Prestigio Emporio Wireless HDMI Bridge PWHD01

Prestigio Emporio Wireless HDMI Bridge

PWHD01

Prestigio WHDMI manual_layout.indd 1 11/4/10 9:58 AM

2 Wireless HDMI

Table of ContentsIntroduction ��3Module View ��4

Transmitter �� 4Components Summary �� 5Receiver �� 6Components Summary �� 7Status Indicators �� 8Power Indicator (Left LED) �� 8Status Indicator (Right LED) �� 8

System Setup ��9Connection Examples �� 9Optimizing System Performance �� 10

System Connections ��11HDMI Connection (Transmitter) �� 11Power Connection (Transmitter) �� 11HDMI Connection (Receiver) �� 12Power Connection (Receiver) �� 12IR Blaster Connection �� 13IR Sensor Connection �� 13Consumer Electronics Control Connection �� 14

Specifications �� 16System Features �� 16Transmitter Specifications �� 17Receiver Specifications �� 18

Safety Information �� 19Electrical Warning �� 19Disposal Information �� 19Safety Instructions �� 20Usage Instructions �� 21HDMI & HDCP �� 24Macrovision �� 24FCC Statement �� 24CE Mark Warning �� 25


3User Guide

www�prestigio�com

Introduction

When fi rst unpacking your Wireless HDMI system please check to see if the following items are included:

Documents

1 2

3 4 5

6 7

1 WHDMI Transmitter 5 IR Sensor2 WHDMI Receiver 6 Power Adapter x 23 Product Documentation 7 HDMI Cable4 IR Blaster

Package Contents

Your Wireless HDMI system is a cable-free plug-and-play solution for extending any A/V sources utilizing HDMI, such as satellite boxes, digital video players, and gaming consoles, to remote displays such as High-Defi nition digital TVs.


4 Wireless HDMI

1 2

4 5 63

Transmitter

Module View


5User Guide


Module View

Status Indicator LED The status indicator allows you to monitor various system conditions� See the LED Indicators section for more information on the status indicator�

Power Indicator LED The power indicator allows you to monitor the power status of the system� See the LED Indicators section for more information on the power indicator�

Power Button The power switch turns ON and OFF the Wireless HDMI module� Actual behavior of the power switch can be customized in Windows Control Panel�

IR Blaster Port Connect the IR Blaster included with the wireless HDMI system to this port� The IR Blaster/Sensor enables the wireless HDMI system to control your HDMI devices by sending signals that mimic those of a remote control�

HDMI Port The HDMI port allows you to connect the output device to the transmitter using an HDMI cable� HDMI provides uncompressed all-digital audio/video signal that supports standard, enhanced, or high-defi nition video and multi-channel audio�

Power Connection PortThe power connection port allows you to power the module using the power adapter included with the system�** This port does not support traditional USB functions.

1

2

3

4

5

6

Components Summary


6 Wireless HDMI

Module View

1 2 3

4 5 6 7

Receiver


7User Guide


Module View

1

2

3

4

5

6

7

Infrared Sensor The infrared communication sensor allows convenient wireless control of the provided receiver using a wireless remote control�

Status Indicator LEDThe status indicator allows you to monitor various system conditions� See the LED Indicators section for more information on the status indicator�

Power Indicator LEDThe power indicator allows you to monitor the power status of the system� See the LED Indicators section for more information on the power indicator�

Power ButtonThe power switch turns ON and OFF the Wireless HDMI module� Actual behavior of the power switch can be customized in Windows Control Panel�

IR Sensor PortConnect the IR Sensor included with the wireless HDMI system to this port� The IR Blaster/Sensor enables the wireless HDMI system to control your HDMI devices by sending signals that mimic those of a remote control�

HDMI PortThe HDMI port allows you to connect the display device to the receiver using an HDMI cable� HDMI provides uncompressed all-digital audio/video signal that supports standard, enhanced, or high-defi nition video and multi-channel audio�

Power Connection PortThe power connection port allows you to power the module using the power adapter included with the system�**This port does not support traditional USB functions.

