Upload
jasia
View
248
Download
0
Tags:
Embed Size (px)
DESCRIPTION
). 2. –. Preoxidation : Peroxydisulfate ( (NH 4 ) 2 S 2 O 8 ). Sodium bismuthate ( NaBiO. ). 3. Hydrogen peroxide (H2O2). Preadjustment of analyte oxidation state. - PowerPoint PPT Presentation
Citation preview
Preadjustment of analyte oxidation state
It is necessary to adjust the oxidation state of the analyte to one that can be titratedwith an auxiliary oxidizing or reducing agent.
Ex. Preadjustment by auxiliary reagent
Fe(II), Fe(III) Fe(II)4–
Titration
Ce4+
Preoxidation : Peroxydisulfate ( (NH4)2S2O8 )2– )
Sodium bismuthate ( NaBiO3)
Hydrogen peroxide (H2O2)
920310 1http:\\asadipour.kmu.ac.ir 33 slides
Prereduction : Stannous chloride ( SnCl2) Chromous chloride Jones reductor (zinc coated with zinc amalgam) Walden reductor ( solid Ag and 1M HCl)
Reagents used in redox titration
Reducing agents
1) ammonium iron(II) sulfate hexahydrate (Mohr’s salt) FeSO4(NH4)2SO4· 6H2O
2) iron(II) ethylene diamine sulfate (Oesper’s salt) FeC2H4(NH3)2(SO4)2· 4H2O
3) Sodium thiosulfate pentahydrate Na2S2O3·5H2O
4) Arsenic trioxide: arsenious oxide As2O3
5) Sodium oxalate and oxalic acid dihydarte Na2(COO)2 , (COOH)2·2H2O
920310 4http:\\asadipour.kmu.ac.ir 33 slides
Sodium thiosulfate, Na2S2O3
Thiosulfate ion is a moderately strong reducing agent that has been widely used to determine oxidizing agents by an indirect procedure that involves iodine as an intermediate. With iodine, thiosulfate ion is oxidized quantitatively to tetrathionate ion according to the half-reaction:
2S2O3 2– S4O6
2– + 2e Eo = 0.08
Ex. Determination of hypochlorite in bleaches [CaCl(OCl)H2O]:
OCl– + 2I– + 2H+ Cl– + I2 + H2O (unmeasured excess KI)
I2 + 2 S2O3 2– 2I– + S4O6
2–
Indicator: soluble starch (-amylose)920310 5http:\\asadipour.kmu.ac.ir 33
slides
Standardization of thiosulfate solution:
Primary standard : potassium iodate (KIO3), K2Cr2O7, KBrO3
Titration reactions:
KIO3 + 5KI + 6HCl 3I2 + 6KCl + 3 H2O
I2 + 2Na2S2O3 2NaI + Na2S4O6
KIO3 3I2 6Na2S2O3·5H2O 6 Equivalent
S2O32- +H+ ⇋ HSO3- +S(s)pH, Microorganisms, Concentration, Cu2+, Sunlight
Stabilizer for sodium thiosulfate solution : Na2CO3
Na2S2O3 + H2O + CO2 Na2CO3 + H2S2O3
H2S2O3 H2SO3 + S920310 6http:\\asadipour.kmu.ac.ir 33
slides
920310 7http:\\asadipour.kmu.ac.ir 33 slides
16-2 Finding the end point
A redox indicator is a compound
that changes color
when it goes from its oxidized
to its reduced state.
or
For ferroin, with E° = 1.147 V
we expect the color change to occur in the approximate range
1.088 V to 1.206 V with respect SHE
920310 8http:\\asadipour.kmu.ac.ir 33 slides
920310 9http:\\asadipour.kmu.ac.ir 33 slides
Starch is the indicator of choice for those procedures involving iodine because it forms an intense blue colourwith iodine. Starch is not a redox indicator; it responds specifically to the presence of I2,
not to a change in redox potential.
Starch-Iodine Complex
Structure of the repeating unit of the sugar amylose.
920310 10http:\\asadipour.kmu.ac.ir 33 slides
Arsenious oxide, As4O6
As4O6 + 6H2O = 4H3AsO3
H3AsO3 + I3– + H2O = H3AsO4 + 3I– + 2H+
920310 11http:\\asadipour.kmu.ac.ir 33 slides
Reagents used in redox titration
Oxidizing agents
1) Potassium permanganate KMnO4 : Permanganometry
2) Ceric sulfate / Ceric ammonium sulfate Ce(SO4)2·2(NH4)2SO4· 4H2O : Cerimetry
3) Potassium dichromate K2Cr2O7 : Dichrometry
4) Iodine I2 : Iodimetry, Iodometry
5) Potassium iodate KIO3 : Iodatimetry
6) Potassium bromate KBrO3 : Bromatimetry
920310 12http:\\asadipour.kmu.ac.ir 33 slides
920310 13http:\\asadipour.kmu.ac.ir 33 slides
Permanganate titration
Oxidation with permanganate : Reduction of permanaganate
KMnO4 Powerful oxidant that the most widely used.
