunmetal CC491KDN1600-DN1800 : Al. Bronze CC331GZinc Plated Mild Steel FastenersStainless Steel Grade 1.4057 StemStem Nut Alumiinium Bronze Grade CC331G


14

Price list 2014

AVK ref. DN PN Weight Bypass Delivery Grossnumber mm class kg Dia code Price GBP



CTC

54-1000-33-1342100 Mtg Stool F16 1000 16 N/A 100 C 69,611.74

54-1100-33-1342100 Mtg Stool F16 1100 16 N/A 80 C 88,405.79

54-1200-33-1342100 Mtg Stool F16 1200 16 N/A 150 C 94,004.94

54-1400-33-1343100 Mtg Stool F25 1400 16 N/A 100 C 175,021.54

54-1600-33-1303100 Mtg Stool F25 1600 16 N/A 150 C 222,632.00

54-1800-33-1304100 Mtg Stool F30 1800 16 N/A 200 C 383,612.13

CTO

54-1000-34-1342100 Mtg Stool F16 1000 16 N/A 100 C 69,611.74

54-1100-34-1342100 Mtg Stool F16 1100 16 N/A 80 C 88,405.79

54-1200-34-1342100 Mtg Stool F16 1200 16 N/A 150 C 94,004.94

54-1400-34-1343100 Mtg Stool F25 1400 16 N/A 100 C 175,021.54

54-1600-34-1303100 Mtg Stool F25 1600 16 N/A 150 C 222,632.00

54-1800-34-1304100 Mtg Stool F30 1800 16 N/A 200 C 383,612.13

CTC

54-1000-33-0342100 Mtg Stool F16 1000 10 N/A 100 C 69,611.74

54-1100-33-0342100 Mtg Stool F16 1100 10 N/A 80 C 88,405.79

54-1200-33-0342100 Mtg Stool F16 1200 10 N/A 150 C 94,004.94

54-1400-33-0343100 Mtg Stool F25 1400 10 N/A 100 C 175,021.54

54-1600-33-0303100 Mtg Stool F25 1600 10 N/A 150 C 222,632.00

54-1800-33-0304100 Mtg Stool F30 1800 10 N/A 200 C 383,612.13

CTO

54-1000-34-0342100 Mtg Stool F16 1000 10 N/A 100 C 69,611.74

54-1100-34-0342100 Mtg Stool F16 1100 10 N/A 80 C 88,405.79

54-1200-34-0342100 Mtg Stool F16 1200 10 N/A 150 C 94,004.94

54-1400-34-0343100 Mtg Stool F25 1400 10 N/A 100 C 175,021.54

54-1600-34-0303100 Mtg Stool F25 1600 10 N/A 150 C 222,632.00

54-1800-34-0304100 Mtg Stool F30 1800 10 N/A 200 C 383,612.13


actuator.



standard ISO mounting Flange. For differential pressures of 10Bar and above, the mounting flange and

LNS number may change.

Series 54\33, 54/34 'BYPASS'Metal seated Gate ValveFlange drilling to EN1092-2 PN16 + PN10Epoxy Coated Internally WRAS Approved 250MicronsBronze Trim Seat Rings and Face Rings to DN1000-DN1400 : Gunmetal CC491KDN1600-DN1800 : Al. Bronze CC331GZinc Plated Mild Steel FastenersStainless Steel Grade 1.4057 StemStem Nut Alumiinium Bronze Grade CC331G


15

Gate valves

Price list 2014




CTC

54-1000-31-1342101 Mtg Stool F16 1000 16 N/A N/A C 76,213.39

54-1100-31-1342101 Mtg Stool F16 1100 16 N/A N/A C 93,426.94

54-1200-31-1342101 Mtg Stool F16 1200 16 N/A N/A C 110,006.21

54-1400-31-1343101 Mtg Stool F25 1400 16 N/A N/A C 198,104.35

54-1600-31-1303101 Mtg Stool F25 1600 16 N/A N/A C 259,999.36

54-1800-31-1304101 Mtg Stool F30 1800 16 N/A N/A C 462,920.85

CTO

54-1000-32-1342101 Mtg Stool F16 1000 16 N/A N/A C 76,213.39

54-1100-32-1342101 Mtg Stool F16 1100 16 N/A N/A C 93,426.94

54-1200-32-1342101 Mtg Stool F16 1200 16 N/A N/A C 110,006.21

54-1400-32-1343101 Mtg Stool F25 1400 16 N/A N/A C 198,104.35

54-1600-32-1303101 Mtg Stool F25 1600 16 N/A N/A C 259,999.36

54-1800-32-1304101 Mtg Stool F30 1800 16 N/A N/A C 462,920.85

CTC

54-1000-31-0342101 Mtg Stool F16 1000 10 N/A N/A C 76,213.39

54-1100-31-0342101 Mtg Stool F16 1100 10 N/A N/A C 93,426.94

54-1200-31-0342101 Mtg Stool F16 1200 10 N/A N/A C 110,006.21

54-1400-31-0343101 Mtg Stool F25 1400 10 N/A N/A C 198,104.35

54-1600-31-0303101 Mtg Stool F25 1600 10 N/A N/A C 259,999.36

54-1800-31-0304101 Mtg Stool F30 1800 10 N/A N/A C 462,920.85

CTO

54-1000-32-0342101 Mtg Stool F16 1000 10 N/A N/A C 76,213.39

54-1100-32-0342101 Mtg Stool F16 1100 10 N/A N/A C 93,426.94

54-1200-32-0342101 Mtg Stool F16 1200 10 N/A N/A C 110,006.21

54-1400-32-0343101 Mtg Stool F25 1400 10 N/A N/A C 198,104.35

54-1600-32-0303101 Mtg Stool F25 1600 10 N/A N/A C 259,999.36

54-1800-32-0304101 Mtg Stool F30 1800 10 N/A N/A C 462,920.85


actuator.



standard ISO mounting Flange. For differential pressures of 10Bar and above, the mounting flange

and LNS number may change

Shoes & Channels are required for Horizontal Installation of a Metal Seated Gate Valves in this

dimensional range

Series 54\31, 54/32 Shoes & ChannelsMetal seated Gate ValveFlange drilling to EN1092-2 PN16 + PN10Epoxy Coated Internally WRAS Approved 250MicronsBronze Trim Seat Rings and Face Rings to DN1000-DN1400 : Gunmetal CC491KDN1600-DN1800 : Al. Bronze CC331GZinc Plated Mild Steel FastenersStainless Steel Grade 1.4057 StemStem Nut Alumiinium Bronze Grade CC331G


16

Price list 2014




CTC

54-1000-33-1342101 Mtg Stool F16 1000 16 N/A 100 C 81,697.14

54-1100-33-1342101 Mtg Stool F16 1100 16 N/A 80 C 100,816.62

54-1200-33-1342101 Mtg Stool F16 1200 16 N/A 150 C 117,488.89

54-1400-33-1343101 Mtg Stool F25 1400 16 N/A 100 C 200,553.28

54-1600-33-1303101 Mtg Stool F25 1600 16 N/A 150 C 263,622.40

54-1800-33-1304101 Mtg Stool F30 1800 16 N/A 200 C 461,608.64

CTO

54-1000-34-1342101 Mtg Stool F16 1000 16 N/A 100 C 81,697.14

54-1100-34-1342101 Mtg Stool F16 1100 16 N/A 80 C 100,816.62

54-1200-34-1342101 Mtg Stool F16 1200 16 N/A 150 C 117,488.89

54-1400-34-1343101 Mtg Stool F25 1400 16 N/A 100 C 200,553.28

54-1600-34-1303101 Mtg Stool F25 1600 16 N/A 150 C 263,622.40

54-1800-34-1304101 Mtg Stool F30 1800 16 N/A 200 C 461,608.64

CTC

54-1000-33-0342101 Mtg Stool F16 1000 10 N/A 100 C 81,697.14

54-1100-33-0342101 Mtg Stool F16 1100 10 N/A 80 C 100,816.62

54-1200-33-0342101 Mtg Stool F16 1200 10 N/A 150 C 117,488.89

54-1400-33-0343101 Mtg Stool F25 1400 10 N/A 100 C 200,553.28

54-1600-33-0303101 Mtg Stool F25 1600 10 N/A 150 C 263,622.40

54-1800-33-0304101 Mtg Stool F30 1800 10 N/A 200 C 461,608.64

CTO

54-1000-34-0342101 Mtg Stool F16 1000 10 N/A 100 C 81,697.14

54-1100-34-0342101 Mtg Stool F16 1100 10 N/A 80 C 100,816.62

54-1200-34-0342101 Mtg Stool F16 1200 10 N/A 150 C 117,488.89

54-1400-34-0343101 Mtg Stool F25 1400 10 N/A 100 C 200,553.28

54-1600-34-0303101 Mtg Stool F25 1600 10 N/A 150 C 263,622.40

54-1800-34-0304101 Mtg Stool F30 1800 10 N/A 200 C 461,608.64


actuator.





Shoes & Channels are required for Horizontal Installation of a Metal Seated Gate Valves in this

dimensional range

Series 54\33, 54/34 Shoes & Channels / BYPASSMetal seated Gate ValveFlange drilling to EN1092-2 PN16 + PN10Epoxy Coated Internally WRAS Approved 250MicronsBronze Trim Seat Rings and Face Rings to DN1000-DN1400 : Gunmetal CC491KDN1600-DN1800 : Al. Bronze CC331GZinc Plated Mild Steel FastenersStainless Steel Grade 1.4057 StemStem Nut Alumiinium Bronze Grade CC331G


17

Gate valves

Price list 2014


54-0400-35-0101300 PN10 Mtg Stool F14 400 10 398 1 C 9,860.69

54-0600-35-0101300 PN10 Mtg Stool F14 600 10 775 1 C 19,662.55

54-0800-35-0101309 PN10 Mtg Stool F14 800 10 1818 1 C 46,421.18

54-0400-35-1101300 PN16 Mtg Stool F14 400 16 398 1 C 9,860.69

54-0600-35-1101300 PN16 Mtg Stool F14 600 16 775 1 C 19,662.55

54-0800-35-1103309 PN16 Mtg Stool F25 800 16 1818 1 C 46,421.18

54-0400-35-6141300 Table 'E', Mtg Stool F14 400 E 398 1 C 9,860.69



Series 54/35 Kuwait SpecMetal seated Gate ValveFlange drilling to EN1092-2 PN10 / PN16 / TABLE 'E'(ISO7005-2) Ductile Iron Body, Bonnet, WedgeAluminium Bronze Stem Grade CA104Wedge Nut (DN400-600) : Gunmetal CC491KWedge Nut (DN800) : Al. Bronze C331GZinc Plated Mild Steel FastenersBronze Trim Seat Rings andFace Rings toPN10/16 : Al. Bronze CC331GTable 'E' : Gun Metal CC491KClockwise to Close


54-0400-37-0101300 PN10 Mtg Stool F14 400 10 398 1 C 10,717.83

54-0600-37-0101300 PN10 Mtg Stool F14 600 10 775 1 C 20,715.71

54-0800-37-0101309 PN10 Mtg Stool F14 800 10 1818 1 C 48,639.70

54-0400-37-1101300 PN16 Mtg Stool F14 400 16 398 1 C 10,717.83

54-0600-37-1101300 PN16 Mtg Stool F14 600 16 775 1 C 20,715.71

54-0800-37-1103309 PN16 Mtg Stool F25 800 16 1818 1 C 48,639.70




Series 54/35 Kuwait SpecMetal seated Gate Valve with BYPASS VALVEFlange drilling to EN1092-2 PN10 / PN16 / TABLE 'E'(ISO7005-2) Ductile Iron Body, Bonnet, WedgeAluminium Bronze Stem Grade CA104Wedge Nut (DN400-600) : Gunmetal CC491KWedge Nut (DN800) : Al. Bronze C331GZinc Plated Mild Steel FastenersBronze Trim Seat Rings andFace Rings toPN10/16 : Al. Bronze CC331GTable 'E' : Gun Metal CC491KClockwise to Close


54-0400-35-0106300 PN10 Mtg Stool F14 400 10 398 1 C 13,325.91

54-0600-35-0106300 PN10 Mtg Stool F14 600 10 775 1 C 23,751.88

54-0800-35-0106300 PN10 Mtg Stool F14 800 10 1818 1 C 67,154.29

54-0400-35-1106300 PN16 Mtg Stool F14 400 16 398 1 C 13,325.91

54-0600-35-1106300 PN16 Mtg Stool F14 600 16 775 1 C 23,751.88

54-0800-35-1106300 PN16 Mtg Stool F14 800 16 1818 1 C 67,154.29




Series 54/35 Kuwait SpecMetal seated Gate Valve OS&YFlange drilling to EN1092-2 PN10 / PN16 / TABLE 'E'(ISO7005-2) Ductile Iron Body, Bonnet, WedgeAluminium Bronze Stem Grade CA104Zinc Plated Mild Steel FastenersBronze Trim Seat Rings and Face Rings toPN10/16 : Al. Bronze CC331GTable 'E' : Gun Metal CC491KClockwise to Close


18

Price list 2014


54-0400-37-0106300 PN10 Mtg Stool F14 400 10 398 1 C 12,242.78

54-0600-37-0106300 PN10 Mtg Stool F14 600 10 775 1 C 22,266.83

54-0800-37-0106300 PN10 Mtg Stool F14 800 10 1818 1 C 63,662.63

54-0400-37-1106300 PN16 Mtg Stool F14 400 16 398 1 C 12,242.78

54-0600-37-1106300 PN16 Mtg Stool F14 600 16 775 1 C 22,266.83

54-0800-37-1106300 PN16 Mtg Stool F14 800 16 1818 1 C 63,662.63




Series 54/37 Kuwait SpecMetal seated Gate Valve OS&Ywith BYPASS VALVEFlange drilling to EN1092-2PN10 / PN16 / TABLE 'E'(ISO7005-2) Ductile Iron Body, Bonnet,WedgeAluminium Bronze Stem GradeCA104Zinc Plated Mild Steel FastenersBronze Trim Seat Rings andFace Rings toPN10/16 : Al. Bronze CC331GTable 'E' : Gun Metal CC491KClockwise to Close


54-0350-31-1806200 PN16 Mtg Stool F14 350 16 568 1 C 7,918.77

54-0400-31-1806200 PN16 Mtg Stool F14 400 16 751 1 C 8,799.24

54-0450-31-1806200 PN16 Mtg Stool F14 450 16 1500 1 C 10,338.97

NOTE: Where black paint is required the top level LNS number may differ from above

Series 54/31Metal seated Gate Valve OS&YFlange drilling to EN1092-2 PN16(ISO7005-2) Ductile Iron Body, Bonnet, WedgeStainless Steel Gr 1.4401 Rising StemStainless Steel Gr A4 FastenersAluminium Bronze Wedge Nut, Seat and Face RingsGr CC331GClockwise to CloseEpoxy Coated Black PaintTo Suit ASHGAL and ADSSCMarket


54-0500-31-1806203 PN16 Mtg Stool F14 500 16 568 1 C 12,920.95

54-0600-31-1806203 PN16 Mtg Stool F14 600 16 751 1 C 16,093.35

54-0700-31-1806203 PN16 Mtg Stool F14 700 16 1500 1 C 37,219.61

54-0800-31-1806203 PN16 Mtg Stool F14 800 16 2000 1 C 43,833.54

54-0900-31-1806203 PN16 Mtg Stool F16 900 16 2700 1 C 54,344.30

54-1000-31-1806203 PN16 Mtg Stool F16 1000 16 3250 1 C 68,966.27


Series 54/31Metal seated Gate Valve OS&YFlange drilling to EN1092-2 PN16(ISO7005-2) Ductile Iron Body, Bonnet, WedgeStainless Steel Gr 1.4401 Rising StemStainless Steel Gr A4 FastenersAluminium Bronze Wedge Nut, Seat and Face RingsGr CC331GStainless Steel Jacking ScrewGr 1.4401Clockwise to CloseEpoxy Coated Black PaintTo Suit ASHGAL and ADSSCMarket


19

Gate valves

Price list 2014


54-0500-31-1806401 PN16 Mtg Stool F14 500 16 568 1 C 12,266.81

54-0600-31-1806401 PN16 Mtg Stool F14 600 16 751 1 C 15,356.97

54-0700-31-1806401 PN16 Mtg Stool F14 700 16 1500 1 C 35,735.05

54-0800-31-1806401 PN16 Mtg Stool F14 800 16 2000 1 C 42,106.22

54-0900-31-1806401 PN16 Mtg Stool F16 900 16 2700 1 C 52,242.88

54-1000-31-1806401 PN16 Mtg Stool F16 1000 16 3250 1 C 66,158.17


Series 54/31Metal seated Gate Valve OS&YFlange drilling to EN1092-2 PN16(ISO7005-2) Ductile Iron Body, Bonnet, WedgeStainless Steel Gr 1.4057 Rising StemStainless Steel Gr A4 FastenersAluminium Bronze Wedge Nut, Seat and Face RingsGr CC331GStainless Steel Jacking ScrewGr 1.4401Clockwise to CloseEpoxy Coated Black PaintTo Suit ASHGAL and ADSSCMarket


54-0350-31-1806402 PN16 Mtg Stool F14 350 16 568 1 C 7,397.81

54-0400-31-1806402 PN16 Mtg Stool F14 400 16 751 1 C 8,241.49

54-0450-31-1806402 PN16 Mtg Stool F14 450 16 1500 1 C 9,823.61


Series 54/31Metal seated Gate Valve OS&YFlange drilling to EN1092-2 PN16(ISO7005-2) Ductile Iron Body, Bonnet, WedgeStainless Steel Gr 1.4057 Rising StemStainless Steel Gr A4 FastenersAluminium Bronze Wedge Nut, Seat and Face RingsGr CC331GClockwise to CloseEpoxy Coated Black PaintTo Suit ASHGAL and ADSSCMarket


