Price Book: Meridian Vertical Files

Z Meridian® Vertical Files Price Book (1/19) 1

Introduction page2

Meridian®VerticalFiles 3

Vertical Files 5

Accessories 15

Keyless Locks 21

Indices 25

By Name 25

By Number 27

Appendices

20-Day or Less/Assigned Lead-Time Order Information

Keyed-Alike Information

Stain-to-Match Program

Forthelatestmaterialsinformation,refertotheMaterialspagesonHermanMiller.com.

Y PriceBook

Prices effective January 7, 2019 Meridian® Vertical Files

2 Meridian® Vertical Files Price Book (1/19) HermanMiller

Introduction

GeneralInformation

This book is effective January 7, 2019, subject to change without

notice. Products may be purchased from authorized Herman Miller deal-

ers who will quote prices upon request. For more information

about our products and services or to see a list of dealers, visit www.

HermanMiller.com.

All prices are list prices. Additional services, such as planning

services, design, storage, and installation, are not included and must

be added to these prices when the additional services are requested.

Illustrations, specifications, and prices are based on the latest

information at the time of publication. The right is reserved to make

changes at any time without notice in prices, fabrics, finishes, mate-

rials, specifications, and models, and also to discontinue models and

finishes.

Dimensions shown in the drawings are engineering drawing dimen-

sions rounded up to the nearest 1/8”. Product is shipped set

up or knocked down. Products that include “Shipped knocked down”

in the description require some assembly. If this statement does not

appear in the description, the product is shipped assembled.

Service problems are normally handled by a Herman Miller

authorized dealer. Where this cannot be accomplished on a local

level, service problems should be referred to the Customer Care

Representative for your region, Herman Miller, Inc., Zeeland, Michigan

49464.

20-DayorLess/AssignedLead-TimeShipments

All products and options in this price book not designated by an

Assigned Program icon A will ship in 20businessdaysorlessafter

being acknowledged by Herman Miller.

Products and options designated by an A are on the assigned lead-

time program and may ship in 20 days, less than 20 days, or more than

20 days from order acknowledgement.

ANoteontheOrganizationofThisBook

There are a few signals that will help you understand the organization

of this book. Once you know them, you should be able to find your way

around easily.

Likeanewspaper,thisbookisformattedwithcolumnsoftext

andillustrationsthatrunvertically.

Information wraps from one column to the next and continues for as

many pages as it needs to.

Blackbarsareclues.

A black bar at the top of a page signals the start of information about a

product.

This information is divided into two sections, each signaled by a

black bar. Product Information includes a description, additional notes,

and dimensional drawings. Specification Information, which always

begins at the top of a column, includes a series of steps. Each step rep-

resents a decision you need to make in order to complete your product

number. Steps must be followed sequentially. The number of pages

needed to complete information on a product varies; some will be

complete in one page; others may fill three or four pages. Just continue

going through the steps until you run into the next product, signaled by

the black bar at the top of the page.

Black tabs running along the outside edge of the page help you

locate what section you are in or what section you want to go to. You

can thumb forwards or backwards to find a section; tabs and text

appear on both sides of the page.

The additional pages in the back of the book include the appendices

and indices. They are signaled by a long black bar running along the

outside edge of the page.

Theindexispresentedtwoways.

The first index is in alphabetical order by product name. It can be help-

ful if you are new to the products and numbering scheme or if you are

looking for a type of product, such as work chair or round table.

The second index is by product number. It lists, in alphanumeric order,

the base product number, typically a five-digit number.

HermanMiller Meridian®VerticalFilesPriceBook(1/19) 3

Meridian®VerticalFiles

Vertical Files

Accessories

Keyless Locks

4 Meridian®VerticalFilesPriceBook(1/19) HermanMiller

==

= M

eridian® Vertical Files


Standard-PullVerticalFile

Product Information

Description

This15"-or18"-widestackingverticalfilehasstandardpullsandsmooth

ortexturedsteel.Thefilehasnotoporametalorlaminatetop.Each

modulecanbespecifiedas1filedraweror2boxdrawers.Filedrawers

includeafilecompressor;boxdrawersincludeanadjustabledrawer

divider.Apositiveinterlocksystempermitsonly1drawertoopenata

time.1lockcontrolsalldrawers.5baseheightsareavailable;allbases

includeadjustableglides.

Actualverticalfiledepthsare177/8",217/8",or277/8".

Notes

1counterweightisincludedfor18"-deepverticalfiles.Foradditional

stabilityon22"-and28"-deepfiles,specifycounterweight(CB).

Dimensionalillustrationsdonotincludeallpossibleconfigurations.

18"-deepfiledrawershave14"offilingcapacity.22"-deepfiledrawers

have18"offilingcapacity.28"-deepfiledrawershave24"offiling

capacity.

