Embed Size (px)
DESCRIPTION
Glass Ceramic manufactured from 100% recycled glass
Citation preview
J’C
SL-7
685/
03-0
9
telwebemail
020 7700 [email protected]
Lamb Works, North Road, Islington, London N7 9DP
DecoranGLASS CERAMIC
DecoranGLASS CERAMIC
Environmentally Friendly •100% Sustainable •100% Recycled Material
Decoran is manufactured from float glass and glass bottle waste in Bio-Gas fired ovens. Decoran is a glass ceramic sotherefore has a high degree of hardness, is scratch resistant, colourfast, translucent and resistant to temperatures between -50 and 200 degreess Celcius.
Decoran can be processed as either it were glass or granite, so can be used for table tops, vanity tops, kitchen surfacesand cladding.
Two surface finishes are available, Polished and Hammered and in eight standard colours. With the inclusion of inorganicpigmentation in the manufacturing process almost any colour is available (dependant on quantity required). Decoran is alsofrost proof and UV resistant.
See the following pages to give you an idea what can be achieved with Decoran.
J’C
SL-7
685/
03-0
9
telwebemail
020 7700 [email protected]
DecoranGLASS CERAMIC
Jade polished glass ceramic
Clear jade rear side polished offers maximum transparency
J’C
SL-7
685/
03-0
9
telwebemail
020 7700 [email protected]
DecoranGLASS CERAMIC
Jade hammered offers translucency
Jade hammered
J’C
SL-7
685/
03-0
9
telwebemail
020 7700 [email protected]
DecoranGLASS CERAMIC
Anthracite polished but paque glass ceramic
LED lit vanity unit
telwebemail
020 7700 [email protected]
DecoranGLASS CERAMIC
J’C
SL-7
685/
03-0
9
Utility sink unit Anthracite polished
J’C
SL-7
685/
03-0
9
telwebemail
020 7700 [email protected]
DecoranGLASS CERAMIC
A full sheet of jade hammered
Clear jade transparent
DIN EN 99< 0.1 [Ma.-%]Water absorption
0.7 [J/g K]Specific heat capacity Cp
1.04 [W/m K] at 20mm thicknessHeat conductivity at 64ºC
DIN EN 1037.22 [10 -6/K]Heat expansion 20-100ºC
DIN EN 1015 guaranteed (7 achieved)5-6 [GPa]
HardnessAccording to MohsAccording to Vickers HV
Approx. 57 [kN/mm ] average valueElasticity module
Approx. 3.2 [KN] {average value}Tearing strength attachment point{anchors attached to the rear from the firm ofKeil, placement depth 13 mm}
DIN 52112Approx. 28 [MPa]or[N/mm]Approx. 22 [MPa] or[N/mm]
Bending strengthCharacter istic value5% fractile
Approx. 48.00 [kg]Weight per mwith 20mm thickness
Approx. 2.4 [g/cm ]Specific gravity
±1,20 [mm]±1,00 [mm] high polish±1.20 [mm] hammered finish
Dimensional tolerancesDimensionsThickness
1200 x 900 [mm], thickness 20 [mm]2780 x 1260 [mm], thickness 20 mm]
DimensionsStandard panel sizeMaximum panel size
DINValues/parametersTechnical data
Closed sur face, therefore easy removal of graffiti, cleaning with alltraditional cleaning agents and solvents
Surface properties
High polish or hammered finishSurface area
DIN 51130R 9 { with hammered-finished sur face}Slip resistance
DIN EN 154Class II, 300 revolutionsSurface wear
DIN 4102Class AFire class
DIN EN 122Class ACaustic resistance
DIN EN 122Class AAAcid resistance
DIN EN 122Class AAChemical resistance
DIN EN 122Class 1Stain resistance
DIN EN 202No tr ials with visible defectsFrost resistance
J’C
SL-7
685/
03-0
9
telwebemail
020 7700 [email protected]
DecoranGLASS CERAMIC