20

Price list 2014


British Standard BS 5150/BS EN 1171


CTC

54-1000-31-1442200 Mtg Stool F16 1000 16 3250 N/A C 75,079.21

54-1100-31-1442200 Mtg Stool F16 1100 16 4430 N/A C 94,128.21

54-1200-31-1442200 Mtg Stool F16 1200 16 4450 N/A C 99,386.67

54-1400-31-1443200 Mtg Stool F25 1400 16 11750 N/A C 177,495.42

54-1600-31-1403200 Mtg Stool F25 1600 16 14600 N/A C 210,691.20

54-1800-31-1404200 Mtg Stool F30 1800 16 16500 N/A C 381,089.91

CTO

54-1000-32-1442200 Mtg Stool F16 1000 16 3250 N/A C 75,079.21

54-1100-32-1442200 Mtg Stool F16 1100 16 4430 N/A C 94,128.21

54-1200-32-1442200 Mtg Stool F16 1200 16 4450 N/A C 99,386.67

54-1400-32-1443200 Mtg Stool F25 1400 16 11750 N/A C 177,495.42

54-1600-32-1403200 Mtg Stool F25 1600 16 14600 N/A C 210,691.20

54-1800-32-1404200 Mtg Stool F30 1800 16 16500 N/A C 381,089.91

CTC

54-1000-31-0442200 Mtg Stool F16 1000 10 3250 N/A C 75,079.21

54-1100-31-0442200 Mtg Stool F16 1100 10 4430 N/A C 94,128.21

54-1200-31-0442200 Mtg Stool F16 1200 10 4450 N/A C 99,386.67

54-1400-31-0443200 Mtg Stool F25 1400 10 11750 N/A C 177,495.42

54-1600-31-0403200 Mtg Stool F25 1600 10 14600 N/A C 210,691.20

54-1800-31-0404200 Mtg Stool F30 1800 10 16500 N/A C 381,089.91

CTO

54-1000-32-0442200 Mtg Stool F16 1000 10 3250 N/A C 75,079.21

54-1100-32-0442200 Mtg Stool F16 1100 10 4430 N/A C 94,128.21

54-1200-32-0442200 Mtg Stool F16 1200 10 4450 N/A C 99,386.67

54-1400-32-0443200 Mtg Stool F25 1400 10 11750 N/A C 177,495.42

54-1600-32-0403200 Mtg Stool F25 1600 10 14600 N/A C 210,691.20

54-1800-32-0404200 Mtg Stool F30 1800 10 16500 N/A C 381,089.91


actuator.





FOR GULF SPECIFICATION APPLICATIONS Exceeding 6Bar unbalanced pressure please contact

Glenfield Sales Dept as grade SS 1.4401 (316) stems are not always suitable for high unbalanced

pressures

Series 54/31, 54/32 Gulf SpecificationMetal seated Gate ValveFlange drilling to EN1092-2 PN16 + PN10Epoxy Coated Internally WRAS Approved 300MicronsBronze Trim Seat Rings and Face Rings to DN1000-DN1400 : Gunmetal CC491KDN1600-DN1800 : Al. Bronze CC331GStainless Steel Grade A4 FastenersStainless Steel Grade 1.4401 StemStem Nut Alumiinium Bronze Grade CC331G


21

Gate valves

Price list 2014




CTC

54-1000-33-1442200 Mtg Stool F16 1000 16 N/A 100 C 77,483.73

54-1100-33-1442200 Mtg Stool F16 1100 16 N/A 80 C 97,774.93

54-1200-33-1442200 Mtg Stool F16 1200 16 N/A 150 C 106,516.81

54-1400-33-1443200 Mtg Stool F25 1400 16 N/A 100 C 188,021.78

54-1600-33-1403200 Mtg Stool F25 1600 16 N/A 150 C 225,005.94

54-1800-33-1404200 Mtg Stool F30 1800 16 N/A 200 C 397,124.37

CTO

54-1000-34-1442200 Mtg Stool F16 1000 16 N/A 100 C 77,483.73

54-1100-34-1442200 Mtg Stool F16 1100 16 N/A 80 C 97,774.93

54-1200-34-1442200 Mtg Stool F16 1200 16 N/A 150 C 106,516.81

54-1400-34-1443200 Mtg Stool F25 1400 16 N/A 100 C 188,021.78

54-1600-34-1403200 Mtg Stool F25 1600 16 N/A 150 C 225,005.94

54-1800-34-1404200 Mtg Stool F30 1800 16 N/A 200 C 397,124.37

CTC

54-1000-33-0442200 Mtg Stool F16 1000 10 N/A 100 C 77,483.73

54-1100-33-0442200 Mtg Stool F16 1100 10 N/A 80 C 97,774.93

54-1200-33-0442200 Mtg Stool F16 1200 10 N/A 150 C 106,516.81

54-1400-33-0443200 Mtg Stool F25 1400 10 N/A 100 C 188,021.78

54-1600-33-0403200 Mtg Stool F25 1600 10 N/A 150 C 225,005.94

54-1800-33-0404200 Mtg Stool F30 1800 10 N/A 200 C 397,124.37

CTO

54-1000-34-0442200 Mtg Stool F16 1000 10 N/A 100 C 77,483.73

54-1100-34-0442200 Mtg Stool F16 1100 10 N/A 80 C 97,774.93

54-1200-34-0442200 Mtg Stool F16 1200 10 N/A 150 C 106,516.81

54-1400-34-0443200 Mtg Stool F25 1400 10 N/A 100 C 188,021.78

54-1600-34-0403200 Mtg Stool F25 1600 10 N/A 150 C 225,005.94

54-1800-34-0404200 Mtg Stool F30 1800 10 N/A 200 C 397,124.37


actuator.







pressures

Series 54/33, 54/34 Gulf Specification WITHBYPASSMetal seated Gate Valve WITH BYPASS VALVEFlange drilling to EN1092-2 PN16 + PN10Epoxy Coated Internally WRAS Approved 300MicronsBronze Trim Seat Rings and Face Rings to DN1000-DN1400 : Gunmetal CC491KDN1600-DN1800 : Al. Bronze CC331GStainless Steel Grade A4 FastenersStainless Steel Grade 1.4401 StemStem Nut AlumiiniumBronze Grade CC331G


22

Price list 2014




CTC

54-1000-31-1402201 Mtg Stool F16 1000 16 3250 N/A C 82,357.47

54-1100-31-1442201 Mtg Stool F16 1100 16 4430 N/A C 100,562.53

54-1200-31-1402201 Mtg Stool F16 1200 16 4450 N/A C 125,159.14

54-1400-31-1443201 Mtg Stool F25 1400 16 11750 N/A C 204,092.49

54-1600-31-1443201 Mtg Stool F25 1600 16 14600 N/A C 243,586.76

54-1800-31-1444201 Mtg Stool F30 1800 16 16500 N/A C 431,723.96

CTO

54-1000-32-1402201 Mtg Stool F16 1000 16 3250 N/A C 82,357.47

54-1100-32-1442201 Mtg Stool F16 1100 16 4430 N/A C 100,562.53

54-1200-32-1402201 Mtg Stool F16 1200 16 4450 N/A C 125,159.14

54-1400-32-1443201 Mtg Stool F25 1400 16 11750 N/A C 204,092.49

54-1600-32-1443201 Mtg Stool F25 1600 16 14600 N/A C 243,586.76

54-1800-32-1444201 Mtg Stool F30 1800 16 16500 N/A C 431,723.96

CTC

54-1000-31-0402201 Mtg Stool F16 1000 10 3250 N/A C 82,357.47

54-1100-31-0442201 Mtg Stool F16 1100 10 4430 N/A C 100,562.53

54-1200-31-0402201 Mtg Stool F16 1200 10 4450 N/A C 125,159.14

54-1400-31-0443201 Mtg Stool F25 1400 10 11750 N/A C 204,092.49

54-1600-31-0443201 Mtg Stool F25 1600 10 14600 N/A C 243,586.76

54-1800-31-0444201 Mtg Stool F30 1800 10 16500 N/A C 431,723.96

CTO

54-1000-32-0402201 Mtg Stool F16 1000 10 3250 N/A C 82,357.47

54-1100-32-0442201 Mtg Stool F16 1100 10 4430 N/A C 100,562.53

54-1200-32-0402201 Mtg Stool F16 1200 10 4450 N/A C 125,159.14

54-1400-32-0443201 Mtg Stool F25 1400 10 11750 N/A C 204,092.49

54-1600-32-0443201 Mtg Stool F25 1600 10 14600 N/A C 243,586.76

54-1800-32-0444201 Mtg Stool F30 1800 10 16500 N/A C 431,723.96


actuator.







pressures

Series 54/31, 54/32 Gulf Specification WITHSHOES & CHANNELSMetal seated Gate Valve WITH SHOES ANDCHANNELSFlange drilling to EN1092-2 PN16 + PN10Epoxy Coated Internally WRAS Approved 300MicronsBronze Trim Seat Rings and Face Rings to DN1000-DN1400 : Gunmetal CC491KDN1600-DN1800 : Al. Bronze CC331GStainless Steel Grade A4 FastenersStainless Steel Grade1.4401 StemStem Nut AlumiiniumBronze Grade CC331G


23

Gate valves

Price list 2014




CTC

54-1000-33-1402201 Mtg Stool F16 1000 16 N/A 100 C 88,261.59

54-1100-33-1442201 Mtg Stool F16 1100 16 N/A 80 C 108,463.01

54-1200-33-1402201 Mtg Stool F16 1200 16 N/A 150 C 129,137.43

54-1400-33-1443201 Mtg Stool F25 1400 16 N/A 100 C 206,474.59

54-1600-33-1443201 Mtg Stool F25 1600 16 N/A 150 C 246,254.35

54-1800-33-1444201 Mtg Stool F30 1800 16 N/A 200 C 433,758.23

CTO

54-1000-34-1402201 Mtg Stool F16 1000 16 N/A 100 C 88,261.59

54-1100-34-1442201 Mtg Stool F16 1100 16 N/A 80 C 108,463.01

54-1200-34-1402201 Mtg Stool F16 1200 16 N/A 150 C 129,137.43

54-1400-34-1443201 Mtg Stool F25 1400 16 N/A 100 C 206,474.59

54-1600-34-1443201 Mtg Stool F25 1600 16 N/A 150 C 246,254.35

54-1800-34-1444201 Mtg Stool F30 1800 16 N/A 200 C 433,758.23

CTC

54-1000-33-0402201 Mtg Stool F16 1000 10 N/A 100 C 88,261.59

54-1100-33-0442201 Mtg Stool F16 1100 10 N/A 80 C 108,463.01

54-1200-33-0402201 Mtg Stool F16 1200 10 N/A 150 C 129,137.43

54-1400-33-0443201 Mtg Stool F25 1400 10 N/A 100 C 206,474.59

54-1600-33-0443201 Mtg Stool F25 1600 10 N/A 150 C 246,254.35

54-1800-33-0444201 Mtg Stool F30 1800 10 N/A 200 C 433,758.23

CTO

54-1000-34-0402201 Mtg Stool F16 1000 10 N/A 100 C 88,261.59

54-1100-34-0442201 Mtg Stool F16 1100 10 N/A 80 C 108,463.01

54-1200-34-0402201 Mtg Stool F16 1200 10 N/A 150 C 129,137.43

54-1400-34-0443201 Mtg Stool F25 1400 10 N/A 100 C 206,474.59

54-1600-34-0443201 Mtg Stool F25 1600 10 N/A 150 C 246,254.35

54-1800-34-0444201 Mtg Stool F30 1800 10 N/A 200 C 433,758.23


actuator.







pressures

Series 54/33, 54/34 Gulf Specification, SHOES &CHANNELS & BYPASS VALVEMetal seated Gate Valve WITH SHOES ANDCHANNELS, BYPASS VALVEFlange drilling to EN1092-2 PN16 + PN10Epoxy Coated Internally WRAS Approved 300MicronsBronze Trim Seat Rings and Face Rings to DN1000-DN1400 : Gunmetal CC491KDN1600-DN1800 : Al. Bronze CC331GStainless Steel Grade A4 FastenersStainless Steel Grade 1.4401 StemStem Nut Alumiinium Bronze Grade CC331G


24

Price list 2014


54-0350-31-1106100 Mtg Stool F14 350 16 300 1 C 7,515.84

54-0350-31-0106100 Mtg Stool F14 350 10 300 1 C 7,515.84

54-0400-31-1106100 Mtg Stool F14 400 16 375 1 C 8,253.04

54-0400-31-0106100 Mtg Stool F14 400 10 375 1 C 8,253.04

54-0450-31-1106100 Mtg Stool F14 450 16 452 1 C 10,127.30

54-0450-31-0106100 Mtg Stool F14 450 10 452 1 C 10,127.30

54-0500-31-1106100 Mtg Stool F14 500 16 568 1 C 13,278.39

54-0500-31-0106100 Mtg Stool F14 500 10 568 1 C 13,278.39

54-0600-31-1106100 Mtg Stool F14 600 16 751 1 C 16,625.70

54-0600-31-0106100 Mtg Stool F14 600 10 751 1 C 16,625.70

54-0700-31-1106100 Mtg Stool F14 700 16 1500 1 C 32,428.00

54-0700-31-0106100 Mtg Stool F14 700 10 1500 1 C 32,428.00

54-0800-31-1106100 Mtg Stool F14 800 16 2000 1 C 42,269.93

54-0800-31-0106100 Mtg Stool F14 800 10 2000 1 C 42,269.93

54-0900-31-1106100 Mtg Stool F16 900 16 2700 1 C 46,824.73

54-0900-31-0106100 Mtg Stool F16 900 10 2700 1 C 46,824.73

Series 54\31 OS&YRising Stem Metal seated Gate ValveFlange drilling to EN1092-2(ISO7005-2) Ductile Iron Body, bonnet, wedge,Wedge Nut Aluminium Bronze(CC331G)Stainless Steel 1.4057 StemZinc plated mild steel FastenersAluminium Bronze (AB1)Trim (seat rings and face rings): Closing: Clockwise to close (CTC)


54-0350-33-1106100 Mtg Stool F14 350 16 307 1 C 7,911.27

54-0350-33-0106100 Mtg Stool F14 350 10 307 1 C 7,911.27

54-0400-33-1106100 Mtg Stool F14 400 16 382 1 C 8,644.00

54-0400-33-0106100 Mtg Stool F14 400 10 382 1 C 8,644.00

54-0450-33-1106100 Mtg Stool F14 450 16 462 1 C 10,566.27

54-0450-33-0106100 Mtg Stool F14 450 10 462 1 C 10,571.41

54-0500-33-1106100 Mtg Stool F14 500 16 578 1 C 13,321.95

54-0500-33-0106100 Mtg Stool F14 500 10 578 1 C 13,321.95

54-0600-33-1106100 Mtg Stool F14 600 16 761 1 C 17,029.89

54-0600-33-0106100 Mtg Stool F14 600 10 761 1 C 17,029.89

54-0700-33-1106100 Mtg Stool F14 700 16 1500 1 C 33,168.54

54-0700-33-0106100 Mtg Stool F14 700 10 1500 1 C 33,168.54

54-0800-33-1106100 Mtg Stool F14 800 16 2000 1 C 42,498.13

54-0800-33-0106100 Mtg Stool F14 800 10 2000 1 C 42,498.13

54-0900-33-1106100 Mtg Stool F16 900 16 2700 1 C 47,511.96

54-0900-33-0106100 Mtg Stool F16 900 10 2700 1 C 47,511.96

Series 54\33 OS&YRising Stem Metal Seated GateValve With Bypass ValveFlange drilling to EN1092-2(ISO7005-2) Ductile Iron Body, bonnet,wedge,Stainless Steel 1.4057 StemWedge Nut Aluminium Bronze(CC331G)Zinc plated mild steel FastenersAluminium Bronze (AB1)Trim (seat rings and face rings): Closing: Clockwise to close (CTC)


25

Gate valves

Price list 2014




CTC

54-1000-31-1306100 Mtg Stool F16 1000 16 3,250 N/A C 81,745.71

54-1100-31-1306100 Mtg Stool F16 1100 16 2,650 N/A C 101,098.39

54-1200-31-1306100 Mtg Stool F16 1200 16 3,250 N/A C 107,695.75

CTO

54-1000-32-1306100 Mtg Stool F16 1000 16 3,250 N/A C 81,745.71

54-1100-32-1306100 Mtg Stool F16 1100 16 2,650 N/A C 101,098.39

54-1200-32-1306100 Mtg Stool F16 1200 16 3,250 N/A C 107,695.75


actuator.







pressures

Series 54/31 Rising StemMetal seated Gate ValveFlange drilling to EN1092-2 PN16Ductile Iron Body, bonnet, wedge,Stainless Steel Gr 1.4057 StemWedge Nut Aluminium Bronze(CC331G)Zinc Plated Mild Steel FastenersBronze Trim BS EN 1982(seat rings and face rings): Epoxy coating Internally andexternally WRAS Approved




