Premium Yacht Paint Solutions

Disclaimer: The information given in this sheet is not intended to be exhaustive. Any person using this product without first making further enquiries as to the suitability of these products for the intended purpose does so at their own risk and we can

accept no responsibility for the performance of the product or for any loss or damage (other than death or personal injury resulting from negligence) arising out of such use. The information contained in this sheet is liable to modification from time to time

in the light of experience and our policy of continuous development.

All trademarks mentioned in this publication are owned by, or licensed to, the AkzoNobel group of companies. © AkzoNobel 2016

ECoNEA™ is a trademark of Johnson & Johnson.. SKU Catalog/USA 2016

International Paint Ltd. 6001 Antoine Dr. Houston, TX USA 77091 Tel: (713) 682-1711 Technical Support Tel: 1-800-468-7589

Fax: (713) 684-1301 Email: InterluxTechnicalService@akzonobel.com

Cetol® MarineCetol Marine with Next Wave™ UV-absorbing technology is a durable

translucent protective wood finish for use above the waterline on interior

and exterior woods. Next Wave technology is a unique UV package of

advanced Ultra Violet absorbers that provide greater protection, durability

and longevity. Cetol Marine has excellent weathering properties and allows

for the natural expansion and contraction of wood which prevents Cetol

Marine from cracking. Cetol Marine is also micro-porous, allowing moisture

to escape from the wood which will prevent blistering and flaking of the

finish. Cetol Marine is an easy to apply, low maintenance alternative to

wood oils and other wood treatments.

n Cetol Marine produces an attractive dark amber appearance on wood.

n Cetol Marine Light produces a lighter amber appearance on wood.

n Cetol Marine Natural Teak has a rich golden color on wood.

n Cetol Marine Gloss provides a high-gloss, hard-wearing, UV protection

and is developed as a topcoat for Cetol Marine, Cetol Marine Light and

Cetol Marine Natural Teak.

Interlux® Wood Solutions

InterProtect® Primers with Micro-Plates®InterProtect primers with Micro-Plates can be used above and below

waterline and on all substrates. Micro-Plate® Technology creates an

overlapping barrier to help stop water migration through the coating

reducing water migration through the epoxy to the hull surface which

could lead to blistering.

Gray Y2000E White Y2002E Gray YPA423KIT

Perfection® PlusA high performance, two-part clear polyurethane, Perfection

Plus delivers the ultimate in performance longevity resistance.

The chemical cure urethane formulation combines with a best-

in-class UV and HALS package to offer outstanding chemical

and abrasion resistance and superb gloss and gloss retention

that lasts four times longer than conventional one-part varnishes.

Schooner® GoldThis product offers a higher film build per coat that allows both

professional applicator and boat owners to achieve great

results faster and in fewer coats. This ‘thicker’ varnish will

require thinning, in most conditions, to achieve optimum flow.

Schooner Gold has shown to out-perform other leading brands

and will offer superb longevity and durability.

Schooner® 96Combines the very best of classic varnish craftsmanship with

the newest technology. Schooner Varnish contains ultra-violet

filters to screen the sun's damaging rays for remarkable

durability, excellent water resistance and silky application.

Superior self-leveling property and a bright, clear, high-gloss

finish with the traditional golden color.

Compass® ClearCompass Clear is a highly durable one-part polyurethane gloss

varnish that contains a unique combination of ultra-violet

additives, HALS, surface stabilizers and antioxidants to ensure

long-term gloss and clarity. Polyurethane resin adds incredible

abrasion, chemical and water resistance. Superior leveling

properties along with silky application allows you to achieve a

professional, long lasting finish. Compass Clear is suitable for

all internal and external woods, and can be applied directly to

oily timber, such as teak.

Goldspar® Satin 60A modified polyurethane, low luster varnish designed for

application to interior wood surfaces. It produces a warm, rich

satin sheen finish that resists scratches and stains and applies

easily enough to yield truly professional results by either brush

or spray. Goldspar Satin Varnish 60 is ideal anywhere a low

luster finish is desired, such as cabin soles, cabinets, counters

and tables.

Premium Teak RestorerCleans, restores and brings back the natural color of teak and

other hardwoods. Gentle formula, does not bleach or damage

surrounding fiberglass, wood, metals and painted surfaces.

Contains Tenside cleaners, which are excellent at removing oil

and dirt.

Premium Teak OilTraditional Scandinavian formula providing ultimate protection

against the elements. Formulated with a rust inhibitors,

protecting metal from rusting. Easy to apply, fast drying, warm

golden color for exterior and interior use. Can be applied to

damp or dry wood, for best results apply to dry wood.