Orderoptionalaccessoriesfor15"-widefileseparately:

•Drawerdivider(73-1567-D)

•Filedrawerorganizer(73-9874-FDO)

•Filedrawerorganizer(LG901)

•Penciltray(73-1516-PT)

•Stationerytray(73-7082-SST)





•Stationerytray(73-7082-SST-SP)

Nolockoption(NL)canonlybespecifiedonfileswithnotopoption(NT)

orlaminatetopoption(TL).

Forkeyed-alikelocks,orderlockplugsseparately.SeeKeyed-Alike

InformationinAppendices.

Dimensions

36-15! 36-18!

Mer

idia

n® V

erti

cal F

iles

==

=


Standard-PullVerticalFilecontinued

Specification Information

Step1.

36- A

Step2.Width

15 15"wideA

18 18"wideA

Step3.Depth

18- 18"deepA

22- 22"deepA

28- 28"deepA

Step4.NumberofModules

2 2modulesA

3 3modulesA

4 4modulesA

5 5modulesA

6 6modulesA

Step5.Paint/SteelType

SS smoothpaintonsmoothsteelA +$0

TS smoothpaintontexturedsteelA +$20

XS texturedpaintonsmoothsteelA +$0

Step6.SurfaceFinish

NonmetallicPaint

For smooth paint on smooth steel (SS) or smooth paint on textured

steel (TS)

8Q folkstonegreyA +$0

91 whiteA +$0

98 studiowhiteA +$0

9J sparrowA +$0

BU blackumberA +$0

CL coolgreyneutralA +$0

G2 graphitesatin +$0

HF innertonelight +$0

HT innertoneA +$0

LT lighttoneA +$0

LU softwhiteA +$0

MT mediumtone +$0

SG slategreyA +$0

WA wheatA +$0

WL sandstoneA +$0

MetallicPaint


steel (TS)

1209 platinumA +$0

1210 hematiteA +$0

1212 bronziteA +$0

CN metallicchampagneA +$0

EH metallicbronzeA +$0

MS metallicsilverA +$0

SandTexturePaint

For textured paint on smooth steel (XS)

98 studiowhiteA +$0

BrightSandTexturePaint


91 whiteA +$0


G1 graphiteA +$0

WN warmgreyneutralA +$0

Step7.Top

18- 22- 28-

NT notopA +$0 0 0

T1 +$55 62 751"-highpaintedmetaltopwith

squarededgeA

T2 +$55 62 7511/4"-highpaintedmetaltopwith

squarededgeA


radiusedgeA

TL +$141 150 15811/4"-highlaminatetopwith

thermoplasticedgeA

TR 11/4"-highrecutveneertopA +$233 239 251

TF 11/4"-highwoodveneertopA +$238 246 257

==

= M




Step8.

TopFinish:Solid-ColorLaminate

For 11/4"‑high laminate top with thermoplastic edge (TL)


91 whiteA +$0

98 studiowhite +$0


HF innertonelightA +$0

HT innertoneA +$0

LT lighttoneA +$0

LU softwhiteA +$0

WL sandstoneA +$0


TopFinish:LinenLaminate


LBM crisplinen +$0

LBN classiclinen +$0

LBP casuallinen +$0

TopFinish:MeshLaminate


LBK pewtermesh +$0

LBL steelmesh +$0

TopFinish:TwillLaminate


LBF neutraltwill +$0

LBG sarumtwill +$0

LBH earthentwill +$0

LBJ graphitetwill +$0

LBQ whitetwill +$0

TopFinish:Wood-GrainLaminate


HM naturalmapleA +$0

HP lightanigreA +$0

LA lightashA +$0

LBA clearonash +$0

LBB oakonash +$0

LBC walnutonash +$0

LBD darkbrownwalnut +$0

LBR phantomecru +$0

LBS phantomcocoa +$0

LBU mediummattewalnut +$0

LBV warmgreyteak +$0

LBE mediumredwalnut +$0

LM mahoganyA +$0

76 lightbrownwalnutA +$0

HX agedcherryA +$0

HY walnutoncherryA +$0

TopFinish:ZephyrLaminate


28 canyonA +$0

29 mistedA +$0

VeneerTopFinish:WoodVeneer

For 11/4"‑high wood veneer top (TF)

2U lightbrownwalnutA +$20

40 darkbrownwalnutA +$20

ED agedcherryA +$20

EK mediumredwalnutA +$20

EW mediummattewalnutA +$20

ET clearonashA +$20

EU oakonashA +$20

EV walnutonashA +$20

UL naturalmapleA +$20

UX walnutoncherryA +$20

VeneerTopFinish:RecutVeneer

For 11/4"‑high recut veneer top (TR)

