PRECISION GRANULATION MG LINE - Shred-Tech® · ***Shred-Tech performs particle size analysis with new shredders in a controlled test environment. Particle size is affected by knife

COMPLETE INFORMATION DESTRUCTION AND RECYCLING SOLUTIONS

www.shred-tech.com | [email protected]

tf. 1.800.465.3214 | t. 519.621.3560 | f. 519.621.4288

Service Hotline: 1.877.566.2345

All rights reserved. Shred-Tech and Shred-Tech logo are registered trademarks of Shred-Tech. Specs correct at press time, and may change without notice. 190605

granulators

MG LINEPRECISION GRANULATION

OUR FULL PRODUCT LINE

Mobile Collection Trucks

Two-Shaft Shredders

Mobile Shredding Trucks

HAAS Primary Shredders

Four-Shaft Shredders

Single-Shaft Shredders

Granulators



tf. 1.800.465.3214 | t. 519.621.3560 | f. 519.621.4288


SHRED-TECH’SGREEN COMMITMENT

Annually, we help save over 15,000,000 Trees

Shred-Tech is committed to providing

the most efficient and environmentally

friendly shredding and collection vehicles

available, and we are pleased to introduce

new features and equipment that follow

Shred-Tech’s Environmental Stewardship.

...............

ENVIRONMENTAL STEWARDSHIPOur Truck Fleet meets the EPA’s strict new low emissions standards and operates on ULSD (ultra-low sulfur diesel fuel) or B5 Biodiesel fuel. Every year, the paper shredded and recycled by Shred-Tech-built trucks, saves over 15,000,000 trees! Shred-Tech continually focuses on ways to help you grow your business while reducing your carbon footprint.

Legal Payload Capacity is an estimate based on chassis GVWR only. Actual payload can vary depending on many factors including paper type, weather conditions, and system maintenance. Shred-Tech does not guarantee payload results. All rights reserved. Shred-Tech and Shred-Tech logo are registered trademarks of Shred-Tech. Specs correct at press time, and may change without notice. 180920

Thinking Green Since Day One!

2 Year-Limited Warranty

LOCKBOX SERIES THE FUSION OF PRODUCTIVITY & CONVENIENCE

LOCKBOXMOBILE COLLECTION TRUCKS

CUTTING CHAMBER

The ST-15 shredder features Shred-Tech’s cast aluminum shredder body with patent pending “cast-in” steel cleaning fingers. KNIVES

Shred-Tech Engineers have designed each knife profile and configuration to suit the application for maximum throughput, and optimum shred size. DRIVE SYSTEM

The ST-15 shredder is available with a wide range of gear reduced drive ratios fitted with 10, 20, 25 or 30 HP electric motors. CONTROL PANEL

The ST-15 control panel, designed by certified Shred-Tech technicians, features illuminated function buttons, keyed power switch, fused lockable disconnect, hour meter and a programmable logic controller for shredder functions, including knife reversal on overload. HOPPER AND STANDS

Quality is evident in the workmanship of Shred-Tech’s extra heavy duty stand and hopper. As an option, the stand and hopper can be modified to suit the application or installation. HEX SHAFTS

The unique design of the machined hex shafts maximizes knife placement options and allows for easy knife removal and machine maintenance. Size for size, the hex shaft is several times stronger than a keyed shaft. The Shred-Tech hex shaft drive system, offers the highest knife-tip cutting force of any comparable shredder on the market.

ST-15

STANDARD FEATURES

The ST-15 is designed for maximumuse with a wide range of materialsand optimum shred size.

Compact size and superior performance makes this model ideal for any shredding company.

The ST-15 reduces data tapes, books, confidential documents & other materials to a secure shred size providing you with higher security. It does more, so you can DO MORE!

2 - SHAFT SHREDDER

CUTTING CHAMBER

The ST-400 shredders are available in four large cutting chamber sizes, 46” x 53”, 46” x 65”, 46” x 76” and 46” x 87”.

KNIVES

Shred-Tech Engineers have designed each knife profile and configuration to suit the application for maximum throughput, and optimum shred size.

DRIVE SYSTEM

The ST-400 shredder is available with dual 75, 100 or 150HP electric motors.

