Pressure Control Group-1 Bore Sizes 7-¹/16” to 11”

“From the Crown...... .......to the Ground”

Pressure Control GroupOur supply stores carry a complete range of pressure control components. We inventory complete Hydril pulsation dampeners and RS BOP stacks. In addition we have a full range of replacement parts and accessories. Our staff is here to make sure that you receive the correct components for your application.

Packing UnitsHydril and RSPulsation Dampener Bladder Hydril K-20 5000, K-10 3000Emsco PD-53 & PD-55

Ram Rubbers 11”-3000, 11”-5000, 13”-3000, 13”-5000.H&H and RS

BOP Ram BlocksRS brand

BOP Studs RS brand

Ram Rubbers

Packing Units

Pulsation Dampener Bladder

Pressure Control Components

Spring isolator

Wear Plate

Packing Unit

Head

Open Chamber

Piston

Closing Chamber

Cutaway View of Screwed Head GK BOP withPacking Unit Fully Open

HYDRIL GK®ANNULAR BLOWOUT PREVENTER

Pressure Control Group-1 Bore Sizes 7-¹/16” to 11”

Pressure Control Group Ram Blocks

BORE SIZE (7-⅟ to 11 inches) 7-⅟ †9 9 11

WORKING PRESSURE (psi) 3,000 5,000 10,000 15,000 20,000 3,000 5,000 10,000 3,000 5,000 5,000 10,000

HEAD TYPE SCREWED LATCHED SCREWED

OLD NOMINAL SIZE 6” - 8” - 10” -

SHELL TEST PRESSURE Factory Only 6,000 10,000 15,000 22,500 30,000 6,000 10,000 15,000 6,000 10,000 15,000

OPERATING CHAMBER TEST PRESSURE Factory Only

3,000 5,000 10,000 15,000 20,000 3,000 5,000 10,000 3,000 5,000 10,000

*OPERATING CHAMBERVolume (Gal)for full piston stroke

CLOSINGOPENING

2.85 2.24

3.86 3.30

9.427.08

11.27.50

10.97.20

4.333.41

6.845.80

15.911.95

7.435.54

9.817.98

25.1018.97

FULL PISTON STROKE (inches) 4-⅛ 4-½ 5-½ 5-¾ 6-¾ 6-⅛ 7-⅛ 8

BODY DIAMETER (inches) 26 29-¼ 43-¾ 50 55 28 34 50-½ 33-¾ 37-½ 42-¼ 56-½

CLEARANCE DIAMETER (inches) 32-¼ 35-¾ 49-½ 61 58 34-½ 41 56-¾ 40 44-¼ 61-½

**HEIGHT (inches)

FLANGED BOTTOM

32 36-⁄10M:48-⅛15M:48-¾

54-⅛ 59 37-⁄ 41-¾ 55-¾ 39-¾5M:47-⁄10M:48-⁄

5M:48-¼10M:49

10M63-½15M:65-⁄

STUDDEDBOTTOM

27-¾ 30-¾ AOR 45-⁷⁄ 48-⁄ 32-¾ 34-¾ 48-⅛ 34-⁄5M:39-⁄10M40-¼

5M:40-⁄10M:40-⁄

10M:55

C/W HUB BOTTOM

31-⅛ 34-⁄10M:47-⅛15M:AOR

AOR - 5M:36-⅞ AOR -38-⅛

10M: AOR5M:820010M AOR

45-⁄10M:61-⅛15M:AOR

**weight (Ibs) approximate

FLANGED BOTTOM

2715 4000 12200 14250 23000 3500 6000 18540 55005M:44-⁄

AOR

AOR

10M:2614015M:AOR

STUDDED BOTTOM

2585 3785 AOR 22000 3300 5700 18340 51405M:820010M:AOR

25460

C/W HUB BOTTOM

2505 3850 11900 AOR - 5M:3450 AOR - 53505M:792010M:AOR

10M:2600015M:26100

STANDARD RING GROOVES

FLANGED

RX45

RX46

10M:BX15615M:BX156

BX156

RX49

RX50 BX157

RX53

5M:RX5410M:BX158 5M:RX54

10M:BX158

10M:BX15815M:BX158

STUDDED -5M:RX54

10M:BX15810M:BX158

C/W HUB BX156 - AOR - 5M:RX53 5M:RX5310M:BX15815M:BX158

* 15,0000 psi Shell w/10,0000 psi Packing Unit 1” NPT hydraulic connections are standard, 1-¼” or 1-½” on request Information Only † Older models may have 8-⁄ boreAOR Available On Request †† Older models have 9-¾ piston stroke with 34.53 gallon closing chamber volume and 24.66 opening chamber volume** With standard studded top connection rated to BOP working pressure Ω Reference only replaced by GX

