Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
CORONIS®
Premium diagnosticmedical display system
With many years of experience in medical imaging, Barco understands the challenges that healthcare professionals arefaced with today. When lives are on the line, only filmless perfection is acceptable. With its industry-leading CORONIS®
diagnostic display system, Barco has set the standards for diagnostic confidence, performance and image quality that lastthe entire lifetime of the display.
But there’s more. As budgets tighten, your healthcare facilitymust control the costs of delivering quality patient care. CORONIS®
has been designed to simplify this challenge through a revolutionary concept of worry-free filmless perfection. Thanks toBarco’s ever-present I-GUARD® sensor in combination with its softcopy QA management software, the DICOM quality of yourCORONIS® diagnostic display is guaranteed over its entire life cycle,without the need for human intervention. So you can focus yourattention on what really counts: state-of-the-art care for yourpatients.
CORONIS® display systems offer unprecedented diagnostic confidence and lowest cost of ownership in 1, 2, 3 and 5MegaPixel resolutions. CORONIS® combines one or more grayscaleflat panel displays with a high-speed, 10-bit display controller(1024 simultaneous shades of gray), MEDICAL softcopy QA management software, display driver and digital cabling.
Premium diagnostic medical display system
Setting the standards for diagnostic confidenceand image quality
CORONIS® benefits:
• Lowest cost of ownership thanks to Barco’s revolutionary PIN concept• Continuous DICOM-compliant imaging thanks to integrated I-GUARD® technology • Superior image quality in all environments thanks to high contrast ratio and luminance • Automated quality thanks to intervention-free QA• Full range of configurations: available as single- and multi-head systems• All-inclusive display system, including display controller, QA software, portrait/landscape accelerator, cables and driver• Ergonomic design with protective front cover• Real plug and play
Filmless perfection in 1, 2, 3 and 5 MegaPixel
Continuous DICOM compliance with integrated I-GUARD®
To ensure superior image accuracy anddiagnostic confidence, Barco's CORONIS®
display system family includes theunique I-GUARD® technology. The compact, front-mounted I-GUARD® sensorcontinually guards and adjusts the luminance output of the actual diagnostic viewing area at the front ofthe display. Barco's I-GUARD® sensor trulysees what you see, ensuring consistentimage quality and continuous DICOMaccuracy over time and across displays.
Automated quality thanks to intervention-free QA
CORONIS® comes with Barco's user-friendly MEDICAL Pro softcopy QA solution. Combined with the I-GUARD®
sensor, MEDICAL Pro provides fully automated image Quality Assurancewith no need for human intervention.MEDICAL Pro tracks, maintains and logsviewing performance, automates QAtasks, initiates display system calibration and establishes an accurateDICOM Look-Up Table calibration. Toassist with your efforts to comply withDIN 6868-57 and AAPM TG18 standards, Barco has developed user-friendly plug-ins for its MEDICAL Pro software that automate the entireprocess.
Efficient workflow with high-speedBARCOMED® CORONIS® display controller
CORONIS® display systems come withBarco’s high-speed BARCOMED® CORONIS®
digital display controller. The 10-bit display controller renders the completedata set with 1024 simultaneous levelsof gray. In addition, the dual-headBARCOMED® CORONIS® features 64-bit PCIperformance and image downloadspeeds up to 400 MB per second.BARCOMED® CORONIS® easily fits into modern workstations thanks to itssmall form factor.
Maximum protection with front glass
All CORONIS® LCD displays are equippedwith a protective diagnostic front glass,which protects the panel against damage from intensive use in clinicalrooms.
I-GUARD®
Continuous image quality, fidelity and consistency
CORONIS® 1MP - CORONIS® 2MP
CORONIS® 1MP and 2MP offer excellent image quality for a multitude of medical environments, including PACS, computed tomography, MRI and angiography. CORONIS®
1MP, Barco’s 18.1" grayscale flat panel display with 1280 x 1024 resolution, complieswith the DICOM/CIE viewing standards, which means that it features correct grayscaletracking over the total luminance range as specified in the ACR/NEMA and DIN standards.