CONTROL PANEL

The ST-400 control panel, designed and fabricated by certified Shred-Tech technicians, features illuminated function buttons, keyed power switch, fused lockable disconnect, hour meter and a programmable logic controller for shredder functions, including knife reversal on overload.

HOPPER AND STANDS

Quality is evident in the workmanship of Shred-Tech’s extra heavy duty stand and hopper. As an option, the stand and hopper can be modified to suit the application or installation.

HEX SHAFTS

The unique design of the machined hex shafts maximizes knife placement options and allows for easy knife removal and machine maintenance. Size for size, the hex shaft is several times stronger than a keyed shaft. The Shred-Tech hex shaft drive system, offers the highest knife-tip cutting force of any comparable shredder on the market.

ST-400

STANDARD FEATURES

High performance and versatility makes thismodel ideal for any shredding company.

The ST-400’s applications include steel drums, auto and truck tires, castings, municipal and industrial waste, metals and various other applications. It does more, so you can DO MORE!

2 - SHAFT SHREDDER

The ST-400 is designed for maximum use with a wide range of materialsand optimum shred size.


SELECT SERIES OUR MOST VERSATILE & EFFICIENT PAPER COLLECTION TRUCK

SELECTMOBILE COLLECTION TRUCKS



tf. 1.800.465.3214 | t. 519.621.3560 | f. 519.621.4288










...............

ENVIRONMENTAL STEWARDSHIPOur Truck Fleet meets the EPA’s strict new low emissions standards and operates on ULSD (ultra-low sulfur diesel fuel) or B5 Biodiesel fuel. Every year, the paper shredded and recycled by Shred-Tech-built trucks, saves over 15,000,000 trees! Shred-Tech continually focuses on ways to help you grow your business while reducing your carbon footprint.

Legal Payload Capacity is an estimate based on chassis GVWR only. Actual payload can vary depending on many factors including paper type, weather conditions, and system maintenance. Shred-Tech does not guarantee payload results. All rights reserved. Shred-Tech and Shred-Tech logo are registered trademarks of Shred-Tech. Specs correct at press time, and may change without notice. 180914


MDS-LINEMOBILE SHREDDING TRUCKS

MDS-LINE MOBILE SHREDDING TRUCKSAMAZING PERFORMANCE.




tf. 1.800.465.3214 | t. 519.621.3560 | f. 519.621.4288










...............

ENVIRONMENTAL STEWARDSHIPOur MDS Fleet meets the EPA’s strict new low emissions standards and operates on ULSD (ultra-low sulfur diesel fuel) or B5 Biodiesel fuel. All MDS trucks are equipped with Shred-Tech’s Predictive Idle with auto shutdown and remote panel start/stop. Predictive Idle senses low shredder loads and shuts off the high engine idle when the shredder is unattended and the hopper is empty. Moments later the PTO’s are turned off along with the engine, reducing fuel consumption and lowering engine hours.

*Throughput is an estimate based on actual test data and can vary depending upon many factors, including paper type, system maintenance and operator training. **Legal Payload Capacity is an estimate based on chassis GVW only. Actual payload can vary depending on many factors including paper type, weather conditions, and system maintenance. Shred-Tech does not guarantee throughput or payload results. All Shred-Tech Shredders are available under US Federal Supply Contract.® All rights reserved. Shred-Tech and Shred-Tech logo are registered trademarks of Shred-Tech. Specs correct at press time, and may change without notice. 181001


TYRON SERIES DOUBLE SHAFT

PRIMARY SLOW SPEEDSHREDDER

STQ-100

The STQ-100 is designed to process bulk materials including wood, plastics, textiles, electronic equipment, medical waste, organic waste, manufactured products and various other materials, reducing them to a uniform particle size in a single pass.

It does more so you can DO MORE!

STANDARD FEATURES

CUTTING CHAMBER

STQ models are available in a wide variety of cutting

chamber sizes to meet the demands of various

materials in all possible shapes, sizes and material

loading methods.

HEX SHAFTS

Shred-Tech’s standard durable hex shafts and

robust drive systems are at the heart of the STQ

line of shredders, ensuring years of reliable service.

Engineers have focused a high degree of attention

on building a line of four shaft shredders that are

maintenance friendly and allow for quick and easy

change out of components.