NORTH TEXAS OFFICE CORPORATE OFFICES 14400 Highway 171 2002 Maurice Road Cresson, Texas 76035 Odessa, Texas 79760 WWW.BRIDGESEQUIPMENT.COMPhone: 817.396.4340 432.333.9741Fax: 817.396.4388 432.333.3042

BRIDGES EQUIPMENT LTDBridges Equipment has been providing new and used equipment along with quality service to the oil and gas drilling industry since 1984. We are a company dedicated to supplying quality products, service and support, all at a fair price. Our slogan means what it says. We supply all that the drilling rig requires......

“From the Crown...... ...........to the Ground”

Bridges Equipment product, service offerings and resources include: • Located on over 80 acres, our main facility in Odessa, TX is equipped to provide our customers with all their equipment needs. • New Equipment ranging from complete rigs and drawworks to triplex mud pumps and traveling equipment. We also offer new rotary tables, swivels and BOP’s. • Complete reconditioning facilities with the capability to return most drilling equipment to O.E.M. specifications. • Full service machine shops to guarantee on time, accurate delivery and quality of supply. • Expert unitization of new and reconditioned triplex mud pumps. • Capabilities to fabricate custom skids to meet you needs, however unique the application.Our supply stores specialize in supplying all the equipment the oil and gas drilling equipment industry requires to operate and support their activities. In addition to our Odessa store, we have a facility in Cresson, TX, to serve customers in that region Bridges Equipment maintains a full range of triplex mud pump packages as part of an extensive rental fleet.

Pressure Control Group-2 Bore Sizes 11” to 16 3/4”

“From the Crown...... .......to the Ground”

Ram Rubbers

Packing Units

Pulsation Dampner Bladder

Pressure Control Components

Spring isolator

Wear Plate

Packing Unit

Head

Open Chamber

Piston

Closing Chamber

Cutaway View of Screwed Head GK BOP withPacking Unit Fully Open

HYDRIL GK®ANNULAR BLOWOUT PREVENTER

Pressure Control GroupOur supply stores carry a complete range of pressure control components. We inventory complete Hydril pulsation dampeners and RS BOP stacks. In addition we have a full range of replacement parts and accessories. Our staff is here to make sure that you receive the correct components for your application.

Packing UnitsHydril and RSPulsation Dampner Bladder Hydril K-20 5000, K-10 3000Emsco PD-53 & PD-55

Ram Rubbers 11”-3000, 11”-5000, 13”-3000, 13”-5000.H&H and RS

BOP Ram BlocksRS brand

BOP StudsRS brand

Pressure Control Group-2 Bore Sizes 11” to 16 3/4”

Pressure Control Group Ram Blocks

BORE SIZE (11 to 16-¾ Inches) 11 Ω 13-⁵⁄ HL 13-⁵⁄ 13-⁵⁄ Ω 16-¾ 16-¾

WORKING PRESSURE (psi) 3,000 *10/15,000 3,000 5,000 10,000 2,000 3,000 5,000

HEAD TYPE LATCHED SCREWED LATCHED SCREWED LATCHED SCREWED LATCHED SCREWED LATCHED

OLD NOMINAL SIZE - 12 - 16 -

SHELL TEST PRESSURE Factory Only 15,000 22,600 6,000 10,000 7,500 15,000 3,000 45,000 10,000

OPERATING CHAMBER TEST PRESSURE Factory Only

10,000 3,000 5,000 3,000 10,000 3,000 5,000

*OPERATING CHAMBER

CLOSINGOPENING

25.1018.97

26.6720.45

11.368.94

17.9814.16

17.98††26.50

††37.18††26.50

††37.1812.59

17.4615.80

21.0215.80

28.7019.93

Volume (Gal)