CORONIS® 1MP and 2MP feature both digital and analog inputs. For use in legacy applications with analog signals, the flat panel displays are also available as stand-alone units. Their accurate signal conversion and high brightness make them the perfect solution to upgrade existing CRT-based systems with state-of-the-art technology. CORONIS® 1MP and 2MP can be combined with Barco’s Portrait Accelerator,which eliminates software-related application slow-downs in portrait viewing andassures full performance in portrait mode.
CORONIS® 2MP (1600 x 1200 resolution) offers softcopy performance without compromise. The system’s short response time and high on-axis contrast ratio makeit ideally suited to display moving images. Barco’s CORONIS® 2MP display system features IPS (In Plane Switching). This technology provides enhanced viewing anglecharacteristics, making it easier for an additional radiologist to aid in the diagnosisfrom a different viewing position.
CORONIS® 3MP
CORONIS® 3MP features a 20.8" grayscale flat panel with a resolutionof 1536 x 2048 for perfect image representation. With a contrast ratioof 600:1 and high luminance, CORONIS® 3MP offers medical professionals a highly accurate solution for a host of medical imaging applications including PACS, computed tomography, MRI,angiography and chest radiology. The 3MP display system can beused both in dark reading rooms as well as in ambient light environments. The integrated CORONIS® Portrait Accelerator assures fullperformance in portrait mode.
It is Barco's belief that a medical display system should provide 100% ofits 'as-new' performance during itsentire lifetime. That is why CORONIS®
3MP is available with DURALIGHT®, a revolutionary backlight technology.Compared to conventional ColdCathode Fluorescent Lamps (CCFL), theaverage lifetime of DURALIGHT®
backlights is prolonged by a factor of 3to 5, without increasing power consumption. This means that there isno need to replace the backlight duringthe life span of the medical display,which substantially reduces the system’s cost of ownership. Barco’sunique DURALIGHT® backlights are available in BlueBase and ClearBaseviewing modes and come with a 5 yearwarranty.
Lifelong reading comfort thanks to DURALIGHT®
Average backlight lifetime
Lum
inan
ce (
%)
Runtime (hours)
Conventional CCFL DURALIGHT®
10095908580757065605550
30000 100000
CORONIS® 5MP
Barco’s CORONIS® 5MP display station hasbeen engineered for very demandingmedical imaging applications. The high-grade 5MP system offers unsurpassedfilm-like images with ultra-high resolution (2048 x 2560), high luminance and high contrast ratio.Furthermore, the 21.3" LCD providesunprecedented image quality withoutpixelization, a wide viewing angle andperfect geometry. The integratedCORONIS® Portrait Accelerator assures fullperformance in portrait mode.
Barco’s state-of-the-art 5MP displaysystem ensures low life cycle cost,user-friendliness and increased productivity. Its high resolution reducesthe need for panning and roaming.
Available in BlueBase and ClearBase viewing modes
Barco’s CORONIS® 5MP display system is available in BlueBase and ClearBase viewingmodes, allowing radiologists to work in their preferred color temperature. Both colormode options provide filmless perfection for accurate softcopy imaging.
CORONIS® display systems are fully compatible with Barco’s revolutionary PIN(Product INtelligence) concept, which ensures worry-free diagnostic reading andimage distribution. Barco’s PIN-compatible PACS products form a distributed network of web-enabled, intelligent devices. The integrated I-GUARD® sensor constantly monitors image quality and DICOM-compliance. The collected data istransparently processed and logged with Barco’s MEDICAL software. Automaticallygenerated reports, as requested by the latest medical QA guidelines (DIN, AAPM),provide you with the documentation you need in assessing your QA processes,without interrupting your workflow. The surrounding network of invisible, intelligent devices keeps you informed about the display system’s consistent quality. Not only does PIN guarantee the lowest cost of ownership, it also assuresthat you can do your work quickly, accurately and with ultimate diagnostic confidence.