1) In strongly acidic solutions (1M H2SO4 or HCl, pH 1)
MnO4– + 8H+ + 5e = Mn2 + + 4H2 O Eo = 1.51 V
KMnO4 is a self-indicator.
2) In feebly acidic, neutral, or alkaline solutions
MnO4– + 4H+ + 3e = MnO2 (s) + 2H2 O Eo = 1.695 V
3) In very strongly alkaline solution (2M NaOH)
MnO4– + e = MnO4
2 – Eo = 0.558 V
920310 14http:\\asadipour.kmu.ac.ir 33 slides
Permanganate titration
Duration of colour in end point (30 seconds)
MnO4– + 3Mn2+ + 2H2O 5MnO2 + 4H+ K=1*1047
Stability of aqoues solution of MnO4-
MnO4– + 2H2O 4MnO2 (s) + 3O2 (g) +4OH-
920310 15http:\\asadipour.kmu.ac.ir 33 slides
Standardization of KMnO4 solution
Potassium permanganate is not primary standard, because traces of MnO2
are invariably present.
Standardization by titration of sodium oxalate (primary standard) :
2KMnO4 + 5 Na2(COO)2 + 8H2SO4 = 2MnSO4 + K2SO4 + 5Na2SO4 + 10 CO2 + 8H2O
2KMnO4 5 Na2(COO)2 10 Equivalent
920310 16http:\\asadipour.kmu.ac.ir 33 slides
Preparation of 0.1 N potassium permanganate solution
KMnO4 is not pure.
Distilled water contains traces of organic reducing substances
which react slowly with permanganate to form hydrous managnese dioxide.
Manganesse dioxide promotes the autodecomposition of permanganate.
1) Dissolve about 3.2 g of KMnO4 (mw=158.04) in 1000ml of water,
heat the solution to boiling, and keep slightly below the boiling point for 1 hr.
Alternatively , allow the solution to stand at room temperature for 2 or 3 days.
2) Filter the liquid through a sintered-glass filter crucible to remove solid MnO2.
3) Transfer the filtrate to a clean stoppered bottle freed from grease with cleaning mixture.
4) Protect the solution from evaporation, dust, and reducing vapors, and keep it in the dark or in diffuse light.
5) If in time managanese dioxide settles out, refilter the solution and restandardize it.
920310 17http:\\asadipour.kmu.ac.ir 33
slides
920310 18http:\\asadipour.kmu.ac.ir 33 slides
Applications of permanganometry
(1) H2O2
2KMnO4 + 5 H2O2 + 3H2SO4 = 2MnSO4 + K2SO4 + 5O2 + 8H2O
(2) NaNO2
2NaNO2 + H2SO4 = Na2SO4 + HNO2
2KMnO4 + 5 HNO2 + 3H2SO4 = 2MnSO4 + K2SO4 + 5HNO3 + 3H2O
(3) FeSO4
2KMnO4 + 510 FeSO4 + 8H2SO4 = 2MnSO4 + K2SO4 + 5Fe2(SO4)3 + 8H2O
(4) CaO
CaO + 2HCl = CaCl2 + H2O
CaCl2 + H2C2O4 = CaC2O4 + 2HCl (excess oxalic acid)
2KMnO4 + 5 H2C2O4 + 3H2SO4 = 2MnSO4 + K2SO4 + 10CO2 + 8H2O (back tit)
(5) Calcium gluconate
[CH2OH(CHOH)4COO]2Ca + 2HCl = CaCl2 + 2CH2OH9CHOH)4COOH
(NH4)2C2O4 + CaCl2 = CaC2O4 + 2 NH4Cl
CaCl2 + H2SO4 = H2C2O4 + CaSO4
2KMnO4 + 5 H2C2O4 + 3H2SO4 = 2MnSO4 + K2SO4 + 10CO2 + 8H2O
920310 19http:\\asadipour.kmu.ac.ir 33 slides
Oxidation with Ce4+
Ce4+ + e = Ce3+ 1.7 V in 1 N HClO4
yellow colorless 1.61 V in 1N HNO3
1.47 V in 1N HCl
1.44 V in 1M H2SO4
Indicator : ferroin, diphenylamine
Preparation and standardization:
Ammonium hexanitratocerate, (NH4)2Ce(NO3)6, (primary standard grade)
Sodium oxalate.