(For Full Piston Stroke)

FULL PISTON STROKE (inches) 8 8-½ 7-⅛ 8-½ ††10-½ 8-½ 9 10-½

BODY DIAMETER (inches) 58 64-¾ 40-½ 45-¼ 45-½ 47-¾ 44 61 63-½ 46-¼ 48-½ 53-½ 54-½

CLEARANCE DIAMETER (inches) 60-¾ 69-¾ 47-½ 52-¼ 48-½ 68-⅛ 53-¼ 55-½ 59-½

**HEIGHT (inches)

FLANGED BOTTOM

10M:63-⅜15M:AOR

72-⁄ 45-¼5M:54-⅛

10M56-⁄5M:54-½

10M:59-⁄-

71-⅜ 71-⁄ 49-½ 57-⅞ 61-¼ 61-⁄

STUDDED BOTTOM

10M:54-⅞15M

60-⅞ 39-⅜5M:46-½

10M:46-½5M:AOR

10M:AOR60-⅝ 61-⅛ 43-¾ 47-¼ 53 53-⁄

C/W HUB BOTTOM

10M:6115M:60-¼

67-⅞ 435M:51-½

10M:51-½5M:51-⅞

10M:51-⅞46 66-⅞ 66-⁄ 46-½ - 59-⅞ 59-⁄

**weight (lbs) approximate

FLANGED BOTTOM

AOR 8784

AOR

5M:1380010M:14500

5M:1325010M:13900

-

33,525

AOR

11,417 14,868 20,835 21,230

STUDDED BOTTOM

AOR 35,350 85225M:13100

10M:AOR 32,850 11,100 14,470 20,000 20,400

C/W HUB BOTTOM

AOR 8650 AOR 9400 32,785 33,377 11,317 - 20,545 20,950

STANDARD RING GROOVE

FLANGED 10M:BX15815M:BX158

BX158 RX575M:BX160

10M:BX159

-

BX159 RX65

RX66

BX162

BX162

STUDDED 10M:BX158 -

C/W HUB10M:BX15815M:BX158

BX160 - BX162

* 15,000 psi Shell w/10,000 psi Packing Unit 1” NPT hydraulic connections are standard, 1-¼” or 1-½” on request Information Only † Older models may have 8-⁄ boreAOR Available On Request †† Older models have 9-¾ piston stroke with 34.53 gallon closing chamber volume and 24.66 opening chamber volume** With standard studded top connection rated to BOP working pressure Ω Reference only replaced by GX

NORTH TEXAS OFFICE CORPORATE OFFICES 14400 Highway 171 2002 Maurice Road Cresson, Texas 76035 Odessa, Texas 79760 WWW.BRIDGESEQUIPMENT.COMPhone: 817.396.4340 432.333.9741Fax: 817.396.4388 432.333.3042

BRIDGES EQUIPMENT LTDBridges Equipment has been providing new and used equipment along with quality service to the oil and gas drilling industry since 1984. We are a company dedicated to supplying quality products, service and support, all at a fair price. Our slogan means what it says. We supply all that the drilling rig requires......

“From the Crown...... ...........to the Ground”

Bridges Equipment product, service offerings and resources include: • Located on over 80 acres, our main facility in Odessa, TX is equipped to provide our customers with all their equipment needs. • New Equipment ranging from complete rigs and drawworks to triplex mud pumps and traveling equipment. We also offer new rotary tables, swivels and BOP’s. • Complete reconditioning facilities with the capability to return most drilling equipment to O.E.M. specifications. • Full service machine shops to guarantee on time, accurate delivery and quality of supply. • Expert unitization of new and reconditioned triplex mud pumps. • Capabilities to fabricate custom skids to meet you needs, however unique the application.Our supply stores specialize in supplying all the equipment the oil and gas drilling equipment industry requires to operate and support their activities. In addition to our Odessa store, we have a facility in Cresson, TX, to serve customers in that region. Bridges Equipment maintains a full range of triplex mud pump packages as part of an extensive rental fleet.