PIN in a nutshell:
• Constantly maintains diagnostic reading quality for worry-free filmless imaging
• Monitors diagnostic tolerances and maintains quality at predefined levels
• Keeps administrators up-to-date of system status and logs data inreal-time
• Allows for intervention-free adjustments from a remote location, even during daily radiology practice
• Drastically reduces life cycle cost (up to 80% for digital display systems)
Lowest cost of ownership thanks to PIN
Product intelligence for worry-free filmless perfection
MO
NIT
OR
DIA
GN
OSTI
C Q
UA
LITY
MA
INTA
IN D
IAG
NO
STI
C Q
UA
LITY
ESTA
BLI
SH
DIA
GN
OSTI
C Q
UA
LITY
CORONIS® 1MP CORONIS® 2MP CORONIS® 3MP CORONIS® 5MP
I-GUARD® I-GUARD® I-GUARD® I-GUARD®
IMAGE
VERIFICATION
IMAGE
VERIFICATION
IMAGE
VERIFICATION
IMAGE
VERIFICATION
SIGNATURE
VERIFICATION
SIGNATURE
VERIFICATION
SIGNATURE
VERIFICATION
SIGNATURE
VERIFICATION
MEDICAL ADMINISTRATOR
NOTIFICATION
EMAIL CELL PHONE
PDA
SA-SFT AMLCDGrayscale, 3 subpixels per pixel
1600 x 1200 / 1200 x 1600
0.270 mm
540 mm (21.3")
432 x 324 mm ( 17 x 12.76")
170° (at 10:1 contrast)
700:1 typical
500 cd/m2 (145.9 fL) calibrated, 900 cd/m2 (262.7 fL) max.Embedded I-GUARD®
DVI (complying to VESA DVI)
Not applicable
DDC (complying to DDC2Bi standard), EDID
One physical DVI connector, one cable
USB-hub with 1 up- and 2 downstream ports
1600 x 1200 (Landscape)1200 x 1600 (Portrait, features PortraitAccelerator) VGA boot
90 to 264 VAC, 45 to 65Hz, 66W max.
Supports DPMS0°C to +40°C (32°F to 104°F)
+15°C to +35°C (59°F to 95°F)CE, UL60950, CSA C22.2 No 60950 (c-UL), CB,IEC 60950, DEMKO EN 60950
EN 55022, EN 50082-1, FDA 510 k
P: 385 x 585 x 250 mm (15.2 x 23.0 x 9.8”)
14 kg ( 30.8 lbs.)
Tilt & swivel base with P/L rotation 100mm VESA mounting standardAR coated front cover
Display on/off, backlight adjustment, OSD
MFGD 2621 (2MP)
Technology
Native resolution
Pixel pitch
Active screen diagonal
Active screen area
Viewing angle (Hor./Vert.)
Dark room contrast
Luminance (typical)
Stabilization, calibration and automated QA
Digital video input
Analog video input
Display control and communication
Digital video / DDC input connector
USB
Supported resolutions
Input
Power saveOperating temperature range
Within specificationsSafety
Emission
Dimensions (WxHxD)
Weight
Ergonomics
Display controls
TFT AMLCD Dual Domain IPSGrayscale, 3 subpixels per pixel
1280 x 1024 / 1024 x 1280
0.2805 mm
459.7 mm (18.1")
359 x 287 mm (14.1 x 11.3")
170° (at 10:1 contrast)
600:1 typical
400 cd/m2 (116.7 fL) calibrated, 600 cd/m2 (175.1 fL) max.Embedded I-GUARD®
DVI (complying to VESA DVI)
VGA D-SUB15 connector, BNC
DDC (complying to DDC2Bi standard), EDID
One physical DVI connector, one cable
USB-hub with 1 up- and 2 downstream ports
1280 x 1024 (Landscape)1024 x 1280 (Portrait, optional PortraitAccelerator) VGA boot
90 to 264 VAC, 45 to 65Hz, 64W max.
Supports DPMS0°C to +40°C (32°F to 104°F)
+15°C to +35°C (59°F to 95°F)CE, UL60950, CSA C22.2 No 60950 (c-UL), CB,IEC 60950, DEMKO EN 60950
EN 55022, EN 50082-1, FDA 510 k
L: 433 x 525 x 250 mm (17.0 x 20.7 x 9.8”)
11.8 kg (26 lbs.)