CTC

54-1000-33-1306100 Mtg Stool F16 1000 16 N/A 100 C 83,101.73

54-1100-33-1306100 Mtg Stool F16 1100 16 N/A 80 C 103,438.40

54-1200-33-1306100 Mtg Stool F16 1200 16 N/A 150 C 117,779.86

CTO

54-1000-34-1306100 Mtg Stool F16 1000 16 N/A 100 C 83,101.73

54-1100-34-1306100 Mtg Stool F16 1100 16 N/A 80 C 103,438.40

54-1200-34-1306100 Mtg Stool F16 1200 16 N/A 150 C 117,779.86


actuator.







pressures

Series 54/33 Rising Stem - BYPASSMetal Seated Gate ValveFlange drilling to EN1092-2PN16Ductile Iron Body, bonnet,wedge,Stainless Steel Gr 1.4057 StemWedge Nut Aluminium Bronze(CC331G)Zinc Plated Mild Steel FastenersBronze Trim BS EN 1982(seat rings and face rings): Epoxy coating Internally andexternally WRAS Approved


26

Price list 2014


Similar in construction to STD Series 54 with rising stem, travel stop and a parallel door instead of a

wedge. Sealing by upstream pressure on door PN16

CTC

54-0600-11-1346100 Mtg Stool F16 600 16 N/A N/A C POA

54-0900-11-1346100 Mtg Stool F16 900 16 N/A N/A C 116,723.22

54-1000-11-1346100 Mtg Stool F16 1000 16 N/A N/A C 117,499.31

54-1200-11-1346100 Mtg Stool F16 1200 16 N/A N/A C 156,907.52

54-1400-11-1346100 Mtg Stool F25 1400 16 N/A N/A C 224,239.55

CTO


54-0900-12-1346100 Mtg Stool F16 900 16 N/A N/A C 116,723.22

54-1000-12-1346100 Mtg Stool F16 1000 16 N/A N/A C 117,499.31

54-1200-12-1346100 Mtg Stool F16 1200 16 N/A N/A C 156,907.52

54-1400-12-1346100 Mtg Stool F25 1400 16 N/A N/A C 224,239.55


actuator.







pressures

Series 54/11, 54/12 PARALLEL FACEMetal seated Gate ValveFlange drilling to EN1092-2 PN16Ductile Iron Body, bonnet, wedge,Stainless Steel Gr 1.4057 StemWedge Nut Aluminium Bronze(CC331G)Zinc Plated Mild Steel FastenersBronze Trim Bs EN 1982(seat rings and face rings): Epoxy coating Internally andexternally WRAS Approved


Similar in construction to STD Series 54 with rising stem, travel stop and a parallel door instead of a

wedge. Sealing by upstream pressure on door PN16

CTC


54-0900-13-1346100 Mtg Stool F16 900 16 N/A N/A C 121,989.65

54-1000-13-1346100 Mtg Stool F16 1000 16 N/A N/A C 122,784.00

54-1200-13-1346100 Mtg Stool F16 1200 16 N/A N/A C 164,555.93

54-1400-13-1346100 Mtg Stool F25 1400 16 N/A N/A C 229,994.11

CTO


54-0900-14-1346100 Mtg Stool F16 900 16 N/A N/A C 121,989.65

54-1000-14-1346100 Mtg Stool F16 1000 16 N/A N/A C 122,784.00

54-1200-14-1346100 Mtg Stool F16 1200 16 N/A N/A C 164,555.93

54-1400-14-1346100 Mtg Stool F25 1400 16 N/A N/A C 229,994.11


actuator.







pressures

Series 54/13, 54/14 PARALLEL FACE - BYPASSMetal Seated Gate ValveFlange drilling to EN1092-2PN16Ductile Iron Body, bonnet,wedge,Stainless Steel Gr 1.4057 StemWedge Nut Aluminium Bronze(CC331G)Zinc Plated Mild Steel FastenersBronze Trim Bs EN 1982(seat rings and face rings): Epoxy coating Internally andexternally WRAS Approved


27

Gate valves

Price list 2014

AVK ref. DN ANSI Test Pressure Units Delivery Grossnumber mm (psi) (psi) pr. Pallet code Price GBP

AWWA Gate Valve, 150psi WP, 300psi TP

(AWWA) C500, up to 48")

CTC

54-2415-512323420 Mtg Stool F25 600 (24") 150 300 N/A C 29,556.00

54-3015-512323420 Mtg Stool F25 750 (30") 150 300 N/A C 47,720.00

54-3615-512323420 Mtg Stool F25 900 (36") 150 300 N/A C 73,136.00

54-4815-512324420 Mtg Stool F30 1200 (48") 150 300 N/A C 178,998.14

54-5415-512324420 Mtg Stool F30 1400 (54") 150 300 N/A C 194,341.80

54-6015-512324420 Mtg Stool F30 1500 (60") 150 300 N/A C 276,967.25

54-7215-512324420 Mtg Stool F30 1800 (72") 150 300 N/A C 523,838.22

CTO

54-2415-522323420 Mtg Stool F25 600 (24") 150 300 N/A C 29,556.00

54-3015-522323420 Mtg Stool F25 750 (30") 150 300 N/A C 47,720.00

54-3615-522323420 Mtg Stool F25 900 (36") 150 300 N/A C 73,136.00

54-4815-522324420 Mtg Stool F30 1200 (48") 150 300 N/A C 178,998.14

54-5415-522324420 Mtg Stool F30 1400 (54") 150 300 N/A C 194,341.80

54-6015-522324420 Mtg Stool F30 1500 (60") 150 300 N/A C 276,967.25

54-7215-522324420 Mtg Stool F30 1800 (72") 150 300 N/A C 523,838.22


actuator.

Gearbox/Electrical Actuation options available on request

Shoes, Channels, Scraper, repacking under pressure are included as standard

WP = Working Pressure, TP = Test Pressure

LNS number stated relates to standard ISO mounting flange. For Differential pressures of 145 psi and above

the mounting flange and LNS number may change

Series 54\1551, 54/1552 (AWWA)Metal seated Gate ValveFlanges:-ANSI B16.1 CLASS 125(UP TO 48")ANSI/AWWA C115 TABLE2 (54" TO 60")AWWA C207-01 CLASSD-3.5" THICK (72")Ductile Iron Body, bonnet,wedge, - BS (AS536)Wedge Nut AluminiumBronze (CC331G)Stainless Steel Gr 1.4057 StemStainless Steel Gr A4 (316) FastenersGunmetal Trim BS EN 1982 CC491K/B62 C83600(seat rings and face rings): Epoxy coating Internally WRAS Approved

AVK ref. DN ANSI Test Pressure B/P Delivery Grossnumber mm (psi) (psi) mm code Price GBP


(AWWA) C500, up to 48")

CTC

54-2415-532323420 Mtg Stool F25 600 (24") 150 300 4” C 31,038.07

54-3015-532323420 Mtg Stool F25 750 (30") 150 300 4” C 49,352.22

54-3615-532323420 Mtg Stool F25 900 (36") 150 300 6” C 74,919.79

54-4815-532324420 Mtg Stool F30 1200 (48") 150 300 8” C 183,944.79

54-5415-532324420 Mtg Stool F30 1400 (54") 150 300 8” C 197,686.84

54-6015-532324420 Mtg Stool F30 1500 (60") 150 300 8” C 279,515.79

54-7215-532324420 Mtg Stool F30 1800 (72”) 150 300 8” C 523,343.40

CTO

54-2415-542323420 Mtg Stool F25 600 (24") 150 300 4” C 31,038.07

54-3015-542323420 Mtg Stool F25 750 (30") 150 300 4” C 49,352.22

54-3615-542323420 Mtg Stool F25 900 (36") 150 300 6” C 74,919.79

54-4815-542324420 Mtg Stool F30 1200 (48") 150 300 8” C 183,944.79

54-5415-542324420 Mtg Stool F30 1400 (54") 150 300 8” C 197,686.84

54-6015-542324420 Mtg Stool F30 1500 (60") 150 300 8” C 279,515.79

54-7215-542324420 Mtg Stool F30 1800 (72”) 150 300 8” C 523,343.40


actuator.






Series 54\1553, 54/1554 - BYPASS - (AWWA)Metal seated Gate ValveFlanges:-ANSI B16.1 CLASS 125 (UP TO 48")ANSI/AWWA C115 TABLE 2(54" TO 60")AWWA C207-01 CLASS D-3.5"THICK (72")Ductile Iron Body, bonnet,wedge, - BS (AS536)Wedge Nut Aluminium Bronze(CC331G)Stainless Steel Gr 1.4057 StemStainless Steel Gr A4 (316)FastenersGunmetal Trim BS EN 1982 CC491K/B62 C83600(seat rings and face rings): Epoxy coating Internally WRAS Approved


28

Price list 2014



CTC

54-2425-513323420 Mtg Stool F25 600 (24") 250 500 N/A C 30,789.09

54-3025-513323420 Mtg Stool F25 750 (30") 250 500 N/A C 49,489.83

54-3625-513323420 Mtg Stool F25 900 (36") 250 500 N/A C 75,100.57

54-4825-513325420 Mtg Stool F35 1200 (48") 250 500 N/A C 200,023.29

54-5425-513325420 Mtg Stool F35 1400 (54") 250 500 N/A C 204,000.00

54-6025-513325420 Mtg Stool F35 1500 (60") 250 500 N/A C 288,476.92

54-7225-513325420 Mtg Stool F35 1800 (72") 250 500 N/A C 533,583.44

CTO

54-2425-523323420 Mtg Stool F25 600 (24") 250 500 N/A C 30,789.09

54-3025-523323420 Mtg Stool F25 750 (30") 250 500 N/A C 49,489.83

54-3625-523323420 Mtg Stool F25 900 (36") 250 500 N/A C 75,100.57

54-4825-523325420 Mtg Stool F35 1200 (48") 250 500 N/A C 200,023.29

54-5425-523325420 Mtg Stool F35 1400 (54") 250 500 N/A C 204,000.00

54-6025-523325420 Mtg Stool F35 1500 (60") 250 500 N/A C 288,476.92

54-7225-523325420 Mtg Stool F35 1800 (72") 250 500 N/A C 533,583.44


actuator.






Series 54\2551, 54/2552 (AWWA)Metal seated Gate ValveFlanges:-ANSI B16.1 CLASS 250(UP TO 48")ANSI/AWWA C115 TABLE2 (54" TO 60")Ductile Iron Body, bonnet,wedge, - BS (AS536)Stainless Steel Gr 1.4057Stem Wedge Nut AluminiumBronze (CC331G)Stainless Steel Gr A4 (316) FastenersGunmetal Trim BS EN 1982 CC491K/B62 C83600(seat rings and face rings): Epoxy coating Internally WRAS Approved



CTC

54-2425-533323420 Mtg Stool F25 600 (24") 250 500 N/A C 32,282.98

54-3025-533323420 Mtg Stool F25 750 (30") 250 500 N/A C 51,141.15

54-3625-533323420 Mtg Stool F25 900 (36") 250 500 N/A C 76,913.61

54-4825-533325420 Mtg Stool F35 1200 (48") 250 500 N/A C 201,504.96

54-5425-533325420 Mtg Stool F35 1400 (54") 250 500 N/A C 207,416.04

54-6025-533325420 Mtg Stool F35 1500 (60") 250 500 N/A C 288,802.03

54-7225-533325420 Mtg Stool F35 1800 (72”) 250 500 N/A C 539,755.41

CTO

54-2425-543323420 Mtg Stool F25 600 (24") 250 500 N/A C 32,282.98

54-3025-543323420 Mtg Stool F25 750 (30") 250 500 N/A C 51,141.15

54-3625-543323420 Mtg Stool F25 900 (36") 250 500 N/A C 76,913.61

54-4825-543325420 Mtg Stool F35 1200 (48") 250 500 N/A C 201,504.96

54-5425-543325420 Mtg Stool F35 1400 (54") 250 500 N/A C 207,416.04

54-6025-543325420 Mtg Stool F35 1500 (60") 250 500 N/A C 288,802.03

54-7225-543325420 Mtg Stool F35 1800 (72”) 250 500 N/A C 539,755.41


actuator.






Series 54\2553, 54/2554 - BYPASS - (AWWA)Metal seated Gate ValveFlanges:-ANSI B16.1 CLASS 250 (UP TO 48")ANSI/AWWA C115 TABLE 2(54" TO 60")Ductile Iron Body, bonnet,wedge, - BS (AS536)Stainless Steel Gr 1.4057 StemWedge Nut Aluminium Bronze(CC331G)Stainless Steel Gr A4 (316)FastenersGunmetal Trim BS EN 1982CC491K/B62 C83600(seat rings and face rings): Epoxy coating Internally WRAS Approved


29

Gate valves

Price list 2014

AVK ref. DN ANSI Test Pressure Units Delivery Grossnumber mm (psi) (psi) pr. Pallet code Price GBP


CTC

54-2430-513323420 Mtg Stool F25 600 (24") 300 500 N/A C 31,038.07

54-3030-513323420 Mtg Stool F25 750 (30") 300 500 N/A C 49,902.66

54-4830-513325420 Mtg Stool F35 1200 (48") 300 500 N/A C 202,079.39

CTO

54-2430-523323420 Mtg Stool F25 600 (24") 300 500 N/A C 31,038.07

54-3030-523323420 Mtg Stool F25 750 (30") 300 500 N/A C 49,902.66

54-4830-523325420 Mtg Stool F35 1200 (48") 300 500 N/A C 202,079.39


actuator.






Series 54\3051, 54/3052 (AWWA)Metal seated Gate ValveFlanges:-ANSI B16.1 CLASS 250 (UP TO 48")Ductile Iron Body, bonnet,wedge, - BS (AS536)Stainless Steel Gr 1.4057 Stem Wedge Nut Aluminium Bronze(CC331G)Stainless Steel Gr A4 (316)FastenersGunmetal Trim BS EN 1982CC491K/B62 C83600(seat rings and face rings): Epoxy coating Internally WRASApproved

AVK ref. DN ANSI Test Pressure Bypass Delivery Grossnumber mm (psi) (psi) Dia code Price GBP


CTC

54-2430-533323420 Mtg Stool F25 600 (24") 300 500 4" C 32,531.96

54-3030-533323420 Mtg Stool F25 750 (30") 300 500 4" C 51,553.97

54-4830-533325420 Mtg Stool F35 1200 (48") 300 500 8" C 202,527.52

CTO

54-2430-543323420 Mtg Stool F25 600 (24") 300 500 4" C 32,531.96

54-3030-543323420 Mtg Stool F25 750 (30") 300 500 4" C 51,553.97

54-4830-543325420 Mtg Stool F35 1200 (48") 300 500 8" C 202,527.52

H&S Warning: Valves must not be operated without a gearbox or actuator. Thrust is taken in the gearbox oractuator. Gearbox/Electrical Actuation options available on requestShoes, Channels, Scraper, repacking under pressure are included as standardWP = Working Pressure, TP = Test PressureLNS number stated relates to standard ISO mounting flange. For Differential pressures of 145 psi and abovethe mounting flange and LNS number may change

Series 54\3053, 54/3054 - BYPASS - (AWWA)Metal seated Gate ValveFlanges:-ANSI B16.1 CLASS 250 (UPTO 48")Ductile Iron Body, bonnet,wedge, - BS (AS536)Stainless Steel Gr 1.4057 Stem Wedge Nut Aluminium Bronze(CC331G)Stainless Steel Gr A4 (316)FastenersGunmetal Trim BS EN 1982CC491K/B62 C83600(seat rings and face rings): Epoxy coating Internally and externally WRASApproved

AVK ref. DN PN Weight Operation Delivery Grossnumber mm class kg code Price GBP

41-050-22-0180106 50 16 12 LEVER/WEIGHT & GUARD C 650.55



41-150-22-0180106 150 16 37 LEVER/WEIGHT & GUARD C 1,268.03




Series 41/22 Rubber LinedResilient Seated Check valve with LEVER/WEIGHT & GUARD (RIGHT HANDSIDE)Rubber Disk (ESW70)Flange drilling to EN1092-2PN16Epoxy Coated to 300 MicronsStainless Steel Grade 1.4404ShaftStainless Steel Gr A4Fasteners


30

Price list 2014


41-050-39-0180106 50 16 12 FREE END C 683.28

41-080-39-0180106 80 16 16 FREE END C 643.23

41-100-39-0180106 100 16 21 FREE END C 794.86

41-150-39-0180106 150 16 37 FREE END C 1,201.96

41-200-39-0180106 200 16 69 FREE END C 2,092.31

41-250-39-0180106 250 16 132 FREE END C 4,968.15

41-300-39-0180106 300 16 187 FREE END C 6,298.39

Series 41/39 Gulf SpecificationMetal Seated Check valvewith Free Shaft EndGunmetal SeatFlange drilling to ISO 7007-2/ EN1092-2Epoxy CoatedStainless Steel Gr 316 s11ShaftStainless Steel Gr A4 (316)Fasteners


41-050-36-0180106 50 16 LEVER & WEIGHT C 776.56

41-080-36-0180106 80 16 LEVER & WEIGHT C 757.09

41-100-36-0180106 100 16 LEVER & WEIGHT C 980.25

41-150-36-0180106 150 16 LEVER & WEIGHT C 1,496.09

41-200-36-0180106 200 16 LEVER & WEIGHT C 2,193.94

41-250-36-0180106 250 16 LEVER & WEIGHT C 5,498.35

41-300-36-0180106 300 16 LEVER & WEIGHT C 6,688.92

Series 41/36 Gulf SpecificationMetal Seated Check valve with LEVER & WEIGHT (RIGHT HAND SIDE)Gunmetal SeatFlange drilling toISO 7007-2/ EN1092-2Epoxy CoatedStainless Steel Gr 316s11 ShaftStainless Steel Gr A4(316) Fasteners


