2
RAMSDEN COURT, RAMSDEN ROAD, ROTHERWAS INDUSTRIAL ESTATE, HEREFORD, HEREFORDSHIRE HR2 6LR, UK (+44) 01432 365000 TEL (+44) 01432 365001 FAX An IMCI Company BIJUR DELIMON Lubrication Solutions for Ball Mills Custom designed for optimal lubrication of Girth Gears and Pinions on rotating equipment. For harduous applications that require constant, metered and direct lubrication with grease or high viscosity oils, providing increased Mill output . Spray lubrication systems extend gear and pinion life by up to 50%! The industry recognised solution for applying the required quantity of synthetic/speciality gear lubricants, with minimal over spray. Optional custom enclosures are available to provide “plug and play” installation. Optional range of spray nozzles available; heated nozzles for cold temperatures, and monitoring of the lubricant and air flow. Stand-alone design can be easily retrofitted. Programmable controller for simpler adjustability. Optional heated enclosures for protection against cold temperatures and hazardous operating conditions. Reduced vibration and noise with synthetic/speciality gear lubricants and controlled intermittent spray. For more information about this product, please contact (+44) 01432 365000 or email [email protected] PREMIUM GEAR SPRAY LUBRICATION SYSTEMS

PREMIUM GEAR SPRAY LUBRICATION SYSTEMS...• Custom designed for optimal lubrication of Girth Gears and Pinions on rotating equipment. • For harduous applications that require constant,

  • Upload
    others

  • View
    1

  • Download
    1

Embed Size (px)

Citation preview

Page 1: PREMIUM GEAR SPRAY LUBRICATION SYSTEMS...• Custom designed for optimal lubrication of Girth Gears and Pinions on rotating equipment. • For harduous applications that require constant,

RAMSDEN COURT, RAMSDEN ROAD, ROTHERWAS INDUSTRIAL ESTATE, HEREFORD, HEREFORDSHIRE HR2 6LR, UK (+44) 01432 365000 TEL (+44) 01432 365001 FAX

An IMCI Company

BIJUR DELIMON Lubrication Solutions for Ball Mills

• CustomdesignedforoptimallubricationofGirth

GearsandPinionsonrotatingequipment.

• Forharduousapplicationsthatrequireconstant,

meteredanddirectlubricationwithgreaseorhigh

viscosityoils,providingincreasedMilloutput.

• Spraylubricationsystemsextendgearandpinionlife

byupto50%!

• Theindustryrecognisedsolutionforapplyingthe

requiredquantityofsynthetic/specialitygear

lubricants,withminimaloverspray.

• Optionalcustomenclosuresareavailabletoprovide

“plugandplay”installation.

• Optionalrangeofspraynozzlesavailable;heated

nozzlesforcoldtemperatures,andmonitoringofthe

lubricantandairflow.

• Stand-alonedesigncanbeeasilyretrofitted.

• Programmablecontrollerforsimpleradjustability.

• Optionalheatedenclosuresforprotectionagainstcold

temperaturesandhazardousoperatingconditions.

• Reducedvibrationandnoisewithsynthetic/speciality

gearlubricantsandcontrolledintermittentspray.

For more information about this product, please contact (+44) 01432 365000 or email [email protected]

PREMIUM GEAR SPRAY LUBRICATION SYSTEMS

Page 2: PREMIUM GEAR SPRAY LUBRICATION SYSTEMS...• Custom designed for optimal lubrication of Girth Gears and Pinions on rotating equipment. • For harduous applications that require constant,

WWW.BIJURDELIMON.COM 1573_36982 • R0 • 01/17

OverviewBijurDelimongearspraysystemsareusedtolubricatelargegearandpinionsetssuchasthosefoundinBallMills.Eachsystemincludesanairoperatedpumpingstation,ameasuringvalvecontrolpanel,aspraynozzlelance,electricalcontrolsandotherop-tionalequipment.

Gearfacewidthsof50mmto1050mmcanbelubricatedwithnozzlesandnozzlespacingdesignedaccordingly.Becauseourgearspraysystemsoperateintermittentlytheycanbethoughtofasfilmmaintainingdevices.Theelectricalcontrolsprovidebroadcycling

PROVEN QUALITY, RELIABILITY AND ACCURACY.

FILTER &REGULATOR

AIR SOLENOID

AIRPRESSURESWITCH

MACHINEPOWER SOURCE

LUBECONTROLLER

AIR CONTROLPANEL

[AIR FILTER, OILER& REGULATOR]

120# DRUM PUMPWITH VENT RELIEFLOW LEVEL SWTICH DIVIDER BLOCK

WITH CYCLE SWITCHAND STRAINER

LUBE STATIONWITH LANCE

SD-U Nozzle with Options

Spray Lance [or Custom Made Spray Panel]

M2500G Divider with Integral Solenoid Valve, Cycle Switch, & Strainer

Barrel Pump [Electric & Pneumatic Pump Option] with Vent Relief & Low Level Switch