PreCheck in - auto shipment = off

PreCheck in - auto shipment = off

We start with the auto shipment set-up.

Auto shipment is OFF.

PreCheck in - auto shipment = off

Stap 1

This is the car we are going to pre check in  in the next step.

PreCheck in - auto shipment = off

Stap 2

As you can see, the car is not marked for auto shipment.

Druk op [Tab].

PreCheck in - auto shipment = off

Stap 3

Now we are going to make the pre check in.

Druk op [Tab].

PreCheck in - auto shipment = off

Stap 4

This is the check in branch as taken from the agreement.

BUG: We need a set up to define a default pick up branch.

Now we set pick up branch 777 by hand.

Klik in het veld.

PreCheck in - auto shipment = off

Stap 5

Desired situation: When pick up is selected as YES then the default pick up Branch is set as Check in Branch.

BUG: We need a set up to define a default pick up branch.

Klik op het lijstitem YYes.

PreCheck in - auto shipment = off

Stap 6

Now we enter the pick up postal code.

Question: Is it neede to set a location per postal code in the table? And how does Rentpro deal with more than one Pickup locations on the same postalcode?

Druk op [Tab].

PreCheck in - auto shipment = off

Stap 7

BUG: In the specifications we defined that Rentpro sets the Serving Branch automatically defined on the postal code (and not related to the location).

Laat de muisknop los.

PreCheck in - auto shipment = off

Stap 8

Now we get the selection list ans the right Serving Branch is shown.

This one should be set as servering Branch automatically.

Klik op de knop Select.

PreCheck in - auto shipment = off

Stap 9

BUG: The Transporter should also be set automatically.

Now a complete list of transporters is shown.

We choose transporter 2.Klik op de knop Select.

PreCheck in - auto shipment = off

Stap 10

Then we get a Invalid Tranporter message. This is a correct message based on the postal code settings.

Desired situation: We want Rentpro to set the Serving Branch and Tranporter based on the postal code matrix and the user is not allowed to change it.Klik in het veld.

PreCheck in - auto shipment = off

Stap 11

Now we choose transporter 1000  which is the right one.Druk op [Tab].

PreCheck in - auto shipment = off

Stap 12

Druk op [Tab].

PreCheck in - auto shipment = off

Stap 13

Druk op [Tab].

PreCheck in - auto shipment = off

Stap 14

Now we get a confirmation screen which is good.Klik op de knop Exit.

PreCheck in - auto shipment = off

Stap 15

Then the shipment is mailed as set up. Which is good.

PreCheck in - auto shipment = off

Stap 16

Klik op de knop OK.

PreCheck in - auto shipment = off

Stap 17

The agreement is pre checked in. And the shipment is created correct.

BUG:But the vehicle transaction is not updated right as you can see in the next frame.

Laat de muisknop los.

PreCheck in - auto shipment = off

Stap 18

BUG: The shipment is correct, but the vehicle transaction is not updated to the right destinations Branch.

Klik op het gewenste object.

PreCheck in - auto shipment = off

Stap 19

Shipment is pending. Which is good.

Schuif het object met het muiswiel.

PreCheck in - auto shipment = off

Stap 20

Shipment is send by mail (faxserver in our case) and received by the tranporter.

BUG: AAN: Inname locatie (destination branch) should be filled with AAN: <<Tranporter>>.

Laat de muisknop los.

PreCheck in - auto shipment = off

Stap 21

now we accept the shipment by hand.

Klik op het lijstitem AAccepted.

PreCheck in - auto shipment = off

Stap 22

And we get the question to send the pre_shipment mail.

BUG: This mail is not send, or not send by the correct mailserver.We should sent is with mailserver 2 (faxmailserver)

Klik op de knop Proceed.

PreCheck in - auto shipment = off

Stap 23

Klik op de knop Ja.

PreCheck in - auto shipment = off

Stap 24

Now it is finished.

Einde van procedure