41-050-39-0380106 50 16 12 FREE END C 751.61

41-080-39-0380106 80 16 16 FREE END C 707.56

41-100-39-0380106 100 16 21 FREE END C 874.35

41-150-39-0380106 150 16 37 FREE END C 1,322.15

41-200-39-0380106 200 16 69 FREE END C 2,304.54

41-250-39-0380106 250 16 132 FREE END C 5,646.96

41-300-39-0380106 300 16 187 FREE END C 6,928.23

Series 41/39 Kuwait SpecificationMetal Seated Check valve with Free Shaft EndGunmetal SeatFlange drilling to BS 10 TABLE 'E'Epoxy CoatedStainless Steel Gr 316 s11Shaft


41-050-36-0180166 50 16 LEVER/WEIGHT & GUARD C 1,128.70







Series 41/36 Gulf SpecificationMetal Seated Check valve with LEVER/WEIGHT &GUARD (RIGHT HAND SIDE)Gunmetal SeatFlange drilling toISO 7007-2/ EN1092-2Epoxy CoatedStainless Steel Gr 316s11 ShaftStainless Steel Gr A4(316) Fasteners


31

Price list 2014


41-050-36-0380106 50 16 LEVER & WEIGHT C 854.22

41-080-36-0380106 80 16 LEVER & WEIGHT C 832.80

41-100-36-0380106 100 16 LEVER & WEIGHT C 1,078.27

41-150-36-0380106 150 16 LEVER & WEIGHT C 1,645.70

41-200-36-0380106 200 16 LEVER & WEIGHT C 2,413.34

41-250-36-0380106 250 16 LEVER & WEIGHT C 6,048.19

41-300-36-0380106 300 16 LEVER & WEIGHT C 7,357.81

Series 41/36 Kuwait SpecificationMetal Seated Check valve, lever & weightGunmetal SeatFlange drilling to BS 10 TABLE 'E'Epoxy CoatedStainless Steel Gr 316 s11 ShaftStainless Steel Gr A4(316) Fasteners









Series 41/36 Kuwait SpecificationMetal Seated Check valve, lever, weight & guardGunmetal SeatFlange drilling to BS 10 TABLE 'E'Epoxy CoatedStainless Steel Gr 316s11 Shaft


41-350-39-0180000 350 16 312 1 C 8,302.20

41-400-39-0180000 400 16 373 1 C 10,228.31

41-450-39-0180000 450 16 531 1 C 14,504.78

41-500-39-0180000 500 16 738 1 C 19,043.13

41-600-39-0180000 600 16 928 1 C 23,054.68

Series 41/39Metal Seated Check valve with Free Shaft EndFace to facedimension to BS 5153Flange drilling toISO 7007-2/ EN1092-2Aluminium Bronze SeatStainless Steel GR420S37 ShaftEpoxy coated accordingto DIN 30677-2 andGSK ApprovedDN 350-600


41-350-36-0180000 350 16 337 1 C 8,619.67

41-400-36-0180000 400 16 449 1 C 10,779.04

41-450-36-0180000 450 16 578 1 C 15,096.70

41-500-36-0180000 500 16 806 1 C 19,870.68

41-600-36-0180000 600 16 995 1 C 23,885.62

Series 41/36 L & WMetal Seated Check valve with Lever & WeightFace to facedimension to BS 5153Flange drilling toISO 7007-2/ EN1092-2Aluminium BronzeSeatStainless Steel GR420S37 ShaftEpoxy coatedaccording to DIN 30677-2 andGSK ApprovedDN 350-600


32

Price list 2014


41-350-36-0180060 350 16 369 1 C 10,159.74

41-400-36-0180060 400 16 449 1 C 12,319.31

41-450-36-0180060 450 16 623 1 C 16,933.05

41-500-36-0180060 500 16 852 1 C 21,705.87

41-600-36-0180060 600 16 1058 1 C 25,720.11

Series 41/36 L&W&GMetal Seated Check valve with Lever & Weight &GuardFace to face dimensionto BS 5153Flange drilling toISO 7007-2/ EN1092-2Aluminium Bronze SeatStainless Steel Gr 420S37 ShaftEpoxy coated accordingto DIN 30677-2 andGSK ApprovedDN 350-600


41-350-39-0180106 350 16 312 1 C 8,900.27

41-400-39-0180106 400 16 373 1 C 10,798.34

41-450-39-0180106 450 16 531 1 C 15,599.51

41-500-39-0180106 500 16 738 1 C 20,192.85

41-600-39-0180106 600 16 928 1 C 24,319.68

Series 41/39 SS316 shaft Gulf SpecMetal Seated Check valve with Free Shaft EndFace to face dimension to BS 5153Flange drilling to ISO 7007-2/ EN1092-2Stainless Steel Gr 316 S11 ShaftAluminium Bronze SeatStainless Steel Gr A4FastenersEpoxy coated according toDIN 30677-2 andGSK Approved (300 Microns)DN 350-600


41-350-36-0180106 350 16 337 1 C 9,270.82

41-400-36-0180106 400 16 449 1 C 11,635.87

41-450-36-0180106 450 16 578 1 C 16,246.77

41-500-36-0180106 500 16 806 1 C 21,505.10

41-600-36-0180106 600 16 995 1 C 25,215.92

Series 41/36 L&W Gulf SpecMetal Seated Check valve with Lever & WeightFace to facedimension to BS 5153Flange drilling toISO 7007-2/ EN1092-2Stainless Steel Gr 316S11 ShaftAluminium Bronze SeatStainless Steel Gr A4 FastenersEpoxy coated according to DIN 30677-2 andGSK Approved (300 Microns)DN 350-600


41-350-36-0180166 350 16 369 1 C 10,842.60

41-400-36-0180166 400 16 449 1 C 12,981.37

41-450-36-0180166 450 16 623 1 C 18,122.68

41-500-36-0180166 500 16 852 1 C 22,954.59

41-600-36-0180166 600 16 1058 1 C 27,087.50

Series 41/36 L&W&G Gulf SpecMetal Seated Check valve with Lever & Weight &GuardFace to face dimension to BS 5153Flange drilling to ISO 7007-2/ EN1092-2Stainless Steel Gr 316 S11ShaftAluminium Bronze SeatStainless Steel Gr A4FastenersEpoxy coated accordingto DIN 30677-2 andGSK Approved (300 Microns)DN 350-600


33

Gate valves

Price list 2014


641-0700-01140000 700 16 2364 LEVER/WEIGHT C 44,446.50

641-0800-01140000 800 16 2782 LEVER/WEIGHT C 55,486.15

641-0900-01140000 900 16 3292 LEVER/WEIGHT C 59,076.92

641-1000-01140000 1000 16 3700 LEVER/WEIGHT C 72,858.46

Series 641/01 PN16Metal Seated Check valve LEVER & WEIGHT (LEFT HAND SIDE)Ductile Iron Body / CoverFlanges BS EN 1092-2Epoxy CoatedZinc Plated Mild Steel FastenersGunmetal Seat CC491KStainless Steel Gr 1.4057 SpindleLever: Mild SteelWeight: Cast Iron


641-0700-01100000 700 16 2220 FREE END C 42,806.00

641-0800-01100000 800 16 2770 FREE END C 53,547.69

641-0900-01100000 900 16 3200 FREE END C 57,138.46

641-1000-01100000 1000 16 3600 FREE END C 70,440.00

Series 641/01 PN16Metal Seated Check valve FREE END TYPEDuctile Iron Body / CoverFlanges BS EN 1092-2Epoxy CoatedZinc Plated Mild SteelFastenersGunmetal Seat CC491KStainless Steel Gr 1.4057 Spindle


British Standard BS EN 12334/BS 5153

641-0700-01160000 700 16 2400 LEVER/WEIGHT/GUARD C 48,271.50




If Proximity Switch required then LW&G option must be selected

Series 641/01 PN16Metal Seated Check valve LEVER, WEIGHT & GUARD (LEFT HAND SIDE)Ductile Iron Body / CoverFlanges BS EN 1092-2Epoxy CoatedZinc Plated Mild Steel FastenersGunmetal Seat CC491KStainless Steel Gr 1.4057SpindleLever: Mild SteelWeight: Cast IronGuard: Mild Steel


British Standard BS EN 12334/BS 5153 (Gulf Specification)

641-0700-02141000 700 16 2364 LEVER/WEIGHT C 45,934.00

641-0800-02141000 800 16 2782 LEVER/WEIGHT C 57,332.31

641-0900-02141000 900 16 3292 LEVER/WEIGHT C 60,923.08

641-1000-02141000 1000 16 TBC LEVER/WEIGHT C 74,935.38

Series 641/02 PN16 - Gulf SpecificationMetal Seated Check valve LEVER & WEIGHT (LEFT HAND SIDE)Ductile Iron Body / CoverFlanges BS EN 1092-2Epoxy Coated (300microns)Stainless Steel A4FastenersGunmetal Seat CC491KStainless Steel A4 Hinge PinLever: Mild SteelWeight: Cast Iron



641-0700-02101000 700 16 2220 FREE END C 44,293.50

641-0800-02101000 800 16 2770 FREE END C 55,393.85

641-0900-02101000 900 16 3200 FREE END C 58,984.62

641-1000-02101000 1000 16 TBC FREE END C 72,516.92

Series 641/02 PN16 - Gulf SpecificationMetal Seated Check valve FREE END TYPEDuctile Iron Body / CoverFlanges BS EN 1092-2Epoxy Coated (300Microns)Stainless Steel A4FastenersGunmetal Seat CC491KStianless Steel A4 Hinge Pin


34

Price list 2014






641-1000-02161000 1000 16 TBC LEVER/WEIGHT/GUARD C 80,935.38

If Proximity Switch required then LW&G option must be selected

Series 641/02 PN16 - Gulf SpecificationMetal Seated Check valve LEVER & WEIGHT (LEFT HAND SIDE)Ductile Iron Body / CoverFlanges BS EN 1092-2Epoxy Coated (300 Microns)Stainless Steel A4 FastenersGunmetal Seat CC491KStainless Steel A4 Hinge PinLever: Mild SteelWeight: Cast IronGuard: Mild Steel


British Standard BS EN 12334/BS 5153 (Kuwait - MEW Specification)

641-0700-02600000 700 16 2220 FREE END C 42,806.00

641-0800-02600000 800 16 2770 FREE END C 53,547.69

641-0900-02600000 900 16 3200 FREE END C 57,138.46

641-1000-02600000 1000 16 TBC FREE END C 70,440.00

Series 641/02 PN16 - Kuwait SpecificationMetal Seated Check valve FREE END TYPEDuctile Iron Body / CoverFlanges BS EN 1092-2TABLE EEpoxy CoatedStainless Steel Gr A4FastenersGunmetal Seat CC491KStianless Steel Gr A4 Hinge Pin


British Standard BS EN 12334/BS 5153 (Kuwait - MEW Specification)

641-0700-02640000 700 16 2364 LEVER/WEIGHT C 44,446.50

641-0800-02640000 800 16 2782 LEVER/WEIGHT C 55,486.15

641-0900-02640000 900 16 3292 LEVER/WEIGHT C 59,076.92

641-1000-02640000 1000 16 TBC LEVER/WEIGHT C 72,858.46

Series 641/02 PN16 - Kuwait SpecificationMetal Seated Check valve LEVER & WEIGHT (LEFT HAND SIDE)Ductile Iron Body / CoverFlanges BS EN 1092-2 TABLE EEpoxy CoatedStainless Steel Gr A4FastenersGunmetal Seat CC491KStianless Steel Gr A4Hinge PinLever: Mild SteelWeight: Cast Iron

AVK ref. DN PN Weight Doors Delivery Grossnumber mm class kg (Qty) code Price GBP

British Standard

Single Door Recoil Check Valve

641-0350-11100000 350 16 975 Single C 16,483.20

641-0400-11100000 400 16 1044 Single C 16,925.20

641-0450-11100000 450 16 1466 Single C 20,304.80

641-0500-11100000 500 16 2240 Single C 27,213.60

Series 641/11Recoil Non Slam MetalSeated Check ValveFlange drilling to EN1092-2(ISO7005-2) PN16Stainless Steel BS EN10088 Gr 1.4305Hinge PinZinc Plated Mild SteelFastenersEpoxy CoatedGunmetal Seat CC491K


641-0100-11-100050 100 16 86 4 C 2,989.55

641-0150-11-100050 150 16 148 1 C 4,715.05

641-0200-11-100050 200 16 280 1 C 6,985.09

641-0250-11-100050 250 16 430 1 C 10,049.24

641-0300-11-100050 300 16 601 1 C 13,287.28

Series 641/11Recoil Non Slam MetalSeated Check ValveFlange drilling to EN1092-2(ISO7005-2) PN16Grade 4057(AISI431) StemAluminium Bronze TrimCC331G8.8 Galvanized boltsEpoxy coated according to DIN 30677-2 and GSKApproved


35

Gate valves

Price list 2014


Gulf Specification


641-0350-12101000 350 16 975 Single C 18,169.60

641-0400-12101000 400 16 1044 Single C 19,291.60

641-0450-12101000 450 16 1466 Single C 22,174.80

641-0500-12101000 500 16 2240 Single C 29,083.60

Series 641/12 Gulf SpecificationRecoil Non Slam MetalSeated Check ValveFlange drilling to EN1092-2(ISO7005-2) PN16Stainless Steel A4Hinge PinStainless Steel Gr A4FastenersEpoxy Coated (300 Microns)Gunmetal Seat CC491K


641-0100-12-101050 100 16 86 4 C 3,850.24

641-0150-12-101050 150 16 148 1 C 5,624.83

641-0200-12-101050 200 16 280 1 C 8,176.43

641-0250-12-101050 250 16 430 1 C 11,240.24

641-0300-12-101050 300 16 601 1 C 14,799.03

Series 641/12 Gulf SpecificationRecoil Non Slam MetalSeated Check ValveFlange drilling to EN1092-2(ISO7005-2) PN16Grade SS A4 Stem, A4 boltsEpoxy coated accordingto DIN 30677-2 andGSK Approved (300 Microns)


British Standard

Multi Door Recoil Check Valve

641-0600-21100000 600 16 1950 2 C 51,909.08

641-0700-21100000 700 16 2500 2 C 58,826.50

641-0800-21100000 800 16 2700 2 C 62,014.27

641-0900-21100000 900 16 3600 3 C 83,427.77

641-1000-21100000 1000 16 4500 3 C 109,302.42

641-1200-21100000 1200 16 6800 3 C 142,730.70

641-1400-21100000 1400 16 TBC TBC C Price on request

Series 641/21Recoil Non Slam MetalSeated Check ValveFlange drilling to EN1092-2(ISO7005-2) PN16Stainless Steel BS EN10088 Gr 1.4401Hinge PinZinc Plated Mild SteelFastenersEpoxy CoatedGunmetal Seat CC491K


641-0100-13-700050 100 25 86 4 C 3,167.02

641-0150-13-700050 150 25 154 1 C 4,735.22

641-0200-13-700050 200 25 290 1 C 7,102.83

641-0250-13-700050 250 25 447 1 C 10,147.09

641-0300-13-700050 300 25 612 1 C 13,212.91

Series 641/13Recoil Non Slam MetalSeated Check ValveFlange drilling to EN1092-2(ISO7005-2) PN25Grade 4057(AISI431) Stem8.8 Galvanized bolts Epoxy coated accordingto DIN 30677-2 andGSK Approved


Gulf Specification


641-0600-22101000 600 16 1950 2 C 54,304.71

641-0700-22101000 700 16 2500 2 C 66,917.20

641-0800-22101000 800 16 2700 2 C 70,104.97

641-0900-22101000 900 16 3600 3 C 91,838.98

641-1000-22101000 1000 16 4500 3 C 120,650.19

641-1200-22101000 1200 16 6800 3 C 158,470.32

641-1400-22101000 1400 16 TBC TBC C Price on request

Series 641/22 Gulf SpecificationRecoil Non Slam MetalSeated Check ValveFlange drilling to EN1092-2(ISO7005-2) PN16Stainless Steel A4Hinge PinStainless Steel Gr A4FastenersEpoxy CoatedGunmetal Seat CC491K


36

Price list 2014


British Standard


641-0350-13700000 350 25 975 Single C 21,863.95

641-0400-13700000 400 25 1044 Single C 22,427.01

641-0450-13700000 450 25 1466 Single C 26,948.79

641-0500-13700000 500 25 2240 Single C 35,749.81

Series 641/13Recoil Non Slam MetalSeated Check ValveFlange drilling to EN1092-2(ISO7005-2) PN25Stainless Steel BS EN10088 Gr 1.4057Hinge PinZinc Plated Mild Steel FastenersEpoxy CoatedGunmetal Seat CC491K


British Standard


641-0600-23700000 600 25 1950 2 C Price on request




Series 641/23Recoil Non Slam MetalSeated Check ValveFlange drilling to EN1092-2(ISO7005-2) PN25Stainless Steel BS EN10088 Gr 1.4057Hinge PinZinc Plated Mild Steel FastenersEpoxy CoatedGunmetal Seat CC491K


641-0100-14-701050 100 25 86 4 C 4,557.51

641-0150-14-701050 150 25 154 1 C 6,551.11

641-0200-14-701050 200 25 290 1 C 9,703.01

641-0250-14-701050 250 25 447 1 C 13,258.15

641-0300-14-701050 300 25 612 1 C 17,040.56

Series 641/14 Gulf SpecificationRecoil Non Slam MetalSeated Check ValveFlange drilling to EN1092-2(ISO7005-2) PN25Grade SS A4 Stem, A4 boltsEpoxy coated accordingto DIN 30677-2 andGSK Approved (300 Microns)