RA lightashA +$0

RK mahoganydarkA +$0

RM mahoganyA +$0

Step9.EdgeFinish


98 studiowhite +$0

28 canyonA +$0

Mer

idia

n® V

erti

cal F

iles

==

=



29 mistedA +$0



91 whiteA +$0

BU blackumberA +$0


G2 graphitesatinA +$0



HP lightanigreA +$0

HT innertoneA +$0

HX agedcherryA +$0


LA lightashA +$0

LBA clearonash +$0

LBB oakonash +$0

LBC walnutonash +$0


LBR phantomecru +$0





LBK pewtermesh +$0

LBL steelmesh +$0

LBM crisplinen +$0


LBP casuallinen +$0


LBG sarumtwill +$0



LBQ whitetwill +$0

LM mahoganyA +$0

LU softwhiteA +$0

MT mediumtoneA +$0

SG slategreyA +$0

WA wheatA +$0

WL sandstoneA +$0


Step10.Lock/FillerTop


18- 22- 28-

NL nolockA +$0 0 0

10 1"lockingfillertopA +$59 66 80

Step11.Lock

For no top (NT)

NL nolockA +$0

For 1"‑high painted metal top with squared edge (T1), 11/4"‑high painted

metal top with squared edge (T2), 11/4"‑high painted metal top with

radius edge (T3), 11/4"‑high recut veneer top (TR), or 11/4"‑high wood

veneer top (TF)

KA keyedalikeA +$46

KC keyeddifferently,chromeA +$46

KD keyeddifferently,blackA +$46

For 1" locking filler top (10)

KA keyedalikeA +$46



Step12.Configuration(TopModule)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482

Step13.Configuration(2ndModulefromTop)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482

Step14.Configuration(3rdModulefromTop)

For 3 modules (3), 4 modules (4), 5 modules (5) AND 6 modules (6)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482

==

= M




Step15.Configuration(4thModulefromTop)

For 4 modules (4), 5 modules (5) AND 6 modules (6)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482


For 5 modules (5) AND 6 modules (6)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482


For 6 modules (6)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482

Step18.BaseHeight

18- 22- 28-

B1 1"-highbaseA +$81 93 100

B2 11/2"-highbaseA +$81 93 100

B3 21/4"-highbaseA +$81 93 100

B4 31/4"-highbaseA +$81 93 100

B5 41/4"-highbaseA +$118 132 151

BA 1"-highrecessedbaseA +$118 132 151

BB 11/2"-highrecessedbaseA +$118 132 151

BC 21/4"-highrecessedbaseA +$118 132 151

BD 31/4"-highrecessedbaseA +$118 132 151

Step19.Counterweight

For 18" deep (18‑)

CB counterweightA +$126

For 22" deep (22‑) or 28" deep (28‑)

NO nocounterweightA +$0


Mer

idia

n® V

erti

cal F

iles

==

=


Bevel-PullVerticalFile

Product Information

Description

This15"-or18"-widestackingverticalfilehasbevelpullsandsmooth

ortexturedsteel.Thefilehasnotoporametalorlaminatetop.Each

modulecanbespecifiedas1filedraweror2boxdrawers.Filedrawers

includeafilecompressor;boxdrawersincludeanadjustabledrawer

divider.Apositiveinterlocksystempermitsonly1drawertoopenata

time.1lockcontrolsalldrawers.5baseheightsareavailable;allbases

includeadjustableglides.

Actualverticalfiledepthsare177/8",217/8",or277/8".

Notes

1counterweightisincludedfor18"-deepverticalfiles.Foradditional

stabilityon22"-and28"-deepfiles,specifycounterweight(CB).

Dimensionalillustrationsdonotincludeallpossibleconfigurations.

18"-deepfiledrawershave14"offilingcapacity.22"-deepfiledrawers

have18"offilingcapacity.28"-deepfiledrawershave24"offiling

capacity.



•Filedrawerorganizer(73-9874-FDO)



•Stationerytray(73-7082-SST)





•Stationerytray(73-7082-SST-SP)

Nolockoption(NL)canonlybespecifiedonfileswithnotopoption(NT)

orlaminatetopoption(TL).

Forkeyed-alikelocks,orderlockplugsseparately.SeeKeyed-Alike

InformationinAppendices.

Dimensions

34-15! 34-18!

==

= M



Bevel-PullVerticalFilecontinued


Step1.

34- A

Step2.Width

15 15"wideA

18 18"wideA

Step3.Depth

18- 18"deepA

22- 22"deepA

28- 28"deepA

Step4.NumberofModules

2 2modulesA

3 3modulesA

4 4modulesA

5 5modulesA

6 6modulesA

Step5.Paint/SteelType

SS smoothpaintonsmoothsteelA +$0

TS smoothpaintontexturedsteelA +$20

XS texturedpaintonsmoothsteelA +$0

Step6.SurfaceFinish

NonmetallicPaint


steel (TS)


91 whiteA +$0

98 studiowhiteA +$0

9J sparrowA +$0

BU blackumberA +$0



HT innertoneA +$0

LM mahoganyA +$0

LT lighttoneA +$0

LU softwhiteA +$0

MT mediumtoneA +$0

SG slategreyA +$0

WA wheatA +$0

WL sandstoneA +$0

MetallicPaint


steel (TS)

