21
AIR CONDITIONER BY : ROBBYAH At this time on my article, I'll share a little about the components installed on an Air Conditioner, which is divided into two sections: Section Indoor Unit and Outdoor Unit Parts

Presentasi AC

Embed Size (px)

Citation preview

AIR CONDITIONER BY : ROBBYAH

At this time on my article, I'll share a little about the components installed on an Air Conditioner, which is divided into two sections: Section Indoor Unit and Outdoor Unit Parts

1. INDOOR COMPONENTS

• Indoor components consist of:a. Grille

Grille is the most important part in an indoor, because the grille is the body of indoor, which serves as a position of components that exist in the indoor.

b. Evaporator

Water Conditioner is a device made of copper that is covered with a circle of aluminum flake shaped lattice thin and functional meeting facilities, which is transform the room into the cold air as circulation assisted by the indoor blower.

c. Indoor Fan Motor

Is a Motor AC / DC that serves the indoor blower to move a certain speed in order to get the room air can circulate through the evaporator.

d. Indoor Blower

Is a round-shaped device that is called a blower that serves as a tool to throw a room air aided by the indoor fan motor.

e. PCB / Module

Micro-computer is a tool that serves to give the command a whole series of air conditioner

f. Remote Controller

Is a tool for use our desire to ac, which is connected with AC Module

f. Thermistor

Is a tool that serves as an air sensor to analyze the room was freezing cold and analyze outdoor supply.

g. Capacitor fan

Is a tool to help start the indoor fan motor

f. Air Filters

Is a tool that serves as a filter of impurities

B. OUTDOOR COMPONENTS

a. Body

Is zinc or plastic that serves as a tool to place completion of the whole series of outdoor

b. Kompressor

which is a tool that serves as a means to circulate the freon gas from indoor to outdoor

c. Condenser

is a tool to circulated freon gas from outdoor in to indoor

d. Capacitor Kompressor

Function similarly to capacitor on indoor, but have a higher tolerance than the fan capacitor

e. Outdoor Fan Motor

Is an electric motor AC / DC that serves as a means to circulate air around the outdoor that functions to maintain a certain temperature

f. Outdoor fan capacitor

Serves as a starting Outdoor Fan Motor

g. Capillary

tool that serves to process the gas into liquid causing condensation.

h. Filter Dryer

As the name implies it serves as filter impurities that may be present in the system.

i. Faucets valp

As a tool to hold Refrigerant Gas in before the ac compressor installed

j. Overload

Is an automated tool that works as a control compressor when the compressor is too hot

THANK YOU