Components Summary


8 Wireless HDMI

LED Status

Solid Red Module Powered ON

No Color Module Powered OFF

Module View

Power Indicator (Left LED)

LED Status

Blinking Blue Establishing connection

Solid Blue Transmitter and receiver link established

No Color No link established

Transmitter

Receiver

Status Indicator (Right LED)

Status Indicators


9User Guide


System Setup

NOTE: These are example connections only

11;11

111

DVD Player Set-Top Box PC Gaming Console

HD TV Monitor Projector

Connection Examples


10 Wireless HDMI

System Setup

Optimizing System Performance

As with all wireless type products, the system’s performance can be affected by its environment and any obstruction between the transmitter and receiver� Follow the suggestions below to create an optimal environment for your new Wireless HDMI system� Proper placement of the receiver and transmitter units will ensure a strong connection for superior performance:

• Use one system per room, placing the transmitter and receiver units for each system in the same room�

• If you use a 5GHz WLAN or cordless phone, place those in a different room�

• Do not place either unit on a metallic rack�• Place the transmitter unit as high up as possible�• Maximum operating distance is approximately 20m or 65 feet with a

line of sight path, actual performance may vary depending on the user’s environment�

• Be sure to keep at least 30cm or 1 foot minimum distance between the transmitter and receiver units�

• Keep in mind the Wireless HDMI system may be affected by interference from other wireless products and/or signal attenuation (weakening) due to the proximity of certain objects/materials such as walls, fl oors, doors, and other construction materials that contain metal� Large home appliances may also affect performance such as refrigerators, washers and dryers�


11User Guide


Power Connection (Transmitter)

HDMI Connection (Transmitter)

11;11


System Connections


12 Wireless HDMI

System Connections

HDMI Connection (Receiver)

Power Connection (Receiver)



13User Guide


*The system’s receiver features a built-in IR sensor that allows for direct remote control use. You may also connect an external IR sensor either separately or for simultaneous use with the internal IR sensor.

System Connections

Receiver Side*Transmitter Side

IR Blaster Connection IR Sensor Connection

In home theater settings IR blasters are used to distribute signals to all components that are normally controlled only by remote control� They are essential if the components are placed in different rooms or behind cabinet doors�

11

When connecting please ensure that you place the IR Blaster in close proximity to the display device and the IR Sensor in an area accessible to the remote control’s infrared signal.

Front View


14 Wireless HDMI

System Connections

Your WHDMI system includes the Consumer Electronics Control (CEC) feature� CEC is a set of commands that utilizes HDMI’s two-way communication to allow for single remote control of any CEC-enabled devices connected with HDMI� The HDMI-CEC allows up to ten AV devices to discover and communicate with one another over a HDMI connected system�

The feature is designed to allow the user to command and control multiple CEC-enabled boxes with one remote control and for individual CEC-enabled devices to command and control each other without user intervention� For example, CEC includes one-touch play, so that pressing play on the DVD will trigger the necessary commands over HDMI for the entire system to power on and auto-confi gure itself to respond to the command.

Figure 1: System on standby.

Figure 2: One-touch play using CEC to turn on all system components.

Consumer Electronics Control Connection


DVD Player

11;11

11;11

HDMI

Transmitter

HD TV

HDMI

Receiver

DVD Player

11;11

11;11

HDMI

Transmitter

HD TV

HDMI

Receiver

TIP: To acquire a link quickly, turn the receiver on fi rst than turn the transmitter on shortly after.