CONSTRUCTION

Heavy-duty construction based around Shred-Tech’s

standard torsion tube body concept ensures robust

trouble free operation. Shred-Tech’s proprietary

triple seal cutting chamber, abrasion resistant wear

components and exceptionally high knife tip cutting

force ensure low noise and vibration, reduced wear

and decreased maintenance costs.

ROLLOUT

Rollout screens are easily removed from the end

of the shredder, allowing for quick and easy screen

cleaning and effi cient change out of alternate screen

sizes.

MAINTENANCE

Simplifi ed modular construction reduces the

number of major components and increases

parts commonality; thus reducing spare parts

requirements. Bulkhead walls and labyrinth barriers

at either end of the cutting chamber provide excellent

bearing and seal protection. A light weight chamber

plate ensures cutting chamber disassembly is quick

and easy. Bearing and seal replacement is easily

completed without the need of gearbox disassembly.

4-Shaft Shredder



tf. 1.800.465.3214 | t. 519.621.3560 | f. 519.621.4288










...............

ENVIRONMENTAL STEWARDSHIPOur MDX Fleet meets the EPA’s strict new low emissions standards and operates on ULSD (ultra-low sulfur diesel fuel) or B5 Biodiesel fuel. All MDX trucks are equipped with Shred-Tech’s Predictive Idle with auto shutdown and remote panel start/stop. Predictive Idle senses low shredder loads and shuts off the high engine idle when the shredder is unattended and the hopper is empty. Moments later the PTO’s are turned off along with the engine, reducing fuel consumption and lowering engine hours.

*Throughput is an estimate based on actual test data and can vary depending upon many factors, including paper type, system maintenance and operator training. **Legal Payload Capacity is an estimate based on chassis GVW only. Actual payload can vary depending on many factors including paper type, weather conditions, and system maintenance. Shred-Tech does not guarantee throughput or payload results. ***Shred-Tech performs particle size analysis with new shredders in a controlled test environment. Particle size is affected by knife wear, shredder condition, operating conditions and types of paper being shredded; any variations in these parameters will affect particle size. Therefore Shred-Tech does not guarantee shred size nor does Shred-Tech warrant compliance to any particle size standard including but not limited to standards issued by the following organizations; DIN, NAID, BSIA, RCMP.

All Shred-Tech Shredders are available under US Federal Supply Contract.® All rights reserved. Shred-Tech and Shred-Tech logo are registered trademarks of Shred-Tech. Specs correct at press time, and may change without notice. 181001



MDX-LINE MOBILE SHREDDING TRUCKSULTRA HIGH SECURITY

MDX-LINEMOBILE SHREDDING TRUCKS

@ShredTechCorp

Facebook.com/ShredTechCorp

Youtube.com/shredtechvideosshred-tech.comshred-tech.com 800.465.3214

SHRED-TECHGRANULATORFEATURES & APPLICATIONS STG-Line

SHRED EVERYTHING

The STG-Line is designed especially for defined size reduction of various materials in a single pass and is manufactured to exacting quality control standards, ensuring maximum granulator durability. Whatever the application, we have a granulator that will SHRED EVERYTHING!

FEATURES STG-2 STG-3 STG-3L STG-4 STG-4L STG-5 STG-5L STG-6 STG-6L STG-8

Reinforced all welded steel construction S S S S S S S S S S

Available abrasion resistant wear components S S S S S S S S S S

Two piece cutting chamber at an inclined angle S S S S S S S S S S

External bearings & housings S S S S S S S S S S

Knife setting gauge supplied S S S S S S S S S S

Air extraction discharge S S S S S S S S S S

Screw conveyor discharge S S S S S

Custom hoppers, chutes & stands O O O O O O O O O O

Access doors to rotor & bed knives O O O O O O O O O O

Pedestal control panel O O O O O O O O O O

Feed/discharge conveyors & bin tippers O O O O O O O O O O

Pneumatic discharge O O O O O O O O O O

Dust control O O O O O O O O O O

Material sorting & separation equipment O O O O O O O O O O

PLC interfacing for auxiliary equipment O O O O O O O O O O

Modem capabilities O O O O O O O O O O

Rotor styles - V-Rotor, Front Set V, Back Set V, S-Rotor, C-Rotor O O O O O O O O O O

Various rotor widths & motor power O O O O O O O O O O

Various screen opening diameters O O O O O O O O O O

Wear resistant rotor & screen material O O O O O O O O O O

Rotor cooling O O O O O O O O O O

S= Standard O= Optional*Recommended applications referenced. Additional applications may be permitted based on processing level. Please contact a Sales Representative for specifi cations.

