Consistently setting the industry standard for quality cabinet doors

PRECISION / QUALITY /SERVICE

Naturally

October 2011

Naturally

Door Designs

4

Tongue & groove joint / flat panel

1

33

BalmoralB

83mm

2831

AJBancroft

83mm

27 Belmont33

A

57mm

Concord31

T

76mm

23

32 AFCrawford

70mm33

E

83mm

Edinburgh32 C

57mm

18Laurentian

32 F

70mm

Lexington

33

LincolnD

57mm33 U

57mm

Phoenix Prairie33 AT

57mm

1933

AWindsor

57mm

Your design options are given greater variety by the selection of doors we can offer. You can have confidence that best-built

doors by MapleCraft will back up your reputation.

5

Tongue & groove joint / raised panel

2

11 AR

76mm

5Ashton 1”

57D

83mm

29

Burgoyne Imperial02

A

57mm

15 92 SW

89mm

5

Lake�eld

Newton12

A

57mm

12

Princeton07

A

57mm

25Royal

02A

57mm

15

Traditional12 A

57mm

12

20H

57mm

13Trenton

02 A

57mm

15Valencia

52E

Viceroy

76mm

36 NZ

90mm

34Wyndham

Revised: 2012/10/12 10:09

related stresses.

6

Mitred joint / Flat Panel

3

Aurora33 BV

73mm

Belair33 BU

84mm

Bridgeport33 H M1

57mm

Candida33 CM

74mm

Classic33 J

73mm

Hanover33 Q

73mm

Harington33 L

76mm

28Kensington

33 K73mm

Prestwick33 R

70mm

Selkirk33 HV

72mm

Stratford33 M2

70mm

Virginia33 AQ

64mm

The warmth of wood in your project is backed by our superior construction standards. We can provide an extensive

selection of wood species to enhance the look of your project.

Mitred joint / Raised Panel

Specialty Doors

Olive Ash Burl PanelCaning Panel Special Cut Veneer Regina

4

20V

70mm

Brunswick 24BV

Buena Vista

73mm

20 CambridgeJ

73mm

92CM

Churchill

74mm

07

Q

Dorset

73mm

49L

76mm

28Hampton26

KingstonK

73mm

78

BU84mm

Malibu

5

Applied Moulding

96 12 D

Moulding on top and bottom only

Camden

70mm33

3

70mm

Grantham

Savannah95 5

76mm

47Sherbrooke

1HN

64mm

20

Siena52 1

B

89mm

3315

M157mm

CatalinaD

AE33

#8 rope

J73mm

Jackson

332

Richmond

70mm

19D 33

Salisbury

70mm

RM

#8 rope

D

Sheridan07 10 rope

70mmMN

Stamford 1/4"

33 12

70mm

D

Vienna07 9 rope

64mmMA

Door Construction Standards**Note: Soft Maple specie available in Paint grade only. Doors higher than 122 cm (48”) or wider than 61 cm (24”) are made with a cross-rail for warranty purposes. If requested without cross-rail, warranty will not apply.

REGULAR “A” GRADE (MapleCraft’s hallmark quality grade)• This product is designed to allow a broader range of colours and a broader range of natural wood characteristics• This grade is recommended for medium colour finishes• There will be a more noticeable colour variation in the panel match than what will be seen in our select grade• More colour variation will be allowed between panel and framing than “AA”• Noticeable curly or flame grain will be allowed on the face of this product• Wood character marks on face will be small in size (< 15 mm length) and quantity (not more than 3 per .9 sq. m) Defects

such as cracks or shake in wood are not permitted unless they can be repaired in a way that does not detract from the overall appearance of the product

• Water stain will be permitted if it is very light and blends well with the overall appearance

SELECT “AA” GRADE (MapleCraft’s highest quality grade; includes 15% select charge)• This product is designed to give minimal variations in colours and minimal amounts of natural wood characteristics• Select grade is recommended for clear or light colour finishes• The panel laminations will be selected so that the colour match does not distract from the overall appearance • The colour match between the panel and the framing may vary slightly• Curly or flame graining will be permitted on the face if it is not more than slightly noticeable and colour variation is

minimal; this will be permitted on the back of the panel and not limited by amount nor colour• Wood character marks (mineral, gum, sap, knots, non-uniform grain) will be strictly controlled in size and quantity so

they blend well within the product• Water stain will not appear on the face

General Specifications for Wood Doors • Machining of all parts: +/- 0.5 mm tolerance• Cracking - not allowed• Chipping - no noticeable chipping on visible surfaces• Dents – not allowed• Laminations in centre panel - 38 mm (1.5”) – 102 mm (4”) in width with smaller strips kept to the outside• Putty repair – areas no greater than 2 mm in width and 5 mm in length will be allowed

Conditions Insect /disease damage Minimal allowed AllowedGrain swirls, spikes, rays Minimal allowed AllowedMineral streaks(Maple, Oak) None allowed Up to 5 cm (2”)Mineral streaks (Cherry) Some light (6 mm X 26 mm max.) Allowed (7 cm max.)Knots Some pin knots (1 mm) Allowed (2 mm max.)Sap None allowed AllowedRot None allowed Very minor allowedVeneer joints Tight Minor open sectionsVeneer feathering None allowed Some minor allowedVeneer grade “A” or “AA” “A” or “B”

TolerancesWarp 1 mm (1/16”) allowed on rails or stiles measuring 45.7 cm (18”) 2mm (3/32”) allowed on rails or stiles measuring 46 cm – 102 cm 3mm (1/8”) allowed on rails or stiles measuring longer than 102 cmTwist Twist on doors measuring 56 cm X 122 cm (22” X 44”) or equivalent will not exceed 3 mm

(1/8”) – doors exceeding that measurement will not have twist exceeding 4mm (3/16”)

Front Back

PAINT GRADE• Paint grade specified products are manufactured in Soft Maple as standard• This material is unselected for colour. Recommended for opaque finishes only

6

We will provide best quality products built to your satisfaction backed by a two year warranty against material defect and faulty workmanship according to the standards of construction requested by the customer.

Our Commitment

PRECISION / QUALITY / SERVICE

N449 Eastchester Avenue, St. Catharines, Ontario L2M 6S2Telephone: 905-688-5781 Fax: 905-688-1731

E-mail: info@maplecraftdoors.com Web: www.maplecraftdoors.com

Other Products Available: * Curved Mullions * Hood Facads * Dove Tail Drawer Boxes * Curved Valances * and more.......