1209 platinumA +$0

1210 hematiteA +$0

1212 bronziteA +$0

CN metallicchampagneA +$0

EH metallicbronzeA +$0

MS metallicsilverA +$0

SandTexturePaint


98 studiowhiteA +$0

BrightSandTexturePaint


91 whiteA +$0


G1 graphiteA +$0


Step7.Top

18- 22- 28-

NT notopA +$0 0 0

T1 +$55 62 751"-highpaintedmetaltopwith

squarededgeA


squarededgeA


radiusedgeA

TL +$141 150 15811/4"-highlaminatetopwith

thermoplasticedgeA

TR 11/4"-highrecutveneertopA +$233 239 251

TF 11/4"-highwoodveneertopA +$238 246 257

Mer

idia

n® V

erti

cal F

iles

==

=



Step8.

TopFinish:Solid-ColorLaminate



91 whiteA +$0

98 studiowhite +$0

BU blackumberA +$0



HT innertoneA +$0

LT lighttoneA +$0

LU softwhiteA +$0

WL sandstoneA +$0


TopFinish:LinenLaminate


LBM crisplinen +$0


LBP casuallinen +$0

TopFinish:MeshLaminate


LBK pewtermesh +$0

LBL steelmesh +$0

TopFinish:TwillLaminate



LBG sarumtwill +$0



LBQ whitetwill +$0

TopFinish:Wood-GrainLaminate



HP lightanigreA +$0

LA lightashA +$0

LBA clearonash +$0

LBB oakonash +$0

LBC walnutonash +$0


LBR phantomecru +$0





LM mahoganyA +$0


HX agedcherryA +$0


TopFinish:ZephyrLaminate


28 canyonA +$0

29 mistedA +$0

VeneerTopFinish:WoodVeneer

For 11/4"‑high wood veneer top (TF)

2U lightbrownwalnutA +$20

40 darkbrownwalnutA +$20

ED agedcherryA +$20

EK mediumredwalnutA +$20

EW mediummattewalnutA +$20

ET clearonashA +$20

EU oakonashA +$20

EV walnutonashA +$20

UL naturalmapleA +$20

UX walnutoncherryA +$20

VeneerTopFinish:RecutVeneer

For 11/4"‑high recut veneer top (TR)

RA lightashA +$0

RK mahoganydarkA +$0

RM mahoganyA +$0

Step9.EdgeFinish


98 studiowhite +$0

28 canyonA +$0

==

= M




29 mistedA +$0



91 whiteA +$0

BU blackumberA +$0





HP lightanigreA +$0

HT innertoneA +$0

HX agedcherryA +$0


LA lightashA +$0

LBA clearonash +$0

LBB oakonash +$0

LBC walnutonash +$0


LBR phantomecru +$0





LBK pewtermesh +$0

LBL steelmesh +$0

LBM crisplinen +$0


LBP casuallinen +$0


LBG sarumtwill +$0



LBQ whitetwill +$0

LM mahoganyA +$0

LU softwhiteA +$0

MT mediumtoneA +$0

SG slategreyA +$0

WA wheatA +$0

WL sandstoneA +$0


Step10.Lock/FillerTop


18- 22- 28-

NL nolockA +$0 0 0

10 1"lockingfillertopA +$59 66 80

Step11.Lock

For no top (NT)

NL nolockA +$0

For 1"‑high painted metal top with squared edge (T1), 11/4"‑high painted

metal top with squared edge (T2), 11/4"‑high painted metal top with

radius edge (T3), 11/4"‑high recut veneer top (TR), or 11/4"‑high wood

veneer top (TF)

KA keyedalikeA +$46



For 1" locking filler top (10)

KA keyedalikeA +$46



Step12.Configuration(TopModule)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482

Step13.Configuration(2ndModulefromTop)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482

Step14.Configuration(3rdModulefromTop)

For 3 modules (3), 4 modules (4), 5 modules (5) AND 6 modules (6)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482

Mer

idia

n® V

erti

cal F

iles

==

=




For 4 modules (4), 5 modules (5) AND 6 modules (6)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482


For 5 modules (5) AND 6 modules (6)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482


For 6 modules (6)

1518- 1522- 1528- 1818- 1822-

V fileA +$308 316 329 317 325

Q box/boxA +$446 452 467 452 462

1828-

V fileA +$340

Q box/boxA +$482

Step18.BaseHeight

18- 22- 28-

B1 1"-highbaseA +$81 93 100

B2 11/2"-highbaseA +$81 93 100

B3 21/4"-highbaseA +$81 93 100

B4 31/4"-highbaseA +$81 93 100

B5 41/4"-highbaseA +$118 132 151

BA 1"-highrecessedbaseA +$118 132 151

BB 11/2"-highrecessedbaseA +$118 132 142

BC 21/4"-highrecessedbaseA +$118 132 151

BD 31/4"-highrecessedbaseA +$118 132 151

Step19.Counterweight

For 18" deep (18‑)


For 22" deep (22‑) or 28" deep (28‑)

NO nocounterweightA +$0


==

==

==

Meridian® V

ertical File Accessories


PencilTrayforBoxDrawer,Meridian®Pedestal

Product Information

Description

Thisplasticdrawerstorespencilsandothersmallitemsinaboxdrawer.