851-025-00-822000 25 16 6.1 100 C 243.70

Series 851/00 TaperSingle Small Orifice Air ValveInlet to 1" BSP Female ThreadBody and cover: Ductile IronInternals: ABS PlasticEpoxy Coated according toDIN 30677-2 and GSK Approved (300 Microns)A4 Fasteners


851-025-20-822000 25 16 2.4 120 C 121.78

Series 851/20 TaperSingle Large Orifice Air Relief ValveInlet to 1" BSP Female ThreadBody and cover: Ductile IronInternals: ABS PlasticBolts: A4 stainless steelEpoxy Coated according toDIN 30677-2 and GSK Approved(300 Microns)


37

Gate valves

Price list 2014


851-050-20-122001 50 16 23.9 12 C 751.62

851-080-20-122001 80 16 36.7 10 C 1,076.40

851-100-20-122001 100 16 63.7 6 C 1,622.30

851-150-20-122001 150 16 65.9 6 C 1,623.30

Series 851/20 Vented Non ReturnAPEX Dual Function Air ValveWith Vent None-return ValveFlanges To EN 1092 (PN 16)Body and cover: Ductile ironInternals: ABS plasticBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


851-050-20-122000 50 16 21 12 C 575.30

851-080-20-122000 80 16 32 10 C 884.76

851-100-20-122000 100 16 53 6 C 1,363.08

851-150-20-122000 150 16 73 6 C 1,445.29

851-200-20-122000 200 16 4 C 1,517.55

Series 851/20 APEX Dual Function Air ValveFlanges To EN 1092 (PN 16)Body and cover: Ductile ironInternals: ABS plasticBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


851-050-20-122002 50 16 24 12 C 745.97

851-080-20-122002 80 16 37 10 C 1,073.56

851-100-20-122002 100 16 64 6 C 1,607.54

851-150-20-122002 150 16 66 6 C 1,609.38

Series 851/20 Inflow Check ValveAPEX Dual Function Air ValveWith Inflow Check ValveFlanges To EN 1092 Body and cover: Ductile ironInternals: ABS plasticBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


851-050-20-122005 50 16 15 10 C 781.56

851-100-20-122005 100 16 35 9 C 1,509.74

851-150-20-122005 150 16 38 6 C 1,345.36

Series 851/20 Pipe OutletAPEX Dual Function Air ValveWith Flange for Pipe OutletFlanges To EN 1092 (PN25)Body and cover: Ductile ironInternals: ABS plasticBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


851-050-25-122000 50 16 21 12 C 781.63

851-080-25-122000 80 16 32 10 C 1,146.26

851-100-25-122000 100 16 52 6 C 1,748.73

851-150-25-122000 150 16 73 6 C 1,721.40

Series 851/25 Stainless Steel InternalsAPEX Dual Function Air ValveFlanges To EN 1092 (PN 16)Body and cover: Ductile ironInternals: SS316 except Float to ABSBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


38

Price list 2014


851-050-15-722000 50 25 21 12 C 945.48

851-080-15-722000 80 25 32 10 C 1,566.35

851-100-15-722000 100 25 52 6 C 2,118.05

851-150-15-722000 150 25 73 6 C 2,297.38

Series 851/15 PN25 Stainless Steel InternalsAPEX Dual Function Air ValveFlanges To EN 1092 (PN 25)Body and cover: Ductile ironInternals:SS316Bolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


851-050-10-722000 50 25 19.8 12 C 566.40

851-080-10-722000 80 25 31.7 10 C 980.24

851-100-10-722000 100 25 51.7 6 C 1,363.47

851-150-10-722000 150 25 72.7 6 C 1,553.22

Series 851/10 PN25 ABS Plastic InternalsAPEX Dual Function Air ValveFlanges To EN 1092 (PN 25)Body and cover: Ductile ironInternals: ABS plasticBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


851-050-25-622000 50 16 21 12 C 759.11

851-080-25-622000 80 16 32 10 C 1,131.42

851-100-25-622000 100 16 52 6 C 1,679.58

851-150-25-622000 150 16 73 6 C 1,721.40

Series 851/25 Kuwait SpecAPEX Dual Function Air ValveFlanges To EN 1092 (TABLE E)Body and cover: Ductile ironInternals: SS316 except Float to ABSBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


851-050-28-122000 50 16 21 12 C 974.75

851-080-28-122000 80 16 32 10 C 1,487.29

851-100-28-122000 100 16 52 6 C 2,118.05

851-150-28-122000 150 16 73 6 C 2,192.03

Series 851/28APEX Dual Function Air ValveFlanges To EN 1092 (PN 16)Body and cover: Ductile ironInternals: SS316Bolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


851-050-10-722001 50 25 23.9 12 C 732.02

851-080-10-722001 80 25 36.7 10 C 1,080.09

851-100-10-722001 100 25 63.1 6 C 1,619.79

851-150-10-722001 150 25 65.9 6 C 1,823.28

Series 851/10 PN25 Vented Non ReturnAPEX Dual Function Air ValveWith Vent None-return ValveFlanges To EN 1092 (PN 25)Body and cover: Ductile ironInternals: ABS plasticBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


39

Gate valves

Price list 2014


851-050-10-722002 50 25 24 12 C 737.21

851-080-10-722002 80 25 37 10 C 1,076.66

851-100-10-722002 100 25 64 6 C 1,610.65

851-150-10-722002 150 25 66 6 C 1,715.20

Series 851/10 ICVAPEX Dual Function Air ValveWith Inflow Check ValveFlanges To EN 1092 (PN 25)Body and cover: Ductile ironInternals: ABS plasticBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


851-050-10-722005 50 25 15 10 C 782.66

851-100-10-722005 100 25 35 9 C 1,545.63

851-150-10-722005 150 25 38 6 C 1,464.86

Series 851/10 Pipe OutletAPEX Dual Function Air ValveWith Flange for Pipe OutletFlanges To EN 1092 (PN25)Body and cover: Ductile ironInternals: ABS plasticBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


851-050-40-111000 50 10 12 C 529.84

851-080-40-111000 80 10 10 C 582.25

851-100-40-111000 100 10 6 C 730.75

851-150-40-111000 150 10 6 C 1,046.84

851-200-40-011000 200 10 4 C 1,076.95

Series 851/40APEX Dual Function Air Valve DN50-DN200APEX Single Function Air Valve DN25Flanges to EN 1092 (PN10/16)Body and cover: Ductile IronInternals: ABS PlasticBolts: A2 stainless steelEpoxy coated according toDIN30677-2


851-050-48-122000 50 16 12 C 925.80

851-080-48-122000 80 16 10 C 1,155.29

851-100-48-122000 100 16 6 C 1,486.13

851-150-48-122000 150 16 6 C 1,809.49

851-200-48-122000 200 16 4 C 1,840.08

Series 851/48APEX Dual Function Air Valve DN50-DN200Flanges to EN 1092 (PN10/16)Body and cover: Ductile IronInternals: Stainless Steel Grade1.4404/1.4432Bolts: A4 stainless steelEpoxy coated according toDIN30677-2 300Microns


851-080-50-122000 80 16 210 2 C 6,476.85

Series 851/50EPEX Dual Function Air ValveFlanges To EN 1092 Body and cover: Ductile ironInternals: ABS plasticBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


40

Price list 2014


756-0200-2-04018014 200 10 47 6 C 1,595.31

756-0200-2-14018014 200 16 47 6 C 1,595.31

756-0250-2-04018014 250 10 64 4 C 1,861.16

756-0250-2-14018014 250 16 64 4 C 1,861.16

756-0300-2-04018014 300 10 91 2 C 2,350.92

756-0300-2-14018014 300 16 97 2 C 2,551.51

756-0350-2-04018014 350 10 115 1 C 2,778.62

756-0350-2-14018014 350 16 121 1 C 2,929.69

756-0400-2-04018014 400 10 153 1 C 3,383.46

756-0400-2-14018014 400 16 153 1 C 3,383.46

756-0450-2-04018014 450 10 193 1 C 4,590.86

756-0450-2-14018014 450 16 201 1 C 4,671.72

756-0500-2-04018014 500 10 180 1 C 4,281.31

756-0500-2-14018014 500 16 156 1 C 5,518.69

756-0600-2-04018014 600 10 262 1 C 5,640.83

756-0600-2-14018014 600 16 394 1 C 8,451.49

Series 756/2Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 13IP 67 Manual gear EPDM sealingsIntegral SeatStandard flange drill ToEN1092-2Mild Steel RetainingRingSS 1.4021 ShaftsEpoxy coatedaccording to DIN30677-2 andGSK & WRAS ApprovedClosing direction: CTCDN200-600Optional:S.S. Body Seat, Seal Retain Ring,SS431, SS316, or Duplex S.S. ShaftIP68 Manual GearIP67 Gear with ISO Flange


851-150-20-122010 150 16 169 2 C 3,810.46

851-200-20-122010 200 16 259 1 C 5,828.07

851-250-20-122010 250 16 340 1 C 7,252.25

Series 851/20 Vented Non Return ClusterCluster APEX Dual Function Air ValveWith VNRFlanges To EN 1092 (PN16)Body and cover: Ductile ironInternals: ABS plasticBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


851-150-20-122004 150 16 145 2 C 3,607.44

851-200-20-122004 200 16 223 1 C 6,055.96

851-250-20-122004 250 16 292 1 C 7,617.70

Series 851/20Cluster APEX Dual Function Air ValveFlanges To EN 1092 (PN16)Body and cover: Ductile ironInternals: ABS plasticBolts: A4 stainless steelEpoxy coated according to DIN 30677-2 and GSK Approved(300Microns)


756-0700-1-1430202241 700 16 523 1 C 29,324.62

756-0800-1-1430202241 800 16 669 1 C 34,968.98

756-0900-1-1430202241 900 16 881 1 C 43,973.58

756-1000-1-1430202241 1000 16 1120 1 C 55,848.25

756-1200-1-1430202241 1200 16 1683 1 C 72,779.42

Series 756/1Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 14IP 67 ISO GEARBOXEPDM sealingsIntegral SeatStandard flange drill ToEN1092-2 PN16Duplex Steel Grade1.4462 ShaftsEpoxy coated to 300micronsADWEA Spec ValveClosing direction: CTCDUPLEX Steel Retaining Ring Grade1.4462/1.4470/1.4517)SS Grade A4 FastenersSelf Locking DeviceC/W Handwheel


41

Gate valves

Price list 2014


756-0700-1-1430207 700 16 523 1 C 30,190.16

756-0800-1-1430207 800 16 669 1 C 35,785.80

756-0900-1-1430207 900 16 881 1 C 44,395.70

756-1000-1-1430207 1000 16 1120 1 C 55,516.26

756-1200-1-1430207 1200 16 1683 1 C 71,833,28

Series 756/1Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 14IP 67 ISO GEARBOXEPDM sealingsStandard flange drill ToEN1092-2 PN16Stainless Steel Grade1.4401/1.4404 ShaftsEpoxy coated to 300micronsStainless SteelRetaining Ring Grade1.4404Stainless Steel Seat Grade 1.4401/1.4404Closing direction: CTCSS Grade A4 FastenersC/W Handwheel


756-0700-1-1430007 700 16 523 1 C 25,583.93

756-0800-1-1430007 800 16 669 1 C 31,352.10

756-0900-1-1430007 900 16 881 1 C 38,866.49

756-1000-1-1430007 1000 16 1120 1 C 47,274.11

756-1200-1-1430007 1200 16 1683 1 C 65,830.33

Series 756/1Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 14IP 67 ISO GEARBOXEPDM sealingsStandard flange drill ToEN1092-2 PN16Stainless Steel Grade1.4401/1.4404 ShaftsEpoxy coated to 300micronsStainless SteelRetaining Ring Grade1.4404Stainless Steel Seat Grade 1.4401/1.4404Closing direction: CTCSS Grade A4 FastenersC/W Handwheel


756-0700-1-1430201 700 16 523 1 C 21,437.15

756-0800-1-1430201 800 16 669 1 C 25,398.64

756-0900-1-1430201 900 16 881 1 C 32,617.14

756-1000-1-1430201 1000 16 1120 1 C 41,065.22

756-1200-1-1430201 1200 16 1683 1 C 55,129.78

Series 756/1Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 14IP 67 ISO GEARBOXEPDM sealingsStandard flange drill ToEN1092-2 PN16Stainless Steel Grade1.4057 ShaftsEpoxy coated to 300micronsEpoxy Coated MildSteel Retaining RingClosing direction: CTCSS Grade A2 FastenersC/W Handwheel


42

Price list 2014


756-0700-1-1430009 700 16 523 1 C 18,829.75

756-0800-1-1430009 800 16 669 1 C 23,314.41

756-0900-1-1430009 900 16 881 1 C 29,753.41

756-1000-1-1430009 1000 16 1120 1 C 36,182.09

756-1200-1-1430009 1200 16 1683 1 C 52,531.61

Series 756/1Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 14IP 67 Manual GEARBOXEPDM sealingsStainless Steel Grade1.4021/1/4301 SeatStandard flange drill ToEN1092-2 PN16Stainless Steel Grade1.4057 ShaftsEpoxy coated to 300micronsStainless Steel Retaining Ring Grade 1.4021/1.4301Closing direction: CTCSS Grade A2 FastenersC/W Handwheel


756-0700-1-0430009 700 10 444 1 C 16,569.01

756-0800-1-0430009 800 10 592 1 C 19,173.98

756-0900-1-0430009 900 10 751 1 C 25,904.12

756-1000-1-0430009 1000 10 995 1 C 31,428.27

756-1200-1-0430009 1200 10 1449 1 C 40,373.94

Series 756/1Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 14IP 67 Manual GEARBOXEPDM sealingsStainless Steel Grade1.4021/1/4301 SeatStandard flange drill ToEN1092-2 PN10Stainless Steel Grade1.4057 ShaftsEpoxy coated to 300micronsStainless Steel Retaining Ring Grade 1.4021/1.4301Closing direction: CTCSS Grade A2 FastenersC/W Handwheel


756-0700-1-1430209 700 16 523 1 C 23,435.91

756-0800-1-1430209 800 16 669 1 C 27,748.17

756-0900-1-1430209 900 16 881 1 C 35,282.69

756-1000-1-1430209 1000 16 1120 1 C 44,424.23

756-1200-1-1430209 1200 16 1683 1 C 58,534.57

Series 756/1Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 14IP 67 ISO GEARBOXEPDM sealingsStainless Steel Grade1.4021/1/4301 SeatStandard flange drill ToEN1092-2 PN16Stainless Steel Grade1.4057 ShaftsEpoxy coated to 300micronsStainless Steel Retaining Ring Grade 1.4021/1.4301Closing direction: CTCSS Grade A2 FastenersC/W Handwheel


43

Gate valves

Price list 2014


756-0700-1-04018014 700 10 444 1 C 12,682.16

756-0700-1-14018014 700 16 523 1 C 15,228.86

756-0800-1-04018014 800 10 592 1 C 15,686.48

756-0800-1-14018014 800 16 669 1 C 17,833.65

756-0900-1-04018014 900 10 751 1 C 19,835.52

756-0900-1-14018014 900 16 881 1 C 22,732.30

756-1000-1-04018014 1000 10 995 1 C 24,017.14

756-1000-1-14018014 1000 16 1120 1 C 27,466.15

756-1200-1-04018014 1200 10 1449 1 C 32,925.60

756-1200-1-14018014 1200 16 1683 1 C 41,493.87

Series 756/1Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 14IP 67 Manual gearEPDM sealingsIntegral SeatStandard flange drillTo EN1092-2Mild Steel RetainingRingSS 1.4021 ShaftsEpoxy coatedaccording to DIN30677-2 and GSK ApprovedClosing direction: CTCOptional:SS 420 OR SS316 BODY SEATSS420 OR SS316 SEAL RETAIN RINGA4 FASTENERSIP68 MANUAL GEARIP67 GEAR WITH ISO FLANGE


756-0700-1-0430209 700 10 444 1 C 17,264.53

756-0800-1-0430209 800 10 592 1 C 24,848.86

756-0900-1-0430209 900 10 751 1 C 30,145.92

756-1000-1-0430209 1000 10 995 1 C 34,158.00

756-1200-1-0430209 1200 10 1449 1 C 49,027.19

Series 756/1Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 14IP 67 ISO GEARBOXEPDM sealingsStainless Steel Grade1.4021/1/4301 SeatStandard flange drill ToEN1092-2 PN10Stainless Steel Grade1.4057 ShaftsEpoxy coated to 300micronsStainless Steel Retaining Ring Grade 1.4021/1.4301Closing direction: CTCSS Grade A2 FastenersC/W Handwheel


756-0700-1-74018014 700 25 602 1 C 25,506.01

756-0800-1-74018014 800 25 808 1 C 31,042.41

756-0900-1-74018014 900 25 1064 1 C 37,154.49

756-1000-1-74018014 1000 25 1361 1 C 44,855.70

756-1200-1-74018014 1200 25 2088 1 C 64,793.70

Series 756/1Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 14Manual Gear Handwheel OperatedEPDM SealingsIntegral SeatMild Steel, EP CoatedRetaining RingStainless SteelShaft1.4021Standard Flange Drillto EN1092-2 PN25Epoxy Coatedaccoridng to DIN 30677-2GSK ApprovedClosing Direction: CTC