APPLICATIONS*

MODEL

STG-2/3/4/5/6 S S S S S S S

STG-3L/4L S S S S S S S S S S S S S

STG-5L/6L/8 S S S S S S S S S S S S S

Plastic Sheets

Packing Material

Medical Waste

Bulk ContainersPlastic FilmWood Paper Fabric Rubber Furniture

High Vol. Processing

Plastic Purgings Fiberglass

STS ST STQ STX STGSTS ST STQ STX STG

NORTH AMERICAHead Offi ceT: +1 (519) 621-3560TF: +1 800-465-3214

North Carolina Service T: +1 (919) 387-8220

SHRED-TECH

UK & EuropeGlobal Recycling Solutions Ltd.T: +44 (0) 1476 568384

AustralasiaT: +61 (0) 498 730 684

GranulationPRECISION

MG400 LINEgranulators

The MG-Line of granulators are designed to process blown films, thermoformed, roto-moulded and injection-moulded parts, extrusions, rubber products and more.

Standard features include shaft bearings mounted outside the chamber walls to prevent contamination, water jets for the cooling of materials with ultra-low melting points and high efficiency drives to name a few. The unique angle between the cutting blades and counter blades reduce fines and save energy. These are just a few of the features that make the MG-Line a versatile machine for all of your shredding needs.

APPLICATIONSSingle stream or mixed plastics reduction of purgings, lumps, sprues, runners, tough fibres, thin films, plastic waste and rejects from injection and blow moulded processes.

MG400/5 MG400/8 MG400/10

MG800 LINEMG800/10 MG800/12 MG800/16 MG800/20

MG400 LINE MG400/10MG400/8MG400/5

1,600 x 1,350 x 1,500 mm63 x 53 x 59 in

1,600 x 1,050 x 1,500 mm63 x 41 x 59 in

Overall Dimensionsl x w x h

1,600 x 1,550 x 1,700 mm63 x 61 x 67 in

400 mm15.75 in

400 mm15.75 in

Rotor Diameter400 mm15.75 in

18.5 kW25 HP

20 mm0.79 in

11 kW15 HP

15 mm0.59 in

Motor

Blade Thickness

30 kW40 HP

30 mm1.18 in

400 x 800 mm15.75 x 31.5 in

400 x 600 mm15.75 x 23.625 in

Cutting Chamberl x w

400 x 1,000 mm15.75 x 39.37 in

3,100 kg6,834 lbs

2,800 kg6,173 lbs

Weight4,050 kg8,929 lbs

Integrated / AdjustableIntegrated / AdjustableBlades Integrated / Adjustable

2,200 x 2,450 x 1,700 mm86.6 x 96.5 x 67 in

800 mm31.5 in

800 x 2,000 mm31.5 x 78.7 in

MG800 LINE MG800/12 MG800/16 MG800/20MG800/10

1,900 x 1,650 x 1,600 mm74.8 x 65 x 63 in

1,900 x 1,450 x 1,600 mm74.8 x 57 x 63 in

Overall Dimensionsl x w x h

2,100 x 2,050 x 1,600 mm82.6 x 80.7 x 63 in

800 mm31.5 in

800 mm31.5 in

Rotor Diameter800 mm31.5 in

90 kW120 HP

75 kW100 HP

Motor110 kW150 HP

160 kW215 HP

800 x 1,200 mm31.5 x 47.24 in

800 x 1,000 mm31.5 x 39.37 in

Cutting Chamberl x w

800 x 1,600 mm31.5 x 63 in

3,900 kg8598 lbs

3,300 kg7275 lbs

Weight5,800 kg12,787 lbs

8,900 kg19,621 lbs

Integrated / Adjustable

30 mm1.18 in


30 mm1.18 in

Blades

Blade Thickness


40 mm1.57 in


40 mm1.57 in

Documents

PRECISION GRANULATION MG LINE - Shred-Tech® · ***Shred-Tech performs particle size analysis with new shredders in a controlled test environment. Particle size is affected by knife