Upload
julia-oconnor
View
213
Download
0
Embed Size (px)
Citation preview
Predict Remote Drill Rig
•Easy to handle
•Light weight
•Cost effective
Predict Support Systems Pty
Workshop
No 10 Boch str
Rustenburg
Tel : 014 596 5304
Fax: 014 596 6097 & 086 502 7683
E mail : p
Predict rig - Height Specifications
Rig size Clamping ext range
Min stoping width
Max stoping width
750mm 1.250m 800 1.250m
1m 1.90m 1.20m 1.90m
1.3m 2.50m 1.50m 2.50m
1.7m 3.30m 2.0m 3.30m
2.2m 4.30m 2.10m 4.30m
Predict rig - Weight Specifications
Rig size Mass excl drill incl control kg
Typical mass incl std drill kg
Mass of controls
750mm 39 kg 62 kg 6.5 kg
1m 42 kg 65 kg 6.5 kg
1.3m 49 kg 72 kg 6.5 kg
1.7m 52 kg 75 kg 6.5 kg
2.20m 58 kg 81 kg 6.5 kg
Predict rig – specifications
Rig size Drill move Wheels Safety sling Collaring device
Drill type Lifting Cylinder force at 400kpa
Clamping cylinder force at 400kpa
750mm Yes 8inch 1m - 2m Optional Any 178kg or 125kg
125 kg
1m Yes 8inch 1m - 2m Optional Any 178kg or 125kg
125kg
1.3 Yes 8 inch / 10 inch
1m -2m Optional Any 178kg or 125kg
125kg
1.7 Yes 10 inch 1m - 2m Optional Any 178kg or 125kg
125kg
2.2 Yes 10 inch 1m - 3m optional Any 178kg or 125kg
125kg
Predict Rig Safety Aspects
• Built-in drill rig jack • Remote drilling operation as far as 5 m away• No vibration of machine on operator• Operator’s remote controls under supported
roof• Light weight – easy to move around
Predict Drill Rigs – “the solution”
• One man operation• Accurate drilling due to proper clamping of machine• Can use any drill type i.e.: Board range or Compair• Light weight• Easy to handle with wheels on unit• Reliable unit• Cost effective• Low repair cost• Same rig can be used in areas from 900mm higher
than the rig size, no larger rigs necessary
Training
• Technical demonstrators to be involved during the roll faze.
• Experienced sales team will oversee the roll out process.
• Instructor will made available.
Current users of Predict Rigs
• Anglo Platinum RPM – Paardekraal, Townlands and Union Mine
• Xstrata Platinum and Chrome
• International Ferro Metals
• Lonmin – Saffy, Hossy and Newman Shafts
• Aquarius Kroondal Platinum
• RPM Union Section
• New Trial : Impala Platinum
Repair and Maintenance
• We have a workshop situated in Rustenburg.• Rigs can be collected daily to be repaired• Turn around time is 3 working days maximum after official
purchase order is received• Repair cost to be kept to a minimum – depending on the
severity of any structural damage• Repairs done on following bases :
– strip and quote basis– fixed repair cost.
• Technical demonstrators to assist with training .• Service exchange rigs available for emergency breakdowns