Upload
sng1881
View
33
Download
0
Embed Size (px)
DESCRIPTION
Marine Pressure Calibrators
Citation preview
@Tel. 351 21 27 40606Fax351 212'740897
Medium: Air.
Calibration due: 1 8,02-2014
Soc. Com. Equipamentos de Controlo, Lda.Instrumentation - Automation - Control
Rua ConceigAo Sameiro Antunes, 2682805-122 ALM^D^ Portugal
GERTilF[@ATE
Ref.: M/T "GENMAR ST. NIKOLAS"Dale: 1810212013Serviced by: Carlos Augusto
We hereby cediry that the SUIVIfIER/I4 Vacuum Gauge, for Si Pressure calibrator,Range: 0 to -760mmHg, has been calibration checked against standard, with thefollowing results:
Metrology requirements of Bourdon type pressure gauge:Standard no. EN837-1Subdivision minimum: 20 mmHg (resolution)
ENFM Press. Gauge Cal. Ref. Press. Gauge
-50 mmHg -48,9 mmHg
-100 mmHg -98,3 mmHe
-200 mmHg -198,1mmH9
-300 mmHg -297,6 mmHg
-400 mmHg
-500 mmHg
-397,8 mmHg
-497,O mmHg
-600 mmHg -603,5 mmHg
-700 mmHg -710,2 mmHg
- The readings are within the manufacturer's specified accuracy.
Reference Press. Gauge: KELLER, LEXI/ serial no. 2593Uncertainty: 0.01% FS
Traceability: Laborat6rio Nacional de Metrologia certificate no 512j2103971
Room Temperature = 22,1oC
,/. O A,\At)\
a- ,/,1:./ .4.(t^/,/ ./ A-Pt
ngrneer
lEil
IEIIEI EII@ilEIEilE @ilE IE!ilE!IEU t@I@IE!IE!il84 EItEilEl
ControliS
Tel. 351 21 27 40606Fax35l 21 2740897
Soc. Com. Equipamentos de Controlo, Lda.Instrumentation - Automation - Control
Rua Conceig6o Sameiro Antunes, 26E2805-122 ALMADA
FIGATE
Portugal
Cert. no.Ref.: M/T "GENMAR ST. NIKOLAS"Dale: 18102120'13Serviced by: Carlos Augusto
We hereby certify that the Si, Hydraulic Hand Held Pressure Calibrator.Type HTPI - Range: 0 to 700bar.Press. gauge: Sika model: LEO2, serial no- 021837Range: 0 to 700 bar / Resolution: 0,1 bar / Accuracy: 10,1% Full Scale.lnstrument has been checked and calibrated with the following results:
SIKA Press. Gauge Ret. Press. Gauge
5,0 bar 5,0 bar
25,0 bat 25,0 bar
50,0 bar 50,0 bar
100,0 bar 100,0 bar
200,0 bar 200,1 bat
300,0 bar 300,1 bar
400,0 bar 400,2 bar
500,0 bar 500,3 bar
600,0 bar 600,3 bar
700,0 bar 700,3 bar
Accuracy of readings is within manufacturer's specification-Medium: OilReference Gauge: KELLER LEX10 serial no. 4968'1
Uncertainty: 0.05% FST.aceability; Laborat6rio Nacional MetroCalibration due: 1a.O2.2O1 4
no.213.121651384
tEil
EEEEEEEEEEEEEEEElGit!=l
EE@
Eq6E6EEE6
lEil
EllGil
lEil
El
Elt=lErl
ffiffiEit
qE@
EEEEEEEEEEEEEEEtsl
tEu Ell EU ElilEIElilEt EIIIE lrEiltElltElrElrE EIIE @t @IE!IE!
ControliS\'*-/
Soc. Com. Equipamentos de Controlo, Lda.
