Upload
hoangnga
View
221
Download
3
Embed Size (px)
Citation preview
Denim
PROATEX 2014 T E X T I L E M A C H I N E R Y
PHOTOS
PROATEX 2014
EXAMPLE OF FINISHING LINE FOR DENIM FABRIC
Causticizing and washing line
Overdyeing and desizing line for denim fabric
PROATEX 2014
PROATEX 2014 CONTROL
Automation process programme
• Parameters funtion control of the machine through
preecorded memorized formulas
• Graphic colour screen
• Programming parameters:
- Basic parameters of Version 1
- Squeeze provision
- Recyle
- Time of permanence
- Produc dosage
- Formula edition RT
PROATEX 2014
MAX-WASHER CONCEPT Based on the principle of passing the bath through the fabric.
Uses two types of technologies: Spray Vacuum Washer, Submerged Suction.
SPRAY VACUUM WASHER
The fabric is sprayed with clean water (hot or cold) on the
upper face. Vacuum slot is installed under the bottom face.
Sprayed water must pass through the fabric by means of
Vacuum. The high speed of the air when it passes through the
fabric increases the speed of the water which is the vehicle
used to remove contaminants from the fibers.
The fabric leaves the vacuum slot with a very low percentage
of moisture. By this way, the fabric is ready to absob the new
bath in better conditions.
SUBMERGED SUCTION
The bath is forced to pass through the fabric twice by
means of two submerged suction slots connected to a
special high performance centrifugal pump.
The maximum flow that this pump can archieve is
250.000 Lts per hour. The penetration of the bath will
vary according to the permeability of each type of fiber
(exchange). Also it varies according to the fabric weight
and production speed.
PROATEX 2014
PROATEX 2014, S.L. Avinguda Principal, 43-B Pol. Ind. Can Clapers
08181 - SENTMENAT
(Barcelona) - SPAIN
Tel.: (34) ---------
E-mail: [email protected]
http://www.proatex2014.com
WE RESERVE OURSELVES THE RIGHT OF MODIFYING THE DATA AND MODELS SHOWN IN THIS BROCHURE
PROATEX 2014 T E X T I L E M A C H I N E R Y