44

Price list 2014


756-0700-1-74012014 700 25 602 1 C 28,991.77

756-0800-1-74012014 800 25 808 1 C 41,381.92

756-0900-1-74012014 900 25 1064 1 C 47,494.07

756-1000-1-74012014 1000 25 1361 1 C 55,195.28

756-1200-1-74012014 1200 25 2088 1 C 76,323.95

Series 756/1Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 14G'BOX WITH ISO MTG FLANGE (IP67)EPDM SealingsIntegral SeatMild Steel, EP CoatedRetaining RingStainless SteelShaft1.4021Standard Flange Drillto EN1092-2 PN25Epoxy Coatedaccoridng to DIN 30677-2 GSK ApprovedClosing Direction: CTCHANDHWEEL NOT INCLUDED


756-0700-2-04018014 700 10 410 1 C 12,090.50

756-0700-2-14018014 700 16 483 1 C 14,053.89

756-0800-2-04018014 800 10 545 1 C 14,305.61

756-0800-2-14018014 800 16 665 1 C 15,314.43

756-0900-2-04018014 900 10 685 1 C 17,688.60

756-0900-2-14018014 900 16 804 1 C 19,572.75

756-1000-2-04018014 1000 10 932 1 C 22,959.03

756-1000-2-14018014 1000 16 1102 1 C 23,955.41

756-1200-2-04018014 1200 10 1352 1 C 31,162.71

756-1200-2-14018014 1200 16 1647 1 C 37,984.62

Series 756/2Double Eccentric Butterfly Valve, Plate DiskFace To Face To EN558-1 Series 13IP 67 Manual gearEPDM sealingsIntegral SeatStandard flange drillTo EN1092-2Mild Steel RetainingRingSS 1.4021 ShaftsEpoxy coatedaccording to DIN30677-2 and GSK ApprovedClosing direction: CTCOptional:SS 420 OR SS316 BODY SEATSS420 OR SS316 SEAL RETAIN RINGSS 431, SS316 OR DUPLEX SS SHAFTA4 FASTENERSIP68 MANUAL GEARIP67 GEAR WITH ISO FLANGE


756-0700-3-04018014 700 10 453 1 C 12,500.32

756-0700-3-14018014 700 16 510 1 C 15,152.72

756-0800-3-04018014 800 10 609 1 C 15,608.05

756-0800-3-14018014 800 16 663 1 C 16,608.25

756-0900-3-04018014 900 10 767 1 C 19,499.52

756-0900-3-14018014 900 16 872 1 C 22,397.64

756-1000-3-04018014 1000 10 1010 1 C 23,897.06

756-1000-3-14018014 1000 16 1107 1 C 26,758.38

756-1200-3-04018014 1200 10 1450 1 C 32,760.97

756-1200-3-14018014 1200 16 1631 1 C 40,717.45

756-0700-4-04018014 700 10 419 1 C 12,030.05

756-0700-4-14018014 700 16 470 1 C 13,983.62

756-0800-4-04018014 800 10 562 1 C 14,145.65

756-0800-4-14018014 800 16 659 1 C 15,237.86

756-0900-4-04018014 900 10 701 1 C 16,704.35

756-0900-4-14018014 900 16 795 1 C 19,474.88

756-1000-4-04018014 1000 10 947 1 C 22,844.23

756-1000-4-14018014 1000 16 1089 1 C 23,835.63

756-1200-4-04018014 1200 10 1353 1 C 31,006.89

756-1200-4-14018014 1200 16 1595 1 C 37,794.69

Series 756/3Double Eccentric Butterfly Valve, Flow Through DiskFace To Face To EN558-1 Series 14IP 67 Manual gear EPDM sealingsIntegral SeatStandard flange drill ToEN1092-2Mild Steel RetainingRingSS 1.4021 ShaftsEpoxy coatedaccording to DIN30677-2 andGSK ApprovedClosing direction: CTCOptional:SS BODY SEAT, SEAL RETAIN RINGSS431, SS316 OR DUPLEX SS SHAFTIP68 MANUAL GEARIP67 GEAR WITH ISO FLANGE


45

Gate valves

Price list 2014


756-0700-1-1400006 700 16 523 1 C 21,437.06

756-0800-1-1400006 800 16 669 1 C 26,513.44

756-0900-1-1400006 900 16 881 1 C 33,205.05

756-1000-1-1400006 1000 16 1120 1 C 39,874.21

756-1200-1-1400006 1200 16 1683 1 C 58,365.29

Series 756/1KUWAIT MARKET - Manual OperationDouble Eccentric Long Patternbutterfly valve,Plate disk Face To Face To EN558-1 Series 14Manual gearHandwheel Op. EPDM sealingsStainless Steel BodyRingMild Steel, EP CoatedRetaining RingStandard flange drillTo EN1092-2Epoxy coated according to DIN30677-2 and GSK ApprovedClosing direction: CTC


756-0700-1-1400206 700 16 523 1 C 25,997.25

756-0800-1-1400206 800 16 669 1 C 30,902.83

756-0900-1-1400206 900 16 881 1 C 38,679.06

756-1000-1-1400206 1000 16 1120 1 C 48,033.97

756-1200-1-1400206 1200 16 1683 1 C 64,308.23

Series 756/1KUWAIT MARKET - ISO MountDouble Eccentric Long Patternbutterfly valve,Plate disk Face To Face To EN558-1 Series 14IP 67 Manual gear EPDM sealingsStainless Steel BodyRingMild Steel, EP CoatedRetaining RingStandard flange drillTo EN1092-2Epoxy coatedaccording to DIN30677-2 and GSK ApprovedClosing direction: CTC

AVK ref. DN PN Weight Seat Delivery Grossnumber mm class kg Type code Price GBP

British Standard BS EN 593/German Standard DIN EN 593

Double Flanged Butterfly Valve - INTEGRAL SEAT - Price excludes Worm Gearbox

756-1400-1-1409110 1400 16 2252 INTEGRAL C 36,720.00

756-1500-1-1409110 1500 16 2781 INTEGRAL C 41,633.49

756-1600-1-1409110 1600 16 3248 INTEGRAL C 48.621.94

756-1800-1-1409110 1800 16 3955 INTEGRAL C 55,388.91

756-2000-1-1409110 2000 16 5465 INTEGRAL C 75,823.89

756-2200-1-1409110 2200 16 TBA INTEGRAL C 106,429.71

756-2400-1-1409110 2400 16 TBA INTEGRAL C 143,901.60

*for Gearbox/Actuator Options, on request

Valves must be supplied with Gearbox/Actuators Fitted

The gearbox is on the righthand side of the valve when looking in the direction of flow

Any variation requires a different part no. & must be clear to sales dept at time of order

NOTE: SHORT PATTERN (Series 13) AVAILABLE ON REQUEST

Series 756/1INTEGRAL SEAT PN16 LONGDouble Eccentric Long Patternbutterfly valve,Plate diskFace To Face To EN558-1 Series 14Suitable for Gearbox / Electric Actuator mount(NOT INCLUDED - AVAILBLE ON REQUEST)EPDM sealingsStainless Steel Retaining RingStainless Steel AISI 431 SpindleStandard flange drillTo EN1092-2Epoxy coated


46

Price list 2014




756-1400-1-040851 1400 10 2066 INTEGRAL C 35,414.40

756-1500-1-040851 1500 10 2522 INTEGRAL C 39,267.09

756-1600-1-040851 1600 10 2967 INTEGRAL C 45,363.77

756-1800-1-040851 1800 10 3574 INTEGRAL C 51,874.29

756-2000-1-040851 2000 10 5065 INTEGRAL C 72,181.03

756-2200-1-040851 2200 10 6244 INTEGRAL C 101,475.43






Series 756/1INTEGRAL SEAT PN10 LONGDouble Eccentric Long Patternbutterfly valve,Plate diskFace To Face To EN558-1 Series 14Suitable for Gearbox / Electric Actuator mount(NOT INCLUDED - AVAILBLE ON REQUEST)EPDM sealingsStainless Steel RetainingRingStainless Steel AISI 431SpindleStandard flange drillTo EN1092-2Epoxy coated



Double Flanged Butterfly Valve - STAINLESS STEEL SEAT - Price excludes Worm Gearbox

756-1400-1-1409119 1400 16 2252 STAINLESS STEEL C 39,634.29





756-2200-1-1409119 2200 16 TBA STAINLESS STEEL C 114,135.09







Series 756/1STAINLESS STEEL SEAT PN16 LONGDouble Eccentric Long Patternbutterfly valve,Plate diskFace To Face To EN558-1 Series 14Suitable for Gearbox / Electric Actuator mount(NOT INCLUDED - AVAILBLE ON REQUEST)EPDM sealingsStainless Steel Retaining RingStainless Steel AISI 431SpindleStandard flange drillTo EN1092-2Epoxy coated















Series 756/1STAINLESS STEEL SEAT PN10 LONGDouble Eccentric Long Patternbutterfly valve,Plate diskFace To Face To EN558-1 Series 14Suitable for Gearbox / Electric Actuator mount(NOT INCLUDED - AVAILBLE ON REQUEST)EPDM sealingsStainless Steel RetainingRingStainless Steel AISI 431SpindleStandard flange drillTo EN1092-2Epoxy coated


47

Gate valves

Price list 2014


British Standard BS EN 593/German Standard DIN EN 593 (Gulf Specification)


756-1400-1-1439114 1400 16 2252 INTEGRAL C 41,965.71

756-1500-1-1439114 1500 16 2781 INTEGRAL C 44,926.63

756-1600-1-1439114 1600 16 3248 INTEGRAL C 52,136.57

756-1800-1-1439114 1800 16 3955 INTEGRAL C 59,340.69

756-2000-1-1439114 2000 16 5465 INTEGRAL C 80,218.63

756-2200-1-1439114 2200 16 TBA INTEGRAL C 111,319.89

756-2400-1-1439114 2400 16 TBA INTEGRAL C 149,176.46






Series 756/1INTEGRAL SEAT PN16 LONG - GSDouble Eccentric Long Patternbutterfly valve,Plate diskFace To Face ToEN558-1 Series 14Suitable for Gearbox /Electric Actuator mount(NOT INCLUDED -AVAILBLE ON REQUEST)EPDM sealingsStainless Steel AISI 316 Retaining RingStainless Steel AISI 316 SpindleStandard flange drillTo EN1092-2 Epoxy coated




756-1400-1-0438114 1400 10 2068 INTEGRAL C 40,689.26

756-1500-1-0438114 1500 10 2522 INTEGRAL C 42,560.23

756-1600-1-0438114 1600 10 2967 INTEGRAL C 48,878.40

756-1800-1-0438114 1800 10 3574 INTEGRAL C 55,826.06

756-2000-1-0438114 2000 10 5065 INTEGRAL C 76,575.77

756-2200-1-0438114 2200 10 6244 INTEGRAL C 106,365.60






NOTE: THE ABOVE LNS IS SUITABLE FOR 6BAR UBWP. IF REQUIRE 10BAR UBWP PLEASE CONTACT

GLENFIELD SALES DEPT.

Series 756/1INTEGRAL SEAT PN10 LONG - GSDouble Eccentric Long Patternbutterfly valve,Plate diskFace To Face ToEN558-1 Series 14Suitable for Gearbox / ElectricActuator mount(NOT INCLUDED - AVAILBLEON REQUEST)EPDM sealingsStainless Steel AISI 316 Retaining RingStainless Steel AISI 316 SpindleStandard flange drill To EN1092-2Epoxy coated
















Series 756/1STAINLESS STEEL SEAT PN16 LONG - GSDouble Eccentric Long Patternbutterfly valve,Plate diskFace To Face ToEN558-1 Series 14Suitable for Gearbox / ElectricActuator mount(NOT INCLUDED - AVAILBLEON REQUEST)EPDM sealingsStainless Steel AISI 316 Retaining RingStainless Steel AISI 316 SpindleStandard flange drill To EN1092-2Epoxy coated


48

Price list 2014















Series 756/1STAINLESS STEEL SEAT PN10 LONG - GSDouble Eccentric Long Patternbutterfly valve,Plate diskFace To Face ToEN558-1 Series 14Suitable for Gearbox / ElectricActuator mount(NOT INCLUDED - AVAILBLEON REQUEST)EPDM sealingsStainless Steel AISI 316 Retaining RingStainless Steel AISI 316 SpindleStandard flange drillTo EN1092-2Epoxy coated

AVK ref. DN PN Weight Units Delivery Grossnumber mm class kg per Pallet code Price GBP

910-0050-21-011020004 50 16 9.1 20 C 207.67

910-0065-21-011020004 65 16 12 20 C 243.49

910-0080-21-011020004 80 16 16 12 C 282.46

910-0100-21-011020004 100 16 22 9 C 350.95

910-0125-21-011020004 125 16 33 6 C 459.84

910-0150-21-011020004 150 16 42 6 C 585.15

910-0200-21-011020004 200 16 80 4 C 994.90

910-0250-21-011020004 250 16 116 2 C 1,451.79

910-0300-21-011020004 300 16 172 1 C 2,059.33

Series 910 (New Product)Y-STRAINERFlange drilling to EN1092-2 PN16DN50-150 Face to Face to EN558-2basic series 4DN200-300 Face toface to EN558-2basic series 7Body, Cap : DuctileIron 500/7Screen: AISI304Optional: Mild Steel Zinc Plated ScreenEpoxy Coated according toDIN 30677-2 and GSK Approved

AVK ref. DN PN Weight Units Delivery Grossnumber mm class kg per Pallett code Price GBP

910-0050-11-111020004 50 25 9.1 20 C 228.45

910-0065-11-111020004 65 25 12 20 C 282.68

910-0080-11-111020004 80 25 16 12 C 339.52

910-0100-11-111020004 100 25 22 9 C 430.08

910-0125-11-111020004 125 25 33 6 C 587.26

910-0150-11-111020004 150 25 42 6 C 746.42

910-0200-11-111020004 200 25 80 4 C 1,241.49

910-0250-11-111020004 250 25 116 2 C 1,955.78

910-0300-11-111020004 300 25 172 1 C 2,743.26

Series 910 (New Product)Y-STRAINERFlange drilling to EN1092-2 PN25DN50-150 Face to Face to EN558-2basic series 4DN200-300 Face toface to EN558-2basic series 7Body, Cap : DuctileIron 500/7Screen: AISI304Optional: Mild Steel Zinc Plated ScreenEpoxy Coated according toDIN 30677-2 and GSK Approved


49

Price list 2014

AVK ref. DN PN Weight Type Delivery Grossnumber mm class kg code Price GBP

859-0050-10-1140003 50 10/16 14 FULL BORE (316 FITTINGS) A 2,177.00





859-0200-10-0140003 200 10 125 FULL BORE (316 FITTINGS) A 8,265.00






859-0065-00-1140003 65 10/16 17 REDUCED BORE (316 FITTINGS) A 2,175.00





859-0200-00-0140003 200 10 87 REDUCED BORE (316 FITTINGS) A 5,766.00




























Series 859 LOW PRESSURE REDUCING VALVEMaterial: Ductile IronFlange drilling to EN1092-2 (ISO 7005-2)PN10/PN16Internal Trim AISI 316Epoxy CoatedFilter AISI 316

LOW PRESSURE REDUCING VALVEAUTOMATICALLY REDUCES A HIGHERUPSTREAM PRESSURE TO A LOWERDOWNSTREAM PRESSURE.THE DOWNSTREAM PRESSURE IS KEPTCONSTANT, REGARDLESS OF CHANGES IN FLOWRATE OR UPSTREAM PRESSURE.THE MAIN CONTROL VALVE IS PILOT OPERATED,CAPABLE OF PRECISE SETTING AND EASYADJUSTMENT OF DOWNSTREAM PRESSURE.

OTHER APPLICATIONS ARE AVAILABLE

Additional Products available which complimentthis range are Y-Strainers and isolating valves.Further details available on request.


50

Price list 2014


859-0050-10-114000X 50 10/16 14 FULL BORE (316 FITTINGS) A 2,172.00





859-0200-10-014000X 200 10 125 FULL BORE (316 FITTINGS) A 8,258.00






859-0065-00-114000X 65 10/16 17 REDUCED BORE (316 FITTINGS) A 2,170.00





859-0200-00-014000X 200 10 87 REDUCED BORE (316 FITTINGS) A 5,761.00




























Series 859 PRESSURE REDUCING VALVEMaterial: Ductile IronFlange drilling to EN1092-2 (ISO 7005-2)PN10/PN16Internal Trim AISI 316Epoxy CoatedFilter AISI 316

PRESSURE REDUCING VALVE AUTOMATICALLYREDUCES A HIGHER UPSTREAM PRESSURE TO ALOWER DOWNSTREAM PRESSURE.THE DOWNSTREAM PRESSURE IS KEPTCONSTANT, REGARDLESS OF CHANGES IN FLOWRATE OR UPSTREAM PRESSURE.THE MAIN CONTROL VALVE IS PILOT OPERATED,CAPABLE OF PRECISE SETTING AND EASYADJUSTMENT OF DOWNSTREAM PRESSURE.


X = DENOTES SPRING RANGEVarious Options are availableInformation required to select Spring Range is;-*DOWNSTREAM PRESSURE



51

Gate valves

Price list 2014














































Series 859 PRESSURE SUSTAINING VALVEMaterial: Ductile IronFlange drilling to EN1092-2 (ISO 7005-2)PN10/PN16Internal Trim AISI 316Epoxy CoatedFilter AISI 316

PRESSURE SUSTAINING VALVE AUTOMATICALLYMAINTAINS UPSTREAM PRESSURE,REGARDLESS OF CHANGE IN FLOW RATE ORDOWNSTREAM PRESSURE.THE MAIN CONTROL VALVE IS PILOT OPERATED,CAPABLE OF PRECISE SETTING AND EASYADJUSTMENT OF WANTED UPSTREAMPRESSURE SUSTAINING, BACK PRESSURE ORHYDRAULIC UN-LOADING APPLICATIONS.