920310 20http:\\asadipour.kmu.ac.ir 33 slides
920310 21http:\\asadipour.kmu.ac.ir 33 slides
Applications of cerimetry
(1) Menadione (2-methylnaphthoquinon: vitamin K3)
O
O
CH3
OH
OH
CH3
2 Ce(SO4)2
HCl, Zn
Reduction
(2) Iron
2FeSO4 + 2 (NH4)4Ce(SO4)4 = Fe2(SO4)3 + Ce2(SO4)3 + 4 (NH4)2SO4
920310 22http:\\asadipour.kmu.ac.ir 33 slides
Oxidation with potassium dichromate
Cr2O72– + 14H+ + 6e = 2Cr3+ + 7H2O Eo = 1.36 V
K2Cr2O7 is a primary standard.
Indicator : diphenylamine sulphonic acid
920310 23http:\\asadipour.kmu.ac.ir 33 slides
Ex. Redox titration ( hydroquinone vs dichromate standard solution )
HO OH O O + 2H+ + 2e Eo= 0.700
Cr2O72– + 14H+ + 6e 2 Cr3+ + 7 H2O Eo= 1.33
3
3 HO OH + Cr2O72– + 8H+ 3 O O + 2 Cr3+ + 7 H2O
Eo= Eocathode – Eo
anode = 1.33 – 0.700 = 0.63 V
K = 10 nEo/0.05916 = 10 6(0.63) / 0.05916 = 10 64
redox indicator : diphenylamine
colorless to violet
Very large : quantitative : complete reaction
920310 24http:\\asadipour.kmu.ac.ir 33 slides
Iodimetry and iodometry
• Iodimetry: • a reducing analyte is titrated directly with iodine
(to produce I−).• • iodometry : • an oxidizing analyte is added to excess I− to
produce iodine, which is then titrated with standard thiosulfate solution.
920310 25http:\\asadipour.kmu.ac.ir 33 slides
I2 + V.C→ 2I- + ……
I- + Cu2+→ I2 + Cu+
I2 + S2O32- → 2I- + S4O6
2-
1) Iodine only dissolves slightly in water. Its solubility is enhanced by interacting with I-
2) An excellent way to prepare standard I3- is to add a
weighed quantity of potassium iodate to a small excess of KI. Then add excess strong acid (giving pH ≈ 1) to produce I3- by quantitative reverse disproportionation:
3) Cu2++4I- 2CUI + I2
standard I3-
920310 26http:\\asadipour.kmu.ac.ir 33 slides
Stability of I2 Solutions
• In acidic solutions of I3- are unstable because the excess I− is slowly oxidized by air:
• In neutral solutions, oxidation is insignificant in the absence of heat, light, and metal ions.
• At pH ≳ 11, triiodide disproportionates to hypoiodous acid (HOI), iodate, and iodide.
920310 27http:\\asadipour.kmu.ac.ir 33 slides
I2 + OH- ⇌ IO- + I- + H+ 3IO- ⇌ IO3- + 2I-
920310 28http:\\asadipour.kmu.ac.ir 33 slides
Iodimetry
920310 29http:\\asadipour.kmu.ac.ir 33 slides
iodometry
920310 30http:\\asadipour.kmu.ac.ir 33 slides
Bromatimetry
BrO3– + 5Br– + 6H+ 3Br2 + H2O
2I– + Br2 I2 + 2Br–
920310 31http:\\asadipour.kmu.ac.ir 33 slides
I2 + 2 S2O32– 2I– + S4O6
2–
Addition reactions
920310 32http:\\asadipour.kmu.ac.ir 33 slides
Determining water with the Karl Fisher Reagent
The Karl Fisher reaction :
I2 + SO2 + 2H2O 2HI + H2SO4
For the determination of small amount of water, Karl Fischer(1935) proposed a reagent prepared as an anhydrous methanolic solution containing iodine, sulfur dioxide and anhydrous pyridine in the mole ratio 1:3:10. The reaction with water involves the following reactions :
C5H5N•I2 + C5H5N•SO2 + C5H5N + H2O 2 C5H5N•HI + C5H5N•SO3
C5H5N+•SO3–
+ CH3OH C5H5N(H)SO4CH3
Pyridinium sulfite can also consume water.
C5H5N+•SO3–
+ H2O C5H5NH+SO4H–
It is always advisable to use fresh reagent because of the presence of various side reactions involving iodine. The reagent is stored in a desiccant-protected container.
The end point can be detected either by visual( at the end point, the color changes from dark brown to yellow) or electrometric, or photometric (absorbance at 700nm) titration methods. The detection of water by the coulometric technique with Karl Fischer reagent is popular.
920310 33http:\\asadipour.kmu.ac.ir 33 slides