Presents Hospital Design Concepts ATIENT LLLLIFTING ...€¦ · Safe Patient Lifting In-room Transfer System (S.P.L.I.T.S.) • Roll patient and insert bottom and back pads • Attach

SSSSSSSSAFEAFEAFEAFEAFEAFEAFEAFEPPPPPPPPATIENTATIENTATIENTATIENTATIENTATIENTATIENTATIENT

LLLLLLLLIFTINGIFTINGIFTINGIFTINGIFTINGIFTINGIFTINGIFTING

IIIIIIIINNNNNNNN--------ROOMROOMROOMROOMROOMROOMROOMROOM

TTTTTTTTRANSFERRANSFERRANSFERRANSFERRANSFERRANSFERRANSFERRANSFER

SSSSSSSSYSTEMYSTEMYSTEMYSTEMYSTEMYSTEMYSTEMYSTEM

BENCHMARK

ENGINEERING

GROUP, INC.

Presents

Hospital Design Concepts

Benchmark Engineering Group is an innovation design company

implementing advancements in many areas such as automotive, steel,

and glass manufacturing, telecommunications, and health care facilities.

As the medical industry goes through many technical advancements in medicine and treatments, the industry is finding a need for better and

safer patient care technology.

Hospitals have recognized the need for better and safer patient moving, in fact many Hospital’s Health and Safety Dept. indicated that over 50% of

the Hospital’s employee injuries are caused during patient moving.

Through our Hospital

engineering experience

Benchmark has developed an advanced

patient moving technology system.

S. P. L. I. T. S.S. P. L. I. T. S.S. P. L. I. T. S.S. P. L. I. T. S.S. P. L. I. T. S.S. P. L. I. T. S.S. P. L. I. T. S.S. P. L. I. T. S.Safe Patient Lifting In-room Transfer System

BENCHMARK

ENGINEERING

GROUP, INC.

Hospital patient moving has been a difficult but necessary problem

for all medical facilities.

Most moving methods rely

on human muscle power…

… or some impractical and

awkward sling methods…

… leaving the patient and/ or

hospital employee vulnerable to

injury.


BENCHMARK

ENGINEERING

GROUP, INC.


BENCHMARK

ENGINEERING

GROUP, INC.

Benchmark has developed the solution for Inter-room patient mobilityAllowing one staff person to move any sized patient at any time.

Safe Patient Lifting In-room Transfer System

(S.P.L.I.T.S.)

• Roll patient and insert bottom and back pads

• Attach lift straps to monorail trolley

• Use the control pendent to raise back pad to sitting position

• Raise entire patient off bed (3” to 6”)

• Move patient on powered monorail to wheelchair / gurney area, toilet, or shower.

• Set patient down and disconnect monorail trolley straps


BENCHMARK

ENGINEERING

GROUP, INC.

MONORAIL

LIFT OUT OF BEDPRONE IN BED INSERT AND

LIFT PADS

RAISE TO

POSITION WHEELCHAIR

MOVE AND& MOVE ON LOWER INTO SITTING CONNECT

• Supports patient in critical lifting and support points

• Modular system – bottom pad can be utilized on wheelchair, gurney, toilet and in shower

• Quick attach and disconnect straps – pads stay with patient and can be reconnected for the next move.

• One person operations - Roll patient to side and set both pads, roll back and hook up to lifting system

Biomechanics:


BENCHMARK

ENGINEERING

GROUP, INC.

& BACK OF THIGH

SUPPORT BUTTOCKS

BACK W/ NECK BRACE

SUPPORT HEAD & UPPER& BACK OF THIGH

SUPPORT BUTTOCKS

BACK W/ NECK BRACE

SUPPORT HEAD & UPPER

WINCH #1 CONTROLS

HEAD AND BACK RAISING

WINCH #2 CONTROLS

MAIN SUPPORT AND LIFTING

ARMS TUCKED

INSIDE STRAPS

ARMS TUCKED

INSIDE STRAPS

FEET UNSUPPORTED

FEET

HANGING

MONORAIL BEAM

BUTTOCKS

KNEE

FEET BEHIND HEADBACKUPPER

ANKLE

KNEE

HIPS

ELBOW

SHOULDER

NECK

In-room Transfers: • Insert bottom and back pads on patient while in bed position with simple roll over and place method

• Raise back pad to sitting position for patient comfort during move

• Safely move patient off of bed to set in wheelchair / gurney for standard transportation

• Move patient on monorail in sitting position to bathroom are and maneuver for easy toilet, or shower access and use.

• Return patient via monorail to bed position and remove the pads.


BENCHMARK

ENGINEERING

GROUP, INC.

AREATOILET

AREASHOWER

GURNEYMONORAIL PATH

WHEELCHAIR

BEDAREA

AREA

• Bottom and back pads ergonomic design and can go with the patient to the next S.P.L.I.T.S. enabled destination

• Nylon straps for easy connection and lifting

• Pads made of high density plastic for easy cleaning, durability, and sanitization

• Back pad has integrated neck support

• Bottom pad is toilet ready

Components:


BENCHMARK

ENGINEERING

GROUP, INC.


BENCHMARK

ENGINEERING

GROUP, INC.

Typical monorail

beam system

Typical powered

trolley system on

monorail beam

• Utilizes standard power

winches and powered trolleys

(120v) along ceiling mounted

monorail beam

• Winch system can raise and

support 600 to 800 pounds

• Monorail beam is simple I-

beam attached to building

structure and located just

below ceiling level

• 1 winch for bottom pad, 1 for

back pad & 1 powered trolley

Typical electric winch

with control pendent

Typical trolley to

monorail beam

manual attachment

Lifting / Moving Power:


BENCHMARK

ENGINEERING

GROUP, INC.

Other SPLITS Use Areas:

The S.P.L.I.T.S. program offers a more functional way of moving patients that reduces potential injuries yet is very flexible for health care operations.

The S.P.L.I.T.S. components are simple and basic systems that are used everyday, but when combined for patient care creates a new, better, & safer technological way of moving patients.

An entire facility can be made S.P.L.I.T.S. enabled simply and economically by adding monorail ceiling track, installing trolleys, and implementing the bottom and back pads.


BENCHMARK

ENGINEERING

GROUP, INC.

Documents

Presents Hospital Design Concepts ATIENT LLLLIFTING ...€¦ · Safe Patient Lifting In-room Transfer System (S.P.L.I.T.S.) • Roll patient and insert bottom and back pads • Attach