X = DENOTES SPRING RANGEVarious Options are availableInformation required to select Spring Range is;-*UPSTREAM PRESSURE



52

Price list 2014


853-350-201011000 350 16 1000 Pressure Sustaining/Relief C 60,500.00







OTHER OPTIONS AND DESIGNS AVAILABLE ARE PN25 RATING, MULTI FUNCTION, SPECIAL PORTING,

OTHER CONTROL VARIATIONS, KUWAIT SPECIFICATION

Series 853 PRESSURE SUSTAINING/RELIEFVALVEDuctile Iron Body/CoverFlange drilling to EN1092-2 PN16Gunmetal Trim CC491KEpoxy CoatedStandard Spring Suitbalefor OutletPressure up to 30mAlso Available are SpringRatingsAt 90m and 140m


853-350-301011000 350 16 1000 Constant Flow C 65,340.00

853-400-301011000 400 16 1015 Constant Flow C 69,300.00

853-450-301011000 450 16 1285 Constant Flow C 77,025.60

853-500-301011000 500 16 1300 Constant Flow C 86,724.00

853-600-301011000 600 16 2895 Constant Flow C 116,798.40

853-700-301011000 700 16 3650 Constant Flow C 136,620.00

853-800-301011000 800 16 3800 Constant Flow C 146,901.60



KUWAIT (MEW) SPECIFICATION REQUIRES;-

Pilot system to have strainer block and relay valve tapped and plugged to enable interchangeability (i.e.

Opposite side fitting if required)

Calibrated needle valve (i.e with indicator)

Calibrated indicator to have aluminium bronze stopper, indicator rod and stem seal holder

Cover to have small orifice air valve (851/00) having inflow check arrangement included.

Cover to be fitted with gunmetal air release cock

Isolating cocks to be in gunmetal

Valve to have upstream and downstream pressure gauges

Assembly bolts to be stainless steel BS EN 10088 Gr 1.4057

Flanges drilled Table 'E'

Series 853 CONSTNT FLOW VALVEDuctile Iron Body/CoverFlange drilling to EN1092-2 PN16Gunmetal Trim CC491KEpoxy CoatedStandard SpringSuitbale for OutletPressure up to 30mAlso Available areSpring RatingsAt 90m and 140m


853-350-101011000 350 16 1000 Pressure Reducing C 60,500.00









Series 853 PRESSURE REDUCING VALVEDuctile Iron Body/CoverFlange drilling to EN1092-2 PN16Gunmetal Trim CC491KEpoxy CoatedStandard Spring Suitbalefor OutletPressure up to 30mAlso Available are SpringRatingsAt 90m and 140m


53

Price list 2014

AVK ref. DN PN Weight Delivery Grossnumber mm class kg code Price GBP

856-0200-11101000 200/200 16 C 69,266.97

856-0300-11101000 300/250 16 1300 C 86,606.33

856-0300-01101000 300/300 16 1500 C 98,552.04

856-0400-11101000 400/300 16 2500 C 131,402.71

856-0400-01111000 400/400 16 2500 C 153,303.17

856-0450-11111000 450/400 16 300 C 172,714.93

856-0600-21101000 600/450 16 5000 C 185,158.37

856-0600-01111000 600/600 16 5000 C 229,954.75

856-0800-11111000 800/600 16 7000 C 249,864.25

856-0800-01111000 800/800 16 7500 C 299,638.01

856-1000-21111000 1000/800 16 12500 C 318,552.04

856-1000-01121000 1000/1000 16 12500 C 379,276.02

856-1200-21121000 1200/1000 16 TBC C 431,040.72

856-1400-11121000 1400/1200 16 20000 C 459,909.50

856-1600-21121000 1600/1200 16 21000 C 525,610.86

856-1800-21121000 1800/1400 16 TBC C Price on request

Suitable for use with a gearbox or actuator

PRICES ARE FOR BARESHAFT EXECUTION. PLEASE ENQUIRIE FOR MANUAL/ELECTRIC

OPERATION

Other sizes available contact our sales dept. for details

Series 856 SUBMERGED DISCHARGE VALVEDuctile Iron BodyFlange drilling to EN1092-2 PN16Gunmetal Ported Body CC491KEpoxy CoatedStainless Steel Gr 1.4541 SleeveStainless Steel Stem


857-0200-11110000 200 16 500 C 91,113.12

857-0300-11110000 300 16 800 C 96,542.99

857-0400-11010000 400 16 1200 C 99,339.37

857-0450-11010000 450 16 1200 C 111,755.66

857-0600-11010000 600 16 1500 C 145,900.45

857-0700-11010000 700 16 1900 C 170,687.78

857-0800-11010000 800 16 2700 C 189,647.06

857-0900-11010000 900 16 2700 C 223,574.66

857-1000-11010000 1000 16 3800 C 254,597.29

857-1200-11010000 1200 16 4500 C 299,312.22

857-1400-11010000 1400 16 6000 C 329,366.52

857-1500-11010000 1500 16 TBC C 339,321.27

857-1800-11010000 1800 16 9500 C 426,723.98

857-1900-11010000 1900 16 11000 C 435,248.87


PRICES ARE FOR BARESHAFT EXECUTION. PLEASE ENQUIRIE FOR MANUAL/ELECTRIC

OPERATION


Series 857 FREE DISCHARGE VALVE (FixedCone Valve)Ductile Iron BodyFlange drilling to EN1092-2 PN16Stainless Steel Gr 1.4401 SleeveEpoxy Coated


54

Price list 2014


Equilibrium Ball Float Valve - With Lever and Float

854-050-001001000 50 16 TBA C 2,040.24

854-080-001001000 80 16 TBA C 2,375.39

854-100-001001000 100 16 TBA C 2,717.52

854-150-001001000 150 16 TBA C 3,328.02

854-200-001001000 200 16 TBA C 5,622.98

854-250-001001000 250 16 TBA C 8,087.79

854-300-001001000 300 16 TBA C 10,128.10

Series 854/00 EQUILIBRIUM BALL FLOAT VALVEDuctile Iron BodyInlet Flange Drilled PN16Outlet Flange UndrilledPolypropylene (Spherical) FloatEpoxy Coated


855-0250-0100000 250 16 330 C 71,176.47

855-0300-0100000 300 16 531 C 85,411.76

855-0350-0100000 350 16 885 C 99,647.06

855-0400-0100000 400 16 900 C 103,447.96

855-0600-0100000 600 16 2722 C 155,185.52

855-0700-0100000 700 16 3494 C 181,176.47

855-0800-0100000 800 16 4539 C 205,574.66

855-0900-0100000 900 16 6352 C 248,868.78

855-1000-0100000 1000 16 6500 C 253,348.42


PRICES ARE FOR BARESHAFT EXECUTION. PLEASE ENQUIRIE FOR MANUAL/ELECTRIC OPERATION

For special flow/head conditions an Orifice Plate could be required along with the In-line throttling Valve. this is

not included in the proces above - please always consult our Sales Dept. with the site conditions to let us help

you choose the correct solution

General Information on Orifice Plates:-

In applications where there is a HIGH differential head, the energy may need to be shared between the valve

and a suitably designed orifice plate.

In applications where theoutlet head is LOW, then an Orifice Plate fitted downstream may be necessary in

order to avoid cavitation damage


Series 855 INLINE THROTTLING VALVEDuctile Iron Body/CoverFlange drilling to EN1092-2 PN16Stainless Steel Grade 316 Sleeve/LinerStainless Steel Gr 1.4401 StemEpoxy Coated


Equilibrium Ball Float Valve - With Lever and Float

854-350-001001000 350 16* 422 C 38,417.84

854-400-001001000 400 16* 439 C 40,237.47

854-450-001001000 450 16* 703 C 46,708.45

854-500-001001000 500 16* 720 C 54,598.51

Please Note Operating Pressure Limitations

Series 854/00 EQUILIBRIUM BALL FLOAT VALVEDuctile Iron BodyInlet Flange Drilled PN16Outlet Flange UndrilledPolypropylene (Spherical) FloatEpoxy Coated*NB Max Operating PressuresDN350+ = 2.5bar


55

Gate valves

Price list 2014


Pressure Operated Ball Float Valve - With Lever and Float

854-350-201001000 350 16 225 C 42,072.09

854-400-201001000 400 16 296 C 44,623.22

854-450-201001000 450 16 375 C 47,252.52

854-500-201001000 500 16 458 C 55,562.41

Series 854/20 PRESSURE OPERATED BALLFLOAT VALVEDuctile Iron BodyInlet Flange Drilled PN16Outlet Flange UndrilledPolypropylene (Spherical) FloatEpoxy Coated


29-188-521112001 80 16 15 14 C 787.24

Series 29/188Underground Fire HydrantResilient SealUniversal Flange PN10/PN16/D/EAutofrost ValveEpoxy CoatedCaptive stopperGunmetal Round ThreadStainless Steel Stem


56

Price list 2014

Gearbox / Actuator Selection

The Tables on pages 57 - 61 show the standard gearbox and actuator models to be usedwith our range of gate valves.

There are two different types of gearbox:

1 Bevel – input shaft of gearbox is perpendicular to valve stem

2 Spur – input shaft of gearbox is horizontal to valve stem

The gearboxes can be fitted with stem cap or handwheel. If electrical operation is required,a suitable ISO mounting flange option can be sourced on pages 58 - 61

Selecting the correct gearbox

1) Confirm size of valve2) Confirm type of gearbox (Gate: Spur or bevel, Butterfly: Worm)3) Confirm maximum differential / unbalanced pressure acting across the valve (i.e.

maximum difference between the upstream and downstream pressures).4) Refer to page 57 and select appropriate gearbox based on 6, 10 or 16 bar

pressure differential.5) Confirm any additional requirements (e.g. buried service application, handwheel,

stem cap etc)

ExampleA customer requires a spur gearbox for a DN1000 Series 54 Gate Valve. The unbalancedpressure is 4 bar.

SolutionRefer to DN1000 row and select the next highest unbalanced pressure (in this case 6 bar).Therefore, the gearbox model is IS7/AS3 18:1.


57

Gate valves

Price list 2014


58

Price list 2014


59

Gate valves

Price list 2014


60

Price list 2014

Please Note: For Butterfly valves only - the Electric Actuator is manufactured by Auma. The gea


61

Gate valves

Price list 2014

gearbox is from Rotork’s IW Range


62

Price list 2014

VALVE ACCRESSORIES AVAILABLEPRICE ON REQUEST

VALVE TYPE:- GATE VALVES

OPEN END TEST

DRAIN PLUG

INSPECTION COVER

JACKING SCREW

SPARES KIT

FLANGE SETS

VALVE TYPE:- BALL FLOAT VALVES

SPARES KIT incl. PISTON RING

VALVE FACE, ‘O’ RING, GASKET

VALVE TYPE:- NON RETURN VALVES

PROXIMITY SWITCH & BRACKET

BYPASS VALVE

HYDRAULIC DAMPER

SPARES KIT

FLANGE SETS

VALVE TYPE:- ALL

GUIDE BRACKETS

EXTENSION SPINDLES

COUPLINGS

FLOOR PILLARS

NAME PLATES

SPARES KIT

FLANGE SETS


63

Gate valves

Price list 2014

Expired Standard Revised Standard American Equivalent

BS 970 431 S29 BS EN 10088 Grade 1.4057 UNS S43100

BS 970 316 BS EN 10088 Grade 1.4401 UNS S31600



Stainless Steel 970 304 BS EN 10088 Grade 1.4301 UNS S30400

Al. Bronze BS 2874 CA104 BS EN 12163:1998 CW307G UNS C63000

BS1400 AB1 BSEN1982 CC331G UNS C95200

BS 2874 CZ132 BS EN 12164 CW602N UNS C35330

BS 1400 LG2C BS EN 1982:1999 CC491K UNS C83600

BS 1400 PB1C BS EN 1982:1999 CC481KUNS C90250

Ductile Iron BS 2789 Gr 500-7 BS EN 1563 GJS 500-7 ASTM A536 Gr 65-45-12


64

Price list 2014

1. GENERAL

a. The Company shall sell and the Buyer shall purchase the Goods inaccordance with any written quotation of the Company which isaccepted by the Buyer, or any written Order of the Buyer which isaccepted by the Company, subject in either case to these Conditionswhich shall govern the Contract to the exclusion of any other terms andconditions subject to which any such quotation is accepted, or purportedto be accepted, or any such order is made or purported to be made bythe Buyer.

b. “Buyer” means the individual, firm, company or other party from whoman order to supply Goods is received by the Company including any“subsidiary undertaking” or “holding company” of the Buyer and any“subsidiary undertaking” of any such “holding company” (as such termsare defined in the Companies Acts 2006).

c. “Conditions” means the standard terms and conditions of sale of theCompany as set out herein and includes any additional terms andconditions of sale agreed in writing by the Company.

d. “Contract” means a contract for the supply of Goods by the Companyto the Buyer whether made verbally or in writing and which shall besubject to these Conditions.

e. “Company” means Glenfield Valves Ltd, a company incorporated inScotland (Company Number SC220455) and having its registered officeat Glenfield Works, Queens Drive, Kilmarnock, Ayrshire, KA1 3XF,Scotland, United Kingdom.

f. “Goods” means the goods which the Company is to supply under theContract and includes any of them or any or any part of them.

g. “Order” means the Buyer’s written order for the Goods.

h. Any concession or waiver by the Company shall not prejudice theexercise by the Company of any of its rights hereunder.

i. The unenforceability or invalidity of any one Condition shall not affect theenforceability of the remainder.

2. DELIVERY

a. If the quoted price includes carriage, delivery will be deemed to takeplace the Buyer’s works or site specified in the Contract Carriage Paidto (“CPT”) (as defined in Incoterms 2010. Unless otherwise stated, theCompany will not be responsible for offloading.

b. If the quoted price does not include carriage, delivery will be deemed totake place ”Ex Works” (“EXW”) (as defined in Incoterms 2010).

c. Any stipulated time for delivery shall date from the receipt of theCompany of the Order or, whether applicable, of any information ordrawings supplied by the Buyer to enable the Company to put the workin hand, whichever shall be the latter. If there shall be any discrepancyor inconsistency between the drawings and the information supplied, thedrawings shall prevail.

d. The Company will do its best to comply with requirements of delivery,but does not accept liability for any loss or damage arising directly orindirectly out of delay in delivery or failure to deliver. Delay in deliveryshall not entitle the Buyer to terminate the Contract in whole or in part,unless circumstances are exceptional and the Buyer shall have servednotice to that effect on the Company and shall not have received theGoods within four weeks thereafter.

3. PACKING

All returnable containers, pallets and frames will be invoiced and must bepaid for by the Buyer at the time of payment of the Goods or otherwiseas agreed in writing between the Company and the Buyer. Whenreturned, carriage paid, in good condition to the Company’s site fullcredit for these charged and returnable containers, pallets and frameswill be made. This shall not apply to deliveries to overseas destinations.

4. CARRIAGE, DAMAGE IN TRANSIT AND STORAGE

a. If the quoted price includes carriage, the method of carriage shall beselected by the Company at its discretion.

b. Property in the Goods shall not pass until payment, all Goods shall beat the risk of the Buyer after delivery has taken place pursuant toConditions 2a or b (as appropriate).

c. Where the quoted price includes carriage, the Company cannot acceptliability for loss or damage in transit unless the notice of such loss ordamage is given to the Carriers and to the Company verbally within 24hours and in writing within 5 days of the due date for delivery.

d. The Company is prepared to arrange specific types of carriage at therequest and cost of the Buyer as Agent of the Buyer only and withoutliability of obligation on the part of the Company.

e. Storage

If through instructions from the Buyer, the Company is unable to despatchthe Goods within seven days after the date of notification that they areready for despatch, the Goods will be deemed to have been deliveredand the Company shall be entitled to arrange insurance and storagewithin its own premises or elsewhere on behalf of the Buyer and theBuyer will pay the Company for its reasonable charges incurred for suchinsurance or storage.

f. The Company is not responsible for export demurrage charges oradditional costs resulting from delay in unloading.