Minimum distance: 2 meters


15User Guide


System Connections

In the case of using a remote controller, pointing the I/R remote at the HD TV and pressing a single button (e�g�, ‘Play Movie’) will trigger the HD TV to command all system components to initiate playback via CEC�

Figure 3. Activating CEC by pressing the play button on remote


DVD Player

11;11

11;11

HDMI

HD TV

HDMI


16 Wireless HDMI

Specifi cations

System Features

• 128bit AES Encryption for secured wireless video transmission

• Motion JPEG compression Technology

• 40 meter LOS transmission system

• 20 - 30ms System Latency

• Supports: IR Blasting / 802�11h DFS / HDMI 1�3 / HDCP 1�1 & 1�2 / CEC


17User Guide


I/O Connectors1x HDMI Output (19 pins, Type A)1x 3�5mm Jack (IR Blaster)1x USB Power Connector

Resolution Support

Resolution Frame rate Ratio640x480P 60Hz 4:3720x480P 59�94Hz/60Hz 4:3/16:91280x720P 50Hz 16:91280x720P 59�94Hz/60Hz 16:9720x576P 50Hz 4:3/16:91920x1080P 50Hz 16:91920x1080P 23�97Hz/24Hz 16:91920x1080P 25Hz 16:91920x1080P 29�97Hz/30Hz 16:91920x1080P 50Hz 16:91920x1080P 59�94Hz/60Hz 16:9

IR Blasting Frequency 38KhzHDMI Version HDMI 1�3HDCP Version HDCP 1�2

LEDPower ON/OFFSignal Link

Antenna MIMO 2T3R

Power AdapterAC Input: 100V - 240V (50 - 60Hz)DC output: 5V/2A

Operating Temperature 0 - 35ºC

Transmitter Specifi cations

Specifi cations


18 Wireless HDMI

Specifi cations

I/O Connectors

1x HDMI Output (19 pins, Type A)1x 3�5mm Jack (IR Receiver)1x IR Sensor1x USB Power Connection Port

Resolution Support

Resolution Frame rate Ratio640x480P 60Hz 4:3720x480P 59�94Hz/60Hz 4:3/16:91280x720P 50Hz 16:91280x720P 59�94Hz/60Hz 16:9720x576P 50Hz 4:3/16:91920x1080P 50Hz 16:91920x1080P 23�97Hz/24Hz 16:91920x1080P 25Hz 16:91920x1080P 29�97Hz/30Hz 16:91920x1080P 50Hz 16:91920x1080P 59�94Hz/60Hz 16:9

IR Blasting Frequency 38KhzHDMI Version HDMI 1�3HDCP Version HDCP 1�2

LEDPower ON/OFFSignal Link

Antenna MIMO 2T3R

Power AdapterAC Input: 100V - 240V (50 - 60Hz)DC output: 5V/2A

Operating Temperature 0 - 35ºC

Receiver Specifi cations


19User Guide


Safety Information

Electrical Warning

RISK OF ELECTRIC SHOCKDO NOT OPEN

This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock� For the safety of everyone in your household, please do not remove product covering�

The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems�

WARNING: To reduce the risk of fi re or electric shock, this device should not be exposed to rain or moisture and objects fi lled with liquids, such as vases, should not be placed on this device�

Disposal Information

IMPORTANT: This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.


20 Wireless HDMI

Safety Information

Safety Instructions

1� Read these instructions�

2� Keep these instructions�

3� Heed all warnings�

4� Follow all instructions�

5� Do not use this device near water�

6� Clean only with dry cloth�

7� Do not block any ventilation openings� Install in accordance with the manufacturer’s instructions�

8� Never block the ventilation holes by placing the equipment on a bed, sofa, rug or other similar surfaces�

9� Never push objects of any kind into the equipment through the ventilation holes as they may touch dangerous voltage points or shot out parts that could result in a fi re or an electric shock. Never spill liquid of any kind on the equipment�

10� Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifi ers) that produce heat.

11� Please ensure that the wall outlet is installed near the equipment and shall be easily accessible�

12� Be sure to use the supplied AC power adapter and power cord�

13� Do not use any other AC power adapter� It may cause a malfunction�

14� Connect the AC power adapter to an easily accessible wall outlet�

15� Do not coil the AC power cord around the AC power adapter� The core wire may be cut and/or it may cause a malfunction of the equipment�

16� Do not touch the AC power adapter with wet hands�


21User Guide


17� If you notice an abnormality in the AC power adapter, disconnect it from the wall outlet immediately�

18� The set is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the set itself has been turned off�

19� Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the device�

20� If the surface of the equipment cracks, do not touch the equipment until you unplug the AC power cord, otherwise electric shock may result�

21� Only use attachments/accessories specifi ed by the manufacturer.