Tilt & swivel base with P/L rotation 100mm VESA mounting standardAR coated front cover
Display on/off, backlight adjustment, OSD
TFT AMLCD VA Mode LCDGrayscale, 3 subpixels per pixel
1600 x 1200 / 1200 x 1600
0.255 mm
510 mm (20.1")
408 x 306 mm (16.1 x 12")
170° (at 10:1 contrast)
1000:1 typical
400 cd/m2 (116.7 fL) calibrated, 600 cd/m2 (175.1 fL) max.Embedded I-GUARD®
DVI (complying to VESA DVI)
VGA D-SUB15 connector, BNC
DDC (complying to DDC2Bi standard), EDID
One physical DVI connector, one cable
USB-hub with 1 up- and 2 downstream ports
1600 x 1200 (Landscape)1200 x 1600 (Portrait, optional PortraitAccelerator) VGA boot
90 to 264 VAC, 45 to 65Hz, 70W max.
Supports DPMS0°C to +40°C (32°F to 104°F)
+15°C to +35°C (59°F to 95°F)CE, UL60950, CSA C22.2 No 60950 (c-UL), CB,IEC 60950, DEMKO EN 60950
EN 55022, EN 50082-1, FDA 510 k
P: 385 x 585 x 250 mm (15.2 x 23.0 x 9.8”)
13.9 kg (30.6 lbs.)
Tilt & swivel base with P/L rotation 100mm VESA mounting standardAR coated front cover
Display on/off, backlight adjustment, OSD
VISUAL CHARACTERISTICS
MFGD 2320* (2MP)
CONNECTIVITY
POWER REQUIREMENTS
ENVIRONMENTAL
APPROVALS
PHYSICAL CHARACTERISTICS
MFGD 1318* (1MP)LCD PANEL
* = Available as stand-alone unit
Technical specifications CORONIS® displays
Bus
Bus clock speed
Bus width
Power consumption
Form factor
Operating system
Platforms
Display configuration
Graphics processor
Display memory
VGA
Pixel clock rate
Pixel clock rate for CORONIS® 5MP
Look-Up-Table
Electrical standard
Supported resolutions/refresh rates
Supported resolutions/refresh rates for CORONIS® 5MP
Connectors
Operational
Storage
Operational
Storage
EMI
TFT AMLCD Dual Domain IPSGrayscale, 3 subpixels per pixel
2048 x 1536 / 1536 x 2048
0.207 mm
528 mm (20.8")
423.9 x 318 mm (9.8 x 12.5")
170° (at 10:1 contrast)
900:1 typical
500 cd/m2 (145.9 fL) calibrated, 700 cd/m2 (204 fL) max.Embedded I-GUARD®
Dual DVI (complying to VESA DVI)
Not applicable
DDC (complying to DDC2Bi standard), EDID
One physical DVI connector, one cable
USB-hub with 1 up- and 2 downstream ports
2048 x 1536 (Landscape)1536 x 2048 (Portrait, features PortraitAccelerator) VGA boot (1 to 1 pixel mapping)
90 to 264 VAC, 47 to 65Hz, 79W max.
Supports DPMS0°C to +40°C (32°F to 104°F)
+15°C to +35°C (59°F to 95°F)CE, UL60950, CSA C22.2 No 60950 (c-UL), CB,IEC 60950, DEMKO EN 60950
EN 55022, EN 50082-1, FDA 510 k
P: 385 x 585 x 250 mm (15.2 x 23.0 x 9.8”)
13 kg (28.66 lbs.)
Tilt & swivel base with P/L rotation 100mm VESA mounting standardAR coated front cover
Display on/off, backlight adjustment, OSD
TFT AMLCD Dual Domain IPSGrayscale, 3 subpixels per pixel
2560 x 2048 / 2048 x 2560
0.165 mm
540.9 mm (21.3")
422.4 x 337.9 mm (16.6 x 13.3")
170° (at 10:1 contrast)
600:1 typical
500 cd/m2 (145.9 fL) calibrated, 700 cd/m2 (204 fL) max.Embedded I-GUARD®
Dual DVI (complying to VESA DVI)
Not applicable
DDC (complying to DDC2Bi standard), EDID
One physical DVI connector, one cable
USB-hub with 1 up- and 2 downstream ports
2560 x 2048 (Landscape)2048 x 2560 (Portrait, features PortraitAccelerator) VGA boot (1 to 1 pixel mapping)
90 to 264 VAC, 45 to 65Hz, 72W max.