InterProtect 2000E

n Fast drying, easy application

n Use as part of a no sand

system

n The Industry standard for

more than 20 years

InterProtect HS

High solids two-part epoxy

n High solids for fewer coats to

achieve film build

n Protect metals from rust and

oxidation

n Reduced solvent emissions

Cetol MarineIVA300

Cetol MarineLight

IVA290

Cetol MarineNatural Teak

IVA316

Cetol MarineGloss

IVA315

Perfection®

A high-gloss, high-performance two-part polyurethane

that combines a long lasting abrasion and chemical

resistant finish with superb protection from the detrimental

effects of UV rays. Its abrasion resistance makes it ideal

for application to decks and gunwales. Perfection can

be used anywhere above the true waterline on properly

prepared fiberglass, wood, aluminum, steel and epoxy.

The superb high-gloss characteristics, long-lasting color

retention and durability makes Perfection the finest coating available.

Professional quality results are made easy with Perfection.

Snow WhiteYHB000

MediterraneanWhite YHA184

oyster WhiteYHA194

MatterhornWhite YHA198

Arctic WhiteYHS248

Pearl WhiteYHS253

PlatinumYHA183

CreamYHS070

Fighting LadyYellow YHS056

Rochelle RedYHS299

Jade MistGreen YHB663

LauderdaleBlue YHS936

Royal BlueYHA216

Mauritius BlueYHF991

Flag BlueYHK990

Jet BlackYHY999

Topside FinishesBrightside® PolyurethaneBrightside is a hard, easy to use high-gloss one-part

polyurethane topside finish. It has excellent application

characteristics that yield a “sprayed on” look when brush

applied in thin coats. Brightside is ideal for use anywhere

above the true waterline and is easy to clean, resists

staining and has great abrasion resistance. Brightside is

also available in select colors in pints

for striping and boottops.

Blue-Glo WhiteY4259

WhiteY4359*

off-WhiteY4381

Matterhorn White Y4360

Seattle GrayY4205

Steel GrayY4250

Black Y4258*

Light BlueY4351

Medium BlueY4353

Largo BlueY4100

ocean BlueY4253 (C.C. Blue)

Sapphire BlueY4241

Dark BlueY4316

Flag BlueY4990*

Sundown BuffY4237

Grand BanksBeige Y4217

Bristol BeigeY4207

Kingston GrayY4190

Hatteras off-White Y4208

Sea GreenY4247

Fire RedY4248*

YellowY4152

Hatteras off-White

(1990) Y4218

* Also available in

Brightside Boottop

& Striping Enamel

WhiteYJB000

GrayYJF684

CreamYJC089

Sand BeigeYJG009

Squall BlueYJB923

InterdeckAn excellent slip-resistant finish with a tough polyurethane

resin that protects decks against everyday wear and tear.

It contains a fine aggregate and will apply easily on all

substrates. Interdeck has a low sheen finish to reduce

sun glare from decks.

Bilgekote®

A fast drying, durable coating formulated for application

in bilge areas. Bilgekote helps prevent substrate absorp-

tion of oil, gasoline or sludge (into wood and fiberglass

surfaces). Want an easy-to-clean finish?

Try Bilgekote today!

Gray YMA100

White YMA102

off-WhiteYHA192

All trademarks mentioned are owned by, or licensed to, the AkzoNobel group of companies. © AkzoNobel 2016 .

Interlux® Antifouling Range Micron® Technology is the basis of all Micron Paints• Micron is the original controlled-polishing antifouling, offering outstanding performance longevity with an extensive track record on fuel efficiencies

• Longest lasting, multi-season protection with the ability to haul and relaunch without repainting

• Controlled polishing means that it wears away like a bar of soap reducing paint build-up

• Becomes smoother with use, reducing drag and maximizing fuel savings

Micron® 99®

Self Polishing Copolymer with Advanced Biolux SPC

Technology.

n outstanding long lasting antifouling performance

n Self Polishing Copolymer technology deliversmaximum protection even during stationary periods.

n Can be used in all water (Fresh, Brackish and Salt Water)

n For boats over 82 feet.

Blue YBC101 Navy YBC103 Black YBC106

Micron® CSCThe ‘Classic Micron’ in the Micron Family.

n Proven performance for 25 years on Power and

Sail boats in all waters

n The standard in Multi-season Polishing Copolymer -

often imitated but never duplicated!

n Haul and relaunch without repainting

n Great for trailerable boats

n Not for Use on Aluminum

Red Y5582 Black Y5583 Blue Y5580 Green Y5581Dark Blue

Y5586

Shark White

Y5584

Micron® OptimaWater-based Micron Technology delivers ultimate

antifouling performance

n Powerful Activated Biolux Technology to help block slime and algae.

n Multi-seasonal performance for tough areas

n Water-based for easy clean up and application

Micron® WAWater-based Antifouling.