22� Unplug this device during lightning storms or when unused for long periods of time�

23� Refer all servicing to qualifi ed service personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped�

24� The device should not be exposed to dripping or splashing�

25� Do not place any sources of danger on the device (e.g. liquid fi lled objects, lighted candles)�

26� This product may contain lead and mercury� Disposal of these materials may be regulated due to environmental considerations� For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www�eiae�org�

Usage Instructions

AC power cord and other cablesIf you damage the AC power cord or other cables, it may result in a fi re or an electric shock� If the AC power cord or any other cables is damaged, stop using it at once and contact the service center�

Safety Information


22 Wireless HDMI

• Do not place the equipment where the power cord and cables are subject to wear or abuse�

• Do not pinch, bend, or twist the cord excessively� The core lines my be bared and cut, and cause a short-circuit, resulting in a fire or an electric shock�

• Do not convert or damage the power cord and cables�• Do not allow anything to rest on or roll over the power cord and cables�• Do not move the equipment with the power cord and cables plugged in�• Keep the power cord and cables away from heat sources�• Be sure to grasp the plug when disconnecting the power cord and cables�• Do not place the equipment in an area where the cables may become

entangled and catch on your feet or hands�

Wall outletDo not use a poor fitting outlet. Insert the plug fully into the outlet. If it is loose, it may cause arcing and result in a fire. Contact your electrician to have the outlet changed�

Cable wiringFor your safety, unplug the AC power cord when wiring cables� Take care not to catch your feet on the cables� It may damage the equipment�

Electric shockDo not touch the AC power cord or the equipment with a wet hand� If you plug/unplug the AC power cord from the equipment with a wet hand, it may cause electric shock�

LightningFor added protection for this equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet� This will prevent damage to the equipment due to lightning and power line surges�

Cleaning• Clean the AC power plug regularly�

Safety Information


23User Guide


• If the plug is covered with dust and it picks up moisture, its insulation may deteriorate and result in a fire.

• Unplug the AC power cord when cleaning this equipment� If not, it may result in electric shock�

• Clean the casing of the equipment with a dry soft cloth� Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water� Never use strong solvents such as thinner or benzene for clothing�

• If using a chemically pretreated cloth, please follow the instruction provided on the package�

• Dust the ventilation holes with a dry cloth�

Installation• The equipment should be installed near an easily accessible power outlet�• Do not install the equipment in a hot or humid place, or in a place subject to

excessive dust or greasy vapor�• Make sure that the cord and connected cables are placed so that tripping or

stumbling may be avoided�

Safety Information


24 Wireless HDMI

Safety Information

HDMI & HDCP

This equipment incorporates High-Defi nition Multimedia Interface (HDMI™) technology. HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC�

Macrovision

This product incorporates copyright protection technology that is protected by U�S� patents and other intellectual property rights� Use of this copyright protection technology must be authorized by Macrovision corporation, and is intended for home and other limited consumer uses only unless otherwise authorized by Macrovision� Reverse engineering or disassembly is prohibited�

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications� However, there is no guarantee that interference will not occur in a particular installation� If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna�• Increase the separation between the equipment and receiver�• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected�• Consult the dealer or an experienced radio/TV technician for help�

CAUTION: Any changes or modifi cations not expressly approved by the grantee of this equipment could void the user’s authority to operate this equipment�


25User Guide


Safety Information

CE Mark Warning

This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures�


26 Wireless HDMI


27User Guide



Discover more exciting high technology lifestyle

accessories at

www.prestigio.com

This is a publication by Prestigio. No content may be reproduced or copied with explicit permission of Prestigio. All images and product specification are subject to change without prior notice.

All trademarks are property of their respective trademark owners.

2010 Prestigioc