The12"-widepenciltrayfitsina15"-wideboxdrawer;the15"-widepencil

trayfitsinan18"-wideboxdrawer.Finishisblackumber.

Notes

PenciltraycannotbeusedinTu®pedestalsorQuadrant®pedestals.

For5000Seriesfurniture,penciltraycanbeusedinstandard-,bevel-,or

contour-pullpedestals.

Dimensions


Step1.

73-

Step2.Width

1516-PT for15"-widedrawer(forMeridian®pedestalsand5000Series

furniture)

1816-PT for18"-widedrawer(forMeridian®pedestals)

PricesforSteps1-2.

73-1516-PT $21

73-1816-PT $24

73-15! 73-18!

Mer

idia

n® V

erti

cal F

ile

Acc

esso

ries

==

==

==


DrawerDividerforBoxDrawer,Meridian®Pedestal

Product Information

Description

Thisadjustabledividerisusedinaboxdrawer.The12"-widedivider

fitsina15"-wideboxdrawer;the15"-widedividerfitsinan18"-widebox

drawer.Finishisblackumber.

Notes

DrawerdividercannotbeusedinTu®pedestalsorQuadrant®pedestals.

For5000Seriesfurniture,drawerdividercanbeusedinstandard-,

bevel-,orcontour-pullpedestals.

Dimensions


Step1.

73-

Step2.Width

1567-D for15"-widedrawer(forMeridian®pedestalsand5000Series

furniture)

1867-D for18"-widedrawer(forMeridian®pedestals)

PricesforSteps1-2.

73-1567-D $15

73-1867-D $18

73-15! 73-18!

==

==

==

Meridian® V



StationeryTrayforBoxDrawer,Meridian®Pedestal

Product Information

Description

Thissectionedtraystoresenvelopes,stationery,andformsinabox

drawer.The12"-widetrayfitsina15"-wideboxdrawer;the15"-widetray

fitsinan18"-wideboxdrawer.Finishisblackumber.

Notes

StationerytraycannotbeusedinTu®pedestalsorQuadrant®pedestals.

For5000Seriesfurniture,stationerytraycanbeusedinstandard-,

bevel-,orcontour-pullpedestals.

Dimensions


Step1.

73-7082-

Step2.Width

SST for15"-widedrawer(forMeridian®pedestalsand5000Series

furniture)

SST-SP for18"-widedrawer(forMeridian®pedestals)

PricesforSteps1-2.

73-7082- SST $107

SST-SP $119

73-70!

Mer

idia

n® V

erti

cal F

ile

Acc

esso

ries

==

==

==


FileDrawerOrganizer,Meridian®Pedestal

Product Information

Description

Thissectionedorganizerstoresletter-sizestationeryandpapersinafile

drawer.The12"-wideorganizerfitsina15"-widefiledrawer;the15"-wide

organizerfitsinan18"-widefiledrawer.Finishisblackumber.

Notes

FiledrawerorganizercannotbeusedinTu®pedestalsorQuadrant®

pedestals.

For5000Seriesfurniture,filedrawerorganizercanbeusedin

standard-,bevel-,orcontour-pullpedestals.

Dimensions


Step1.

73-9874-

Step2.Width

FDO for15"-widedrawer(forMeridian®pedestalsand5000Series

furniture)

FDO-SP for18"-widedrawer(forMeridian®pedestals)

PricesforSteps1-2.

73-9874- FDO $189

FDO-SP $227

73-98!

==

==

==

Meridian® V



FileDrawerOrganizer

Product Information

Description

This2-sectionedorganizerfitsintoanyfiledrawerarrangedforletter-

sizefiling.Theremovabletopsectionstorescomputerdisksandother

smallitems.Thebottomsectionstoreslargeritemsorcanbedivided

into3compartments;itincludes2verticaldividers.Finishisblack

umber.

Dimensions


Step1.

LG901 $84

LG901!

Mer

idia

n® V

erti

cal F

ile

Acc

esso

ries

==

==

==


EnhancedAccess™Pull

Product Information

Description

Thisplasticloop-stylepullslidesintothestandardpullorTu®W-pull

onapedestalorlateralfiledrawer.Itmakesthedrawereasiertoopen.

Packagecontains1pullandattachmenthardware.

Dimensions


Step1.

EAP-

Step2.PullStyle

L loop

PricesforSteps1-2.

EAP-L $54

Step3.Finish

BU blackumber +$0

HF innertonelight +$0

MT mediumtone +$0

EAP-L!

