SKU 48111Ideal for those with lathes up to 12”/300mm swing. Takes all the accessory jaws, although only those designed for smaller work are recommended for use on the Precision Midi. Available in a dedicated thread version.

SKU 48202, 48232Ideal for those with lathes up to 14”/360mm swing. Provides high geared chuck power for smaller lathes. Takes all the accessory jaws, although only those designed for smaller work are recommended for use on the G3. Available in insert and direct threaded versions.

SKU 23055Ideal for those with lathes up to 20”/508mm swing. Brilliant all-round greaed chuck for majority of users. Takes all the accessory jaws. Available in both insert and direct threaded versions.

SKU 8012All NOVA Infinity Chucks can access your existing conventional NOVA Accessory Jaws with the simple addition of the NOVA Infinity Retro Fit Kit (SKU 8200 - additional purchase) Upgrade your current older NOVA chuck to Infinity Quick Change technology with the Upgrade Jaw Slide Kit (8100 - additional purchase)

SKU 13055Ideal for those with lathes with 24”/609mm swing and larger. Takes all accessory jaws, but also has one extra special PowerGrip jaws dedicated only to the Titan.

PRECISION MIDI

GENERAL CHUCK ACCESSORIES

NOVA ACCESSORY JAWS

NOVA G3SuperNOVA2 INFINITY QUICK

CHANGE CHUCKNOVA TITAN

www.teknatool.comNOVA: Smart Tools, Powerful Solutions

Bowl Jaw #1SKU 8301

Bowl Jaw #3SKU 8303

Saw Tooth #2SKU 8312

Upgrade KitSKU 8100

Retro-fit KitSKU 8200

Smooth Column #1SKU 8321

Saw Tooth #1SKU 8311

Bowl Jaw #2SKU 8302

For more information visitwww.novainfinitychuck.com

NOVA Soft JawsSKU 6021

Able to be cut & custom moulded by the user to their specific holding requirements.Markless holding- the nylon material holds most woods without marking.

Mini 20mm JawsSKU JS20N

For work that is below the 25mm Jaws.

10 in 1 Chuck GaugeSKU 10051

Handy gauge enables you to work out your NOVA dovetails easily with many of the useful measuring & gauging functions used in the woodturning workshop.

Woodworm ScrewSKU 10006

Standard with most chucks (check with your local reseller or www.teknatool.com).

NOVA Dovetail ChiselSKU 6008

Ensures a dovetail with a sharp, clean edge to match-up exactly to the dovetail contour of the NOVA Accessory Jaws.

NOVA Universal SpannerSKU 23079

Features over 4 different NOVA specific functions in one tool.

Chuck Spur CenterSKU NCSC

Never take the chuck off of your lathe.Allows you to quick mount a spur center on your chuck.For the bowl turner who also does spindle work.

Faceplate RingSKU 6000, 6001, 6002

Three Sizes Available:50mm (2”) fits 50mm jaws, Faceplate diamter 3”100mm (4”) fits 100mm jaws, Faceplate diameter 5”130mm (5”) fits 130mm jaws, Faceplate diamter 6.25”

75mm (3”) Long Nosed JawsSKU 6017

A 50mm 2” rise above their mounting base means very long reach deep inside of bowls.

Mini Spigot JawsSKU 6026

Powerful & rigid grip for small spigot turning.For small bowl work.

Mini Step JawsSKU 6025

Gripping bowls in expansion mode.3 step sizes provide optimum gripping.

Step Jaw SetSKU JS75DT

Great for gripping the base of footed bowls in the contracting mode.

25mm (1”) Jaw SetSKU JS25N

One of our most popular & convenient jaws for small bowl & small spigot turning work. Ideal for mini/midi lathe work.

Pin Jaw Set (1”)SKU JSPIN

These extended jaws are designed to act like a pin chuck- expanding into a pre-bored hole.

Spigot Jaw 35mm (1.375”)SKU JS-SP35

Provide strong contracting grip to unsupported spigot turning applications.

35mm (1.35”) Bowl JawsSKU 6019

The 35mm bowl jaws fit perfectly into the current jaw range, picking up a small gap left between the 35mm & the 50mm.

Spigot Jaw 45mm SKU JS-SP45

Grips to unsupported spigot turning.

50mm (2”) Bowl JawsSKU JS50N

These jaws are standard with all NOVA chucks (excluding Infinity Chuck)

100mm Jaw SetSKU JS100N

Designed for expanded dovetail, reverse dovetail for gripping.

75mm (3”) Bowl JawsSKU 6014

The dovetail walls are 3x the thickness of conventional jaw types for rugged work holding for larger/heavier bowl work.

70mm JawsSKU JS70N

Perfect for bowl & spigot projects.

130mm Jaw SetSKU JS130N

Handle large work 750mm in diameter.

Powergrip Jaw SetSKU JSPN

Powerful jaw for large spigot/ hollow turning.

Cole Jaw SetSKU JSCOLE

Suitable for lathes with minimum 12”/300mm swing diameter.

Mini Cole Jaw SetSKU 6006

Suitable for lathes with minimum 8” swing diameter.