Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Predictable performance - increased savings
DFT
(mic
rons
)
(months)
Premium self-polishing antifouling
Sigma SylAdvance 800 is the hydrolyzing antifouling that is tailored for the future. With its silyl-acrylate binder it is self-polishing, self-smoothing and gives impeccable results on deep sea and coastal vessels. Sigma SylAdvance 800 can be specified for both Newbuildings and Maintenance & Repair.
Having a highly predictable, linear polishing rate in combination with a self-smoothing capability, Sigma SylAdvance 800 reduces both the leached layer and the average hull roughness. In turn this leads to significant emission reductions and consistent fuel savings.
Polishing rate of Sigma SylAdvance 800
0 12 24 36 48 60
PPG Protective and Marine
Coatings is dedicated to the
development, manufacture and
supply of coatings to meet the
very challenging needs of specific
industries. With a heritage of
outstanding expertise in coatings
technology and decades of international
investments in research and development
for the marine coatings market, no
company could be better placed than
PPG Protective and Marine Coatings
to meet the fast-changing global
challenges of this technically
demanding sector.
Sigma SylAdvance 800
From lab work to full ship applications ...
Sigma SylAdvance 800 has proven its excellence through rigorous testing and has delivered on its promise in full scale applications.
Block resistance Full scale measurement simulation simulation application
Polishing ratemeasurement
Fender resistancesimulation
Block resistancesimulation
Raft testing
Test patch application
Full scaleapplication
With an unusually high solid content of 54% (VOC lower than 400 g/liter) Sigma SylAdvance 800 is fully compliant with the IMO Antifouling Convention (AFS/CONF/26). Its biocides have been carefully chosen for their quick degradability and reduced environmental impact. By using state of the art technologies PPG further emphasizes the ‘green initiative’; Sigma SylAdvance 800 needs less coats and lower film thickness to perform equally or better than the comparable products in the market.
Sigma SylAdvance 800 lets you ...
Environmental benefits
High solids content 54%
Reduced number of coats from 3 to 2
Constantly reduced hull roughness
Fuel savings up to 3%
Decreased solvents emissions
Reduced carbon dioxide emissions
Minimize your environmental footprint
Key technical points of Sigma SylAdvance 800
Volume solids : 54%
VOC : 398 g/L
Dft range : 75 – 165 µ
Theor. spread rate : 3,3 sqm/L at 165 µ dft
Min. overcoating time : 6 hrs at 20 ºC
Min. time to refloat : 12 hrs at 20 ºC
Sigma SylAdvance 800 lets you ...
In a competitive environment, optimized productivity and fuel savings are of vital importance. Sigma SylAdvance 800 offers a complete benefit package that guarantees significant cost reductions.
2 coats of Sigma SylAdvance 800 buys:l A 60 month protection of the hulll Drastically reduced application timel Reduced paint usagel All-around cost reduction and maximum operational flexibilityl Highest flexibility of trading routesl Full coverage of vessel’s operational rate
On top of this, the predictable polishing rate allows for a tailor made solution to each vessel’s profile and sailing pattern.
Moreover the unrivalled smoothness achieved by Sigma SylAdvance 800 gives: l Constant fuel reduction of 3%.
Minimize your environmental footprint
Save time, save fuel - save costs
Sigma SylAdvance 800, with its self-smoothing action and outstanding fouling protection, reduces the frictional drag of the vessel resulting in unrivalled fuel savings.
Results from numerous full vessel applications prove that, on a well prepared surface, savings of 3% can be achieved.
Sigma SylAdvance 800
Fuel savings achieved!
Common assumptions: Voyage Factor 80% => 292 days/year; Fuel savings 3%
The final savings percentage achieved is subject to the average speed and operational activity of the vessel. For tailored cost savings specifications please contact your local Sigma Coatings sales representative.
Vessel type Daily bunker consumption (t) Bunker cost (USD/t)
Yearly fuel savings (k USD)
Aframax Oil Tanker 40 200 300 400 500
70 105 140 175
Panamax Bulk Carrier 33 200 300 400 500
58 87 116 145
Container 2700 TEU 90 200 300 400 500
158 237 316 395
l Fuel savings up to 3%
l Can be specified up to 60 months with only two coats
l Can be applied up to 165 mic DFT in one coat
l Highest solid content of all premium antifoulings
l Shortest refloating time on the market
l Silyl-acrylate hydrolizing tin free antifouling
l Self-polishing and self-smoothing, reducing hull roughness
l Predictable performance with lower DFT
l Suitable for all speed above 10 kn
l Suitable for application in Newbuildings as well as M&R drydockings
l Better mechanical properties due to reduced DFT
l Quick to recoat (6hrs at 20 ºC)
l Easily recoatable at the next drydock thanks to the very thin leached layer
l Compatible with most existing antifoulings
l Fully IMO AFS Convention compliant
The Sigma SylAdvance 800
key featuresFuel savings achieved!
PPG Protective and Marine Coatings
PPG Protective and Marine Coatings brings unrivalled levels of experience and expertise in coatings technology through our expanding global supply and distributors network.
We understand our customers’ needs and the challenges they face. We respond quickly with effective economic solutions, working closely with our customers to develop products that meet their requirements.
Formulations that can be applied more easily, resist the elements better and reduce overall environmental impact in compliance with both local and international standards
With in-depth knowledge of the day-to-day reality that faces the industries we supply, our technical service representatives offer an unsurpassed perspective and optimal coatings solutions; maximizing technical performance and minimizing expensive downtime.
No rights can be derived from the content of this publication. Unless otherw
ise agreed upon in writing, all products and technical
advice given are subject to our standard conditions of sale (ww
w.sigmacoatings.com
).
PPG Protective & Marine CoatingsP.O. Box 58034, 1040 HA Amsterdam, The NetherlandsTel: +31 (0)20 407 5050, Fax: +31 (0)20 407 5059Email: [email protected]: www.sigmacoatings.com/marine
00962803/01-09