5. TITLE TO GOODS

a. Full legal and beneficial ownership of the Goods shall be retained by theCompany, notwithstanding that the risk in the same shall pass to theBuyer at the time of delivery pursuant to Conditions 2a or 2b (asappropriate), until the Company has received payment in full in respectof:-

(i) the Goods; and

(ii) all other sums which are or which become due and owing by the Buyerto the Company on any account whatsoever.

b. Until ownership of the Goods has passed to the Buyer, the Buyer shallhold the Goods in a fiduciary capacity and as bailee of the Company,and shall at all times take proper care of the same and will not obliterateor obscure any identifying mark on the Goods or their packaging andwill keep the Goods separate from any other goods and in such mannerthat they may be clearly identified as belonging to the Company, and theBuyer hereby grants to the Company the right to enter on the Buyer’spremises at any time during the continuation of the Contract to checkthat the Buyer is complying with the obligation contained in thisCondition.

c. Subject to Conditions 5d and 5e, the Buyer shall be at liberty to sell theGoods and hold the proceeds of such sale in trust to pay to the Companysuch sums to which it is entitled under the provisions of the Contract,provided that the sums due to the Company shall be kept separate fromany monies of the Buyer and/or any third party. Notwithstanding theprovisions of this Condition 5c, the Buyer may retain from the proceedsof such sale any sum in excess of the sum or sums to which theCompany is entitled under the Contract or any other Contract betweenthe Company and the Buyer.

d. The Company may at any time revoke the Buyer’s conditional power ofsale contained in Condition 5c by giving 24 hours’ prior notice in writingof such revocation and without notice in the event of the Buyer being indefault in the payment of any sum whatsoever due to the Company fromthe Buyer (whether in respect of the Goods which are the subject of theContract or in respect of any other Contract between the Company andthe Buyer) or if the Company has bona fide doubts as to the solvency ofthe Buyer.

e. The Buyer’s conditional power of sale pursuant to Condition 5c shallautomatically cease if:-

(i) a receiver or administrative receiver is appointed over the whole or anypart of the assets or the undertaking of the Buyer or a winding up orderis made against the Buyer or the Buyer goes into voluntary liquidation(except solely for the purposes of reconstruction or amalgamation) orcalls a meeting or makes any arrangement with its creditors or becomessubject to an administration order or becomes bankrupt; or

(ii) the Buyer pledges or in any way charges by way of security forindebtedness the whole or any part of the Goods; or

(iii) the Contract terminates.

f. On determination of the Buyer’s conditional power of sale underConditions 5d and/or 5e, the Buyer shall place the Goods in the Buyer’spossession at the Company’s disposal and the Company shall be

Glenfield Valves Limited - Conditions of Sale


65

Gate valves

Price list 2014

Glenfield Valves Limited - Conditions of Saleentitled to enter upon the premises of the Buyer for the purpose ofremoving the same using such force as is reasonably necessary for suchpurpose and (if necessary) dismantling or separating the Goods fromanything to which they are attached and all monies then due under theContract shall become immediately due and payable.

g. If at the time of the determination of the Buyer’s conditional power of saleunder Conditions 5d and/or 5e any Goods are in the custody or controlof any individual, firm or company other than the Buyer, the Buyer shallimmediately provide the Company with an authority in writing to collectthe same and the same shall be at the Company’s disposal.

h. Should the Contract require the installation of the Goods at or in thepremises of any third party, the Buyer shall notify the third party beforeinstallation begins of the terms of this Condition 5 and obtain theacknowledgement in writing of the third party (sending a copy thereof tothe Company) that the third party has noted the terms of this Condition5 and concedes the rights of the Company under it as if the Contractwas made by the third party directly with the Company.

i. The Company will have the right to maintain an action against the Buyerfor the price of the Goods notwithstanding that property in the Goodshas not passed.

j. The Buyer shall keep records of the persons to whom it sells, supplies,delivers or installs the Goods for quality monitoring and (if required)product recall purposes. The Buyer shall provide reasonable assistanceto provide such information to the Company for quality monitoring and(if required) product recall purposes if called upon to do so by theCompany.

6. PAYMENT

United Kingdom

a. Unless otherwise agreed in writing by the Company and the Buyer,payment for the Goods shall be made 30 days from date of theCompany’s invoice or notification of readiness to despatch whichever isthe sooner. Where the Buyer refuses delivery of Goods which are readyfor despatch the Company reserves the right to charge for the storageof such Goods at the rate of 2% of the price thereof per month.

b. All payments by cheque to be remitted in Pounds Sterling and fullynegotiable at any British Mainland Bank.

c. Export

For projects with a value of above £150,000 the Buyer shall pay a 20%advance payment to the Company at the time it places the purchaseOrder unless otherwise agreed in writing by the Company paymentterms shall be by LETTER OF CREDIT established in accordance withthe following conditions:-

1. all Letters of Credit to be irrevocable and confirmed by a bank in theUnited Kingdom;

2. all Letters of Credit to show Beneficiary as:

GLENFIELD VALVES LTD, GLENFIELD WORKS, QUEENS DRIVE,KILMARNOCK, AYRSHIRE, SCOTLAND, KA1 3XF;

3. credit is to be established for the amount of the Order;

4. credit should permit the Beneficiary to draw additional amounts towardsfreight and consular fees at actual supported by documentary evidence;

5. credit should allow for partial shipments and transhipment;

6. credit should allow for Bills of Lading clause “Loose Unprotected”;

7. credit should allow shipment from any UK Port;

8. credit should be valid for 28 days after acknowledged delivery time toallow for shipment and for a further 21 days to allow for presentation ofdocuments;

9. when certification of origin is required then this must allow for the termsEU, (UK) or EUROPEAN UNION – United Kingdom origin to be declared;

10.credit should cover the supply of “VALVES AS DETAILED ON OPENER’SORDER NO. .............”;

11.when an insurance certificate is required to be issued then the creditshould allow for cover as provided in the INSTITUTE CARGO CLAUSES(A) and/or INSTITUTE CARGO CLAUSES (AIR) (excluding sending by

post) as applicable, but subject to the exclusions contained therein.INSTITUTE WAR CLAUSES (CARGO) and/or INSTITUTE WAR CLAUSES(AIR) (excluding sendings by post) as applicable, INSTITUTE STRIKECLAUSES (CARGO) and/or INSTITUTE STRIKE CLAUSES (AIR CARGO)as applicable. Institute Classification Clause, Institute ReplacementClause so far as applicable; and Clauses (Air Cargo) as applicable; and

12.ALL BANK CHARGES shall be for opener’s account.

d. Overdue payments will attract a surcharge of 2% over The Royal Bankof Scotland plc’s base lending rate from time to time.

e. Payment terms shall remain in force at the Company’s discretion andshall be reviewed should Buyer fail to maintain such terms and/orGlenfield be advised of any change in the financial circumstances on thepart of the Buyer and/or the Company is unable to obtain CreditInsurance and/or the Company is deems the order value to beinsufficient to apply such terms.

7. WARRANTY, CLAIMS AND LIMITATION OF LIABILITY

a. For the warranty period identified in Condition 7k, all goodsmanufactured by the Company are of satisfactory quality and are solelyintended to be used for the normal purpose for which the Goods havebeen designed and where applicable conform to the relevant specifiedBritish/European Standards.

b. The Company shall be under no liability in respect of any defect in theGoods arising from any drawing, design or specification supplied by theBuyer or for any damage or loss arising from any use of the Goods whichis not in accordance with the Company’s instructions or the normalpurposes for which the Goods have been designed.

c. The Company shall be under no liability in respect of any defects arisingfrom fair wear and tear, wilful damage, negligence, abnormal working orenvironmental conditions, and failure to follow the Company’sinstruction, misuse or alteration or repair of the Goods without theCompany’s approval.

d. Save as aforesaid, all other conditions, guarantees or warranties, whetherexpress or implied by Statute, Common Law or otherwise including (butwithout prejudice to the generality of the foregoing) conditions, whetherknown or made known to the Company or not (save as exclusions isexpressly prohibited by statute) hereby excluded.

e. The Company shall be under no liability under the above warranty (orany other warranty, condition or guarantee) if the total price of the Goodshas not been paid by the due date.

f. Goods shall be inspected promptly by the Buyer upon delivery. Qualityclaims must be made in writing immediately after the Buyer learns of anydefect and in any event within 14 days. Any claim not made in writingand received by the Company within the aforesaid time limit shall bedeemed waived.

g. In the case of failure in service of the Goods during the warranty periodidentified in Condition 7k, unless notification shall be made in writing tothe Company within 14 days and the failed Goods made available toinspection by the Company or any person on its behalf, any claim inrespect thereto shall be deemed waived.

h. In the event of any Goods supplied by the Company and not beingproved to be defective or failing in service, the Buyer shall be entitledonly to such restitution as the Company may receive from themanufacturer and/or supplier to the Company.

i. The Company shall have the right to inspect and conduct its own testsupon any Goods that are the subject of a damage or loss or quality claimor have failed in service.

j. The right of the Buyer to set off the value of any shortage, defectiveGoods or Goods not otherwise conforming to Contract shall be restrictedto the specific invoice for the Goods in question and shall not apply toprevious or to future accounts.

k. The period of warranty for the Goods shall be 12 months from date ofdespatch unless otherwise agreed in writing in the Contract.

l. The Buyer shall have no other rights in connection with defects than aclaim for rectification of the defects as soon as possible in the form ofrepair, replacement delivery or subsequent delivery at the Company’soption. In particular the Company shall not be responsible for anylosses, damages, costs or expenses relating to unavailability of the


66

Price list 2014

Goods following a return or the removal, reinstallation, transportation orfreight charges for returning, following discovery of a defect, the defectiveGoods to the Company.

m. THE COMPANY SHALL NOT IN ANY CASE BE LIABLE TO THECUSTOMER OR TO ANY OTHER PARTY FOR ANY SPECIAL,INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR LOSS ORDAMAGE (INCLUDING ALL MANNER OF COSTS, FEES ANDEXPENSES) ARISING FROM BREACH OF WARRANTY, BREACH OFCONTRACT, NEGLIGENCE, DAMAGE TO PROPERTY, UNAVAILABILITYOF THE GOODS FOLLOWING A RETURN OR ANY OTHER CAUSEHOWSOEVER EXCEPT AS EXPRESSLY PROVIDED IN THESECONDITIONS AND IN SO FAR AS PERMITTED BY LAW.

n. IN ANY EVENT, AND SUBJECT TO CONDITION 7o, THE MAXIMUMAGGREGATE LIABILITY OF THE SELLER TO THE CUSTOMER: (i) INRESPECT OF BREACH OF CONTRACT SHALL BE A SUM EQUIVALENTTO THE PRICE OF THE GOODS; AND (ii) IN RESPECT OFMISREPRESENTATION, NEGLIGENCE, PRODUCT LIABILITY, DELICT,DAMAGE TO PROPERTY, OR OTHERWISE SHALL BE LIMITED TO THESUM OF TWO HUNDRED THOUSAND POUNDS (£200,000) STERLINGIN RESPECT OF ANY CLAIM OR SERIES OF CLAIMS ARISING FROM ACOMMON CAUSE IN ANY PERIOD OF TWELVE (12) MONTHS.

o. Nothing in these Conditions shall be deemed to restrict or exclude theCompany’s liability for death or personal injury caused by the Company’snegligence or for fraud or fraudulent misrepresentation or any othermatter in respect of which it will be unlawful for the Company to excludeor retract liability.

p. The Company does not give any waiver of its insurers’ rights tosubrogation or any other right of recourse.

q. The Company’s insurance policies for product liability claims is availablefor inspection upon request.

8. INDEMNITY

a. The Buyer shall indemnify the Company in respect of all damage or injuryoccurring to any person, firm, Company or property and against allactions, suits, claims, demands, charges or expenses in connectiontherewith for which the Company may become liable in respect of theGoods sold under the Contract in the event that the damage or injuryshall have been occasioned otherwise than by the negligence of theCompany.

b. The Buyer shall indemnify the Company against all damages, penalties,costs and expenses to which the Company may become liable throughany work done in accordance with specifications, drawing or specialrequirement of the Buyer which may involve an infringement of anyPatent, Registered Design or other intellectual property of a third partyor may cause any actionable damage or loss to any third party.

9. PERFORMANCE OF CONTRACT

Each delivery shall be considered a separate transaction and default inrelation to any one delivery shall not vitiate the Contract as regards otherdeliveries.

10.INSURANCE

The Company accepts Orders subject to the absolute right to cancel therescind Contracts in cases where the Buyer, or the terms stated, are notacceptable to the Company’s insurers or where applicable to ExportCredit Guarantee department or to any other Governmental or otherbody guaranteeing Overseas Contracts.

11.TECHNICAL ADVICE AND INFORMATION

a. Any descriptive information or samples supplied by the Company, or onits behalf, are for general guidance only and do not form part of anyContract between the Company and the Buyer and the Buyer admits thatit was not induced to enter into the Contract by any representationcontained in such information or sample.

b. The Company may at the request of the Buyer without being under anyobligation to do so, furnish technical advice concerning the use of theGoods and such assistance will be given to the best of the Company’sability but this shall be on the express understanding that any suchadvice or assistance is given and accepted at the Buyer’s risk and theCompany shall not be liable for any loss, damage or claims arisingtherefrom.

c. No liability will be accepted for work carried out or material supplied tothe Buyer’s own drawings, design or specification.

d. The submission of a quotation or acceptance of any order by theCompany in no way implies any responsibility on its part for any by law,planning or other approval which may be required by the Buyer.

12.FORCE MAJEURE

Deliveries may be partially or totally suspended by either party duringany period in which it is prevented from manufacturing, delivering ortaking delivery of the Goods through any circumstances outside itscontrol and such party notifies the existence of such circumstances tothe other party in writing if because of such circumstances the Companyis unable to supply the total requirements of the Goods, the Companymay allocate its available supply among all of its customers, includingthose not under contract, as the Company thinks fit. Deliveries sosuspended for three months may thereafter during such suspension becancelled without liability but the Contract between the parties shallotherwise remain unaffected. Circumstances outside its control shallinclude (without prejudice to the generality of the foregoing) fire, fog, war,riots, strikes, lock outs, trade disputes, transport delays, accidents of anykind, perils of the sea or rivers, and difficulty in obtaining materials exceptat unreasonably enhanced prices due to any of the foregoing reasons.

13.INTELLECTUAL PROPERTY

No representation, warranty or indemnity is given by the Company thatthe Goods do not infringe any Patents, copyright, Trade Marks,Registered or Unregistered Designs or other intellectual property rights.

14.ASSIGNABILITY

The Contract of which these Conditions form part is personal to theCompany and the Buyer, and the Buyer shall not assign the benefits orthe burden thereof without the Company’s written consent.

15.TERMINATION

The Company reserves the right (without prejudice to its other rights andremedies) either to terminate the Contract between the parties or tosuspend further deliveries under it or require payment in advance in theevent that:-

(i) the Buyer breaches any terms or conditions of the Contract and fails toremedy the same within seven (7) days of the date of a written noticefrom the Company calling upon it to do so;

(ii) the Buyer fails to pay for any one delivery when the same becomes due;or

(iii) if the Buyer goes into liquidation or has a receiver or administrativereceiver appointed over any part of its business or assets or is bankruptor suffers any other insolvency event or enters into any arrangement orcomposition with creditors other than (where the Buyer is a company)where these events take place for the sole purpose of a scheme for asolvent amalgamation of the Buyer with one or more other companiesor the solvent reconstruction of the Buyer.

16.CANCELLATIONS

In the event of the Buyer cancelling an Order for whatever reason, theCompany reserves the right to charge the Buyer either the full price ofthe Goods ordered or a proportion thereof depending upon the progressof the order at the time of cancellation, which proportion shall not in anyevent be less than 20% of such price.

17.RIGHTS OF THIRD PARTIES

The Contract is made for the benefit of the parties to it and (whereapplicable) their successors and permitted assignees and is not intendedto benefit, or be enforceable by, anyone else.

18.LAW APPLICABLE

These Conditions and the Contract and any dispute between the partiesincluding a dispute as to the existence of the Contract shall beinterpreted in accordance with and be subject in all respects to the lawsof England and Wales and shall be subject to the non-exclusivejurisdiction of the English Courts.

Glenfield Valves Limited - Conditions of Sale


67

Gate valves

Price list 2014

General Telephone Number: +44 (0) 1563 521150

General Fax Number: +44 (0) 1563 545616

Website: http://www.glenfield.co.uk

Email: [email protected]

Mail: Glenfield Valves Ltd.

Glenfield Works,

Queens Drive,

Kilmarnock,

Ayrshire,

KA1 3XF

Scotland,

United Kingdom.

Terms & Conditions of Sale: Page 64 - 66

Bank Details

Nordea Bank Finland Plc 8th Floor, City Place House, 55 Basinghall Street, London EC2V 5NB

Sort code 40-48-78

Account code 43082201

IBAN GB77NDEA40487843082201

Swift NDEAGB2L

Contact Details for:

Water works, transmission lines, hydro, dams and reservoir projects

Direct Dial 0044 (0) 1563 521150 Email [email protected]

Company Key Contacts


Glenfield Valves Limited

Continental Europe, Russia, South Eastern Europe:AVK International A/S - Denmark - www.avkvalves.com

AVK Sales Companies Europe:AVK Norge - Norway - www.avk.noAVK Mittelmann - Germany - www.avkmittelmann.comAVK Nederland - Netherlands - wwwavknederland.nlAVK Belgium - Belgium - [email protected] Armadan - Poland - www.avk.com.plAVK France - France - [email protected] Valvulas - Spain - [email protected]

UK and Ireland:AVK UK - England - www.avkuk.co.uk

North America:American AVK Co.Email: [email protected]: www.americanavk.com

Glenfield America.Email: [email protected]

Latin America and Caribbean:AVK OverseasEmail: [email protected]: www.avkvalves.com

Brazil:AVK Valvulas do Brasil Ltda.Email: [email protected]

Southern Africa:AVK Valves Southern Africa (Pty) Ltd.Email: [email protected]: www.avkvalves.co.za

Australasia:Valves for Water, Sewage, Fire and GasAVK Australia Pty LtdEmail: [email protected]: www.avkvalves.com.au

Valves for Mining & Industrial ApplicationsAVK Australia Pty LtdEmail: [email protected]: www.avkvalves.com.au

The Middle East:AVK Gulf JLTWeb: www.avk.aeSaudi Valves Manufacturing Co. Ltd.Saudi Arabia - www.avk.com.sa

Asia:AVK Malaysia Sdn. BhdWeb: www.avkvalves.com.myAVK VietnamEmail: [email protected]: www.avkvalves.com

Hong KongAVK Valves HK co LtdEmail: [email protected]

ChinaAVK Valves (Shanghai) co LtdEmail [email protected]: www.avkchina.com


Documents

Price List