Te1.35121 2740606Fax351 21 2740897
Instrumentation - Automation - Control
Rua Conceiqdo Sameiro Antunes, 26E2805-i22 ALMADA Portugal
GERTIFIGATEcert. no. Sddi4li,3.Ref.: M/T "GENMAR ST. NIKOLAS"Dale: 1810212013Serviced by: Carlos Augusto
We hereby ceftiry that lhe ENFM Pres-sure Gauge,calibntof, Range: 0 to 40 Bar, has been calibrationthe lollowing results:
Metrology requirements of Bourdon type pressure gauge:Standard no. EN837-'lSubdivision minimum: 1 bar (resolution)
ENFM Press. Gauge Cal. Ref. Press. Gauge
2 Bar 2,781 Bat
5 Bar 5,161 Bar
10 Bar 10,008 Bar
15 Bar 14,950 Bar
20 Ber 19,920 Bar
25 Bar 24,894 Bar
30 Bar 29,877 Bar
40 Bar 39,853 Bar
- The readings are within the manufacturels specified accuracy.
Reference Press. Gauge: KELLER, LEXI/ serial no. 2593Uncertainty: 0.01% FS
Traceability: Laborat6rio Nacional de Metrologja certificate no. 512.12103971
Room Temperature = 22,1oC
Medium: Air.
Calibration due: 14,02,2014
model @/ for Si Pressurechecked against standard, with
,,,i-at're+\+, "4
neer
ControliS\\--lSoc. Com. Equipamentos de Controlo, Lda,
Tel.351 21 2740606Fax35121 274O897
Cert. no. 3370/13Ref.: M/T "GENMAR ST. NIKOLAS"Dale. 1910212013Serviced by: Carlos Augusto
We hereby certify that the MS Pressure Gauge forref- (1208-5), Range: 0 to 3,5 MPa, seial no, 6013531,against standard, with the following results:
Metrology requirements of Bourdon type pressure gauge:Standard no. EN837-1Class Precision: Kl. '1,5
Subdivision minimum: 0,1 MPa (resolution)
Instrumentation - Automation - Control
Rua Conceigao Sameiro Antunes, 26E2805-122 ALMADA Portugal
Boiler Drum Sfeam Press.has been calibration checked
NKS Press. Gauge Cal. Ref. Press. Gauge
0,2 MPA 0,202 MPa
0,5 MPA 0,502 MPa
1,0 MPA 1,002 MPa
1,5 MPA 1,513 MPa
2,0 MPA 2,014 MPa
2,5 MPA 2,514 MPa
3,0 MPA 3,014 MPa
4,0 MPA 4,015 MPa
- The readings are within the manufacturer's specified accuracy.
Reference Press. Gauge: KELLER, LEXI/ serial no. 2593, Uncertainty: 0.01% FS
Traceabil;ty: Laborat6rio Nacional de Metrologia certifjcate no.512.12103971Room Temperature = 17,2'CMedium: Air.
Calibration due: 19.O2.2O1 4
Servlcd
Soc. Com. Equipamentos de Controlo, Lda.Instrumentation - Automation - Control
Rua Conceigdo Sameiro Antunes, 26E2805-122 ALMADA Portugal
/,:\ T= r:\-:t n T= n /:\ ^
E f-I{:t=tlt | |t:lllt:/A\ | ]=\:./L-]UU U ULI U\:./l-r-!] LJ LJ
Cert. no. 337{113Ref.: M/T .,GENMAR ST. NIKOLAS"Date: 1910212013Serviced by: Carlos Augusto
We hereby certify that the /VKS Pr€-ssur€ Gauge forref. (1208-P), Range: 0 to 3,5 MPa, seial no. 601479,against standard, with the following results:
Metrology requirements of Bourdon type pressure gauge:Standard no. EN837-1Class Precisioni Kl. 1,5Subdivision minimum: 0,'1 MPa (resolution)
Tel.35l 21 2740606Fax351 21 2740897
Boiler Drum Sfeam Press.has been calibration checked
NKS Press. Gauge Cal. Ref. Press. Gauge
0,2 MPA 0,204 MPa
0,5 MPA 0,504 MPa
1,0 MPA 1,004 MPa
1,5 MPA 1,505 MPa
2,0 MPA 2.005 MPa
2,5 MPA 2,515 MPa
3,0 MPA 3,016 MPa
4,0 MPA 4.016 MPa
- The readings are within the manufacturer's specified accuracy.
Reference Press. Gauge: KELLER, LEXl/ serial no. 2593, Uncertainty: 0.01% FS
Traceability: Laboratorio Nacional de lvletrologiatqrtificate no. 512j2103971Room Temperature = 17,2oC
Medium: Air.Calibration due: 19.02.201 4
T
Contr