n Micron Antifouling Technology: long-lasting,

multi-season, controlled polishing, and proven

performance

n Unique Water Activated Matrix Technology

n Fast drying time for year-round use

n Easy to apply and with low odor and VoC omissions

n Compatible with most antifouling paints

Red YBA953 Kit Blue YBA973 Kit Black YBA993 Kit

Micron® CFMicron CF is a Copper Free multi-season antifouling

that uses Biolux® Slime Blocking Technology and

Econea™ to ward off hard growth like barnacles

and zebra mussels.

n Suitable for all boats in all waters and all substrates

n Bright colors including Shell White

n Reduced solvent emissions - VoC compliant

n Polishing paint reduces build- up and friction and improves

fuel efficiency

Blue YBD100 Green YBD101 Red YBD102 Black YBD103 Shell White YBD104

Red YBC582 Black YBC583 Blue YBC580 Green YBC581

Micron® 66®

Award-winning, self-polishing copolymer

technology with Biolux® SPC.

n outstanding antifouling performance in the

harshest fouling conditions

n Top rated antifouling in independent tests

n Maximum protection even during stationary periods

n Not for use in fresh water or on aluminum

Red YBA472 Black YBA473 Blue YBA470 Green YBA471

Red V107UKIT Blue V106UKIT original V105UKIT

VC®17m The original thin film antifouling paint that is formulated

with fluoro microadditive to reduce friction and drag,

for optimum speed and efficiencies through the water.

Favored by professional sailing race teams & power

boaters for over 15 years, VC 17m is a hard,

super smooth, racing finish that is super easy to maintain.

Red V117 Black V118 Blue V116

VC® OffshoreFor racing sailing and performance power boats.

VC offshore will yield a hard, smooth, low friction

surface that can be burnished to a very low profile.

VC offshore is suitable for use in fresh and salt water.

Not for use on aluminum.

Baltoplate Metallic

Gray R3950

NEW!

Green YBA559

Red Y3449U Black Y3779U Blue Y3669U Green Y3559U

Fiberglass Bottomkote® AquaA great performing, waterbased, low V.O.C. formulation.

n Water-based antifouling with advanced performance

n Smooth thin build antifouling that delivers advanced

protection while reducing drag and coefficient of friction

n Use on new boats and inflatables with the Interlux Simple

No Sand System

n No strong odor and easy clean up with soap and water

n Low VoC reduces solvent emissions

n Not for use on aluminum.

Ultra-KoteLong-term antifouling protection for medium to high

fouling areas in a hard durable finish.

n Long lasting performance

n Durable finish – excellent color stability

n Low VoC – limits solvent emissions into the atmosphere

n Powerful antifouling protection

n Not for use on aluminum

Red YBA062 Black YBA063 White YBA068

Trilux® 33®

Trilux 33 offers brighter, cleaner colors, and is ideal

for use on all traditional boat substrates including

aluminum.

n Biolux® slime blocking technology reduces slime and

increases antifouling performance

Fiberglass Bottomkote® NTThe Fiberglass Bottomkote NT Advantage:

n NT (New Technology) – optimizes the benefits of hard

and ablative paints through a unique Dual Resin

Approach

n Durable Coating – Prevents premature wear-through

yet a slow polishing action minimizes unnecessary paint build-up

n Fast-Dry – So fast you can paint and launch in the same day!

n Universal – A cost effective choice for all power and sail boats

and in all waters

n Not for use on aluminum.

Red YBB349 Black YBB379 Blue YBB369 Green YBB359

Red YBA549 Black YBA579 Blue YBA569

Note: All new Sea Ray and Meridian boats are delivered with Fiber-

glass Bottomkote Aqua.

ACTBest value ablative antifouling protection.

n Season to Season Ablative Antifouling eliminates

paint build up and sanding

n Provides excellent protection in waters with moderate

to heavy fouling

n Not for use on aluminum

Red 4490U

Black7790U

Brown8890U

Blue 6690U

Green5590U

Aqua-One Performance AblativeAqua-One is a water-based ablative antifouling

that delivers strong protection for all areas.

n Powerful protection all season long

n Compatible with most antifouling paints for power

and sail boats in all waters.

n Easy application and clean-up

n Not for use on aluminum

Red YBE149 Green YBE159 Blue YBE169 Black YBE179

Pacifica® PlusCopper Free, dual biocide antifouling paint.

n Contains Biolux® Slime-Blocking technology and

Econea™ to control shell growth

n Ablative antifouling paint reduces build-up and friction

n Suitable for all substrates, including aluminum

n Reduced solvent emissions - VoC compliant

n Gray and black available in pints for brush application

to outdrives and outboards

Red YBB262 Black YBB263 Blue YBB260 Green YBB261 Gray YBB264

Gray YBA064ABlack YBA063A White YBA068A

Trilux® 33® AerosolThe best performance aerosol antifouling available,

Trilux 33 Aerosol has been formulated specifically for

aluminum outboards, outdrives and can be used on

all underwater metals. Biolux Technology is used to

control slime growth. Prime bare metal with rimocon.