==

==

==

==

= M

eridian® Keyless Locks


KeylessLock

Product Information

Description

Thiskeylesslockreplacesanexistingcamlockandisavailablein2

modeoptions.Lockermodeallowsforatemporarycodetobeentered

foreachuse,andstationmodeallowsforrepeatedusewiththesame

code.Multipleorientationoptionsallowthekeylesslocktobeused

withavarietyofproducts.

Notes

Replacementbatteryisa3-voltlithiumCR2032battery.

Actuallockdimensionsare3.86"W×1.00"H×0.39"D.

Meridian®standardpull2600series,theTu®metalpedestal,andsome

Tumetallateralfileswillnotaccommodatethewidthofthekeyless

lock.

Orderthefollowingproductsseparately:

•Controlkeyfob(MKL-CKF)

•Userkeyfob(MKL-UKF)

ThiskeylesslockcanbefoundundertheMeridian®productlinecodeof

MS.

Dimensions


Step1.

MK A

Step2.Mode

L- lockermodeA

S- stationmodeA

Step3.Orientation

HL horizontal,keypadfacingleftA

HR horizontal,keypadfacingrightA

VU vertical,keypadfacingupA

VD vertical,keypadfacingdownA

PricesforSteps1-3.

MKL-HL $209

MKL-HR $209

MKL-VU $209

MKL-VD $209

MKS-HL $209

MKS-HR $209

MKS-VU $209

MKS-VD $209

Step4.Finish

0I silverA +$0

BK blackA +$0

MKL-H! MKL-V! MKS-H! MKS-V!

Mer

idia

n® K

eyle

ss L

ocks

==

==

==

==

=


KeylessLock,ControlKeyFob

Product Information

Description

Thiskeyfobopensthekeylesslockwithoutusingthenumerickeypad.

Notes


•Keylesslock(MK)

•Userkeyfob(MKL-UKF)

Thiskeylesslock,controlkeyfobcanbefoundundertheMeridian®

productlinecodeofMS.

Dimensions


Step1.

MKL-CKF A $180

MKL-C!

==

==

==

==

= M

eridian® Keyless Locks


KeylessLock,UserKeyFob

Product Information

Description

Thiskeyfobopensthekeylesslockwithoutusingthenumerickeypad.

Notes


•Keylesslock(MK)

•Controlkeyfob(MKL-CKF)

Thiskeylesslock,userkeyfobcanbefoundundertheMeridian®

productlinecodeofMS.

Dimensions


Step1.

MKL-UKF A $180

MKL-U!



IndexbyProductNameIndex: P

roduct Nam

e

Meridian® Vertical Files

Bevel-PullVerticalFilepage(s)10 page(s)10

DrawerDividerforBoxDrawer,Meridian®Pedestal16 16

EnhancedAccess™Pull20 20

FileDrawerOrganizer19 19

FileDrawerOrganizer,Meridian®Pedestal18 18

KeylessLock21 21

KeylessLock,ControlKeyFob22 22

KeylessLock,UserKeyFob23 23

PencilTrayforBoxDrawer,Meridian®Pedestal15 15

Standard-PullVerticalFile5 5

StationeryTrayforBoxDrawer,Meridian®Pedestal17 17



IndexbyProductNumberIndex: P

roduct Num

ber

34-15 Bevel-PullVerticalFilepage(s)10 page(s)10

34-18

36-15 Standard-PullVerticalFile5 5

36-18

73-15 DrawerDividerforBoxDrawer,Meridian®Pedestal16 16

73-15 PencilTrayforBoxDrawer,Meridian®Pedestal15 15

73-18 DrawerDividerforBoxDrawer,Meridian®Pedestal16 16

73-18 PencilTrayforBoxDrawer,Meridian®Pedestal15 15

73-70 StationeryTrayforBoxDrawer,Meridian®Pedestal17 17

73-98 FileDrawerOrganizer,Meridian®Pedestal18 18

EAP-L EnhancedAccess™Pull20 20

LG901 FileDrawerOrganizer19 19

MKL-C KeylessLock,ControlKeyFob22 22

MKL-H KeylessLock21 21

MKL-U KeylessLock,UserKeyFob23 23

MKL-V KeylessLock21 21

MKS-H

MKS-V

HermanMiller

HermanMiller October 2013

Appendix: 20

-Day or Less/A

ssigned Lead-Time O

rder Information

20-Day or Less/Assigned Lead-Time Order Information

20-Day or Less and Assigned Lead-Time Programs

20-day or less and assigned lead-time products are designed for

established Herman Miller dealers with pre-approved credit.

Products are distributed from multiple manufacturing facilities

across the United States. All products and options not designated by

an Assigned Lead-Time icon A will ship in 20 business days or less

after being acknowledged by Herman Miller. Products and options

designated by an A are on the assigned lead-time program and will

ship in 20 days, less than 20 days, or more than 20 days from order

acknowledgement.