Supports DPMS0°C to +40°C (32°F to 104°F)
+15°C to +35°C (59°F to 95°F)CE, UL60950, CSA C22.2 No 60950 (c-UL), CB,IEC 60950, DEMKO EN 60950
EN 55022, EN 50082-1, FDA 510 k
P: 408 x 592 x 217 mm (16.1 x 23.3 x 8.5”)
13.5 kg (29.7 lbs.)
Tilt & swivel base with P/L rotation 100mm VESA mounting standardAR coated front cover
Display on/off, backlight adjustment, OSD
MFGD 5421 (5MP)MFGD 3420 (3MP)
PCI 2.2, universal signaling
66 MHz
64 bit
< 15 Watt
106 x 176 x 16 mm (4.2 x 6.9 x 0.6”)
Microsoft Windows NT, 2000, XP
Pentium class and up
Single- or dual-head, portrait or landscape
Proprietary AURA technology
64 MB
Integrated VGA controllerAlso compatible with external VGA cards
up to 200 MHz
278 Mhz
10 bits in/10 bits out
Dual DVI complying to VESA DVI Rev. 1.0
1280 x 1024 @ 60 Hz1024 x 1280 @ 60 Hz1600 x 1200 @ 60 Hz1200 x 1600 @ 60 Hz2048 x 1536 @ 60 Hz1536 x 2048 @ 60 Hz
2560 x 2048 @ 50 Hz2048 x 2560 @ 50 Hz
Two DVI connectors (one per head)
+10°C to +60°C (50°F to 140°F)
-40°C to +85°C (-40°F to 185°F)
80%
100%
FCC class B, CE, EN 55022 B, EN 61000-6, IEC 60601-1-2
CHARACTERISTICS
VIDEO OUTPUT
TEMPERATURE
HUMIDITY
EMI
BARCOMED® CORONIS®
SYSTEM REQUIREMENTS
Technical specifications are subject to change without prior notice
Technical specifications BARCOMED® CORONIS®
LCD PANEL
VISUAL CHARACTERISTICS
CONNECTIVITY
POWER REQUIREMENTS
ENVIRONMENTAL
APPROVALS
PHYSICAL CHARACTERISTICS
BarcoView (Belgium)Pres. Kennedypark 35 - B-8500 Kortrijk,
BelgiumPhone: +32 56 233 244
Fax: +32 56 233 374 E-mail: [email protected]
BarcoView, LLC (USA)3059 Premiere Parkway - Duluth,
Georgia, 30097-4905, USAPhone: +1 678 475 8000
Fax: +1 678 475 8100 E-mail: [email protected]
Barco LTD. (Taiwan)17th floor, Kuohwa Building
868-6, Chungcheng Road,Chungho City, Taipei County, 235, Taiwan
Phone: +886 2 8221 6868Fax: +886 2 8221 6969
Barco Systems Pty. Ltd. (Australia)2 Rocklea Drive, Port Melbourne, Vic,
3207, AustraliaPhone: +61 3 9646 5833
Fax: +61 3 9646 5887
Barco Ltd. (South Korea) 3F, Dansan-Nonhyun Building, 216-8
Nonhyun-dongKangnam-ku, Seoul 135-010, South Korea
Phone: +82 2 3445 8900Fax: +82 2 3445 8737
Barco nv, Representative Office Shanghai(China)
7F, Fen Yang Road 138Shanghai PRC 200120, China
Phone: +86 21 5465 5501Fax: +86 21 5465 5502
Ref. MIS 04-012 - Nov ‘04Technical specifications are subject to change without prior notice
www.barcomedical.com
Barco medicalimaging systems
Barco has established a solid reputationin the medical imaging market by providing high-performance visualizationtechnology for X-ray, digital radiography,digital mammography, ultrasound,magnetic resonance, computed tomography, PACS and 3D imagingapplications. Its full line of color andgrayscale displays, display controllers,radiology display systems, medicalgrade projectors, QA tools and VOXAR®
medical imaging software facilitatesconfident diagnoses and overcomes thetraditional constraints of conventional2D and 3D workstations.
Barco's expertise is supported by aworldwide network of research, development and support services. Aglobal sales organization and regionalsupport people, who understand yourlanguage and requirements, complementBarco’s partnership approach.