Ordering Procedure

Please place orders through Order Manager. If this is not available to

you, place orders through mail or fax. Verbal purchase orders will not

be accepted.

Order Entry fax number for Passage®, 5000 Series, and Meridian®

Filing and Storage: (616) 846 9236.

Order Entry fax number for all other products:

(616) 654 3085.

For more information, contact your Customer Care representative at:

(866) 854 3048 ext 3400.

Shipments and Delivery

Per Herman Miller Terms and Conditions.

Changes and Cancellation

Per Herman Miller Terms and Conditions.

HermanMiller

HermanMiller April 2016

Appendix: Keyed-Alike Inform

ationKeyed-Alike Information

Keyed-Alike Locks

All components with locks may be specified keyed alike. Products with

keyed-alike locks will be shipped with lock chassis installed.

Installation of lock cylinders will be on-site according to instructions

provided. Herman Miller, Inc., will not be responsible for lock cylinder

installation.

When specifying product keyed-alike, include separate lines on your

order for the lock cylinders.

For Action Office®, Ethospace®, Passage®, Quadrant®, Resolve®, and

Supplemental products, list cylinder part number and key number

(232092-XXX); select a key number (or numbers) between 226 and 427,

excluding numbers 408 and 412.

The following products require a different lock cylinder part number.

Specify UKY001-XXX for these products only; select a key number (or

numbers) between 226 and 427, excluding numbers 408 and 412.

A3013.

A3053.

G5180.

G5181.

G5280.

The keys provided in 232092-XXX and UKY001-XXX kits work with

either cylinder type, provided the key numbers match.

For Tu® Storage, Canvas Office Landscape®, 5000 Series, and

Meridian® Storage, see the following charts.

Keyed-alike locks are field installed.

To order keyed-alike locks for Action Office® Series 1 and 2 door

panels, please contact Customer Care.

A master key can be used to open any lock on an attached or

freestanding component. In addition, a removal key or lock change tool

is required to remove lock plugs. Customers interested in ordering

master keys, removal keys, or lock change tools should contact

Customer Care.

For Canvas overhead and lower storage units, specify as follows:

Specification PartCode Number Color Lock Series

KA 1B2JK7-XXX1 chrome UM series 226-427

For Canvas Metal Storage, Meridian Storage, Tu Storage, and 5000 Series

desk components with pedestals, specify as follows:

Specification KeyCode Number Color Lock Series

KA 232092-XXX1 black UM series 226-427

KA 1B2JK7-XXX1 chrome UM series 226-427

For 5000 Series flipper door unit with bezel or credenza storage cabinet

with bezel, specify as follows:

Specification KeyCode Number Color Lock Series

KA 232092-XXX1 black UM series 226-427

Key Number:XXX1 = a key number between 226 and 427 (excluding 408 and 412)

App

endi

x: S

tain

-to-

Mat

ch P

rogr

am Stain-to-Match Program

Program Overview

The Stain-to-Match program gives you the option of using veneer

finishes that are not listed in the standard offering. The program allows

Herman Miller to match a customer’s existing recut or natural veneer, orcreate a new finish that is unique to an installation.

Specific information on approval, ordering, pricing, and warranty for the

Stain-to-Match program is listed below. Questions and requests for

assistance may be directed to Herman Miller Options at:

(800) 654 3910

Stain-to-Match Process

1. Fill out the Options Stain-to-Match Request Form and send along

with a color sample (2” x 3” minimum) to the Herman Miller OptionsApplications Team at the address provided on the form. The form

can be found on Omni.

2. Within 7-10 working days, Herman Miller Options will send a

sample of the color-matched stain on Herman Miller veneer to the

requester for the customer’s signed approval.

3. If the sample meets the customer’s approval, sign the reverse sideof the sample, scan and email the approval to:

[email protected].

4. After the stain has been approved, a formal quotation with special

number and pricing can be provided, or the product can be

specified through the Vary Easy program, if available. Work with the

Options team on final product needs and how to specify.

5. A purchase order can then be placed.

Stain-to-Match Warranty

Herman Miller warrants its products to be free from defects in

craftsmanship from the date of delivery for the applicable warranty

period. Herman Miller is responsible for the physical properties of the

veneers available through the Stain-to-Match program, which include:

STA: Stain-to-Match on Recut Ash

STB: Stain-to-Match on Beech

STC: Stain-to-Match on Cherry

STD: Stain-to-Match on Oak

STK: Stain-to-Match on Reltech Anigre (Geiger)

STM: Stain-to-Match on Recut Mahogany

STP: Stain-to-Match on Maple

STU: Stain-to-Match on Walnut (Geiger)

See your specification tool for product specific finish offering limitations.

Stain-to-Match Program

December 2016 HermanMiller

For more information about our products and services or to see a list of dealers, please visit us at HermanMiller.com or call (800) 851 1196.

© 2019 Herman Miller, Inc., Zeeland, Michigan

Distribution Rights

Working together since 1956, Herman Miller and Vitra are the authentic sources of designs by Charles and Ray Eames, Alexander Girard, and George Nelson. All the designs shown in this book are protected by law. Herman Miller has obtained all rights to make and sell these designs. Also, Herman Miller holds exclusive world-wide manufacturing and distribution rights for these products with the following exceptions:

Charles and Ray Eames, George Nelson, and Alexander Girard—Worldwide distri-bution rights for furniture in all areas except Europe and the Middle East. For those areas, please contact Vitra.

Isamu Noguchi—Worldwide distribution rights for the Noguchi Rudder Table. Distribution rights for the Noguchi Table in North America and Central America only. For all other areas, please contact Vitra.

Magis—Exclusive distribution rights in the US and Canada. For all other areas, please contact Magis.

Mattiazzi—Exclusive distribution rights in the US and Canada. For all other areas, please contact Mattiazzi.

® Z, Y, 3D Intelligent, AO, Action Office, Aeron, ArcSpan, Aside, Avall, Avive, Bubble Lamps, Canvas Office Landscape, Caper, Celle, Co/Struc, Daisyone, Distil, Eames, Eco-Dematerialized, Embody, Envelop, Equa 2, Ergon 3, Ethospace, Exclave, Fine-Tune, FlexFront, Flo, Formcoat, Formwork, Ground Cloth, Herman Miller for the Home, Herman Miller for Healthcare, Intersect, Kinemat, Lapjack, Layout Studio, Lifework, Limerick, Live Unframed, Living Office, Locale, Maharam, Meridian, Mirra, Passage, Pellicle, Perspectives, PostureFit, Public Office Landscape, Resolve, Rodney, Sayl, Setu, Thrive, Tu, Wishbone, and Y-Tower are among the registered trademarks of Herman Miller, Inc., and its owned subsidiaries.

™ 8Z Pellicle, About Face, AireWeave, Albert, Backfit, Bubbletack, Burdick Group, Butterfly Back, Celeste, Cellular Suspension, Clam, Compass, Connect, Cosm, Cubert, DOT, Duracare, Durawrap, Eames Soft Pad, EnhancedAccess, Everywhere, Flex-Edge, Flute, Harmonic, Herman Miller Select, Hopsak 2, Intent, Iota, Jaw, Keyless Entry, Keyn Chair Group by Herman Miller, Latitude, Lino, Locale, Logic Mini, Logic Power Access Solutions, Live OS, Loop, Lyris, Lyris 2, Made-to-Measure Storage, Metaform Portfolio, Mora, Motia, Multiscrim, Nelson, Nevi, Overlay, Pari, Pixelated Support, Plex, PostureFit SL, Prospect, Q, Renew, Sense, Soft Pad, Stackable, Stackable Storage, Striad, Swoop, Tone, TriFlex, Twist, Ubi, Verus, Vista and Wireframe are among the trademarks of Herman Miller, Inc., and its owned subsidiaries.

SM Herman Miller Options is among the service marks of Herman Miller, Inc.

Alexander Girard® is a registered trademark of The Alexander Girard Estate.

Chemsurf® is a registered trademark of Wilsonart International.

Corian® is a registered trademark of E. I. du Pont de Nemours and Company Corporation.

Crypton® is a registered trademark of Crypton, Inc.

DACRON® is a registered trademark of INVISTA S.a r.l.

Decora® is a registered trademark of Leviton Manufacturing Co., Inc.

Edelman® Leather is a registered trademark of Edelman Leather, Inc.

FENIX NTM® is a registered trademark of Arpa Industriale S.p.A.

FLEXNET™ is a trademark of Milliken & Company.

Floor Saver Glide® is a registered trademark of Carpin Manufacturing, Inc.

Geiger® is a registered trademark, and Bumper™, Saiba™, and Ward Bennett™ are trademarks, of Geiger International.

Goetz™ is a trademark of Mark W. Goetz.

Hang-It-All® is a registered trademark of Lucia Eames Demetrios, d.b.a. Eames Office.

Holophane® is a registered trademark of Holophane.

Ingeo™ is a trademark of Cargill Dow LLC.

iPad® is a registered trademark of Apple, Inc.

LifeSize® is a registered trademark of LifeSize Communications, Inc.

Magis®, Bombo®, and Me Too® are registered trademarks of Magis S.p.A.

Microsoft® and Natural® Keyboard are registered trademarks of Microsoft Corporation.

Noguchi® and the Noguchi table configuration (trade dress) are registered trade-marks, and Rudder Table™ is a trademark, of The Isamu Noguchi Foundation and Garden Museum.

Place Textiles® is a registered trademark of Place Textiles.

SuperSeat™ is a trademark of Dahti Seating, a division of ITW.

Documents

Price Book: Meridian Vertical Files